Devanco Canada

 
User Name:
Password:
Remember Me:
Forgot your password
Request a Login

ME00026

Micanan Limit Shaft 1/2" x 11" PRO FDG

FD165C

Electric Motor Only 1.5 HP 110V 1Ph 56C Flange

MK00709

Micanan Varistor Harness 460V with Red Wires

26CW945255-CUT

Truck Door Intermediate Panel (15.5" x Cut-to-Size ) Painted White for Whiting Dryfreight

  • These panels are cut to customer's exact measurements.
  • Interlocking tongue and groove design for weather-tight joint and proper panel alignment.
  • 3/4" thick 7 ply exterior grade medium density plywood.
  • Painted white
MX00203

Micanan Complete Control Box Only for PRO-HHDU/TU Nema 1 110V

MV-00245

Allen Bradley Thru-Beam Photocell 42GRL Rec/Trans 110V 0-30ft Range

  • 42GRL 9000 and 42GRR 9002 transmitter 110V/receiver (24/115V) set
MK00642-NM

Micanan Full Feature Circuit Board with Contactor Interface Non-Monitored 575V (MK00737)

  • For all HP - 575V all voltages 1.5 2 3 & 5HP
MP00055

Micanan Track and #410 (#48) Chain for 10' h Door *Actual length 150"*

  • For 1/3 & 1/2 HP Micanan trolley operators
MP00087

Micanan Track and #41 Chain for 7' h Door *Actual length 114"*

  • For 3/4 & 1 HP Micanan trolley operators
PRO-H-5011U-RH

Micanan 1/2HP 115V 1P Hoist Operator N1 Eyes Monitored ECB Right Hand

  • Continuous duty belt drive jackshaft operator with emergency chain hoist
  • Full function Smart 10.0 Logic control board featuring on-board receiver with antenna
  • Nema 1 photoeyes included
  • Solenoid brake OPTIONAL
  • On-Board receiver holds up to 20 transmitters
ST14COP-50

Copper Stop 1/4" 50 Stops per Pkg *price on request

  • Stops ONLY
  • Sleeves sold separately part # SL14COP
MP00056

Micanan Track and #410 (#48) Chain for 12' h Door *Actual length 174"*

MT22-MON-Y-RH

Miller Edge 4-Wire Monitored Pressure Sensitive Edge Yellow Sold per Foot

  • €˘Electromechanical small profile edge for rolling steel foor applicaton. •Touch sensitive signaling allows for immediate stopping or reversing of motion. •The MT22 is completely flexible and will contour to curved surfaces. The MT22 also acts as weatherstrip. •Lead wire: 22 gauge universal •Sensitivity: nominal 6-8 PSI •2 wire NO configuration •Horizontal mount •ANSI/UL325 recognized component •One year warranty
.262-334-L

Cut-to-Length Torsion Spring .262 x 3-3/4" Left Hand Wound Red/Yellow

  • Priced per inch
  • For factory installed cones priced seperately - use part no. C-375-INSTALLED
2807.192.340

Whiting .192 x 2-3/16 x 34" Curbside with Cones

MU22-2WIRE-E-G

Miller Edge MU22 2-Wire End Gray - Sold per Foot

  • €˘Electromechanical edge for sectional doors and aircraft hangars. •The MU22 is a custom edge manufactured to exact specifications. •The MU22 is completely flexible and will contour to curved surfaces. It's profile can also be square rectangular or angled. •Touch sensitive signaling allows immediate reversal or stopping of motion. •Temperature range: -30F to 155F •Lead wire: 22 gauge universal •Sensitivity: nominal 6-8 PSI •Vertical or horizontal mount •ANSI/UL325 recognized component •One year warranty
SL14COP

Copper Sleeve 1/4" 100 Sleeves per Pkg *price on request

  • Oval sleeves ONLY
  • Stops sold separately part # ST14COP
12131

Doorlec Brake Disc 4" x 5/8" Keyway

  • Fits Doorlec model SGOH
41D7742-5

LiftMaster Travel Module Kit 3/4 Hp

  • A one piece travel module replacement kit.
  • Compatible with 3/4HP LiftMaster® Models 8557 & 8587 and various AC chain and belt drive garage door openers
  • Same as 041D7742-5
MOV001

Manaras MOV Surge Protector

  • For 3-phase commercial operators
  • 680V 1800V CL.V
18002

Doorlec Reducer #80

.312-6-L

Cut-to-Length Torsion Spring .312 x 6" Left Hand Wound Yellow

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-600-INSTALLED
838

Skylink Transmitter / Receiver Set Rolling Code ***NLA

  • Generates new code each time you push the button these codes never to be repeated.
  • 99.99% works with most brands of garage door openers.
  • Ideal replacement for older or obsolete models.
  • Electronic scanners "code grabber" cannot duplicate the operating code.
  • Easy to install & program.
  • Works as a secondary receiver (both original existing receiver and 838 receiver will work simultaneously).
  • .......more details
MK00713

Micanan 10K OHM 1/4W Resistor

  • Replaces MK-00694
K76-34740

LiftMaster Limit Passpoint Kit

  • Kit Includes: Learn Limit Switch Learn Limit Nut Limit Shaft Assembly Sprocket and Wire Harness
  • For RSL12V RSL12VH
  • Aslo called Learn Limit Assembly Kit
BL-BAG-1A

Barlock Hardware Bag Only for Doors 12ft and Under

  • Does NOT include the locking bars
  • Up to and including 12ft
  • Kit includes lock spacers and fastereners
9723-48

Whiting Pull Strap 48" with Steel Retainer

  • 48" long
ME00035

Micanan Limit Shaft Light Duty 3/8-1/2 x 8-1/2"

180210

Decorative Pull Handle Aspen-V3 Style 10-1/4" Stamped Steel Sold per piece

  • As seem on carriage house doors
41A6298

LiftMaster Hardware Installation Bag for 3800

RESET008

Manaras Resettable Overload Fuse 11A 1 Phase

FRONTIDLER010

Manaras Front Idler Assembly #41

GRC390/315-3

Heddolf Genie Compatible 390 or 315 MHz 3-btn Transmitter

  • 390 or 315 MHz rolling code compatible 3-Button 3-Channel remote transmitter
  • Works with Genie and Overhead Door openers that utilize a ROLLING CODE 315 or 390 MHz
  • Compatible with Genie model GIC-3 GIT90-3 GIT-3 GIT-3BL G2T-3 G2T-3BL GICT390-3BL ACSGT ACSCTG Type 1 ACSGT Type 1 TBSTG Type 1 Series II Electronics Compatible Remote and B8QACSC
.312-334-L

Cut-to-Length Torsion Spring .312 x 3-3/4" Left Hand Wound Yellow

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-375-INSTALLED
38072020

Tie Down Chain Assembly GR 70 5/16" x 20' Hook / Hook

  • Boron manganese steel heat treated chain
  • Hook on both ends
  • WLL LBS : 4700
39914650

Hitch Pin Forged Wire Handle 7/8" x 6-1/2" Red

  • Usable length is measured between the shoulder and the cotter pin
OCS-PANEL

GDI Panel Buttons Open/Close/Stop N1/ N4 G3253

  • Power LED
JDMG-LG-BBU

GDI Battery Backup Option G3243

  • Battery Backup option for JDMG-LG operator
D-2-6

Keyed Disconnect Device 6ft Cable

  • Operated from the outside to disconnect the trolley for manual operation of the door
  • Must specify if keyed alike is required or keyed random will be shipped
  • Mounting plate dimensions: 2 1/2” x 1 3/32”
Q239

LiftMaster Limit Switch Wire Harness K70-51094 **DISCONTINUED

  • Includes harness and 4 limit switches for Miracle One
6X18PO50

Devanco Loop 6' x 18' pave-over 50' lead-in

  • Ideal for use on with gravel driveways or surfaces that are to be asphalted
  • Features a twisted lead-in to reduce the chances of interference and false detections.
  • Direct burial loops should be buried approximately 6" deep
.243-258-L

Cut-to-Length Torsion Spring .243 x 2-5/8" Left Hand Wound White/Yellow

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-258-INSTALLED
DM518-COATED

Cable Drum Specialty Coated Standard Lift 18' 5250-18 Pair

  • 18' standard lift with special protective coating.
  • Features bimetallic corrosion protection
  • 1000 hr. salt spray performance
  • Abrasion resistant chrome free excellent corrosion protection
  • Pair includes: (1) LH and (1) RH.
  • Color coded: Red=LH and Black=RH
  • .......more details
GAREX-EB-PLATE

Garex End Bearing Plate 3-3/8" Special Order

770

Fasteners Hex Serrated Flange Head Bolt 3/8-16 x 1" 1000/Box

  • Zinc
  • Grade 5
K75-34824

LiftMaster Chain Guard Kit for SL575GL SL585GL SL585U slide gate operators

  • Complete with: Chain Guard Chain Guides and Retainers.
  • Works with SL575GL SL858GL and SL585U
346

Cable Clamps Galvanized 3/16" Sold per piece

  • Galvanized malleable cable clip
PG-K-R50

Prime Guard Monitored Thru-Beam Photoeye Kit 50 ft Range Relay Output

  • Prime Guard's rugged housing is suitable for both indoor and outdoor installations.
  • Dimensions: 5.1" H x 2.8" L x 1.8" W
  • Weight (Em): 12.2 oz. (Em)
  • Weight (Rx): 11.2 oz. (Rx)
  • Aluminum enclosure
  • Mounting options: Wall floor post
  • .......more details
K75-34791

LiftMaster Clutch Kit for SL585

  • Kit includes: Clutch disk Clutch plate Torque Limiter Hub Sprocket Washer E-Rings Nut Bearings and Compression spring
.343-514-R

Cut-to-Length Torsion Spring .343 x 5-1/4" Right Hand Wound Blue/Red

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-525-INSTALLED
  • If cones are required a filler must be added use part # FILLER
MK-318-2

Skylink 2-Button Keychain Transmitter

  • Easy to program.
  • Remove key fob from the car for enhanced security.
  • Compact-size 2-button transmitter can operate two garage doors with GB-318C Garage Door Receiver (sold separately).
  • 3V Lithium battery included.
  • FCC/IC approved.
  • Works Mastercraft made by Skylink
  • .......more details
LVB1020-11

Laminated Bumper Black 10" Projection Vertical Installation 20" x 11" Sold Individually

  • For use in low to medium traffic loading docks in factories and warehouses.
  • Can be used as rub rails at the sides of truck wells
  • Fabric reinforced rubber pads cut from recycled truck tires.
  • Rubber pads laminated between steel angles and secured with 3/4” rods
  • Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
  • Wall mounting hole size is 1” diameter.
  • .......more details
345

Cable Clamps Galvanized 1/8" 100/pkg

  • Galvanized malleable cable clip
21701

Doorlec Limit Switch Single ATM 15 AMP

1104-7FT-LT-BNZ

Residential Side & Top PVC Weather-Strip with cap 7' Long - Light Bronze (F). ***NLA

  • Light bronze rigid vinyl retainer with light bronze flexible vinyl seal.
  • Dual fin vinyl.
  • Comes with cap to hide screws.
60-7254

Wheel Chock Wall Bracket Anchors 4/pkg 3/8" x 1-7/8"

  • Anchors only. Set of 4
PRO-HB-7511U-RH

Micanan 3/4HP 115V 1P Hoist Op. with Brake N1 Eyes Monitored ECB Right Hand

  • Continuous duty belt drive jackshaft operator with emergency chain hoist
  • Full function Smart 10.0 Logic control board featuring on-board receiver with antenna
  • Nema 1 photoeyes included
  • Solenoid brake included
WD-327310

Wayne Dalton 3-Btn Mini Transmitter 372 MHz 3973

  • Keychain Model but also comes with a Visor Clip
  • Homelink Compatible
  • Size: 2-1/2"" x 1-1/2"
  • Works with Wayne-Dalton Models: Classic Drive: 3014 3018 3514
  • Quantum: 3214 3314 3316 3414
  • ALL I-Drive Models
  • .......more details
053158

Rotating Beacon 4" Amber 12-110V DC

  • IP Protection: IP56
  • -30 degree celsius to + 50 degree celsius extreme temperature reliability
  • small format only 2.5" wide
POCKETWHEEL005

Manaras Pocketwheel Opera

SF514U-114

Spring Fitting 5-1/4" Pair for 1-1/4" shaft

  • Universal thread for use in either LH or RH wound springs.
  • Pair includes: (1) winding 1-1/4"bore & (1) stationary 1" bore.
201-300-401-00

Equinoxe Long Range Transmitter O/C/S for 8-Doors 433 MHz Pre-2016

  • Open/Close/Stop remote for 8 doors
  • Range of approx. 1000ft
  • A heavy-duty remote for Industrial applications
  • Old generation- prior to 2016
3-32-1

Low Headroom Top Bracket 2" Residential 1 pc

  • For residential door with 2" track
VFD-MOD

Micanan Variable Speed Modification Up-Charge for VFD Operators

  • Variable Frequency Drive modification for commercial operators
  • Whenever the primary power is 575V must add MX00164 panel
MD-00006

Sprocket 41B10 x 3/4" NO KW 2SS 1/4

36451A

Genie Front Idler Assembly 36451A.S *** No Longer Available

  • Works on ReliaG 800 2022 2024 2042 ReliaG 600 ChainLift BeltLift 1022 1024 and 1042 Series Units
DM518-125

Cable Drum Standard Lift 18' D525-216-125 Pair Torque Force

  • 18' standard Lift aluminum die cast alloy.
  • Pair includes: (1) LH and (1) RH.
  • Color coded: Red=LH and Black=RH
  • Max. Door Height: 18'-1" Rated Lift per Drum: 750 lbs.
  • Max. Cable Diameter: 3/16".
  • Mounting: 1-1/4" solid shaft with 1/4" keyway
  • .......more details
ALUM-801

Aluminum 24" x 100' Spool White / Blanc # 801

  • 20% thicker than the aluminum sold in retail stores (0.022" )
  • Aluminum on the reverse side
  • Gentek # 801
5-30-6

3" Vertical Track 12-GA 11'-4" (12' door) Sold per Pair

  • Pierced track
K20-1050B-2TLP

LiftMaster Electric Motor 1/2 HP 115/230V 1Ph L3 L4 TEFC

.362-278-27-LHW

Cut-to-Length Torsion Spring .362 x 2-7/8 x 27" Left Hand Wound

  • No cones
  • Inside diameter 2-7/8" or 2.875
TAOS141W

Stainless Hinge Tek Screw 1/4" x 1" Self-Driller with Washer

  • Priced per each
H12G12-SS

Hinge #12 x 12 gauge Stainless Steel

  • Manufactured with 12ga. Rust-Resistant Stainless Steel
  • Universal Design
  • Fits Most Overhead Sectional Doors
  • Priced Per Each
82-SB50-08

LiftMaster Shoulder Bolt 3/8"-16x8 **DISCONTINUED

  • Shoulder Bolt
  • For SW470-S3
  • Formerly 82SB5008 G82SB5008
ME123-M-YEL-RH

Miller Edge Yellow RH 4-Wire Monitored 2" wide x 1-1/2" high Sold by the Foot

  • Electromechanical slide in edge for sectional doors and sliding gates.
  • Touch sensitive singaling allows for immediate stopping and reversing of motion
  • Temperature range: -30F to 155F
  • Lead wire: 22 gauge universal
  • Sensitivity: nominal 6-8 PSI
  • 2 wire NO configuration
  • .......more details
1003-4-DF-200FT

Bottom U-Rubber 4" Dual Fin Black 200' Long

  • 200ft spool of vinyl insert.
  • Dual fin
MD-00031

Roller Chain #40 Nickel Plated Sold by the Foot

MGS20-Y-2U-06

Miller Edge Sensing Edge Square Yellow 2-Wire Universal Outlet 6ft Long

  • €˘Electromechanical edge for standard 2" round or square frame sliding sing and bi-part gates. •3-sided activation allows for immediate stopping or reversing of motion •Contours to round or square posts. •Temperature range: -30F to 155F •Lead wire: 18 gauge 2ft length •Sensitivity: nominal 6-8 PSI •2 wrie NO configuration •ANSI/UL325 recognized component •Cannot be bent •One year warranty
T-833-H

FL-Heddolf 3-btn Transmitter 311 MHz ** this model is discontinued

  • Open/Close up to 3 doors or Open/Close/Stop one door
  • Heddolf-Keystone 3 button transmitter 311mhz
  • 8 3-Position dip switch format
  • 9V battery and metal clip included
  • Compatible with Allstar 3 button T-833
  • Same as P220-3K
  • .......more details
MGS20-Y-2U-04

Miller Edge Sensing Edge Square Yellow 2-Wire Universal Outlet 4ft Long

  • €˘Electromechanical edge for standard 2" round or square frame sliding sing and bi-part gates. •3-sided activation allows for immediate stopping or reversing of motion •Contours to round or square posts. •Temperature range: -30F to 155F •Lead wire: 18 gauge 2ft length •Sensitivity: nominal 6-8 PSI •2 wrie NO configuration •ANSI/UL325 recognized component •Cannot be bent •One year warranty
PRO-HBH-7523U-L

Micanan 3/4HP 230V 3P Heavy-Duty Jackshaft N1 Eyes Monitored ECB Left Hand (Pro-HHD)

  • 3/4 HP230V 3PH Industrial Continuous Duty Jackshaft Operator Ideal for Sectional Doors Rolling Steel
  • Monitored logic board with integral 372Mhz radio receiver that can hold up to 20 transmitters (MK-00647/ MK-00653/ MK-00659) or 200 of the 1 channel hand held transmitters (MK-00660).
  • N-1 Through-beam (MK-00649) photocells included. Other options available.
  • 3-btn O/S/C (02-103) wall control station included
  • Adjustable Friction Clutch 5L320 drive belt
  • #50 Roller chain 18 tooth door sprocket included
  • .......more details
053156

Magnetic Mount Micro Dome Beacon Amber ** To Extent of Inventory

  • 60 LEDs 360 degree revolving flash / intermittent flash
  • -30 degree celsius to + 50 degree celsius extreme temperature reliability
MOTOR275

Manaras Electric Motor 1HP 208/460V 3PH

  • Continuous-duty base mount
  • This item is compatible with BRAKE011
ST-ACTIVATOR

Soft Touch Activator

  • Same as ST-PRIMER
  • Used to make the glue dry faster
  • Approx 10 ounces 300ML spray can
CP-BRG-58

Lynx Bearing 5/8"

  • 6 in total on a MCJH
VBELT_5L340

VBelt 5L 34" B31

  • Fits Lynx HDC operator
  • 5/8" x 34"
MK-00511

Micanan Resistor 330 OHM 5Wc/w Leads (For Motor)

ME111-E

Miller Edge Black End Outlet 7/8" wide x 1-1/2" high Sold by the Foot

  • Slide in style edge for barrier gate and counter shutter application.
  • Touch sensitive signaling allows for immediate stopping/reversing of motion depending on application. •Temperature Range: -30F to 155F
  • Lead wire: AWM 22 gauge 2ft length
  • Sensitivity: nominal 6-8 PSI
  • Vertical or horizontal mount
  • ANSI/UL325 recognized component
  • .......more details
20456R

Genie Pulley Support Kit *** No Longer Available

  • Front metal clip with pulley
  • Front idler for use with Genie and Overhead Door T-rail systems
ME111-L

Miller Edge Black Left Hand Outlet 7/8" wide x 1-1/2" high Sold by the Foot

  • Slide in style edge for barrier gate and counter shutter application.
  • Touch sensitive signaling allows for immediate stopping/reversing of motion depending on application. •Temperature Range: -30F to 155F
  • Lead wire: AWM 22 gauge 2ft length
  • Sensitivity: nominal 6-8 PSI
  • Vertical or horizontal mount
  • ANSI/UL325 recognized component
  • .......more details
RA-AD-WKP-05

Lynx 5-btn Wireless Keypad AD455 372 MHz

.306-6-R

Cut-to-Length Torsion Spring .306 x 6" Right Hand Wound Red

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-600-INSTALLED
1005-1-1/2-10'

Aluminum Bottom Retainer U-Shaped 10' Long

  • For door thickness 1-1/2"
DF104.2

Whiting Dry Freight Door 3/4" with Track Balancer and Standard Hardware

  • Standard features include: 2-cable balancer with independent springs
  • Balancer springs treated with rust preventative
  • All door hardware is E-coated
  • Spring loaded lock catch
  • Heavy-duty 2" 13-gauge track
  • Stainless steel aircraft cables
  • .......more details
26966A

Genie Idler Pulley for Stealth Chain Drive

  • Fits Genie Stealth model
  • 1/4” bore
  • Channel style rails
.250-334-L

Cut-to-Length Torsion Spring .250 x 3-3/4" Left Hand Wound Green

  • Priced per inch
  • For factory installed cones priced seperately - use part no. C-375-INSTALLED
.250-334-R

Cut-to-Length Torsion Spring .250 x 3-3/4" Right Hand Wound Green

  • Priced per inch
  • For factory installed cones priced seperately - use part no. C-375-INSTALLED
15-50B35QGH

Sprocket 50B35 1-1/4" Bore 1/4" Keyway

10-10875

LiftMaster Disconnect Lever H MH J **to extent of inventory

12-10882

LiftMaster Copper Bushing

  • 3/4" x 1" x 5/8"