Devanco Canada - Get The Right Garage Door Opener‎ and Parts

5001-10-BRONZE

Residential Side & Top Weather-Strip 10' Long - Bronze (FF)

Painted aluminum retainer with flexible dual fin vinyl.
Residential use.
Sold by full case quantity (20)

5-30-4

3" Vertical Track 12-GA 9'-3" (10' door) Sold per Pair

Punched track .102 x 112"

K72-12532

LiftMaster Output Shaft Kit J

Also known as: 308116010J 310-116010J 308116010JK 310116010J
Compatible with LiftMaster® Model J Commercial Door Operators

CAPXSTK

LiftMaster Trim Kit for CAPXS

Trim plate exclusively for installing with Model CAPXS – Smart Video Intercom S
Provides a clean aesthetic installation helping hide remnants of a previous installation.

50018

Doorlec Photo Switch Polarized Explosion Proof Reflective w/Round Reflector

Class 1 Div 1 Groupes CDEFG explosion proof Certified CSA

ZAP-8800-3-PB

Zap Control Box Assembly for ZAP8800 ***QUOTE ONLY

TDC1222-18

Liftmaster Comm. 18FT Trolley Angle set (10-5818-P x 2) and #41 chain pack (TDC41-18) ***Actual length 251"***

Double Angle Rails for doors up to 18'6" high
Includes #41 chain pack

GALV-375-334-144-L

Torsion Spring .375 x 3-3/4" x 12ft LH Galvanized Yellow/Green

Wire size: .375
Inside diameter: 3-3/4"
Length: 12 ft
Galvanized

GALV-250-258-144-L

Torsion Spring .250 x 2-5/8" x 12ft LH Galvanized Green

Wire size: .250
Inside diameter: 2-5/8"
Length: 12 ft
Galvanized Stenciled

ADAPTER008

Manaras XPL-P16 Thread Bushing

SPR50B42X1

Sprocket 50B42 1" shaft 1/4" KW

42 tooth sprocket for #50 chain

25130

Doorlec Seal Oil CR6372

2806.156.170

Whiting .156 x 2-3/16 x 17" Roadside with Cones

2376.162.18.920

Whiting Torsion assembly .162 wire size 18" spring length 92" shaft

DC-ADAPT125-100

Dyna-Hoist DC Series Adaptor 1-1/4" to 1"

MA033

LiftMaster Hardware Kit Only for Articulating Arm ** Arm Not Included

Hardware kit for articulating arm models MA024 and MA034
Articulating arm hardware kit
Arm sold separately

41D9018

LiftMaster Cover Only for 8155W 8164W 8165W

For use with various LiftMaster® WiFi Chain Drive Garage Door Openers

2376.200.30.870

Whiting Torsion assembly .200 wire size 30" spring length 87" shaft

2704.148_140

Whiting Roadside Torsion Spring for Cube Truck Roll-Up Doors 14" Long

Most common torsion spring for cube trucks
Specs: .148 x 2-3/16" x 14" Long
For Curbside order part # 2705.148*140

SC-25X15-78-W

Thermal Window 25" x 15" for 7/8" thick Steel Craft Door White

For 7/8" thick door

TRANSF168

Manaras Transformer 480X600-240V 60HZ 1500VA Leads Rapido

480X600-240V 60HZ 1500VA LEADS

DHJ751L5-RH

LiftMaster Ind. Duty Hoist/Jackshaft Op. 3/4 HP 115/230 VAC Logic 5 Right Hand***Discontinued

Industrial-Duty Hoist/Jackshaft Operator with Internal Door Lock Sensor
Optimal for shopping mall applications with heavier rolling doors and grilles.
Provides a floor level chain hoist to ease manual operation in an emergency or power outage.
Includes a door lock sensor to prevent damage to the door and operator caused by attempts to automatically open a locked door.
Industrial Ball Bearings on 1" Output Shaft
Second Floor-Level Disconnect for Manual Lifting in an Emergency

.......more details

CG-HOIST-SGLE-114

ControlGard Chain Hoist Single Compound 1-1/4" Bore

Cornell Single Compound hoists are designed for smaller doors
Features an integral braking system that only moves when the user is actively pulling the chain

2376.162_20.780

Whiting Torsion assembly .162 wire size 20" spring length 78" shaft

2807.162.220

Whiting .162 x 2-3/16 x 22" Curbside with Cones

80352.4200

Todco Nut Hex 1/4"-20 PLTD

ZAP-8830

Zap Battery Backup 8030/8830 *** QUOTE ONLY

8830 Battery Back up systems allows operation of the operator during power outages.

2376.177.25.930

Whiting Torsion assembly .177 wire size 25" spring length 93" shaft

50175

Doorlec Adjustable Torque Limiter GT/GH Models 3HP Operators

Also known as Friction Clutch

1440-1-3/8"-WHT

Elton Residential Window for Flush Doors 1-3/8" thick 1440 White Frame Sealed Glass

Screw together window kit
Thermal window
Frame size: 42 5/16” x 14 1/4"
Cut-out size: 41 11/16” x 13 11/16”
Vision area: 39 11/16” x 11 5/8”
Different glass options and frame colours are available upon request

.......more details

59174.0265X91-1/4

Todco Original Counterbalance Assembly Special Order Price by Quote Only

Made to Order for Serial #30662431-1

200722

Torque Force Extension Bracket for Spring Failure Device Short

Zinc Plated Steel bracket
Use with 1" or 1-1/4" SFSD device
Includes M10 nuts and bolts
Dimensions: L=2.9" OFFSET = 4:3/8" and 5"

2704.187_30

Whiting Roadside Torsion Spring.187 wire 2-3/16" ID 30" Long

Torsion spring wire only
.187 wire size

ETBHW-311-3/4

Doorlec 3/4 HP 115V-1Ph Waterproof Trolley OP

EHJW-353-1

Doorlec Ind Jackshaft Op. Watertight ECB 1 HP 575V-3Ph

Heavy-Duty Industrial Operator with Waterproof Mod. for Sectional or Rolling Steel Doors
DC-2000 logic with adjustable Timer-To-Close Delay On Reverse and Traffic Light Control (monitored board optional)
Solenoid Brake prevents coasting and secures the door when closed
TEFC (sealed) continuous duty electric motor with overload protection
Automatic Friction Clutch protects the door and operator
Self-aligning Heavy Duty sealed Pillow Block bearings on all shafts for high cycle applications

.......more details

EHJW-321-1/2

Doorlec Ind Jackshaft Op. Watertight ECB 1/2 HP 230V-1Ph

Heavy-Duty Industrial Operator with Waterproof Mod. for Sectional or Rolling Steel Doors
DC-2000 logic with adjustable Timer-To-Close Delay On Reverse and Traffic Light Control (monitored board optional)
Solenoid Brake prevents coasting and secures the door when closed
TEFC (sealed) continuous duty electric motor with overload protection
Automatic Friction Clutch protects the door and operator
Self-aligning Heavy Duty sealed Pillow Block bearings on all shafts for high cycle applications

.......more details

50170

Doorlec Adjustable Torque Limiter GT/GH Models 3/4HP up to 2HP Ops

Also known as Friction Clutch

SSZP14-6-114

Solid Shaft 1-1/4" Keyed 14' 6" Zinc Plated

Actual length is approx. 14'-6"

B/CDJH-12-115-ECB

Lynx CDJH HD Jackshaft with Solenoid Brake 1/2 HP 115V with ECB UL325

New LX100 circuit board.
Built-in 3-channel 372 Mhz radio receiver accepts up to 20 remotes
4L V-belt primary reduction #41 drive chain and sprockets.
Adjustable friction clutch Inherent Mechanical Brake included
Solenoid brake
Fully driven adjustable limit switches.

.......more details

O18R1003

AirLift Safety Eye Kit Telco

BCH501L5-LH

LiftMaster Hoist Op. with Carwash Mod.and Brake 1/2 HP 115/230 VAC Logic 5 Left Hand ***Replaced by CRBH501-LH

Industrial Duty Hoist Operator with Damp Environment modification.
Comes with CPS-UN4 photoeyes and brake

TRACK-SET-3-134-12

3" Tracks Set 12'-0" Torsion 1-3/4" Door Clips for Wood Frame 15" Radius *** By quote only

P40-10PFO

Hand Crank Reducer 107174

D-2-6-KA

Keyed Disconnect Device 6ft Cable Keyed Alike (Special Order)

Operated from the outside to disconnect the trolley for manual operation of the door
Must specify if keyed alike is required or keyed random will be shipped
Mounting plate dimensions: 2 1/2” x 1 3/32”

510.4302.05

Whiting Stainless Steel Interior Hdwr Pkg 4 Rows Hinges 5 Panel

This is an Add-On option when buying a truck door

K13-36117-1

LiftMaster Cludge Cover for RSW CSW

Protects cludge assembly
Hard cover sloped front beveled edges
Compatible with LiftMaster RSW12UL CSW24UL

41A6288

LiftMaster Work Light Hardware Kit

2376.192.325.930

Whiting Torsion assembly .192 wire size 32-1/2" spring length 93" shaft

This is a full balancer assembly
Twin springs one road one curb with a shaft through it

41B7418

LiftMaster Wire Harness Dual Light

Wire Harness Replacement Kit.
For use with various LiftMaster® and Chamberlain® Garage Door Openers; manufactured 2005 to 2013 that feature a dual light system

GX-138-S-R12

Garex Ready to Install Door Special Order

R12 Insulation - Woodgrain with 2 wide shadow lines at the top and bottom of each panel - Common commercial profile - Available in steel white and black - A variety of decorative windows can be added - Custom colours can be factory painted - Multiple hardware configurations are available to accomodate site requirements

K75-32268

LiftMaster Electrical Box Cover L3 **DISCONTINUED

K77-16011

LiftMaster Hardware Kit for CPS N4

This is a replacement Sensor Hardware Kit only.

2376.206.30.870

Whiting Torsion assembly .206 wire size 30" spring length 87" shaft

2705.135.140

Whiting Curbside Torsion Spring 2-3/16" ID 14" Long

Torsion spring wire only
.135 wire size

.289_3-3/4"-RH

Torsion Spring .289 x 3-3/4" x 12ft RH

Wire size: .289
Inside diameter: 3-3/4"
Length: 12 ft

.192_2-3/16_60L

Truck Door .192 x 2.188 x 60 CTD RAW LHW

.192 x 2-3/16 x 12'

CB1805000-KOR

Cable 1/8" 7x19 5000' Galvanized Supreme ** Price on request

Galvanized Cable 1/8" 7x19 5000ft spool.
Cable break strength: 2000 lbs
A higher quality cable compared to the Chinese cable.
Meets endurance test requirements of over 35000 work cycles
Lubricated for flexability and longer service life

Stainless Steel Cable Specifications

7001-7-D/TAN

Commercial Side & Top Weather-Strip 7' Long - Desert Tan 7001-DT

Desert tan galvanized steel with desert tan dual fin vinyl.
Commercial and Residential use.
Steel is notched on both ends for easier installation.
Also known as Taupe
Full case quantity only (20)

K75-19981

LiftMaster Arm Kit Model H/HJ

Compatible with LiftMaster® Models H and HJ Commercial Door Operators

K081C0168

LiftMaster Screw Drive Rack

Also known as: 081C0168 81C168
This replacement screw drive rack is not compatible with LiftMaster® Models 3130 or 3240

22010

Doorlec 1-22mm Cylinder Complete with Normally Open Contact Spring Return Includes 2 keys

GAL.262-258-144R

delete

SF175-W

Spring Fitting 1-3/4" Winding Side Only 1" shaft

10.1002.3

Truck Door Rivet with Splines 1/4" x 1" Steel

Mild steel construction
Round head design 3/4" head
Standard hinge rivet

K72-12591

LiftMaster Clutch Shaft Kit HMJ

GATE_RN3.5

Nylon Gate Roller for Cantilever Gate

VPL-12

Autogate 12V Motor

MOUNTSHAFT018E

Manaras Limit Shaft Kit For Damp/Corrosive Env.

For operators with W or C Modification

SGP-321-1-230/1

Doorlec Gate Master 1 HP 230V 1 Phase with Heater and Lights in Cabinet

Post mount heavy-duty industrial slide gate operator
Max. gate weight: 2500 lbs
Gate travelling speed: 45 ft / minute
175 watt heater included

Technical Information Sheet Fiche Technique Electrical Diagram Diagrammes Electriques

2376.177_25.900

Whiting Torsion assembly .177 wire size 25" spring length 90" shaft

14219

Doorlec Disconnect Arm LJH

111421.0004

Overhead Limit Module

2807.148.180

Whiting .148 x 2-3/16 x 18" Curbside with Cones

218757

Torque Force Spring Failure Device 1" Shaft Left Hand Side DT0054 126474

For springs 2" up to 6"
This device can be applied on Industrial OH doors that are manual or motor operated
Must be installed on a keyed shaft
The both in the Euro model is metric only difference from 218757

PRO-HB-7525U-LH

Micanan 3/4HP 220V 1P Hoist Op. with Brake N1 Eyes Monitored ECB Left Hand

Continuous duty belt drive jackshaft operator with emergency chain hoist
Full function Smart 10.0 Logic control board featuring on-board receiver with antenna
Nema 1 photoeyes included
Solenoid brake included

2705.206_325

Whiting Curbside Torsion Spring 2-3/16" ID 32-1/2" Long

Torsion spring wire only
.206 wire size

CLIP020

Manaras Pocketwheel Roller Clip

MK-00703

Micanan Harness 1-Phase 5-Relay Board

.437-334-R

Cut-to-Length Torsion Spring .437 x 3-3/4" Right Hand Wound Red/Green

Priced per inch - cones sold seperately
For factory installed cones use part no. C-375-INSTALLED

.312-258-R

Cut-to-Length Torsion Spring .312 x 2-5/8" Right Hand Wound Yellow

Priced per inch - cones sold seperately
For factory installed cones use part no. C-258-INSTALLED

.306-514-L

Cut-to-Length Torsion Spring .306 x 5-1/4" Left Hand Wound Red

Priced per inch - cones sold seperately
For factory installed cones use part no. C-514-INSTALLED

.295-514-L

Cut-to-Length Torsion Spring .295 x 5-1/4" Left Hand Wound Blue

Priced per inch
For factory installed cones priced seperately - use part no. C-514-INSTALLED

PRO-TB-5043-U

Micanan 1/2HP 460V 3P Trolley Operator with Brake N1 Eyes Monitored ECB

Designed for use on commercial / industrial sectional overhead doors with standard lift tracks.
#410 roller chain on 1/2 HP models
Monitored board

LB410-24SF

Steel Faced Laminated Bumper Black 10" x 24" 4" Projection Horizontal Installation

Used on docks where excessive friction from up and down trailer movement occurs (yard jockeys air ride trailers etc.).
Can be used in material handling application where medium to heavy dock protection is required
“Gliding” heavy-duty steel face is 3/8” thick and independently anchored with elongated holes to face of bumper allowing bumper to compress AND offer high surface abrasion resistance
Rubber pads laminated between steel angles and secured with 3/4” rods
Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
Wall mounting hole size is 7/8” diameter.

.......more details

LVB636-11

Laminated Bumper Black 6" Projection Vertical Installation 36" x 11" Sold Individually

For use in low to medium traffic loading docks in factories and warehouses.
Can be used as rub rails at the sides of truck wells
Fabric reinforced rubber pads cut from recycled truck tires.
Rubber pads laminated between steel angles and secured with 3/4” rods
Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
Wall mounting hole size is 7/8” diameter.

.......more details