Devanco Canada - Get The Right Garage Door Opener‎ and Parts

MM-00057

Micanan Wall Mounting Bracket (GH reducer 50/70)

MHS5011U-RH

LiftMaster 1/2 HP 120 Volt Medium Duty Slow-Speed Jackshaft Operator

Designed for use on rolling sheet doors.
It features an adjustable friction clutch high-starting torque motor with overload protection emergency chain hoist with electric interlock and emergency disconnect chain.
Easy emergency manual operation using a floor level disconnect and an electrically interlocked chain hoist mechanism
Floor level disconnect
24V NEC Class 2
Wiring is factory present to C2 mode

.......more details

Installation manual Sell sheet

95358

Marantec Front Idler Assembly

Complete Roller holder assembly for ML-Series rails
Used for belt and chain drive opener rails
Same as # 8030432

65-52091-16

LiftMaster Manual Hoist Mod. M8 #41 Chain for 16ft High Door

For 3/4 Hp & 1 Hp Trolley operators
Includes floor level brake release cable 1" x 12' round bar.

OSH-6233-ECB-LH

Manaras Opera-SH 3/4 HP 208V 3 Ph with Electronic Circuit Board Left Hand

An ultra high-end heavy-duty V-belt drive industrial jackshaft operator
For use on Standard High and Vertical Lift sectional doors
Can also be used on Rolling doors and Grilles
Comes with a chain hoist for manual operation and a floor level engaging device
Clearence: side room required 16"
25 cycles per day > 100 cycles per day

.......more details

Installation manual Sell sheet

MOTOR275

Manaras Electric Motor 1HP 208/460V 3PH

Continuous-duty base mount
This item is compatible with BRAKE011

PHOTO-038

Manaras Non-Monitored Photoelectric Cells Nema 4/4X/6P/12/13 Retro-Reflective

Retro-Reflective
24Vac 30' range
Includes 3" reflector

CPT-210-50

Miller Edge Bulk Extrusion 50 ft Roll

For do-it-yourself edges on sectional or rolling doors.
Black
End plugs adhesive and mounting channel sold separately.
Sensing edge size: 1-5/8"H x 1-3/4"W
When combined with the ME123 mounting channel it can be installed on doors measuring 1-1/2" to 2" thick.

Installation Manual Sell Sheet

39-16759

LiftMaster Clutch Pad for EGJ ***NLA NO SUB

UNI-100-122

Uni-Size Bottom Weather Seal 12'2" Long *To extent of inventory*

Fits most standard doors 1-3/8" thru 2" thick
Pliable in all temperatures
Accepts pneumatic or electrical edge
15 pieces per box

T114

Manaras Trolley Track 14ft for 3/4HP & All APT models up-charge *Actual length 198"*

For models MGT/OTH/OTBH 3/4 hp only with Chain #41

361LMC

LiftMaster 1-btn Digital Transmitter 315MHz ***No Longer Available

9 dip switch 315MHz transmitter
Compatible with Commercial operators L3 & L4
Visor clip and battery included (GP23A)

Programming Instructions Instructions de programmation

5001-8-CHARCOAL

Residential Side & Top Weather-Strip 8' Long - Charcoal

Painted aluminum retainer with flexible dual fin vinyl.
Residential use.
Sold by full case quantity (20)

68-9E

Wheel Chock 68-9E Pyramid Rubber with Eye Hook

Handles for chain fastening
Long Lasting 80 Durometer rubber
Size: 8" wide x 9" long x 6" high

97-75000

DOT-C2 Reflective Tape 24" x 2" W 6" Red x 6" White Pattern

DOT-C2 certified exceeds NHTSA requirements
Highly reflective even up to a 90 degree angle
Quick and easy to apply

.375-6-LH-C

Torsion Spring .375 x 6" x 144" LH Coated ** Price by Quote Only

Black Oxide coating
Wire size painted on spring
Wire size: .375 ID: 6" Length: 12 ft

12-19504

LiftMaster Flanged Bearing 1" Keyed

MP00013

Micanan Up-Charge Track and #410 (#48) chain for 14' h Door *Actual length 198"*

For 1/3 HP and 1/2 HP operators only

7096

Whiting Cable Drum Assembly for 2-5/8" ID Spring Wire Curbside (RH)

A Whiting original
Cable drum and bearing

7549

Whiting Winding Cone for 2-5/8" ID Spring Wire Curbside (RH)

A Whiting original

7550

Whiting Winding Cone for 2-5/8" ID Spring Wire Roadside (LH)

A Whiting original

SLT14-18P

Rolling Steel 3" Flat Slat 18-ga Primed

GH153-L5

LiftMaster Gearhead with Brake 1-1/2 HP 208/230/460V 3P L5

Gearhead style commercial door operators employ lubricated gears for heavy industrial high cycle applications.
GH-style operators include a floor level chain hoist to ease manual operation in an emergency or power outage.
Hoist wheel is easily moved to Right or Left hand side of unit eliminating the need to order right or left hand mounting.
MyQ Technology enables you to securely monitor and control your facility operator with your smartphone tablet or computer. Internet Gateway 828LM required.
Security +2.0 radio receiver safeguards your facility - with every click a new code is sent to the commercial door operator so the door opens only for you.
Timer-To-Close: Conveniently and confidently closes the commercial door automatically after a predetermined amount of time has elapsed for added security and peace of mind.

.......more details

Installation Manual Manuel d'Installation Sell sheet Brochure

.319-6-RH-C

Torsion Spring .319 x 6" x 144" RH Coated ** Price by Quote Only

Black Oxide coating
Wire size painted on spring
Wire size: .319 ID: 6" Length: 12 ft

Q310

LiftMaster Surge Protection for MIR-1 ( K74-50271) ** DISCONTINUED

For the Miracle-One single arm gate operator
Same as part no. K74-50271

BK301

Jamb bracket J-01 #1 12 gauge

Sold by the piece
Height 2.40" Length 1.9" Width 2.45"
Bright zinc plated 12 gauge steel
2" long track mounting slot
manufactured to accept ¼” fasteners when attaching to the track and 5/16” to lag to the wall.

SOLID_SHAFT_12'

Solid Shaft 1" Keyed 12 ft Galvanized

Actual length is approx. 12'-1"

SEL2641R433-IP5

Erone 2-Relay Stand Alone Receiver Up to 500 Users 433MHz

2 transmitter keys per user
1 NO relay + 1 NO/NC relay (24VA)
Self-learning memorization
12/24V AC/DC

Wireless System Chart

OPH-6213-ECB

Manaras Opera-H 3/4HP 240V 1Ph with Electronic Circuit Board

A heavy-duty industrial jackshaft operator
For use on Standard High and Vertical Lift sectional doors
Can also be used on Rolling doors and Grilles
Comes with a self-engaging chain hoist for manual operation
Clearence: side room required 15"

Installation Manual Sell Sheet

K1D7545CC

LiftMaster Control Board Assembly for LA500 ** To Extent of Inventory

014D1065G

PPLK1-10

LiftMaster Passport Lite 1-Button Mini Remote with Sec+ 2.0 Technology 10/PKG

Passport Lite Remote Controls provide cost-effective single button access solutions for gate access only or high-capacity commercial properties applications such as employee parking lots and tenant garages.
These remote controls are specifically designed for gate access control and are not compatible with LiftMaster Garage Door Openers.
2x the range of standard remote controls
Narrow-band transmission on 3 simultaneous frequencies (310 MHz 315 MHz 390 MHz)
Compatible with LiftMaster® commercial receivers (850LM 860LM PPWR STAR1000) and Security+ 2.0™ Gate Operators
Keychain remote control sold in a 10 pack

.......more details

Programming Instructions Instructions de programmation Sell Sheet Brochure

OPH-6212-ECB

Manaras Opera-H 1/2HP 240V 1Ph with Electronic Circuit Board

A heavy-duty industrial jackshaft operator.
For use on Standard High and Vertical Lift sectional doors.
Can also be used on Rolling doors or Grilles.
Comes with a self-engaging chain hoist for manual operation.
Clearence: side room required 15"
25 cycles per hour 100 cycles per day

.......more details

Installation Manual Sell Sheet

21002

Doorlec Hoist Interlock Switch

MI00002

Micanan Pulley 8" OD c/w Bushing 3/4" ID

75W-RS-BULB

Rough Service Bulb 75W ** Disc. to extent of inventory

82-NH25-03

LiftMaster Set Screw only

For 1/4-20-03

7001-8-W/B

Commercial Side & Top Weather-Strip 8' Long - White and Black (WB)

White galvanized steel with black dual fin vinyl.
Commercial and Residential use.
Steel is notched on both ends for easier installation.
Full case quantity only (20)

SCRUBS-PAIL

Scrubs Hand Cleaning Towels 72 Towels per Pail*** Special Order Sold by Quote Only

The citrus-based formula and textured towel combination works to loosen dissolve and absorb the toughest materials
Each pail contains 72 towles
6 pails per case

763

Fasteners Flat Head Carriage Bolt 1/4-20 x 2-1/4" 1000/Box

Full length thread
Max torque = 6

756

Fasteners Slotted Track Bolt 1/4-20 x 5/8" 1000/Box *** Temp Unavailable *** Offer 734

Knurled shank
Max torque = 6

790

Fasteners Hex Nut 3/8-16 1000/Box

41A5389-1E

LiftMaster Receiver Logic Board

For low profile screw drive models with one light
Fits models 2110 2220

Replacement Instructions

772

Fasteners Lag Screw Hex Washer High Profile 5/16" x 2" 1000/Box *** Temp. NLA

7/16" Head
Hex washer high profile head

K21-36793

LiftMaster Transformer 208-230/460 Volts 20Va

230/460V PRIMARY 24V SECONDARY 20VA

K72-12515-1

LiftMaster Limit Switch Kit

For models T H Logic 5 and various L3 L4 commercial operators
Also known as: K75-12515-1 K75-12514

26-14625

Truck Door Top Panel (15" x 98") for Todco DryFreight

These panels are cut to an extra wide width to fit wider vehicle applications
Interlocking tongue and groove design for weather-tight joint and proper alignment.
.75" thick 7 ply exterior grade medium density plywood
Primer finish

CPT4

LiftMaster Passport 4-Btn Remote Control ** Discontinued

The CPT-4 remote operates up to four different Security+ devices.
Three of the four buttons can operate with a telephone entry or access control system .
Great for gated drives or commercial uses.
Passport Technology use with CPWR Wiegard Receiver.
Also compatible with Homelink systems

Programming Instructions

41DB001-1

LiftMaster Circuit Board Assembly

For belt drive unit model 3500 (315MHz)
Assembly includes: Board end panel and light socket
Also known as 041DB001-1C

41AC175-2

LiftMaster Electronic Circuit Board Assembly

For Sears / Craftsman garage door opener

PED72

Pedestal Post 72" Gooseneck Pad Mount

Black powder coat finish
Faceplate with universal hole pattern to fit almost any access device
2" x 2" square post
Neck is bent with a 6 in. center radius giving a tight professional look

M3-2314

Marantec 4-Button Transmitter 315 MHz 97244/122468

Same as part # 65893 and 97244
Visor mount
Includes battery CR2032
Made in Germany

Instructions

41A1037

LiftMaster Chassis Bracket

To correct higher level of noise than normal due to vibration from the powerhead.
Fits models 1355 3255 3270 3265-267 made between Jan-March 2014.

SMDRG

Linear 1-Ch Gate Receiver MegaCode 318 MHz *** No Longer Available

High gain superheterodyne receiver
High RFI immunity
Supplied with F-connector whip antenna and mounting bracket
Memory: storage for up to 40 MegaCode transmitters
Power: 24 VAC/VDC
Codes: 1000000+ (MegaCode format)

.......more details

Programming Instructions

BK150/PR

Residential Bottom Bracket BB-100 sold as a pair

For use with 2" rollers
Works on 1-3/8" 1-1/2" 1-3/4" and 2" doors
13 gauge residential bottom bracket that secures to the bottom of the door allowing the cable to be attached to the door for lifting
Same as part number 263

.207-258-L

Cut-to-Length Torsion Spring .207 x 2-5/8" Left Hand Wound Brown

Priced per inch - cones sold seperately
For factory installed cones use part no. C-258-INSTALLED

.262-2-L

Cut-to-Length Torsion Spring .262 x 2" Left Hand Wound Red/Yellow

Priced per inch - cones sold seperately
For factory installed cones use part no. C-200-INSTALLED

CABLE_1/8-SS

Cable 1/8" 7x19 1000' Stainless Steel ** Price on request

21-3260-1

LiftMaster Transformer 50/60Hz 60va 120/208/240/480V

120/208/240/480V PRIMARY 24V SECONDARY

ME113-C3

Miller Edge PVC Mounting Channel "L" Shape Sold by the Foot

.375_6"-LH

Torsion Spring .375 x 6" x 12ft LH Yellow/Green

Wire size: .375
Inside diameter: 6"
Length: 12 ft

.406_3-3/4"-LH

Torsion Spring .406 x 3-3/4" x 12ft LH Blue/Yellow

Wire size: .406
Inside diameter: 3-3/4"
Length: 12 ft

374LMC*

LiftMaster 4-btn Sec+ Transmitter 315 MHz - DISC

Compatible with wireless keypad model number 377LMC
Compatible with Liftmaster garage door opener model numbers 3595 3585 3575 3500 3280 3265 3220 3255 3245 3110 1356 1355 1346 1345 ATS2113X ATS2113X-CX HCT501130 LGO50113O LGO50113L LGO50113R LGO50113XR
This transmitter is replaced by 894LT

9V

Battery 9V Alkaline Duracell Procell sold individually

71-B120

LiftMaster Interior Mount Solenoid Brake 115V

Instruction Manual

.192_1-3/4"-RH

Torsion Spring .192 x 1-3/4" x 12ft RH Silver

Wire size: .192
Inside diameter: 1-3/4"
Length: 12 ft

25-60652

Truck Door Reefer Bottom Roller Bracket Assembly for Whiting Style Doors ** To Extent of Inventory

Steel construction Black E-coat finish
Consist of roller clamp wear plate stud plate and 5/16" lock nuts
Stainless steel studs and nuts
Cross ref: 5600

H14G01

Hinge #1 x 14 gauge

Bright zinc plated 14-gauge steel hinge
For use with 7/16" diameter stem rollers
Full body hinge 2-3/4" wide
#1 position
Use between sections 1 and 2 or in the center position
Same as part number 241

.......more details

RADIO-28

Manaras MTM-1000 1-btn mini transmitter 313 MHz ** To extent of inv*** Repl. by RADIO-EM901

Open/Close mini remote for 1 door
Comes with LED battery life indicator
Mini 12V battery included
Key chain holder included

RADIO-16

Manaras MT2-1000 2-btn transmitter 313 MHz****Replaced by RADIO-EM903

Open/Close remote for 2 doors
Comes with LED battery life indicator
9V battery included
Sunvisor clip included

Programming Instructions

1336.4

Whiting Roadside Top Panel Closure Bracket for 8" radius track

1336.3

Whiting Curbside Top Panel Closure Bracket for 8" radius track

GRD

Linear 1-Channel Delta3 Gate Receiver 310 MHz (DNR00101) ***Discontinued

Auto voltage sensing - no jumpers to set
Single Form ”A” (normally open) relay rated at 30 Volts AC/DC up to 5 Amps
Supplied with whip antenna three feet of coaxial cable and bulkhead connector
Power: 12 - 30 VAC or 10.5 - 30 VDC
Codes: 256 (set by dip switches)
RF frequency: 310 MHz

.......more details

Programming Instructions

219109

Capacitor 1/3 HP 43-53 MFD 250V

For LDO33 only

4010-12FT

Aluminum Retainer only for Light Brush 12' Long 180 degree

For angle application (180 degree)
For use with Light Brush or Vinyl Insert

4007-8FT

Aluminum Retainer only for Light Brush 90 degree

For angle application
For use with Light Brush or Vinyl Insert.

4002-12FT

45 Degree Aluminum Retainer for Light Brush 12' Long 45 degree

For angle application (45 degree)
For use with Light Brush or Vinyl Insert.

1016-ADHESIVE

Adhesive for Storm Shield 6oz tube

For use with 1016

Safety data sheet

1008-1-3/8"

Bottom Nail-On for Wood Door Light Duty per foot

For 1-3/8" doors.
Color: Black

1006-1-1/2-8'

Rigid Vinyl Bottom Retainer U-Shaped 8' Long

Black with flexible fin to touch door face.
For door thickness 1-1/2"

1104-18FT-DK-BN

Residential Side & Top PVC Weather-Strip with cap 18' Long - Commercial Brown (DN)

Commercial brown rigid vinyl retainer with commercial brown flexible vinyl seal.
Dual fin vinyl.
Comes with cap to hide screws.
Full case quantity only (12).

RP-3002

Rubber Plug 1/2"

To plug end of 3002 gum hose

7001-18-WHITE

Commercial Side & Top Weather-Strip 18' Long - White (W)

White galvanized steel with white dual fin vinyl.
Commercial and Residential use.
Steel is notched on both ends for easier installation.

7001-14-WHITE

Commercial Side & Top Weather-Strip 14' Long - White (W)

White galvanized steel with white dual fin vinyl.
Commercial and Residential use.
Steel is notched on both ends for easier installation.

1102-18-BLACK

Commercial Side & Top Weather-Strip 18' Long - Black

Aluminum retainer with black heavy-duty dual fin vinyl.

32-48-200

Extension Spring 8' Door - 200 lbs Tan ** Replaced by 27-48-200

Double - Loop
32" long 48" stretch 200 lb load
Springs sold individually

Spec Sheet

25-42-240

Extension Spring 7' Door - 240 lbs Blue w/ clip

Double - Loop end for strength
25" long 42" stretch 240 lb load
Sold individually
Rated for 10000 cycles

Spec Sheet

25-42-90

Extension Spring 7' Door - 90 lbs Light Blue

Double - Loop
25" long 42" stretch 90 lb load
Sold individually
Same as part number 109
Rated for 10000 cycles

Spec Sheet

25-42-110

Extension Spring 7' Door - 110 lbs White

Double - Loop
25" long 42" stretch 110 lb load
Sold individually
Rated for 10000 cycles

Spec Sheet

28-32081

Truck Door 2" Horizontal Track with 8" Radius 120" Roadside (LH) for Whiting Roll-Up Doors

SPECS: Length: 120" Fits door sizes: Greater than 96" high
Cross Reference: W #11-3
Galvanized steel 14 gauge construction
Tongue and groove for proper alignment at joints
8" radius
For use with 2" diameter steel or nylon rollers

.......more details

28-02090

Truck Door 2" Vert. Track and Right Angle Assembly 96.5" Roadside (LH) for Whiting Roll-Up Doors

SPECS: Length: 96.5" Fits door sizes: 72" - 90" high
Assembly includes: Right angle mounting track Vertical track and Torsion bracket
Cross Reference: W #2275-2
Galvanized steel 14 gauge construction
Tongue and groove for proper alignment at joints

27-20200

Truck Door Winding Plug for Todco Roll-Up Doors

Cast aluminum construction.
Provides easy method to adjusting spring tension.
Cross Reference: T #59158 T #51041 W #4050 340100

26-40027

Truck Door Bottom Seal 98" Long for Whiting Dryfreight Doors

Flexible PVC material
Cross Reference: W #1676

H11G11

Hinge #11 x 11 gauge

11 gauge # 11 hinge - 0.93 lbs
Bright zinc-plated steel construction
For use with 7/16" stem rollers

25-10300

Truck Door Cable Anchor Bracket Zinc

Steel construction Zinc plated finish
Allows proper rotation of cable head
Cross Reference: T #61204 W #4004 240000

CUSTOM4X8PO

Devanco Loop 4'x8' rigid-pvc pave-over

Ideal for use on with gravel driveways or sufaces that are to be asphalted
Features a twisted lead-in to reduce the chances of interference and false detections.
Direct burial loops should be buried approximately 6" deep