Devanco Canada

 
User Name:
Password:
Remember Me:
Forgot your password
Request a Login
Home
K75-12586

LiftMaster Complete Brake Assembly GH 575V

  • Complete assembly includes: Brake hub kit Brake release lever Brake disk Spring cup Studs Compression springs Brake solenoid Solenoid cover Spacers Mounting plate Pressure plate Feather key and Fastener.
Installation ManualManuel d'installation
MGS20-B-2U-04

Miller Edge Sensing Edge Square Black 2-Wire Universal Outlet 4ft Long

  • Electromechanical edge for standard 2" round or square frame sliding sing and bi-part gates. •3-sided activation allows for immediate stopping or reversing of motion •Contours to round or square posts. •Temperature range: -30F to 155F •Lead wire: 18 gauge 2ft length •Sensitivity: nominal 6-8 PSI •2 wrie NO configuration •ANSI/UL325 recognized component •Cannot be bent •One year warranty
PRO-J-5053-U-LH

Micanan 1/2HP 575V 3P Jackshaft Monitored ECB N1 Eyes Left Hand

  • On board receiver with antenna
  • Continuous duty industrial motor with overload protection
  • Heavy duty 5L V-belt
  • Adjustable friction clutch
  • Solenoid brake (optional PRO-JB) recommended for large doors
  • 3/4" permanently lubricated & sealed precision ball bearings on pulley shaft
    • .......more details
Specification Sheet
.312-258-L

Cut-to-Length Torsion Spring .312 x 2-5/8" Left Hand Wound Yellow

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-258-INSTALLED
OPJ-6532-ECB

Manaras Heavy-Duty Jackshaft Operator 1/2 HP 600V 3 Ph with Elect Circuit Board

  • An industrial operator designed for use on standard high and vertical lift sectional doors
  • Can also be used on rolling doors and grills
  • It incorporates a floor level disconnect mechanism for manual operation
  • 25 cycles per hour 100 cycles per day
  • Continuous-duty single phase capacitor start or 3 phase motor open drip proof
  • Mechanical brake
    • .......more details
Installation ManualSell Sheet
OPH-6432-ECB

Manaras Opera-H 1/2HP 480V 3Ph with Electronic Circuit Board

Installation ManualSell Sheet
MP-00008

Micanan Two-Door Interlock Modification

  • Only allows one door to be opened at one time
PRO-HBH-7543U-L

Micanan 3/4HP 460V 3P Heavy-Duty Jackshaft N1 Eyes Monitored ECB Left Hand

  • 3/4 HP460V 3PH Industrial Continuous Duty Jackshaft Operator Ideal for Sectional Doors Rolling Steel
  • Monitored logic board with integral 372Mhz radio receiver that can hold up to 20 transmitters (MK-00647/ MK-00653/ MK-00659) or 200 of the 1 channel hand held transmitters (MK-00660).
  • N-1 Through-beam (MK-00649) photocells included. Other options available.
  • 3-btn O/S/C (02-103) wall control station included
  • Adjustable Friction Clutch 5L320 drive belt
  • #50 Roller chain 18 tooth door sprocket included
    • .......more details
LIMIT025

Manaras Single Snap-Action Limit Switch with Flat Lever

  • Replacement for LIMIT001
  • For all Manaras commercial operators prior to 2000 - except light duty models
  • Can be used on Doorlec Lynx and others
  • Unimax (SPDT)
Limit Switch Chart
541.3224.00

Whiting Outside Cam Lock w/Inside Release

  • An upcharge when ordering a Whiting door #3224 #77 & #7535.2-TG
K76-34697-3

LiftMaster APS Encoder with Harness 12V

  • For use with various LiftMaster® Commercial Gate Operator Models such as RSL12UL
H11G05-SS

Hinge #5 x 11 gauge Stainless Steel

  • Manufactured with 11ga. Rust-Resistant 304 Stainless Steel
  • Universal Design
  • Fits Most Overhead Sectional Doors
  • Priced Per Each
H11G02-SS

Hinge #2 x 11 gauge Stainless Steel

  • Manufactured with 11ga. Rust-Resistant 304 Stainless Steel
  • Universal Design
  • Fits Most Overhead Sectional Doors
  • Priced Per Each
5001-8-CREAM

Residential Side & Top Weather-Strip 8' Long - Cream

  • Painted aluminum retainer with flexible dual fin vinyl.
  • Residential use.
086565.1013.S

Overhead Door Chain RLR #25 x 62P Loop

GALV-243-334-R

Cut-to-Length Torsion Spring .243 x 3-3/4" Right Hand Wound Galvanized Price per Inch

  • Priced per inch
  • For factory installed cones priced seperately - use part no. C-334-INSTALLED
K23-34822

LiftMaster Open/Close Switch

  • For use with various LiftMaster® Commercial Slide Gate Operator Control Boxes
3B4X-SS

Control Station Exterior Stainless Steel Enclosure Surface Mount O/C/S N4X

  • OPEN-CLOSE-STOP Push Button
  • Stainless Steel Enclosure
  • Buttons aligned vertically
  • Dimensions: H=6-3/4"” W=3-1/2"” D=3-1/2"”
K80-5001

LiftMaster Keyway 3/16 x 3/16 x 1-3/4"

  • For use with various LiftMaster® Gate Operators and Perimeter Access Solutions
OSH-6114-M-N1-LH

Manaras Opera-SH 1 HP 120V 1 Ph Monitored w/N1 Eyes Left Hand

  • An ultra high-end heavy-duty V-belt drive industrial jackshaft operator
  • For use on Standard High and Vertical Lift sectional doors
  • Can also be used on Rolling doors and Grilles
  • Comes with a chain hoist for manual operation and a floor level engaging device
  • Clearence: side room required 16"
  • 25 cycles per day > 100 cycles per day
    • .......more details
Installation Manual
PRO-GH-10023U-R

Micanan 1 HP 230V 3P Gearhead Op. N1 Eyes Monitored ECB Right Hand

  • Designed for use on all rolling doors and grilles and for large sectional doors with high or vertical lift.
  • Full function smart 10.0 logic board featuring on-board receiver with antenna and enhanced program selections.
  • External radio control terminal strip
  • Three button O/C/S control station Nema-1
  • Supplied with Nema-1 photocells
  • Emergency chain hoist with electrical cut-out switch for manual operation
    • .......more details
2376.156.19.780

Whiting Torsion assembly .156 wire size 19" spring length 78" shaft

TDC1222-18

Liftmaster Comm. 18FT Trolley Angle set (10-5818-P x 2) and #41 chain pack (TDC41-18) ***Actual length 251"***

  • Double Angle Rails for doors up to 16'6" high
  • Includes #41 chain pack
GALV-295-6-R

Cut-to-Length Torsion Spring .295 x 6" Right Hand Wound Galvanized Blue Price per Inch

  • Priced per inch - cones & filler sold seperately
  • For factory installed cones use part no. C-600-INSTALLED
GALV-250-2-R

Cut-to-Length Torsion Spring .250 x 2" Right Hand Wound Galvanized Green Price per Inch

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-200-INSTALLED
GALV-331-258-144-L

Torsion Spring .331 x 2-5/8" x 12ft LH Galvanized Red/White

  • Wire size: .331
  • Inside diameter: 2-5/8"
  • Length: 12 ft
  • Galvanized
GALV-243-334-144-R

Torsion Spring .243 x 3-3/4" x 12ft RH Galvanized White/Yellow

  • Wire size: .243
  • Inside diameter: 3-3/4"
  • Length: 12 ft
  • Galvanized Stenciled
EMX-1916-1

EMX Single Gold Hood For IRB-MON2/4X2 1 Piece Only

  • Gold coloured metal hood (1 hood)
S6TL2641E15

Erone 18-Channel Handheld Transmitter 433MHz

Wireless System Chart
BEA-10PS12-24

BEA Power Supply UL/ULC Listed

MOTOR271-WIRED

Manaras Electric Motor1/2HP 208/460V 3PH

  • This item is compatible with BRAKE011
K77-50336

LiftMaster Washer and Nut Only for Traveler Carriage Q232

  • Compatible with various LiftMaster® Swing Gate Operators
2376.187*29.900

Whiting Torsion assembly .187 wire size 29" spring length 90" shaft

  • This is a full balancer assembly
  • Twin springs one road one curb with a shaft through it
1104-16FT-CHI-CRM

Residential Side & Top PVC Weather-Strip with cap 16' Long - CHI Cream (C-C)

  • Cream rigid vinyl retainer with cream flexible vinyl seal.
  • Dual fin vinyl.
  • Comes with cap to hide screws.
  • CHI compatible colour
GALV-225-258-144-R

Torsion Spring .225 x 2-5/8" x 12ft RH Galvanized Orange/Green

  • Wire size: .225
  • Inside diameter: 2-5/8"
  • Length: 12 ft
  • Galvanized
GALV-363-334-144-L

Torsion Spring .363 x 3-3/4" x 12ft LH Galvanized Green/White

  • Wire size: .363
  • Inside diameter: 3-3/4"
  • Length: 12 ft
  • Galvanized Stenciled
GALV-262-258-L

Cut-to-Length Torsion Spring .262 x 2-5/8" Left Hand Wound Galvanized Red/Yellow Price per Inch

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-258-INSTALLED
K20-8100M-DC

LiftMaster Motor 1HP 90VDC 1PH

  • K20-8100M-DC is a 1HP Motor Replacement Kit (90VDC BM CF). For use with various LiftMaster® 1HP 1-Phase Commercial Door Operators and Gate Operator Systems
K79-13493A-300

LiftMaster FDOA Control Board LMPLC

  • Also known as: K29-FDOA-300
  • For use with various LiftMaster® Commercial Fire Door Operators
GAREX-PAINT-R12-WHTE

Garex Touch-Up Paint White for R12

OSH-6213-M-N1-RH

Manaras Opera-SH 3/4 HP 240V 1 Ph Monitored ECB w/N1 Photoeyes Right Hand

  • An ultra high-end heavy-duty V-belt drive industrial jackshaft operator
  • For use on Standard High and Vertical Lift sectional doors
  • Can also be used on Rolling doors and Grilles
  • Comes with a chain hoist for manual operation and a floor level engaging device
  • Clearence: side room required 16"
  • 25 cycles per day > 100 cycles per day
    • .......more details
Installation Manual
SC-25X15-78-W

Thermal Window 25" x 15" for 7/8" thick Steel Craft Door White

  • For 7/8" thick door
OSH-6534-M-N1-RH

Manaras Opera-SH 1 HP 600V 3 Ph Monitored Board w/N1 Eyes RH

  • An ultra high-end heavy-duty V-belt drive industrial jackshaft operator
  • For use on Standard High and Vertical Lift sectional doors
  • Can also be used on Rolling doors and Grilles
  • Comes with a chain hoist for manual operation and a floor level engaging device
  • Clearence: side room required 16"
  • 25 cycles per day > 100 cycles per day
    • .......more details
2807.177*270

Whiting Spring Assby .177 x 2-3/16 x 27" Curbside

  • Replacement torsion spring with cones
  • Specs: .177 x 2-3/16" x 27" Long
  • For Roadside order part # 2806.177.270
2376.162.18.770

Whiting Torsion assembly .162 wire size 18" spring length 77" shaft

111854.0005

Overhead Logic Board 575V 3Ph RSX/RHX

  • For RSX/RHX commercial ops. 575V
2376.177.25.930

Whiting Torsion assembly .177 wire size 25" spring length 93" shaft

2376.206.325.890

Whiting Torsion assembly .206 wire size 32-1/2" spring length 89" shaft

PRO-GH-5053-PANL

Micanan 1/2HP 575V 3P Gearhead Operator N Controls *** Price by Quote Only

  • Special Order by Quote only
O02R9201

AirLift Bottom Cap Complete w/Seals

K1D8059-1CC

LiftMaster Main Control Board with Heat Sink

  • This is a Pre-UL2016 Seven Segment Main Control Board with Heat Sink.
  • Compatible with LiftMaster® Models CSL24VDC CSW24VDC RSL12VDC and RSW12VDC Pad Mount Gate Operators.
  • Complete replacement kit includes: logic board adapter harness and installation hardware.
K75-36875-3

LiftMaster Gear Housing Kit GH 3PH L5

  • Compatible with Three Phase LiftMaster® GH Model Logic 5.0 Commercial Door Operators.
  • Complete kit includes: Housing Support Bracket Pads and Pressure Plate Housing with Cover Disconnect Kit Hand Chain Shaft Brake Kit and Installation Hardware.
2704.187_30

Whiting Roadside Torsion Spring.187 wire 2-3/16" ID 30" Long

  • Torsion spring wire only
  • .187 wire size
K20-3050M-5

LiftMaster Electric Motor 1/2 HP 575V 3Ph BM/CF

  • Also known as: K20-3050M5 20-3050M-5
  • For use with various LiftMaster® 3-Phase 575V Gate Operators and Perimeter Access Solutions
2376.192.34.930

Whiting Torsion assembly .192 wire size 34" spring length 93" shaft

  • This is a full balancer assembly
  • Twin springs one road one curb with a shaft through it
939C00010

Extension Spring Steel 1 pc Door 8x7 Hook End Special Order

  • For cantilever 1-pc door
EHJ-343-1

Doorlec Industrial Jackshaft Op. 1 HP 460V-3Ph

  • Heavy-Duty Industrial Operator for Sectional or Rolling Steel Doors
  • DC-2000 logic with adjustable Timer To Close Delay On Reverse and Traffic Light Control
  • Solenoid Brake prevents coasting and secures the door when closed
  • TEFC (sealed) continuous-duty electric motor with overload protection
  • Automatic Friction Clutch protects the door and operator
  • Self-aligning Heavy Duty sealed Pillow Block bearings on all shafts for high cycle applications
    • .......more details
O18R1003

AirLift Safety Eye Kit Telco

K77-38105

LiftMaster C-Clamp Kit SL595U Qty 2

  • Complete kit includes: (2) C clamps with mounting hardware
2806.200.340

Whiting .200 x 2-3/16 x 34" Roadside with Cones

2807.200.340

Whiting .200 x 2-3/16 x 34" Curbside with Cones

CP-SP-FLIP

Lynx Spring Release for GHO Operator

HW-KEY-SQ-316058

Lynx Straight Key 3/16" x 5/8" Long

610.9723

Whiting Panel Option for Long Pull Strap 32" L

  • This is an upgrade option when purchasing a door or bottom panel
510.1184.00

Whiting Hold Open Device 1184 Light Duty

  • Upgrade option when buying a truck door aka Positive Stop Assembly
  • This is installed onto the panel when the door is opened it is engaged and will keep the door open above the header so there is no hang down of the door.
  • The door will stay open above the header to eliminated the door being damaged.
K18-10931

LiftMaster Compression Spring

  • Also known as: 187009 G187009 1810931 18-10931 18-7009
K94-32309

LiftMaster J2 Harness Assembly SL585 SL595

115921-01

Wire Harness 66" long

  • Used on Rite-Hite dock leveler
2376.200.30.850

Whiting Torsion assembly .200 wire size 30" spring length 85" shaft

26CW945255

Truck Door Intermediate Panel (15.5" x 98") Painted White for Whiting Dryfreight

  • These panels are 15.50" height x 98" width.
  • Interlocking tongue and groove design for weather-tight joint and proper panel alignment.
  • 3/4" thick 7 ply exterior grade medium density plywood.
  • Painted white
K20-3075B-4P-H24

LiftMaster Electric Motor 3/4 HP 230/460V 3P L5

  • This is a replacement Motor Kit (3/4 HP 230/460V 3PH L5).
  • Compatible with various LiftMaster® Logic 5.0 Standard-Duty Belt Commercial Door Operators
510.2543.00

Whiting Narrow Mounting Angle for Posts Under 2-1/2" IN

  • This is an upcharge when ordering certain doors
ME113-C7

Miller Edge PVC Mounting Channel Flat Sold by the Foot

2806.187*300

Whiting .187 x 2-3/16 x 30" Roadside with Cones

2806.177*230

Whiting Spring Assby .177 x 2-3/16 x 23" Roadside

  • Replacement torsion spring with cones
  • Specs: .171 x 2-3/16" x 23" Long
  • Roadside
  • For Curbside order part # 2807.177*230
K77-16011

LiftMaster Hardware Kit for CPS N4

  • This is a replacement Sensor Hardware Kit only.
192417

Torque Force Pocket Guide 3.5" x 5" 195307

  • Imperial multiplier
  • Features: Drum specs Plugs specs Manual counterbalancing calculation Spring charts
CP-SH-34-12

Lynx Clutch/Drive Shaft Assembly No Pulley

  • For trolley operator
2704.135.140

Whiting Roadside Torsion Spring 2-3/16" ID 14" Long

  • Torsion spring wire only
  • .135 wire size
.192_2-3/16_60R

Spring Wire .192 x 2.188 x 60" CTD RAW RH

  • .192 x 2-3/16" x 12'
.25W8.2

Resistor 1/4 W 8.2K OHM

  • Dimensions (W X H X L) 6 X 15 X 3 CM
K75-13074

LiftMaster Straight and Curved Door Arm Kit APT

  • Compatible with LiftMaster® Model APT trolley Operator
41A5635A

LiftMaster Receiver Logic Board 390 MHz ** To extent of inventory

  • Compatible with a number of dual capacitor chain drive models including 2575 2585 2595 PD752 and PD758S manufactured between 2001 and 2005
  • Also known as: 41A5483-15 41A5635 01A5635A
K30-205-E

LiftMaster Boot Red

  • Also known as: 30-205-E 30205E
  • Replacement button cover for 02-406 station
2376.177*26.960

Whiting Torsion assembly .177 wire size 26" spring length 96" shaft

2376.192.29.910

Whiting Torsion assembly .192 wire size 29" spring length 91" shaft

  • This is a full balancer assembly
PRO-HHD-10053E-R

Micanan 1 HP 575V 3P Heavy-Duty Jackshaft NM ECB No Eyes Right Hand

  • 1 HP575V 3 PH Industrial Continuous Duty Jackshaft Operator Ideal for Sectional Doors Rolling Steel
  • Non-Monitored logic board with integral 372Mhz radio receiver that can hold up to 20 transmitters (MK-00647/ MK-00653/ MK-00659) or 200 of the 1 channel hand held transmitters (MK-00660).
  • 3-btn O/S/C (02-103) wall control station included
  • Adjustable Friction Clutch 5L320 drive belt
  • #50 Roller chain 18 tooth door sprocket included
  • Emergency chain hoist with electrical cut-off for manual operation
    • .......more details
Installation ManualSpecification Sheet
2705.148_180

Whiting Curbside Torsion Spring for Cube Truck Roll-Up Doors 18" Long

  • Most common torsion spring for cube trucks
  • Specs: .148 x 2-3/16" x 18" Long
  • For Roadside order part # 2704.148*180
2704.148_180

Whiting Roadside Torsion Spring for Cube Truck Roll-Up Doors 18" Long

  • Most common torsion spring for cube trucks
  • Specs: .148 x 2-3/16" x 18" Long
  • For Curbside order part # 2705.148*180
K74-30763

LiftMaster Plug-In Transformer 120VAC ****Discontinued Use APOW3

  • 120VAC 50-60Hz 36VDC 1.1A Output
  • Used on the LA400
  • Discontinued in 2018 use APOW3 instead
2806.171.200

Whiting Spring Assby .171 x 2-3/16 x 20" L Roadside

  • Replacement torsion spring with cones
  • Specs: .171 x 2-3/16" x 20" Long
  • Roadside
  • For Curbside order part # 2807.171.200
CP-SH-58-1038-HDC

Lynx Complete Limit Shaft Assembly for HDC

  • 5/8" x 10-3/8"
  • Same kit used for MCJH except the HCT has 1 extra nut
PRO-GH-7543U-L

Micanan 3/4HP 460V 3P Gearhead Operator N1 Eyes Monitored ECB Left Hand

  • Includes 3-btn O/C/S control station Nema 1
  • External radio control terminal strip
  • Heavy duty worm gear reduction in oil bath gearbox
  • Solenoid brake standard
  • #50 roller chain and sprockets on final drive
  • Emergency chain hoist with electrical cut-out switch for manual operation
    • .......more details
Installation manualSpecification sheet
K1D7078

LiftMaster EMI Board

  • This is a replacement EMI Board. Compatible with LiftMaster® Model HCT Overhead Gate Operators
.393-334-L-C

Cut-to-Length Torsion Spring .393 x 3-3/4" Left Hand Wound Coated ** Price by Quote Only

  • Priced per inch - cones & filler sold seperately
  • For factory installed cones use part no. C-375-INSTALLED
.243-2-R-C

Cut-to-Length Torsion Spring .243 x 2" Right Hand Wound Coated ** Price by Quote Only

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-200-INSTALLED
.218-134-L-C

Cut-to-Length Torsion Spring .218 x 1-3/4" Left Hand Wound Coated ** Price by Quote Only

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-134-INSTALLED
PRO-GH-7521U-R

Micanan 3/4HP 230V 1P Gearhead Operator N1 Eyes Monitored ECB Right Hand

  • Includes 3-btn O/C/S control station Nema 1
  • External radio control terminal strip
  • Heavy duty worm gear reduction in oil bath gearbox
  • Solenoid brake standard
  • #50 roller chain and sprockets on final drive
  • Emergency chain hoist with electrical cut-out switch for manual operation
    • .......more details
Installation manualSpecification sheet
PRO-GH-5081U-L

Micanan 1/2HP 208V 1P Gearhead Operator N1 Eyes Monitored ECB Left Hand

  • Includes 3-btn O/C/S control station Nema 1
  • External radio control terminal strip
  • Heavy duty worm gear reduction in oil bath gearbox
  • Solenoid brake standard
  • #50 roller chain and sprockets on final drive
  • Emergency chain hoist with electrical cut-out switch for manual operation
    • .......more details
Installation manualSpecification sheet
PRO-HHD-10043U-R

Micanan 1 HP 460V 3P Heavy-Duty Jackshaft N1 Eyes Monitored ECB Right Hand

  • 1 HP460V 3 PH Industrial Continuous Duty Jackshaft Operator Ideal for Sectional Doors Rolling Steel
  • Monitored logic board with integral 372Mhz radio receiver that can hold up to 20 transmitters (MK-00647/ MK-00653/ MK-00659) or 200 of the 1 channel hand held transmitters (MK-00660).
  • N-1 Through-beam (MK-00649) photocells included. Other options available.
  • 3-btn o/s/c (02-103) wall control station included
  • Adjustable Friction Clutch 5L320 drive belt
  • #50 Roller chain 18 tooth door sprocket included
    • .......more details
Installation ManualSpecification Sheet