The beam of the Nice F210 photocells has a horizontal scope of 210° thereby increasing the safety level of the system and simplifying installation: the gate or garage door to be automated quite often slide flush with the wall making it very difficult to position the photocell.
The F210 photocells are available with relay output
Type: control programming and diagnostics unit for devices equipped with
BusT4 connector
Technology adopted: half duplex 19200 Bps serial connection on differential bus for delivery of commands modification or parameters and monitoring of diagnostic data
Maximum number of hourly commands: 64
Event log: storage capacity of 400 events
Operating temperature: from –20°C to +55°C
• Dimensions (mm): 107 x 61 x h 20 (with wall-mounting support: 125 x 70 x h 32)
Light curtain made up of a series of thru-beam photo eyes designed to provide a dense barrier of protection for motorized or high speed doors.
Ideal for environments that require expanded protection for protruding parts that may not be detected by standard single-beam photo eyes mounted 6" above the floor.
Answer the gate intercom and open the gate from anywhere in the world
● 1-way video 2-ways audio communication with visitor
● Simultaneously calls up to 4 devices
● Use your smartphone phone as virtual key
● Connect to the intercom directly through your phone’s Wi-Fi enter the passcode for home hub Wi-Fi and the device is connected
● View the gate/door and open any time with monitoring
mode
● Latching outputs for hold open
● Upgraded camera with IR cut filter for better color by day and IR night vision by night
● Store images of the last 32 missed callers on your phone
● Connects to your local internet router via WiFi or Ethernet
● Compatible with most wireless range extenders and wireless bridges for long distance applications
● No monthly fees
Entry codes: 1200
Ethernet Range: 328 ft
Wifi Range: 197 ft (subject to Wifi router range and environmental conditions)
The direct drive operator consists of a DC electric motor directly coupled to a hollow shaft (30:1 reduction) worm gear reducer designed to install over keyed door shaft.
Continuous duty 1 HP 90 V DC 1750 rpm motor suitable for
110 to 240 V 1 PH and 60 Hz power supply.
Comes with integral absolute encoder to control the door travel
24 V 5 amps back-up battery pack and 3/8” ratchet socket to
accept and crank for manually operating the door in case of power failure
Programmable wall mountable UL325 compliant NEMA 4X control panel with LCD display and OPEN-CLOSE-STOP buttons on cover
Light curtain made up of a series of thru-beam photo eyes designed to provide a dense barrier of protection for motorized or high speed doors.
Ideal for environments that require expanded protection for protruding parts that may not be detected by standard single-beam photo eyes mounted 6" above the floor.
Ideal for pre-2010 installations not requiring a monitored solution.
The 26 gauge corrugated door curtain is manufactured from full hard galvanized grade 80 steel and coated with Super Durable polyester paint
Available in sizes up to 10’0” x 10’0” and in over 20 different colors
During production each spring is coated with a generous amount of grease that penetrates the innermost pores of the spring with additives displacing moisture and preventing the formation of rust and corrosion
A 433.92 MHz rolling code transmitter with management of identity codes and certificates it is self-learning with a built-in proximity receiver.
With 72 bit O-Code encoding it is also compatible with Nice Flor encoding receivers.
If you've ever been frustrated programming remote controls have no fear! By using a transmitter already programmed to the receiver it memorizes the data via an enabling code between the two making programming a simple process
The Era One uses data processing and recognition systems that increase its degree of security delivering a threefold reduction in automation response time. Attach the Era One transmitter to your keys or fix it to your car visor with the included visor clip.
Estimated Range: Outdoors: 656 ft Inside Building: 115 ft
Doors used with this operator should be balanced with the ability to be manually lifted by hand in an emergency or power outage.
The operators are typically mounted to the wall when used with smaller sectional overhead doors with a vertical or high lift and mounted to the wall or the front of the hood when used with rolling doors and grilles.
J operators are attached to the door jackshaft to indirectly drive the door
MyQ® Technology enables you to securely monitor and control your facility operator and lights with your smartphone tablet or computer for greater peace of mind.
Security+ 2.0® safeguards your facility – with every click a new code is sent to the commercial door operator so the door opens only for you