Devanco Canada - Get The Right Garage Door Opener‎ and Parts

Electromechanical slide in edge with a small profile for motorized gates and doors rolling shutters and pinch point protection applications.
Touch sensitive signaling
Temperature range: -30F to 155F
Lead wire: 18 gauge 2ft length
Sensitivity: nominal 4 PSI
2 wire NO configuration

.......more details

RADIO-RE901

Manaras 1-Channel 24V Dip-Switch (313MHz) & Rolling Code (390MHz) Receiver

For Commercial/Industrial Garage Door Applications
Wall Mount
DIP Switch and Rolling Code Technology
Sixteen (16) Fixed Codes / Receiver
313 MHz Radio Frequency
Controls One (1) Door

.......more details

Programming instructions Manual Sell sheet Manual

RADIO-RE901A

Manaras 1-Channel 24V Dip-Switch (313MHz) & Rolling Code (390MHz) Receiver with Commercial Antenna

For Commercial/Industrial Garage Door Applications
Wall Mount
DIP Switch and Rolling Code Technology
Sixteen (16) Fixed Codes / Receiver
313 MHz & 390MHz Radio Frequency
Controls One (1) Door

.......more details

Programming instructions

LZE500

Erone L & Z-Bracket for Maglock ESM500

CAP378

Capacitor 110/125VAC 378-454MFD

378-454 mF 125 VAC 50/60 Hz
Used on 1/2 HP LiftMaster operators

36045A

Genie Helical Gear 2040L

Helical gear assembly for the Genie #2040L garage door opener.
Same as: 36045AS 36045. 36045A 36045S
Includes: Helical and limit gear screws clips and small tube of grease.

VS-GSLG-723

Linear Industrial Duty Variable Speed Slide Gate Op. 2 HP 230V 3 PH

Up to 24" per second gate speed
Max gate length: 100 ft
Max gate weight: 4000 lbs
Integral APeX Controller
Soft start/soft stop
Programmable speed control

.......more details

Installation manual Spec sheet

DW-3S-300

Fraba Air Wave Switch Larger Housing with Copper End NOC

Fraba DW3S-300 air switch 10008797-2
Normally Open Contact (NOC)
Screw Type Connector
Dimensions: 158x60x39 mm (6.22" x 2.36" x 1.54 '')
Housing: ABS Switch: PA6V0 Nema4
Normally Closed Contact achieved by adjusting the sensitivity screw

.......more details

Operating Instructions

MH00027

Micanan Collar 1/2" ID

14000S-20PKG

LiftMaster Sentinal 20' Manual Lift Gate SM Includes Arm and Base

Also known as: 14000S-20
Includes 20ft lift arm and lift base
Non- motorized traffic control for unmanned entrances that do not require credentialed access.
Type: Surface Manual Lift Barrier Gates
Color: Red and White
Length/Weight: 20 ft. (233 lbs. ea.)

.......more details

K1A6408

LiftMaster APE Kit 24V

For use with various LiftMaster® Swing Gate and Slide Gate Operators

PS12D2A

LiftMaster Passport Power Supply Plug-In 12VDC 2A (02A1699-1/ ST122A)

Same as #002A1699-1

MD-00515

Micanan Roller Chain #50 Waterproof 10' Pack

MP00129

Micanan Up-Charge Track and #41 Chain for 12' h Door PRO-APTC

For 1/2 HP Micanan trolley operator PRO-APTC

210134

Skylink Pulley Assembly - Belt

Fits Skylink & Mastercraft 046-0266-0 belt model openers

.406-514-L-C

Cut-to-Length Torsion Spring .406 x 5-1/4" Left Hand Wound Coated ** Price by Quote Only

Priced per inch - cones & filler sold seperately
For factory installed cones use part no. C-514-INSTALLED

.343-6-R-C

Cut-to-Length Torsion Spring .343 x 6" Right Hand Wound Coated ** Price by Quote Only

Priced per inch - cones sold seperately
For factory installed cones use part no. C-600-INSTALLED

27222A

Genie Sprocket Bushing *** To extent of Inventory

For Genie Chain Drive or Belt Drive Channel Rails.
Fits the following models: PMX700 PMX1200 GPS00-IC GPS1200-IC
Available to extent of inventory

.421-6-R

Cut-to-Length Torsion Spring .421 x 6" Right Hand Wound Gold

Priced per inch - cones & filler sold seperately
For factory installed cones use part no. C-600-INSTALLED

MA026

LiftMaster Pad Only Yellow For 12' Arm

Pad only - arm not included

ALUM-568

Aluminum 24" x 100' Spool Nutmeg / Brun Muscade # 568

20% thicker than the aluminum sold in retail stores (0.022" )
Gentek # 565
Reverse side is #431 Bright White

Colour chart

.406-6-R

Cut-to-Length Torsion Spring .406 x 6" Right Hand Wound Blue/Yellow

Priced per inch - cones & filler sold seperately
For factory installed cones use part no. C-600-INSTALLED

42GRR-9001

Allen Bradley Series 9000 Photoelectric Sensor Thru-Beam Receiver Unit

nput: 20-40VAC 10-55VDC 4VA

LR110LTB3815

Telco Thru Beam Receiver M12

Remote receiver Series 110
M12 x 1 Housing Size
Nickel Plated Brass Housing Material
15 m Cable Cable Connection
IP 67 Sealing Class

2200-926

Linear Gear Reducer 60:1 Models SWR SWD

STATION080

Manaras 3-btn Push-Button Control Station with Key Lock-Out and Pilot Light Nema 4/12

2 N/O contacts and 1 N/C contact for stop.
Surface mount.
Schneider Elect. part no. XALD04H7

8065

LiftMaster Contractor Series 1/2 HP AC Chain Drive Garage Door Opener **DISCONTINUED

MyQ® Technology enables you to securely monitor and control your garage door opener and houselights with your smartphone tablet or computer.
1/2 HP AC motor with industrial-strength chain drive provides steady performance and lifting power.
Security+ 2.0™ safeguards your household – with every click a new code is sent to the garage door opener so that the door opens only for you.
The Protector System® has safety sensors that project a light beam across the garage door opening automatically reversing the door if anything interrupts the beam.
Comes with: 1-Button Remote Control (891LM) Door Control Button (883LM)

LVB636-11

Laminated Bumper Black 6" Projection Vertical Installation 36" x 11" Sold Individually

For use in low to medium traffic loading docks in factories and warehouses.
Can be used as rub rails at the sides of truck wells
Fabric reinforced rubber pads cut from recycled truck tires.
Rubber pads laminated between steel angles and secured with 3/4” rods
Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
Wall mounting hole size is 7/8” diameter.

.......more details

KEYSWITCH019

Manaras Single Key Exterior O/C with Stop Button Return to Center Surface Mount

Cast iron end Tamper-proof

CABLE_364SS-250

Cable 3/64" 7x7 250' Stainless Steel

Not for use in aircraft applications
Type: T304

MG00001

Micanan Ribbed Hex Nut 1/2" -13UNC

Used on PRO-GHC
4 required per operator

ALUM-556

Aluminum 24" x 100' Spool Forest Green / Vert Foret # 556

20% thicker than the aluminum sold in retail stores (0.022" )
Gentek # 559
Reverse side is #431 Bright White

Colour chart

F310

Linear GTO Digital Keypad (Wired or Wireless)

As a wired keypad it can operate garage door openers and gate openers that require 24 volts or less and accept normally open contacts.
As a wireless keypad it can be used with any gate or garage door opener that receives a 318 MHz RF signal.
The keypad must be used in conjunction with the GTO garage door receiver kit (part # RB709) on any other garage door.
You may program up to 25 different personal entry codes allowing you to give different entry codes to different users
After entering a valid code pressing any key while the gate is opening will stop the gate; pressing any key while the gate is stopped and the gate will reverse direction.
The keypad will not affect the auto-close setting of your gate opener system.

.......more details

LIMIT-SHFT-ASY-XP

Lynx Complete Limit Shaft Assembly for Explosion Proof Op.

Special order
Includes bearings cams and sprocket

3-44-2

Roller Carrier Only 2-Hole Sold per Piece

Sold per piece no box quantity

16-8002

LiftMaster Cogged Vbelt 4L330

Fits BG790 barrier gate opener

36773R

Genie Carriage Assembly for 7' Door

Works on Genie IntelliG 1000 & 1200 Garage Door Openers
Includes: carriage emergency release rope and straight arm.
Carriage assembly connects to the shuttle assembly and in turn creates the manual release function for the garage door.

BRAKE012

Manaras Band Brake Retrofit Kit Old GH/MGH

Does not include the solenoid
Replaces BRAKEPART012

K72-12509

LiftMaster Output Shaft Kit (3/4 & 1 HP)

For commercial operator model T
Complete with: Output Shaft Bearing Roller Chain with Master Link Limit Chain Shim Washers Roll Pins Push Ring 3/4' and Sprockets (41B32 & 48B10)

10FT-CHAIN-LDO

Linear 10ft Chain T- Rail for LD050/LS050/LDCO (HCT10C)

10ft chain-drive T-rail for LDO33 LDO50 LSO50 LCO75 & LDCO800 door operators
Fully-assembled & pre-tensioned

36051R

Genie Replacement Carrage Assembly

For Genie belt drive garage door opener model 2040L

ANT-1A

Linear 7-inch Rubber Duck Mid-Range Antenna *** To Extent of Inventory

Antenna for Linear’s 27 MHz mid-range transmitters and receivers
Seven-inch ”rubber duck” style
Supplied with CON-180A straight antenna connector
Order CON-90A connector for right angle antenna mounting
Dimensions .65” W x 7” H x .65” D
Same as: SNE00031

.......more details

FD165C

Electric Motor Only 1.5 HP 110V 1Ph 56C Flange

37502

Doorlec DC-2000 Electronic Circuit Board for Constant Pressure Close

Works in all Doorlec model openers except R-99
Input power to board is 120V
24V DC available on terminals 9 & 11
Accessory power on terminals 1 & 11
Programmed to work with constant pressure to close

50-HERK2

Hercules Microwave Motion Detector for Industrial Doors

Opens after sensing an object.
Can be set up to detect vehicles separately from people and bring the two signals to two different outputs
Or use the two outputs to differentiate between forward and backward movements
Detection fields are adjustable - manually or with a remote control (sold separately)
Can be mounted between 8.2' up to 23' with max range of 80'
Reference height of 23' and angle of 45 degrees

.......more details

CHAIN036

Manaras Jackshaft Drive Chain #60 - 1R10'

Includes 1 chain link

MV-00295

Micanan Fraba Nema 4/4X RAY-RT-HD with Reflector

Monitored Retroreflective photocell
Sensing distance: 50 ft
Includes bracket and long range reflector

LIMIT020

Manaras Unimax Snap-Action SPDT without Lever

Single limit switch (SPDT) used to stop the door at top and bottom or as disconnect switch
Unimax
Snap-action

38066R

Genie Series II Intellicode Wall Console GBWC2-BX ** Disc. replaced by 39165R

Series II Multi-Function Wall Console (White Color)
Vacation Lock button disables remote access
Light Control Button
This item has been discontinued and replaced by #39165R

7812

Whiting Bottom Seal Truss Door White 90" Long

Fits Fed-Ex truck doors

MD-00278

Micanan Roller Chain Nickel Plated #410 Sold by the Foot

CHAIN031

Manaras Jackshaft Drive Chain #50 5' with Link

CHS401-114

Chain Hoist Shaft Mount 1-1/4" Shaft 4:1 JR Torque Force (126685)

Shaft Mounted Junior Hoist
4:1 Reduced Drive
Sprocket: 41B36. Bore size: 1-1/4" diameter
Cross Reference: OMI 4020
Requires minimum 3/8" center line offset.
Set includes: 26' of hand chain 22" of #41 roller chain Chain keeper (2) shaft collars 1/4" square key and a wall stabilizer bracket.

.......more details

Sell sheet

757-325

Fasteners Lag Screw Hex Washer Regular Profile 5/16" x 1-5/8" 325/Bag KH

7/16" head
Ideal for fastening tracks to the wall

LDCO800

Linear 800 Newton DC Powered Garage Door Opener Accept Both Belt or Chain Rail *Replaced by LDCO863B*

The energy-efficient DC-powered operator that runs at an AC-equivalent speed.
DC drive motor with soft-start and soft-stop for smooth quiet long-term reliable performance.
Optional Battery Backup available for added peace of mind. Sold separately
Low-power standby mode dramatically reduces energy consumption
Supplies 800 Newtons of lifting force for heavy doors
Compatible with belt-drive or chain-drive T or I beam rails up to 10'

.......more details

Installation manual Sell sheet Remote compatibility chart

226-9313

Lithium AA 3.6V Battery

Used in various types of photo eyes

RBH101L5-RH

LiftMaster 1 HP 115/230 VAC 1 PH Commercial Hoist Operator Logic 5

H-style operators include a floor level chain hoist to ease manual operation in an emergency or power outage.
The operators are typically mounted to the wall when used with larger sectional overhead doors with vertical or high lift and mounted to the wall or the front of the hood when used with rolling doors and grilles.
H operators are attached to the door jackshaft to indirectly drive the door.
With the addition of the 828LM MyQ technology enables the user to monitor and control their operator and light with their smartphone tablet or computer.
Alerts can be received as email or pop-up (push) notifications on a mobile device ensuring the status of your commercial door.
Security+ 2.0™ safeguards your facility – with every click a new code is sent to the commercial door operator so the door opens only for you.

.......more details

Installation manual Manuel d'installation Sell sheet

SLC-221

Linear Commercial Slide Gate Op. 1/2HP 230V 1 Ph - Cold Weather Package NOT Included

Integral entrapment sensing system with digital set point for quick accurate adjustment and enhanced safety
Continuous-tone entrapment alarm with reset button
LED diagnostic display for ease of setup and troubleshooting
Selectable pre-start and run alarm with provision for ADA compliant visual pre-start and run alarm
Regulated 24 Volt DC power available for access control accessories
Integrated maximum run and auto close timer (0-9 minutes)

.......more details

110550

Allstar MVP 3 Channel 24V 3 Terminal 4 Wire Receiver 318 MHz *** NLA

3 channels 4-wire 3-terminal operator connection
Wire antenna included
Compatible with Allstar Classic Allistar and Pulsar dipswitch transmitters and MVP quik-code transmitters
Power: 24 VAC/VDC
Codes: 19683
RF frequency: 318 MHz

.......more details

Programming instructions

19863R

Genie Clip and Collar Rail Connectors

For Genie screw drive units having split rails use a collar and spring clip to join the 3-piece screw.
Complete collar and clip set for one 3-piece rail.
Compatible with all screw drive Genie garage door openers
Set of 2 clips and 2 collars
Same as 19806A04 and 19807A04

GL-24-LED

Guide Lights for Loading Docks Amber LED 12-24VAC/DC 24-3/8" long Sold Individually

LED lights offer long-lasting reliable high-visibility in all weather conditions including direct sunlight with low power consumption.
Robust housing resists impact and corrosion.
Slim discrete design ensures little risk of damage due to accidental impact.
Wide input voltage range of 12-24Vac/dc (control box available for alternate voltages).
Boards coated in water-resistant polymer for optimal protection from water and humidity.
24 LEDs per guide light

.......more details

KPW5

LiftMaster New Wireless Commercial Keypad 5-Code Sec.+2.0

Designed to work exclusively with Security+ 2.0
5 permanent PINs and 10 unique temporary PINs ideal for residential and small commercial applications; unique temporary PINs can be set for 1 to 9 uses
Allows for removal of a single PIN while maintaining full access for other users
High-impact polycarbonate front cover; perfect for rugged outdoor environment
Blue backlit metal keypad makes it easy to use under low-light conditions
Electronics are fully sealed and meet NEMA 4X water protection requirements

.......more details

Programming instructions Instructions de programmation Sell sheet Brochure Compatibility chart

20113R

Genie Limit Switch Screw Drive

For use on Genie screw-drive openers.
Compatible with ALL Genie Screw and Trac Drive garage door openers with standard rail assemblies
Replaces either the UP or the DOWN limit switch
Replaces Genie Genius Trac Drive limit switch models 19795S and 22785R
Not compatible with excelerator models

85870WL

LiftMaster Elite Series 3/4HP AC Chain Drive Wi-Fi Lock Garage Door Opener (8587WL)

MyQ® Technology now with Wi-Fi enables secure monitoring and control of your garage door opener with a smartphone tablet or laptop.
P3™ Motors provide proven reliability and durability.
¾ HP AC Motor Chain Drive System is built to provide maximum power to lift the heaviest doors including carriage house and solid wood.
I-Beam Rail System and reinforced chassis with chain drive provides maximum support.
Security+ 2.0® safeguards garage access – with every click a new code is sent to the garage door opener ensuring the door does not inadvertently open.
Timer-to-Close automatically closes the door after a pre-programmed number of minutes.

.......more details

Receiver Logic Board Conversion List Comparison Chart

XT2564-00-W

Xcluder Rodent Block 4" Black 75' Reel

For commercial and residential applications
Creates a tough barrier that is virtually impenetrable to rodents

Sell Sheet

C16-32FHD

Bearing 1" x 2" Press Fit Heavy-Duty

Flanged ball solid steel bearing
Rating: 1 000 000 revolutions
Axial load: 150lb max
Radial load: 900lb max

124773

Roller 3" UHMW 7-1/4" Stem Rubber

3" UHMW tire covered with rubber
6202 sealed precision bearing
7-1/4" zinc plated stem
Rating: 200lb load; 10000 cycles of a 12' door
Helps quiet the operation of jackshaft operators

MD00044

Micanan Spur Gear 12B60

ZT36640159

Rolling Steel Door Model 702 Firestar No 2 Slat 22-Ga

CP-LX720

Lynx 3-btn O/C/S Transmitter 372 MHz for Commercial Op. with UL325 Board

UL325
Works on the new Lynx commercial operators
Open Close Stop transmitter
Not compatible with the 372MHz residential operators.

Programming instructions Compatibility chart

K-MALED-HDWCB

LiftMaster LED Barrier Arm Hardware Kit

Service kit to connect new LED arm to existing barrier gate
Includes bolts 3" (2) nylon nuts (2) washers (2) 1/2" watertight connector 48" extension cable for breakaway connector "Y" cable and 12 Vdc power supply

MV00021

Swivel Type Pull Cord - SPST Nema 4

Data sheet

R5996

Shaft Collar 1" Split

TR-GUARD

Track Guard Z type 60" high to Protect 3" Track Sold as a Pair

Provides impact protection to vertical track
11 gauge (.125 thick)
Galvanized steel no paint

UCP207-20

Precision Pillow Block Bearing 1-1/4" Bore

6-9/16" overall length
5" hole center to center distance

CB5320500-KOR

Cable 5/32" 7x19 500' Galvanized Supreme

Galvanized cable 5/32" 7x19 500ft spool.
Cable break strength: 2800 lbs
A higher quality cable compared to the Chinese cable.
Meets endurance test requirements of over 35000 work cycles
Lubricated for flexability and longer service life

Comparison charts

105104

Linear Gate Safety Edge Transmitter

105104 is for adding obstacle sensing for motorized gates or barrier arms.
Using a safety edge transmitter is more economical and discrete than the traditional coiled cord connection method.
The transmitter mounts directly on the gate or barrier arm and wires to a standard exterior safety edge sensor.
Compatible with 310 MHz Stanley receivers and Model 109950 302850 and 309013 receivers.
Activates receiver for stop or reverse entrapment
No cables or coiled wires

.......more details

Installation Manual

1104-ASFT-16FT

Elton Aluminum Stiffener for 1104 16ft

Prevents the 1104 from buckling in the hot sun

HDC-411-LH-CONT

Lynx Ind. Jackshaft with Hoist 3/4Hp 115V Contactor Left Hand

1/2 3/4 1HP 115-230-460 or 575V single or three phase motor capacitor start overload and under voltage protection.
Solid state circuit board Lynx-6000. Built in 1.5 second delay.
5L V-belt primary reduction #50 drive chain and sprockets.
Adjustable friction clutch magnetic solenoid brake.
Precision pillow block bearings on output shaft.
Fully driven adjustable limit switches.

.......more details

Sell Sheet

414001

Linear 4-Channel Multi-Code Visor Transmitter 300 MHz

Compatible with 300 MHz Multi-Code receivers
Supplied with visor clip
Easy access to battery and coding switches
Power: 9-volt battery
Codes: 512 codes for each channel (set by dip switches)
RF frequency: 300 MHz

.......more details

Installation Manual

37028G.S

Genie Circuit Board for Retail Model 1022 ** Repl. by 39537R.S (no cover)

Compatible with Genie 1022 1042 ChainLift 600 and QuietLift 600 models.
Purple

M3A

Safety Inertia Brake 1" Bore 2283 Torque PCM3AP

Provides a bearing to support the shaft and prevent the fall of a door if sudden acceleration occurs.
Ideal for commercial and industrial use; specifically with rolling shutters and balanced and well maintained rolling doors.
Fully resettable and reusable after lockout ocurrs.
Commonly paired with commercial safety bottom brackets in sectional door applications.
Fits 1" shaft
Note: Sectional torsion door systems must be well maintained to ensure desired inertia brake activation.

.......more details

S142ARNN924

Carlo Gavazzi Amplifier 24V

Processor controlled amplifier for one set of photoelectric sensors type MOFTR.
11-pin circular plug for easy connection.
8A SPDT relay output NPN/ PNP transistor output or alarm output.
Diagnostics for sensor test during operation.
Alignment help via LED or alternation of alarm output.
Level indication for dirt accumulation.

.......more details

Installation Manual

41ASWG-438SA

LiftMaster Motor with Limit Switch Harness for LA400

Electric motor for LA400

27-48-400

Extension Spring 8' Door - 400 lbs Tan

Single - Loop
27" long 48" stretch 400 lb load
Sold individually
Rated for 10000 cycles

Spec Sheet

H12G07-SS

Hinge #7 x 12 gauge Stainless Steel

Manufactured with 12ga. Rust-Resistant Stainless Steel
Universal Design
Fits Most Overhead Sectional Doors
Priced Per Each

MP-00044

Micanan Drive Chain #40 Modification for Trolley Operators 18' High Door In Lieu of #41

Chain modification when purchased with any of the following operators; PRO-T TB APT and GT

8030196

Marantec Belt Connector Kit

Works for all Marantec Belt Drive Openers
For models: Mac Lift M4500M4700Q7500Q7700 M4500e M4700e
Includes two connector pieces and four screws
Not for use on the heavy duty rails used by Q7900 & M4900e

23-10916

LiftMaster Interlock Switch SPDT

Interlock switch for LM commercial door openers with hoist disconnects
15A 125/250VAC

4J

Rolling Steel 3" Curved Cast Endlock

Endlocks are riveted to curtain slats ends of every other slat to prevent slats from shifting laterally and to prevent curtain wear in guides.
Continuous endlocks are both ends of every slat.
Rivets included with endlocks

17JW

Rolling Steel 2" Flat Cast Windlock

Windlocks are especially used on rolling steel doors and shutters to prevent "blow-ins" from severe storms or winds.
A wind lock is a small metal device that is attached to each slat.
Its primary function is to reduce the amount of friction that occurs between the actual door & the guiding panel.
When the wind is strong the roller door may be dislodged bent or misaligned from the guide.
With a windlock your door can operate efficiently despite wind load or pressure.
Windlocks are easy to add on to any existing rolling steel or shutter door

.......more details

SLT17-20

Rolling Steel 2" Flat Slat 20-ga Galvanized

GH501-L5

LiftMaster Gearhead with Brake 1/2HP 115/230V 1P L5 ***No Longer Available

Gearhead style commercial door operators employ lubricated gears for heavy industrial high cycle applications.
GH-style operators include a floor level chain hoist to ease manual operation in an emergency or power outage.
Hoist wheel is easily moved to Right or Left hand side of unit eliminating the need to order right or left hand mounting.
MyQ Technology enables you to securely monitor and control your facility operator with your smartphone tablet or computer. Internet Gateway 828LM required.
Security +2.0 radio receiver safeguards your facility - with every click a new code is sent to the commercial door operator so the door opens only for you.
Timer-To-Close: Conveniently and confidently closes the commercial door automatically after a predetermined amount of time has elapsed for added security and peace of mind.

.......more details