Devanco Canada

 
User Name:
Password:
Remember Me:
Forgot your password
Request a Login

178B35

LiftMaster Curved / Bent Arm Kit (41B0035B)

  • Will work with most residential garage door openers
  • Also known as: 4178B0035B 178B32 41B0035B 4178B35 178B35 012385990357 178B35B
26-14623

Truck Door Top Panel (13" x 98") for Todco DryFreight

  • These panels are cut to an extra wide width to fit wider vehicle applications
  • Interlocking tongue and groove design for weather-tight joint and proper alignment.
  • .75" thick 7 ply exterior grade medium density plywood
  • Primer finish
41D216

LiftMaster End Panel with all Labels and Light Socket

  • End panel that goes on model 8355
  • For the circuit board order 45ACT
7001-16-SANDSTN

Commercial Side & Top Weather-Strip 16' Long - Sandstone (D)

  • Sandstone galvanized steel with sandstone dual fin vinyl.
  • Commercial and Residential use.
  • Steel is notched on both ends for easier installation.
  • Also known as Taupe
  • Full case quantity only (10)
MB-01001

Micanan Electric Motor Only 1/2HP 110/220V 1PH

  • Base Mount motor O.D.P. FR56
  • Used on Micanan's T TB APT J EJ H EHJ HHD & SD
75-10170

LiftMaster Trolley-Slider Assembly (08-10169)

  • For LiftMaster trolley models MT T GT
  • Also known as: 307085008 75-10170 08-10169 085008 7510170
915007048X

Extension Cable 1/8" 7x19 14' Sold as a Pair

  • Cable assembly for extension spring door - looped on one end the other is raw (no stops)
1005-2-12'

Aluminum Bottom Retainer U-Shaped 12' Long***Actual Length 12'2"***

  • For door thickness 2"
MV-00026

Micanan 24V Commercial Receiver CR32-24V

G90-503000

LiftMaster Non-Resettable Counter 24VAC (50-12862)

  • Increases one number each time current is applied
  • Connects to the 24 volts of contactor coil
  • Simple 2-wire connection
  • Same as 50-12862
24851

Stanley Traveler Carrier Kit

  • Works with all Stanley chain drive units from 1992-present
  • Same as part no. 9200014
  • Trolley slider for part no. 49563
41A5624-8

LiftMaster DC Passpoint Assembly

  • Travel Module for 3850
41A1037

LiftMaster Chassis Bracket

  • To correct higher level of noise than normal due to vibration from the powerhead.
  • Fits models 1355 3255 3270 3265-267 made between Jan-March 2014.
BK000

Residential Top Bracket Adjustable 1-Bolt Sold per Piece

  • Same as part number 3-31-1
  • Sold per piece - not a pair
EL25KEY

LiftMaster Replacement Key for EL25 (041B0012)

  • One (1) key for the EL25
  • Same as 041B0012
CB18A0500

Cable 1/8" 7x7 500' Galvanized

  • Galvanized cable 1/8" 7x7 500ft spool.
76-G0537

LiftMaster Alarm Assembly Kit for SL540/580

MGT

Linear MegaCode Gate Safety Edge Transmitter 318 MHz (DNT00068)

  • The MGT is the industry’s only fully supervised gate safety edge transmitter.
  • It automatically sends an hourly status report to the access controller indicating battery condition and if the transmitter is operational.
  • Should the edge sensor be disconnected shorted or tampered with the MGT will report a trouble condition.
  • Features Include:
  • Signals access controller for stop or reverse when safety edge activates
  • No cables or coiled wires
  • .......more details
10-10355

LiftMaster Solenoid Link

.262-2-L

Cut-to-Length Torsion Spring .262 x 2" Left Hand Wound Red/Yellow

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-200-INSTALLED
309013

Linear 1-Channel Multi-Code Receiver 310 MHz

  • Three tabs for universal mounting
  • One N/O relay
  • Compatible with 310 MHz Stanley and Multi-Code transmitters only.
  • Operates on 24 VAC power
  • One channel
  • Codes: 1024 (set by dip switches)
  • .......more details
PS31L-NS11R1M00

Carlo Gavazzi Utility Switch

  • Switch DPST-NO/NC Chassis Mount
  • Actuator Type: Side Rotary Adjustable Roller
  • Termination Style: Screw Terminal
  • Ingress Protection: IP66 - Dust Tight Water Resistant
  • Switch Function: On-Mom Off-Mom
  • Current Rating (Amps): 5.5A (AC) 2.8A (DC)
  • .......more details
.273-134-R

Cut-to-Length Torsion Spring .273 x 1-3/4" Right Hand Wound Orange/Red

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-134-INSTALLED
GK-BX

Genie Dual Frequency Wireless Keypad 37224R *** To Extent of Inventory

  • Temporary PIN codes to allow for one time special access needs
  • Able to operate up to three Genie Intellicode garage door openers
  • Auto-seek dual frequency technology automatically transmits in both 315 and 390 MHz
  • Compatible with Intellicode 1 and Code Dodger series
ER100

Carlo Gavazzi Reflector 4" (100mm) Square

  • High quality reflector for retro-reflective photoelectric switches
  • Dimensions: 100 mm x 100 mm 9.2 mm thick
14FT-I-BEAM

LiftMaster 14' I-Beam Rail 3714RV / CD1014

  • I-Beam Chain Drive Rail for model 3595
ME113-R

Miller Edge Black Right Hand Outlet 2-Wire 1-1/2" wide x 1-1/2" high Sold by the Foot

  • Slide in edge designed for commercial sectional doors
  • Retrofits easily to 1-1/4" to 1-1/2" sectional doors
  • Touch sensitive signaling allows for immedita stopping or reversing of motion
  • For a sectional door: measure the daylight opening of the door or measure the panel width of the door
  • This gives you the "active length" of the edge - the length to order.
  • Lead wire: 22 gauge universal
  • .......more details
.343_6"-LH

Torsion Spring .343 x 6" x 12ft LH Blue/Red

  • Wire size: .343
  • Inside diameter: 6"
  • Length: 12 ft
.421_5-1/4"-LH

Torsion Spring .421 x 5-1/4" x 12ft LH Gold

  • Wire size: .421
  • Inside diameter: 5-1/4"
  • Length: 12 ft
.218_2-5/8"-LH

Torsion Spring .218 x 2-5/8" x 12ft LH Yellow/Orange

  • Wire size: .218
  • Inside diameter: 2-5/8"
  • Length: 12 ft
.234_2"-LH

Torsion Spring .234 x 2" x 12ft LH Blue/White

  • Wire size: .234
  • Inside diameter: 2"
  • Length: 12 ft
.218_2"-LH

Torsion Spring .218 x 2" x 12ft LH Yellow/Orange

  • Wire size: .218
  • Inside diameter: 2"
  • Length: 12 ft
.218_1-3/4"-LH

Torsion Spring .218 x 1-3/4" x 12ft LH Yellow/Orange

  • Wire size: .218
  • Inside diameter: 1-3/4"
  • Length: 12 ft
365LMC

LiftMaster Universal Plug-in Receiver 315 MHz

  • Compatible with any garage door opener with a simple 2-wire dry contact
  • Includes 2-conductor bell wire
  • Able to accept 8 Security+ transmitters & 1 digital keypad
  • Compatible remotes; 893MAX 890MAX 892LT 373LM 371LM 374UT 375UT
MK00066

Reversing Contactor Allen Bradley 24V coil

  • Allen Bradley no. 104-C16KJH22-X6
  • Cat. no. 100-C16*10
972LMC*

LiftMaster 2-btn Security+ Transmitter 390 MHz ***Discontinued

  • Both buttons feature Security+ rolling code technology
  • Compatible with models manufactured from 2005
  • Second button can learn other shared Liftmaster radio-controlled devices.
  • Includes visor clip and Lithium battery CR2032
19-40HL

Half Link #40

  • Half link for #40 chain
  • ANSI Standard Carbon Steel
41A5483-1C

LiftMaster Circuit Board Assembly *** Discontinued

  • Assembly includes: Circuit board and end panel
  • For chain drive units with one light
  • Fits models 2245 & 2255
  • Last letter of the part # indicates revision date the most recent product will be sent out
  • Also known as 41A5483-1 41A5483-1B
T-833-C

FL-Allstar 3-btn 9-Door Transmitter 109023-311 MHz***NLA

  • This nine channel transmitter controls up to nine doors (open-close) or three doors (open-close-stop).
  • It has a height switches encoder with three positions: + 0 and - .
  • Manufacturer's model number: 8833TC (190-109023)
  • Dimensions: 4 5/8" x 2 1/4" x 7/8"
CAM005

Manaras Limit Cam 5/8-18 UNF

  • Limit cam for Mountshaft009
  • 2 cam's required per shaft
19-41HL

Half Link #41

  • Half link for #41 chain
  • ANSI Standard Carbon Steel
.363_6"-RH

Torsion Spring .363 x 6" x 12ft RH Green/White

  • Wire size: .363
  • Inside diameter: 6"
  • Length: 12 ft
.306_6"-RH

Torsion Spring .306 x 6" x 12ft RH Red

  • Wire size: .306
  • Inside diameter: 6"
  • Length: 12 ft
.421_5-1/4"-RH

Torsion Spring .421 x 5-1/4" x 12ft RH Gold

  • Wire size: .421
  • Inside diameter: 5-1/4"
  • Length: 12 ft
.262_3-3/4"-RH

Torsion Spring .262 x 3-3/4" x 12ft RH Red/Yellow

  • Wire size: .262
  • Inside diameter: 3-3/4"
  • Length: 12 ft
.250_2"-RH

Torsion Spring .250 x 2" x 12ft RH Green

  • Wire size: .250
  • Inside diameter: 2"
  • Length: 12 ft
.192_2"-RH

Torsion Spring .192 x 2" x 12ft RH Silver

  • Wire size: .192
  • Inside diameter: 2"
  • Length: 12 ft
.295_1-3/4"-RH

Torsion Spring .295 x 1-3/4" x 12ft RH Blue

  • Wire size: .295
  • Inside diameter: 1-3/4"
  • Length: 12 ft
.218_1-3/4"-RH

Torsion Spring .218 x 1-3/4" x 12ft RH Yellow/Orange

  • Wire size: .218
  • Inside diameter: 1-3/4"
  • Length: 12 ft
11801

Doorlec Oilite Cam

  • Fits 5/8" shaft fine thread.
  • Grooved 5/8" - 24 x 3/8"
  • Requires 2 per cam shaft
17335

Doorlec DC-3100T 4-btn O/C/S Compact Transmitter 301 MHz

  • 3 buttons for O/C/S and 1 button for turning lights ON/OFF
  • Includes 12V battery
  • Dimensions: 3-1/4" l x 1.5" w x 1/2" thick
MK00641

Micanan Smart 10.0 Full Feature Circuit Board Monitored with 5 Relays

  • For 1/3 1/2 and 3/4 Hp - 110/220V 1p 230V 3p
  • Board has P1 & P2 terminals
  • Up to 20 transmitters can be programmed
MJ00002

Micanan Brake Shoe - Right **No Longer Available**

  • Only available in complete kit # MJ00013 or MJ00014 for PRO-GH
PL-BO7-CRGSLIDE

Lynx Carriage Assembly (Nylon) *** No Longer Available

  • Proline / Lynx 455 Plus trolley slide assembly
  • For operators built from 2000 +
H14G02

Hinge #2 x 14 gauge

  • Bright zinc plated 14-gauge steel hinge
  • For use with 7/16" diameter stem rollers
  • Full body hinge 2-3/4" wide
  • #2 position
  • Use between sections 2 and 3
  • Same as part number 242
  • .......more details
SEL2641R433-IP

Erone 2-Relay Stand Alone Receiver Pulse/Latch or Delayed Relay Output 433MHz

  • Up to 85 transmitter keys
  • 1 NO relay + 1 NO/NC relay (24VA)
  • Self-learning memorization
  • Standard pulse latched or timed relay output
  • Power requirements: 12/24Vac/dc
  • Dimensions: 105 x 45 x 28mm (4.3 x 1.75 x 1.1in)
  • .......more details
14FT-TROLLEY-SET

LiftMaster 14ft Double Angle Rail Set for Comm. Trolley Ops 10-5814-P (2 pcs) *Actual length 203"*

  • Double Angle Rails for doors up to 14' high
  • Works with models : MT T GT APT
  • Indicated selling price is calculated with the purchase of a commercial operator. For pricing on a double angle rail only please contact us
  • Actual Length 16' 11"
LIMIT021

Manaras Single Limit Switch with Flat Lever

  • Single limit switch (SPDT) used to stop the door at top and bottom or as disconnect switch
  • Unimax
  • Snap-action
5377.115

Whiting Side Seals 1/2" Track Spacing 115" Long

  • Most common side seal for Whiting Dry Freight doors.
  • 115 inches will fit almost every size door.
2235.296

Whiting Coldsaver Bottom Panel 14-1/2" x xxx" with lock seal and retainer (Max 96")

  • Fits Coldsaver Roll-Up Doors
  • 1-1/8" thick max 96" wide
  • Includes Lock and keeper
308302

Linear 2-Channel Multi-Code Key Ring Transmitter 310 MHz

  • Open/Close remote for 2 doors
  • Compatible with 310 MHz Stanley and Multi-Code receivers
  • Easy access to battery and coding switches - 10 dip switches
  • Power: 12-volt battery
  • Codes: 1024 codes for each channel (set by dip switches)
  • RF frequency: 310 MHz
  • .......more details
109710

Linear 4-Channel Multi-Code Visor Transmitter 310 MHz

  • Open/Close remote for 4 doors
  • Compatible with 310 MHz Stanley and Multi-Code receivers
  • Supplied with visor clip
  • Easy access to battery and coding switches - 10 dip switches
  • Power: 9-volt battery
  • Codes: 512 per channel (set by dip switches)
  • .......more details
1336.4

Whiting Roadside Top Panel Closure Bracket for 8" radius track

1336.3

Whiting Curbside Top Panel Closure Bracket for 8" radius track

9931T

Allstar 1-btn Transmitter 108787 318 MHz ***Replaced by P-9931T

  • Compatible with Allstar and MVP receivers
  • Visor mounting clip supplied
  • Power: 9-volt battery
  • Codes: 19683 (set by nine trinary dip switches)
  • RF frequency: 318 MHz
  • Dimensions: 2.25" W x 4.625" H x 1" D Order number: 190-108787
  • .......more details
MGR

Linear 1-Channel MegaCode Gate Receiver 318 MHz

  • Single Form ”A” (normally open) relay rated at 30 Volts AC/DC up to 5 Amps
  • Supplied with whip antenna three feet of coaxial cable and bulkhead connector
  • Memory: storage for up to 40 MegaCode transmitters
  • Power: 12 - 30 VAC or 10.5 - 30 VDC
  • Codes: 1000000+ (MegaCode format)
  • RF frequency: 318 MHz
  • .......more details
8833TC-OCS

Allstar 3-btn 3-Door O/C/S Transmitter 109025 318 MHz ***Replaced by P-8833TC-OCS

  • Open/Close/Stop remote for 3 doors
  • Compatible with 3-channel Allstar and MVP receivers
  • Portable transmitter
  • Easy access to battery and coding switch
  • Slide switch selects door to operate
  • Power: 9-volt battery
  • .......more details
217436

Linear Drive Sprocket - Chain (HCT)

218014-02

Lamp Socket Assembly

  • For models LSO LCO LDO
RV-112

1-1/2" Vinyl Insert for Brush Retainer per foot

  • Color: Black
1003-4"-200FT

Bottom U-Rubber 4" Black 200' Long

  • 200ft spool of vinyl insert.
1003-3"-YELLOW

Bottom U-Rubber 3" Yellow 200' Long

  • 3" yellow vinyl insert 200ft spool.
1003-3"-200FT

Bottom U-Rubber 3" Black 200' Long

  • 200ft spool of vinyl insert.
1019-1-3/8-12'

Rigid Vinyl Bottom Retainer Flat 12' Long

  • Black - for door thickness of 1-3/8"
1015-1-3/4-24'

Rigid Vinyl Bottom Retainer Raised Centre 24' Long

  • Black - for door thickness of 1-3/4"
1007-1-5/8-24'

Aluminum Bottom Retainer Flat Fits Doors 1-5/8 to 1-3/4" Thick**Actual Length 24'4"

  • For door thickness of 1-5/8" to 1-3/4"
  • die # A-25388
1006-1-1/2-8'

Rigid Vinyl Bottom Retainer U-Shaped 8' Long

  • Black with flexible fin to touch door face.
  • For door thickness 1-1/2"
1005-1-3/8-24'

Aluminum Bottom Retainer U-Shaped 24' Long *** 24' is DISC

  • For door thickness 1-3/8"
1003-1-5/8-14'

Aluminum Bottom Retainer L-Shaped

  • For 1-5/8" thick doors.
1104-7FT-BLACK

Residential Side & Top PVC Weather-Strip with cap 7' Long - Black (B)

  • Black rigid vinyl retainer with black flexible vinyl seal.
  • Dual fin vinyl.
  • Comes with cap to hide screws.
1104-8FT-BROWN

Residential Side & Top PVC Weather-Strip with cap 8' Long - Brown (N)

  • Brown rigid vinyl retainer with brown flexible vinyl seal.
  • Dual fin vinyl.
  • Comes with cap to hide screws.
24-RWB-PAIR

Winding Bars Round 24" Set of 2

  • Cold rolled hardened steel.
  • Machined to 1/2" at one end with 5/8" outside dia. on the other.
  • Sold as a pair.
1104-10FT-SAND

Residential Side & Top PVC Weather-Strip with cap 10' Long - Sandstone (D)

  • Sandstone rigid vinyl retainer with sandstone flexible vinyl seal.
  • Dual fin vinyl.
  • Comes with cap to hide screws.
  • Also known as Taupe
1104-8FT-SAND

Residential Side & Top PVC Weather-Strip with cap 8' Long - Sandstone (D)

  • Sandstone rigid vinyl retainer with sandstone flexible vinyl seal.
  • Dual fin vinyl.
  • Comes with cap to hide screws.
  • Also known as Taupe
7001-12-WHITE

Commercial Side & Top Weather-Strip 12' Long - White (W)

  • White galvanized steel with white dual fin vinyl.
  • Commercial and Residential use.
  • Steel is notched on both ends for easier installation.
7001-10-WHITE

Commercial Side & Top Weather-Strip 10' Long - White (W)

  • White galvanized steel with white dual fin vinyl.
  • Commercial and Residential use.
  • Steel is notched on both ends for easier installation.
1102-14-BLACK

Commercial Side & Top Weather-Strip 14' Long - Black

  • Aluminum retainer with black heavy-duty dual fin vinyl.
1001-12-GREY

Commercial Side & Top Weather-Strip 12' Long - Grey

  • Aluminum retainer with grey dual-fin vinyl
  • Sold by full case quantity (10)
32-48-130

Extension Spring 8' Door - 130 lbs Yellow ** Replaced by 27-48-130

  • Double - Loop
  • 32" long 48" stretch 130 lb load
  • Springs sold individually
32-48-100

Extension Spring 8' Door - 100 lbs Tan ** Replaced by 27-48-100

  • Double - Loop
  • 32" long 48" stretch 100 lb load
  • Springs sold individually
95-00115

Truck Door Rivet 1-1/8" Stainless Steel

  • Stainless steel construction
  • Round head design
  • Cross Reference: T #89217-0036
95-00114

Truck Door Rivet 1" Stainless Steel

  • Stainless steel construction
  • Round head design
  • Cross Reference: T #89217-0032
94-00002

Truck Door Clevis Pin 1/4" x 7/8"

  • Zinc Plated finish
  • 1/4" x 7/8"
28-32081

Truck Door 2" Horizontal Track with 8" Radius 120" Roadside (LH) for Whiting Roll-Up Doors

  • SPECS: Length: 120" Fits door sizes: Greater than 96" high
  • Cross Reference: W #11-3
  • Galvanized steel 14 gauge construction
  • Tongue and groove for proper alignment at joints
  • 8" radius
  • For use with 2" diameter steel or nylon rollers
  • .......more details
27-20400

Truck Door Bracket for Torsion Assembly Roadside (LH) for Todco Roll-Up Doors

  • Steel construction
  • Zinc plated finish
  • Cross Reference: T #51036-2 W #4028 360000
26-94325

Truck Door Bottom Panel with Seal (15" x 98") for Whiting Dryfreight

  • These panels are cut to an extra wide width to fit wider vehicle applications.
  • Interlocking tongue and groove design for weather-tight joint and proper panel alignment.
  • These panels have no routs and shipped without holes.
  • 3/4" thick 7 ply exterior grade medium density plywood. Primer Finish
  • Comes only with bottom retainer and seal (installed)
26-40027

Truck Door Bottom Seal 98" Long for Whiting Dryfreight Doors

  • Flexible PVC material
  • Cross Reference: W #1676
26-14323

Truck Door Bottom Panel with Seal (13" x 98") for Todco DryFreight Doors

  • These panels are cut to an extra wide width to fit wider vehicle applications.
  • Interlocking tongue and groove design for weather-tight joint and proper panel alignment.
  • 3/4" thick 7 ply exterior grade medium density plywood. Primer finish
  • Comes only with bottom retainer and seal (installed)
26-14322

Truck Door Bottom Panel with Seal (12" x 98") for Todco DryFreight Doors

  • These panels are cut to an extra wide width to fit wider vehicle applications.
  • Interlocking tongue and groove design for weather-tight joint and proper panel alignment.
  • 3/4" thick 7 ply exterior grade medium density plywood Primer finish
  • Comes only with bottom retainer and seal (installed)
25E10003

Truck Door Roller Cover for End Hinge Black E-coat finish for Whiting Roll-Up Doors

  • Steel construction Black E-coat finish
  • Cross Reference: W #1208 T #70161