Devanco Canada

 
User Name:
Password:
Remember Me:
Forgot your password
Request a Login
Home
7001-12-W/B

Commercial Side & Top Weather-Strip 12' Long - White and Black (WB)

  • White galvanized steel with black dual fin vinyl.
  • Commercial and Residential use.
  • Steel is notched on both ends for easier installation.
  • Full case quantity only (10)
535LMC*

LiftMaster Universal Radio Control Receiver 390 MHz **Replaced by 412HMC

  • Over 100 billion possible codes makes it impossible to duplicate the frequency
  • Jumper option for momentary or constant relay contact
  • Specifically for use with most 3-wire systems without a transformer
  • Accepts up tp 8 Security+ remote control codes and one keyless entry
  • Will work with LiftMaster Sears Craftsman or Chamberlain remotes with the yellow LED light - Sec+ format
  • Will work on 2 or 3 wire systems. If your system is 2-wire a 24-volt 85LM transformer is required
    • .......more details
CR2032

Maxcell 3V Lithium Button Cell

886LM

LiftMaster Motion-Detecting Control Panel Sec+ 2.0 *** To extent of inventory

  • Push button for garage door operation
  • Motion-detector automatically turns on the light when movement is detected
  • 150 degree sensing angle for motion sensor
  • Program remote controls directly from the control panel
  • Light run-time is 4 1/2 minutes with adjustable light timer option
  • On/Off switch for deactivation of motion-detecting function
    • .......more details
Installation Manual
.273_3-3/4"-LH

Torsion Spring .273 x 3-3/4" x 12ft LH Orange/Red

  • Wire size: .273
  • Inside diameter: 3-3/4"
  • Length: 12 ft
.243_3-3/4"-LH

Torsion Spring .243 x 3-3/4" x 12ft LH White/Yellow

  • Wire size: .243
  • Inside diameter: 3-3/4"
  • Length: 12 ft
.295_2"-LH

Torsion Spring .295 x 2" x 12ft LH Blue

  • Wire size: .295
  • Inside diameter: 2"
  • Length: 12 ft
41A5483-4C

LiftMaster Circuit Board Assembly *** To Extent of Inventory

  • Assembly includes: circuit board end panel and light socket
  • For belt drive units
  • Fits 2280 2580 WD822K(s) WD922K WD912K(S)
  • Also known as 41A5483-4 41A5483-4B
41C4470

LiftMaster Gear & Sprocket Assembly for ATS211

  • Complete Gear and sprocket assembly for ATS211 ATS211R built from 1993 - 2003
Installation ManualManuel d'Installation
24-24-1

LiftMaster Relay 24VAC 8-Pin DPDT Flange

41A5483-1C

LiftMaster Circuit Board Assembly *** Discontinued

  • Assembly includes: Circuit board and end panel
  • For chain drive units with one light
  • Fits models 2245 & 2255
  • Last letter of the part # indicates revision date the most recent product will be sent out
  • Also known as 41A5483-1 41A5483-1B
CAM005

Manaras Limit Cam 5/8-18 UNF

  • Limit cam for Mountshaft009
  • 2 cam's required per shaft
CAM011

Manaras Limit Cam

  • Limit cam for Mountshaft018A 018B
  • 2 cam's required per shaft
24-115-1

Relay 8 terminal 115VAC DPDT

  • For most operators with contactor
  • Will work on Liftmaster MH Lynx MCJH and more
.319_6"-RH

Torsion Spring .319 x 6" x 12ft RH Blue/Green

  • Wire size: .319
  • Inside diameter: 6"
  • Length: 12 ft
.343_5-1/4"-RH

Torsion Spring .343 x 5-1/4" x 12ft RH Blue/Red

  • Wire size: .343
  • Inside diameter: 5-1/4"
  • Length: 12 ft
.331_5-1/4"-RH

Torsion Spring .331 x 5-1/4" x 12ft RH Red/White

  • Wire size: .331
  • Inside diameter: 5-1/4"
  • Length: 12 ft
.437_3-3/4"-RH

Torsion Spring .437 x 3-3/4" x 12ft RH Red/Green

  • Wire size: .437
  • Inside diameter: 3-3/4"
  • Length: 12 ft
.421_3-3/4"-RH

Torsion Spring .421 x 3-3/4" x 12ft RH Gold

  • Wire size: .421
  • Inside diameter: 3-3/4"
  • Length: 12 ft
.343_3-3/4"-RH

Torsion Spring .343 x 3-3/4" x 12ft RH Blue/Red

  • Wire size: .343
  • Inside diameter: 3-3/4"
  • Length: 12 ft
.363_3-3/4"-RH

Torsion Spring .363 x 3-3/4" x 12ft RH Green/White

  • Wire size: .363
  • Inside diameter: 3-3/4"
  • Length: 12 ft
.319_2-5/8"-RH

Torsion Spring .319 x 2-5/8" x 12ft RH Blue/Green

  • Wire size: .319
  • Inside diameter: 2-5/8"
  • Length: 12 ft
.262_1-3/4"-RH

Torsion Spring .262 x 1-3/4" x 12ft RH Red/Yellow

  • Wire size: .262
  • Inside diameter: 1-3/4"
  • Length: 12 ft
12562

Doorlec Lower Brake Shoe - Left

  • Fits on all Doorlec operators equipped with brake shoes
  • Use with drum #12561
17310

Doorlec DC-3000T2 2-btn Transmitter 313 MHz

  • One block of 10 dip-switches for programming
  • Will activate 2 Doorlec 17307 receivers (DC-3000R)
  • Includes visor clip and 9V battery
Programming Instructions
H14G01

Hinge #1 x 14 gauge

  • Bright zinc plated 14-gauge steel hinge
  • For use with 7/16" diameter stem rollers
  • Full body hinge 2-3/4" wide
  • #1 position
  • Use between sections 1 and 2 or in the center position
  • Same as part number 241
    • .......more details
LIMIT006

Manaras Single Micro Limit Switch with Flat Lever

  • Fits old medium-duty Manaras operators such as MDJ
  • SPDT - Cherry
Limit Switch Chart
DRUM006

Manaras Steel Brake Drum Flat Track - replaces DRUM001

  • Replaces DRUM001
  • Brake drum for all operators except Gear Head models prior to 1999.
  • Use with BRAKEPART018
RADIO-KIT004

Manaras plug-in receiver for Board 70 operators 390 MHz

  • Direct ECB plug-in receiver card kit (RADIO-RE101C) for adding or replacing on-site.
  • Maximum 16 transmitters per receiver.
  • Compatible with transmitters RADIOEM101 and RADIOEM103 SD/MD
RADIO-EM103SD

Manaras 3-btn transmitter configured as O/C/S 1 door Rolling Code 390 MHz

  • Open/Close/Stop remote for 1 door
  • Operates single door: O/C/S configuration
  • LED indicator CR2032 battery and visor clip included
  • Field Selectable: Jumper inside the remote can be positioned to Single Door (SD) or Multiple Door (MD)
  • Compatible with Manaras operators manufactured after August 2013 with control board070E & board070M.
Manual
7145.96

Whiting Bottom Seal For Coldsaver 96" long

  • Aluminum retainer sold separately
6589

WhitingBrush Side Seal assembly for insulated doors

  • Fits Coldsaver and Tempguard
HAE00033

Linear 8ft Belt & Inner Slide Assembly (HBT8)

HAE00022

Linear Inner Slide Assembly - Belt (HBT)

HAE00047

Linear Complete Gear Set with Grease

  • Set includes: Helical gear worm gears and grease
  • Helical gear measures 2-7/8" diameter
219109

Capacitor 1/3 HP 43-53 MFD 250V

  • For LDO33 only
1336.8

Whiting Stainless Steel Roadside Top Closure Bracket for 8" radius

RV-200

2" Vinyl Insert for Brush Retainer per foot

  • Color: Black
300BL

3" Light Brush Insert 6ft Long

  • Polypropylene bristles
  • Same as model MS1705
600BL

6" Light Brush Insert 6ft Long

  • Polypropylene bristles
4010-12FT

Aluminum Retainer only for Light Brush 12' Long 180 degree

  • For angle application (180 degree)
  • For use with Light Brush or Vinyl Insert
4001-12FT

Aluminum Retainer only for Light Brush 12' Long 45 degree

  • For angle application (45 degree)
  • For use with Light Brush or Vinyl Insert.
4001-6FT

Aluminum Retainer only for Light Brush 6' Long 45 degree

  • For angle application (45 degree)
  • For use with Light Brush or Vinyl Insert.
1006-1-1/2-10'

Rigid Vinyl Bottom Retainer U-Shaped 10' Long

  • Black with flexible fin to touch door face.
  • For door thickness 1-1/2"
1104-8FT-BROWN

Residential Side & Top PVC Weather-Strip with cap 8' Long - Brown (N)

  • Brown rigid vinyl retainer with brown flexible vinyl seal.
  • Dual fin vinyl.
  • Comes with cap to hide screws.
BLOCK-YELLOW

Spring Repair Blocks .3175-.3625 Pair

  • For the temporary repair of a broken spring.
  • Wire size: .3175 - .3625
1104-16FT-CREAM

Residential Side & Top PVC Weather-Strip with cap 16' Long - Cream (C)

  • Cream rigid vinyl retainer with cream flexible vinyl seal.
  • Dual fin vinyl.
  • Comes with cap to hide screws.
  • Also known as Almond
1104-8FT-CREAM

Residential Side & Top PVC Weather-Strip with cap 8' Long - Cream (C)

  • Cream rigid vinyl retainer with cream flexible vinyl seal.
  • Dual fin vinyl.
  • Comes with cap to hide screws.
  • Also known as Almond
1104-10FT-SAND

Residential Side & Top PVC Weather-Strip with cap 10' Long - Sandstone (D)

  • Sandstone rigid vinyl retainer with sandstone flexible vinyl seal.
  • Dual fin vinyl.
  • Comes with cap to hide screws.
  • Also known as Taupe
1104-7FT-SAND

Residential Side & Top PVC Weather-Strip with cap 7' Long - Sandstone (D)

  • Sandstone rigid vinyl retainer with sandstone flexible vinyl seal.
  • Dual fin vinyl.
  • Comes with cap to hide screws.
  • Also known as Taupe
1106-24-BLACK

Commercial Side & Top Weather-Strip 24' Long - Black

  • Aluminum retainer with black dual fin vinyl
7001-7-WHITE

Commercial Side & Top Weather-Strip 7' Long - White 7001-WW (W)

  • White galvanized steel with white dual fin vinyl.
  • Commercial and Residential use.
  • Steel is notched on both ends for easier installation.
1106-16-BLACK

Commercial Side & Top Weather-Strip 16' Long - Black

  • Aluminum retainer with black dual fin vinyl
1106-18-BLACK

Commercial Side & Top Weather-Strip 18' Long - Black

  • Aluminum retainer with black dual fin vinyl
1102-24-BLACK

Commercial Side & Top Weather-Strip 24' Long - Black

  • Aluminum retainer with black heavy-duty dual fin vinyl.
25-42-70

Extension Spring 7' Door - 70 lbs Orange

  • Double - Loop
  • 25" long 42" stretch 70 lb load
  • Sold individually
  • Rated for 10000 cycles
Spec Sheet
25-42-60

Extension Spring 7' Door - 60 lbs Brown

  • Double - Loop
  • 25" long 42" stretch 60 lb load
  • Sold individually
  • Rated for 10000 cycles
Spec Sheet
33LMC

LiftMaster 3-btn O/C/S Transmitter 390MHz *** Available to Extent of Inventory** use 813lmx

  • 390 MHz 9 dip switch three button visor remote
  • Can be used for Open/Stop/Close when used with the LiftMaster 423LMC receiver.
  • Visor clip & 12V battery included (ALK12V)
  • Same as 33LM
  • Can be used as a substitute for 63LMC
Programming InstructionsInstructions de programmation
94-00002

Truck Door Clevis Pin 1/4" x 7/8"

  • Zinc Plated finish
  • 1/4" x 7/8"
91-00400

Truck Door Step Bolt 1/4"-20 x 1.25" (3/4" head)- Sold Per Piece

  • Zinc plated finish
  • Cross Reference: T #80015-1610 120250
26-94321

Truck Door Bottom Panel with Seal (11" x 98") for Whiting Dryfreight

  • These panels are cut to an extra wide width to fit wider vehicle applications.
  • Interlocking tongue and groove design for weather-tight joint and proper panel alignment.
  • These panels have no routs and shipped without holes.
  • 3/4" thick 7 ply exterior grade medium density plywood. Primer Finish
  • Comes only with bottom retainer and seal (installed)
25E10311

Truck Door Heavy- Duty Lift Handle Black E-coat finish

  • Wide grip design
  • Black E-coat finish
  • Works with both Whiting and Todco Doors
R5999

Shaft Collar 1" with 1 Set Screw

  • Set Screw: 5/16 x 18
SF200

Spring Fitting 2" Pair

  • Unviversal thread for use in either LH or RH wound springs.
  • Pair includes: (1) winding and (1) stationary.
  • Maximum wire size diameter: .3065".
  • Set screw installed: 3/8"-16 x 1" (2).
  • Mounting: 1" tube or solid shaft
  • Winding bar hole 1/2"
    • .......more details
H11G10

Hinge #10 x 11 gauge

  • 11 gauge # 10 hinge - 0.92 lbs
  • Bright zinc-plated steel construction
  • For use with 7/16" stem rollers
H11G05

Hinge #5 x 11 gauge

  • 11 gauge # 5 hinge - 0.76 lbs
  • Bright zinc-plated steel construction
  • For use with 7/16" stem rollers
CBA18B07

Cable Assembly 1/8" 7x19 102" Sold per Pair

  • Galvanized cable assembly for a 7ft door (102" = 8'6")
  • Aircraft cable made of 19 wires per strand and 7 strands per cable
  • Sold as a pair
  • Same as part number 457
CB3160500

Cable 3/16" 7x19 500' Galvanized

  • Galvanized cable 3/16" 7x19 500ft spool.
  • Cable break strength: 4200 lbs
Comparison charts
CB5320500

Cable 5/32" 7x19 500' Galvanized

  • Galvanized cable 5/32" 7x19 500ft spool.
  • Cable break strength: 2800 lbs
Comparison charts
RN1124

Roller 2" Nylon 4" stem 11 ball White

  • White Nylon Roller Wheel Diameter: 2"
  • Working Length: 3.75" Overall Length: 4.69"
  • Box qty: 150 Box weight: 49 lbs (2-4-11 White Nylon)
R5200

Pulley 3" HD Yellow Zinc Plated Steel 200lb Max

  • Bored for 3/8" diameter bolt
  • Maximum cable diameter: 1/8"
  • Riveted with Ball Bearing
R5201

Cast Iron Pulley 3"

  • Bored for 3/8" diameter bolt
  • Cable diameter: 1/8"
  • Cast iron pulley mounted on two pressed sealed bearings.
  • Radial Load: 400lb
BK258/PR

End Plate 2-5/8" flanged with bearing 13GA Sold as a Pair (L & R) (EBF 258)

  • Sold as a pair
  • Box quantity: 30
25-10200

Truck Door Top Bracket Assembly for Todco Roll-Up Doors

  • Steel construction Zinc plated
  • Heavy-duty design
  • Assembly includes: Base Slide Bolt & Washer
  • Cross Reference: T #69433 W #4039
25-01435

Truck Door Stainless Cables 110" 5/16 eye 7x19 Pair for Roll-Up Doors

  • Works with both Whiting and Todco doors
  • Aluminum eye ends are used (only on 5/16" eye cables)
  • Cable size: 1/8"
CUSTOM4X6PO

Devanco Loop 4'x6' rigid-pvc pave-over

  • Ideal for use on with gravel driveways or sufaces that are to be asphalted
  • Features a twisted lead-in to reduce the chances of interference and false detections.
  • Direct burial loops should be buried approximately 6" deep
Installation InstructionsInstructions d'installationSpec SheetBrochureLoop Placement GuideGuide de positionnement des boucles
6X10SC50

Devanco Loop 6' x 10' saw-cut 50' lead-in

  • Manufactured to the highest quality standards to ensure accurate detection our Pre-formed loops come with a 50 foot twisted lead-in ware and available lead-in lengths up to 500 feet.
  • Ideal for use on existing asphalt or concrete surfaces
  • Features a non spliced continuous wire throughout loop turns and lead-in.
  • requires the use of loop sealer when being installed to ensure long lasting trouble-free detection
Installation InstructionsInstructions d'installationLoop Placement GuideGuide de positionnement des boucles
4X6SC50

Devanco Loop 4' x 6' saw-cut 50' lead-in

  • Manufactured to the highest quality standards to ensure accurate detection our Pre-formed loops come with a 50 foot twisted lead-in ware and available lead-in lengths up to 500 feet.
  • Ideal for use on existing asphalt or concrete surfaces
  • Features a non spliced continuous wire throughout loop turns and lead-in.
  • requires the use of loop sealer when being installed to ensure long lasting trouble-free detection
Installation InstructionsInstructions d'installationLoop Placement GuideGuide de positionnement des boucles
1104-10FT-WHITE

Residential Side & Top PVC Weather-Strip with cap 10' Long - White (W)

  • White rigid retainer with white flexible vinyl.
  • Dual fin vinyl.
  • Comes with cap to hide screws.
36196A

Genie Sprocket Saddle

  • Sprocket Saddle for Genie PMX Chain Drive Openers With T Rail
  • Uses # 27191A.S Sprocket ( Not Included)
HAE00049

Linear Drive Sprocket Holder and Belt Clamp

COVER047

Manaras C-Box ABS/PC Green Cover with STICKER079

  • Fits most Manaras models
R1

Erone Radium 1-Channel Key Chain Transmitter 433MHz

  • Designed for the control of automatic closing systems and anti-burglar systems thanks to its very high security coding system (KeeLoq® Hopping code).
  • The code sent by the transmitter changes at each activation avoiding any scanning and copying risk.
  • A special algorithm allows to keep synchronized transmitter and receiver.
  • Range up to 250 m (820 ft)
  • Ergonomic rugged & durable
  • Battery: Two 3V lithium battery (CR2016)
    • .......more details
Wireless System Chart
SMR7620TP5

Telco Thru Beam Receiver M18

  • Supply voltage: 10 - 30 V dc
  • Control Feature: Sensitivity pot. and light/dark switch
  • Sensing range: 20 m
  • Output Status: N.C./N.O.
  • Housing: 18 x 1 Plastic
  • 5M cable
    • .......more details
41A5021-5I

LiftMaster Electronic Circuit Board Assembly 390MHz *** NLA

  • 1 piece logic board with end panel
  • Used on 390Mhz Security+ AC belt drive operators made from 1997 to 2005.
  • Unit will have a red/orange learn button
  • Also know as 41A5021-D 41A5021-5E 41A5021-5F 41A5021-5G 41A5021-5H 041A5021-5I
MB-01012

Micanan Electric Motor for Pro LH only 1/2HP 575V 3PH

  • This will only work in the Pro LH operator.
1005-2-10'

Aluminum Bottom Retainer U-Shaped 10' Long**Actual Length 10'1"***

  • For door thickness 2"
PRO-PL-INV-200-23

Micanan Wall Mounted Control Panel with Variable Frequency Drive Mod. 2HP 230V 3 PH

  • Additional charges apply for adding PBS on cover or if panel is not ordered with an operator
OPH-6532-CONT-R

Manaras Opera-H 1/2HP 600V 3Ph Contactor Model Right Hand

  • A heavy-duty industrial jackshaft operator.
  • For use on Standard High and Vertical Lift sectional doors.
  • Can also be used on Rolling doors or Grilles.
  • Comes with a self-engaging chain hoist for manual operation.
  • Clearence: side room required 15"
Installation ManualSell Sheet
CF-101-8

Commercial Side & Top Weather-Strip 8' Long Aluminum / Vinyl

  • Same as Garaga CF101
ME123-YELLOW-U

Miller Edge Yellow Universal Outlet 2-Wire 2" wide x 1-1/2" high Sold by the Foot

  • Electromechanical slide in edge for sectional doors and sliding gates.
  • Touch sensitive singaling allows for immediate stopping and reversing of motion
  • Temperature range: -30F to 155F
  • Lead wire: 22 gauge universal
  • Sensitivity: nominal 6-8 PSI
  • 2 wire NO configuration
    • .......more details
Installation ManualWorksheetSell Sheet
K001A6424

LiftMaster Circuit Board Assembly Kit 2010 and later 315 MHz

  • UL325 Replacement circuit board for Medium-Duty Logic Commercial Operators
  • Used on models MJ MH MHS MT BMT and MGJ (UL325 compliant operators)
  • 315 MHz intergral radio receiver accepts 20 Sec+ remotes or unlimited dip switch
Installation Manual
DM11VL

Cable Drum Vertical Lift 11' 850-11 Pair

  • 11' Vertical Lift aluminum die cast alloy.
  • 3/8"-16 x2" hardened cup point set screws installed with red heads.
  • Color coded: Red=LH and Black=RH. Pair includes (1) LH and (1) RH. Max. Door Height: 11'-1".
  • Rated Lift per Drum: 425 lbs.
  • Max. Cable Diameter: 3/16".
  • Mounting: 1" solid shaft with 1/4" keyway.
    • .......more details
23-10916

LiftMaster Interlock Switch SPDT

  • Interlock switch for LM commercial door openers with hoist disconnects
  • 15A 125/250VAC
DC500-125

Dyna-Hoist DC Series Direct Drive Opener 1/2 HP 110/240V 1ph w/1-1/4" Shaft ** Price by Quote Only

  • The direct drive operator consists of a DC electric motor directly coupled to a hollow shaft (30:1 reduction) worm gear reducer designed to install over keyed door shaft.
  • Continuous duty 0.5 HP 90 V DC 1750 rpm motor suitable for 110 to 240 V 1 PH and 60 Hz power supply.
  • Comes with integral absolute encoder to control the door travel
  • 24 V 5 amps back-up battery pack and 3/8” ratchet socket to accept and crank for manually operating the door in case of power failure
  • Programmable wall mountable UL325 compliant NEMA 4X control panel with LCD display and OPEN-CLOSE-STOP buttons on cover
  • Nema 4 photocell
    • .......more details
Pulse Series Installation ManualsDC Series Brochure
ETB-311-1/2HP

Doorlec 1/2HP 115V Trolley Door Opener TEFC Motor

  • Trolley model heavy-duty door operator designed to provide smooth dependable operation of sectional overhead type doors.
  • DC2000 Logic Controller
  • Comes with standard O/C/S push button station
27-20127

Truck Door Spring Spacer 35" long for Whiting Roll-Up Doors

  • Extruded PVC construction with zinc plated thrust washer.
  • Cross Reference: 2471
ZT37028235

Firestar Shutter 540 Galv with Lock & Key

1104-18FT-BROWN

Residential Side & Top PVC Weather-Strip with cap 18' Long - Brown (N)

  • Brown rigid vinyl retainer with brown flexible vinyl seal.
  • Dual fin vinyl.
  • Comes with cap to hide screws.
  • Full case quantity only (12).
172845

Disconnect Chain Hoist Wall Mount 4:1 Torque Force

  • Wall mounting
  • 4:1 reduction
  • Maximum pull allowed on hand chain is 35lb
  • Includes (1) 41B36 sprocket with 1” bore 4’ of #41 roller chain 26’ of hand chain (1) chain keeper (2) set screws 5/16"-18 and limit switch
Sell sheet