Devanco Canada

 
User Name:
Password:
Remember Me:
Forgot your password
Request a Login
Home
WHITING-ST

Whiting Strap Mounted Inside Door Option

  • This is an add-on option when ordering a Whiting door
OPH-6532-M-N1-LH

Manaras Opera-H 1/2HP 600V 3Ph Monitored ECB and N1 Photoeyes Left Hand

  • A heavy-duty industrial jackshaft operator.
  • For use on Standard High and Vertical Lift sectional doors.
  • Can also be used on Rolling doors or Grilles.
  • Comes with a self-engaging chain hoist for manual operation.
  • Clearence: side room required 15"
RSH-6814-MON-RH

Manaras Rapido Jackshaft Operator 1 HP 208V 1PH W/ Elect. Board N4X Thru Beam Eyes RH

  • High speed heavy-duty v-belt drive industrial operator.
  • Designed for use on properly counter-balanced standard high and vertical lift sectional doors weighing a maximum of 750 lbs.
  • Two times the speed of the standard jackshaft operator
  • Manages soft-starts and soft-stops
  • Can be wall or shelf mounted on either side of the door
  • Cast iron pillow block bearings
    • .......more details
19-50HL-SS

Half (Offset) Link #50 Stainless Steel

  • For #50 chain
OPH-6214-M-N1-RH

Manaras Opera-H 1 HP 240V 1Ph with Monitored Board and N1 Photoeyes

  • A heavy-duty industrial jackshaft operator
  • For use on Standard High and Vertical Lift sectional doors
  • Can also be used on Rolling doors and Grilles
  • Comes with a self-engaging chain hoist for manual operation
  • Clearence: side room required 15"
2376.156.19.780

Whiting Torsion assembly .156 wire size 19" spring length 78" shaft

2704.177_13.5

Whiting Roadside Torsion Spring 2-3/16" ID 13-1/2" Long

  • Torsion spring wire only
  • .177 wire size
GALV-295-258-L

Cut-to-Length Torsion Spring .295 x 2-5/8" Left Hand Wound Galvanized Blue Price per Inch

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-258-INSTALLED
178B45

LiftMaster Curved Door Arm (K10-10203)

  • Also known as: 1010203 105004 10-10203 K10-10203
  • For use with various LiftMaster® Medium Duty Commercial Door Operators
TDC7-12

Liftmaster Comm. 12FT Trolley Angle set (10-5812-P x 2) and #48 chain pack (TDC48-12) ***Actual length 179"***

  • Double Angle Rails for doors up to 12'6" high
  • Includes #48 chain pack
400-CBAC-STD-115V

FAAC Standard Gate Arm w/Positive Stops 40-1/2" L *** Price by Quote Only

  • 400 CBAC Standard (Short) Arm with positive stops 40-1/2" tip-to-tip
  • Replacement arm for hydraulic Swing Gate Operator 10420112.5
  • This arm is meant to be used to transform a kit into a master/slave or bi-parting system or as a replacement operator for an existing FAAC system
  • Dimensions: 40.5 x 3.35 x 3.35
041-0035

LiftMaster Chain Spreader and Sprocket

  • For use with various LiftMaster® and Chamberlain® DC Chain Drive Garage Door Openers.
  • Complete kit includes: Chain Spreader Sprocket and C-Clip
  • This replacement part is compatible with the following models: 8580WLB
OGH-6534-M-N1-LH

Manaras 1 HP 600V 3Ph Gear Head Operator Monitored ECB w/N1 Eyes Left Hand

  • A heavy-duty worm gear industrial operator designed for use on industrial standard high and vertical lift sectional doors or rolling doors and grills.
  • Includes a self-engaging chain hoist for manual operation
  • 25 cycles per hour 80 cycles a day
  • Hoist on right side standard can easily be moved to the left in field
  • Full overload protection
  • BRACKET112 must be used for wall mounting
    • .......more details
41B5348-2

LiftMaster Socket and Hub Kit 8360/8360W

  • Compatible with LiftMaster® Models 8360/8360W Chain Drive Garage Door Openers
GALV-306-258-144-L

Torsion Spring .306 x 2-5/8" x 12ft LH Galvanized Red

  • Wire size: .306
  • Inside diameter: 2-5/8"
  • Length: 12 ft
  • Galvanized Stenciled
GALV-306-334-144-L

Torsion Spring .306 x 3-3/4" x 12ft LH Galvanized Red

  • Wire size: .306
  • Inside diameter: 3-3/4"
  • Length: 12 ft
  • Galvanized Stenciled
OMJ-6112-M-N1-LH

Manaras Medium-Duty Jackshaft Operator 1/2 HP 120V with Monitored Circuit Board N1 Eyes Left Hand

  • Designed for use on standard high and vertical lift sectional doors
  • Can also be used on small rolling doors and grills
  • Single phase intermittent-duty motor has instant reverse and internal automatic reset thermal overload protection
  • Mechanical brake
  • Floor level disconnect mechanism which must be engaged for manual push-up operation
  • 14 cycles per hour 50 cycles per day
    • .......more details
11.7135

Whiting Horizontal Track 2" x 135" L 6" Radius Roadside 1 Piece

  • 1 roadside horizontal track
MOTOR069

Manaras Electric Motor 1HP 575V 3PH 60hz TEFCXP 56C CFACE Only No Base

BEA-10EABA

BEA Bracket Accessory for Eagle Artek

BEA-10PS12-24

BEA Power Supply UL/ULC Listed

BEA-10LIGHT-TBASE

BEA Modular LED Signal Base

  • To be used with the BEA-10LIGHT modules.
User GuideDatasheet
K77-50336

LiftMaster Washer and Nut Only for Traveler Carriage Q232

  • Compatible with various LiftMaster® Swing Gate Operators
2400-407

Linear Ste Screw Brass Tip 5/16-18x5/16

2400-416

Linear Dowel Pin .3752 dia x 2" Long

2100-1650

Linear Plate with Solid Pin V Groove

2100-1738

Linear Drive Shaft 1" Slide Gate HSLG

GH4416-50

Green Hinge 5-Panel Commercial System Set

  • The Green Hinge System provides a close tight seal of your door to your building eliminating gaps and saving energy and money!
  • Patented spring-loaded garage door hinge system that allows automatic adjustment of the overhead garage door closing up to 1/4in side gap
  • Reduces dirt dust bugs rain & moisture
  • Quick and Simple installation
  • Fits Residential & Commercial Doors
  • 100% Made & Assembled in the USA
    • .......more details
EHJX-353-1

Doorlec Industrial Jackshaft Op. Explosion Proof 1 HP 575V-3Ph ** Price on Request

  • Explosion proof NEMA 7/9 Heavy-Duty Industrial Operator
  • DC-2000 logic with adjustable Timer To Close Delay On Reverse.
  • Solenoid Brake prevents coasting and secures the door when closed
  • Explosion-proof (sealed) continuous-duty electric motor with overload protection
  • Automatic Friction Clutch protects the door and operator
  • Self-aligning Heavy Duty sealed Pillow Block bearings on all shafts for high cycle applications
    • .......more details
ME120-Y-4E-P/FT

Miller Edge Sensing Edge Yellow 4-Wire Monitored End Outlet Sold per Foot

  • Electromechanical slide in edge with a small profile for motorized gates and doors rolling shutters and pinch point protection applications.
  • Touch sensitive signaling
  • Temperature range: -30F to 155F
  • Lead wire: 18 gauge 2ft length
  • Sensitivity: nominal 4 PSI
  • 2 wire NO configuration
    • .......more details
PROBE-200

EMX CARSENSE-101 Direct Burial Probe with 200' Lead Wire

  • Wand only
  • Requires CS101 (Carsense-101)
PRX-320

EMX Keypad/Card Reader Waterproof 5402-1

  • Up to 2000 users by card
  • Up to eight user pass codes by keypad
  • Low energy consumption ideal for solar applications
  • Built-in contact for doorbell annunciator
  • CE certified and is also ROHS compliant
  • Key Confirmation: Green LED On while key is depressed
    • .......more details
9003-200-11-BLACK

Commercial Side & Top PVC Weather-Strip Reverse Angle 2" Track Bolt On 11' Long - Black

  • Black rigid vinyl retainer with black flexible vinyl insert.
  • Reverse angle bolt-on vinyl retainer.
  • Bolts onto reverse angle steel jamb.
Drawing
2200-983

Linear Brake and Puck HSLG ***NLA Replaced by 2200-983-UPS

2100-669-UPS

Linear Hub Clutch Cast Ir Pinned UPS HSLG

OPH-6533-M-N1-RH

Manaras Opera-H 3/4HP 600V 3Ph with Monitored ECB and N1 Photoeyes RH

  • A heavy-duty industrial jackshaft operator
  • For use on Standard High and Vertical Lift sectional doors
  • Can also be used on Rolling doors and Grilles
  • Comes with a self-engaging chain hoist for manual operation
  • Clearence: side room required 15"
SPR50B42X1

Sprocket 50B42 1" shaft 1/4" KW

  • 42 tooth sprocket for #50 chain
2806.156.170

Whiting .156 x 2-3/16 x 17" Roadside with Cones

K20-3100M-5-H25

LiftMaster Electric Motor 1 HP 575V 3P L5

  • For use with various LiftMaster® Logic 5.0 Commercial Door Operators and Slide Gate Operators.
  • Also known as: 20-3100M-5 K20-3100M-5
GHX-6114-M-RH

Manaras Explosion Proof Gear Head 1 HP 120V Monitored Right Hand

  • Nema 7/9 control box
  • Electrical connections from motor to control box consists of hazardous location certified fittings and NEMA 7/9 O/C/S push-button station
MD-00025

Sprocket 410B23 x 1" 1/4" KW 2 SS

65-5501-12

LiftMaster Bi-Parting Mod Kit 12ft (Includes 19-5118 Chain #41 for 18ft Door and 10-5816-P Track for 16ft Door

  • Includes: 65-5501 Bi-Parting 19-5118 Chain #41 for 18ft Door 10-5816-P Track for 16ft Door
SPR410B12X1

Sprocket 410B12 x K1/4 2S 5/16-18 PH1/4

CAPXSHOOD

LiftMaster Sun Hood for CAPXS Black

  • Sun Hood exclusively for installing with Model CAPXS – Smart Video Intercom S.
  • Provides simple protection for the CAPXS touchscreen for better visibility when mounted in locations with direct sunlight.
  • Fully compatible with the CAPXSTK Trim Kit accessory and CAPXSTK Trim Kit with Postal Lock for a clean aesthetic installation.
  • Dimensions: 6.15” x 4.13” x 4.74”
2376.187*29.900

Whiting Torsion assembly .187 wire size 29" spring length 90" shaft

  • This is a full balancer assembly
  • Twin springs one road one curb with a shaft through it
LB710-14

Laminated Bumper Standard Black 10" x 14" 7" Projection Horizontal Installation ** Special Order

  • For use in low to medium traffic loading docks in factories and warehouses.
  • Can be used as rub rails at the sides of truck wells
  • Fabric reinforced rubber pads cut from recycled truck tires.
  • Rubber pads laminated between steel angles and secured with 3/4” rods
  • Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
  • Wall mounting hole size is 7/8” diameter.
    • .......more details
2100-765

Linear Shaft Pulley HSLG

1104-18FT-CHI-CRM

Residential Side & Top PVC Weather-Strip with cap 18' Long - CHI Cream (C-C)

  • Cream rigid vinyl retainer with cream flexible vinyl seal.
  • Dual fin vinyl.
  • Comes with cap to hide screws.
  • CHI compaible colour
  • Full case quantity only (12).
GALV-312-334-144-R

Torsion Spring .312 x 3-3/4" x 12ft RH Galvanized Yellow

  • Wire size: .312
  • Inside diameter: 3-3/4"
  • Length: 12 ft
  • Galvanized
GALV-375-6-144-LH

Torsion Spring .375 x 6" x 12ft LH Galvanized Yellow/Green

  • Wire size: .375
  • Inside diameter: 6"
  • Length: 12 ft
  • Galvanized
MGH-6234-M-N1-RH

Manaras 1 HP 208V 3P Jackshaft Monitored w/N1 Eyes Right Hand

  • A very heavy-duty worm gear industrial operator designed for use on Industrial standard high and vertical lift sectional or rolling doors and grilles.
  • It incorporates a chain hoist for manual operation with a floor level engaging device with electrical cut-out
  • Electrically activated drum-band type solenoid brake
  • Full overload protection
K19-40720D-NP

LiftMaster Chain #40 Nickel Plated 30ft

  • Includes (3) Master Links.
GALV-273-258-144-R

Torsion Spring .273 x 2-5/8" x 12ft RH Galvanized Orange/Red

  • Wire size: .273
  • Inside diameter: 2-5/8"
  • Length: 12 ft
  • Galvanized Stenciled
GALV-363-334-144-L

Torsion Spring .363 x 3-3/4" x 12ft LH Galvanized Green/White

  • Wire size: .363
  • Inside diameter: 3-3/4"
  • Length: 12 ft
  • Galvanized Stenciled
GALV-295-334-144-R

Torsion Spring .295 x 3-3/4" x 12ft RH Galvanized Blue

  • Wire size: .295
  • Inside diameter: 3-3/4"
  • Length: 12 ft
  • Galvanized Stenciled
GALV-262-258-144-R

Torsion Spring .262 x 2-5/8" x 12ft RH Galvanized Red/Yellow

  • Wire size: .262
  • Inside diameter: 2-5/8"
  • Length: 12 ft
  • Galvanized Stenciled
GALV-218-2-144-R

Torsion Spring .218 x 2" x 12ft RH Galvanized Yellow/Orange

  • Wire size: .218
  • Inside diameter: 2"
  • Length: 12 ft
  • Galvanized Stenciled
GALV-273-258-R

Cut-to-Length Torsion Spring .273 x 2-5/8" Right Hand Wound Galvanized Orange/Red Price per Inch

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-258-INSTALLED
GALV-295-334-R

Cut-to-Length Torsion Spring .295 x 3-3/4" Right Hand Wound Galvanized Blue Price per Inch

  • Priced per inch
  • For factory installed cones priced seperately - use part no. C-375-INSTALLED
GALV-218-2-L

Cut-to-Length Torsion Spring .218 x 2" Left Hand Wound Galvanized Yellow/Orange Price per Inch

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-200-INSTALLED
GALV-207-2-L

Cut-to-Length Torsion Spring .207 x 2" Left Hand Wound Galvanized Brown Price per Inch

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-200-INSTALLED
GALV-234-2-LH

Cut-to-Length Torsion Spring .234 x 2" Left Hand Wound Galvanized Price per Inch

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-200-INSTALLED
OHJ-6113-M-N1-RH

Manaras Heavy-Duty Jackshaft Operator 3/4 HP 120V 1 Ph Monitored ECB w/N1 Photoeyes RH

  • 25 cycles per hour 100 cycles per day
  • An Industrial duty operator featuring both the patented Hoist-a-Matic a self-engaging chain hoist for manual operation as well as a floor level disconnect
  • Specifically designed to motorize grills when a manual egress is required
  • Mechanical brake
  • Hoist on right standard
  • Full overload protection
    • .......more details
OPJ-6114-M-N1

Manaras Heavy-Duty Jackshaft Op 1 HP 120V 1PH Monitored ECB w/N1 Photoeyes

  • An industrial operator designed for use on standard high and vertical lift sectional doors
  • Can also be used on rolling doors and grills
  • It incorporates a floor level disconnect mechanism for manual operation
  • 25 cycles per hour 100 cycles per day
  • Continuous-duty single phase capacitor start or 3 phase motor open drip proof
  • Mechanical brake
    • .......more details
OSH-6212-M-N1-LH

Manaras Opera-SH 1/2 HP 240V 1Ph Monitored w/N1 Eyes Left Hand

  • An ultra high-end heavy-duty V-belt drive industrial jackshaft operator
  • For use on Standard High and Vertical Lift sectional doors
  • Can also be used on Rolling doors and Grilles
  • Comes with a chain hoist for manual operation and a floor level engaging device
  • Clearence: side room required 16"
Installation Manual
GAREX-PAINT-R12-WHTE

Garex Touch-Up Paint White for R12

BCSI-HV-CONT-BLOC

Pivin Drapeau Contactor Block BCSI ** Price by Quote Only

E/1929/069

Automatic Systems Round Arm Ass'y 13' (BL229)

  • Used on the BL229 gate op.
CRBH753L5-LH

LiftMaster Hoist Op. with Carwash Mod. 3/4 HP 208/230/460 VAC 3 Ph L5 Left Hand

  • H-style operators include a floor level chain hoist to ease manual operation in an emergency or power outage.
  • The operators are typically mounted to the wall when used with larger sectional overhead doors with vertical or high lift and mounted to the wall or the front of the hood when used with rolling doors and grilles.
  • H operators are attached to the door jackshaft to indirectly drive the door.
  • With the addition of the 828LM MyQ technology enables the user to monitor and control their operator and light with their smartphone tablet or computer.
  • Alerts can be received as email or pop-up (push) notifications on a mobile device ensuring the status of your commercial door.
  • Security+ 2.0™ safeguards your facility – with every click a new code is sent to the commercial door operator so the door opens only for you.
    • .......more details
DHJ751L5-RH

LiftMaster Ind. Duty Hoist/Jackshaft Op. 3/4 HP 115/230 VAC Logic 5 Right Hand***Discontinued

  • Industrial-Duty Hoist/Jackshaft Operator with Internal Door Lock Sensor
  • Optimal for shopping mall applications with heavier rolling doors and grilles.
  • Provides a floor level chain hoist to ease manual operation in an emergency or power outage.
  • Includes a door lock sensor to prevent damage to the door and operator caused by attempts to automatically open a locked door.
  • Industrial Ball Bearings on 1" Output Shaft
  • Second Floor-Level Disconnect for Manual Lifting in an Emergency
    • .......more details
2022691

FAAC Control Board for Model 741

CGH753L5-RH

LiftMaster Gearhead w/ Brake & Carwash Mod 3/4 HP 208/230/460V 3P L5 - Right Hand

  • Gearhead style commercial door operators employ lubricated gears for heavy industrial high cycle applications.
  • GH-style operators include a floor level chain hoist to ease manual operation in an emergency or power outage.
  • Hoist wheel is easily moved to Right or Left hand side of unit eliminating the need to order right or left hand mounting.
  • MyQ Technology enables you to securely monitor and control your facility operator with your smartphone tablet or computer. Internet Gateway 828LM required.
  • Security +2.0 radio receiver safeguards your facility - with every click a new code is sent to the commercial door operator so the door opens only for you.
  • Timer-To-Close: Conveniently and confidently closes the commercial door automatically after a predetermined amount of time has elapsed for added security and peace of mind.
    • .......more details
185002

Marantec Maveo Bluefi Stick

  • The maveo bluefi stick brings Wi-Fi connectivity to your residential garage door openers via phone app or the Internet
  • Compatible only with: Synergy 200 and 300 series IP20 Bluetooth 4.2 also known as 187141 with manufacture date after March 2022.
  • NOTE: Operators manufactured before March 1 2022 require a control board upgrade in order to be compatible with Maveo products and UL 325 unattended operation. (available soon)
LVB420-11/P1

Laminated Bumper Black 4" Projection Vertical Installation 20" x 11" Sold Individually Style P1

  • For use in low to medium traffic loading docks in factories and warehouses.
  • Can be used as rub rails at the sides of truck wells
  • Fabric reinforced rubber pads cut from recycled truck tires.
  • Rubber pads laminated between steel angles and secured with 3/4” rods
  • Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
  • Wall mounting hole size is 1” diameter.
    • .......more details
Specification Sheet
BEARING033

Manaras 605 Ball Bearing 5/8"

MODKIT168A

Manaras Auxiliary Output Module

  • For connection of 24VDC LED light strips
10-8055

LiftMaster Counterweight Clamp for BG790

  • Also known as: G108055
K80-38735

LiftMaster Vent Plug Kit HCTDCU

MQ00011

Micanan 3/32" Aluminum Oval Sleeve Sold per Unit

DS100-SHEET-DOOR

Wayne Dalton Roll-Up Sheet Door Light Commercial ** Price by Quote Only

  • Sheet Door Made to Order
  • Round panel profile continuous curtains constructed of 26-gauge hot-dipped galvanized steel with a silicone polyester paint finish
  • Automatic door stop prevents the curtain from rolling up past the header
  • Heavy-duty steel axle supports door curtain and counterbalance system
  • Oil-tempered steel springs are engineered to counterbalance the doors providing for smooth easy operation and cycle performance
C12/5-BLADE

Felco Replacement Blade FC12/5 Single Blade

  • Single balde only for FC12 cutter
2807.177*270

Whiting Spring Assby .177 x 2-3/16 x 27" Curbside

  • Replacement torsion spring with cones
  • Specs: .177 x 2-3/16" x 27" Long
  • For Roadside order part # 2806.177.270
GDI-HB340

GDI Direct Drive & Jackshaft HAML-RBH-A830 Nema 4 To Accept 1" Shaft Non Monitored

  • Compact & Light Weight - Fast Installation
  • Applications Include Car Wash Cold Storage Pharmaceutical Agricultural Food Facility Sectional Grilles and Rolling Steel Doors
  • Brushless DC High Reliability Hi Efficiency & Low Maintenance Motor
  • No maintenance GearMotor sealed stainless steel bearings no limit switches no belts or hydraulic cylinders to maintain
  • One Operator Handles all AC Voltage Applications (115/208/230/460 & 575V)
  • Soft start soft stop
    • .......more details
GDI-HB330

GDI Direct Drive & Jackshaft HAML-RBH-2030 Nema 1 To Accept 1" Shaft Non Monitored

  • Compact & Light Weight - Fast Installation
  • Applications Include Car Wash Cold Storage Pharmaceutical Agricultural Food Facility Sectional Grilles and Rolling Steel Doors
  • Brushless DC High Reliability Hi Efficiency & Low Maintenance Motor
  • No maintenance GearMotor sealed stainless steel bearings no limit switches no belts or hydraulic cylinders to maintain
  • One Operator Handles all AC Voltage Applications (115/208/230/460 & 575V)
  • Soft start soft stop
    • .......more details
GDI-HB310

GDI Direct Drive & Jackshaft HAML-RBH-2030 Nema 1 To Accept 1" Shaft UL-325 Photo Eyes Extra

  • Compact & Light Weight - Fast Installation
  • Applications Include Car Wash Cold Storage Pharmaceutical Agricultural Food Facility Sectional Grilles and Rolling Steel Doors
  • Brushless DC High Reliability Hi Efficiency & Low Maintenance Motor
  • No maintenance GearMotor sealed stainless steel bearings no limit switches no belts or hydraulic cylinders to maintain
  • One Operator Handles all AC Voltage Applications (115/208/230/460 & 575V)
  • Soft start soft stop
    • .......more details
GDI-LG930

GDI Jackshaft & Trolley JDMG-LG-2030 Nema 1 Non Monitored

  • Low Headroom at 4-3/4" (Trolley)
  • Dimensions: 11.35" x 4.3" x 4.3"
  • Motor type: Brushless DC
  • Max cyles: Open/Cose per day = 3200
  • One operator can handle all AC voltages - Single phase and three phase
  • No maintenance GearMotor sealed stainless steel bearings no limit switches no belts or hydraulic cylinders to maintain
    • .......more details
GDI-LG920

GDI Jackshaft & Trolley JDMG-LG-A830 Nema 4 UL325 Photo Eyes Extra

  • Low Headroom at 4-3/4" (Trolley)
  • Dimensions: 11.35" x 4.3" x 4.3"
  • Motor type: Brushless DC
  • Max cyles: Open/Cose per day = 3200
  • One operator can handle all AC voltages - Single phase and three phase
  • No maintenance GearMotor sealed stainless steel bearings no limit switches no belts or hydraulic cylinders to maintain
    • .......more details
PRO-JB-7553-U

Micanan 3/4HP 575V 3P Jackshaft with Brake Mon ECB N1 Eyes Universal Mount

  • On board receiver with antenna
  • Continuous duty industrial motor with overload protection
  • Heavy duty 5L V-belt
  • Adjustable friction clutch
  • Solenoid brake included recommended for large doors
  • 3/4" permanently lubricated & sealed precision ball bearings on pulley shaft
    • .......more details
OTBH-6113-1-M-N1

Manaras Trolley Operator 3/4HP 120V 1Ph Monitored w/N1 Eyes

  • Heavy-duty low headroom trolley operator designed for use on industrial standard lift sectional door
  • 25 cycles per hour 80 cycles per day
  • It incorporates a drum-band type solenoid brake.
  • Tracks are an extra 36 lbs per track
  • 3/4 HP & 1 HP operators come with #41 full roller chain
  • Includes PHOTO-070
    • .......more details
GH303L5-RH

LiftMaster Gearhead with Brake 3 HP 208/230/460V 3-Phase Logic 5

  • Includes CPS-U photoeyes
FAAC-844-115V

FAAC 844 Slide Gate Operator 115V

  • The FAAC Model 844 automated system for sliding gates is an electro-mechanical operator transmitting motion to the sliding leaf via a rack or chain pinion appropriately coupled to the gate
  • The non-reversing system ensures the gate is mechanically locked when the motor is not operating and therefore no lock needs to be installed
  • Control Board: model 780D
DISCONNECT008

Manaras HDW Brake Release MTBH

OSH-6112-M-N1-LH

Manaras Opera-SH 1/2HP 120V 1Ph Monitored ECB w/N1 Photoeyes Left Hand

  • An ultra high-end heavy-duty V-belt drive industrial jackshaft operator
  • For use on Standard High and Vertical Lift sectional doors
  • Can also be used on Rolling doors and Grilles
  • Comes with a chain hoist for manual operation and a floor level engaging device
  • Clearence: side room required 16"
  • Solenoid activated Brake
    • .......more details
Installation Manual Sell Sheet
MILLER-LEAD-WIRE

Miller Edge Up-Charge for Custom Length Lead Wire Sold by the Foot

  • Up charge for extra lead wire
041-0203-000

LiftMaster Light Pod Kit Single Lens No Camera Model

  • Light Pod Replacement Kit. For use with various Chamberlain® Single Lens Belt Drive and Chain Drive Garage Door Openers featuring myQ® technology and no video camera; manufactured after 2021 only.
K11-8061

LiftMaster Main Shaft (1)

  • Also known as: 11-8061 118061 G118061
  • For use with various LiftMaster® Commercial Gate and Barrier Gate Operators
K41-0246-000

LiftMaster Limit System Encoder IHSL24UL/INSL24UL

  • Compatible with the following models: IHSL24UL INSL24UL
SMF5005K

Serco Holdown with Rack Bar ** Price by Quote Only

  • A brake band hold-down for a mechanical dock leveler includes a frictional brake that grabs the hold-down when the ramp is at the proper elevation.
  • If additional upward force (this can happen when trailers move up and down when trucks are loaded or unloaded) is applied to the ramp the frictional brake will give way just enough to accommodate the change.
  • This prevents the dock leveler ramp from being damaged.
  • For Serco mechanical dock levelers
P-733T

Pulsar 3-btn 3-Door O/C/S Transmitter 318 MHz

  • Allstar compatible
  • Wall mount
  • OPEN-CLOSE-STOP 3 doors
  • 8 dipswitches 318 MHz
Programming instructions
41D0598-1

LiftMaster U Bracket Adaptor

  • Also known as: 062314 12D598-1 12D598 41D598-1
  • For use with various Chamberlain® Belt Drive and Chain Drive Garage Door Openers and square rail assemblies