Devanco Canada - Get The Right Garage Door Opener‎ and Parts

CP-MO-12-123/1

Lynx Electric Motor 1/2 HP 230V 1 Ph

Electric motor only

MYQ-SGC1WLM

LiftMaster Smart Garage Camera ***No Longer Available

The LiftMaster Smart Garage Camera™ is compatible with all myQ connected garage door openers.
It works directly with all LiftMaster openers with the Wi-Fi logo and can work with most garage door opener brands manufactured after 1993 when paired with the myQ Smart Garage™ Hub(821LMB).
myQ Connected: monitor the garage through a live feed or recorded event using the myQ app.
Video camera begins recording when motion is detected.
Easy setup with Bluetooth and magnetic mounting base.
Enables secure in-garage delivery for Amazon Prime packages

.......more details

LMPK3-ST

LiftMaster HID ProxKey III 1346 Key Fob Price Per Fob

HID 26 Bit Format
125 kHz
Sold in Lots of 100 - Price Shown is Price per Card
Small enough to fit on a key ring
Universal compatibility with HID proximity card readers
Provides an external number for easy identification and control

.......more details

VERMONT-R16

Garex Ready to Install Door Special Order

R16 Insulation - Short Panel with vertical lines carriage style - Panel spacing does not allow for decorative handles - Decorative hinges can be used - Available in steel (std colours) or aluminum (white and grey) - A variety of decorative windows can be added - Custom colours can be factory painted - Multiple hardware configurations are available to accomodate site requirements - Composite end blocks eliminates corrosion and wood deterioration

PREM-SEL-MX-R16

Garex Ready to Install Door Special Order Premium Select MX R16

R16 Insulation - Mix of short and long panels - Available in steel (std colours) or aluminum (white and grey) - A variety of decorative windows can be added - Custom colours can be factory painted - Multiple hardware configurations are available to accomodate site requirements - 7' to 9' wide doors will have 1 short and 1 long embossment - 10' to 11' wide doors will have 2 short and 1 long embossment - 12' to 18' wide doors will have 2 short and 2 long embossments - Composite end blocks eliminates corrosion and wood deterioation

IRB-SH-SET

EMX Industries Steel Protective Hoods Only Grey Powder Coat Pair

Includes 2 hoods
Powder-coated steel construction
Compatible with EMX IRB-MON EMX IRB-4X safety photo beam sensors
Each hood fits easily over gate/garage door opener sensor

CABLE-NR-14-GALV

Cable No Roll 1/4" 19x7 Galvanized 500ft

19X7 rotation-resistant wire rope.

41A5807

LiftMaster Chain and Cable Kit 7' Door

This is a one piece 7 ft. Chain and Cable Replacement Kit

MX00218

Micanan Clutch Shaft Assembly for PRO-LH

10RD900

BEA Receiver Module 900 MHz

Long range receiver to allow for wireless activation of any door control.
Provides greater line of sight transmission distance than legacy wireless frequencies along with providing better penetration of obstacles.
Voltage: 12 – 24 VAC / VDC
Operating temperature: -10 to 55C

Product guide

ALUM-536

Aluminum 24" x 100' Spool Dover Gray / Gris Granite # 536

20% thicker than the aluminum sold in retail stores (0.022" )
Gentek # 536
Reverse side is #431 Bright White

Colour chart

50060

Doorlec Explosion-Proof Pneumatic Edge Kit

Kit includes explosion-proof air switch air hose plugs coil cord & fittings
Door size needs to be specified when ordering

ME123-2M-BLK-LH

Miller Edge Black LH 2-Wire Monitored 2" wide x 1-1/2" high Sold by the Foot

Electromechanical slide in edge for sectional doors and sliding gates.
Touch sensitive singaling allows for immediate stopping and reversing of motion
Temperature range: -30F to 155F
Lead wire: 22 gauge universal
Sensitivity: nominal 6-8 PSI
2 wire NO configuration

.......more details

Worksheet Installation manual Sell sheet

NICE-OVIEW

NICE Oview Display Programmer

�
Type: control programming and diagnostics unit for devices equipped with BusT4 connector
Technology adopted: half duplex 19200 Bps serial connection on differential bus for delivery of commands modification or parameters and monitoring of diagnostic data
Maximum number of hourly commands: 64
Event log: storage capacity of 400 events
Operating temperature: from –20°C to +55°C • Dimensions (mm): 107 x 61 x h 20 (with wall-mounting support: 125 x 70 x h 32)

.......more details

XBA15

NICE Aluminum Bar with 3M White Paint 69mm x 92mm x 3150mm

VS-GSLG-723

Linear Industrial Duty Variable Speed Slide Gate Op. 2 HP 230V 3 PH

Up to 24" per second gate speed
Max gate length: 100 ft
Max gate weight: 4000 lbs
Integral APeX Controller
Soft start/soft stop
Programmable speed control

.......more details

Installation manual Spec sheet

144B18

LiftMaster Idler Pulley 2" OD 1/2" Bore

144B0018 is a idler pulley (2"OD 1/2"B) replacement kit. Compatible with Models ATS211 & ATS211R garage door openers. Check the manual for your specific model number before ordering.
Also known as: 144B0018 144B18

41D9276

LiftMaster End Panel Logic Board

041D9276 is a End Panel for Receiver Logic Board with LED Light Connector Replacement Kit.
For use with LiftMaster® and Chamberlain® Garage Door Openers Powered by myQ®; manufactured after 2018
Compatible with WLED model

25-60006

Truck Door T-Style Replacement Hardware Pkg Set**To Extent of Inventory

Package set consists of (2) 1" door rollers (2) T-style end hinges (2) T-style center hinges and 16 nuts 16 washers & 16 bolts
Zinc plated

RADIO-EM901

Manaras 1-btn Mini Transmitter 313 MHz

Open/Close mini remote for 1 door
Comes with LED battery life indicator
Mini 12V battery included
Key chain holder included
Replaces RADIO-28
10-dip switches

.......more details

Manual Programming Instructions

2520-437-BT-YELLW

Linear Token Acceptor Yellow 12" x 10" Locked Outdoor Encloser

Available in Black White or Yellow
Stand not included

.393-514-R-C

Cut-to-Length Torsion Spring .393 x 5-1/4" Right Hand Wound Coated ** Price by Quote Only

Priced per inch - cones & filler sold seperately
For factory installed cones use part no. C-514-INSTALLED

SG-13-NO

Telco Light Curtain with Rectifier Normally Open 72" (13-193-028-D1-E-H58-5) ***No Longer Available

Normally Open
SGR13-193-028-D1-E-HS8-5
SGT13-193-028-D1-E-01-15
1928mm housing 1800mm active height 28 channels NO relay output 15m cable

Specification sheet Wiring diagram

PRO-HB-7553U-LH

Micanan 3/4HP 575V 3P Hoist Op. with Brake N1 Eyes Monitored ECB Left Hand

Continuous duty belt drive jackshaft operator with emergency chain hoist
Full function Smart 10.0 Logic control board featuring on-board receiver with antenna
Nema 1 photoeyes included
Solenoid brake included

RADIO-RE900

Manaras 1-Channel 24V Receiver Fixed Code Dip-Switch 313 MHz ** Replaced by RADIO-RE901

Commercial receiver controls one (1) operator (door)
Pairs with an infinite number of identical transmitters
practical learn button on front surface
Nema 1 enclosure
Retrofits to older generation fixed code Manaras transmitters and receivers. No need to change other devices
Compatible with most commercial operator brands on the market

.......more details

Manual

PRO-H-5053-E-RH

Micanan 1/2HP 575V 3P Hoist Operator NM ECB No Eyes Right Hand

Continuous duty belt drive jackshaft operator with emergency chain hoist
Full function Smart 10.0 Logic control board featuring on-board receiver with antenna
Solenoid brake OPTIONAL
Non-monitored board NO photoeyes

PRO-H-5023-U-LH

Micanan 1/2HP 230V 3P Hoist Operator N1 Eyes Monitored ECB Left Hand

Continuous duty belt drive jackshaft operator with emergency chain hoist
Full function Smart 10.0 Logic control board featuring on-board receiver with antenna
Nema 1 photoeyes included
Solenoid brake OPTIONAL
On-Board receiver holds up to 20 transmitters

K71-D3PH

LiftMaster Drum Brake Kit 3 Ph 208/230/460V (Late Model Logic 5 Shoe and Drum Models)

Internal Solenoid Drum Brake with Cable Replacement Kit.
Compatible with LiftMaster® Logic 5.0 Model T SD J H and HJ Industrial-Duty Operators.
Complete service kit includes: Solenoid Cover Brake Solenoid Brake Drum Cable Mounting Plate and Installation Hardware.
Quiet preferred sound profile
Industry benchmark stopping performance with adjustability
Significantly reduced modes of failure

.......more details

Installation manual Manuel d'installation

PRO-J-10043-U-LH

Micanan 1HP 460V 3P Jackshaft Monitored ECB N1 Eyes Left Hand

On board receiver with antenna
Continuous duty industrial motor with overload protection
Heavy duty 5L V-belt
Adjustable friction clutch
Solenoid brake (optional PRO-JB) recommended for large doors
3/4" permanently lubricated & sealed precision ball bearings on pulley shaft

.......more details

Specification Sheet

ALUM-509

Aluminum 24" x 100' Spool Midnight Surf / Vagues de Minuit # 509

20% thicker than the aluminum sold in retail stores (0.022" )
Gentek # 509
Reverse side is #431 Bright White

Colour chart

PRO-J-10083-U-RH

Micanan 1HP 208V 3P Jackshaft Monitored ECB N1 Eyes Right Hand

On board receiver with antenna
Continuous duty industrial motor with overload protection
Heavy duty 5L V-belt
Adjustable friction clutch
Solenoid brake (optional PRO-JB) recommended for large doors
3/4" permanently lubricated & sealed precision ball bearings on pulley shaft

.......more details

Pro J Manual Specification Sheet

.331-258-R

Cut-to-Length Torsion Spring .331 x 2-5/8" Right Hand Wound Red/White

Priced per inch - cones sold seperately
For factory installed cones use part no. C-258-INSTALLED

.312-514-R

Cut-to-Length Torsion Spring .312 x 5-1/4" Right Hand Wound Yellow

Priced per inch - cones sold seperately
For factory installed cones use part no. C-514-INSTALLED

2X4PO50

Devanco Loop 2' x 4' pave-over 50' lead-in

Ideal for use on with gravel driveways or surfaces that are to be asphalted
Features a twisted lead-in to reduce the chances of interference and false detections.
Direct burial loops should be buried approximately 6" deep

42GRR-AB

Allen Bradley Thru-Beam Photocell RX/TX Long Range 42GRR9001+GRL9040

.273-258-R

Cut-to-Length Torsion Spring .273 x 2-5/8" Right Hand Wound Orange/Red

Priced per inch - cones sold seperately
For factory installed cones use part no. C-258-INSTALLED

STEELCRAFT_PANEL_SEAL

Steelcraft Intermediate Section Seal V-Bead Sold by the Foot

STATION080

Manaras 3-btn Push-Button Control Station with Key Lock-Out and Pilot Light Nema 4/12

2 N/O contacts and 1 N/C contact for stop.
Surface mount.
Schneider Elect. part no. XALD04H7

MD-00246

Double Sprocket 41B14 / 41A32 with 1" Bushing

Double sprocket for PRO-H/HB

PRO-PL-10053-E

Micanan Wall Mount Control Panel 1HP 575V Non-Monitored ECB

Standard features include: N-4/12 12" x 10" x 6" panel B-2 C-2 D1 E2 T TS Mid-stop control functions Time delay on reverse On-board radio receiver hinged cover backplate primary fuses in panel
If PBS on cover required an additional charge will apply
If panel not ordered with an operator an additional charge will apply

BINS-SANDSTONE

Utility Bin Heavy-Duty Stackable Sandstone *** No Longer Available

Usable in virtually every environment both indoor and outdoor and they are made from Polypropylene which will not fade in the sun
Outside dimensions: 16.75" L x 10.75" W x 6.55" H
Inside dimensions: 12.15" L x 8.375" W x 6.5" H
Sold per bin

IRB-RET-HD

EMX Industries Steel Protective Hoods Only Black Fits Old Style IRB-RET Only

Protective Hoods for the Universal Retro-Reflective Monitored Photo Eye System (Item #IRB-RET) by EMX
Easily installed using the existing mounting holes of the Photo Eye
Constructed of zinc plated steel
Black powder-coated finish
Will NOT fit the new IRB-RET UL325-2018 units

ALUM-556

Aluminum 24" x 100' Spool Forest Green / Vert Foret # 556

20% thicker than the aluminum sold in retail stores (0.022" )
Gentek # 559
Reverse side is #431 Bright White

Colour chart

FMB01DW24

Timer Multifunction 11-Pin

Carlo Gavazzi multi-function timer
Time range 0.05 s to 300 h
Knob selection of time range
Knob adjustable time setting
Knob selection of operating mode (6 functions): A - delay on operate B - symmetrical recycler OFF first B2 - symmetrical recycler ON first C - signal ON/OFF delay D - delay on release E - interval
Manual start

.......more details

PRO-J-5083-U

Micanan 1/2HP 208V 3P Jackshaft Monitored ECB N1 Eyes Universal Mount

On board receiver with antenna
Continuous duty industrial motor with overload protection
Heavy duty 5L V-belt
Adjustable friction clutch
Solenoid brake (optional PRO-JB) recommended for large doors
3/4" permanently lubricated & sealed precision ball bearings on pulley shaft

.......more details

Specification Sheet

27089A

Genie Washer

Drive shaft washer for PMX500

.393-514-L

Cut-to-Length Torsion Spring .393 x 5-1/4" Left Hand Wound Orange

Priced per inch - cones & filler sold seperately
For factory installed cones use part no. C-514-INSTALLED

5001-7-WHITE

Residential Side & Top Weather-Strip 7' Long - White

Painted aluminum retainer with flexible dual fin vinyl.
Residential use.

RADIO-RE102

Manaras Access Radio Receiver Rolling Code 390 MHz

Designed for multiple access communities and commercial buildings.
Compatible with up to 1000 remote controls per receiver.
Compatible with RADIO-EM101 and RADIO-EM103 SD/MD and KEYLESS042.
Each transmitter can be individually added deleted or temporarily disabled.
12-24VDC or 12-24VAC.

Programming instructions Instructions de programmation

MP-00039

Micanan High Cycle Mod. for PRO-TTB

Modification only
For installations that exceed 100 door cycles per day
Includes cast iron flanged precision bearings on all shaft and delay on reverse circuit
Supplied with #41 chain

16-8002

LiftMaster Cogged Vbelt 4L330

Fits BG790 barrier gate opener

K1D8284-1CC

LiftMaster Main Drive Board 1 Ph (SL585U SL595U)

BD3240

Piezo Warning Buzzer Alarm with Volume Control 24VAC/DC

2-1/2" long 90 DBA

RS3346

Roller 3" Steel 3/4" Shaft 5.8" stem Heavy-Duty 6203 Bearing

Steel Roller Wheel diameter: 3" 5.8" Stem Overall length: 7"
Heavy-duty 3/4" shaft supporting higher weight load applications

10-1036-4

Whiting 2" Nylon Roller 5" Stainless Steel Shaft for Truck Doors

A Whiting original part
Stainless steel bearings stainless steel shaft

PIVIN-BCSI-BASE

Base Only for BCSI Gate Operator

25-10105

Truck Door 1" Steel Roller 3.25" Shaft Length for Todco Roll-Up Doors

Zinc plated Hardened shaft and raceways
Seven roller ball design

25-10109

Truck Door 1" Steel Roller 5" Shaft Length for Todco Roll-Up Doors ** NLA

Zinc plated Hardened shaft and raceways
Seven roller ball design

PRO-HB-5011U-LH

Micanan 1/2HP 115V 1P Hoist Op. with Brake N1 Eyes Monitored ECB Left Hand

Continuous duty belt drive jackshaft operator with emergency chain hoist
Full function Smart 10.0 Logic control board featuring on-board receiver with antenna
Nema 1 photoeyes included
Solenoid brake included
On-Board receiver holds up to 20 transmitters

Installation manual Specification sheet

TRACK-2"-RAW-9

Raw Vertical Track 2" 9'-0" Sold per Piece

MX00137

Micanan PRO-APT Trolley Carriage with Auto Re-Engage Feature (MX00171) *** NLA

New part number is MX00171

LMTBU

LiftMaster Monitored Through Beam Photo Eye Nema 4X ** To exent of inventory

Meets 2016 UL 325 requirements
Long Range powerful beam provides reliable performance.
Sensing distance up to 90 ft.
Anti-Fogging Lens
NEMA 4X rated
Wireless network mode eliminates the need to wire between operators in dual-gate applications.

.......more details

110925

Allstar MVP-QC 3-Btn Quick Code Transmitter 318 MHz *** Discontinued

Compatible with all MVP receivers and operators
Quik-code programming no dip switches
Operate LED
Visor clip included
Power: Two 2032 batteries
Codes: 19683

.......more details

Programming instructions

M-VERSION-N4

Manaras Monitored Entrapment Protection Option Upgrade Mont + N4/12 Eyes

Upgrades added when purchasing a commercial operator

CP-CONT-SCHNEIR

Contactor Schneider 24V

Works on Lynx MCJH
Same as LC2 K12107B7 & MK00108
replace Riken Contactor

CR-2154

Raynor Replacement Photocells *** Discontinued

The original PEC-R3 Sensors manufactured by Raynor are no longer available.
The CR-2154 Sensors are the only sensors currently available to replace the original PEC-R3 Sensors.
Includes both the Emitter and Receiver sensors
Includes new sensor mounting brackets. Wires are not included.
These sensors are slightly different and will not mount to the original PEC-R3 sensor brackets.
The new CR-2154 Sensors require new mounting brackets (included) to be installed

.......more details

RBH101L5-LH

LiftMaster 1 HP 115/230 VAC 1 PH Commercial Hoist Operator Logic 5

H-style operators include a floor level chain hoist to ease manual operation in an emergency or power outage.
The operators are typically mounted to the wall when used with larger sectional overhead doors with vertical or high lift and mounted to the wall or the front of the hood when used with rolling doors and grilles.
H operators are attached to the door jackshaft to indirectly drive the door.
With the addition of the 828LM MyQ technology enables the user to monitor and control their operator and light with their smartphone tablet or computer.
Alerts can be received as email or pop-up (push) notifications on a mobile device ensuring the status of your commercial door.
Security+ 2.0™ safeguards your facility – with every click a new code is sent to the commercial door operator so the door opens only for you.

.......more details

Installation manual Manuel d'installation Sell sheet

MK-00697

Micanan Fraba FOS-1 Exterior Thru-Beam Photocell Nema 4 / 4X 45ft Range

Exterior Through-Beam Photocell
Sensing Distance 45 Feet
UL325/2010 Recognized Component
Comes with Sender Receiver and Brackets
NEMA 4 & 4X

Installation manual

ALUM-525

Aluminum 24" x 100' Spool Black / Noir # 525

20% thicker than the aluminum sold in retail stores (0.022" )
Gentek # 525
Reverse side is #431 Bright White

Colour chart

36451A

Genie Front Idler Assembly 36451A.S *** NLA

Works on ReliaG 800 2022 2024 2042 ReliaG 600 ChainLift BeltLift 1022 1024 and 1042 Series Units

ME123-M-YEL-U

Miller Edge Yellow Universal 4-Wire Monitored 2" wide x 1-1/2" high Sold by the Foot

Electromechanical slide in edge for sectional doors and sliding gates.
Touch sensitive singaling allows for immediate stopping and reversing of motion
Temperature range: -30F to 155F
Lead wire: 22 gauge universal
Sensitivity: nominal 6-8 PSI
2 wire NO configuration

.......more details

Worksheet Installation manual Sell sheet

K72-33873

LiftMaster Output Shaft Kit MT / BMT

Complete kit includes output shaft bearings sprockets chain roll pin and turac

MK-00011

Micanan Radio Control Terminal Strip

MG00021

Micanan Flat Washer 7/8" ID x 1-1/8" OD

12-10882

LiftMaster Copper Bushing

3/4" x 1" x 5/8"

108D34

LiftMaster Light Lens K108D0034

Compatible with models 1270 1280 1280R
Fits older chain drive models with 2 lights: 1250 1265 320WD 1260LK 220WD 1260LK 220WD 1355

D525-54-HL

Cable Drum High Lift 54" D525-54HL Torque Force Pair

Maximum hi-lift: 54"
Capacity: 500 lbs per drum
Max. cable size: 3/16"
Cable length: Floor to shaft center 66" minus amount of Hi-Lift
Cross reference: DNS 54 OMI 54HL M134-1375

3BXT

Control Station Exterior Surface Mount O/C/S N4 Non-Metallic

Double pole contacts
H=5-3/4" W=2-3/4" D=2-1/2"
UL Listed CSA Approved

UCP207-20

Precision Pillow Block Bearing 1-1/4" Bore

6-9/16" overall length
5" hole center to center distance

.295-334-R

Cut-to-Length Torsion Spring .295 x 3-3/4" Right Hand Wound Blue

Priced per inch
For factory installed cones priced seperately - use part no. C-375-INSTALLED

.295-258-R

Cut-to-Length Torsion Spring .295 x 2-5/8" Right Hand Wound Blue

Priced per inch
For factory installed cones priced seperately - use part no. C-258-INSTALLED

HDC-411-LH-CONT

Lynx Ind. Jackshaft with Hoist 3/4Hp 115V Contactor Left Hand

1/2 3/4 1HP 115-230-460 or 575V single or three phase motor capacitor start overload and under voltage protection.
Solid state circuit board Lynx-6000. Built in 1.5 second delay.
5L V-belt primary reduction #50 drive chain and sprockets.
Adjustable friction clutch magnetic solenoid brake.
Precision pillow block bearings on output shaft.
Fully driven adjustable limit switches.

.......more details

Sell Sheet

MK00701

Micanan Smart 10.0 Full Feature Circuit Board Monitored with Heavy Duty Relays

For 1 HP 110/220V Single Phase 230/380/460V 3 Ph
The board has P1 & P2 terminals

Instructions Manual

PEDALU42-HOOD

Aluminum Hood Only No Post for PEDALU42

Hood only No post
High quality aluminum
Boitier pied estau seulement en aluminum

Shop drawing

H12G07-SS

Hinge #7 x 12 gauge Stainless Steel

Manufactured with 12ga. Rust-Resistant Stainless Steel
Universal Design
Fits Most Overhead Sectional Doors
Priced Per Each

4X3PO50

Devanco Loop 4' x 3' pave-over 50' lead-in

Ideal for use on with gravel driveways or surfaces that are to be asphalted
Features a twisted lead-in to reduce the chances of interference and false detections.
Direct burial loops should be buried approximately 6" deep

Installation Instructions Instructions d'installation Spec Sheet Brochure Loop Placement Guide Guide de positionnement des boucles

DR2

Linear 2-Channel Delta3 Receiver 310 MHz *** NLA

Activates two devices
Wire lead antenna
12 and 24 Volt models
Two-channel wireless radio control designed for use with automatic garage/gate operators and access control systems.
The receiver can be activated by any of the Delta-3 format transmitters
Mounting bracket supplied

.......more details

Installation Manual

11-10987

LiftMaster Clutch Shaft for MH

PRO-LH-5011U-LH

Micanan 1/2HP 115V 1P Medium-Duty Jackshaft N1 Eyes Monitored ECB Left Hand

Designed for use on commercial sectional doors with high or vertical lift
May also be used on small rolling grilles with max. 15 cycles per hour
Includes chain hoist
Includes solenoid brake
On board 372 MHz receiver with antenna
On-Board receiver holds up to 20 transmitters

.......more details

Installation manual Specification sheet

271723

Rolling Steel Slide Bolts for Bottom Bar 679

2KW

Rolling Steel 2" Curved Continuous Windlock

Windlocks are especially used on rolling steel doors and shutters to prevent "blow-ins" from severe storms or winds.
A wind lock is a small metal device that is attached to each slat.
Its primary function is to reduce the amount of friction that occurs between the actual door & the guiding panel.
When the wind is strong the roller door may be dislodged bent or misaligned from the guide.
With a windlock your door can operate efficiently despite wind load or pressure.
Windlocks are easy to add on to any existing rolling steel or shutter door

.......more details

2JW-D064

Rolling Steel 2" Curved Cast Windlock

Windlocks are especially used on rolling steel doors and shutters to prevent "blow-ins" from severe storms or winds.
A wind lock is a small metal device that is attached to each slat.
Its primary function is to reduce the amount of friction that occurs between the actual door & the guiding panel.
When the wind is strong the roller door may be dislodged bent or misaligned from the guide.
With a windlock your door can operate efficiently despite wind load or pressure.
Windlocks are easy to add on to any existing rolling steel or shutter door

.......more details