Devanco Canada - Get The Right Garage Door Opener‎ and Parts

MIRF-T2

Miller Edge Patriot 2 Photo Eye Non-Monitored 30ft Non-Contact

Attaches directly to a Sectional door.
The photo eyes travel below the door during the closing cycle.
Unlike traditional static mount photo eyes; Patriot travels with the door sensing obstructions prior to contact.
The Patriot2 non-contact system consists of thru beam photo optics.
Emitting and receiving eyes mount into a rigid steel spring loaded retracting housing.
The housings attach to the bottom section of the door and extend below the leading edge of the door providing an invisible infrared light beam of protection.

.......more details

K77-16011

LiftMaster Hardware Kit for CPS N4

This is a replacement Sensor Hardware Kit only.

IRB-SH-SET

EMX Industries Steel Protective Hoods Only Grey Powder Coat Pair

Includes 2 hoods
Powder-coated steel construction
Compatible with EMX IRB-MON EMX IRB-4X safety photo beam sensors
Each hood fits easily over gate/garage door opener sensor

CA-151-412

Continuous Angle 1-1/2" x 4-1/2" x 151.5" L Sold per Piece

12-ga angle

LMHNTG

LiftMaster Rearview Parking Access Hang Tag 25/pkg Random Coded

Rearview mirror hanger gives access to gated facilities complexes for cars trucks and other vehicles
Can be used for larger vehicles with higher cabs as vans various trucks
20-25 foot detection zone
Device is engineered for use with the LIftMaster LMSC1000 Long Range Vehicle Access-Card Reader
Simple transferrable item can be swapped out for rental cars different vans/trucks in a fleet dealer/loaner repair cars and more
Tags are sold in batches of 25. Your location may have a facility code. Check with your maintenance department or administrator if needed

.......more details

Installation manual Manuel d'installation Sell sheet Brochure

LMUNTG

LiftMaster Glass Mount Parking Pass Tag Sold Per Card

A security-enhanced RFID passive transmitter for use with the LIftMaster LMSC1000 Long Range Vehicle Access-Card Reader.
Glass-mount means it can be affixed to either the windshield of a car or to the headlight housing of the vehicle
Aligns with the cone-shaped detection zone from LiftMaster RFID Reader and activates it to open gate barrier
Added security of single mount use: shuts off if removed after adhering to a surface
Use on trucks or other high-clearance larger vehicles; 20-25 ft detection range from reader
Tags are sold in batches of 50. Your location may have a facility code. Check with your maintenance department or administrator if needed

.......more details

Installation manual Manuel d'installation Sell sheet Brochure

2376.206.30.870

Whiting Torsion assembly .206 wire size 30" spring length 87" shaft

LMSC1000

LiftMaster RFID Long Range Vehicle Access Card Reader

Easy wall or post mount vehicle tag/prox card reader can service an entire facility parking garage gated community/HOA or guarded properties.
Integrates into (CAPXL CAP2D) Liftmaster PPWR Passport Receiver and LiftMaster CSW24U 24 VDC Commercial Swing Gate Operator CSL24UL HCTDCUL systems to give access via encrypted-digital code.
Opens swing or slides gates from 20-30 feet distance
26-bit Wiegand Interface console
Encrypted binary protocol signal
Helpful Programming/Testing/Function tri-color LEDs on both reader face and Wiegand console

.......more details

Installation manual Manuel d'installation Sell sheet Brochure Wiring the LMSC1000 to KPR2000 Raccordement éléctrique du LMSC1000 au KPR2000

ME00006

Micanan Intermediary Shaft 1" x 10-7/16" c/w KW

BEARING051

Manaras Flange 2-Bolt Flange Bearing ID 5/8" Black

2 set screw holes 1/4-28 at 90 degree NO Set Screws provided
The original set screws are to be re-used

A22KITB

Erone Web-Based IP 2-Door NANO Kit

Atrium 2-Door Controller Kit Web Based IP Hybrid
Module Embedded Web Server Includes 2 NANOPB (black mini proximity readers) 15 Credential Software
Convert any A22 door controller to an A22EC elevator controller by simply updating the firmware for free (up to 256 floors)
On-board Ethernet Port with AES 256-bit encryption
Auto-detect hardware modules Quick and easy card enrollment procedure
Lock outputs: 2 (750mA @ 12VDC/each) Relay Outputs: 2 Form C relays

.......more details

Installation Manual Sell Sheet Wireless System Chart

41D9044

LiftMaster Battery/ Logic Board Cover RJO

Compatible with 8500 and 8500W

31111

Doorlec Sprocket 50B70 2" Bore KW/SS 1/2T

192417

Torque Force Pocket Guide 3.5" x 5" 195307

Imperial multiplier
Features: Drum specs Plugs specs Manual counterbalancing calculation Spring charts

HD8460-KYD-ALIKE

T-Handle Cable Lock System 1-3/8"- 2" ** Keyed Alike **

Complete cable locking system for a 1-3/8" or 2" door Keyed alike
System includes: Auto Latch Striker Keeper T-Handle keyed with 4-1/4" shaft Inside release handle 3/32" cable and all required hardware.
Also works for for 1-3/4" doors
T handle KA5 = keyed alike increment of 100 (5 different combination box (20 of each #)

CP-LX-KEYPAD

Lynx Wireless Commercial Op. Keyless Entry 372MHz

Illuminated Keypad
Weather shutter protects keypad from elements
Wireless Installation
4 digit codes for maximum security
Allows for access without remote or keys
For use with any UL325 commercial operator that has an LX100 or LX900 board

.......more details

Programming instructions

PUSH148

Manaras Contact Block NO

Same as ZEN-L 1111

8550WLB-485

LiftMaster Belt Drive DC Battery Backup Operator Wi-Fi

12V DC motor with integrated battery Backup
Includes battery 485LM
2-100W lights
Electronic Travel Setting and Auto Force
Built in Alert 2 Close
Incl. Smart Control Panel model 880LM 3-btn remote (893MAX)

.......more details

Installation manual Manuel d'installation Sell sheet Brochure Receiver Logic Board Conversion List

N4GH503L5-RH

LiftMaster Gearhead wi/Watertight/Oiltight Mod. and Brake 1/2 HP 230/460V 3-Phase Logic 5

N4 (M103) modification installed on operator Watertight Oiltight Dust-tight with Nickel-plated chain and Dynamic brake.
Comes with CPS-UN4 photo eyes

CABLE-NR-14-GALV

Cable No Roll 1/4" 19x7 Galvanized 500ft

19X7 rotation-resistant wire rope.

CP-SH-34-12

Lynx Clutch/Drive Shaft Assembly No Pulley

For trolley operator

K107A0031

LiftMaster Replacement Keys (2) for KPW5 KPW250

Replacement keys only

HA-3001

Hose Anchor for Treadle Hose

Made of cast iron

CGH503L5-RH

LiftMaster Gearhead with Brake & Carwash Mod 1/2HP 208/230/460V 3P L5 Right Hand

Gearhead style commercial door operators employ lubricated gears for heavy industrial high cycle applications.
GH-style operators include a floor level chain hoist to ease manual operation in an emergency or power outage.
Hoist wheel is easily moved to Right or Left hand side of unit eliminating the need to order right or left hand mounting.
MyQ Technology enables you to securely monitor and control your facility operator with your smartphone tablet or computer. Internet Gateway 828LM required.
Security +2.0 radio receiver safeguards your facility - with every click a new code is sent to the commercial door operator so the door opens only for you.
Timer-To-Close: Conveniently and confidently closes the commercial door automatically after a predetermined amount of time has elapsed for added security and peace of mind.

.......more details

106141

Marantec Shaft Adapter

2704.135.140

Whiting Roadside Torsion Spring 2-3/16" ID 14" Long

Torsion spring wire only
.135 wire size

10RD900

BEA Receiver Module 900 MHz

Long range receiver to allow for wireless activation of any door control.
Provides greater line of sight transmission distance than legacy wireless frequencies along with providing better penetration of obstacles.
Voltage: 12 – 24 VAC / VDC
Operating temperature: -10 to 55C

Product guide

10TD900INDHH3

BEA 3-Button Digital Transmitter Nema 4 900 MHz

Compact transmitter allowing wireless activation of any door control providing greater line-of-sight distance than legacy wireless frequencies.
It also provides better penetration of obstacles.
IP65
Operating temperature: -10 to 55C
Controls one 10RD900 receiver

Product guide

E/1929/022

Automatic Systems Round Arm Ass'y 10' (BL229)

Used on the BL229 gate op.

1013-1-1/4-18'

Rigid Vinyl Bottom Retainer L-Shaped 18' Long

For door thickness: 1-1/4"

541.3224.00

Whiting Outside Cam Lock w/Inside Release

An upcharge when ordering a Whiting door #3224 #77 & #7535.2-TG

41D541

LiftMaster Battery Cover for 877MAX Beige

Replacement battery cover only
Also known as 041D0541 41C541 41D541

MV00482

Micanan Banner Intrinsically Safe Reflective Photocell Kit w/Bracket & Reflector (0-25ft. Range)

Kit icludes the bracket (MV280) and reflector (MV279)
Model Q45AD9LV
Range: 9 m; Input: 5-15V dc
Output: NAMUR
2 m (6.5 ft) cable
Nema rating: NEMA 6P

.......more details

41ASWG-489

LiftMaster Cable Repl. Kit 24V 3m with Connector

For use with LiftMaster® Model LA400 Series Commercial Swing Gate Operators

CGH103L5-RH

LiftMaster Gearhead w/ Brake and Carwash Mod. 1 HP 208/230/460V 3-Phase Logic 5 Right Hand

Requires 828LM MyQ Internet Gateway to connect to MyQ Smartphone App.
Security+ 2.0®
Includes CPS-UN4

CGH103L5-LH

LiftMaster Gearhead w/ Brake and Carwash Mod. 1 HP 208/230/460V 3-Phase Logic 5 Left Hand

Requires 828LM MyQ Internet Gateway to connect to MyQ Smartphone App.
Security+ 2.0®
Includes CPS-UN4

.289_3-3/4"-RH

Torsion Spring .289 x 3-3/4" x 12ft RH

Wire size: .289
Inside diameter: 3-3/4"
Length: 12 ft

K75-19978-L

LiftMaster Frame Plate Kit Left Hand Disconnect

For use with various LiftMaster® Hoist and Jackshaft Commercial Door Operators

M-0131

Autogate Proximity (Limit) Switch

M-0133

Autogate Proximity Magnets

LVB420-11SF/P1

Steel-Faced Laminated Bumper Black 4" Projection Vertical Installation 20" x 11" Sold Individually Style P1

Used on docks where excessive friction from up and down trailer movement occurs (yard jockeys air ride trailers etc.).
Can be used in material handling application where medium to heavy dock protection is required.
5/8" anchor bolts mounted through pre-drilled holes into dock or can be welded to curb angle.
Steel face is 3/8" thick heavy duty high carbon steel that is mounted over a laminated dock bumper.
Plate to be welded to 2 or 3 steel support brackets which are to extend back to the 3/4" supporting rods.
Brackets to be punched with elongated holes to allow steel face to "float" upon impact.

.......more details

.192_2-3/16_60R

Spring Wire .192 x 2.188 x 60" CTD RAW RH

.192 x 2-3/16" x 12'

.192_2-3/16_60L

Truck Door .192 x 2.188 x 60 CTD RAW LHW

.192 x 2-3/16 x 12'

MF-341-011

Serco Manual Brake Band

For use with Serco brand dock levelers

15-41B10G1

Sprocket 41B10T 3/4" Bore

Also known as: 15-41B10GXX 15-41B10G1 155010

20650

Coax Cable Extension Adapter

Adapter with “F” socket
Connects two coax cables to extend length

HSC-BOLT-3002

Replacement Center Bolt for HSC-600 Swager Sold Individually

Replacement bolt only (1)

PRO-HHD-7525U-R

Micanan 3/4HP 220V 1P Heavy-Duty Jackshaft N1 Eyes Monitored ECB Right Hand

3/4 HP208V 3PH Industrial Continuous Duty Jackshaft Operator Ideal for Sectional Doors Rolling Steel
Monitored logic board with integral 372Mhz radio receiver that can hold up to 20 transmitters (MK-00647/ MK-00653/ MK-00659) or 200 of the 1 channel hand held transmitters (MK-00660).
N-1 Through-beam (MK-00649) photocells included. Other options available.
3-btn O/S/C (02-103) wall control station included
Adjustable Friction Clutch 5L320 drive belt
#50 Roller chain 18 tooth door sprocket included

.......more details

Installation Manual (EN)Specification Sheet

02-406-2

LiftMaster Key Set Qty 2

Replacement Key ONLY for 02-406 2006-2015 #1 or #1502M

02-406-3

LiftMaster Key Set Qty 2

Replacement Key ONLY for 02-406 station
Keys for 02-406 2015 To Present #301 x 2

.25W8.2

Resistor 1/4 W 8.2K OHM

Dimensions (W X H X L) 6 X 15 X 3 CM

41D0216-2

LiftMaster End Panel with Light Socket

Compatible with LiftMaster® 8550WL & 8360WL Models; and various garage door openers manufactured after 2017 only
Circuit board not included

MOTOR255

Manaras Electric Motor 3/4HP 120/240V 1PH

CHW401-114-TFRCE

Chain Hoist Wall Mount 4:1 1-1/4" 2000R Torque Force (126658)

4:1 Reduced drive
Sprocket: 41B36x114 Bore: 1-1/4"
Includes: 26ft of hand chain 1/4" square key chain keeper and 3.6ft of #41 roller chain included with sprocket wheels.
Cross Reference: 2000R OMI 4006

Drawing Sell sheet

MG00007

Micanan Hex Nylon Lock Nut 6-32UNC

210337

Skylink Turnbuckle Kit

Fits Skylink & select Mastercraft openers

K75-13074

LiftMaster Straight and Curved Door Arm Kit APT

Compatible with LiftMaster® Model APT trolley Operator

MI00018

Micanan Motor Pulley LD 4L 1.5" x 5/8" ID

Used on the motor shaft for a 4L v-belt.

C-24X10-134-W

Thermal Window 24" x 10" for 1-3/4" Door White

For 1-3/4" thick door

85503-267

LiftMaster Belt Drive DC Battery Backup Wi-Fi W/Camera w/extra remote (893MAX) and keypad (877MAX)

Integrated Camera. Camera manually adjust 360 degrees to see everything that happens in the garage
HD-Quality Video. Glare-resistant night vision lens auto-adjusts to light levels in the garage to capture everything and anything that passes through the garage
Live Streaming and Video Storage. View a live-stream of your garage for free. 7-day and 30-day video storage options are available via a monthly subscription.
2-Way Audio. Communicate in real time between your garage and your smartphone
MyQ Technology now with Wi-Fi® enables secure monitoring and control of your garage door opener with a smartphone tablet or laptop.
DC Motor Belt System delivers powerful ultra-quiet performance.

.......more details

Installation manual Manuel d'installation Sell sheet Receiver Logic Board Conversion List

MOTOR359

Manaras Electric Motor 1 HP 208/480V 3Ph

Continuous duty C-flange ODP 60Hz

CA-104-312

Continuous Angle 1-1/2" x 3-1/2" x 104" L Sold per Piece *** NLA

12-ga angle

PMT20I

Carlo Gavazzi Through Beam Emitter Side Only

PMT series features include immune to ambient light precise detection through narrow beam LED-indication and output function switch selectable.

Installation Manual

6X30PO50

Devanco Loop 6' x 30' pave-over 50' lead-in

Ideal for use on with gravel driveways or sufaces that are to be asphalted
Features a twisted lead-in to reduce the chances of interference and false detections.
Direct burial loops should be buried approximately 6" deep

K75-19978-R

LiftMaster Frame Plate Kit Right Hand Disconnect

For use with various LiftMaster® Hoist and Jackshaft Commercial Door Operators

P-0128/LH

Autogate Retro Bracket Left Handed System

This is needed to change over to their current motor

422LMC

LiftMaster 2-Channel Co-Axial Receiver 390 MHz ***DISCONTINUED

Smart Garage Door Opener® electronics on each channel for fast programming
Bell wire attached for easy second channel hook-up
18 - 35VAC/DC
FCC certified 390MHz

MSC330V72-BULK

Motor Start Capacitor 330V 72-86MF

IS40-XL

BEA Industrial Sensor Low Mount Dual Technology Presence Detection BEA-10IS40XL

Dual technology sensor combining presence and motion detection in industrial applications.
Bidirectional unidirectional approach and unidirectional depart microwave detection options. Six modes of detection filtering and 9 uniqueinfrared patterns for highliy flexible presence detection.
Up to 7 minimum object targets
Adjustable infrared immunity modes to mitigate environmental disturbances (vibrations light and sun)
Mounting height: 6.5ft - 11.5ft
NEMA 4

.......more details

Installation manual Sell sheet Cut sheet

26117

Doorlec Limit Cam Retainer Plate

Fits Most Doorlec Commercial operators except Explosion-Proof Operators
Will not fit on waterproof operators with small electrical enclosure built before 1999

21001

Limit Switch Micro

CP-MO-34-123/1

Lynx Electric Motor 3/4 HP 115/230V 1 Ph

Electric motor only

MG020-B-4E-P/FT

Miller Edge Sensing Edge Black 4-Wire Monitored End Outlet Sold per Foot

Electromechanical slide in edge with a small profile for motorized gates and doors rolling shutters and pinch point protection applications.
Touch sensitive signaling
Temperature range: -30F to 155F
Lead wire: 18 gauge 2ft length
Sensitivity: nominal 4 PSI
2 wire NO configuration

.......more details

RADIO-RE901B

Manaras Open/Stop/Close 24V receiver Nema 4/12 313 MHz

Wall mount
Fixed code / Dip switch technology
Commercial reciever( Learn button) 1-door
16 Fixed codes / Receiver
Nema 4/12
Approx 100' range

.......more details

HSLG-123

Linear Commercial Slide Gate Operator 1 HP 230V 3 Ph - Heater not Included

Max duty cycle: Continuous
Integral APeX Controller
Double V-belt to chain reduction
#40 roller chain
Emergency manual disconnect handle
Powder coat finish

.......more details

LM56A

LiftMaster Magnetic Proximity Reed Switch

Normally Open magnetic sealed reed switch; proximity switch
Used for overhead door contacts.

PL-A21-RPM-WHEEL

Lynx RPM Reader Wheel

PL-A23-RPM-BRKT

Lynx RPM Reader Board Bracket Only

K77-19130

LiftMaster Hardware Kit LA400 LA412

MGR20-Y-2U-PER-FT

Miller Edge Sensing Edge Round Yellow 2-Wire Universal Outlet Sold Per Foot

��Electromechanical edge for standard 2" round or square frame sliding sing and bi-part gates. •3-sided activation allows for immediate stopping or reversing of motion •Contours to round or square posts. •Temperature range: -30F to 155F •Lead wire: 18 gauge 2ft length •Sensitivity: nominal 6-8 PSI •2 wrie NO configuration •ANSI/UL325 recognized component •Cannot be bent •One year warranty
Non-monitored edge
Maximum length is 10ft (over 8ft requires LTL shipment at additional cost)

CHAIN059

Manaras #41 chain 48 Pitch (24" long)

Includes 1 chain link

41D4509

LiftMaster Motor Kit ATS211

Also known as: K75-16424 41D4509 123D0155 123D155

3709-4220

Strap 2" w/Ratchet & Double J-Hooks 20ft Long

Polyester strap 2" wide
Work load limit 3335 LBS

ETB-321-1/2HP

Doorlec 1/2HP 230V 1PH Trolley Door Opener

Trolley model heavy-duty door operator designed to provide smooth dependable operation of sectional overhead type doors.

MA034RDOT

LiftMaster Articulating Square PVC Arm Kit Red/White with Retro-Reflective DOT Tape 9 ft

For use on Mega-Arm gate operator
Red White reflective DOT stripe
9 ft. x 2.5 in. square includes hardware kit (MA033)

Additional arm accessories

MD-00338

Sprocket 40B15 1" Bore 1/4" KW 2SS

15 tooth sprocket for #40 chain

K75-36260

LiftMaster Lock and Keys

For various Liftmaster commercial slide and swing gate operators.

K23-34815-1

LiftMaster Stop / Reset Switch Black Face

For use with SL595UL Series heavy-duty industrial slide gate ops

K77-37853

LiftMaster Cover Assembly with Lock & Keys CSW24U

This is a made to order replacement part. Please allow extended lead time due to manufacturing and shipping for all made to order LiftMaster® parts

60-6560-C-YELLOW

Speed Bump Yellow 36" Econo Light Weight for Concrete *** NLA

A standard speed bump system section includes (2) main pieces (2) endcaps x 5” long and (1) connector clip.
Main pieces may be added and connected to form larger units.
36” long x 10.5” wide x 2” high (main piece)
EndCap: 5” Safety Snap On End Cap - sloped modular profile prevents tripping by pedestrians.
Yellow Plates: Each speed bump section is embedded with (6) yellow safety plates of weather resistant composite material for protection from salt freeze and thaw.
Can be used as a cable cover - bottom sides include 1” x 1½” channels for protecting temporary or permanent cables or hoses.

.......more details

60-6550-A-BLK

Speed Bump Black 36" Econo Light Weight for Asphalt *** NLA

A standard speed bump system section includes (2) main pieces (2) endcaps x 5” long and (1) connector clip.
Main pieces may be added and connected to form larger units.
36” long x 10.5” wide x 2” high (main piece)
EndCap: 5” Safety Snap On End Cap - sloped modular profile prevents tripping by pedestrians.
Yellow Plates: Each speed bump section is embedded with (6) yellow safety plates of weather resistant composite material for protection from salt freeze and thaw.
Can be used as a cable cover - bottom sides include 1” x 1½” channels for protecting temporary or permanent cables or hoses.

.......more details

60-6550-C-BLK

Speed Bump Black 36" Econo Light Weight for Concrete ***NLA

A standard speed bump system section includes (2) main pieces (2) endcaps x 5” long and (1) connector clip.
Main pieces may be added and connected to form larger units.
36” long x 10.5” wide x 2” high (main piece)
EndCap: 5” Safety Snap On End Cap - sloped modular profile prevents tripping by pedestrians.
Yellow Plates: Each speed bump section is embedded with (6) yellow safety plates of weather resistant composite material for protection from salt freeze and thaw.
Can be used as a cable cover - bottom sides include 1” x 1½” channels for protecting temporary or permanent cables or hoses.

.......more details

103-T-8X10-VL

Hardware Set 3" Industrial 103-T for 8' x 10' VL

A variety of options and sizes are available call for quote
Set includes tracks HD rollers hinges solid shaft drums cables springs and struts if applicable.