Devanco Canada

 
User Name:
Password:
Remember Me:
Forgot your password
Request a Login
Home
.306-258-R

Cut-to-Length Torsion Spring .306 x 2-5/8" Right Hand Wound Red

  • Priced per inch
  • For factory installed cones priced seperately - use part no. C-258-INSTALLED
41B0873

LiftMaster Safety Sensor Sunblocker Kit Works With 41A5034 and 041-0136

  • This complete kit is used to shield sunlight and prevent accidental reversal of garage door from sunlight shinning directly into the safety sensors
  • Works with 41A5034
  • Same as: 041B0873 41B873
G1T-BX

Genie 1-btn Dual Frequency Transmitter -38501R

  • Auto Seek Dual Frequency 390/315 MHz
  • For Intellicode products only
  • 1-Button Remote Control with Intellicode.
  • Compatible with all Genie openers produced since 1995.
Programming instructions
OCDFX4

Overhead Door 4-Btn Transmitter 315/390 Mhz

  • Dual Frequency transmitter that will work on all OHD/Genie brand 315 or 390 rolling code commercial openers including the the RX OHD commercial opener.
  • Part Number: OCDFX4.S GIDFX4.S
ALUM-538

Aluminum 24" x 100' Spool Wicker / Cafe # 538

  • 20% thicker than the aluminum sold in retail stores (0.022" )
  • Gentek # 538
  • Reverse side is #431 Bright White
Colour chart
886LMW

LiftMaster Motion-Detecting Control Panel Sec+ 2.0 Wi-Fi

  • Push button for garage door operation
  • Motion-detector automatically turns on the light when movement is detected
  • 150 degree sensing angle for motion sensor
  • Program remote controls and set up Wi-Fi directly from the control panel
  • Light run-time is 4 1/2 minutes with adjustable light timer option
  • On/Off switch for deactivation of motion-detecting function
    • .......more details
MR00006

Micanan Hand Chain Sold by the Foot

  • DOOR HEIGHT X 2 LESS 4 FT
K72-12509

LiftMaster Output Shaft Kit (3/4 & 1 HP)

  • For commercial operator model T
  • Complete with: Output Shaft Bearing Roller Chain with Master Link Limit Chain Shim Washers Roll Pins Push Ring 3/4' and Sprockets (41B32 & 48B10)
60-5441

Standard LED Dock Light 40" Yellow DL40-PLED

  • Use 80% less energy than incandescent or halogen bulbs
  • LED bulb included
LVB420-11SF

Steel-Faced Laminated Bumper Black 4" Projection Vertical Installation 20" x 11" Sold Individually

  • Used on docks where excessive friction from up and down trailer movement occurs (yard jockeys air ride trailers etc.).
  • Can be used in material handling application where medium to heavy dock protection is required.
  • 5/8" anchor bolts mounted through pre-drilled holes into dock or can be welded to curb angle.
  • Steel face is 3/8" thick heavy duty high carbon steel that is mounted over a laminated dock bumper.
  • Plate to be welded to 2 or 3 steel support brackets which are to extend back to the 3/4" supporting rods.
  • Brackets to be punched with elongated holes to allow steel face to "float" upon impact.
    • .......more details
5001-14-DK-BROWN

Residential Side & Top Weather-Strip 14' Long Commercial Brown

  • PVC wrapped
  • Painted aluminum retainer
  • Dual fin vinyl
SPECIAL-ORDR-US

Special Order Item USA

  • Ordered to customer's specs
ANT-1A

Linear 7-inch Rubber Duck Mid-Range Antenna *** To Extent of Inventory

  • Antenna for Linear’s 27 MHz mid-range transmitters and receivers
  • Seven-inch ”rubber duck” style
  • Supplied with CON-180A straight antenna connector
  • Order CON-90A connector for right angle antenna mounting
  • Dimensions .65” W x 7” H x .65” D
  • Same as: SNE00031
    • .......more details
15-41B14LGH

Sprocket 14 Teeth 1" Bore 1/4" Keyway

  • Same as 15-41B14LGF
MH00109

Micanan Flanged Snap Ring 3/4" ID Precision Bearing

MK00707

Micanan Varistor Harness 110V with Black Wires

37408-PREWIRED

Doorlec Reversing Contactor BF9 120VAC Prewired for Single Phase

CP-MO-34-1231WP

Lynx Electric Motor Base Mount 3/4 HP 110V 1 Ph TEFC

  • Electric motor only
CHAIN036

Manaras Jackshaft Drive Chain #60 - 1R10'

  • Includes 1 chain link
PRO-H-5011E-LH

Micanan 1/2HP 115V 1P Hoist Operator NM ECB No Eyes Left Hand

  • Continuous duty belt drive jackshaft operator with emergency chain hoist
  • Full function Smart 10.0 Logic control board featuring on-board receiver with antenna
  • Solenoid brake OPTIONAL
  • Non-monitored board NO photoeyes
  • On-Board receiver holds up to 20 transmitters
Installation manualSpecification sheet
WHITING-PANEL

Whiting Special Order Replacement Panel Only Price by Quote Only

  • Special order to customer's specs
T-931-MH

FL-Heddolf 1-btn Mini Transmitter P219-1K-311 MHz (New # T-931-MS)

  • Keystone-Heddolf miniature 1 button transmitter 311mhz
  • 12 volt battery and keychain included
  • (9) 3-position dip switch format
  • Compatible with Keystone T-931-H and Allstar T-931 and T-931-M
  • Also known as FIR311DEK31K
Programming instructions
K1D8389-1CC

LiftMaster Main Board DC Pad Mount for UL325

  • This replacement board is compatible with the following models: CSW24U CSL24U RSW12U and RSL12U
  • Also compatible with HCTDCU and HCTDCUL Overhead Gate Operator
  • Same as 001D9039-1CC
Q088

LiftMaster Arm Assembly HCT K75-50146

  • Same as K75-50146
28-01114

Truck Door 1" Std Vert. Track and Angle Assbly J Style Curbside (RH) 120" Todco Style

  • For Todco style doors
  • Galvanized steel 14-gauge construction
  • Includes J-style channel mounting angle with track and operator bracket
  • Fits door sizes 101 - 114" high
  • Cross ref: T #49014-2 T #41034-2 & W #4045
K1D6761-1CC

LiftMaster Logic Board AC

DM11VL-T/FORCE

Cable Drum Vertical Lift 11' D850-132 Pair Torque Force

  • 11' Vertical Lift aluminum die cast alloy.
  • 3/8"-16 x2" hardened cup point set screws installed with red heads.
  • Color coded: Red=LH and Black=RH. Pair includes (1) LH and (1) RH. Max. Door Height: 11'-1".
  • Rated Lift per Drum: 425 lbs.
  • Max. Cable Diameter: 3/16".
  • Mounting: 1" solid shaft with 1/4" keyway.
    • .......more details
MCJH-12-115-ECB

Lynx MCJH Heavy-Duty Jackshaft 1/2 HP 115V with ECB UL325 ** Replaced by CDJH

  • New LX100 circuit board.
  • Built-in 3-channel 372 Mhz radio receiver accepts up to 20 remotes
  • 4L V-belt primary reduction #41 drive chain and sprockets.
  • Adjustable friction clutch magnetic solenoid brake.
  • Fully driven adjustable limit switches.
  • Heavy duty 3 button wall station (Open Close Stop).
    • .......more details
CP-BRC-12

Lynx Resettable Circuit Breaker 12 AMP

  • Used on MCJH 3/4 hp 120V operators
M-18

Molded Rubber Bumper Black 18" L x 10" W 4" Projection 2-Hole Sold Individually

  • Manufactured from reinforced prime rubber
  • Rectangular horizontal mount
  • 4-1/2" depth
  • Ideal for light traffic loading docks.
  • Molded bumpers are molded in one piece and will not warp rust rot or harden.
  • Perfect protection for in-plant wall protection from forklifts and other material handling vehicles. and will not warp rust rot or harden.
    • .......more details
LB412-12

Laminated Bumper Standard Black 12" x 12" 4" Projection Horizontal Installation

  • For use in low to medium traffic loading docks in factories and warehouses.
  • Can be used as rub rails at the sides of truck wells
  • Fabric reinforced rubber pads cut from recycled truck tires.
  • Rubber pads laminated between steel angles and secured with 3/4” rods
  • Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
  • Wall mounting hole size is 1” diameter.
    • .......more details
MG020-B-2E-04

Miller Edge Sensing Edge Black 2-Wire End Outlet 4ft Long

  • Electromechanical slide in edge with a small profile for motorized gates and doors rolling shutters and pinch point protection applications.
  • Touch sensitive signaling
  • Temperature range: -30F to 155F
  • Lead wire: 18 gauge 2ft length
  • Sensitivity: nominal 4 PSI
  • 2 wire NO configuration
    • .......more details
200BL-10

2" Light Brush Insert 10ft Long

  • Polypropylene bristles
  • Same as MS1703-120
17314

Doorlec DC-3200R Industrial Receiver EEMAC 1 up to 32 Doors or Gates (Includes Extra Long Antenna PN# 17355)

  • Works with Doorlec 17315 remote control to 32 doors
Wiring instructions
MB-01003

Micanan Electric Motor Only 1/2HP 110/220V 1PH C-Flange TEFC 56C

  • C-Flange TEFC electric motor
  • Fits models: GT GH GHC & GSD
ALUM-506

Aluminum 24" x 100' Spool Windswept Smoke/ Vent Fumee # 506

  • 20% thicker than the aluminum sold in retail stores (0.022" )
  • Gentek # 506
  • Reverse side is #431 Bright White
Colour chart
K75-34791

LiftMaster Clutch Kit for SL585

  • Kit includes: Clutch disk Clutch plate Torque Limiter Hub Sprocket Washer E-Rings Nut Bearings and Compression spring
2650-112-05

Linear Cold Weather Package 230V SLC gate Op. Only

  • Cold weather package includes: Arctic oil Heater Cogged V-belt
WOR

Linear Wiegand Output Receiver 318 MHz

  • Designed for use as an access control interface for Linear’s block coded digital transmitters.
  • The unit receives signals from transmitters adds a facility code to the data and sends the information to the Wiegand input of the access control panel via a 5-wire connection
  • Ideal way to facilitate handicapped access
  • Multi-button transmitters can double as personal emergency devices for triggering security alarms
  • RF input/Wiegand output receiver supports 26 30 and 31-bit data formats
  • Wide selection of MegaCode (over 1 million codes) format transmitters with available block coding
    • .......more details
PRO-HBH10011U-R

Micanan 1 HP 115V 1P Heavy-Duty Jackshaft N1 Eyes Monitored ECB Right Hand (Pro-HHD)

  • 1 HP115V 1 PH Industrial Continuous Duty Jackshaft Operator Ideal for Sectional Doors Rolling Steel
  • Monitored logic board with integral 372Mhz radio receiver that can hold up to 20 transmitters (MK-00647/ MK-00653/ MK-00659) or 200 of the 1 channel hand held transmitters (MK-00660).
  • N-1 Through-beam (MK-00649) photocells included. Other options available.
  • 3-btn o/s/c (02-103) wall control station included
  • Adjustable Friction Clutch 5L320 drive belt
  • #50 Roller chain 18 tooth door sprocket included
    • .......more details
12-1028

Strip Curtain Clear Smooth Low Temp. PVC 8" wide Cut to Length

  • 8" wide .080 thick
  • Cut-to-length and pre-punched
GL-24-LED

Guide Lights for Loading Docks Amber LED 12-24VAC/DC 24-3/8" long Sold Individually

  • LED lights offer long-lasting reliable high-visibility in all weather conditions including direct sunlight with low power consumption.
  • Robust housing resists impact and corrosion.
  • Slim discrete design ensures little risk of damage due to accidental impact.
  • Wide input voltage range of 12-24Vac/dc (control box available for alternate voltages).
  • Boards coated in water-resistant polymer for optimal protection from water and humidity.
  • 24 LEDs per guide light
    • .......more details
K20-1050B-1RL

LiftMaster Electric Motor 1/2 HP 115V 1Ph BM

  • 1/2HP 115V 1 PH resilient base mount motor with one drive shaft key.
  • Check the manual for your specific model number before ordering to ensure compatibility.
CPS3-N4

LiftMaster Option Card with CPS-UN4 Eyes for applications requiring 2 sets of photocells

  • For applications requiring two sets of photoeyes in a damp location
  • Range up to 45ft water dust and corrosion proof eyes (Nema 4x rating)
  • Works with Logic 3 4 5 Commercial Operators
  • Includes Durable steel brackets - floor or track mounting
  • Kit Inludes one set of CPS-UN4 and one CPS3 card ( CPSIII )
71-90TS

LiftMaster Timer Kit for TS Wiring

  • Field mod. kit
PMR10RGT

Carlo Gavazzi Retro-Reflective Sensor

  • PMR series sensors have a sensing range up to 32.81 feet and a fixed sensitivity.
  • Immune to ambient light Selectable output function.
  • The plastic housing is IP 67 rated and allows cable or screw terminal connections.
  • Optional timing features include: Delay on operate delay on release or one shot (triggered on leading or trailing edge).
  • 24-240 VAC or 12~240 VDC
  • 5 Wire
    • .......more details
20113R

Genie Limit Switch Screw Drive

  • For use on Genie screw-drive openers.
  • Compatible with ALL Genie Screw and Trac Drive garage door openers with standard rail assemblies
  • Replaces either the UP or the DOWN limit switch
  • Replaces Genie Genius Trac Drive limit switch models 19795S and 22785R
  • Not compatible with excelerator models
PC50CNT20KIT

Carlo Gavazzi Transmitter and Receiver Thru Beam Kit 20m Range (PC50CNT20R and PC50CNT20RP)

  • Kit includes PC50CNT20R (emitter) and PC50CNT20RP (reciever)
  • Operates on 12-240 VDC and 24-240 VAC supply voltage.
  • The PC50CNT20R has a 3 amp relay output
  • Adjustable sensitivity modulated infrared light make and break (light/dark) switching function LED indications for output ON signal stability and supply ON
  • Same as Albany 4904R0007 / PC50CNT20RP8M1370
MEL-T315

Miller Edge MEL Transmitter 315 MHz 2nd Generation

  • MEL provides a wireless signal transmission from an edge sensor to operator controls eliminating the need to hard wire these devices
4690-040

Plate Mount Isolator

  • Vibration and noise isolator
  • Failsafe design prevents the bolt from falling should the rubber break
  • Reduces noise transfer from opener to building
  • Universal design allows for easy installation
  • Accepts 3/8” bolt
  • 300lb Max load
    • .......more details
Specifications
LDM-1

Long Distance Module

  • Compatible with all door and gate operators that use 24V AC
  • 20 mile range
K74-30754

LiftMaster Battery Harness 1 unit only

  • For LA400
  • 2 harnesses required per operator- 1 for each battery
2B735

LiftMaster Main Board EL25 (041B0735)

  • Same as 041B0735
DL-4000-8

Dock Leveler Retainer Galv. Steel Weldable 8' Long

  • Weldable to sides of dock leveler
  • Use with 4007 aluminum retainer & light brush (not included).
  • Vinyl insert slides into this outer retainer.
MD-00031

Roller Chain #40 Nickel Plated Sold by the Foot

SPECIALPANEL001

Manaras Complete C-Box Special Order

  • Includes limit system limit shaft.
C-600-114-INSTL

Cones 6" 1-1/4" bore Factory Installed (Pair)

  • For do-it-yourself installation use part no. SF600-114
37030A

Genie Motor Assembly DC

  • Works with Genie ReliaG 800 2022 2024 and 2042
  • Replacement powerhead motor assembly
053156

Magnetic Mount Micro Dome Beacon Amber ** To Extent of Inventory

  • 60 LEDs 360 degree revolving flash / intermittent flash
  • -30 degree celsius to + 50 degree celsius extreme temperature reliability
41A2770-17

LiftMaster Hardware Kit for 8550 8160W

  • Universal Hardware bag for LiftMaster 8550 8160W Operator.
MX00140-NEW

Micanan Brake Assembly for PRO-TB/APTB NO Solenoid - New Model (SBR-N1-00-TTBPAPT)

MOTOR403

Manaras Electric Motor 1/2HP 120V 1PH

  • Instant reverse
  • Medium-duty 1500 rpm
  • For OMJ/OMH
CP-LX700

Lynx 1-btn Transmitter 372 MHz for Commercial Op with UL325 Board

  • Works on the UL325 commercial operators
  • Not compatible with the 372HMz residential operators
  • Works with on-board receiver on Lynx UL325 operators
  • Currently no external receiver compatible with this transmitter
Programming instructionsInstructions de programmationCompatibility chart
1005-1-1/2-10'

Aluminum Bottom Retainer U-Shaped 10' Long

  • For door thickness 1-1/2"
J751L5

LiftMaster Industrial-Duty Jackshaft 3/4 HP 115/230V 1Ph L5

  • Doors used with this operator should be balanced with the ability to be manually lifted by hand in an emergency or power outage.
  • The operators are typically mounted to the wall when used with smaller sectional overhead doors with a vertical or high lift and mounted to the wall or the front of the hood when used with rolling doors and grilles.
  • J operators are attached to the door jackshaft to indirectly drive the door
  • MyQ® Technology enables you to securely monitor and control your facility operator and lights with your smartphone tablet or computer for greater peace of mind.
  • Security+ 2.0® safeguards your facility – with every click a new code is sent to the commercial door operator so the door opens only for you
Installation manualManuel d'installationSell sheetBrochure
R5202

Pulley 3" Zinc Plated Steel with Sheave Strap

  • Bored for 3/8" diameter bolt
  • Maximum cable diameter: 3/16"
  • Hardened inner race.
OSH-6233-CONT-L

Manaras Opera-SH 3/4 HP 208V 3 Ph Contactor Left Hand

  • An ultra high-end heavy-duty V-belt drive industrial jackshaft operator
  • For use on Standard High and Vertical Lift sectional doors
  • Can also be used on Rolling doors and Grilles
  • Comes with a chain hoist for manual operation and a floor level engaging device
  • Clearence: side room required 16"
  • 25 cycles per day > 100 cycles per day
    • .......more details
Installation ManualSell Sheet
.250-258-L

Cut-to-Length Torsion Spring .250 x 2-5/8" Left Hand Wound Green

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-258-INSTALLED
K75-34790

LiftMaster Disconnect Kit for SL585

  • Kit includes: Release lever bracket cable compression spring washer screws clevis pin bushings roll pin bolts nuts & handle
Installation Manual
3BLM-BC

Exterior Control Station 3 Button N4 with Mortise Lockout in Metal Enclose and Best Cylinder

  • Open-Close-Stop
  • Dimensions: 7" h x 2-3/4" w x 3-1/2" d
  • Exterior surface mount
3BLM-BC
26CW94522

Truck Door Intermediate Panel (12" x 98") Painted White for Whiting Dryfreight

  • These panels are cut to an extra wide width to fit wider vehicle applications.
  • Interlocking tongue and groove design for weather-tight joint and proper panel alignment.
  • 3/4" thick 7 ply exterior grade medium density plywood.
  • Painted white
HTRKITRSW

LiftMaster Self-Regulating Heater and Coil for RSW12V **DISCONTINUED

  • Protects system to -40F.
  • Installs into the operator frame
  • 120V
UNI-100-162

Uni-Size Bottom Weather Seal 16'2" Long *To extent of inventory*

  • Fits most standard doors 1-3/8" thru 2" thick
  • Pliable in all temperatures
  • Accepts pneumatic or electrical edge
  • 15 pieces per box
.295-258-L

Cut-to-Length Torsion Spring .295 x 2-5/8" Left Hand Wound Blue

  • Priced per inch
  • For factory installed cones priced seperately - use part no. C-258-INSTALLED
29-ABC-15

LiftMaster Fuse 15A

  • For VSL595 gate operator
361LMC

LiftMaster 1-btn Digital Transmitter 315MHz ***No Longer Available

  • 9 dip switch 315MHz transmitter
  • Compatible with Commercial operators L3 & L4
  • Visor clip and battery included (GP23A)
Programming InstructionsInstructions de programmation
25-4002-5K

LiftMaster 1.6-2.5 Amp Overload Fuse

  • For models: SL585-100-53 SL595-100-53 SL575-100-53
LD-11

EMX Base Socket 11-Pin DIN Rail Mountable Black (Was formally Grey)

  • For use with D-TEK detectors (most commonly used)
  • Hourglass shaped
MAW123-BLK-U

Miller Edge Air-Wave Edge Black Sold per Foot

  • This pressure sensitive air-wave edge can be adapted to suit a wide variety of applications.
  • When touch activated the MAW123 sends an immediate pulse of air through the extrusion to an air-wave switch which sends a signal to controls to stop and/or reverse operations.
  • It has been designed to fit most doors with double track bottom retainers.
  • With appropriate mounting channel this edge will fit nearly all doors from 11/2" to 2" thick.
  • The MAW123 is resistant to flame water and most common greases and oils.
41D605-1

LiftMaster Electric Motor 80kg/100kg

  • For retail models: WD952KD HD800D and WD952LD
Replacement InstructionsInstructions de remplacement
GH4416-02-L

Green Hinge #2 12-ga Left Hand *** No longer available

  • A unique spring-loaded hinge that allows automatic adjustment of the door.
  • Provides a close tight seal of the door to the building
  • Green powder coat finish
  • For doors up to 20ft
GH4416-02-R

Green Hinge #2 12-ga Right Hand *** No longer available

  • A unique spring-loaded hinge that allows automatic adjustment of the door.
  • Provides a close tight seal of the door to the building
  • Green powder coat finish
  • For doors up to 20ft
K001A6039

LiftMaster Control Board for LA400

  • Replaces P/N 127A0071C PN 127A0071F
Installation Manual
10TD433HH1

BEA 1-Button Digital Transmitter 433 MHz

  • Transmitter offering means of activation of automatic doors with extended hold feature.
  • Delay and no-delay learn modes for either instant of delayed activation for sequencing doors.
  • Operating temperature: -10 to 55C
  • Controls one 10RD433 receiver.
1104-8'-DES-SAN

Residential Side & Top PVC Weather-Strip with cap 8' Long - Desert Sandstone

  • Garaga desert sandstone rigid vinyl retainer with Garaga desert sandstone flexible vinyl seal.
  • Dual fin vinyl.
  • Comes with cap to hide screws.
41ASWG-438SA

LiftMaster Motor with Limit Switch Harness for LA400

  • Electric motor for LA400
H12G01-SS

Hinge #1 x 12 gauge Stainless Steel

  • Manufactured with 12ga. Rust-Resistant Stainless Steel
  • Universal Design
  • Fits Most Overhead Sectional Doors
  • Priced Per Each
MP00018

Micanan Up-Charge Track and #41 chain for 18' h Door *Actual length 246"*

  • For 3/4 HP and 1 HP operators only
MP00022

Micanan Up-Charge Track and #41 chain for 24' h Door *Actual length 318"*

  • For 3/4 HP and 1 HP operators only
K-LA500

LiftMaster Primary Replacement Arm Service Kit for LA500 Original Arm ** DISCONTINUED

  • Replacement arm only - no stripes old style
MBAT

LiftMaster Battery 7AH 12VDC

  • Single battery good for 40 cycles
  • Dual batteries recommended on gates over 16ft or 600 lbs.
SLT-17E

Rolling Steel 2" Flat Slat Clear Anodized

SLT14-22P

Rolling Steel 3" Flat Slat 22-ga Primed

SLT17-22

Rolling Steel 2" Flat Slat 22-ga Galvanized

.331-5-1/4-RH-C

Torsion Spring .331 x 5-1/4" x 144" RH Coated ** Price by Quote Only

  • Black Oxide coating
  • Wire size painted on spring
  • Wire size: .331 ID: 5-1/4" Length: 12 ft
.306-5-1/4-LH-C

Torsion Spring .306 x 5-1/4" x 144" LH Coated ** Price by Quote Only

  • Black Oxide coating
  • Wire size painted on spring
  • Wire size: .306 ID: 5-1/4" Length: 12 ft
.306-3-3/4-LH-C

Torsion Spring .306 x 3-3/4" x 144" LH Coated ** Price by Quote Only

  • Black Oxide coating
  • Wire size painted on spring
  • Wire size: .306 ID: 3-3/4" Length: 12 ft
PROBE-100

EMX CARSENSE-101 Direct Burial Probe with 100' Lead Wire

  • Wand only
  • Requires CS101 (Carsense-101)
.319-334-R

Cut-to-Length Torsion Spring .319 x 3-3/4" Right Hand Wound Blue/Green

  • Priced per inch. Cones sold separatly.
  • For factory installed cones order part # C-375-Installed
1110197

LiftMaster Take Up Bolt 3/8"-16

  • Measures 3-15/16" Long
  • Also known as: G115015 1110197 115015 11-10197