Devanco Canada - Get The Right Garage Door Opener‎ and Parts

.171-2-3/16-72-RH

Spring Wire .171 x 2-3/16 x 72" RHW Galvanized

2806.177*340

Whiting Spring Assby .177 x 2-3/16 x 34" Roadside

Replacement torsion spring with cones
Specs: .171 x 2-3/16" x 34" Long
Roadside
For Curbside order part # 2807.177*340

SW-200

Devanco Torsion Spring Winder 200 for 1-3/4" to 2-5/8" Torsion Springs

pring Winder 200 is a torsion spring tensioning tool designed for use with a cordless drill (Non-impact). Developed for professionals in the installation and maintenance of residential garage doors. The device prevents work-related accidents and significantly reduces physical strain of door installation work. The Spring Winder 200 is suitable for all residential garage door torsion springsranging from 1-3/4 inches to 2-5/8 inches. Technical Specifications:
Weight: 5 kg / 11 lbs
Length: 56 cm / 22 inches
Max. Torque: 147.51 lb/ft
RPM: 500-2000
Material: Aluminium steel plastic

.......more details

Sell Sheet

SW-500

Devanco Industrial Spring Winder 500 for 3.75" - 6" Torsion Springs

W-500 is an Overhead Garage Door Torsion Spring Tensioning Tool for commercial and industrial sectional doors with springs ranging from 3.75" to 6". It can accommodate both 1.0 and 1.25 diameter shafts. This device prevents work-related accidents and significantly reduces physical strain during the torsion spring cranking process The SW-500 is designed for use with a cordless drill (Non-impact) with a 13mm socket to make the job faster and safer than using winding bars. ***Richard Wilcox springs require the SW-500-ADAPTER. Technical Specifications:
Weight: 8.6 kg / 18.9 lbs
Length: 77.2 cm / 30.39 inches
Max. Torque: 369lb/ft
RPM: 500-2000
Material: Aluminium steel plastic

.......more details

Sell Sheet

DC300-50-1

Dyna-Hoist 300 Series Direct Drive BBU 1/2 HP 110/240V 1" Shaft 40:1 Ratio ** Quote Only

Special-Order. Price by Quote Only
Automated battery backup - the unit continues to work on batteries with full functionality (but does move more slowly) until the unit gets to about 75% of battery capacity then transitions to push and hold operation.
The 300 series also works with and powers 12V automatic lock systems
Option available: 5-conductor cable (5') to reduce the risks of miswiring incidents available in 5' 10' 15' 20' or 25' lengths
Integrated software fuse that shuts down the unit to help prevent board component disasters should these be incorrectly installed on grossly imbalanced or improperly sized doors.
30:1 40:1 50:1 gearbox ratio are available. Please specify when ordering otherwise 40:1 will be supplied

.......more details

10TD900HH1

BEA 1-Button Transmitter 900 MHz

Compact transmitter allowing wireless activation of any door control providing greater line-of-sight distance than legacy wireless frequencies.
It also provides better penetration of obstacles.
Operating temperature: -10 to 55C
IP65

D800-120-1

Cable Drum High Lift 800-120 1" HL Pair

Adjustable cable attachment with screw
Made of aluminum
High Lift capacity: 120" max
Flat capacity: 266" max
Rating: 2200 lb per door max
Keyway: 1 KW of 1/4" width

.......more details

461-0002-08

Richard-Wilcox #31 Square Track 8ft Length Sold per Piece

Used with #7-6095 rollers
Replacement for #75x14g

K21-16699

LiftMaster Transformer 120/240V 75VA 24VAC

For use with various LiftMaster® Speed Jack Commercial Door Operators

MWT12B

Miller Edge Transmitter Binary Nema 4 Enclosure

The MWT12 safety edge transmitter is designed to provide wireless signal transmission form the safety edge to the motor controls.
It is easily mounted and wired to the gate or door edge sensor. When the sensing edge comes into contact with an obstruction a closed circuit signal is created and is sent to the transmitter.
The transmitter relays the information to the receiver and the receiver passes the signal along to the operator motor.
The gate or door stops movement and will then reverse the direction of travel.
Comes standard with a NEMA 4 weather-proof enclosure. The enclosure can be easily mounted with the four mounting holes and screws provided
Response time: 70 milliseconds

.......more details

Installation Instructions MWT12B Spec Sheet MWT12B FAQ MWT12B

210339

Skylink Belt Gear with Holder LQ-803

K41-0254-000

LiftMaster Electric Motor IHSL24UL

Compatible with LiftMaster® Model IHSL24UL Industrial-Heavy Commercial Slide Gate Operators.
Compatible with the following models: IHSL24UL IHSL24ULMC

GUSSET-MOUNT

Doorlec Gusset Mount Plate Up-Charge (L Bracket) GH

Mounting plate for GH op

GHX-353-1.5HP-R

Doorlec Explosion Proof Gear Head 1-1/2 HP 575V 3PH ECB Right Hand

Nema 7/9 control box
Electrical connections from motor to control box consists of hazardous location certified fittings
NEMA 7/9 O/C/S push-button station included

98032

LiftMaster HD Wall Mount Op. DC BBU WiFi

Wall-mount design and ultra-quiet DC motor eliminate noise and vibrations - the quietest openers on the market.
Heavy-lifting power operates lifts doors 400 lbs. to 1100 lbs.
Dynamic 24V DC motor.
Peak power output of 389 Watts unmatched in its class.
A commercial-grade gearbox with bronze alloy gears and a powerful drive system promises durability and performance that stands the test of time.
An electronic monitoring system ensures seamless and smooth operation from beginning to end.

.......more details

98032_Installation-manual 98032_Manuel-installation Logic board replacement instructions Instructions pour remplacer la carte logique Battery holder replacement instructions Instructions pour remplacer le support de batterie Shaft collar instructions Instructions pour le collier d’arbre

PRO-EJ-5011-U

Micanan 1/2HP 115V 1P internal lock sensor Jackshaft Monitored ECB N1 Eyes Left Hand

On board receiver with antenna
Continuous duty industrial motor with overload protection
Heavy duty 5L V-belt
Adjustable friction clutch
Solenoid brake (optional PRO-JB) recommended for large doors
3/4" permanently lubricated & sealed precision ball bearings on pulley shaft

.......more details

41B5348-2

LiftMaster Socket and Hub Kit 8360/8360W

Compatible with LiftMaster® Models 8360/8360W Chain Drive Garage Door Openers

CGH205L5-RH

LiftMaster Gearhead with Brake & Carwash Mod. 2 HP 575V 3P L5 Right Hand

Gearhead style commercial door operators employ lubricated gears for heavy industrial high cycle applications.
GH-style operators include a floor level chain hoist to ease manual operation in an emergency or power outage.
Hoist wheel is easily moved to Right or Left hand side of unit eliminating the need to order right or left hand mounting.
MyQ Technology enables you to securely monitor and control your facility operator with your smartphone tablet or computer. Internet Gateway 828LM required.
Security +2.0 radio receiver safeguards your facility - with every click a new code is sent to the commercial door operator so the door opens only for you.
Timer-To-Close: Conveniently and confidently closes the commercial door automatically after a predetermined amount of time has elapsed for added security and peace of mind.

.......more details

V3564-PER-FOOT

Vinyl Seal 4" Bottom Bead End Grey Sold per Foot

Bead diameter 3/16" - 7/32" +/- tolerance

41151R

Genie Light Kit Wall Mount

Bluetooth Light Assembly for the Genie #6070 & 6170 Wall Mount garage door opener.
Replacement light kit for 39945R

EXT-HDWR-BOX-7/8

Installation Box for Extension Springs for 7' & 8' Doors

Installation Hardware includes 3" sheaves sheave strap cables safety cable fasteners

DC7AH

LiftMaster Battery for MAXUM Integrated BBU DC Units 7AH

For use in Liftmaster MAXUM DC Commercial BBU ops
7 AMP
20 cycles when fully charged

MGH-6234-M-N1-RH

Manaras 1 HP 208V 3P Jackshaft Monitored w/N1 Eyes Right Hand

A very heavy-duty worm gear industrial operator designed for use on Industrial standard high and vertical lift sectional or rolling doors and grilles.
It incorporates a chain hoist for manual operation with a floor level engaging device with electrical cut-out
Electrically activated drum-band type solenoid brake
Full overload protection

K23-11442

LiftMaster Limit Switch SPDT w/Roller and Lever

Same as 23-11442

18205

Wiring Harness 66" long

For use with Rite-Hite dock levelers

31107

Doorlec Sprocket 41B29 5/8" Bore

BEA-10FALCON-EX30

BEA Falcon Motion Detector w/Exp Proof Housing 30ft Cable

FALCON EX combines a microwave activation sensor with an explosion-proof/flame-proof housing
Ideal for use in unique environments such as chemical manufacturing petroleum refining and agriculture.
FALCON EX can be mounted from 11.5' to 23' to fit any industrial application.
Nema4/IP66
Detection Zone: Falcon EX: 13’×16’ at 16’
Operating temperature: -22 to 140F

.......more details

GAREX-PAINT-KAKI

Garex Touch-Up Paint Kaki

110001-BULB-PER-FT

Janus T-Bulb Astragal Black Sold per Foot

Fits Janus mini storage doors M650
Bottom weather seal only no retainer

MSEL

LiftMaster Steel Stand for Mounting to Concerte Pad

Stand height: 7.5 in.
Compatible with SL3000UL

CG-HOIST-DBLE-114

ControlGard Chain Hoist Double Compound 1-1/4" Bore

Cornell Double Compound hoists are designed for larger doors
Features an integral braking system that only moves when the user is actively pulling the chain

BEARING058

Manaras Needle Roller Thrust Bearing 1" ID

1-9/16" OD 5/64" Width
Replaces BEARING025

10MS31U-B

BEA Magic Switch Touchless Stainless Steel Single Gang

BEA’s MAGIC SWITCH® provides a highly accessible and germ-free door activation without physical contact.
Reduce touchpoints in fast-paced environments that depend on sanitation like healthcare retail industrial and commercial settings.
Using microwave technology BEA’s MS31 produces a detection field with a reliable and consistent transmission in interior and exterior applications.
Capable of detecting a moving hand cart or wheelchair.
Operating temperature: -20 to 55C
IP54

.......more details

GDI-HB330

GDI Direct Drive & Jackshaft HAML-RBH-2030 Nema 1 To Accept 1" Shaft Non Monitored

Compact & Light Weight - Fast Installation
Applications Include Car Wash Cold Storage Pharmaceutical Agricultural Food Facility Sectional Grilles and Rolling Steel Doors
Brushless DC High Reliability Hi Efficiency & Low Maintenance Motor
No maintenance GearMotor sealed stainless steel bearings no limit switches no belts or hydraulic cylinders to maintain
One Operator Handles all AC Voltage Applications (115/208/230/460 & 575V)
Soft start soft stop

.......more details

FAAC-844-115V

FAAC 844 Slide Gate Operator 115V

The FAAC Model 844 automated system for sliding gates is an electro-mechanical operator transmitting motion to the sliding leaf via a rack or chain pinion appropriately coupled to the gate
The non-reversing system ensures the gate is mechanically locked when the motor is not operating and therefore no lock needs to be installed
Control Board: model 780D

LEVER001

Manaras Hoist Disconnect Lever

MGH 3-phase up to 1.5hp

PRO-4X_MOD-1PH

Micanan Nema 4X Modification 1/2HP- 1.5HP 1-Phase

This modification provides a washdown motor N-4X corrosion proof stainless steel control box enclosure waterproof drive and limit chain and a corrosion proof three-button station.
For options M & U Micanan N-4X photocells are supplied
1/2HP to 1.5HP Motors

P-831RE

Pulsar 1-Door O/C/S Receiver 318 MHZ P-110554

Allstar compatible
Economy housing receiver
OPEN-CLOSE-STOP
24V AC/DC
8 dipswitches 318 MHz

Wiring-diagram

IHSL24UL

LiftMaster Heavy-Duty Industrial Variable Speed Slide Gate Operator with battery back-up

For Industrial Slide Gates up to 2200 lbs.
Variable cycle speed is adjustable from .5 ft./sec. to 1 ft./sec.
Industrial brushless DC motor with battery back-up
Continuous-duty gate operation built with industrial oil-bath gear box
Enclosure Lockable Weatherproof 14g NEMA 3R Steel Cabinet
Smooth start/stop operation and mid-travel reversal extend operator hardware life.

.......more details

IHSL24UL Installation-manual IHSL24UL Manuel-Installation IHSL24UL Guide-installation IHSL24UL Guide-de-produit

210294

SkyLink Trolley Assembly for Tube Rail

SD751L5-LH

LiftMaster Heavy-Duty Slide Door Operator 3/4HP 115V Left Hand (Must include hardware box)

Perfect for split and sliding doors involved with industrial applications.
It is installed above the door and corresponds with the direction the door will be traveling.
Comes equipped with an emergency disconnect and for manual lifting in an emergency and automatic reconnect.
The new logic 5 commercial operators come with MyQ Technology built in. * 828LM required
Built In Security+ 2.0 radio receiver
Solenoid brake included

.......more details

312964

ODCC Adjusting Wheel 8" OD 1" Bore

RN0037-SS

Roller 3" Black Nylon 7" Stainless Steel Stem Precision Sealed Bearing 6203

A supreme precision sealed bearing roller that never requires lubrication
Ideal for high usage and high moisture areas ie..carwash
7/16" stainless steel shaft.
100 lb load 100000 cycles of a 12' door
Stem Length - 6.69" which does not include the shoulder Overall Length - 7.97"

41014

Doorlec Emergency Release Spring

Attaches to the wall disconnect leverto put the operator in manual mode in case of power failure

202-0022

TNR Composite Bottom Bar Arm for HDXL *** Price by Quote Only

PS-20A

Miller Edge Pneumatic Air Switch in ABS Enclosure

Pneumatic switch offering a reliable low cost alternative to a standard electric sensing adge.
When attached to a hose inserted into the existing weather stripping the PS-20A acts as an effective sensing edge on doors up to 18ft in length.
Applications: rolling doors sectional doors and mass transit.
Electrical configuration: 3-wire SPDT
Temperature range: -20F to 158F
Max pressure: 20 PSI

.......more details

RESET-12A-32V

Doorlec Reset 12A 32V Overload

LRS-LC

EMX Logic Controller

For use with the Loop Replacement System (LRS-C1) Magnetoresistive Vehicle Detector Control Unit
Connects two stand-alone sensors to expand the detection area
Works with LRS-DB (LRS-DB-50 or LRS-DB-100) Direct Burial or LRS-FP Flat Pack (LRS-FP-50 or LRS-FP-100)
Logic Interface allows one (1) or two (2) sensors to be connected to one (1) output
Provides six (6) selectable logic functions and two (2) separate relay outputs
A/B directional logic can be selected with an output for each direction of travel as a vehicle passes over two sensors

.......more details

OSH-6213-CONT-LH

Manaras Opera-SH 3/4 HP 240V 1Ph Contactor Left Hand

An ultra high-end heavy-duty V-belt drive industrial jackshaft operator
For use on Standard High and Vertical Lift sectional doors
Can also be used on Rolling doors and Grilles
Comes with a chain hoist for manual operation and a floor level engaging device
Clearence: side room required 16"
25 cycles per day > 100 cycles per day

.......more details

Installation Manual

87802

LiftMaster Elite Series HD 3/4 HP DC Chain Drive Wi-Fi with BBU

Drive system: Chain drive
Horsepower: ¾ HP Equivalent DC Motor
Voltage: 120V AC 60 Hz
Backup battery included for operation even when the power is out
Soft start/stop for smooth operation
Integrated Wi-Fi and Bluetooth

.......more details

87802 Installation-manual 87802 installation-manuel Receiver Logic Board Conversion List Comparison Chart

19-5816

LiftMaster Trolley Chain Pack #48 for 16ft Door

Chain pack only

MOTOR383

Manaras Electric Motor 2 HP 208/480V 3Ph

Continuous duty C-flange ODP 60Hz

33103

Overload 1.40 to 2.30A

Setting range 1.8-2.5A

041-0041

LiftMaster Camera with Decorative Cover

Fits model 87504

041-0136

LiftMaster Safety Sensor Kit 2021 - Present works with all Liftmaster residential openers 1993+

For use with various LiftMaster® and Chamberlain® Belt Drive and Chain Drive Garage Door Openers featuring myQ® technology and Secure View™ Video Camera
Complete kit includes: Sending sensor (with LED) receiving sensor (with LED) 2-conductor wire (5) wire connectors and replacement hardware which is not compatible with the older style safety sensor kits.
IMPORTANT NOTE: These safety reversing sensors feature new mounting brackets (041-0155-000) and are NOT compatible with the older style safety sensors.
The new safety sensors will work with the older style brackets (41A5266-3).

ATV320U15M2C

Pivin Drapeau Telemecanique Variable Speed Controller 200/240V 1PH 2HP

ALUM-554

Aluminum 24" x 100' Spool Chestnut Brown / Brun Marron # 554

20% thicker than the aluminum sold in retail stores (0.022" )
Gentek # 554
Reverse side is #431 Bright White

Colour chart

410-0003

Gateway Weather-Stripping 1-3/8" Gray For Roll-Up Door Tracks Sold per Foot

GAREX-PVC-W-12

Residential Side & Top PVC Weather-Strip with cap 12' Long (145") - White

White rigid retainer with white flexible vinyl.
Dual fin vinyl.
Comes with snap-on cap to hide screws.

041-0042

LiftMaster Wiring Harness Camera

Replacement wiring harness kit compatible with 85503 & 85503-267

H3NA12

Richards-Wilcox Hinge 3NA x 12 Gauge Roller Bracket

Galvanized 12 gauge hinge

236514

Wayne Dalton Res. Bottom Bracket Roller Holder RH

Compatible with Wayne Dalton 9100 9400 9600 9800 Foamcore II garage door models.
Pins & Cotters Included
Top quality galvanized steel
Dimensions: 4" Wide x 1.25" High x 1" side flange with milford pin
Sold as a single unit

380UT

LiftMaster Universal 2-btn Transmitter Gen 5

The Universal Remote Control is compatible with most major brands of garage door openers gate operators and commercial door operators
Operates up to two brands of garage door openers eliminating the need of multiple remotes on your vehicle visor.
Universal compatibility allows you to operate two different garage door manufacturers and/or frequencies at the same time
Security+ 2.0®
Compatible with: LiftMaster® Chamberlain® Craftsman® 390MHz 315MHz 310MHz Security+2.0 390 MHz Security+ Rolling Code 315 MHz Security+ Rolling Code 390 MHz Billion Code 390 MHz Dip Switch (7 8 and 9 position)
Genie® 390 MHz Rolling Code (Intellicode) 315 MHz Rolling Code(Intellicode) 390 MHz Dip Switch (9 and 12 position)

.......more details

380UT Manual (EN/FR)

MA020T

LiftMaster Mega Arm Tower Replacement Cover

Mega Arm Tower Cover.
Compatible with LiftMaster® Barrier Gate Perimeter Access Systems Operators.

DS50

Light Commercial Non-Insulated Rollup Sheet Counter Door

Max Width: 12’
Max Height: 6’
26-gauge galvanized steel
Manual lift operation
Slide bolt or curtain lock

ME123-2M-BLK-U

Miller Edge Black Universal 2 -Wire Monitored 2" wide x 1-1/2" high Sold by the Foot

Electromechanical slide in edge for sectional doors and sliding gates.
Touch sensitive singaling allows for immediate stopping and reversing of motion
Temperature range: -30F to 155F
Lead wire: 22 gauge universal
Sensitivity: nominal 6-8 PSI
2 wire NO configuration

.......more details

Worksheet Installation manual Sell sheet

85503

LiftMaster Belt Drive DC Battery Backup Wi-Fi W/Camera

Integrated Camera. Camera manually adjust 360 degrees to see everything that happens in the garage
HD-Quality Video. Glare-resistant night vision lens auto-adjusts to light levels in the garage to capture everything and anything that passes through the garage
Live Streaming and Video Storage. View a live-stream of your garage for free. 7-day and 30-day video storage options are available via a monthly subscription.
2-Way Audio. Communicate in real time between your garage and your smartphone
MyQ Technology now with Wi-Fi® enables secure monitoring and control of your garage door opener with a smartphone tablet or laptop.
DC Motor Belt System delivers powerful ultra-quiet performance.

.......more details

Receiver Logic Board Conversion List

SPP2905-TC

Telco SpacePak Diffused Proximity Photoelectric Sensor with 5m Cable

Multi-voltage diffuse proximity photoelectric sensor with a detection range of 5 meters without the need for a reflector.
Operation mode and max sensing range: Diffuse proximity: 0-5 m
Compact rectangular housing (50 x 50 mm x 17mm)
Power output and signal level indicators

User manual Manuel d'utilisateur Spec sheet

41A2818

LiftMaster Limit Switch Drive Gear Kit

For use with various LiftMaster® and Chamberlain® Residential Garage Door Openers.
Complete replacement kit includes: helical gear e-clip and grease tube

K75-10214

LiftMaster Straight Door Arm Kit

For use with various LiftMaster® Commercial Door Operators.
Complete kit includes: straight arm emergency rope with handle and warning label
Also known as: 41K3681 7510214 453405 75-10214 305105003 1C3681 1C3428

RESET005

Manaras Resettable Overload Fuse 8A 1 Phase

50324

Doorlec Drive Shaft Kit ETB-3

SPBAR001

NICE Bar Support Kit MBAR5

74183

Marantec External Gate Receiver 315 MHz

Upgrade your existing gate operator to be compatible with Marantec controls such as transmitters and keyless entry systems.
315 MHz operating frequency
HomeLink compatible
Very easy installation (follow wiring diagram of gate operator)
Compatible with other operator brands
Made in Germany

.......more details

OVIEW-IBT4

NICE Handheld Oview Display Programmer with IBT4 Interface Module OVIEW/A

Required for programming barrier gates

MC22-2WIRE-LH-G

Miller Edge MC22 2-Wire Non-Monitored Left Hand Gray Includes Funny Flaps - Sold per Foot

��Electromechanical sensing edge for use on Cornell doors. •The MC22 is manufactured to exact specifications. •The MC22 is completely flexible and will contour to curved surfaces. •Touch sensitive signaling allows immediate reversing or stopping of motion. •Temperature range: -30F to 155F •Lead wire: 22 gauge universal •Sensitivity: nominal 6-8 PSI •2 wire NO configuration •Vertical or horizontal mount •One year warranty

Worksheet

WHTG-TEMPGUARD

Whiting Special Order TempGuard Door **POR

Special order to customer's specs
1-1/2” fiberglass panels are clad with aluminum exterior facing for easy cleaning and excellent acceptance of paint and decals.
No rivets on face of door to interfere with lettering or decals.
One piece pultruded fiberglass shell featuring foam-in-place urethane insulation.
All hinge fasteners reinforced with steel backing plates.
Replaceable double seal at each panel joint.

.......more details

A123300SGLPK

LiftMaster Battery w/ Harness Single 33AH 12V

10.1054.1

Truck Door Pop Rivet 1/4" ColdSaver/TempGuard Doors

Mild steel construction
Used in Cold Saver and Temp Guard doors

IRB-SH-SET

EMX Industries Steel Protective Hoods Only Grey Powder Coat Pair

Includes 2 hoods
Powder-coated steel construction
Compatible with EMX IRB-MON EMX IRB-4X safety photo beam sensors
Each hood fits easily over gate/garage door opener sensor

C-24X12-134-LEXBLK

Thermal Window 24" x 12" for 1-3/4" Door Lexan Black

For 1-3/4" thick door
Glass type: Polycarbonate (Lexan)

E/BLOP/149

Automatic Systems Safety Edge for BL229 13'

Z9003-QUIET

Pusher Spring - 27" w/Sleeve 3" Tip Sold as a Pair

Quiet pusher spring 27" long with a large 3" tip and PVC sleeve over tube
11lbs of initial pushing strength per spring+ 3lbs per inch per spring
Sold as a pair. Pair includes 1 LH 226841 and 1 RH 226842

MF00003

Micanan R.H. Phillips Machine Screw 4-40 UNCx1-1/2

crew to hold double limits

17350

Doorlec Cable 5ft with Antenna

PL-A23-RPM-BRKT

Lynx RPM Reader Board Bracket Only

RP-MTR-AO-RSL-12

Lynx Electric Motor AO RSL 1/2 hp 120V ** NLA

For residential opener MRE

BEA-LZR-I30

BEA Laser Scanner for Ind. Automation Time of Flight Sensor Nema 4

The product configuration provides four laser-based curtains offering a three dimensional safety zone each capable of 360 in x 360 in (30 ft x 30 ft)
Designed for the detection of people and vehicles in both indoor and outdoor environments
The detection accuracy makes this sensor ideal for high performance industrial doors vehicle flow safety perimeter protection and a variety of applications. Detects objects as small as 2 inches at 30 feet away
IP65
Operating temperature: -22 to 140F
Three visible LED spots provide accurate reference points when adjusting the tilt angle.

.......more details

Installation manual Sell sheet

Q076

LiftMaster Turn Buckle Kit K75-50132

For Liftmaster trolley operator HCT

OPH-6212-ECB-LH

Manaras Opera-H 1/2HP 240V 1Ph with Electronic Circuit Board Left Hand

A heavy-duty industrial jackshaft operator.
For use on Standard High and Vertical Lift sectional doors.
Can also be used on Rolling doors or Grilles.
Comes with a self-engaging chain hoist for manual operation.
Clearence: side room required 15"
25 cycles per hour 100 cycles per day

.......more details

7001-14-ANODIZED

Commercial Side & Top Weather-Strip 14' Long - Anodized 7001-AB

Anodized galvanized steel with black dual fin vinyl.
Commercial and Residential use.
Steel is notched on both ends for easier installation.

CP100C

Coupler Specialty Coated 1" Bore

Coated with 1000 plus hr salt spray rated finish
1" Bore with 1/4" keyway
Malleable iron for high strength and resistance to shock loading
Coupler halves separates and is adjustable
4-(3/8"-16 x 1" square head set screws installed
Rust inhibitor coating

.......more details

ERM40600H00

NICE Era MH Tubular Motor 40Nm 14rpm 120/60 12'

There must be at least 0.4 m between the driven parts and any xed elements
If the cable is damaged the appliance must be scrapped. The power cable cannot be replaced

230404

Linear Motor Control Board 5 Relay (w/Brake)

For commercial door operator

RBH105L5-RH

LiftMaster 1 HP 575 VAC 3 PH Comm. Hoist Op. Logic 5 Right Hand

H-style operators include a floor level chain hoist to ease manual operation in an emergency or power outage.
The operators are typically mounted to the wall when used with larger sectional overhead doors with vertical or high lift and mounted to the wall or the front of the hood when used with rolling doors and grilles.
H operators are attached to the door jackshaft to indirectly drive the door.
With the addition of the 828LM MyQ technology enables the user to monitor and control their operator and light with their smartphone tablet or computer.
Alerts can be received as email or pop-up (push) notifications on a mobile device ensuring the status of your commercial door.
Security+ 2.0™ safeguards your facility – with every click a new code is sent to the commercial door operator so the door opens only for you.

.......more details

RBH105L5-LH

LiftMaster 1 HP 575 VAC 3 PH Comm. Hoist Op. Logic 5 Left Hand

H-style operators include a floor level chain hoist to ease manual operation in an emergency or power outage.
The operators are typically mounted to the wall when used with larger sectional overhead doors with vertical or high lift and mounted to the wall or the front of the hood when used with rolling doors and grilles.
H operators are attached to the door jackshaft to indirectly drive the door.
With the addition of the 828LM MyQ technology enables the user to monitor and control their operator and light with their smartphone tablet or computer.
Alerts can be received as email or pop-up (push) notifications on a mobile device ensuring the status of your commercial door.
Security+ 2.0™ safeguards your facility – with every click a new code is sent to the commercial door operator so the door opens only for you.

.......more details