Devanco Canada - Get The Right Garage Door Opener‎ and Parts

25-60052

Truck Door Latch Plate for Whiting Roll-Up Doors

Steel construction Plain finish
Contoured for proper lock engagement
Cross Reference: W #2804

Z9955

Spring Gauge

Ruler style spring gauge
Stainless steel
Confirms spring ID & wire size
Place formed end between 2 coils count 20 coils to obtain wire size

DM18-125

Cable Drum Vertical Lift 18' 1100-18 (1-1/4") Pair

18' Vertical Lift aluminum die cast alloy cable drums for 1-1/4" shaft.
3/8"-16 x2" hardened cup point set screws installed with red heads.
Color coded: Red=LH and Black=RH. Pair includes (1) LH and (1) RH.
Max. Door Height: 18'-1".
Rated Lift per Drum: 660 lbs.
Max. Cable Diameter: 3/16".

.......more details

SF600U

Spring Fitting 6" Pair Universal Thread Stationary + Winding for 1" Shaft

Universal thread and is available for 1" or 1.25" Bore - must specify when ordering.
Pair includes: (1) winding & (1) stationary.
Not single thread.
Winding bar hole 5/8"

SF258

Spring Fitting 2-5/8" Pair

Universal thread for use in either LH or RH wound springs.
Pair includes: (1) winding & (1) stationary.
Maximum wire size diameter: .3310".
Set screw installed: 3/8"-16 x 1" (2).
Mounting: 1" tube or solid shaft - min. 1/2 turns on set screws.
Winding bar hole 1/2"

.......more details

CBB125

Stop & Sleeve 1/4" 100 pair

Includes 100 stops and 100 oval sleeves

H11G04

Hinge #4 x 11 gauge

11 gauge # 4 hinge - 0.72 lbs
Bright zinc-plated steel construction
For use with 7/16" stem rollers

EP2983

Exhaust Port 4" non latching long barrel

Inside diameter: 4"
Outide diameter: 4-3/8"
Sleeve: 2" (non latching)
Flange: 6"
Includes fasteners & gaskets.
Polished aluminum finish.

.......more details

CBA18A07

Cable Assembly 1/8" 7x7 102" Sold per Pair

Galvanized cable assembly for a 7ft door. (102" = 8'6")
Sold as a pair

CB332A0500

Cable 3/32" 7x7 500' Galvanized

Galvanized cable 3/32" 7x7 500ft spool.
Cable break strength: 920 lbs.

Comparison charts

RS1039

Roller 3" Steel 9" stem 10 ball - To Extent of Inventory. Replaced by RS1039-C

Steel Roller Wheel diameter: 3"
Working length: 8.5"
Overall length: 9.64"
Box qty: 60 Box weight: 49.6 lbs (3-9-10 Steel)

RS1037

Roller 3" Steel 7" stem 10 ball

Steel Roller Wheel diameter: 3"
Working length: 6.5"
Overall length: 7.75"
Box qty: 75 Box weight: 34.2 lbs (3-7-10 Steel)

R5209

Cast Iron Pulley 4"

Bored for 3/8" diameter bolt
Maximum cable diameter: 1/4"
Cast iron pulley mounted on two pressed sealed bearings
300lb load rating

R5211

Cast Iron Pulley 5" with stud

5" Cast Iron Pulley with double stud
cast iron pulley mounted on two pressed sealed bearings
Maximum cable diameter: 1/4"

R5200

Pulley 3" HD Yellow Zinc Plated Steel 200lb Max

Bored for 3/8" diameter bolt
Maximum cable diameter: 1/8"
Riveted with Ball Bearing

903024ORBG

Operator Reinforced Bracket 24" Galvanized

Comes with clevis & clip pins. 12 per carton.

25-10311

Truck Door Heavy-Duty Lift Handle Zinc

Heavy-duty wide grip design
Zinc plated finish
Cross Reference: T #61401 W #1715 250000

BK312

Jamb bracket J-12 #12 12 gauge

Sold by the piece
Height 5.0" Length 1.9" Width 2.45"
Bright zinc plated 12 gauge steel
2" long track mounting slot accepts 5/16" track bolts

41A2817

LiftMaster Drive Gear and Worm Kit (No Sprocket)

Also known as: 081B0045 062216 081C0179 81B45 2612159

Installation Manual Manuel d'Installation

25-10200

Truck Door Top Bracket Assembly for Todco Roll-Up Doors

Steel construction Zinc plated
Heavy-duty design
Assembly includes: Base Slide Bolt & Washer
Cross Reference: T #69433 W #4039

6X20PO50

Devanco Loop 6' x 20' pave-over 50' lead-in

Ideal for use on with gravel driveways or surfaces that are to be asphalted
Features a twisted lead-in to reduce the chances of interference and false detections.
Direct burial loops should be buried approximately 6" deep

Installation Instructions Instructions d'installation Spec Sheet Brochure Loop Placement Guide Guide de positionnement des boucles

4X33PO50

Devanco Loop 4' x 33' pave-over 50' lead-in

Ideal for use on with gravel driveways or surfaces that are to be asphalted
Features a twisted lead-in to reduce the chances of interference and false detections.
Direct burial loops should be buried approximately 6" deep

Installation Instructions Instructions d'installation Spec Sheet Brochure Loop Placement Guide Guide de positionnement des boucles

25-01431

Truck Door Stainless Cables 105" 5/16 eye 7x19 Pair for Roll-Up Doors

Works with both Whiting and Todco doors
Cable size: 1/8 "

1104-8FT-WHITE

Residential Side & Top PVC Weather-Strip with cap 8' Long - White (W)

White rigid retainer with white flexible vinyl.
Dual fin vinyl.
Comes with cap to hide screws.

27-48-130

Extension Spring 8' Door - 130 lbs Yellow

Single - Loop
27" long 48" stretch 130 lb load
Sold individually
Rated for 10000 cycles

Spec Sheet

10FT-TROLLEY-SET

LiftMaster 10' Track Set for Trolley Operator 10-5810-P (2 pcs) *Actual length 155"*

Actual Length 12' 11"
Includes 2 pieces of 10-5810-P

1336.5

Whiting Stainless Steel Curbside Top Closure Bracket for 10" radius

93-00240

Truck Door Spacer Washer for Rollers

Used with Rollers to help adjust Roll up doors
Cross Reference: T #80020 W #6 #66 140100

1006-1-1/2-8'

Rigid Vinyl Bottom Retainer U-Shaped 8' Long

Black with flexible fin to touch door face.
For door thickness 1-1/2"

.312-5-1/4-LH-C

Torsion Spring .312 x 5-1/4" x 144" LH Coated ** Price by Quote Only

Black Oxide coating
Wire size painted on spring
Wire size: .312 ID: 5-1/4" Length: 12 ft

1003-4"-YELLOW

Bottom U-Rubber 4" Yellow 200' Long

4" yellow vinyl insert 200ft spool.

26-40200

Truck Door Head Seal Only 96" Long for Roll-Up Doors

Seal molded from long lasting rubber
Cross Reference: T #69718 630300

PBTL3-BLACK

Replacement Button Only - N/O Open / Close Black

N/O switch and rubber cover for PBTL-3

111854.0002

Overhead Logic Board for RSX 3/4 & 1 HP 1PH

Description: KITPCB1PH3/4-1HPSX/HXUL10
For RSX ad RHX models 3/4 & 1 Hp Single phase operators

108D36

LiftMaster Light Lens (K108D0036-2)

Compatible with one light operators
Compatible with the following Liftmaster models: 1040 1045 1055 100WD 200WD 1140 1145 1155 110WD 210WD3 1240 1245 1255 215WD 15WD 1240R 1245R 1255R 985 1046 1146 1246 1246R 1056 1156 1256 and 1256R
Compatible with the following Chamberlain models: 2000 2100 and 2200
Dimensions are 7-1/4" wide X 4-3/4" high X 3" deep

K20-1075B2LPH24

LiftMaster Electric Motor 3/4 HP 115V/208V/230V 1Ph Logic 5

Standard base mount 3/4 hp motor for new L5 operators
Also known as: 20-1075B-2LP K20-1075B-2P-H24 K20-1075B-2LP

L-7-50-0-M

Cable Tie Standard 50 LB Black 7" Nylon 1000/pkg

Ultraviolet Resistant

K-T5011L4

LiftMaster Electrical Box Replacement Kit L4 K-T74-33015-1 ** Price by Quote Only

For models APT T SD 115V 1Ph L4

12-000I

Secure Brands Keypad with Intercom Post Mount

Post mount with Intercom
RemotePro KP 26 bit wiegand output keypads
Available in three different mounting configurations: post single gang or flush.
All single gang RemotePro KP models are available with a silver aluminum faceplate.
A heavy duty metal keypad is used with all exterior models providing years of trouble free entry.
Post mount models feature a stainless steel faceplate in a heavy metal powder coated enclosure with nightlight.

.......more details

CPT-210-50

Miller Edge Bulk Extrusion 50 ft Roll

For do-it-yourself edges on sectional or rolling doors.
Black
End plugs adhesive and mounting channel sold separately.
Sensing edge size: 1-5/8"H x 1-3/4"W
When combined with the ME123 mounting channel it can be installed on doors measuring 1-1/2" to 2" thick.

Installation Manual Sell Sheet

TB612-14SF

Steel Faced Laminated Bumper Black 12" x 14" 6 3/4" Projection Horizontal Installation

Used on docks where excessive friction from up and down trailer movement occurs (yard jockeys air ride trailers etc.).
Can be used in material handling application where medium to heavy dock protection is required
“Gliding” heavy-duty steel face is 3/8” thick and independently anchored with elongated holes to face of bumper allowing bumper to compress AND offer high surface abrasion resistance
Rubber pads laminated between steel angles and secured with 3/4” rods
Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
Wall mounting hole size is 7/8” diameter.

.......more details

SPRAY-265

Aluminum Touch Up Spray Paint Antique Brown / Brun Antique #265/165 *** To Extent of Inventory

140g

AM-PC

Linear Proximity Cards - Linear Format ACP00739 25/Pkg

The Model AM-PC Proximity Card is a Wiegand format proximity type access control card with a slot for attaching to a key ring use with AM-PR proximity reader.
Passive operation
Low-cost
Durable
25 piece bulk pack minimum order
Dimensions: 3.4" L x 1.9" W x 0.13" Thick

.......more details

2234.596

Whiting Coldsaver Bottom Panel 13-1/2" x Max 96" with lock seal and retainer ** Cut to Length

Fits Coldsaver Roll-Up Doors
1-1/8" thick 96" wide
Includes Lock and keeper

CLUTCH-SHAFT-AS

Lynx Complete Clutch Shaft Assembly for HDC Operators 3/4" x 17-1/2"

Fits all HDC operators - waterproof or not.

26-94525

Truck Door Intermediate Panel (15" x 98") for Whiting Dryfreight

These panels are cut to an extra wide width to fit wider vehicle applications.
Interlocking tongue and groove design for weather-tight joint and proper panel alignment.
3/4" thick 7 ply exterior grade medium density plywood. Primer finish

41A5483-1C

LiftMaster Circuit Board Assembly *** Discontinued

Assembly includes: Circuit board and end panel
For chain drive units with one light
Fits models 2245 & 2255
Last letter of the part # indicates revision date the most recent product will be sent out
Also known as 41A5483-1 41A5483-1B

101475

Insert Bearing 1-1/4" Bore SB206-20

CABLE_1/4SS-500

Cable 1/4" 7x19 500' Stainless Steel

CBB332

Stop & Sleeve 3/32" 100 pair

Includes 100 stops and 100 oval sleeves

PRO-APT-5011-U

Micanan 1/2HP 115V 1P Apartment Trolley Operator N1 Eyes Monitored ECB (PRO APTE)

Low clearance design for APT applications (9.5")
Door speed: 12" per second
Monitored board
On-Board receiver holds up to 20 transmitters

Installation manual Specification sheet

373LMC

LiftMaster 3-btn Security+ Transmitter 315MHz

Visor clip and 3V lithium button cell (CR2032) battery included.
Same as Chamberlain model 953D

373LMC Manual

IRB-EXP

EMX Industries Explosion Proof Through-Beam Photocells 1162-1

Designed to operate in areas with explosive environments.
NEMA 4 and 7 housing
NEC Class I Groups B C & D Class II Groups E F & G CSA certified CENELEC certified EExd IIC.
Copper free Aluminum with Epoxy finish.
Potentiometer range adjustment to allow more precise tuning to site.
Through beam design is not affected by shiny surfaces.

.......more details

Installation Manual Sell Sheet

.283_2-5/8"-RH

Torsion Spring .283 x 2-5/8" x 12ft RH White

Wire size: .283
Inside diameter: 2-5/8"
Length: 12 ft

053156

Magnetic Mount Micro Dome Beacon Amber ** To Extent of Inventory

60 LEDs 360 degree revolving flash / intermittent flash
-30 degree celsius to + 50 degree celsius extreme temperature reliability

15-41B10G1

Sprocket 41B10T 3/4" Bore

Also known as: 15-41B10GXX 15-41B10G1 155010

ALUM-801

Aluminum 24" x 100' Spool White / Blanc # 801

20% thicker than the aluminum sold in retail stores (0.022" )
Aluminum on the reverse side
Gentek # 801

Colour chart

.295-2-R

Cut-to-Length Torsion Spring .295 x 2" Right Hand Wound Blue

Priced per inch - cones sold seperately
For factory installed cones use part no. C-200-INSTALLED

12513

Doorlec Pocket Wheel with 1" Oilite EHJ

C20-32F

Bearing 1-1/4" x 2" Press Fit C20-32F+GR 400 LBS

Stamped bearing for lighter loads
For a heavier duty machined bearing use R5114

MOD050

Manaras Friction Clutch Mod. #50 Chain Gear Head Operators

Installed directly on the output shaft of the operator.
Provides added protection by causing the clutch to slip when the door systems requires adnormal torque to be operated.
Includes sprocket for #50 chain
Operator mounting side must be specified
A spreader bar cannot be used in conjunction with this modification
This modification applies to OGH and MGH operators

.......more details

K-73BG770-3311

LiftMaster Service Kit E-Box for BG770

RESET005

Manaras Resettable Overload Fuse 8A 1 Phase

SLR-221

Linear Residential Slide Gate Op. 1/2HP 230V 1 Ph - Cold Weather Package NOT Included

Integral entrapment sensing system with digital set point for quick accurate adjustment and enhanced safety
Continuous-tone entrapment alarm with reset button
LED diagnostic display for ease of setup and troubleshooting
Selectable pre-start and run alarm with provision for ADA compliant visual pre-start and run alarm
Regulated 24 Volt DC power available for access control accessories
Integrated maximum run and auto close timer (0-9 minutes)

.......more details

K74-16420

LiftMaster Limit Switch Kit for LGO **DISCONTINUED

Installation Manual

MB-02001

Micanan Electric Motor Only 3/4HP 110/220V 1PH

Base Mount motor O.D.P. FR56
Used on Micanan's T TB APT J EJ H EHJ HHD & SD

MK00707

Micanan Varistor Harness 110V with Black Wires

Q223

LiftMaster Control Board Master / Second (K001A5869) *** Discontinued

Replacement control board for the Miracle-One gate operator with two arms - Master / Slave.
Same as part no. K001A5869

LVB620-11

Laminated Bumper Black 6" Projection Vertical Installation 20" x 11" Sold Individually

For use in low to medium traffic loading docks in factories and warehouses.
Can be used as rub rails at the sides of truck wells
Fabric reinforced rubber pads cut from recycled truck tires.
Rubber pads laminated between steel angles and secured with 3/4” rods
Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
Wall mounting hole size is 7/8” diameter.

.......more details

LB610-36

Laminated Bumper Standard Black 10" x 36" 6" Projection Horizontal Installation

For use in low to medium traffic loading docks in factories and warehouses.
Can be used as rub rails at the sides of truck wells
Fabric reinforced rubber pads cut from recycled truck tires.
Rubber pads laminated between steel angles and secured with 3/4” rods
Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
Wall mounting hole size is 7/8” diameter.

.......more details

PEDALU4272

Aluminum Pedestal Post Dual Height 42" & 72"

Pedestal post with hood
High quality aluminum
42" & 72"
Dual face-plate allows for easy wire connections

Shop drawing

7119405

FAAC 400 Plug for End Cap

PRO-J-5083-U-LH

Micanan 1/2HP 208V 3P Jackshaft Monitored ECB N1 Eyes Left Hand

On board receiver with antenna
Continuous duty industrial motor with overload protection
Heavy duty 5L V-belt
Adjustable friction clutch
Solenoid brake (optional PRO-JB) recommended for large doors
3/4" permanently lubricated & sealed precision ball bearings on pulley shaft

.......more details

Specification Sheet

BOARD075E

Manaras Replacement Board Kit (No Monitoring)

Replacement kit that includes BOARD070E (control board) & BOARD066R (power board)
BOARD070E is for standard operators without the monitoring function
For all Manaras operators built after October 2010
On-board 390MHz radio receiver accepts 50 remote controls
For older models built before October 2010 use BOARD060 or replacement kit BOARD065

Replacement Chart Guide de remplacement

803

Fasteners Sleeve Anchor 3/8" x 3" 50/Box

Secure anchoring into concrete brick or block

7001-10-BLACK

Commercial Side & Top Weather-Strip 10' Long - Black (B)

Black galvanized steel with black dual fin vinyl.
Commercial and Residential use.
Steel is notched on both ends for easier installation.

ME123-YELLOW-U

Miller Edge Yellow Universal Outlet 2-Wire 2" wide x 1-1/2" high Sold by the Foot

Electromechanical slide in edge for sectional doors and sliding gates.
Touch sensitive singaling allows for immediate stopping and reversing of motion
Temperature range: -30F to 155F
Lead wire: 22 gauge universal
Sensitivity: nominal 6-8 PSI
2 wire NO configuration

.......more details

Installation Manual Worksheet Sell Sheet

MM00004

Micanan Frame Gearhead MSI0030

378LMC

LiftMaster Wireless Control Panel

Wireless control panel for 315 MHz Chamberlain openers
For use as a secondary wall control panel only
Mounting hardware and batteries included (CR2032)
Auxiliary button to open/close 2nd garage door

Programming Instructions Instructions de programmation

OPJ-6212-ECB

Manaras Heavy-Duty Jackshaft Operator 1/2 HP 240V with Electronic Circuit Board

An industrial operator designed for use on standard high and vertical lift sectional doors
Can also be used on rolling doors and grills
It incorporates a floor level disconnect mechanism for manual operation
25 cycles per hour 100 cycles per day
Continuous-duty single phase capacitor start or 3 phase motor open drip proof
Mechanical brake

.......more details

Installation Manual Sell Sheet

PRO-HBH-10023U-L

Micanan 1 HP 230V 3P Heavy-Duty Jackshaft N1 Eyes Monitored ECB Left Hand (Pro-HHD)

1 HP230V 3 PH Industrial Continuous Duty Jackshaft Operator Ideal for Sectional Doors Rolling Steel
Monitored logic board with integral 372Mhz radio receiver that can hold up to 20 transmitters (MK-00647/ MK-00653/ MK-00659) or 200 of the 1 channel hand held transmitters (MK-00660).
N-1 Through-beam (MK-00649) photocells included. Other options available.
3-btn o/s/c (02-103) wall control station included
Adjustable Friction Clutch 5L320 drive belt
#50 Roller chain 18 tooth door sprocket included

.......more details

1007-1-5/8-12

Aluminum Bottom Retainer Flat Fits Doors 1-5/8 to 1-3/4" Thick

For door thickness of 1-5/8" to 1-3/4"

28-30015

Truck Door 1" Vertical Track with Holes 93.5" for Todco Roll-Up Doors

Galvanized steel 14 gauge construction
Holes drilled to allow for faster plug weld installation to frame
For use with 1" rollers

1324-1-3/4"-BLK

Elton Commercial Window 1-3/4" thick 1324 Black Frame Sealed Glass ** Discontinued

Screw together window kit
Plexiglas window
Frame size tip-to-tip: 26-3/4" x 14-1/2"
Cut-out size: 25-5/8" x 13-3/8"
Vision area: 23-7/8" x 11-9/16"
Different glass options and frame colours are available upon request

.......more details

3AG2

Miniature Fast Acting Glass Fuse 2 Amp 250V (5/pkg) - 766122

6 x 30mm miniature fast acting glass fuse
Rated voltage: 250V
Rated current:2A
ROHS compliant

XP4040CUSH689

Heavy Duty Door Closer

Heavy Duty Door Closer with Spring Cush-N-Stop Arm

RV-100

1" Vinyl Insert for Brush Retainer per foot

Color: Black
Fits in light brush retainers

SETR2641AM2KH

Erone 2-Channel Mini Transmitter with HID Tag Black 433MHz

With built-in HID tag
Heavy-duty construction
Elegant & easy to carry
Unobstructed range: 656 ft (200m)
60 x 36 x 16mm (2.35 x 1.4 x 0.6in)
Two lithium batteries (CR2016) included

.......more details

Wireless System Chart

70.32

Whiting Stainless Steel U-Bolt 1-1/4"

Sold per U-bolt

OCDFX3

Overhead Door 3-Btn Transmitter 315/390 Mhz

Dual Frequency transmitter that will work on all OHD/Genie brand 315 or 390 rolling code commercial openers including the the RX OHD commercial opener.
Part Number: OCDFX3.S GIDFX3.S

SC-6

Wheel Chock SC-6 Aluminum

Excellent Surface Grip on Tire and Ground
Lightweight Aluminum
Size: 6" wide x 6-1/2" long x 6" high

GM3T-BX

Genie Universal Master 3-Button Remote - 37344R

Three Button Master™ Visor Remote
This 3 button remote can be used with 3 Intellicode openers
Replaces all Intellicode Series I And Series ll remotes
Replaces 9 switch and 12 switch 390MHz Genie remotes
Works with all Genie model Gated Community Receivers
This remote will not work with 315MHz Canada 12 switches openers

.......more details

Programming Instructions Instructions de programmation

CR2032

Maxcell 3V Lithium Button Cell

02-108

Push Button Station 3-btn O/C/S Flush Mount Stainless Steel Faceplate

Nema 1
Standard 2X4 electrical junction box with stainless steel faceplate
OPEN/CLOSE/STOP allows complete control of the door

LA412DC

LiftMaster replacement 12VDC Solar Actuator Arm

he LA412 Arm runs on 12V and connot be subbed for LA400 Arm

OHJ-6432-ECB

Manaras Heavy-Duty Jackshaft Operator 1/2 HP 480V 3 Ph with Elect. Circuit Board

25 cycles per hour 100 cycles per day
An Industrial duty operator featuring both the patented Hoist-a-Matic a self-engaging chain hoist for manual operation as well as a floor level disconnect
Specifically designed to motorize grills when a manual egress is required
Mechanical brake
Hoist on right standard
Full overload protection

.......more details