Devanco Canada

 
User Name:
Password:
Remember Me:
Forgot your password
Request a Login
Home
2806.177*290

Whiting Spring Assby .177 x 2-3/16 x 29" Roadside

  • Replacement torsion spring with cones
  • Specs: .171 x 2-3/16" x 29" Long
  • Roadside
  • For Curbside order part # 2807.177*290
3228.3

Whiting 2" Nylon Roller 3" Stainless Steel Shaft

  • This is a Whiting original roller
041-0400-000

LiftMaster Door Shaft Collar

  • Fits with LiftMaster model #98032
041D8993

LiftMaster Cover Silver 8365W 83650-267

  • Replacement LiftMaster® Cover.
  • Compatible with various LiftMaster® 8365W Series WiFi® AC Chain Drive Garage Door Openers; powered by myQ
MI00034

Micanan Pulley 9" OD c/w Bushing 3/4" ID

GT103L5

LiftMaster Heavy Industrial-Duty Trolley Op. 1 HP 208/230/460VAC 3PH

  • Suspended from the ceiling the operators are used on sectional overhead doors with a standard lift.
  • GT operators are directly attached to drive and control the door
  • MyQ® Technology enables you to securely monitor and control your facility operator and lights with your smartphone tablet or computer for greater peace of mind.
  • Requires 828LM MyQ Internet Gateway to connect to MyQ Smartphone App.
  • High-starting torque continuous duty motor with overload protection
  • Door speed approx. 11-12 inches per second
    • .......more details
GX-200-MG

Garex Ready to Install Door Multi-Grooved Special Order

  • 21" panel = 4 grooves 24" panel= 5 grooves
  • COMPLETE JOINT SEAL No air circulation between the panel sections eliminating thermal bridges.
  • Minimize the heat transfer between the inside and outside of your garage.
  • LIGHTWEIGHT AND ROBUST PANEL Polyurethane foam insulation pressure injected between the interior/exterior faces
  • WOOD END BLOCKS Suitable to receive steel end caps
  • HIGH-PERFORMANCE DESIGN Flexible rubber inserted into a PVC reinforced moulding offering a tightly sealed fit to the floor
    • .......more details
SCREW002

Manaras 1/4"-28 x 1/4" Set Screw

GALV-406-6-L

Cut-to-Length Torsion Spring .406 x 6" Left Hand Wound Galvanized Blue/Yellow Price per Inch

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-600-INSTALLED
  • Galvanized
GALV-393-6-144-L

Torsion Spring .393 x 6" x 12ft LH Galvanized Orange

  • Wire size: .393
  • Inside diameter: 6"
  • Length: 12 ft
  • Galvanized Stenciled
GALV-393-6-144-R

Torsion Spring .393 x 6" x 12ft RH Galvanized Orange

  • Wire size: .393
  • Inside diameter: 6"
  • Length: 12 ft
  • Galvanized Stenciled
K41-0241-000

LiftMaster Transformer for IHSL24UL

  • Compatible with LiftMaster® IHSL24UL Series Industrial Heavy Duty Slide Gate Operators
E/1929/201

Automatic Systems Limit Switch Assembly

  • Used on the BL229 gate op.
OSH-6434-M-N1-LH

Manaras Opera-SH 1 HP 480V 3 Ph Monitored Board w/N1 Eyes Left Hand

  • An ultra high-end heavy-duty V-belt drive industrial jackshaft operator
  • For use on Standard High and Vertical Lift sectional doors
  • Can also be used on Rolling doors and Grilles
  • Comes with a chain hoist for manual operation and a floor level engaging device
  • Clearence: side room required 16"
  • 25 cycles per day > 100 cycles per day
    • .......more details
Installation Manual
GHX-353-1.5HP-R

Doorlec Explosion Proof Gear Head 1-1/2 HP 575V 3PH ECB Right Hand

  • Nema 7/9 control box
  • Electrical connections from motor to control box consists of hazardous location certified fittings
  • NEMA 7/9 O/C/S push-button station included
15-50B50QGH

Sprocket Kit 50B50 1.25" Bore x 1/4" Key w/ SS

E/1929/094

Automatic Systems Left Bumper Ass'y (BL229)

  • Used on the BL229 gate op.
2110-643-UPS

Linear Snap Lock Assembly with Keys (2)

  • Fits HSLG GSLG-A Ups
OSH-6232-M-N1-RH

Manaras Opera-SH 1/2 HP 208V 3 Ph Monitored ECB w/N1 Photoeyes Right Hand

  • An ultra high-end heavy-duty V-belt drive industrial jackshaft operator
  • For use on Standard High and Vertical Lift sectional doors
  • Can also be used on Rolling doors and Grilles
  • Comes with a chain hoist for manual operation and a floor level engaging device
  • Clearence: side room required 16"
Installation Manual
MQ00020

Micanan Spring Pin 3/16" x 1-3/4" Long

MD-00242

Sprocket 41B14 x 3/4"

2705.177_13.5

Whiting Curbside Torsion Spring 2-3/16" ID 13-1/2" Long

  • Torsion spring wire only
  • .177 wire size
GALV-295-258-R

Cut-to-Length Torsion Spring .295 x 2-5/8" Right Hand Wound Galvanized Blue Price per Inch

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-258-INSTALLED
MV00080

Micanan Emergency Egress Device 15ft

TDC7-16

Liftmaster Comm. 16FT Trolley Angle set (10-5816-P x 2) and #48 chain pack (TDC48-16) ***Actual length 227"***

  • Double Angle Rails for doors up to 16'6" high
  • Includes #48 chain pack
343

Cable Clamps Galvanized 3/8" Sold per piece

  • Galvanized malleable cable clip
SHAFT028

Manaras FDGHE Cam Shaft 5/8"-18

400-CBAC-STD-115V

FAAC Standard Gate Arm w/Positive Stops 40-1/2" L *** Price by Quote Only

  • 400 CBAC Standard (Short) Arm with positive stops 40-1/2" tip-to-tip
  • Replacement arm for hydraulic Swing Gate Operator 10420112.5
  • This arm is meant to be used to transform a kit into a master/slave or bi-parting system or as a replacement operator for an existing FAAC system
  • Dimensions: 40.5 x 3.35 x 3.35
GALV-295-6-R

Cut-to-Length Torsion Spring .295 x 6" Right Hand Wound Galvanized Blue Price per Inch

  • Priced per inch - cones & filler sold seperately
  • For factory installed cones use part no. C-600-INSTALLED
OGH-6534-M-N1-LH

Manaras 1 HP 600V 3Ph Gear Head Operator Monitored ECB w/N1 Eyes Left Hand

  • A heavy-duty worm gear industrial operator designed for use on industrial standard high and vertical lift sectional doors or rolling doors and grills.
  • Includes a self-engaging chain hoist for manual operation
  • 25 cycles per hour 80 cycles a day
  • Hoist on right side standard can easily be moved to the left in field
  • Full overload protection
  • BRACKET112 must be used for wall mounting
    • .......more details
GALV-343-334-144-R

Torsion Spring .343 x 3-3/4" x 12ft RH Galvanized Blue/Red

  • Wire size: .343
  • Inside diameter: 3-3/4"
  • Length: 12 ft
  • Galvanized
GALV-343-334-144-L

Torsion Spring .343 x 3-3/4" x 12ft LH Galvanized Blue/Red

  • Wire size: .343
  • Inside diameter: 3-3/4"
  • Length: 12 ft
  • Galvanized
GALV-331-258-144-L

Torsion Spring .331 x 2-5/8" x 12ft LH Galvanized Red/White

  • Wire size: .331
  • Inside diameter: 2-5/8"
  • Length: 12 ft
  • Galvanized
GALV-273-334-144-R

Torsion Spring .273 x 3-3/4" x 12ft RH Galvanized Orange/Red

  • Wire size: .273
  • Inside diameter: 3-3/4"
  • Length: 12 ft
  • Galvanized Stenciled
GALV-273-2-144-R

Torsion Spring .273 x 2" x 12ft RH Galvanized Orange/Red

  • Wire size: .273
  • Inside diameter: 2"
  • Length: 12 ft
  • Galvanized Stenciled
GALV-250-334-144-L

Torsion Spring .250 x 3-3/4" x 12ft LH Galvanized Green

  • Wire size: .250
  • Inside diameter: 3-3/4"
  • Length: 12 ft
  • Galvanized Stenciled
MGH-6536-M-N1-LH

Manaras 2 HP 208V 3P Jackshaft Monitored w/N1 Eyes Left Hand

  • A very heavy-duty worm gear industrial operator designed for use on Industrial standard high and vertical lift sectional or rolling doors and grilles.
  • It incorporates a chain hoist for manual operation with a floor level engaging device with electrical cut-out
  • Electrically activated drum-band type solenoid brake
  • Full overload protection
VTS3-PER-FOOT

Top Seal vinyl only Black Price per Foot

S6TL2641E15

Erone 18-Channel Handheld Transmitter 433MHz

Wireless System Chart
BEA-10LIGHT-TR

BEA Modular LED Signal Light Segment Red

  • Signal lights for industrial and vehicle flow management applications.
  • LED signal modular lights offer customizable configurations with “build-your-own” lighting elements that share a common base and bracket.
  • These LED signal units are available in red green yellow and an audible alarm cap and can be stacked in a tower configuration with up to six modules.
  • Operating temperature: -40 to 122F
  • Nema 4/IP65
  • Base sold separately
    • .......more details
User GuideDatasheet
BEA-10LIGHT-TG

BEA Modular LED Signal Light Segment Green

  • Signal lights for industrial and vehicle flow management applications.
  • LED signal modular lights offer customizable configurations with “build-your-own” lighting elements that share a common base and bracket.
  • These LED signal units are available in red green yellow and an audible alarm cap and can be stacked in a tower configuration with up to six modules.
  • Operating temperature: -40 to 122F
  • Nema 4/IP65
  • Base sold separately
    • .......more details
User GuideDatasheet
2806.192.320

Whiting .192 x 2-3/16 x 32" Roadside with Cones

15-50B16LGH

Sprocket 16 Teeth 1" Bore 1/4" Keyway w/SS

BEA-35-1555

BEA 50' of Cable Only for LZR Widescan

  • Optional 50 ft cable for use with the LZR-WIDESCAN
2200-555

Linear Sprocket 40A48 Machined

2200-817

Linear Belleville Washer

2200-042

Linear Sprocket 48B15 1" Bore

2400-501

Linear Retaining Ring

VGD-RB-1/2T-10

VGD Red Beast Lever Hoist 1/2 Ton 10ft Chain ** Price by Quote

  • Compact design
  • Light weight robust construction
  • Fully machined lifting wheels
  • Grade 80 alloy load chain
  • Sealed bearings
  • Triple spur geared guarantees ef cient/reliable operation
    • .......more details
GH4416-50

Green Hinge 5-Panel Commercial System Set

  • The Green Hinge System provides a close tight seal of your door to your building eliminating gaps and saving energy and money!
  • Patented spring-loaded garage door hinge system that allows automatic adjustment of the overhead garage door closing up to 1/4in side gap
  • Reduces dirt dust bugs rain & moisture
  • Quick and Simple installation
  • Fits Residential & Commercial Doors
  • 100% Made & Assembled in the USA
    • .......more details
OMT-6112-MON-N1

Manaras Medium-Duty Trolley Operator 1/2 HP 120V with Elect. Circuit Board Monitored N1 Eyes

  • Designed for use on smaller and low-cycling industrial standard lift sectional doors.
  • It features a high starting torque intermittent-duty industrial type motor and a quick release disconnect arm.
  • Equipped with the new Electronic Control Board (BOARD 070) with N1 photoeyes
  • Maximum Door Height: 14' (4260 mm)
  • Back Room: door height + 3'11" (1175 mm)
  • Head Room For Tracks: 5" (127 mm) above the highest point of door travel
    • .......more details
P-8833T-OCS

Pulsar 3-btn 1-Door O/C/S Transmitter 109372-Compatible 318 MHz

  • Open/Close/Stop remote for 1 door
  • Compatible with 3-channel Allstar and MVP receivers
  • Portable transmitter
  • Easy access to battery and coding switch
  • Power: 9-volt battery
  • Codes: 6561 (set by eight trinary dip switches)
    • .......more details
70225.000

Truck Door Todco 2" White Nylon Quiet Roller ** Price by Quote Only

5001-10-WHITE/BLK

Residential Side & Top Weather-Strip 10' Long - White Aluminum/Black Vinyl

  • Painted aluminum retainer with flexible dual fin black vinyl.
  • Residential use.
50220

Doorlec Lifting J-Arm Assembly Trolley

29120

Doorlec Transformer 120V pr 28 V. sec. 50VA

  • 120V primary 28 V secondary 50VA
15591

Doorlec "C" Clip 5/8"

25130

Doorlec Seal Oil CR6372

SRDRKP

LiftMaster Keypad Smart Reader

  • LiftMaster Smart Readers offer a contemporary appearance and leading-edge feature set to add access control to any door or entrance in your building or community including mobile credentials capabilities.
  • Standard technologies include Proximity (125 KHz) Smart (1356 MHz) and Bluetooth so that customers can migrate to newer secure credentials.
  • BLE communication enables myQ Mobile Credentials within the myQ Community app and ecosystem.
  • OSDP Auto-Connect feature to switch from Wiegand to OSDP when connected to the OSDP port on the CAPXLV2.
  • Accelerometer - based tamper detection
  • Tri-State LED light bar for user feedback
    • .......more details
FRONTIDLER006

Manaras Front Idler Assembly #41 Very Heavy Duty

  • MOD073
SD103L5-LH

LiftMaster Heavy-Duty Slide Door Operator 1 HP 208/230/460 3PH Left Hand (Must include hardware box)

  • Perfect for split and sliding doors involved with industrial applications.
  • It is installed above the door and corresponds with the direction the door will be traveling.
  • Comes equipped with an emergency disconnect and for manual lifting in an emergency and automatic reconnect.
  • The new logic 5 commercial operators come with MyQ Technology built in. * 828LM required
  • Built In Security+ 2.0 radio receiver
  • Solenoid brake included
    • .......more details
GALV-312-334-R

Cut-to-Length Torsion Spring .312 x 3-3/4" Right Hand Wound Galvanized Yellow

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-375-INSTALLED
  • Galvanized
GALV-375-6-L

Cut-to-Length Torsion Spring .375 x 6" Left Hand Wound Galvanized Yellow/Green Price per Inch

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-600-INSTALLED
  • Galvanized
50450

Doorlec Mushroom Push-Button Red for 3-Doors

  • Capable of opening three doors
  • NEMA 4 Enclosure
GALV-262-2-144-R

Torsion Spring .262 x 2" x 12ft RH Galvanized Red/Yellow

  • Wire size: .262
  • Inside diameter: 2"
  • Length: 12 ft
  • Galvanized Stenciled
GALV-363-334-R

Cut-to-Length Torsion Spring .363 x 3-3/4" Right Hand Wound Galvanized Green/White Price per Inch

  • Priced per inch - cones sold separately
  • For factory installed cones use part no. C-375-INSTALLED
GALV-295-334-L

Cut-to-Length Torsion Spring .295 x 3-3/4" Left Hand Wound Galvanized Blue Price per Inch

  • Priced per inch
  • For factory installed cones priced seperately - use part no. C-375-INSTALLED
GALV-262-258-R

Cut-to-Length Torsion Spring .262 x 2-5/8" Right Hand Wound Galvanized Red/Yellow Price per Inch

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-258-INSTALLED
GALV-234-2-RH

Cut-to-Length Torsion Spring .234 x 2" Right Hand Wound Galvanized Price per Inch

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-200-INSTALLED
BEA-10FALCON-EX30

BEA Falcon Motion Detector w/Exp Proof Housing 30ft Cable

  • FALCON EX combines a microwave activation sensor with an explosion-proof/flame-proof housing
  • Ideal for use in unique environments such as chemical manufacturing petroleum refining and agriculture.
  • FALCON EX can be mounted from 11.5' to 23' to fit any industrial application.
  • Nema4/IP66
  • Detection Zone: Falcon EX: 13’×16’ at 16’
  • Operating temperature: -22 to 140F
    • .......more details
GAREX-PAINT-SBL

Garex Touch-Up Paint Sable

2705.148_140

Whiting Curbside Torsion Spring for Cube Truck Roll-Up Doors 14" Long

  • Most common torsion spring for cube trucks
  • Specs: .148 x 2-3/16" x 14" Long
  • For Roadside order part # 2704.148*140
OSH-6213-M-N1-RH

Manaras Opera-SH 3/4 HP 240V 1 Ph Monitored ECB w/N1 Photoeyes Right Hand

  • An ultra high-end heavy-duty V-belt drive industrial jackshaft operator
  • For use on Standard High and Vertical Lift sectional doors
  • Can also be used on Rolling doors and Grilles
  • Comes with a chain hoist for manual operation and a floor level engaging device
  • Clearence: side room required 16"
  • 25 cycles per day > 100 cycles per day
    • .......more details
Installation Manual
GHW-311-1HP-RH

Doorlec Ind. Duty Jackshaft Carwash Op. 1 HP 115V 1P with ECB

  • With DC2000 logic board
  • Worm-Gear Jackshaft type Industrial operator NEMA 4/12
BEA-10-MINI-BRKT

BEA Mini Industrial Bracket Adjustable 6-12 "

  • Adjustable from 6 - 12 inches (up to 4" maybe cut off for shorter applications)
  • 12" x 2.5" Mounting Face
  • Fasteners NOT Included
  • Carbon Steel Black Powder Coated
Installation Guide
E/BLOP/121

Automatic Systems Option 1 Kit 2 LED Lights on Arm

  • Increases visibility of the arm on BL229 gate operator
SA1929/A51

Automatic Systems Board w/Battery Assy for BL229

NO_REFLECTOR

Garlo Gavazzi No Reflector Required

TRANSF168

Manaras Transformer 480X600-240V 60HZ 1500VA Leads Rapido

  • 480X600-240V 60HZ 1500VA LEADS
DHJ751L5-LH

LiftMaster Ind. Duty Hoist/Jackshaft Op. 3/4 HP 115/230 VAC Logic 5 Left Hand***Discontinued

  • Industrial-Duty Hoist/Jackshaft Operator with Internal Door Lock Sensor
  • Optimal for shopping mall applications with heavier rolling doors and grilles.
  • Provides a floor level chain hoist to ease manual operation in an emergency or power outage.
  • Includes a door lock sensor to prevent damage to the door and operator caused by attempts to automatically open a locked door.
  • Industrial Ball Bearings on 1" Output Shaft
  • Second Floor-Level Disconnect for Manual Lifting in an Emergency
    • .......more details
2050Z

LiftMaster HD Roller Cage Bearing Hinge Bolt to Gate/Post Zinc Coated Sold Individually

  • Heavy Duty Roller Cage Bearing Hinge - Bolt to Gate Bolt to Post (Corrosion Protected Zinc Coated)
  • Heavy Duty Construction for Maximum Durability
  • Dependable Roller Cage Bearing Design
  • Even Weight Distribution
  • Five Times The Weight-Bearing Surface of the Nearest Large Hinge
  • Convenient Bolt-On Model
    • .......more details
CG-HOIST-SINGLE-1

ControlGard Chain Hoist Single Compound 1" Bore

  • Cornell Single Compound hoists are designed for smaller doors
  • Features an integral braking system that only moves when the user is actively pulling the chain
REDUCER008

Manaras Reducer CC80-40D FR 182TC (40:1)

  • For 3 HP motor
PCBA-PD3.3

Dyna Hoist/Pulse Replacement Drive Board for DC500-100

DM54-COATED

Cable Drum High Lift 54" 5250-54 Specialty Coated Pair

  • 54" High Lift aluminum die cast alloy.
  • 3/8"-16x2" hardened cup point set screws installed with red heads.
  • Color coded: Red-LH and Black=RH.
  • Maximum High Lift: 54" Maximum Door Height: 180" + High Lift
  • Rated lift per drum: 500 lbs
  • Maximum cable diameter: 3/16"
    • .......more details
OGH-6533-M-N1-LH

Manaras 3/4 HP 600V 3Ph Gear Head Operator Monitored ECB w/N1 Eyes Left Hand

  • A heavy-duty worm gear industrial operator designed for use on industrial standard high and vertical lift sectional doors or rolling doors and grills.
  • Includes a self-engaging chain hoist for manual operation
  • 25 cycles per hour 80 cycles a day
  • Hoist on right side standard can easily be moved to the left in field
  • Full overload protection
  • BRACKET112 must be used for wall mounting
    • .......more details
OPH-6112-M-N1-LH

Manaras Opera-H 1/2HP 120V 1Ph Monitored ECB and Nema1 Eyes Left Hand

  • A heavy-duty industrial jackshaft operator.
  • For use on Standard High and Vertical Lift sectional doors.
  • Can also be used on Rolling doors or Grilles.
  • Comes with a self-engaging chain hoist for manual operation.
  • Clearence: side room required 15"
  • 25 cycles per hour 100 cycles per day
    • .......more details
MQ00011

Micanan 3/32" Aluminum Oval Sleeve Sold per Unit

5001-12-BLACK

Residential Side & Top Weather-Strip 12' Long - Black

  • Painted aluminum retainer with flexible dual fin vinyl.
  • Residential use.
2806.171.250

Whiting Spring Assby .171 x 2-3/16 x 25" L Roadside

  • Replacement torsion spring with cones
  • Specs: .171 x 2-3/16" x 25" Long
  • Roadside
  • For Curbside order part # 2807.171.250
2807.177*270

Whiting Spring Assby .177 x 2-3/16 x 27" Curbside

  • Replacement torsion spring with cones
  • Specs: .177 x 2-3/16" x 27" Long
  • For Roadside order part # 2806.177.270
2807.162.220

Whiting .162 x 2-3/16 x 22" Curbside with Cones

CGT101L5

LiftMaster Heavy Industrial-Duty Trolley Op. 1 HP 115V w/Carwash Mod. N4

  • Suspended from the ceiling the operators are used on sectional overhead doors with a standard lift.
  • GT operators are directly attached to drive and control the door
  • MyQ® Technology enables you to securely monitor and control your facility operator and lights with your smartphone tablet or computer for greater peace of mind.
  • Requires 828LM MyQ Internet Gateway to connect to MyQ Smartphone App.
  • High-starting torque continuous duty motor with overload protection
  • Door speed approx. 11-12 inches per second
    • .......more details
GHW-353-2-RH

Doorlec Ind. Duty Jackshaft Carwash Op. 2 HP 575V 3P Right Hand

  • With DC2000 logic board
  • Worm-Gear Jackshaft type Industrial operator NEMA 4/12
111854.0005

Overhead Logic Board 575V 3Ph RSX/RHX

  • For RSX/RHX commercial ops. 575V
20.5359

BEA Harness IXIO with Relay 30ft

RECTIFIER008

Manaras Eurodrive Blue Rectifier BGE3 3AMP

SF375-S

Spring Fitting 3-3/4" Stationary Side Only Long Ear 1" Bore

  • Universal thread for use in either LH or RH wound springs.
  • Maximum wire size diameter: .4062".
  • Set screw installed: 3/8"-16 x 1-1/2" (2).
  • Mounting: 1" tube or solid shaft - min. 1/2 turns on the set screws.
  • Winding bar hole 5/8"
EHJW-321-3/4

Doorlec Ind Jackshaft Op. Watertight ECB 3/4 HP 230V-1Ph

  • Heavy-Duty Industrial Operator with Waterproof Mod. for Sectional or Rolling Steel Doors
  • DC-2000 logic with adjustable Timer-To-Close Delay On Reverse and Traffic Light Control (monitored board optional)
  • Solenoid Brake prevents coasting and secures the door when closed
  • TEFC (sealed) continuous duty electric motor with overload protection
  • Automatic Friction Clutch protects the door and operator
  • Self-aligning Heavy Duty sealed Pillow Block bearings on all shafts for high cycle applications
    • .......more details
MP00224

Micanan Track and #41 Waterproof Chain for 7' h Door

  • For 3/4 & 1 HP Micanan trolley operators