Devanco Canada

 
User Name:
Password:
Remember Me:
Forgot your password
Request a Login
Home
801-300-001-01

Equinoxe Long Range Receiver 1-Door 433 MHz New Generation

  • 1000 ft range
  • 2016 +
  • This receiver will accept 8 equinoxe O/C/S remotes
Programming InstructionsInstructions de programmation
MG020-Y-2E-04

Miller Edge Sensing Edge Yellow 2-Wire End Outlet 4ft Long

  • Electromechanical slide in edge with a small profile for motorized gates and doors rolling shutters and pinch point protection applications.
  • Touch sensitive signaling
  • Temperature range: -30F to 155F
  • Lead wire: 18 gauge 2ft length
  • Sensitivity: nominal 4 PSI
  • 2 wire NO configuration
    • .......more details
OPH-6114-ECB

Manaras Opera-H 1 HP 120V 1Ph with Electronic Circuit Board

  • A heavy-duty industrial jackshaft operator
  • For use on Standard High and Vertical Lift sectional doors
  • Can also be used on Rolling doors and Grilles
  • Comes with a self-engaging chain hoist for manual operation
  • Clearence: side room required 15"
Installation ManualSell Sheet
OPJ-6213-ECB

Manaras Heavy-Duty Jackshaft Operator 3/4 HP 240V 1 Ph with Elect Circuit Board

  • An industrial operator designed for use on standard high and vertical lift sectional doors
  • Can also be used on rolling doors and grills
  • It incorporates a floor level disconnect mechanism for manual operation
  • 25 cycles per hour 100 cycles per day
  • Continuous-duty single phase capacitor start or 3 phase motor open drip proof
  • Mechanical brake
    • .......more details
Installation ManualSell Sheet
T101L5

LiftMaster 1 HP 115/230V 1P Commercial Trolley Operator Logic 5

  • Trolley low profile with brake
  • Suspended from the ceiling the operators are used on sectional overhead doors with standard lift.
  • T operators are directly attached to drive and control the door.
  • MyQ® Technology enables you to securely monitor and control your facility operator and lights with your smartphone tablet or computer for greater peace of mind.
  • Security+ 2.0â„¢ safeguards your facility – with every click a new code is sent to the commercial door operator so the door opens only for you.
Installation ManualManuel d'InstallationSell sheetBrochure
16-5L300

LiftMaster Cogged Vbelt 5L 30"

OPJ-6232-ECB

Manaras Heavy-Duty Jackshaft Operator 1/2 HP 208V 3 Ph with Elect Circuit Board

  • An industrial operator designed for use on standard high and vertical lift sectional doors
  • Can also be used on rolling doors and grills
  • It incorporates a floor level disconnect mechanism for manual operation
  • 25 cycles per hour 100 cycles per day
  • Continuous-duty single phase capacitor start or 3 phase motor open drip proof
  • Mechanical brake
    • .......more details
Installation ManualSell Sheet
124772

Roller 3" UHMW Plastic 7-1/4" Stem Sealed Bearing

Z9220

Pocket Style Res / Com Combo Spring Gauge

  • Includes wire sizes .1875 thru .5
  • Double saw-tooth leaves for easy wire measuring
  • Stainless steel
  • Includes belt sheath
19988A

Genie Motor Start Capacitor 220V 70MFD (37954R)

  • Compatible with most Genie 1/2 HP model garage door openers
  • Same as part # 37954R.S
104100

FAAC Hydraulic Swing-Leaf Gate Operator S450H 24VDC

  • Hydraulic operator for residential and condominium swing gates with single-leaf max width of 3 m (SB) and 2 m (CBAC).
804

Fasteners Sleeve Anchor 3/8" x 4" 50/Box

  • Secure anchoring into concrete brick or block
803

Fasteners Sleeve Anchor 3/8" x 3" 50/Box

  • Secure anchoring into concrete brick or block
801

Fasteners Sleeve Anchor 5/16" x 1-1/2" 100/Box

  • Secure anchoring into concrete brick or block
GHX-6112-CONT-L

Manaras Explosion Proof Gear Head 1/2HP 120V Contactor Left Hand

  • Nema 7/9 control box
  • Electrical connections from motor to control box consists of hazardous location certified fittings and NEMA 7/9 O/C/S push-button station
Installation ManualSell Sheet
MX00140-110V

Micanan Brake Assembly for PRO-TB/APTB with 110V Solenoid Outside - New Model ** DISCONTINUED

18007

Doorlec Reducer BHC-63 5/8' or 7/8" Input

  • Gearbox for GH operator
LA500DCS

LiftMaster Secondary 24VDC Actuator Arm for Dual Swing Gate Applications New Model

  • Includes 40ft cable and junction box
Installation ManualManuel d'installationSell Sheet
109099

LiftMaster Flat Wall Plate Mounting Bracket

  • Heavy 1/4" steel plate bracket used for wall mounting of side-mount operators.
  • Slots in back allow for tensioning of drive chain.
  • Mouting studs match up with mounting holes of LiftMaster Models DJ DH J MGJ H and GH operators.
ME00028

Micanan Input Shaft Heavy-Duty

.343-6-L

Cut-to-Length Torsion Spring .343 x 6" Left Hand Wound Blue/Red

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-600-INSTALLED
BT505L5

LiftMaster 1/2 HP 575V 3p Commercial Trolley Operator with a Brake Logic 5

  • Low profile trolley operator with brake installed
  • Comes with #48 roller chain
Installation ManualManuel d'InstallationSell sheetBrochure
771

Fasteners Lag Screw Hex Washer High Profile 5/16" x 1-3/4" 1000/Box *** Discontinued

  • 7/16" head
778

Fasteners Hex Head Bolt Gr 5 5/16-18 x 1"1000/Box

  • 5/16" bolt has 1/2" head
  • Max torque = 12
  • Full thread
  • Grade 5
764

Fasteners Serrated Flange Nut 5/16-18 1000/Box

CBS-338

Center Bearing Support 3-3/8" 8-gauge with Bearing Sold per Piece

  • Heavier gauge allows for use in both 2" commercial or 3" industrial applications
  • Sold per piece
  • For 1" shaft
  • Double clipped ends
RBH501L5-RH

LiftMaster 1/2 HP 115/230 VAC 1 PH Commercial Hoist Operator Logic 5

  • With the addition of the 828LM MyQ technology enables the user to monitor and control their operator and light with their smartphone tablet or computer.
  • Alerts can be received as email or pop-up (push) notifications on a mobile device ensuring the status of your commercial door.
  • Security+ 2.0â„¢ safeguards your facility – with every click a new code is sent to the commercial door operator so the door opens only for you.
  • Brake standard on all RBH operators
  • #48 chain #50 output sprocket chain
  • Box does not include spreader
    • .......more details
Installation ManualManuel d'InstallationSell sheet
41A5389-1E

LiftMaster Receiver Logic Board

  • For low profile screw drive models with one light
  • Fits models 2110 2220
Replacement Instructions
PRO-GHX-5011-LH

Micanan Explosion Proof Gearhead 1/2HP 115V with Intrinsically Safe Package & Banner Photoeyes

  • Intrinsically safe package MK-00157 included on operator
  • N7/N9 explosion proof modification included on operator
  • Left-hand mounting
  • On-Board receiver holds up to 20 transmitters
Installation ManualSpecification sheetShop Drawing
114

Lag Screw Hex Washer Head 1/4" x 1-1/4" 1000/Box

  • 7/16" head
  • Serrated
MT22-YELLOW-LH

Miller Edge 2-Wire Pressure Sensitive Edge Sold per Foot

  • €¢Electromechanical small profile edge for rolling steel foor applicaton. •Touch sensitive signaling allows for immediate stopping or reversing of motion. •The MT22 is completely flexible and will contour to curved surfaces. The MT22 also acts as weatherstrip. •Lead wire: 22 gauge universal •Sensitivity: nominal 6-8 PSI •2 wire NO configuration •Horizontal mount •ANSI/UL325 recognized component •One year warranty
Installation ManualWorksheetSell Sheet
T501L5

LiftMaster 1/2HP 115/230 Volt 1Ph Commercial Trolley Operator ***NLA

  • New Logic 5
  • Suspended from the ceiling the operators are used on sectional overhead doors with standard lift.
  • T operators are directly attached to drive and control the door.
  • MyQ® Technology enables you to securely monitor and control your facility operator and lights with your smartphone tablet or computer for greater peace of mind.
  • Alerts can be received as email or pop-up (push) notifications on a mobile device ensuring the status of your commercial door.
  • MyQ Mobile App is a free download with no annual activation fee.
    • .......more details
Installation ManualManuel d'InstallationSell sheetBrochure
DR-312

Linear 1-Channel Delta3 Receiver 312 MHz - DISCONTINUED

  • 312 MHz frequency 8 dip switches for coding 256 possible codes
  • 24V AC/DC input power 3 terminal connection
  • Activates one device
  • Dimensions: 5.5" W x 4" H x 1.25" D
  • Same as: DNR00001
Programming Instructions
7001-16-SANDSTN

Commercial Side & Top Weather-Strip 16' Long - Sandstone (D)

  • Sandstone galvanized steel with sandstone dual fin vinyl.
  • Commercial and Residential use.
  • Steel is notched on both ends for easier installation.
  • Also known as Taupe
  • Full case quantity only (10)
753

Fasteners Self Drill & Tap Tek Screw 1/4-20 x 1" (#3PT) 1000/Box

  • Indented Hex Washer Head
  • 7/16" Head
  • Max RPM = 2000
  • #3 point = long cutting edge (less thread)
94-61180-33-84

Truck Door 2" Steel Roller 6" Stem for Whiting Roll-Up Doors

  • open-bearing roller
1104-10FT-CHARC

Residential Side & Top PVC Weather-Strip with cap 10' Long - Charcoal (H)

  • Charcoal rigid vinyl retainer with charcoal flexible vinyl seal.
  • Dual fin vinyl.
  • Comes with cap to hide screws.
PULLEY014

Manaras Motor Pulley Standard 2" x 5/8" 5L/B

G90-503000

LiftMaster Non-Resettable Counter 24VAC (50-12862)

  • Increases one number each time current is applied
  • Connects to the 24 volts of contactor coil
  • Simple 2-wire connection
  • Same as 50-12862
TLS1CARD

LiftMaster Option Board for L4 L5

  • Works in conjunction with Logic 4 & Logic 5 to provide seven field-selectable modifications
  • Including six door traffic control options
  • A means to connect External Open & Close limits by using a selectable DIP switch
  • Controls both 24V & 110V traffic lights
  • Formally known as RDGRNCARD
Installation Manual
25E10232

Truck Door Mounting Plate for Reefer Top Closure Bracket Black E-coat finish**To Extent of Inventory

  • Used with reefer top closure brackets 25-10230 25-10231
  • Black E-coat finish
PROMI-500

Erone 1-Door Stand Alone Card Reader / Keypad **DISC

  • 500 users (proximity badges and/or codes)
  • 3 operating modes: - Mode 0: badge and code - Mode 1: badge only - Mode 2: badge or code
  • Audible & Visual feedback
  • 1 request-to-exit input
  • Tamper switch
  • 1 form C door relay output (3A/125V)
    • .......more details
PROMI-500 Wiring Diagram & Instructions
GITR-3

Genie Intellicode 3-Button Remote 37517S 390 MHz *** To extent of Inventory

  • Replaces Series II GIT-1 GIT-2 & GIT-3
  • Battery Instructions Visor Clip Included
  • Note: Only the far right of the three buttons (1 dot button) will operate those older Genie Intellicode units built from 1995 through 1997.
  • If you have a Genie unit built in 1995 1996 or 1997 this is the only remote that Genie presently makes to operate the Genie garage door openers built during these years.
  • In this special case the remotes can only be used as 1 button remotes and no other multi-button Genie remote is compatible.
Programming InstructionsInstructions de programmation
PRO-HHD-5011R-R

Micanan 1/2HP 115V 1P Heavy-Duty Jackshaft with Mechanical Contactor Right Hand (PRO HHDR)

  • 1/2 HP 115V 1 PH Industrial Continuous Duty Jackshaft Operator Ideal for Sectional Doors Rolling Steel
  • Electro-Mechanical Control Circuit (non-circuit board model)
  • 3-btn open/stop/close (02-103) wall control station included
  • Adjustable Friction Clutch 5L320 drive belt
  • #50 Roller chain 18 tooth door sprocket included
  • Emergency chain hoist with electrical cut-off for manual operation
    • .......more details
Installation manualSpecification sheet
3001-0

Signal Tube Treadle Hose Black Sold per foot

  • Applications: for gas stations and apartments
  • I.D. : 3/8"
  • Also known as Drive Over Hose.
10-30702

LiftMaster Chain Guard Top Cover Mfg Painted (K10-30702-2)

990LM

LiftMaster Surge Protector ** NLA

Installation ManualManuel d'Installation
28-32085

Truck Door 2" Vertical Track with Holes 95.00" Long for Whiting Roll-Up Doors *** To extent of inventory

  • Galvanized steel 14-gauge construction
  • Tabbed at both ends for proper alignment at track joints and to allow universal fit for both left hand and right hand frame sides.
  • Holes drilled to allow for faster plug weld installation to frame
  • For use with 2" diameter steel or nylon rollers
OES-SD16

LiftMaster Optical Edge System 16ft

  • Sectional door edge kit 16ft (4.9M)
Installation ManualManuel d'InstallationSell Sheet
MK00736

Micanan Smart 10.0 Full Feature Circuit Board Non-Monitored ** use MK00641-NM

  • For 1/3 1/2 and 3/4 Hp - 110/220V 1p 230V 3p
  • Board has 5 relays
Instructions Manual
BOARD075E

Manaras Replacement Board Kit (No Monitoring)

  • Replacement kit that includes BOARD070E (control board) & BOARD066R (power board)
  • BOARD070E is for standard operators without the monitoring function
  • For all Manaras operators built after October 2010
  • On-board 390MHz radio receiver accepts 50 remote controls
  • For older models built before October 2010 use BOARD060 or replacement kit BOARD065
Replacement ChartGuide de remplacement
MT5011U

LiftMaster 1/2 HP 120 Volt Medium Duty Trolley Operator

  • 1/2 HP 120 volt 1 phase medium-duty logic trolley operator
  • Medium-duty logic board with integral 315 MHz radio receiver
  • CPSU commercial photoeyes included
  • 4L V-Belt #48 drive chain adjustable friction clutch
  • Use on standard lift sectional doors up to 14' high and up to 12 cycles per hour
  • 2 year warranty
    • .......more details
Installation manualManuel d'installationProduct guideGuide de produit
SPREADER002

Chain Tensioner for 1" / 1-1/4"

  • Chain spreader for installation with 1" operator shaft and 1-1/4" door shaft
  • Designed to keep tension on the chain when used with a wall mount commercial operator. It helps avoid premature wear on the door shaft bearing and commercial operator output shaft bearing
Installation instructions
59LMC

LiftMaster Outside Keyswitch ** To Extent of Inventory

  • 12 tumblers provide double locking action
  • Self cleaning barrel weather-resistant aluminum plate
  • Cannot be shorted out from exterior with key
  • One "NO" contact used to activate the door operator
  • Includes two keys
Installation Manual
MJ7104

Doorlec Utility Switch 21800

  • Utility switch with a 'NO' and a 'NC' contact
  • Adjustable arm with roller
27096A

Genie Drive Gear *** To Extent of Inventory

  • Gear for Genie Chain Glide PMX Series and PCG Series
  • 3-1/2 inch diameter nylon gear with square center hole
  • Square center hole is 7/16"
36453A.S

Genie Traveler for Chain and Belt Drive Models ** To Extent of Inventory

  • Replacement carriage for models: 1022/24/26 2022/24/26 and 2200
  • Comes with a pull cord for manual release.
PRO-GH-VFD

Micanan Variable Speed 1 HP 208/230V 3 Phase Operator

  • Variable Frequency Drive Operator
  • On-Board receiver holds up to 20 transmitters
Installation manualSpecification sheet
K75-18618

LiftMaster Disconnect Kit for Grey SL595

  • Kit includes: Disconnect support bracket Detent plate Disconnect lever Release yoke Bevel and Disconnect shaft
  • Works with SL590 and SL595 Gate operators that are painted Grey
MDR/U

Linear 1-Channel MegaCode Universal Plug-In Receiver 318 MHz

  • Makes any garage door operator compatible with MegaCode transmitters
  • Simple plug-in design
  • Easy to install - one connection using two-conductor wire
  • Memory: storage for up to 10 MegaCode transmitters
  • Normally open contact activates for 0.5 seconds
  • Power: 110 VAC +/- 10% 60 Hz
    • .......more details
V300-TS

Top Seal Weather Strip 100 ft per Roll

  • For use with bottom retainers installed on top of door.
  • Vinyl: Black
50-107-30

Take-Up Reel 3-Wire Metal 30ft Extended

  • 3- wire 18-gauge
  • Also called Reel Cord
41A7114-7

LiftMaster Travel Module (41D8071-4)

  • For model: 8550W & 8160
  • Same as 41D8071-4
Installation ManualManuel d'Installation
41B7611

LiftMaster Filter Board w/Screws **to extent of inventory

  • For model: 8550
AC7

Felco C7 Cable Cutter 3/16" Capacity

  • Tool length: 8"
  • Gives a clean cut without crushing thanks to the triangular cutting system.
  • Blades and centre bolt in high-quality hardened steel for exceptional performance.
  • Thumb catch designed for one-handed operation.
  • Pressed steel handles with non-slip grips
  • Maximum cutting diameter: 7mm / 0.28in
    • .......more details
Data sheet
50-104-2

LiftMaster Orange Coil Cord 3-Wire 18-ga 20 ft. Extended Curly Cord

27-20004

Truck Door Dual-Spring Shaft 93" for Whiting Roll-Up Doors

  • Constructed of 1" outside diameter heavy-duty steel tubing
  • Holes drilled in one end only for cotter pins the other end is not drilled for flexibility
  • Cross Reference: W #2528
TUBE_SHAFT_17FT

Hollow Shaft 1" x 17-0" Galvanized 16 gauge

.218-258-L

Cut-to-Length Torsion Spring .218 x 2-5/8" Left Hand Wound Yellow/Orange

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-258-INSTALLED
.225-2-R

Cut-to-Length Torsion Spring .225 x 2" Right Hand Wound Orange/Green

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-200-INSTALLED
.218-2-L

Cut-to-Length Torsion Spring .218 x 2" Left Hand Wound Yellow/Orange

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-200-INSTALLED
10FT-I-BEAM

LiftMaster 10' chain drive rail 3710CH / CD1010

  • I-Beam chain rail for 3595 & ATS
  • Space required: 2" above heighest point of travel of the door
41A7562

LiftMaster Light Lens for 8360 8550 8355

  • Replacement light lens
CB14B0500

Cable 1/4" 7x19 500' Galvanized

  • Galvanized Cable 1/4" 7x19 500ft spool.
  • Cable break strength: 2000 lbs
Comparison charts
HD-15

Reflector Hood for 3" Round Reflector

  • Black/Charcoal
CPS-U

LiftMaster Commercial Protector System Eyes

  • For LiftMaster Logic 2 3 4 & 5 commercial operators only
  • NOT for outdoor applications
  • Allows activation of the timer-to-close
  • Mounting hardware included
  • Sensing distance of 30 feet
  • CDO 2010 Ready
    • .......more details
Installation ManualManuel d'InstallationSell Sheet
41A5021-9G-315

LiftMaster Circuit Board Assembly

  • Board: Security+ 315 MHz
  • Aeesmbly includes: circuit board and end panel
  • Also includes 1 Multi-Function wall ctrl panel - 2 wire
  • For ATS2113X model
  • For older ATS operators use replacement board 41A5021-1ATS
02-103

Push Button Station 3-btn Surface Mount Metal Housing

  • PBS-3
  • Open-Close-Stop
  • Momentary contact
  • Nema 1
  • Dimensions: 5-5/16" H x 2-3/8" W x 1-13/16" D
50-106

Take-Up Reel 2-Wire Metal 18-ga 20ft

  • 18-gauge
  • 20 ft extended
  • Take up reels are NOT recommended for use with any failsafe type edge. Use coil cord only.
  • Also called Reel cord
485LMC

LiftMaster Battery for Integrated BBU Units

  • For use in Liftmaster 8550 8500W 3850 and 8360 models
  • 12V 4.5 AMP
  • Same as Part # 41A6357-1 41A5948
  • Battery back-up good for 20 cycles
Installation ManualManuel d'Installation
7FT-RAIL-BELT

LiftMaster 7' belt drive rail 2777BD - colour code: Grey

  • Price reflects cost if purchased with an opener
535LMC*

LiftMaster Universal Radio Control Receiver 390 MHz **Replaced by 412HMC

  • Over 100 billion possible codes makes it impossible to duplicate the frequency
  • Jumper option for momentary or constant relay contact
  • Specifically for use with most 3-wire systems without a transformer
  • Accepts up tp 8 Security+ remote control codes and one keyless entry
  • Will work with LiftMaster Sears Craftsman or Chamberlain remotes with the yellow LED light - Sec+ format
  • Will work on 2 or 3 wire systems. If your system is 2-wire a 24-volt 85LM transformer is required
    • .......more details
ME123-YELLOW-LH

Miller Edge Yellow Left Hand Outlet 2-Wire 2" wide x 1-1/2" high Sold by the Foot

  • Electromechanical slide in edge for sectional doors and sliding gates.
  • Touch sensitive singaling allows for immediate stopping and reversing of motion
  • Temperature range: -30F to 155F
  • Lead wire: 22 gauge universal
  • Sensitivity: nominal 6-8 PSI
  • 2 wire NO configuration
    • .......more details
Installation ManualWorksheetSell Sheet
ME112-L

Miller Edge Black 2W Non Monitored LH Outlet 1-5/16" wide x 1-1/2" high Sold by the Foot

  • Slide in edge designed for commercial sectional doors and gates.
  • Retrofits easily to 1" to 1-1/4" sectional doors
  • Touch sensitive signaling allows for immediate stopping/reversing of motion
  • For sectional doors: measure the daylight opening of the door or measure the panel width of the door
  • This gives you the "active length" of the edge - the length to order
  • Lead wire: 22 gauge univversal
    • .......more details
Installation ManualWorksheetSell Sheet
ME113-L

Miller Edge Black Left Hand Outlet 2-Wire 1-1/2" wide x 1-1/2" high Sold by the Foot

  • Slide in edge designed for commercial sectional doors
  • Retrofits easily to 1-1/4" to 1-1/2" sectional doors
  • Touch sensitive signaling allows for immedita stopping or reversing of motion
  • For a sectional door: measure the daylight opening of the door or measure the panel width of the door
  • This gives you the "active length" of the edge - the length to order.
  • Lead wire: 22 gauge universal
    • .......more details
Installation ManualWorksheetSell Sheet
ME113-R

Miller Edge Black Right Hand Outlet 2-Wire 1-1/2" wide x 1-1/2" high Sold by the Foot

  • Slide in edge designed for commercial sectional doors
  • Retrofits easily to 1-1/4" to 1-1/2" sectional doors
  • Touch sensitive signaling allows for immedita stopping or reversing of motion
  • For a sectional door: measure the daylight opening of the door or measure the panel width of the door
  • This gives you the "active length" of the edge - the length to order.
  • Lead wire: 22 gauge universal
    • .......more details
Installation ManualWorksheetSell Sheet
.421_5-1/4"-LH

Torsion Spring .421 x 5-1/4" x 12ft LH Gold

  • Wire size: .421
  • Inside diameter: 5-1/4"
  • Length: 12 ft
.393_5-1/4"-LH

Torsion Spring .393 x 5-1/4" x 12ft LH Orange

  • Wire size: .393
  • Inside diameter: 5-1/4"
  • Length: 12 ft
.363_5-1/4"-LH

Torsion Spring .363 x 5-1/4" x 12ft LH Green/White

  • Wire size: .363
  • Inside diameter: 5-1/4"
  • Length: 12 ft
.343_3-3/4"-LH

Torsion Spring .343 x 3-3/4" x 12ft LH Blue/Red

  • Wire size: .343
  • Inside diameter: 3-3/4"
  • Length: 12 ft
365LMC

LiftMaster Universal Plug-in Receiver 315 MHz

  • Compatible with any garage door opener with a simple 2-wire dry contact
  • Includes 2-conductor bell wire
  • Able to accept 8 Security+ transmitters & 1 digital keypad
  • Compatible remotes; 893MAX 890MAX 892LT 373LM 371LM 374UT 375UT
Programming InstructionsInstructions de programmation
891LM

LiftMaster 1-btn Transmitter Sec+ 2.0

  • Controls a single garage door opener or gate operator or MyQ® enabled light accessory
  • Equipped with Security+2.0â„¢ rolling code technology that virtually eliminates radio wave interference
  • 3V lithium battery included
  • Compatible only with Security+2.0â„¢ LiftMaster® garage door openers or gate operators
  • Equivalent to Chamberlain's 950ESTD
Programming InstructionsInstructions de programmation
825LM

LiftMaster Remote Light Control Sec+ 2.0 ** To Extent of Inventory

  • Operate any lamp with your garage door opener remote control.
  • Operate from your computer or smartphone by using the Liftmaster Internet Gateway.
  • Compatible only with Security+2.0 garage door openers and MyQ technology accessories.
Programming InstructionsInstructions de programmation
375LMC

LiftMaster Universal 2-btn Transmitter ** USE 380UT

  • Dual frequency universal transmitter
  • Will activate 2 different types of openers (1 on each button)
  • Compatible with major brands except Marantec & Hormann
  • Visor clip and battery CR2032 included
Programming InstructionsInstructions de programmation
71-B240

LiftMaster Interior Mount Brake Assembly 230-460V

  • Assembly includes: Brake Hub Kit Brake Release Lever Brake Disk Spring Cup Studs Compression Springs Brake Solenoid Solenoid Cover Spacers Mounting Plate Pressure Plate Feather Key Conduit.
  • Works on LiftMaster trolley garage door openers
Instruction Manual
380LMC

LiftMaster Remote Work Light

  • For use exclusively with the LiftMaster Wall Mount Garage Door Opener (model 8500)
  • Provides 200 watts of light with adjustable light time delay
  • Lights are controlled by opener activation or control panel light button
  • Add as many lights as you wish – perfect for brightening up a dark garage or workspace
Installation ManualManuel d'InstallationTroubleshooting
K79-15016-1

LiftMaster RPM Sensor Assembly

  • RPM sensor for Liftmaster Logic Control L2 L3 L4 & L5 Commercial operators
41AC050-1M

LiftMaster Electronic Circuit Board Assembly

  • Assembly includes: circuit board end panel and light socket
  • For chain drive units with one light
  • Fits 3245 & 3255
  • Also known as 41AC050-1 041AC050-1M
23-2017

LiftMaster Limit Switch SPDT

12-10029

Flanged Bearing 3/4" x 1-1/4" x 5/8"