Devanco Canada - Get The Right Garage Door Opener‎ and Parts

RV-100

1" Vinyl Insert for Brush Retainer per foot

Color: Black
Fits in light brush retainers

4008-6FT

Aluminum Retainer only for Light Brush 6' Long 180 degree 5/8" Offset

2" with 5/8" Offset
For use with Light Brush or Vinyl Insert

1003-3"-YELLOW

Bottom U-Rubber 3" Yellow 200' Long

3" yellow vinyl insert 200ft spool.

1009-1-3/4"

Bottom Nail-On for Wood Door Heavy Duty per foot

For 1-3/4" commercial doors.
Color: Black

1006-2-10'

Rigid Vinyl Bottom Retainer U-Shaped 10' Long

Black with flexible fin to touch door face.
For door thickness 2"

1006-1-3/8-16'

Rigid Vinyl Bottom Retainer U-Shaped 16' Long

Black with flexible fin to touch door face.
For door thickness 1-3/8"

1003-1-3/8-12'

Aluminum Bottom Retainer L-Shaped

For 1-3/8" thick doors.

1104-14FT-BLACK

Residential Side & Top PVC Weather-Strip with cap 14' Long - Black (B)

Black rigid vinyl retainer with black flexible vinyl seal.
Dual fin vinyl.
Comes with cap to hide screws.

1104-7FT-DK-BRN

Residential Side & Top PVC Weather-Strip with cap 7' Long - Commercial Brown (DN)

Commercial brown rigid vinyl retainer with commercial brown flexible vinyl seal.
Dual fin vinyl.
Comes with cap to hide screws.

1104-7FT-BROWN

Residential Side & Top PVC Weather-Strip with cap 7' Long - Brown (N)

Brown rigid vinyl retainer with brown flexible vinyl seal.
Dual fin vinyl.
Comes with cap to hide screws.

7001-16-WHITE

Commercial Side & Top Weather-Strip 16' Long - White (W)

White galvanized steel with white dual fin vinyl.
Commercial and Residential use.
Steel is notched on both ends for easier installation.

1106-18-BLACK

Commercial Side & Top Weather-Strip 18' Long - Black

Aluminum retainer with black dual fin vinyl

1001-12-BLACK

Commercial Side & Top Weather-Strip 12' Long - Black

Aluminum retainer with black dual-fin vinyl

32-48-150

Extension Spring 8' Door - 150 lbs Red ** Replaced by 27-48-150

Double - Loop
32" long 48" stretch 150 lb load
Springs sold individually

Spec Sheet

25-42-100

Extension Spring 7' Door - 100 lbs Tan

Double - Loop
25" long 42" stretch 100 lb load
Sold individually
Same as part number 111
Rated for 10000 cycles

Spec Sheet

25-42-80

Extension Spring 7' Door - 80 lbs Gold

Double - Loop
25" long 42" stretch 80 lb load
Sold individually
Rated for 10000 cycles

Spec Sheet

91-00400

Truck Door Step Bolt 1/4"-20 x 1.25" (3/4" head)- Sold Per Piece

Zinc plated finish
Cross Reference: T #80015-1610 120250

26-40202

Truck Door Head Seal Retainer Only 96" Long for Roll-Up Doors

Retainer extrusion is constructed of high quality aluminum.
Panel mounted retainer
Cross Reference: T #69790 500000

26-40037

Truck Door Offset U-Channel Seal Retainer 96" Long for Whiting DryFreight Doors *** To extent of inventory

Aluminum extrusion construction.
Retainer is offset to allow header clearence with seal when door is in open position.
For use with offset bottom seal #26-40040
Cross Reference: W #8280

26-14523

Truck Door Intermediate Panel (13" x 98") for Todco DryFreight Doors

These panels are cut to an extra wide width to fit wider vehicle applications.
Interlocking tongue and groove design for weather-tight joint and proper panel alignment.
3/4" thick 7 ply exterior grade medium density plywood. Primer finish

26-14522

Truck Door Intermediate Panel (12" x 98") for Todco DryFreight Doors

These panels are cut to an extra wide width to fit wider vehicle applications.
Interlocking tongue and groove design for weather-tight joint and proper alignment.
3/4" thick 7 ply exterior grade medium density plywood. Primer finish

25E10270

Truck Door Shaft Cover for Bottom Roller Black E-coat finish for Whiting Roll-Up Doors

Steel construction Black E-coat finish
Attaches to bottom panel for roller support
Shaft cover for 1 stud
Cross Reference: W #1021

25E10003

Truck Door Roller Cover for End Hinge Black E-coat finish for Whiting Roll-Up Doors

Steel construction Black E-coat finish
Cross Reference: W #1208 T #70161

SF375

Spring Fitting 3-3/4" Pair (Long Ear)

Universal thread for use in either LH or RH wound springs.
Pair includes: (1) winding & (1) stationary.
Maximum wire size diameter: .4062".
Set screw installed: 3/8"-16 x 1-1/2" (2).
Mounting: 1" tube or solid shaft - min. 1/2 turns on the set screws.
Winding bar hole 5/8"

.......more details

H11G09

Hinge #9 x 11 gauge

11 gauge # 9 hinge - 0.90 lbs
Bright zinc-plated steel construction
For use with 7/16" stem rollers

CBC18

Thimble 1/8" - 100 per pkg

25-01431

Truck Door Stainless Cables 105" 5/16 eye 7x19 Pair for Roll-Up Doors

Works with both Whiting and Todco doors
Cable size: 1/8 "

1104-12FT-WHITE

Residential Side & Top PVC Weather-Strip with cap 12' Long - White (W)

White rigid retainer with white flexible vinyl.
Dual fin vinyl.
Comes with cap to hide screws.

1104-9FT-WHITE

Residential Side & Top PVC Weather-Strip with cap 9' Long - White (W)

White rigid retainer with white flexible vinyl.
Dual fin vinyl.
Comes with cap to hide screws.

.262-134-L

Cut-to-Length Torsion Spring .262 x 1-3/4" Left Hand Wound Red/Yellow

Priced per inch - cones sold seperately
For factory installed cones use part no. C-134-INSTALLED

OPH-6112-CONT-L

Manaras Opera-H 1/2HP 120V 1Ph with Mechanical Contactor Left Hand

A heavy-duty industrial jackshaft operator.
For use on Standard High and Vertical Lift sectional doors.
Can also be used on Rolling doors or Grilles.
Comes with a self-engaging chain hoist for manual operation.
Clearence: side room required 15"
25 cycles per hour 100 cycles per day

.......more details

Installation Manual Sell Sheet

10TD433HH1

BEA 1-Button Digital Transmitter 433 MHz

Transmitter offering means of activation of automatic doors with extended hold feature.
Delay and no-delay learn modes for either instant of delayed activation for sequencing doors.
Operating temperature: -10 to 55C
Controls one 10RD433 receiver.

WC-5810

Wheel Chock WC-5810 Pyramid Rubber with U Hook

Solid Rubber Construction
Hook for chain fastening
Long Lasting 80 Durometer rubber
Size: 8" wide x 10" long x 5" high

SNACPH39

LiftMaster HID 30-bit Proximity Card Facility Code 9 *Discontinued*

Same as SN000099-30-9
Compatible with KPR2000 reader
Replaced by LMPC2-SN (need to know facility code)

GH155-L5

LiftMaster Gearhead with Brake 1-1/2 HP 575V 3P L5

Gearhead style commercial door operators employ lubricated gears for heavy industrial high cycle applications.
GH-style operators include a floor level chain hoist to ease manual operation in an emergency or power outage.
Hoist wheel is easily moved to Right or Left hand side of unit eliminating the need to order right or left hand mounting.
MyQ Technology enables you to securely monitor and control your facility operator with your smartphone tablet or computer. Internet Gateway 828LM required.
Security +2.0 radio receiver safeguards your facility - with every click a new code is sent to the commercial door operator so the door opens only for you.
Timer-To-Close: Conveniently and confidently closes the commercial door automatically after a predetermined amount of time has elapsed for added security and peace of mind.

.......more details

Installation Manual Manuel d'Installation Sell sheet Brochure

18004B

Genie Motor Start Capacitor 220VAC 50-60 MFD

Compatible with most 1/3 HP Genie & Overhead operators

MD00382

Micanan Roller Chain #41 49 Pitch Drive with Link

For PRO T/TB

TC134-9

Top Cap 1-3/4" 9 ft Black Box Qty Only ** To extent of Inventory

Sold in box quantities only
12 pieces per box

3AG1

Miniature Fast Acting Glass Fuse 1 Amp 250V (5/pkg) - 766120

6X15SC50

Devanco Loop 6' x 15' saw-cut 50' lead-in

Manufactured to the highest quality standards to ensure accurate detection our Pre-formed loops come with a 50 foot twisted lead-in ware and available lead-in lengths up to 500 feet.
Ideal for use on existing asphalt or concrete surfaces
Features a non spliced continuous wire throughout loop turns and lead-in.
requires the use of loop sealer when being installed to ensure long lasting trouble-free detection

Installation Instructions Instructions d'installation Loop Placement Guide Guide de positionnement des boucles

LPWKP-G

Linear MegaCode Wireless Keypad 318 MHz Cool Grey **** Replaced by NMTK

Activates multiple MegaCode receivers
User selects 1 to 6 digit PIN number or 1 to 6 letter PIN name
Programming is easy via the keypad; MegaCode receiver auto-learns PIN
Backlit keys for easy viewing
Wall mounting hardware (2 screws and anchors) supplied
Power: Three AAA batteries

.......more details

1001-10-GREY

Commercial Side & Top Weather-Strip 10' Long - Grey

Aluminum retainer with grey dual-fin vinyl
Sold by full case quantity (10)

PRO-GT-10011-U

Micanan 1HP 115V 1P Worm Gear Trolley Operator N1 Eyes Monitored ECB

OHJ-6533-ECB

Manaras Heavy-Duty Jackshaft Operator 3/4 HP 600V 3 Ph with Elect. Circuit Board

25 cycles per hour 100 cycles per day
An Industrial duty operator featuring both the patented Hoist-a-Matic a self-engaging chain hoist for manual operation as well as a floor level disconnect
Specifically designed to motorize grills when a manual egress is required
Mechanical brake
Hoist on right standard
Full overload protection

.......more details

Installation Manual Sell Sheet

LB410-14SF

Steel Faced Laminated Bumper Black 10" x 14" 4" Projection Horizontal Installation

Used on docks where excessive friction from up and down trailer movement occurs (yard jockeys air ride trailers etc.).
Can be used in material handling application where medium to heavy dock protection is required
“Gliding” heavy-duty steel face is 3/8” thick and independently anchored with elongated holes to face of bumper allowing bumper to compress AND offer high surface abrasion resistance
Rubber pads laminated between steel angles and secured with 3/4” rods
Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
Wall mounting hole size is 7/8” diameter.

.......more details

OPH-6213-ECB-LH

Manaras Opera-H 3/4HP 240V 1Ph with Electronic Circuit Board Left Hand

A heavy-duty industrial jackshaft operator
For use on Standard High and Vertical Lift sectional doors
Can also be used on Rolling doors and Grilles
Comes with a self-engaging chain hoist for manual operation
Clearence: side room required 15"

BCSI-HV-100-53

Industrial Slide Gate Operator Variable Speed 1 HP 600V 3 Ph with Heater ** Price by Quote Only

Heavy-duty alminum cabinet Nema 3R
Programmable logic controller
Adjustable friction clutch
Thermostat controlled heater
Opening / Closing speed of 24" / sec
Nema 4 control panel

.......more details

Installation manual Sell sheet Brochure Installation overview Dessin de installation Diagnostics and troubleshooting Diagnostics et dépannage

ZAP-800-3-PB

Zap Control Box Assembly for ZAP800

PRO-HB-5011U-RH

Micanan 1/2HP 115V 1P Hoist Op. with Brake N1 Eyes Monitored ECB Right Hand

Continuous duty belt drive jackshaft operator with emergency chain hoist
Full function Smart 10.0 Logic control board featuring on-board receiver with antenna
Nema 1 photoeyes included
Solenoid brake included
On-Board receiver holds up to 20 transmitters

Installation manual Specification sheet

748

Fasteners Self Drill & Tap Tek Screw 1/4-20 x 3/4" (#2PT) 1000/Box

Indented Hex Washer Head
7/16" Head
Max RPM = 2000
#2 point = shorter cutting edge (more thread)

PRO-J-5081-U-LH

Micanan 1/2HP 208V 1P Jackshaft Monitored ECB N1 Eyes Left Hand

On board receiver with antenna
Continuous duty industrial motor with overload protection
Heavy duty 5L V-belt
Adjustable friction clutch
Solenoid brake (optional PRO-JB) recommended for large doors
3/4" permanently lubricated & sealed precision ball bearings on pulley shaft

.......more details

Specification Sheet

.207_2"-RH

Torsion Spring .207 x 2" x 12ft RH Brown

Wire size: .207
Inside diameter: 2"
Length: 12 ft

MK-00071

Micanan Transformer 575V-115V-50VA (MK00161)

50445

Doorlec Mushroom Push-Button Red with 2 Contacts

Capable of opening two doors or gates simultaneously
NEMA 4 Enclosure

K29-PB125

LiftMaster Reversing Motor Controller 115V KBPB-1

MDR

Linear 1-Channel MegaCode Receiver 318 MHz *** Discontinued

Activates one device
Wire lead antenna
Mounting bracket supplied
Memory: storage for up to 10 MegaCode transmitters
Power: 24 VAC/VDC
Codes: 1000000+ (MegaCode format)

.......more details

Programming Instructions

CP-SW-AT

Lynx Single Limit Switch

M005

Rolling Steel Groove Mouth GM6789 Fire Door

ME120-BLK-E-6FT

Miller Edge 2-Wire Black End Outlet 6 ft Long

Electromechanical slide in edge with a small profile for motorized gates and doors rolling shutters and pinch point protection applications.
Touch sensitive signaling
Temperature range: -30F to 155F
Lead wire: 18 gauge 2ft length
Sensitivity: nominal 4 PSI
2 wire NO configuration

.......more details

Installation Manual Sell Sheet

36664R

Genie Screw Drive Shuttle Assembly

Compatible with the following models: GPower 900 TriloG 1200 TriloG 1500 PowerMax 1200 PowerMax 1500
Works with Screw Drive carriage assembly part # 37845R - sold seperatelty

27-20010

Truck Door Dual-Spring Shaft 96" for Whiting Roll-Up Doors

Constructed of 1" outside diameter heavy-duty steel tubing
Holes drilled in one end only for cotter pins the other end is not drilled for flexibility
Cross Reference: W #2528

K74-34582-1

LiftMaster Plastic E-Box Assembly for LA500CONT

Plastic replacement box only

1001-16-BLACK

Commercial Side & Top Weather-Strip 16' Long - Black

Aluminum retainer with black dual-fin vinyl

27-48-110

Extension Spring 8' Door - 110 lbs White

Single - Loop
27" long 48" stretch 110 lb load
Sold individually
Rated for 10000 cycles

Spec Sheet

E/1929/025

Automatic Systems Bumper and Limit Switch Ass'y (BL229)

Used on the BL229 gate op.

SR-9004-WHITE

Elton Reverse Angle Clip-On Vinyl White 200ft Roll

Side Use – Clips onto Steel Jamb
Also for Residential Use

2806.182*290

Whiting Spring Assby .1182 x 2-3/16 x 29" Roadside

Replacement torsion spring with cones
Specs: .1182 x 2-3/16" x 29" Long
Roadside
For Curbside order part # 2807.182*290

PRO-HBH-7511U-R

Micanan 3/4HP 115V 1P Heavy-Duty Jackshaft N1 Eyes Monitored ECB Right Hand (Pro-HHD)

3/4 HP115V 1PH Industrial Continuous Duty Jackshaft Operator Ideal for Sectional Doors Rolling Steel
Monitored logic board with integral 372Mhz radio receiver that can hold up to 20 transmitters (MK-00647/ MK-00653/ MK-00659) or 200 of the 1 channel hand held transmitters (MK-00660).
N-1 Through-beam (MK-00649) photocells included. Other options available.
3-btn O/S/C (02-103) wall control station included
Adjustable Friction Clutch 5L320 drive belt
#50 Roller chain 18 tooth door sprocket included

.......more details

RB-TX20

Miller Edge RBand Wireless Edge Transmitter

111-0362

RW Box Track #333 10ft

For doors up to 1000 lbs
10 ga steel

2100-917-UPS

Linear Shaft Output 1" HSLG UPS

42685

Doorlec SGP Operator Cabinet Only

D0MKTRP017

DURULITE STD-IND V-CAM CAST ASSEMBLY KIT

-Cam Assembly Kit for Chase Doors Standard DURALITE model doors. fits 90 x 90 spec door.

2510-430

Linear Box Power Assemly SW/SL 230V Apex

The 2510-430 is a replacement Linear 208/230V Power Box Assembly
Input Voltage: 220/230/240 AC (60 Hz 1 Phase)

ALUM-510

Aluminum 24" x 100' Spool Canyon Clay / Argile # 510

20% thicker than the aluminum sold in retail stores (0.022" )
Gentek # 510
Reverse side is #431 Bright White

1005-3-18'

Aluminum Bottom Retainer 3" U-Shaped 18' Long

For door thickness 3"

D4-12

Extruded Bumper Black 12" L x 4 1/2" W x 3 3/4" H w/Metal Insert

Reinforced prime rubber of Durometer 75 (±5) (ASTM D2240)
8.3 N/mm2 (±0.5) Tensile Strength (ASTM D792)
98% (±2) impact recovery
All extruded fenders are supplied with a metal washer insert

OPH-6232-M-N1-LH

Manaras Opera-H 1/2HP 208V 3Ph with Monitored Board and N1 Photoeyes Left Hand

Monitored version with Nema 1 photoeyes

K41-0095-000

LiftMaster DC Motor Drive HD Gate

This service kit is compatible with the following models: HDSL24UL & HDSW24UL

E/1929/236

Automatic Systems Rod Assbly w/2 Rod Ends (BL229)

Used on the BL229 gate op.

210316

Skylink AT3 1HP Atoms Head for Tube Rail

LQ803

BEA-35-1566

BEA Power Cable RS-20US IS40

Replacement power cable only 35.1566
Replaces 35-1195
RS-20 US-Colored. Cable gland M16

ME210-C3

Miller Edge Black Rigid PVC Mounting Channel "L" Shape Sold by the Foot

Used on CPT-210 extrusion

D1101KH-C-S-SSV2A

Doorbird Classic IP Video Door Station Stainless Steel Surface-Mount

Video intercom including surface mounting housing
Keypad Module: Configurable via App Up to 500 individual PIN codes Individual events (e.g. trigger a relay HTTP(s) request)
LAN connection (PoE compatible)
2-Way audio
Ultra-wide angle lens HD video 1080P night vision IR LEDs
4D motion sensor

.......more details

Installation Manual - DH11 Series

BPPN17524

Garex Bottom PVC Moulding Black for 1 3/4" Door U shaped 289" (24')

26141-NEW

Doorlec Cam Shaft 11-1/4" x 5/8" (28.575 x 1.59cm)

Fits the new larger box

GAREX-24X12-CBRN

Garex Thermo Window Clear 24" x 12" Commercial Brown Frame

An original Garex window
Fits 1-3/4" thick door R16

GAREX-24X12-GLASS

Garex Thermo Window Clear 24" x 12" Glass Only

An original Garex glass No frame

GALV-343-6-144-R

Torsion Spring .343 x 6" x 12ft RH Galvanized Blue/Red

Wire size: .343
Inside diameter: 6"
Length: 12 ft
Galvanized

WHITING-COLDSVR

Whiting Cold Saver Panel Special Order- Made to Measure Quote Only

Special Order Sold by Quote Only

IP-MON

CDVI Interior Touch Screen Monitor for IP-MDS/IP-SDS Video Intercom System

Interior 7" touch screen TFT monitor for use with the IP-MDS/IP-SDS intercom systems in white.
IP system connects through the PoE system and also has a free to download app available on iOS and Android. The VDP app allows for users to connect with visitors at the door station and can control the door locks remotely.
Rectangular shape (available in square shape: IP-MONSQ)
SIP Server
Operating temperature: -10C to 55C
Call recording and built-in memory

.......more details