Devanco Canada - Get The Right Garage Door Opener‎ and Parts

MCT-3

Linear 3-btn MegaCode Transmitter 318 MHz ** Use MTS3

Activates three 318 MHz MegaCode receivers
Test/operate LED
Visor mounting clip supplied
Two CR2032 batteries included
Codes: 1000000+ (MegaCode format)
Dimensions: 3" W x 1.875" H x .625" D

.......more details

Programming Instructions

DT

Linear 1-btn Delta3 Transmitter 310 MHz (DNT00002A)

Activates one Delta-3 receiver
Test/operate LED
Visor mounting clip supplied
Power: 9-volt battery
Codes: 256 (set by 8 dip switches)
RF frequency: 310 MHz

.......more details

Programming Instructions

HAE00014

Linear Pulley and Bracket - Chain (HCT)

HAE00004

Linear Limit Switch Assembly

For LSO LDO LCO

1336.5

Whiting Stainless Steel Curbside Top Closure Bracket for 10" radius

7953

Whiting Truck Door Hinge Gasket White

1209.1

Whiting Stainless Steel Truck Door Side Hinge with Roller Cover

1016-ADHESIVE

Adhesive for Storm Shield 6oz tube

For use with 1016

Safety data sheet

1015-1-3/4-12'

Rigid Vinyl Bottom Retainer Raised Centre 12' Long

Black - for door thickness of 1-3/4"

1006-1-3/8-16'

Rigid Vinyl Bottom Retainer U-Shaped 16' Long

Black with flexible fin to touch door face.
For door thickness 1-3/8"

1006-1-1/2-16'

Rigid Vinyl Bottom Retainer U-Shaped 16' Long

Black with flexible fin to touch door face.
For door thickness 1-1/2"

1005-1-1/2-16'

Aluminum Bottom Retainer U-Shaped 16' Long

For door thickness 1-1/2"

1003-1-5/8-10'

Aluminum Bottom Retainer L-Shaped

For 1-5/8" thick doors.

1104-16FT-WHITE

Residential Side & Top PVC Weather-Strip with cap 16' Long - White (W)

White rigid retainer with white flexible vinyl.
Dual fin vinyl.
Comes with cap to hide screws.

PULL-CHAIN

Pull Chain Spring Only 12" Long

Spring Only for pull chain device
Used with a hand chain for full vertical doors.
Eliminates the need for leaf bumpers

25-42-150

Extension Spring 7' Door - 150 lbs Red

Double - Loop
25" long 42" stretch 150 lb load
Sold individually
Rated for 10000 cycles

Spec Sheet

25-42-120

Extension Spring 7' Door - 120 lbs Green

Double - Loop
25" long 42" stretch 120 lb load
Sold individually
Rated for 10000 cycles

Spec Sheet

93-00240

Truck Door Spacer Washer for Rollers

Used with Rollers to help adjust Roll up doors
Cross Reference: T #80020 W #6 #66 140100

28-32071

Truck Door 2" Horizontal Track with 8" Radius 107" Roadside (LH) for Whiting Roll-Up Doors

SPECS: Length: 107" Fits door sizes: Up to 96" high
Cross Reference: W #11-3
Galvanized steel 14 gauge construction
Tongue and groove for proper alignment at joints
8" radius
For use with 2" diameter steel or nylon rollers

.......more details

26-40027

Truck Door Bottom Seal 98" Long for Whiting Dryfreight Doors

Flexible PVC material
Cross Reference: W #1676

25E10270

Truck Door Shaft Cover for Bottom Roller Black E-coat finish for Whiting Roll-Up Doors

Steel construction Black E-coat finish
Attaches to bottom panel for roller support
Shaft cover for 1 stud
Cross Reference: W #1021

Z9997

Hand Chain 25' for Manual Chain Hoists

Not SAE rated.
Designed for approx. 35 lbs

HD8460-138

T-Handle Cable Lock System 1-3/8" ***Use HD8460-200 instead***

Complete cable locking system for 1-3/8" door.
System Includes: Auto Latch Striker Keeper T-Handle keyed with 4" shaft Inside Release Handle 3/32" cable and all required hardware.

DM32-125

Cable Drum Standard Lift 32' 800-32 (1-1/4") Pair Torque Force

32 ft Standard lift aluminum die cast alloy cable drums for 1-1/4" shaft.
Pair includes (1) LH & (1) RH. Color coded: Red=LH and Black=RH.
3/8"-16 x 2" hardened cup point set screws installed with red heads.
Maximum Door Height: 32'-1".
Rated Lift per Drum: 1000 lbs.
Max Cable Diameter: 1/4".

.......more details

R5201

Cast Iron Pulley 3"

Bored for 3/8" diameter bolt
Cable diameter: 1/8"
Cast iron pulley mounted on two pressed sealed bearings.
Radial Load: 400lb

BK050/PR

Residential Bottom Bracket Low Headroom BB-5 LHR Sold as a Pair (L & R)

Minimum door thickness 13/16"
Gauge: .109 Height: 6-7/16"
A pair includes one left hand and one right hand bracket.

25-10200

Truck Door Top Bracket Assembly for Todco Roll-Up Doors

Steel construction Zinc plated
Heavy-duty design
Assembly includes: Base Slide Bolt & Washer
Cross Reference: T #69433 W #4039

25-10050

Truck Door Center Hinge Zinc for Todco Roll-Up Doors

Zinc plated Steel construction
Cross Reference: T #61196 T #59126 W #4012 220100

9150000701

Safety Cable for Extension Spring 3/32" 7x7 10' Sold as a Pair

Looped on one end the other is raw (no stops)
Used to wrap around the body of an extension spring to contain the wire should the spring break.

32-48-300

Extension Spring 8' Door - 300 lbs Tan ** Replaced by 27-48-300

Double - Loop
32" long 48" stretch 300 lb load
Springs sold individually

Spec Sheet

VWS-34-CHRY-OAK

Screw Colored for Vinyl Weatherstrip #8 x 3/4" 1000/Box Cherry Oak

Pan head

MC824H/V1

Big Metro MoonClever Control Box 110VAC

PRO-T-7543-U

Micanan 3/4HP 460V 3P Trolley Operator N1 Eyes Monitored ECB

Designed for use on commercial / industrial sectional overhead doors with standard lift tracks.
#41 roller chain on 3/4 HP models
Monitored board

AVP-1

Ace Type Keyswitch with Aluminum Mounting Plate

Zinc Alloy Die Casted housing and Cylindrical Chrome Plated
Tubular key with 2 keys
60 Combinations Available
Spring Return Type
Recommended for multiple dwellings
Contact ratings: 4 A 125V AC 2A 250V AC

.......more details

CSL24UL

LiftMaster New 24VDC Commercial High Traffic DC Slide Gate Operator

Battery Backup: 208 cycles or up to 24 days of standby power when the power is down
Security+2.0®: Access your property quickly with Security+2.0® Technology that utilizes a tri-band signal that virtually eliminates interference and offers extended range each time the remote control is used
MyQ®: Securely control and monitor your Gate Operator from anywhere and get activity notifications through the MyQ® app
Soft start / stop extends operator and hardware life in high-cycle and heavy-gate applications
Wireless dual-gate communication eliminates expensive conduit costs and unsightly driveway scars
Keyed manual disconnect when unlocked allows gate to be operated manually.

.......more details

Installation manual Manuel d'installation Sell sheet

1209

Whiting Roller Hinge Complete

AAA

Battery AAA Alkaline Duracell Procell Sold Individually

Sold Individually

1336.2

Whiting Roadside Top panel Closure Bracket 10" Raduis

PHOTO-075

Manaras Non-Mon. Retro-Refl. Photo Cells Exterior 24V IP67 0.5-32' Range.

Non-Monitored reflective Photoelectric manufactured by Sick

Manual

25E10050

Truck Door Center Hinge Black E-coat finish for Todco Roll-Up Doors

Steel construction Black E-coat finish

41A4885-2

LiftMaster MVIS Pulley & Worm Gear Assembly

Gear and sprocket assembly for belt drive models between 1995-2002

Installation Manual Manuel d'Installation

MA021

LiftMaster Nylon Arm Nuts 50/Pkg

For barrier gate models MADCBB MATDCBB MASDCBB & MASTDCBB

CABLE-NR-316-SS

Cable No Roll 3/16" 19x7 Stainless Steel 500ft

19X7 SS 3/16” Rotation-Resistant Wire Rope was conceived for overhead cranes but manufactured specifically for high-performance garage doors.
A spin-resistant construction coupled with the corrosion-resistance of stainless steel is the perfect mix of resilience and performance for high-traffic areas.

OGH-6433-ECB

Manaras 3/4 HP 480V 3Ph Gear Head Operator with Elect. Circuit Board

A heavy-duty worm gear industrial operator designed for use on industrial standard high and vertical lift sectional doors or rolling doors and grills.
Includes a self-engaging chain hoist for manual operation
25 cycles per hour 80 cycles a day
Hoist on right side standard can easily be moved to the left in field
Full overload protection
BRACKET112 must be used for wall mounting

.......more details

Installation Manual Sell Sheet

75424

Marantec Universal Receiver / Remote Kit 315 MHz

Universal receiver kit includes one plug-in radio receiver and one M3-2312 remote control transmitter
Universal receiver plugs directly into the wall outlet
Same as part # 73870
Made in Germany

Installation Instructions Programming Instructions

RCB-2560

Roller Chain Break #25 thru #60

Replacement tip included.

O042010

AirLift Bracket Horizontal 90 Degree Lift Bar

10-1036-4

Whiting 2" Nylon Roller 5" Stainless Steel Shaft for Truck Doors

A Whiting original part
Stainless steel bearings stainless steel shaft

JRGX1

Chain Hoist Jack Shaft JRG V2 1" Shaft Torque Force (126689)

Jack Shaft Mounting plastic guide 4.5:1 reduction
Gear drive
Fits 3-3/8" minimum offset
Includes: 26' of galvanized hand chain - doors higher than 15' require additional hand chain
1 chain keeper
2 shaft collars

.......more details

Sell sheet

GRC390/315-3

Heddolf Genie Compatible 390 or 315 MHz 3-btn Transmitter

390 or 315 MHz rolling code compatible 3-Button 3-Channel remote transmitter
Works with Genie and Overhead Door openers that utilize a ROLLING CODE 315 or 390 MHz
Compatible with Genie model GIC-3 GIT90-3 GIT-3 GIT-3BL G2T-3 G2T-3BL GICT390-3BL ACSGT ACSCTG Type 1 ACSGT Type 1 TBSTG Type 1 Series II Electronics Compatible Remote and B8QACSC

0824-2-WHITE

Elton Commercial Window 2" thick Door 0824 White Frame Sealed Glass

Screw together window kit
Thermal window
Frame size: 23 15/16" x 7 15/16"
Cut-out size: 23-1/8" x 7-1/8""
Vision area: 21-9/16" x 5-1/5"
Different glass options and frame colours are available upon request

.......more details

050DCRJB3MC

LiftMaster Receiver Logic Board DC. WiFi HD RJO

Security+ 2.0 Receiver Logic Board Replacement Kit
For use with the LiftMaster® 98032 Heavy Duty Residential Jackshaft DC Wi-Fi® Garage Door Operator; powered by myQ® and manufactured 2024 to present
The unit will feature a yellow circle learn button

6X26PO50

Devanco Loop 6' x 26' pave-over 50' lead-in

Ideal for use on with gravel driveways or surfaces that are to be asphalted
Features a twisted lead-in to reduce the chances of interference and false detections.
Direct burial loops should be buried approximately 6" deep

OGH-6114-M-N1-RH

Manaras 1 HP 120V 1Ph Gear Head Operator with Monitored ECB N1 Eyes Right Hand

A heavy-duty worm gear industrial operator designed for use on industrial standard high and vertical lift sectional doors or rolling doors and grills.
Includes a self-engaging chain hoist for manual operation
25 cycles per hour 80 cycles a day
Hoist on right side standard can easily be moved to the left in field
Full overload protection
BRACKET112 must be used for wall mounting

.......more details

210264

Skylink Case Cover Atoms

SW-500-ADAPTER

Devanco Industrial Spring Winder 500 for 3.75" - 6" Adapter for Richard Wilcox Torsion Spring Plugs

Adapter for SW-500 to be used with Richard Wilcox spring plugs
This adapter is 5 mm higher than the universal model

JHDC7S1BE

LiftMaster MAXUM Jackshaft 1/2HP 120/240V 1PH DC Operator 30 Cycles/Hour 700LB long output shaft

New DC high-efficiency motor and gearbox provides the power needed and smooth start and stop to reduce wear-and-tear on your door and operator
Average of 12” per second opening on sectional doors and 8-9” per second on rolling steel doors
Provides seamless operation by supplying standby power when the power is down (battery backup kit sold separately)
Listed to ANSI/CAN/UL325 Standard for USA/Canada
Drive Type 65:1 Gearbox with #50 Chain Output
Radio Receiver DC Logic 1.0 board with Security+ 2.0® rolling code technology remote controls and binary DIP switch remote controls

.......more details

TDC22X1BMC

LiftMaster MAXUM Trolley DC Comm. Op 3/4HP Equivalent 120/240V 1PH 60 Cycles/Hr 2200LB

Smooth Start/Stop Operation - DC high-efficiency motor and gearbox provides the power needed and smooth start and stop to reduce wear-and-tear on your door and operator.
Faster Speed - Average of 12” per second opening on sectional doors.
Battery Backup Option - (battery backup kit sold separately).
Floor-Level Wall Controller - 4-line LCD display gives you access to programming troubleshooting and diagnostics at floor level saving time and money.
Wi-Fi® and myQ® - Easily connect to myQ Facility via Wi-Fi for visibility into what is happening at your door and control it from your web browser; no need for additional hubs or accessories. Know what accessories activate the door (remote transmitter keypad etc.)
Drive Type 65:1 Gearbox with #50 Chain Output

.......more details

38000063

Tork Winch Electric Motor 1HP 115V 1Ph

Replacement electric motor for TW 1200

2500-1495

Linear Pushbutton Stop/Reset

63000709

FAAC P Limit Switch Magnetic 746/844 (Rack)

Compatible with the 746 and 844 motors
Replaces discontinued FAAC Part; 7580375

OPHW-6113-M-N4-R

Manaras Opera-H 3/4HP 120V 1Ph w/Carwash Mod Monitored N4 Eyes RH

A heavy-duty industrial jackshaft operator
For use on Standard High and Vertical Lift sectional doors
Can also be used on Rolling doors and Grilles
Comes with a self-engaging chain hoist for manual operation
Clearence: side room required 15"
Carwash Mod installed Nema 4 eyes supplied

.......more details

WHITING-RV

Whiting Stainless Steel Rivet Option for Dry Freight Door

Upgrade option

3257

Whiting General Purpose Bottom Seal #80841

Quote required prior to sale to ensure correct fit

WB-660

Skylink Wireless Wall Console w/ Auto Close for ATR Garage Openers

For use with the Skylink garage door openers.
Oversized Push Button for activating the garage door opener.
Activate opener light on/off and the light will remain on until the button is pressed again.
Feature with Lock function to ignore all radio signals for added security.
Illuminated LED indication.
Easy to Install.

.......more details

1-0242

RW Stay Roller 68 Nylon 2-1/2" Dia

Special Order item
Reverible and adjustable for doors 1-1/2" to 3" thick
Steel frame Zinc plated finish

BEA-35-1566

BEA Power Cable RS-20US IS40

Replacement power cable only 35.1566
Replaces 35-1195
RS-20 US-Colored. Cable gland M16

BPPN17516

Garex Bottom PVC Moulding Black for 1 3/4" Door U shaped 192" (16')

TM1-PLUS

Programmable Timer

6 modes of operation : Delay on operate Delay on release Latching #1 Latching #2 Pulsing #1 Pulsing #2
Adjustable from 1 second to 4 hours with programmable dip switches LED status indicates when timer function is active
Microprocessor based / controlled clock for accuracy of 2%
Operates on a power supply of 12vdc or 24vdc
SPDT relay output : 5 amp 24vdc contacts

GAREX-24X12-GLASS

Garex Thermo Window Clear 24" x 12" Glass Only

An original Garex glass No frame

BCSI-PM02

Pivin Drapeau Bearing 1" FL205 *** Price by Quote Only

OGH-6214-M-N1-RH

Manaras 1 HP 240V 1Ph Gear Head Operator with Monitored ECB N1 Eyes Right Hand

A heavy-duty worm gear industrial operator designed for use on industrial standard high and vertical lift sectional doors or rolling doors and grills.
Includes a self-engaging chain hoist for manual operation
25 cycles per hour 80 cycles a day
Hoist on right side standard can easily be moved to the left in field
Full overload protection
BRACKET112 must be used for wall mounting

.......more details

B/CDJH-34-115-UL

Lynx CDJH Heavy-Duty Jackshaft 3/4 HP 115V w/ ECB and Solenoid Brake Right Hand UL325

3 Button station (NEMA 1) Photoeyes 1-Btn Transmitter
1650 RPM high starting torque motor with overload protection
Inherent Mechanical Brake (I.M.B)
B2 Mode C2 Mode D1 Mode E2 Mode T Mode TS Mode
On board Open Close & Stop for ease of setting limits
Pre-wired to accept sensing devices

.......more details

K41-0372-999

LiftMaster Drive Sprocket Chain Repair Kit

Repair Kit to correct quality issue with TDC1200 & 2200 Maxum trolley openers
MAXUM CDO SKUs affected TDC7S1BMC TDC7S4BMC TDC12S1BMC TDC12S4BMC TDC12X1BMC TDC12X4BMC

CDJH-12-115-CONT

Lynx CDJH Heavy-Duty Jackshaft 1/2 HP 115V Contactor Model

Built-in 3-channel 372 Mhz radio receiver accepts up to 20 remotes
4L V-belt primary reduction #41 drive chain and sprockets.
Adjustable friction clutch Inherent Mechanical Brake included
Solenoid brake optional **
Fully driven adjustable limit switches.
Heavy duty 3 button wall station (Open Close Stop).

.......more details

GALV-273-2-L

Cut-to-Length Torsion Spring .273 x 2" Left Hand Wound Galvanized Orange/Red Price per Inch

Priced per inch - cones sold seperately
For factory installed cones use part no. C-200-INSTALLED

GALV-306-258-L

Cut-to-Length Torsion Spring .306 x 2-5/8" Left Hand Wound Galvanized Red Price per Inch

Priced per inch - cones sold seperately
For factory installed cones use part no. C-258-INSTALLED

GALV-283-258-R

Cut-to-Length Torsion Spring .283 x 2-5/8" Right Hand Wound Galvanized White Price per Inch

Priced per inch - cones sold seperately
For factory installed cones use part no. C-258-INSTALLED

99119671-PER-FOOT

Amarr Bottom U-Seal 3.5" Black Double Dovetail Vinyl 1/4" T Sold per Foot

1/4" T width
Used on Amarr Residential Open Back Doors and Classica models

10FALCON-EXXL100

BEA Falcon Motion Detector w/Exp Proof Housing 100ft Cable Mount 6.5' to 11.5'

FALCON EX combines a microwave activation sensor with an explosion-proof / flame-proof housing
Ideal for use in unique environments such as chemical manufacturing petroleum refining and agriculture.
FALCON EX can be mounted from 6.5' to 11.5' to fit any industrial application.
Nema4/IP66
Detection Zone: Falcon EX XL: 13’ × 6 ½’ @ 8 1⁄5’
Oerating termperature: -22-140F

.......more details

GALV-243-258-R

Cut-to-Length Torsion Spring .243 x 2-5/8" Right Hand Wound Galvanized Price per Inch

Priced per inch - cones sold seperately
For factory installed cones use part no. C-258-INSTALLED

CP-PU-AWNING-1

Lynx Awning Pulley 1" MCJH

GALV-406-6-R

Cut-to-Length Torsion Spring .406 x 6" Right Hand Wound Galvanized Blue/Yellow Price per Inch

Priced per inch - cones sold seperately
For factory installed cones use part no. C-600-INSTALLED
Galvanized

GALV-225-2-L

Cut-to-Length Torsion Spring .225 x 2" Left Hand Wound Galvanized Ornage/Green Price per Inch

Priced per inch - cones sold seperately
For factory installed cones use part no. C-200-INSTALLED

LJH-353-1/2

Doorlec 1/2 HP 575V 3PH Jackshaft Operator

Heavy duty industrial type control station open close stop 24V. control circuit
Universal mounting right or left
Floor level disconnect device electrical and mechanical
Emergency chain hoist operation on LJH model only
Colour code wiring diagrams
Rotary type limit switches readily adjustable in both directions

.......more details

PL-A26-LENS

Lynx Front Light Lens LPL 455+

44-60-160

Extension Spring 10' Door - 160 lbs

Clipped ends
44" long 60" stretch 160 lb load

41D3485

LiftMaster Chain Kit 10'

For use with various chain drive garage door openers that utilize a T-rail and have a 10' garage door
Same as 041D3485

10BOX45RNDSM

4.5" Round Surface Mount Box

4.5 inch round surface-mount box for 4.5 inch round push plates.

MWTA12B

Miller Edge Transmitter with Low Battery Alarm Small

The transmitter comes standard with a NEMA 4 weather-proof enclosure
Compact design that allow for easy troubleshooting.
The transmitter has an audible alarm that activates when the battery has 25% of its life remaining
Easy to configure · Non-monitored system ideal for operators manufactured prior to: · Doors: August 2010 · Gates: January 2016 · NEMA 4 transmitter built to endure rugged environments
Power Source: (2) 1.5 volts AA lithium batteries
Input: 2-wire N.O. sensing edge

.......more details

Installation manual Spec sheet

OTBH-6532-M-N1

Manaras Trolley Operator 1/2 HP 600V 3 Ph Monitored w/N1 Photoeyes

The OTBH is a heavy-duty low headroom trolley operator
Designed for use on industrial standard lift sectional doors
It incorporates a drum-band type solenoid brake
25 cycles per hour 80 cycles per day
1/2 HP operators come with # 48 (410) roller chain

GHX-353-1.5HP-R

Doorlec Explosion Proof Gear Head 1-1/2 HP 575V 3PH ECB Right Hand

Nema 7/9 control box
Electrical connections from motor to control box consists of hazardous location certified fittings
NEMA 7/9 O/C/S push-button station included

MD00128

Micanan #410 Roller Chain 27 Pitch c/w Connecting Link

OGH-6536-M-N1-RH

Manaras 2 HP 600V 3Ph Gear Head Operator Monitored ECB w/N1 Eyes Right Hand

A heavy-duty worm gear industrial operator designed for use on industrial standard high and vertical lift sectional doors or rolling doors and grills.
Includes a self-engaging chain hoist for manual operation
25 cycles per hour 80 cycles a day
Hoist on right side standard can easily be moved to the left in field
Full overload protection
BRACKET112 must be used for wall mounting

.......more details

K002-KEY

Replacement Key for 3BXLT Key #2

Replacement key only for key #K002

837LM

LiftMaster MyQ Smart LED Garage Light Sec+ 2.0

1000 Lumens of LED illumination provide a bright maintenance-free glow.
Unique compact design allows for placement where you need it.
Easy to Install. Conveniently plugs into a standard outlet and mounts on the wall or ceiling.
Control and schedule your LED light from anywhere with the myQ app. Requires a LiftMaster® or Chamberlain® garage door opener with myQ technology Smart Garage® Control or myQ Internet Gateway.
Acts as a garage door opener light (works with Alert-to-Close and Motion Control) when paired to your garage door opener.
Turn lights on and off with the myQ App or your garage remote.

.......more details

837LM Manual (EN/FR)

MOTOR337

Manaras Electric Motor 3/4HP 120/240V 1PH