Devanco Canada - Get The Right Garage Door Opener‎ and Parts

GBUP312EF-1

Gate Roller 3-1/2" x 2-3/8" Polymer Sold Individually

Polymer gate roller with bracket for 3-1/2" upright post
Works with gate pipes that are 2-3/8" thick or less

2510-273

Linear 230-Volt Heater for Gate Op

19-48055MB

LiftMaster Limit Chain Assembly #48 x 55

Fits the SL575 & SL585GL gate operators
Same as K19-48055MB

GBU312EF-1

Gate Roller 3-1/2" x 2-3/8" Galvanized Sold Individually

Galvanized gate roller with bracket for 3-1/2" upright post
Works with gate pipes that are 2-3/8" thick or less

SPRING-GALV-144

Torsion Spring Galvanized Wire Full Length Custom Order

Custom galvanized wire spring ordered to suit

RADIO-EM144

Manaras 144-Door Transmitter O/C/S 390 MHz

3-button O/C/S transmitter for144 Doors
LED Indicator Nema 1 Enclosure
Soft touch push buttons including a bright red stop button for easy identification
Compatible with Manaras Opera Rolling Code Series "100" Transmitters and receivers
Compatible with Manaras Operators equipped with Board 70 or external receiver Radio-RE901 and Radio-Kit004 & Radio-Kit005
Wall or Post mount

.......more details

Sell sheet

E/BLOP/151

Automatic Systems Safety Edge for BL229 16'-5"

MD00077

Roller Chain #40 Sold by the Foot

60-2828

Industrial AB Thru-Beam Infrared Sensor Nema4

Infrared Sensor
NEMA 4 Hooded Metal Enclosures
Distance: 200 Feet
12 - 24 VAC/DC
UL 325 Compliant

E/1929/071

Automatic Systems Round Arm Ass'y 16'-5" (BL229)

Used on the BL229 gate op.

MGH-6113-ECB-LH

Manaras 3/4 HP 120V 1P Jackshaft with Elect. Circuit Board Left Hand

A very heavy-duty worm gear industrial operator designed for use on Industrial standard high and vertical lift sectional or rolling doors and grilles.
It incorporates a chain hoist for manual operation with a floor level engaging device with electrical cut-out
Electrically activated drum-band type solenoid brake
Full overload protection

30004

Doorlec Brake Solenoid 460V with wire leads

WLMODULE002

Manaras Univ. Aux Output Module BOARD070

22010

Doorlec 1-22mm Cylinder Complete with Normally Open Contact Spring Return Includes 2 keys

22010-UNCUT-KEY

Doorlec Un-Cut Key for 22010 Sold Each

2100-564

Linear Clutch Disk Facing HSL HSLG

CAMPLATE001

Manaras Cam Plate GH Standard

AW-10

Miller Edge Air Wave Switch Only No Enclosure

Air pressure is lead via a hose or pipe to a diaphragm contact. This contact converts the positive or negative pressure into an electrical contact and pulse.
Applications: commercial sectional doors rolling doors and mass transit
Works on doors up to 60ft
Can be used with standard pneumatic hose and Miller Edge extrusion
Sensitivity: 2mm to 500mm
Ambient temperature range: -49F to 180F

.......more details

Instruction manual Sell sheet

E/BLOP/005

Automatic Systems Standard Tip Support Option

MA041

LiftMaster Mega Arm Tower Lock & Keys (No Dust Cover)

Comes with two keys

2510-527

Linear Motor Drive Inverter Assy 2HP 230V 3P

For model VS-GSLG-723

RADIO-RE901A

Manaras 1-Channel 24V Dip-Switch (313MHz) & Rolling Code (390MHz) Receiver with Commercial Antenna

For Commercial/Industrial Garage Door Applications
Wall Mount
DIP Switch and Rolling Code Technology
Sixteen (16) Fixed Codes / Receiver
313 MHz & 390MHz Radio Frequency
Controls One (1) Door

.......more details

Programming instructions

328-729

Lip Shock Absorber Dock Leveler

REDUCER030

Manaras Reducer CC63-40D Frame 56

HAE00012

Linear Motor Cover LDO50

Replacement motor cover only

SF375-W

Spring Fitting 3-3/4" Winding Side Only

Universal thread for use in either LH or RH wound springs.
Maximum wire size diameter: .4062".
Set screw installed: 3/8"-16 x 1-1/2" (2).
Mounting: 1" tube or solid shaft - min. 1/2 turns on the set screws.
Winding bar hole 5/8"

STRUT-2-1/4-16'

Door Strut 2-1/4" Hemmed 16ft Long

Reinforcement bar 2-1/4"

OSH-6813-ECB-LH

Manaras Opera-SH 3/4 HP 208V 1Ph with Electronic Circuit Board Left hand

An ultra high-end heavy-duty V-belt drive industrial jackshaft operator
For use on Standard High and Vertical Lift sectional doors
Can also be used on Rolling doors and Grilles
Comes with a chain hoist for manual operation and a floor level engaging device
Clearence: side room required 16"
25 cycles per day > 100 cycles per day

.......more details

OSH-6813-ECB

Manaras Opera-SH 3/4 HP 208V 1Ph with Electronic Circuit Board

An ultra high-end heavy-duty V-belt drive industrial jackshaft operator
For use on Standard High and Vertical Lift sectional doors
Can also be used on Rolling doors and Grilles
Comes with a chain hoist for manual operation and a floor level engaging device
Clearence: side room required 16"
25 cycles per day > 100 cycles per day

.......more details

GAL.262-258-144L

delete

MOD130

Manaras Cogged V-Belt Upgrade

The standard v-belt is replaced by a cogged v-belt for added durability
Applies to: OSH OTH OTH-A.00 OTBH OTBH-A.00
This is available only as an upgrade with the purchase of a commercial op.

112561

Allstar MVP-RE 24V 8 Wire Receiver 288 MHz *** NLA

Three channels – three relay outputs
8-wire operator connection
Wire whip antenna with “F” connector
Compatible with Allstar Classic Allister and Pulsar dipswitch transmitters and MVP quik-code transmitters
Power: 24 VAC/VDC
Codes: 19683

.......more details

10-10191-GR

LiftMaster Brake Disc

For various Liftmaster commercial slide door operators
Also known as: 10-10191-GR 10-10191-GR 1010191 G105209 10-10191 105209

GAL.262-258-144R

delete

VMD202-R

EMX Remote Tuning and Adjustment Control Device

If you wish to “tune” the sensitivity the accessory VMD202-R will need to be plugged temporarily into the connector.
The VMD202-R may then be removed or left in place as desired.

41D3058

LiftMaster Electric Motor and Bracket Kit

Complete kit includes: Motor and bracket assembly sprocket RPM sensor grease and bearings
Also known as: 41D3058 41A2821 41A2820 41A3058

VMD202-50

EMX Vehicle Motion Detector Probe with 50ft Lead Wire

The VMD202 Vehicle Motion Detector is the most advanced single-piece vehicle motion sensor on the market today.
The probe and its electronics are housed in a slim design that is buried next to a driveway.
The VMD202-R Sensitivity Remote Control (sold separately) makes installation and fine tuning simple
Probe assembly and wire are water tight and direct burial compatible
Harness is pre-wired onto lead wire for easy installation
Settings are placed in a non-volatile memory in case of power failure

.......more details

LZE500

Erone L & Z-Bracket for Maglock ESM500

T-831

FL-Allstar Stationary TransmitterO/C/S 3-Btn 1-Door 311 MHz 107483

Open/Close/Stop stationary remote for 1 door.
Designed for commercial automatic door and gate operator applications.
This transmitter can operate a single receiver connected to one operator
Compatible with 3-channel Allstar and MVP receivers
Easy access to battery and coding switch
Power: 9-volt battery

.......more details

G-21X13-134-BLK

Thermal Window Clear 21" x 13" for 1-3/4" Garaga Door Black

For 1-3/4" thick door

CAP378

Capacitor 110/125VAC 378-454MFD

378-454 mF 125 VAC 50/60 Hz
Used on 1/2 HP LiftMaster operators

SPRING001

Manaras Cam Guide Plate Spring

2110-823

Linear Idler Assy Wheel with Bolt for 1/2hp SL Gate Op.

SPR41B44-1

Sprocket 41B44-1" shaft

111396.0004

Overhead Brake Kit Model H 1/2HP 1PH

Installation instructions

ESM500

Erone 1200lbs Exterior Maglock Surface Mount Stainless

Exterior applications & High-traffic areas
Power requirements: 12/24VDC
Current Draw: 500mA @ 12VDC 250mA @ 24VDC
Monitoring sensor
Visual feedback (red & green)
Optional L/Z bracket sold separately: LZE500

.......more details

Installation manual

MGH-6435-ECB-RH

Manaras 1.5 HP 480V 3P Jackshaft with Elect. Circuit Board Right Hand

A very heavy-duty worm gear industrial operator designed for use on Industrial standard high and vertical lift sectional or rolling doors and grilles.
It incorporates a chain hoist for manual operation with a floor level engaging device with electrical cut-out
Electrically activated drum-band type solenoid brake
Full overload protection

MGH-6435-ECB-LH

Manaras 1.5 HP 480V 3P Jackshaft with Elect. Circuit Board Left Hand

A very heavy-duty worm gear industrial operator designed for use on Industrial standard high and vertical lift sectional or rolling doors and grilles.
It incorporates a chain hoist for manual operation with a floor level engaging device with electrical cut-out
Electrically activated drum-band type solenoid brake
Full overload protection

RBH505L5-RH

LiftMaster 1/2 HP 575 VAC 3 PH Commercial Hoist Operator Logic 5 Right Hand

H-style operators include a floor level chain hoist to ease manual operation in an emergency or power outage.
The operators are typically mounted to the wall when used with larger sectional overhead doors with vertical or high lift and mounted to the wall or the front of the hood when used with rolling doors and grilles.
H operators are attached to the door jackshaft to indirectly drive the door.
With the addition of the 828LM MyQ technology enables the user to monitor and control their operator and light with their smartphone tablet or computer.
Alerts can be received as email or pop-up (push) notifications on a mobile device ensuring the status of your commercial door.
Security+ 2.0™ safeguards your facility – with every click a new code is sent to the commercial door operator so the door opens only for you.

.......more details

26124

Doorlec Clutch Shaft 12-5/8" x 5/8" LJH

Previous shaft size was 11-3/4" but have now been replaced by 12-5/8" to accomodate larger box size

SABLOP/12X

Automatic Systems Red LED Lighting Module for Arm

7M-NICE-BAR-ASBY

NICE Replacement Bar Assembly for M7BAR Barrier Gate

Bar assembly comes with:
(1)XBA15 -- 3M BAR
(1)XBA14 -- 4M BAR
(1)XBA9 -- EXPANSION JOINT FOR CONNECTING BARS
(2)XBA13 -- RUBBER IMPACT PROTECTION STRIP
(2) WA10 -- RED ADHESIVE REFLECTIVE STRIPS

.......more details

NICE-OVIEW

NICE Oview Display Programmer

�
Type: control programming and diagnostics unit for devices equipped with BusT4 connector
Technology adopted: half duplex 19200 Bps serial connection on differential bus for delivery of commands modification or parameters and monitoring of diagnostic data
Maximum number of hourly commands: 64
Event log: storage capacity of 400 events
Operating temperature: from –20°C to +55°C • Dimensions (mm): 107 x 61 x h 20 (with wall-mounting support: 125 x 70 x h 32)

.......more details

CP-BRK-CAM-MCJ

Lynx Retaining Plate & Hardware for MCJH

36045A

Genie Helical Gear 2040L

Helical gear assembly for the Genie #2040L garage door opener.
Same as: 36045AS 36045. 36045A 36045S
Includes: Helical and limit gear screws clips and small tube of grease.

K10-10166

LiftMaster Clutch Plate

Also known as: 1010166 10-10166 142A122 AB112-00230 1090371 142C131 10-9037-1 G1090371 0890371 G1010166 112-00230

41A7618

LiftMaster End Panel with Battery Cover and Light Socket 8550W

LMRRUL

LiftMaster Monitored Retro Reflective Photo Eye w/Heater 2018 UL325

Features integrated diagnostics with our 2018 UL® 325 Gate Operators.
Versatile Solution for entrapment protection.
Long-Range Sensing Distance of up to 50 ft. (LMRRUL)
Built-In Heater for dependable performance in most environments.
Increased Beam Angle for simple reliable alignment.
Versatile Gimble Bracket for fine alignment and adjustability.

.......more details

Installation manual Manuel d'installation Sell sheet

2806.162.18

Whiting .162 x 2-3/16 x 18" Roadside with Cones

2807.162.180

Whiting .162 x 2-3/16 x 18" Curbside with Cones

.192-2-R

Cut-to-Length Torsion Spring .192 x 2" Right Hand Wound Silver

Priced per inch - cones sold seperately
For factory installed cones use part no. C-200-INSTALLED

.192-2-L

Cut-to-Length Torsion Spring .192 x 2" Left Hand Wound Silver

Priced per inch - cones sold seperately
For factory installed cones use part no. C-200-INSTALLED

BEARING006

Manaras Flange Sealed Bearing 5/8"

Flange sealed bearing for 5/8" shaft

2376.177*26.960

Whiting Torsion assembly .177 wire size 26" spring length 96" shaft

S505AL

LiftMaster Monitored Small Profile Resistive Edge w/Aluminum Channel 5ft

Meets 2016 UL 325 requirements Edge sends signal to stop and/or reverse operation when sensing obstructions
Fast easy to install mounts vertically or horizontally
Compatible with Wireless edge kit LMWEKITU Transmitter LMWETXU and LiftMaster Gate Operators with Monitored Safety Inputs

Installation manual

M15A

Safety Inertia Brake 2" Bore 13727 Torque PCM15AP

Provides a bearing to support the shaft and prevent the fall of a door if sudden acceleration occurs.
Ideal for commercial and industrial use; specifically with rolling shutters and balanced and well maintained rolling doors.
Fully resettable and reusable after lockout ocurrs.
Commonly paired with commercial safety bottom brackets in sectional door applications.
Fits 2" shaft
Note: Sectional torsion door systems must be well maintained to ensure desired inertia brake activation.

.......more details

Reference manual Technical data Sell sheet

SELECTOR-8L5

Devanco replacement rotating 8 position switch selector for 8L5-OCS

replacement rotating encoded 8 position selector for 8L5-OCS

SELECTOR-BTN-8L5

Devanco replacement rotating black button for 8L5-OCS

replacement black button but for rotating 8 position selector for 8L5-OCS

P-75

End Plug for 3/4" ID Rubber Hose

Sold per plug

P-75H

End Plug for 3/4" ID Rubber Air Hose w/ Center Hole Qty 1

Sold per plug

RAH-750-100

Pure Gum Rubber Air Hose 3/4" ID 1/8" Wall Beige 100ft

218-45-10

PVC Connector for 3/4" - 3/32" RAH

CP-SH-58-1012

Lynx Center Shaft Only for MCJH 5/8" x 10-1/2"

30005

Doorlec Brake Solenoid 208V with wire leads

BTN-8L5-RD

Devanco red replacement button for 8L5-OCS

red replacement button for 8L5-OCS

BTN-8L5-GR

Devanco green replacement button for 8L5-OCS

green replacement button for 8L5-OCS

MX00128

Micanan Clutch Assembly for PRO-GOHD

XBA15

NICE Aluminum Bar with 3M White Paint 69mm x 92mm x 3150mm

WA10

NICE Red Adhesive Reflector Strips 24pcs/Pkg

SPGAP06400A

NICE Replacement Nylon Insert Kit

K72-33889

LiftMaster Clutch Shaft Kit

Clutch Shaft Kit for MJ Jackshaft Operators
Complete with: Clutch Plate Clutch Shaft Bearing Sprocket 5L Belt Motor Pulley Spring Clutch Disk Shim Washers Castle Nut Flatwashers Cotter Pin Roll Pins and Push on Fastener
Same as 308117101K 310115111 K7212589 K72-12589 71116121J

30001

Doorlec Brake Solenoid 575V with wire leads

120BH

12" Heavy Brush Insert 6ft Long

Polypropylene bristles

1004-2-14'

Aluminum Bottom Retainer 2" U-Shape with Reinforcement 14 ft***Actual Length 14'2"***

For door thickness 2"

PTRR5-C

Telco Light Curtain Fastening Clips 3 pcs/Bag

JA383

FAAC Sprint 383 Board 115V

12576

Doorlec Clutch Disc Fiber 4" dia.x 1" bore

Fits model ETBHW/ETHW

2376.192.29.910

Whiting Torsion assembly .192 wire size 29" spring length 91" shaft

This is a full balancer assembly

UTIL025

Utility Limit Switch Telemecanique

VS-GSLG-723

Linear Industrial Duty Variable Speed Slide Gate Op. 2 HP 230V 3 PH

Up to 24" per second gate speed
Max gate length: 100 ft
Max gate weight: 4000 lbs
Integral APeX Controller
Soft start/soft stop
Programmable speed control

.......more details

Installation manual Spec sheet

CGH203L5-RH

LiftMaster Gearhead with Brake & Carwash Mod. 2 HP 208/230/460V 3P L5 Right Hand

Gearhead style commercial door operators employ lubricated gears for heavy industrial high cycle applications.
GH-style operators include a floor level chain hoist to ease manual operation in an emergency or power outage.
Hoist wheel is easily moved to Right or Left hand side of unit eliminating the need to order right or left hand mounting.
MyQ Technology enables you to securely monitor and control your facility operator with your smartphone tablet or computer. Internet Gateway 828LM required.
Security +2.0 radio receiver safeguards your facility - with every click a new code is sent to the commercial door operator so the door opens only for you.
Timer-To-Close: Conveniently and confidently closes the commercial door automatically after a predetermined amount of time has elapsed for added security and peace of mind.

.......more details

DHJ501L5-RH

LiftMaster Ind. Duty Hoist/Jackshaft Op. 1/2 HP 115/230 VAC Logic 5 Right Hand***Discontinued

Industrial-Duty Hoist/Jackshaft Operator with Internal Door Lock Sensor
Optimal for shopping mall applications with heavier rolling doors and grilles.
Provides a floor level chain hoist to ease manual operation in an emergency or power outage.
Includes a door lock sensor to prevent damage to the door and operator caused by attempts to automatically open a locked door.
Industrial Ball Bearings on 1" Output Shaft
Second Floor-Level Disconnect for Manual Lifting in an Emergency

.......more details

144B18

LiftMaster Idler Pulley 2" OD 1/2" Bore

144B0018 is a idler pulley (2"OD 1/2"B) replacement kit. Compatible with Models ATS211 & ATS211R garage door openers. Check the manual for your specific model number before ordering.
Also known as: 144B0018 144B18

31355

Doorlec Sprocket 80B14

DHJ501L5-LH

LiftMaster Ind. Duty Hoist/Jackshaft Op. 1/2 HP 115/230 VAC Logic 5 Left Hand***Discontinued

Industrial-Duty Hoist/Jackshaft Operator with Internal Door Lock Sensor
Optimal for shopping mall applications with heavier rolling doors and grilles.
Provides a floor level chain hoist to ease manual operation in an emergency or power outage.
Includes a door lock sensor to prevent damage to the door and operator caused by attempts to automatically open a locked door.
Industrial Ball Bearings on 1" Output Shaft
Second Floor-Level Disconnect for Manual Lifting in an Emergency

.......more details