Devanco Canada

 
User Name:
Password:
Remember Me:
Forgot your password
Request a Login
Home
UTIL025

Utility Limit Switch Telemecanique

Installation Manual
50690

Doorlec Clutch Assembly for ETBH

MW00024

Chain Tensioner for 1"-1" Shafts Inside the Box

  • Chain spreader for installation with 1" operator shaft & 1" door shaft.
  • Includes 2 shaft collars and set screws.
PPV3M

LiftMaster Passport MAX 3-Button Visor Remote

  • Provides total control with one remote for gated communities and commercial properties.
  • Compatible with the PPWR Receiver for gate access control all 315MHz Security+ LiftMaster and Elite Series Gate Openers and all LiftMaster Garage Door Openers manufactured since January 1995
  • 2x the range of standard remote controls
  • Narrow-band transmission on 3 simultaneous frequencies (310 MHz 315 MHz 390 MHz)
MDT-1A

Linear 1-Channel Visor Transmitter MegaCode 318 MHz

  • Compatible with all Linear access receivers and controllers
  • Superior transmission range
  • Factory programmed MegaCode format supports over 1000000 codes
  • Unique ”Extra” top button
  • High visibility operate LED
  • Visor clip included
    • .......more details
Programming instructions
RBH103L5-LH

LiftMaster 1 HP 208/230/460 VAC 3 PH Comm. Hoist Op. Logic 5 Left Hand

  • H-style operators include a floor level chain hoist to ease manual operation in an emergency or power outage.
  • The operators are typically mounted to the wall when used with larger sectional overhead doors with vertical or high lift and mounted to the wall or the front of the hood when used with rolling doors and grilles.
  • H operators are attached to the door jackshaft to indirectly drive the door.
  • With the addition of the 828LM MyQ technology enables the user to monitor and control their operator and light with their smartphone tablet or computer.
  • Alerts can be received as email or pop-up (push) notifications on a mobile device ensuring the status of your commercial door.
  • Security+ 2.0™ safeguards your facility – with every click a new code is sent to the commercial door operator so the door opens only for you.
    • .......more details
37355

Reversing Contactor 120V Coil

CF-101-10

Commercial Side & Top Weather-Strip 10' Long Aluminum / Vinyl

  • Same as Garaga CF101
CRBH751L5-RH

LiftMaster 3/4 HP 115/230 VAC 1 PH Commercial Hoist Operator Logic 5 with Carwash Modification

  • H-style operators include a floor level chain hoist to ease manual operation in an emergency or power outage.
  • The operators are typically mounted to the wall when used with larger sectional overhead doors with vertical or high lift and mounted to the wall or the front of the hood when used with rolling doors and grilles.
  • H operators are attached to the door jackshaft to indirectly drive the door.
  • MyQ® Technology enables you to securely monitor and control your facility operator and lights with your smartphone tablet or computer for greater peace of mind.
  • Alerts can be received as email or pop-up (push) notifications on a mobile device ensuring the status of your commercial door.
  • Security+ 2.0™ safeguards your facility – with every click a new code is sent to the commercial door operator so the door opens only for you.
    • .......more details
LIMIT-KIT-BCSI

Limit Shaft Kit for BCSI Gate Operator ** Price by Quote Only

25-10109

Truck Door 1" Steel Roller 5" Shaft Length for Todco Roll-Up Doors ** NLA

  • Zinc plated Hardened shaft and raceways
  • Seven roller ball design
PRO-H-5011E-LH

Micanan 1/2HP 115V 1P Hoist Operator NM ECB No Eyes Left Hand

  • Continuous duty belt drive jackshaft operator with emergency chain hoist
  • Full function Smart 10.0 Logic control board featuring on-board receiver with antenna
  • Solenoid brake OPTIONAL
  • Non-monitored board NO photoeyes
  • On-Board receiver holds up to 20 transmitters
Installation manualSpecification sheet
MOTOR254

Manaras Electric Motor 1/2HP 120/240V 1PH

  • Continuous-duty base mount 60Hz
  • This item is compatible with BRAKE011
8X118-WHITE

Fasteners Wood Screws painted White 1000/Box

  • Ideal for residential weatherstrip
CP-MO-12R-115/1

Lynx Electric Motor Emerson 1/2 hp 120V Instant Reverse 6 Wire *** NLA

  • Replaces the 4 wire AO Smith electric motor
ALUM-508

Aluminum 24" x 100' Spool Sandalwood / Sable # 508

  • 20% thicker than the aluminum sold in retail stores (0.022" )
  • Gentek # 508
  • Reverse side is #431 Bright White
Colour chart
.319-6-RH

Cut-to-Length Torsion Spring .319 x 6" Right Hand Blue/Green

  • Spring wire only. Cones and Filler extra
PMR10RIT

Carlo Gavazzi Retro-Reflective Sensor with Imperial Connector

  • PMR series sensors have a sensing range up to 32.81 feet and a fixed sensitivity.
  • Immune to ambient light Selectable output function.
  • The plastic housing is IP 67 rated and allows cable or screw terminal connections.
  • Optional timing features include: Delay on operate delay on release or one shot (triggered on leading or trailing edge).
  • 24-240 VAC or 12~240 VDC
  • Relay Output
    • .......more details
WASHER008

Manaras Type A Plain Washer 5/16" Zinc Plated

  • Used on old MJH
XT2564-CUT

Xcluder Rodent Block 4" Black Sold per Foot

  • For commercial and residential applications
  • Creates a tough barrier that is virtually impenetrable to rodents
Sell Sheet
745266

Strobe Low Profile Amber LED Warning Light 12-24VDC

  • Fully encapsulated electronic circuitry ensures a lifetime of trouble-free operation.
  • Installer can select the flash pattern of each high intensity strobe by wiring the unit according to the flash rate preferred.
  • 4 7/8" X 5 7/8" Rubber base Surface mount 12-24VDC
124844

1" Nylon Bushing

R5996

Shaft Collar 1" Split Black Oxide

D6375-164

Cable Drum High Lift 164" 1" Bore Torque Force Pair

  • Maximum hi-lift: 164"
  • Capacity: 800 lbs per drum
  • Cable length: Floor to shaft center 181" minus amount of Hi-Lift
  • Cross reference: DNS 410-164 OMI 164HL M162-4165
K20-1050B-2LP

LiftMaster Electric Motor 1/2 HP 115/230V 1Ph L3 L4

  • Standard 1/2 hp motor
HSC-1000

Hand Swager 1/4" & 5/16"

  • Swages 1/4" and 5/16"
  • Made in Japan
K72-12487

LiftMaster Limit Shaft Kit MT BMT MJ mechanical operators

  • For models MT BMT MJ mechanical operators
  • Includes limit shaft bearings limit nut sprocket. RPM sensor roll pin & e-ring
41C5141-2

LiftMaster Trolley Assembly Belt Drive

  • For retail model
  • For belt drive
SPREADER003

Chain Tensioner for 1-1/4" / 1-1/4"

  • Chain spreader for installation with 1-1/4" operator shaft and 1-1/4" door shaft
  • Designed to keep tension on the chain when used with a wall mount commercial operator. It helps avoid premature wear on the door shaft bearing and commercial operator output shaft bearing
Installation instructions
Z9200

Cable Snubbers Sold as a Pair

  • Prevents slack from forming in cables
  • Sold in pairs
Installation Instructions
34538R

Genie Up Limit Switch Assembly 66" Wire

  • For up direction on a ChainGlide System using magnetic limits
  • For models: 350ML 500ML 700ML 800ML and other ML Series ChainGlide door openers
  • Also for Overhead Door Python ChainGlide garage door openers
  • 66" inches of wire attatched
797

Fasteners Clevis Pin 5/16" x 1" 100/Bag

MWR12

Miller Edge 1-Channel Receiver RF 318 MHz *** To Extent of Inventory

  • The MWR12 receiver is designed to receive information from the transmitter and relay it to the motor to stop or reverse motion if the edge comes into contact with an obstruction.
  • Power requirements: 10 to 40 VDC 10-30 VAC
  • Output: dry relay contact N/O and N/C 1A @60VAC
  • Operating temperature: -40C to 60C
  • Maximum operating distance: 100ft
  • Electrical configuration: optional N/O or N/C
    • .......more details
Installation ManualSell Sheet
MT22-BLACK-RH

Miller Edge 2-Wire Pressure Sensitive Edge Sold per Foot

  • Electromechanical small profile edge for rolling steel foor applicaton. •Touch sensitive signaling allows for immediate stopping or reversing of motion. •The MT22 is completely flexible and will contour to curved surfaces. The MT22 also acts as weatherstrip. •Lead wire: 22 gauge universal •Sensitivity: nominal 6-8 PSI •2 wire NO configuration •Horizontal mount •ANSI/UL325 recognized component •One year warranty
Installation ManualWorksheetSell Sheet
K72-10047

LiftMaster Limit Shaft Kit T APT SD & GH 1/2 HP - 2 HP models L5

  • For models T APT SD & GH 1/2 HP - 2 HP models L5
S2TR2641E2M

Erone 2-Channel Master Transmitter 433MHz

  • One master transmitter is required for each multi-user receiver for doing the programming.
  • Range in open space: 850ft or 250 m
  • One 12V lithium battery included
  • Bronze body with yellow buttons.
Sell SheetBrochureWireless System Chart
029-98200

W-Style Replacement Door White Stainless Steel Package 029-98200

  • Replacement door size between 96-1/4" - 98" wide x 90-100" high
  • Painted white
  • Stainless steel package
  • Includes Hinges Rollers and Cable
02-410B

LiftMaster Commercial Key Control Station Open-Close and Off with Stop Button and BEST Cylinder

  • Outdoor Surface Mount Nema 4/12 station
  • Standard key cylinder is replaced with BEST cylinder
  • Open/Close spring return to center (off)
  • Key removable in center position only
  • With Stop button
59LMC

LiftMaster Outside Keyswitch ** To Extent of Inventory

  • 12 tumblers provide double locking action
  • Self cleaning barrel weather-resistant aluminum plate
  • Cannot be shorted out from exterior with key
  • One "NO" contact used to activate the door operator
  • Includes two keys
Installation Manual
CABLE_532SS-500

Cable 5/32" 7x19 Stainless Steel 500ft

Comparison charts
G3T-BX

Genie 3-btn Dual Frequency Transmitter 37218R

  • This transmitter replaces all Intellicode and Overhead Door Code Dodger transmitters made after 1997.
  • For Intellicode operators pre-1997 use GITR3 for best results
  • Operates with 315 & 390 MHz Intellicode 2 technology
  • Able to control up to 3 garage doors
  • Visor clip and battery CR2032 included
  • Replaces: GIT GIC90 GMIC90 G2T OCDT ACSCTG TBSTG GIT-1 GIT-2 GIT-3 ACSCTG Type 1 ACSCTG Type 2 ACSCTG Type 3 TBSTG GIC90-1 GMIC90-3 GIC90-2 GMIC-3BL GIC90-3 OCDT-1 OCDT-2 OCDT-3 G2T-1 G2T-2 G2T-3 GICTD-1 GICT390-1 GIFT390-1 GIT390-4
    • .......more details
Programming InstructionsInstructions de programmation
41A5021-9G-315

LiftMaster Circuit Board Assembly

  • Board: Security+ 315 MHz
  • Aeesmbly includes: circuit board and end panel
  • Also includes 1 Multi-Function wall ctrl panel - 2 wire
  • For ATS2113X model
  • For older ATS operators use replacement board 41A5021-1ATS
7FT-RAIL-BELT

LiftMaster 7' belt drive rail 2777BD - colour code: Grey

  • Price reflects cost if purchased with an opener
13-10024

LiftMaster Limit Nut

  • Limit nut / cam for commercial door and gate operators
VBELT_5L350

Manaras VBelt 5L 35" - repl. by B32

  • Used on MTH MTBH MSL models
  • Type B
  • Inside length 32 inches
DT2A

Linear 2-btn Delta3 Transmitter 310 MHz (DNT00017A)

  • Activates two Delta-3 receivers independently
  • Test/operate LED
  • Visor mounting clip supplied
  • Power: 9-volt battery
  • Codes: 256 (set by dip switches)
  • RF frequency: 310 MHz
    • .......more details
Programming Instructions
27-20301

Truck Door Cable Drum Curbside (RH) for Todco Roll-Up Doors

  • Cast aluminum construction
  • Large die cast cable drums are grooved to prevent cables from binding or wearing prematurely.
  • Angle of cable slot determines left or right drum.
  • Holds up to 130" door cable
  • Cross Reference: T #59033-1 T #59129-1 W #4013 330100
26-40402

Truck Door Reefer Side Seal 98" Long for Whiting Coldsaver

  • Co-extruded using PVC backing with flexible PVC seal against the door.
  • Cross Reference: W #7470
H11G03

Hinge #3 x 11 gauge

  • 11 gauge # 3 hinge - 0.72 lbs
  • Bright zinc-plated steel construction
  • For use with 7/16" stem rollers
RS1034

Roller 3" Steel 4" stem 10 ball

  • Steel Roller Wheel diameter: 3"
  • Working length: 3.38"
  • Overall length: 4.75"
  • Box qty: 50 Box weight: 35.8 lbs (3-4-10 Steel)
25-10103

Truck Door 2" Sealed Roller Steel for Whiting Roll-Up Doors

  • Zinc plated finish 10 roller ball design
  • Shaft Length: 2.62" Overall Length: 3.41"
D-TEK-LM

EMX Industries Plug-in Loop Detector for Liftmaster operators ** To extent of inventory

  • Plug-in Loop detector for SL575 SL585 SL595 BG770 BG 79024VAC
  • Works with most LiftMaster gate operators
  • Won't work with Elite Series Mega Arm Slide & Swing
  • Simply plug it into the harness already in the operator
  • Loop lead-in wires connect to operator terminal strip
  • Gold plated control contacts
    • .......more details
Installation ManualSell Sheet
4X8PO50

Devanco Loop 4' x 8' pave-over 50' lead-in

  • Ideal for use on with gravel driveways or surfaces that are to be asphalted
  • Features a twisted lead-in to reduce the chances of interference and false detections.
  • Direct burial loops should be buried approximately 6" deep
Installation InstructionsInstructions d'installationSpec SheetBrochureLoop Placement GuideGuide de positionnement des boucles
KPW5

LiftMaster New Wireless Commercial Keypad 5-Code Sec.+2.0

  • Designed to work exclusively with Security+ 2.0
  • 5 permanent PINs and 10 unique temporary PINs ideal for residential and small commercial applications; unique temporary PINs can be set for 1 to 9 uses
  • Allows for removal of a single PIN while maintaining full access for other users
  • High-impact polycarbonate front cover; perfect for rugged outdoor environment
  • Blue backlit metal keypad makes it easy to use under low-light conditions
  • Electronics are fully sealed and meet NEMA 4X water protection requirements
    • .......more details
Programming instructionsInstructions de programmationSell sheetBrochureCompatibility chart
BSG115-LED

Devanco Stop and Go Light Black Housing 115V LED

  • LED Traffic Light Red/Green Dock Light
  • Weather-proof 2 piece housing with highest available UV rating
  • Ultra bright LED's for easy viewing in direct sunlight
  • Lenses measure nearly 4" in diameter
  • Requires 4 wall mounting screws 1/4" or 5/16" thread - not supplied
  • Made in Canada
    • .......more details
Installation InstructionsInstructions d'installationSell Sheet
Z9961

Maxum Operator Mounting Bracket

  • Compatible with MAXUM® Jackshaft operators
  • Eliminates the need for a spreader arm by mounting a fixed bearing on the operator adjustment plate preventing the torsion shaft and operator from moving closer together
  • Precise chain tension adjustments through the adjustment bolt
  • Maintains parallel alignment between the operator output shaft and the door’s torsion shaft during chain tensioning
  • Operator installation is made easier by allowing the bracket to be hung on the torsion shaft via the bearing supporting its weight during fastener installation thereby removing the need to hold the operator manually
  • Has physical tick marks on both sides of the bracket and at the center of the bearing plate to indicate the torsion shaft’s center position allowing bracket to be accurately mounted prior torsion shaft installation
    • .......more details
Installation Manual
TDC22X1BMC

LiftMaster MAXUM Trolley DC Comm. Op 3/4HP Equivalent 120/240V 1PH 60 Cycles/Hr 2200LB

  • Smooth Start/Stop Operation - DC high-efficiency motor and gearbox provides the power needed and smooth start and stop to reduce wear-and-tear on your door and operator.
  • Faster Speed - Average of 12” per second opening on sectional doors.
  • Battery Backup Option - (battery backup kit sold separately).
  • Floor-Level Wall Controller - 4-line LCD display gives you access to programming troubleshooting and diagnostics at floor level saving time and money.
  • Wi-Fi® and myQ® - Easily connect to myQ Facility via Wi-Fi for visibility into what is happening at your door and control it from your web browser; no need for additional hubs or accessories. Know what accessories activate the door (remote transmitter keypad etc.)
  • Drive Type 65:1 Gearbox with #50 Chain Output
    • .......more details
OSH-6234-M-N1-RH

Manaras Opera-SH 1 HP 208V 3 Ph Monitored Board w/N1 Eyes RH

  • An ultra high-end heavy-duty V-belt drive industrial jackshaft operator
  • For use on Standard High and Vertical Lift sectional doors
  • Can also be used on Rolling doors and Grilles
  • Comes with a chain hoist for manual operation and a floor level engaging device
  • Clearence: side room required 16"
  • 25 cycles per day > 100 cycles per day
    • .......more details
Installation Manual
29201

Doorlec Transformer 460V pr 120V sec 35VA

  • 460V prImary 120V secondary 35VA
15-50B32LGH

Sprocket 50B32 1" shaft 1/4" KW

  • 71-1550B32LGH is a 32 Tooth Sprocket Kit 1" Bore x 1/4" keyway (50B32).
  • For use with various LiftMaster® Logic 4.0/5.0 and MAXUM DC Standard-Duty and Industrial-Duty Commercial Door Operators
TDC7-8

Liftmaster Comm. 8FT Trolley Angle set (10-5808-P x 2) and #48 chain pack (TDC48-08) ***Actual length 131*

  • Double Angle Rails for doors up to 8'6" high
  • Includes #48 chain pack
GALV-331-258-144-R

Torsion Spring .331 x 2-5/8" x 12ft RH Galvanized Red/White

  • Wire size: .331
  • Inside diameter: 2-5/8"
  • Length: 12 ft
  • Galvanized
XF208VAC12

LiftMaster 208V Transformer Kit 1200

VTS3-PER-FOOT

Top Seal vinyl only Black Price per Foot

P-8833T-OCS

Pulsar 3-btn 1-Door O/C/S Transmitter 109372-Compatible 318 MHz

  • Open/Close/Stop remote for 1 door
  • Compatible with 3-channel Allstar and MVP receivers
  • Portable transmitter
  • Easy access to battery and coding switch
  • Power: 9-volt battery
  • Codes: 6561 (set by eight trinary dip switches)
    • .......more details
CCTD-04

Fuse 600VAC/300VDC Class CC Time Delay 4AMP Sold per Fuse

  • Sold per fuse
227967

Linear Door Arm Bent LCO75

Replacement Parts List
CG-HOIST-DBLE-114

ControlGard Chain Hoist Double Compound 1-1/4" Bore

  • Cornell Double Compound hoists are designed for larger doors
  • Features an integral braking system that only moves when the user is actively pulling the chain
7-6088

RW Hanger 321 For use with #31 Track

PHOTO-060

Manaras Non-Monitored Photoelectric Cells N4/12 & IP67 Retro-Reflective 39' Range incl 3" Reflector

  • Retro-Reflective photo cell
OSH-6113-M-N1-RH

Manaras Opera-SH 3/4HP 120V 1Ph Monitored Board w/N1 Eyes RH

  • An ultra high-end heavy-duty V-belt drive industrial jackshaft operator
  • For use on Standard High and Vertical Lift sectional doors
  • Can also be used on Rolling doors and Grilles
  • Comes with a chain hoist for manual operation and a floor level engaging device
  • Clearence: side room required 16"
  • 25 cycles per day > 100 cycles per day
    • .......more details
Installation ManualSell Sheet
ZAP-AX27-VBELT

Zap VBelt Cogged AX27

  • Compatible with: 8816-C 8826-C 8825-D 825-SS Series 1 or 2 Models
  • 8825-C 8826-C Series 3 Models
5415-2

EMX RAVEN Dual Relay Microwave Motion Sensor

  • Distinguish between vehicles and pedestrians
  • Two configurable relay outputs
  • Adjustable sensitivity and cross traffic suppression
  • 8-23 ft (2.5-7 m) mounting height
  • Optional remote control for easy programming
LA412DC

LiftMaster replacement 12VDC Solar Actuator Arm

  • he LA412 Arm runs on 12V and connot be subbed for LA400 Arm
CP-LX900

Lynx Control Board with Cover for MDJ models

  • works only on MDJ (medium -Duty Jackshaft) models
  • UL325 compliant with B2 C2 modes
  • includes on-board Timer-To-Close
  • On-Board 372MHz radio receiver accepts 20 remotes
MDJ Installation manual
LRS-LC

EMX Logic Controller

  • For use with the Loop Replacement System (LRS-C1) Magnetoresistive Vehicle Detector Control Unit
  • Connects two stand-alone sensors to expand the detection area
  • Works with LRS-DB (LRS-DB-50 or LRS-DB-100) Direct Burial or LRS-FP Flat Pack (LRS-FP-50 or LRS-FP-100)
  • Logic Interface allows one (1) or two (2) sensors to be connected to one (1) output
  • Provides six (6) selectable logic functions and two (2) separate relay outputs
  • A/B directional logic can be selected with an output for each direction of travel as a vehicle passes over two sensors
    • .......more details
751-CDN

Fasteners Self Drill & Tap Tek Screw 1/4-20 x 1" (#2PT) Canadian Steel - 1000/Bag

  • 7/16" Head
  • Indented hex washer head
  • Max RPM = 2000
  • Made in Canada with Canadian Steel
OE-LHR-SET

Low Headroom Quick Close Device 2" track Sold as a Pair

  • Includes 1 RH & 1 LH bracket
  • Steel with zinc plated finish
  • Set includes: 1 x fastener bag 1 x stop lip bracket (L&R) 1 x LHR roller holder (L&R) and instructions
  • Used on torsion or extension spring doors up to 8'H
  • Operate extension spring doors in a minimum of 7" of headroom
  • Door won't go higher than top of spring shaft when door is opened.
    • .......more details
Installation diagram page 1Installation diagram page 2
GH-353-1.5

Doorlec Industrial Gearhead Door Operator 1.5 HP 575V 3-Phase

  • Extra Deavy-Duty Gearhead Industrial Operator or large Sectional or Rolling Steel Doors
  • DC-2000 Logic Board with adjustable Timer To Close Delay On Reverse and Traffic Light Control
  • Worm gear reducer 40:1 ratio for high-torque and long life
  • Solenoid Disk Brake Prevents coasting and secures the door when closed
  • TEFC (sealed) continuous-duty electric motor with overload protection
  • Optional Friction Clutch available
    • .......more details
15450

Doorlec Tubular heater 120V for Gate Operators

EHJW-311-3/4

Doorlec Ind Jackshaft Op. Watertight ECB 3/4 HP 120V-1Ph

  • Heavy-Duty Industrial Operator with Waterproof Mod. for Sectional or Rolling Steel Doors
  • DC-2000 logic with adjustable Timer-To-Close Delay On Reverse and Traffic Light Control (monitored board optional)
  • Solenoid Brake prevents coasting and secures the door when closed
  • TEFC (sealed) continuous duty electric motor with overload protection
  • Automatic Friction Clutch protects the door and operator
  • Self-aligning Heavy Duty sealed Pillow Block bearings on all shafts for high cycle applications
    • .......more details
5009-559-PAINT

Aluminum Touch Up Paint Nail Polish Style Pebble / Kaki # 559

  • Glass bottle and brush applicator
12-12004

LiftMaster 1" Ball Bearing

  • For use with various LiftMaster® Heavy Industrial-Duty Commercial Door Operators
  • Drive shaft bearing used on RBH
  • Same as K12-12004
PHOTO-075

Manaras Non-Mon. Retro-Refl. Photo Cells Exterior 24V IP67 0.5-32' Range.

  • Non-Monitored reflective Photoelectric manufactured by Sick
Manual
RADIO-EM102

Manaras Mini 3-btn Rolling Code transmitter 390 MHz

  • Field Configurable
  • Hand Held or Keychain three button
  • Rolling Code Technology
  • 1 Door (SD) Open/Close/Stop or Multiple Doors (MD) 1-3 single-button field selectable
  • Config. Trad. Comm. Sesquence or Alternating Sequence (SBC) Open/Close/Stop (with ECB)
  • Nema 1
    • .......more details
Manual
2000Z

LiftMaster HD Roller Cage Bearing Hinge Flat Mount Both Sides Prime Coated Sold in Pairs

  • Heavy Duty Construction for Maximum Durability
  • Dependable Roller Cage Bearing Design
  • Even Weight Distribution
  • Five Times The Weight-Bearing Surface of the Nearest Large Hinge
  • Largest Weld Surface in the Industry
  • Easy to Fully Lubricate
    • .......more details
22253

Doorlec Flush Mount Key Switch O/C Tamperproof

  • Flush mount momentary-contact spring return key switch OPEN/CLOSE in TAMPER PROOF EEMAC 1 enclosure with gasketed aluminium cover.
  • Key removable at centre only.
  • Can open or close door.
  • Recommended applications: laboratories schools hospitals food processing plants or any other area where sanitary and high security condition are important.
BK338/PR

End Bearing Plate Flanged 11-GA 3-3/8" with Bearing. Commercial Sold as a pair

  • For commercial applications Used on wood jambs
  • Includes (1) RH and (1) LH plate with bearing
  • EBF338
31110

Doorlec Sprocket 50B23 1" Bore KW/SS

41A5807

LiftMaster Chain and Cable Kit 7' Door

  • This is a one piece 7 ft. Chain and Cable Replacement Kit
RN1124-10

Roller 2" Nylon 4" stem 11 ball White 10/PKG Sold per Pack

  • White Nylon Roller Wheel Diameter: 2"
  • Working Length: 3.75" Overall Length: 4.69"
  • Box qty: 15 packs of 10 Box weight: 49 lbs (2-4-11 White Nylon)
1004-134-8'

Aluminum Bottom Retainer 1 3/4" U-Shape with Reinforcement 8 ft**Actual Length 8'2"***

  • For door thickness 1-3/4"
RBH105L5-LH

LiftMaster 1 HP 575 VAC 3 PH Comm. Hoist Op. Logic 5 Left Hand

  • H-style operators include a floor level chain hoist to ease manual operation in an emergency or power outage.
  • The operators are typically mounted to the wall when used with larger sectional overhead doors with vertical or high lift and mounted to the wall or the front of the hood when used with rolling doors and grilles.
  • H operators are attached to the door jackshaft to indirectly drive the door.
  • With the addition of the 828LM MyQ technology enables the user to monitor and control their operator and light with their smartphone tablet or computer.
  • Alerts can be received as email or pop-up (push) notifications on a mobile device ensuring the status of your commercial door.
  • Security+ 2.0™ safeguards your facility – with every click a new code is sent to the commercial door operator so the door opens only for you.
    • .......more details
950-193

Richards-Wilcox 3" Single Btm Roller Carrier w/ Roller Carrier Tube for Short Stem Roller

  • Original RW part
30001

Doorlec Brake Solenoid 575V with wire leads

3055

End Stile Keyed L-Handle With Locking Cylinder and 7-1/2" Latch Mechanism

1004-2-12'

Aluminum Bottom Retainer 2" U-Shape with Reinforcement 12 ft***Actual Length 12'2"***

  • For door thickness 2"
SM101

Miller Edge Signature Module for T3 Monitored Plugs w/ JB-03

  • Commercial signature module for use in commercial door and gate operators built after August 29 2010.
  • Engineered to emulate monitored pulse signal required by some commercial door operators.
  • LED light indicates device power or fault conditions.
  • Nema 4
  • Temperature range: -31F to 158F
  • 5 to 40V DC
    • .......more details
K002B0799-3

LiftMaster Cam and Lock Kit for EL1SS

  • Also known as: SNRLOCK 002B0799-3 SN6900110
MV-00262

Micanan Coax Cable Kit 12'