Devanco Canada - Get The Right Garage Door Opener‎ and Parts

2704.148_180

Whiting Roadside Torsion Spring for Cube Truck Roll-Up Doors 18" Long

Most common torsion spring for cube trucks
Specs: .148 x 2-3/16" x 18" Long
For Curbside order part # 2705.148*180

CM30E

Push-to-Exit Button Green

2807.171.200

Whiting Spring Assby .171 x 2-3/16 x 20" L Curbside

Replacement torsion spring with cones
Specs: .171 x 2-3/16" x 20" Long
For Roadside order part # 2806.171.200

ARMP5

LiftMaster DC Power Supply for Intercom/Maglock *** to extent of inventory

218758

Torque Force Spring Failure Device 1-1/4" Shaft Left Hand Side

For springs 2" up to 6"
This device can be applied on Industrial OH doors that are manual or motor operated
Must be installed on a keyed shaft

2376.206.325.910

Whiting Torsion assembly .206 wire size 32-1/2" spring length 91" shaft

2704.206_325

Whiting Roadside Torsion Spring 2-3/16" ID 32-1/2" Long

Torsion spring wire only
.206 wire size

MK-00137

Micanan Transformer 600V-24V-100VA

BCH755L5-RH

LiftMaster Hoist Op. with Carwash Mod. 3/4 HP 575 VAC 3 Ph L5 Right Hand ***Replaced by CRBH755L5-RH

Industrial Duty Hoist Operator with Damp Environment modification
Comes with CPS-UN4 photoeyes
External brake included

DJ501L5

LiftMaster Industrial- Duty Jackshaft Doorlock 1/2HP 115/230V 1Ph ***No Longer Available

Doors used with this operator should be balanced with the ability to be manually lifted by hand in an emergency or power outage.
These operators include a door lock sensor to prevent damage to the door and operator caused by attempts to automatically open a locked door.
The operators are typically mounted to the wall when used with smaller sectional overhead doors with vertical or high lift and mounted to the side or the front of the hood when used with rolling doors and grilles.
DJ operators are attached to the door jackshaft to indirectly drive the door.
MyQ® Technology
Security+ 2.0®

.......more details

TB406-36SF

Steel Faced Laminated Bumper Black 6" x 36" 5 1/4" Projection Horizontal Installation

Used on docks where excessive friction from up and down trailer movement occurs (yard jockeys air ride trailers etc.).
Can be used in material handling application where medium to heavy dock protection is required
“Gliding” heavy-duty steel face is 3/8” thick and independently anchored with elongated holes to face of bumper allowing bumper to compress AND offer high surface abrasion resistance
Rubber pads laminated between steel angles and secured with 3/4” rods
Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
Wall mounting hole size is 7/8” diameter.

.......more details

K75-36914

LiftMaster Electrical Box Cover APT T GT SD GSD GH - L5

K94-36934

LiftMaster Main Wiring Harness L5

1104-8FT-GREEN

Residential Side & Top PVC Weather-Strip with cap 8' Long - Green (R)

Green rigid vinyl retainer with green flexible vinyl seal.
Dual fin vinyl.
Comes with cap to hide screws.

2807.206.325

Whiting .206 x 2-3/16 x 32-1/2" Curbside with Cones

2376.156.17.770

Whiting Torsion assembly .156 wire size 17" spring length 77" shaft

2376.200.30.890

Whiting Torsion assembly .200 wire size 30" spring length 89" shaft

G50-FL120-24

LiftMaster Flexible Red Rope Light 24VAC/DC 10ft ** Discontinued

Flex Red Light Strip for BG770 & BG790 Barrier Gate Operators
24VAC/VDC
10' Long

39913625

Hitch Pin Forged Wire Handle 3/4" x 6-1/4" Red

Usable length is measured between the shoulder and the cotter pin

COOKSON-45-GREY

Rolling Steel Slat 3" Cookson Insulated with Wind Locks

Special order

MOUNTSHAFT016A

Manaras Clutch & Hoist Shaft Kit for Opera-SH Nema 4/12 (OSHW)

Input / clutch shaft kit for Manaras Opera-SH N4/12

2705.192_340

Whiting Curbside Torsion Spring 2-3/16" ID 34" Long

Torsion spring wire only
.192 wire size

BK020/PR

Commercial 2" Safety Bottom Bracket Sold as a Pair (L & R) *** No Longer Available

Maximum cable diameter: 3/16"
Maximum door weight: 1300 lbs Zinc
Plated Steel
Sold as a pair

CABLE008

Manaras Disconnect Cable 25 ft

Cable 3/32"

9301644400

Galvanized Torsion Spring .306 x 3-3/4 x 44" L with Cones RHW

9291644400

Galvanized Torsion Spring .306 x 3-3/4 x 44" L with Cones LHW

H101L5-RH

LiftMaster Ind. Duty Hoist Op. 1 HP 115/230 VAC Logic 5 Right Hand W/Brake ***No Longer Available

Includes CPS-U
H-style operators include a floor level chain hoist to ease manual operation in an emergency or power outage.
The operators are typically mounted to the wall when used with larger sectional overhead doors with vertical or high lift and mounted to the wall or the front of the hood when used with rolling doors and grilles.
H operators are attached to the door jackshaft to indirectly drive the door.
MyQ® Technology enables you to securely monitor and control your facility operator and lights with your smartphone tablet or computer for greater peace of mind.
Alerts can be received as email or pop-up (push) notifications on a mobile device ensuring the status of your commercial door.

.......more details

Installation Manual Manuel d'installation Sell sheet Brochure

UNI-100-162

Uni-Size Bottom Weather Seal 16'2" Long *To extent of inventory*

Fits most standard doors 1-3/8" thru 2" thick
Pliable in all temperatures
Accepts pneumatic or electrical edge
15 pieces per box

UNI-100-102

Uni-Size Bottom Weather Seal 10'2" Long *To extent of inventory*

Fits most standard doors 1-3/8" thru 2" thick
Pliable in all temperatures
Accepts pneumatic or electrical edge
15 pieces per box

MV-00024

Micanan 4-Door O/C/S Transmitter CT-4 313 MHz ** Discontinued

Programming Instructions

GH4416-09-R

Green Hinge #9 12-ga Right Hand *** No longer available

A unique spring-loaded hinge that allows automatic adjustment of the door.
Provides a close tight seal of the door to the building
Green powder coat finish
For doors up to 20ft

GH4416-02-R

Green Hinge #2 12-ga Right Hand *** No longer available

A unique spring-loaded hinge that allows automatic adjustment of the door.
Provides a close tight seal of the door to the building
Green powder coat finish
For doors up to 20ft

GH4416-01-R

Green Hinge #1 12-ga Right Hand ***No longer available

A unique spring-loaded hinge that allows automatic adjustment of the door.
Provides a close tight seal of the door to the building
Green powder coat finish
For doors up to 20ft

SOLID_SHAFT_21'

Solid Shaft 1" Keyed 21 ft Galvanized

Actual length is approx. 21'-1"

SOLID_SHAFT_20'

Solid Shaft 1" Keyed 20 ft Galvanized

Actual length is approx. 20'-1"

SOLID_SHAFT_17'

Solid Shaft 1" Keyed 17 ft Galvanized

Actual length is approx. 17'-1"

SSZP19-1

Solid Shaft 1" Keyed Zinc Plated 19'-1"

SSZP11-1

Solid Shaft 1" Keyed Zinc Plated 11'-1" ** to extent of inventory

K72-16421

LiftMaster Limit Shaft Assembly LGO****Discontinued and no Longer available

Assembly includes: Limit shaft Limit nut Sprocket Roll pin Bushing E-Ring and Chain.

Installation Manual

Q400-D

LiftMaster Circuit Board Assembly with Reset (Q400E)

MDRG

Linear 1-Channel MegaCode Gate Receiver 318 MHz *** Discontinued

Activates one gate or device
Supplied with F-connector and whip antenna
Mounting bracket supplied
Memory: storage for up to 40 MegaCode transmitters
Power: 24 VAC/VDC
Codes: 1000000+ (MegaCode format)

.......more details

Programming Instructions

.225-2-R

Cut-to-Length Torsion Spring .225 x 2" Right Hand Wound Orange/Green

Priced per inch - cones sold seperately
For factory installed cones use part no. C-200-INSTALLED

7001-14-W/B

Commercial Side & Top Weather-Strip 14' Long - White and Black (WB)

White galvanized steel with black dual fin vinyl.
Commercial and Residential use.
Steel is notched on both ends for easier installation.
Full case quantity only (10)

23-2015

Limit Switch DPDT 15A 125/250VAC (K23-2015) *** No Longer Available

K001A6424-2

LiftMaster Circuit Board Assembly Kit 2008 315 MHz *** No longer available

Replacement circuit board for Medium-Duty Logic Commercial Operators
Used on models MJ MH MHS MT BMT and MGJ (non- UL325 compliant operators)
315 MHz intergral radio receiver accepts 20 Sec+ remotes or unlimited dip switch

Installation Manual

RADIO-31

Manaras MCR-32 Open/Stop/Close 24V receiver Nema 4/12 313 MHz *** Repl. by RADIO-RE901B

3-Channel O/C/S receiver controls one operator with MCT series transmitters.
Steel Nema 4 enclosure.
24 VAC input voltage.
2 N/O and one N/C relay
Commercial antenna Included (Radio029).

Programming Instructions - ECB Programming Instructions - CONT

26-40037

Truck Door Offset U-Channel Seal Retainer 96" Long for Whiting DryFreight Doors *** To extent of inventory

Aluminum extrusion construction.
Retainer is offset to allow header clearence with seal when door is in open position.
For use with offset bottom seal #26-40040
Cross Reference: W #8280

HD8460-138

T-Handle Cable Lock System 1-3/8" ***Use HD8460-200 instead***

Complete cable locking system for 1-3/8" door.
System Includes: Auto Latch Striker Keeper T-Handle keyed with 4" shaft Inside Release Handle 3/32" cable and all required hardware.

CBB316

Stop & Sleeve 3/16" 100 pair

Includes 100 stops and 100 oval sleeves

CBB125

Stop & Sleeve 1/4" 100 pair

Includes 100 stops and 100 oval sleeves

1224-1-5/8"-BLK

Elton Commercial Window for Flush Doors 1-5/8" thick 1224 Black Frame Sealed Glass

Screw together window kit
Thermal window
Frame size: 25-1/8" x 13-1/8"
Cut-out size: 24-1/16" x 12"
Vision area: 21-11/16" x 9-5/8"
Different glass options and frame colours are available upon request

.......more details

.225-134-R

Cut-to-Length Torsion Spring .225 x 1-3/4" Right Hand Wound Orange/Green

Priced per inch - cones sold seperately
For factory installed cones use part no. C-134-INSTALLED

GH4416-01-L

Green Hinge #1 12-ga Left Hand *** No longer available

A unique spring-loaded hinge that allows automatic adjustment of the door.
Provides a close tight seal of the door to the building
Green powder coat finish
For doors up to 20ft

.468_6"-RH

Torsion Spring .468 x 6" x 12ft RH Blue/Orange **NLA

Wire size: .468
Inside diameter: 6"
Length: 12 ft

GH4416-08-R

Green Hinge #8 12-ga Right Hand *** No longer available

A unique spring-loaded hinge that allows automatic adjustment of the door.
Provides a close tight seal of the door to the building
Green powder coat finish
For doors up to 20ft

PRECUT-GALV

Special Order Pre-Cut Galvanized Spring Made to Order

K40-35246-2

LiftMaster Warning Sign Kit English Pack of 10

UL325 requires that ALL installations MUST have warning signs placed in plain view to warn pedestrians of the dangers of motorized commercial door access systems

PDC300-1-125-40-20-CH

Pulse300 Direct Drive Opener 1 HP 110/240V 1ph 1.25" Shaft 40:1 20' Cable ** Price by Quote Only

Advanced speed control: up to 24"/s opening up to 16"/s closing
Built-in 24V 9Ah battery backup
Soft start/stop functionality
Universal single-phase power compatibility: 110-240V 50/60Hz
Adjustable force monitoring
Programmable closing timer: 1-99s A high-performance direct-drive door operator with a 90V DC horsepowerrated motor engineered for balanced commercial and industrial doors

.......more details

PDC-300-100-1.25-40/75-20-CH

Pulse 300 Direct Drive Opener 3/4 HP 1.25" shaft 110/240V 1ph 40:1 20' Cable

Advanced speed control: up to 24"/s opening up to 16"/s closing
Built-in 24V 9Ah battery backup
Soft start/stop functionality
Universal single-phase power compatibility: 110-240V 50/60Hz
Adjustable force monitoring
Programmable closing timer: 1-99s A high-performance direct-drive door operator with a 90V DC horsepowerrated motor engineered for balanced commercial and industrial doors

.......more details

PDC-300-075-1.25-40-20-CH

Pulse 300 Direct Drive Opener 3/4 HP 1.25" shaft 110/240V 1ph 40:1 20' Cable ** Price by Quote Only

Advanced speed control: up to 24"/s opening up to 16"/s closing
Built-in 24V 9Ah battery backup
Soft start/stop functionality
Universal single-phase power compatibility: 110-240V 50/60Hz
Adjustable force monitoring
Programmable closing timer: 1-99s A high-performance direct-drive door operator with a 90V DC horsepowerrated motor engineered for balanced commercial and industrial doors

.......more details

PDC-300-050-1-40/63-20

Pulse 300 Direct Drive Opener 1/2 HP 1" Shaft 110/240V 1ph 40:1 20' Cable

Advanced speed control: up to 24"/s opening up to 16"/s closing
Built-in 24V 9Ah battery backup
Soft start/stop functionality
Universal single-phase power compatibility: 110-240V 50/60Hz
Adjustable force monitoring
Programmable closing timer: 1-99s A high-performance direct-drive door operator with a 90V DC horsepowerrated motor engineered for balanced commercial and industrial doors

.......more details

RXTA-100

Pulse 2-Channel Receiver

Two-Channel Receiver: Can be programmed to operate one or two doors or for Open/Close or Open/Stop functions.
Universally Adaptable: Works with most available brands/models of transmitters (300-390MHz) including those with rolling code.
9-30Vac/dc input.
FCC approved.

2806.177*250

Whiting Spring Assby .177 x 2-3/16 x 25" Roadside

Replacement torsion spring with cones
Specs: .171 x 2-3/16" x 25" Long
Roadside
For Curbside order part # 2807.177*250

2807.177*340

Whiting Spring Assby .177 x 2-3/16 x 34" Curbside

Replacement torsion spring with cones
Specs: .177 x 2-3/16" x 343" Long
For Roadside order part # 2806.177.340

8086.207.320

Whiting .207 x 2-5/8 IN x 32" Roadside with Cones

An original Whiting assembly

CEDO-SPEC-ORDER

Cedo Special Order ** non-stocking items

specify size color details when ordering
Please call for pricing

26116

Doorlec Cam Retainer Plate Waterproof

2376.156.145.550

Whiting Torsion assembly .156 wire size 14-1/2" spring length 55" shaft

2704.156_180

Whiting Roadside Torsion Spring for Cube Truck Roll-Up Doors 18" Long

Most common torsion spring for cube trucks
Specs: .156 x 2-3/16" x 18" Long
For Curbside order part # 2705.156*180

CDOPCK

LiftMaster 850LM with 5 x 813LM Remotes

K18-10931

LiftMaster Compression Spring

Also known as: 187009 G187009 1810931 18-10931 18-7009

URBAN-R12

Garex Ready to Install Door Special Order

R12 Insulation - Woodgrain with 1 narrow shadow line at the top and bottom of each panel - Available in steel white or black - A variety of decorative windows can be added - Custom colours can be factory painted - Multiple hardware configurations are available to accomodate site requirements

2376.192.29.910

Whiting Torsion assembly .192 wire size 29" spring length 91" shaft

This is a full balancer assembly

MH00019

Micanan Precision Bearing 3/8" ID ** Replaced by MH00096

2806.206.325

Whiting .206 x 2-3/16 x 32-1/2" Roadside with Cones

BTM-BK-PCG/PR

Powdercoated Commercial 3" LHR Bottom Brackets Grey Sold as a Pair (L & R) *** No Longer Available

EZ123 UPWARDOR
Powdercoated grey
Use with: 3" straight track
Sold as a pair (includes one left and one right).

2807.139*130

Whiting Spring Assby .139 x 2-3/16 x 13" L Curbside

Replacement torsion spring with cones
Specs: .139 x 2-3/16" x 13" Long
For Roadside order part # 2806.139.130

MP-00002-575V

Micanan Apartment Feature: Timer-to-Close Function and Light Control Modification only

Controlling action of two lights- sockets supplied on cover

2376.177_27.830

Whiting Torsion assembly .177 wire size 27" spring length 83" shaft

2376.206.30.930

Whiting Torsion assembly .206 wire size 30" spring length 93" shaft

SOLID_SHAFT_13'

Solid Shaft 1" Keyed 13 ft Galvanized

Actual length is approx. 13'-1"

9372263800

Square Torsion Spring .375 x 6 x 38" with Cones LHW 1-1/4" Bore

ZT37028235

Firestar Shutter 540 Galv with Lock & Key

CBB332

Stop & Sleeve 3/32" 100 pair

Includes 100 stops and 100 oval sleeves

H505L5-LH

LiftMaster Ind. Duty Hoist Op. 1/2 HP 575 VAC 3 Ph Logic 5 Left Hand **No Longer Available

Includes CPS-U
H-style operators include a floor level chain hoist to ease manual operation in an emergency or power outage.
The operators are typically mounted to the wall when used with larger sectional overhead doors with vertical or high lift and mounted to the wall or the front of the hood when used with rolling doors and grilles.
H operators are attached to the door jackshaft to indirectly drive the door. Connectivity
MyQ® Technology enables you to securely monitor and control your facility operator and lights with your smartphone tablet or computer for greater peace of mind.
Alerts can be received as email or pop-up (push) notifications on a mobile device ensuring the status of your commercial door.

.......more details

Installation Manual Manuel d'Installation Sell sheet Brochure

GTS-16

Garaga Top Seal Single-Fin Black 16ft ** To Extent of Inventory

Thermoplastic resin weatherseal co-extruded.
For Commercial / Residential applications
Screws directly to the top of door no retainer required

SOLID_SHAFT_9FT

Solid Shaft 1" Keyed 9 ft Galvanized

Actual length is approx. 9'-1"

.468_6"-LH

Torsion Spring .468 x 6" x 12ft LH Blue/Orange. **NLA

Wire size: .468
Inside diameter: 6"
Length: 12 ft

2376.156.17.730

Whiting Torsion assembly .156 wire size 17" spring length 73" shaft

PDC-300-050-1-40/63-20-CH

Pulse 300 Direct Drive Opener 1/2 HP 1" Shaft 110/240V 1ph 40:1 20' Cable

Advanced speed control: up to 24"/s opening up to 16"/s closing
Built-in 24V 9Ah battery backup
Soft start/stop functionality
Universal single-phase power compatibility: 110-240V 50/60Hz
Adjustable force monitoring
Programmable closing timer: 1-99s A high-performance direct-drive door operator with a 90V DC horsepowerrated motor engineered for balanced commercial and industrial doors

.......more details

PDC-300-050-1.25-40/75-20

Pulse 300 Direct Drive Opener 1/2 HP 1.25" shaft 110/240V 1ph 40:1 20' Cable

Advanced speed control: up to 24"/s opening up to 16"/s closing
Built-in 24V 9Ah battery backup
Soft start/stop functionality
Universal single-phase power compatibility: 110-240V 50/60Hz
Adjustable force monitoring
Programmable closing timer: 1-99s A high-performance direct-drive door operator with a 90V DC horsepowerrated motor engineered for balanced commercial and industrial doors

.......more details