Devanco Canada - Get The Right Garage Door Opener‎ and Parts

2705.177_13.5

Whiting Curbside Torsion Spring 2-3/16" ID 13-1/2" Long

Torsion spring wire only
.177 wire size

70598.000

Todco 1" Nylon WondeRoller

Special Order Item
Perfect for dry freight applications this roller has been tested to last 5 - 10x longer than a standard roller.
A fully sealed bearing to keep dust and debris out
2 Inch Track WonderRoller is a nylon-coated-stem track roller for larger application panel truck doors
Polymer vinyl roller head couples with this stem to suit the constant up-and-down and roadway jostling on a freight or other large truck
Roller prevents build up in bearings with a sealed external washer

.......more details

12-1009

PVC Strip 6" x .060 Standard Clear Smooth for Replacement Strip Curtain Sold per Foot

Suitable for most average applications.
Temperature Range: -20°F to 150°F (-28° C to 66° C).
Formulated with ingredients that meet USDA requirements for incidental food contact.

BPFL205

Bearing Flangette Retainer Only PFL-205 2-Hole

Does not include bearing
Steel Zinc plated finish

PROBE-200

EMX CARSENSE-101 Direct Burial Probe with 200' Lead Wire

Wand only
Requires CS101 (Carsense-101)

OMT-6112-MON-N1

Manaras Medium-Duty Trolley Operator 1/2 HP 120V with Elect. Circuit Board Monitored N1 Eyes

Designed for use on smaller and low-cycling industrial standard lift sectional doors.
It features a high starting torque intermittent-duty industrial type motor and a quick release disconnect arm.
Equipped with the new Electronic Control Board (BOARD 070) with N1 photoeyes
Maximum Door Height: 14' (4260 mm)
Back Room: door height + 3'11" (1175 mm)
Head Room For Tracks: 5" (127 mm) above the highest point of door travel

.......more details

HAE00052

Linear Main Cover LDCO

Replacement cover only

Replacement Parts List

Q277

LiftMaster Wiring Harness Kit DC2000 K94-50262****no longer available

Compatible with LiftMaster® Models SL3000 and CSW200 Perimeter Access Systems

11442

Limit Switch w/Roller Wheel Lever for MBAR

Used on M7BAR Ops

GALV-218-2-144-L

Torsion Spring .218 x 2" x 12ft LH Galvanized Yellow/Orange

Wire size: .218
Inside diameter: 2"
Length: 12 ft
Galvanized Stenciled

GALV-262-258-R

Cut-to-Length Torsion Spring .262 x 2-5/8" Right Hand Wound Galvanized Red/Yellow Price per Inch

Priced per inch - cones sold seperately
For factory installed cones use part no. C-258-INSTALLED

GALV-234-2-RH

Cut-to-Length Torsion Spring .234 x 2" Right Hand Wound Galvanized Price per Inch

Priced per inch - cones sold seperately
For factory installed cones use part no. C-200-INSTALLED

TRACK005

Manaras 1 Piece Galv Track 2x2x16'6 ** 1 pc Only

2 pices are required to make 1 set of tracks
Does NOT include the chain

RS36203

Roller 3" Steel Roller Head Only Heavy-Duty 6203 Bearing 5/8"

Steel Roller Wheel diameter: 3"-C 6203 bearing
Roller Head Only

BEARING058

Manaras Needle Roller Thrust Bearing 1" ID

1-9/16" OD 5/64" Width
Replaces BEARING025

MR00001

Micanan Brake Disconnect Cable 3/32" x 12" Long

DAK-2ULT-MVP

EMX Drive Thru Alert Kit Chime/Strobe Pre-Wired Enclosure *** Price by Quote Only

Kit includes: 2x EMX ULT-MVP Vehicle Detectors with LD-11 Connectors
2x EMX PR-46-100 Induction Loops
1x SLM500B LED Beacon and Sounder with SLMBW-012-024GY Wall Mount Bracke
1x 120VAC to 24 VDC Power Supply
1x NEMA 1 Junction Box (wall mounting hardware not provided)

Spec Sheet - DAK-2ULT-MVP Quick Start Guide -DAK-2ULT-MVP ULT-MVP Manual Detect On Stop

OTBH-6113-1-M-N1

Manaras Trolley Operator 3/4HP 120V 1Ph Monitored w/N1 Eyes

Heavy-duty low headroom trolley operator designed for use on industrial standard lift sectional door
25 cycles per hour 80 cycles per day
It incorporates a drum-band type solenoid brake.
Tracks are an extra 36 lbs per track
3/4 HP & 1 HP operators come with #41 full roller chain
Includes PHOTO-070

.......more details

K41-0245-000

LiftMaster BLDC Power/Motor Drive Board IHSL24UL

Replacement Brushless DC Power/Motor Drive Board Service Kit
Compatible with the following models: INSL24UL INSL24ULMC

50304

Doorlec Hoist Shaft Kit w/Disconnect Coupler

For models LJH LJHW

16-2101

LiftMaster Vbelt 3L 25" 3L250 *** NLA

This is a replacement Belt (3L250).
Compatible with LiftMaster® Model SW470GL Swing Operators
Also know as: K16-2101 G162101 162101

ME120-B-4E-P/FT

Miller Edge Sensing Edge Black 4-Wire Monitored End Outlet Sold per Foot

Electromechanical slide in edge with a small profile for motorized gates and doors rolling shutters and pinch point protection applications.
Touch sensitive signaling
Temperature range: -30F to 155F
Lead wire: 18 gauge 2ft length
Sensitivity: nominal 4 PSI
2 wire NO configuration

.......more details

PRO-GHC-15011U-L

Micanan 1.5 HP 115V 1P Gearhead Operator with N1 Eyes Monitored ECB Left Hand

External radio control terminal strip
Heavy duty worm gear reduction in oil bath gearbox
Solenoid brake standard
#50 roller chain and sprockets on final drive
Emergency chain hoist with electrical cut-out switch for manual operation
Full function Smart 10.0 logic board and on-board receiver

.......more details

HCT12

LiftMaster HCT Rail Only 12'

Yellow zinc dichromate premium rail finish offers maximum rust protection in open-air environments.
Heavy-duty 12-gauge C channel corrosion resistant steel track.
This DOES NOT include the head unit
Will open a standard sectional door 11'6" high

SMR7620TP5

Telco Thru Beam Receiver M18

Supply voltage: 10 - 30 V dc
Control Feature: Sensitivity pot. and light/dark switch
Sensing range: 20 m
Output Status: N.C./N.O.
Housing: 18 x 1 Plastic
5M cable

.......more details

7-6137

Richard-Wilcox 1x#31 Lock Joint Clip

Used with #461-0004 track

OSH-6213-CONT-LH

Manaras Opera-SH 3/4 HP 240V 1Ph Contactor Left Hand

An ultra high-end heavy-duty V-belt drive industrial jackshaft operator
For use on Standard High and Vertical Lift sectional doors
Can also be used on Rolling doors and Grilles
Comes with a chain hoist for manual operation and a floor level engaging device
Clearence: side room required 16"
25 cycles per day > 100 cycles per day

.......more details

Installation Manual

OSH-6213-CONT-RH

Manaras Opera-SH 3/4 HP 240V 1Ph Contactor Right Hand

An ultra high-end heavy-duty V-belt drive industrial jackshaft operator
For use on Standard High and Vertical Lift sectional doors
Can also be used on Rolling doors and Grilles
Comes with a chain hoist for manual operation and a floor level engaging device
Clearence: side room required 16"
25 cycles per day > 100 cycles per day

.......more details

Installation Manual

RDOF-311-1/2

Doorlec RDOF Rolling Curtain Fire Door Op. Compact Design w/ECB 1/2 HP 115V 1PH

Comes with Mounting Plate for Front of Hood Mount

51115

Doorlec Fire Release System

For fire rated rolling service doors connecting to existing dropout fusible link device
For GH and Belt Drive operators

DEV-RSSD-4000-INS

Devanco Rolling Steel Service Door 4000 20GA Insulated Galvanized Slats **Made to Order

Model 4000 Insulated roll up door is complete with a curtain hood guides counterbalance and option for operation such as chain hoist electric operator.
The insulation shall consist of closed cell urethane foam injected insulation a minimum of 1 inch thick providing a 7.2 R-value and sound barrier protection with an STC 25 rating.
Insulation is pressure foamed in place bonding both the front and back slats while filling all voids and creating a thermal break.
Pricing varies according to size and options selected.

HAE00073

Linear Main Cover for LDCO841/863B

Replacement Parts List

3007-1

Elton Telescopic Door Handle / Foot Plate Black

For door thickness: 1-3/8" - 2"
Black polyethlene
Cut-out size: 6-3/8" x 3-5/8"

CAPXLTK

LiftMaster Trim Kit and Back Kit

Trim ring and back box for CAPXL.
Conceal openings left from other systems in flush-mount Infinity L and Icon installations.
Dimensions: Outer Trim – 23.75” x 19.375”

TRACK-SET-2-134-7

2" Tracks Set 7'-0" Torsion 1-3/4" Door Clips for Wood Frame 15" Radius *** By quote only

BCSI-PM28

Pivin Drapeau Disconnect Coupler BCSI Gate Operator ** Price by Quote Only

CLUTCHPLATE004

Manaras Clutch Plate 5/8 Trolley

111-0061

RW Box Track #33 Black 10ft

Finish: Black enamel

21-35057

LiftMaster Transformer 460V 24VAC 40VA

575V PRIMARY 24V SECONDARY
Same as K21-35057

SHAFT105

Manaras Limit Shaft 5/8"-24 UNEF LG

1326-2-BLACK-PLEXI

Elton Commercial Window 2" thick 1326 Black Frame Sealed Plexi Glass

Screw together window kit
Frame size: 26-1/8" x 13-9/16" (Tip to Tip)
Cut-out size: 25-1/16" x 12-9/16"
Vision area: 23-7/16" x 10-13/16" Corner Cut 4" Radius
Different glass options and frame colours are available upon request

K79-13493B-600

LiftMaster Logic Board Replacement Kit FDO5011BUR UL325 with batteryback-up board

Replacement board for fire door model FDO5011BUR

426-0914

Richards-Wilcox Galvanized End Cap T175-24" RH

MC00001

Micanan Gear Reducer 45:1 (1/2 3/4 & 1HP)

For PRO-GH

SEA-23105515

SEA Wireless Intercom System 3G/4G Audio

Up to 100 Caller ID Access Number: Use your phone as entry credentia
Roll Over Call feature up to 4 Phone Numbers
Weatherproof and vandal proof stainless steel design
Simple Set Up by SMS Text Message or by APP - CellCom Prime Programmer
Ideal for Vehicular & Pedestrian Gates as well as Office entrances
Lighted keypad up to 250 Entry Codes: 200 Entry Codes 20 Time Restricted Codes 20 Temporary Codesl

.......more details

BEARING047

Manaras Flange Bearing 2-Bolt Black for 1' bore

2 set-screw holes 1/4-28 at 90 degrees. Set-Screws NOT included
Replaces BEARING012

K94-37694-3

LiftMaster Electric Motor SL585U 1.5 HP

Replacement motor for SL585151U

308301

Linear 2-Channel Multi-Code Key Ring Transmitter 300 MHz

Open/Close remote for 2 doors
Compatible with 300 MHz Multi-Code receivers and Model 109950 and 302850 receivers
Easy access to battery and coding switches - 10 dip switches
Power: 12-volt battery
Codes: 1024 codes for each channel (set by dip switches)
RF frequency: 300 MHz

.......more details

Programming instructions

MM00082

Micanan Solenoid Support Bracket (MSI0085)

FLO2R-SA

NICE 2-btn Keychain Remote 433.92 MHz

Rolling code No internal dip switches programming with the reciever
Battery included: 12V (GP23A)
Dimensions: 72 x 15 x 40 mm

77

Whiting Steel Outside Cam Lock Black Standard

K75-10214

LiftMaster Straight Door Arm Kit

For use with various LiftMaster® Commercial Door Operators.
Complete kit includes: straight arm emergency rope with handle and warning label
Also known as: 41K3681 7510214 453405 75-10214 305105003 1C3681 1C3428

CP-PW-NM-MCJH

Lynx Pocket Wheel for MCJH 6"x1" Bore Long Hub

K107A0031

LiftMaster Replacement Keys (2) for KPW5 KPW250

Replacement keys only

MX00218

Micanan Clutch Shaft Assembly for PRO-LH

41D8260

LiftMaster Cover 8355W

A one piece LiftMaster® "Silver" Replacement Cover.
For use with LiftMaster® 8355W Series AC Belt Drive WiFi® Garage Door Openers

LM56A

LiftMaster Magnetic Proximity Reed Switch

Normally Open magnetic sealed reed switch; proximity switch
Used for overhead door contacts.

Installation Manual

1371

Whiting Complete Bottom Bracket with Cover

050DCDDOWF

LiftMaster Receiver Logic Board WiFi Dock Door Jackshaft

050DCDDOWF is a Receiver Logic Board Replacement Kit.
Compatible with LiftMaster® Model DDO8900W DC Light-Duty Commercial Jackshaft Operators; featuring WiFi®

MQ00008

Micanan Set Screw 5/16"-18 x 5/16" Long

LJH-353-3/4

Doorlec 3/4HP 575V 3PH Jackshaft Operator

Technical information

SPRAY-429

Aluminum Touch Up Spray Paint Ice White / Blanc Glacier #429 *** To Extent of Inventory

140g

1224-2-BLACK

Elton Commercial Window for Flush Doors 2" thick 1224 Black Frame Sealed Glass

Screw together window kit
Thermal window
Frame size: 25-1/8" x 13-1/8"
Cut-out size: 24-1/16" x 12"
Vision area: 21-11/16" x 9-5/8"
Different glass options and frame colours are available upon request

.......more details

60-7531

Fasteners Wedge Anchor 3/4" x 5-1/2" 4/Bag

Secure anchoring into concrete brick or block
Ideal for mounting dock bumpers
4 per bag

SPR50B36X1

Sprocket 50B36 1" shaft 1/4" KW

36 tooth sprocket for #50 chain

BK000-B/BLACK

Residential Top Roller Bracket Adjustable 2-Bolt Black Powder Coated Sold per Piece

Sold per piece - not sold as a pair
Meant for 2" hardware
Individually wrapped

50442

Doorlec Mushroom Push-Button Red for 1-Door

Capable of opening one door
NEMA 4 Enclosure
non-lockable

MP00069

Micanan Jackshaft w/Aux Trolley Assembly Mod. 7ft High Door #41 Trolley Drive Chain

Provides an auxiliary trolley assembly where otherwise a jackshaft operator may be preferred
NOTE: Operator must be supplied with reverse limits
If purchasing for field install the limits on the operator would need to be reversed

CP-PU-DRV-58-8

Lynx Drive Pulley 5/8" x 8" 4L MR TC3 Open/Spoke Style for Trolley Ops

ST101-INT-WHITE

Lynx Intermediate Panel White 10x24

EP2982-NL

Exhaust Port 4" non latching short barrel *** To Extent of Inventory

4" inside diameter 1/4" sleeve
Includes fasteners & gaskets.
Polished aluminum finish.

Z9966

Deuer Cable Puller

Light duty wire and cable gripping tool
For wire 1/16" - 1/4" diameter
Recommened for residential use only
1300 lbs. capacity

CGH751L5-RH

LiftMaster Gearhead w/ Brake & Carwash Mod. 3/4HP 115/230V 1P L5 - Right Hand

Gearhead style commercial door operators employ lubricated gears for heavy industrial high cycle applications.
GH-style operators include a floor level chain hoist to ease manual operation in an emergency or power outage.
Hoist wheel is easily moved to Right or Left hand side of unit eliminating the need to order right or left hand mounting.
MyQ Technology enables you to securely monitor and control your facility operator with your smartphone tablet or computer. Internet Gateway 828LM required.
Security +2.0 radio receiver safeguards your facility - with every click a new code is sent to the commercial door operator so the door opens only for you.
Timer-To-Close: Conveniently and confidently closes the commercial door automatically after a predetermined amount of time has elapsed for added security and peace of mind.

.......more details

SHAFT036

Manaras Limit Shaft 5/8"-18x12

27020

Doorlec Electric Motor TEFC 1/3 HP 115/230V DC301

MB-03104

Micanan Electric Motor Only 1 HP 230/460V 3PH C-Flange TEFC 56C

For models GT GH GHC GSD

MDT-2A

Linear 3-Channel Visor Transmitter MegaCode 318 MHz

Compatible with all Linear access receivers and controllers
Superior transmission range
Factory programmed MegaCode format supports over 1000000 codes
Unique ”Extra” top button
High visibility operate LED
Visor clip included

.......more details

Programming instructions

K20-3200C-5

LiftMaster Electric Motor 2 HP 575V 3PH CF

Also known as: 20-3200C-5 K20-3200C5 K20-3200C-5-H27

K001D7121-1

LiftMaster Main Board EL1SS

Replacement board only

PRO-X_MOD-3HP

Micanan Explosion-Proof Modification N-7/N-9 for 3HP

Modification includes an explosion-proof motor explosion proof fittings operator mounted explosion-proof electrical control enclosure and n explosion-proof three button station.

.225-134-L-C

Cut-to-Length Torsion Spring .225 x 1-3/4" Left Hand Wound Coated ** Price by Quote Only

Priced per inch - cones sold seperately
For factory installed cones use part no. C-134-INSTALLED

PRO-HBH-7543U-L

Micanan 3/4HP 460V 3P Heavy-Duty Jackshaft N1 Eyes Monitored ECB Left Hand

3/4 HP460V 3PH Industrial Continuous Duty Jackshaft Operator Ideal for Sectional Doors Rolling Steel
Monitored logic board with integral 372Mhz radio receiver that can hold up to 20 transmitters (MK-00647/ MK-00653/ MK-00659) or 200 of the 1 channel hand held transmitters (MK-00660).
N-1 Through-beam (MK-00649) photocells included. Other options available.
3-btn O/S/C (02-103) wall control station included
Adjustable Friction Clutch 5L320 drive belt
#50 Roller chain 18 tooth door sprocket included

.......more details

LA412DCS

LiftMaster Secondary 12VDC Solar Actuator Arm for Dual Swing Gate Applications

Installation manual Manuel d'installation

PRO-H-5021-U-RH

Micanan 1/2HP 230V 1P Hoist Operator N1 Eyes Monitored ECB Right Hand

Continuous duty belt drive jackshaft operator with emergency chain hoist
Full function Smart 10.0 Logic control board featuring on-board receiver with antenna
Nema 1 photoeyes included
Solenoid brake OPTIONAL
On-Board receiver holds up to 20 transmitters

MM-00319

Micanan PRO-GJ L-Bracket Right Angle Front of Coil For Rolling Steel Doors

MK-00477

Micanan Timer Plug-In Type 0-10min 120V

MV-00007

Micanan Single Button Nema-4 Pushbutton Control Station

Surface mount
Non-Metallic Enclosure
Double Pole Contacts
Dimensions: H=3-1/4"" W=2-3/4"" D=2-1/2""

MK-00428

Micanan Reversing Relay 24VAC Coil 3-Pole TPDT 11-Pin Flange Mount

For PRO-LTB LJ LH LHAB

12119

Doorlec Commercial Aluminum Sliding Carriage with Teflon Insert

Works on all Doorlec trolley operators

PRO-J-10011-U-LH

Micanan 1HP 115V 1P Jackshaft Monitored ECB N1 Eyes Left Hand

On board receiver with antenna
Continuous duty industrial motor with overload protection
Heavy duty 5L V-belt
Adjustable friction clutch
Solenoid brake (optional PRO-JB) recommended for large doors
3/4" permanently lubricated & sealed precision ball bearings on pulley shaft

.......more details

Installation Manual (EN) Specification Sheet

ME117-C7

Miller Edge PVC Mounting Channel Sold by the Foot

PRO-GT-5083-U

Micanan 1/2HP 208V 3P Worm Gear Trolley Operator N1 Eyes Monitored ECB

On-Board receiver holds up to 20 transmitters

PRO-APTB-5011-U

Micanan 1/2HP 115V 1P Apartment Trolley Operator With Brake N1 Eyes Monitored ECB

Low clearance design for APT applications (9.5")
Door speed: 12" per second
Monitored board
On-Board receiver holds up to 20 transmitters

PRO-APT-7543-U

Micanan 3/4HP 460V 3P Apartment Trolley Operator N1 Eyes Monitored ECB (PRO APTE)

Low clearance design for APT applications (9.5")
Door speed: 12" per second
Monitored board

PRO-TB-10021-U

Micanan 1 HP 230V 1P Trolley Operator with Brake N1 Eyes Monitored ECB

Designed for use on commercial / industrial sectional overhead doors with standard lift tracks.
#41 roller chain on 3/4 & 1 HP models
Monitored board
On-Board receiver holds up to 20 transmitters

PRO-T-5011-E

Micanan 1/2HP 115V 1P Trolley Operator NM ECB No Eyes

Designed for use on commercial / industrial sectional overhead doors with standard lift tracks.
#410 roller chain on 1/2 HP models
Non-Monitored board NO photocells
On-Board receiver holds up to 20 transmitters