Devanco Canada

 
User Name:
Password:
Remember Me:
Forgot your password
Request a Login
Home
1104-8FT-SAND

Residential Side & Top PVC Weather-Strip with cap 8' Long - Sandstone (D)

  • Sandstone rigid vinyl retainer with sandstone flexible vinyl seal.
  • Dual fin vinyl.
  • Comes with cap to hide screws.
  • Also known as Taupe
1106-14-BLACK

Commercial Side & Top Weather-Strip 14' Long - Black

  • Aluminum retainer with black dual fin vinyl
1106-8-BLACK

Commercial Side & Top Weather-Strip 8' Long - Black

  • Aluminum retainer with black dual fin vinyl
1106-10-BLACK

Commercial Side & Top Weather-Strip 10' Long - Black

  • Aluminum retainer with black dual fin vinyl
1102-18-BLACK

Commercial Side & Top Weather-Strip 18' Long - Black

  • Aluminum retainer with black heavy-duty dual fin vinyl.
1001-24-BLACK

Commercial Side & Top Weather-Strip 24' Long - Black

  • Aluminum retainer with black dual-fin vinyl
1001-8-GREY

Commercial Side & Top Weather-Strip 8' Long - Grey

  • Aluminum retainer with grey dual-fin vinyl
  • Sold by full case quantity (10)
1001-8-BLACK

Commercial Side & Top Weather-Strip 8' Long - Black

  • Aluminum retainer with black dual-fin vinyl
32-48-220

Extension Spring 8' Door - 220 lbs Green ** Replaced by 27-48-220

  • Double - Loop
  • 32" long 48" stretch 220 lb load
  • Springs sold individually
Spec Sheet
32-48-180

Extension Spring 8' Door - 180 lbs Gold ** Replaced by 27-48-180

  • Double - Loop
  • 32" long 48" stretch 180 lb load
  • Springs sold individually
Spec Sheet
32-48-130

Extension Spring 8' Door - 130 lbs Yellow ** Replaced by 27-48-130

  • Double - Loop
  • 32" long 48" stretch 130 lb load
  • Springs sold individually
Spec Sheet
32-48-110

Extension Spring 8' Door - 110 lbs White ** Replaced by 27-48-110

  • Double - Loop
  • 32" long 48" stretch 110 lb load
  • Springs sold individually
Spec Sheet
25-42-80

Extension Spring 7' Door - 80 lbs Gold

  • Double - Loop
  • 25" long 42" stretch 80 lb load
  • Sold individually
  • Rated for 10000 cycles
Spec Sheet
25-42-90

Extension Spring 7' Door - 90 lbs Light Blue

  • Double - Loop
  • 25" long 42" stretch 90 lb load
  • Sold individually
  • Same as part number 109
  • Rated for 10000 cycles
Spec Sheet
33LMC

LiftMaster 3-btn O/C/S Transmitter 390MHz *** Available to Extent of Inventory** use 813lmx

  • 390 MHz 9 dip switch three button visor remote
  • Can be used for Open/Stop/Close when used with the LiftMaster 423LMC receiver.
  • Visor clip & 12V battery included (ALK12V)
  • Same as 33LM
  • Can be used as a substitute for 63LMC
Programming InstructionsInstructions de programmation
95-00115

Truck Door Rivet 1-1/8" Stainless Steel

  • Stainless steel construction
  • Round head design
  • Cross Reference: T #89217-0036
28-02290

Truck Door 2" Vertical Track & Right Angle Assembly 96.5" Curbside (RH) for Whiting Roll-Up Doors

  • SPECS: Length: 96.5" Fits door sizes: 72" - 90" high
  • Assembly includes: Right angle mounting track Vertical track and Torsion bracket
  • Cross Reference: W #2275-1
  • Galvanized steel 14 gauge construction
  • Tongue and groove for proper alignment at joints
28-02201

Truck Door 2" Vertical Track & Right Angle Assembly 106.5" Curbside (RH) for Whiting Roll-Up Doors

  • SPECS: Length: 106.5" Fits door sizes: 91" - 100" high
  • Assembly includes: Right angle mounting track Vertical track and Torsion bracket
  • Cross Reference: W #2275-1
  • Galvanized steel 14 gauge construction
  • Tongue and groove for proper alignment at joints
28-02114

Truck Door 2" Vertical Track and Right Angle Assembly 120" Roadside (LH) for Whiting Roll-Up doors

  • SPECS: Length: 120" Fits door sizes: 101" - 114" high
  • Assembly includes: Right angle mounting track Vertical track and Torsion bracket
  • Cross Reference: W #2275-2
  • Galvanized steel 14 gauge construction
  • Tongue and groove for proper alignment at joints
27-24403

Truck Door Dual Torsion Spring Assembly 93/35 for Whiting Roll-Up Doors

  • Assembly includes: shaft LH & RH springs winding cones cable drums with bearings and spring spacers.
  • Springs are treated with rust preventative
  • Roadside cable drum is color coded RED
  • Specs: Shaft Length: 93" Spring Length: 35" Wire diameter: .187 Winding cone color: White
27-24202

Truck Door Single Torsion Spring Assembly 98/60 for Toco Roll-Up Doors

  • Single counterbalanced spring design available in 36" 48" and 60" spring lengths.
  • Shaft Length: 98" Spring Length: 60" Wire Size: .243
  • Quick and easy counterbalance spring adjustment with easy calibration to door size and weight for effortless operation.
  • Springs treated with rust preventative
  • Heavy .243 dia. spring wire
  • Heavy-duty cast aluminum cable drums hold up to 130" of cable
    • .......more details
27-24400

Truck Door Dual Torsion Spring Assembly 87/33 for Whiting Roll-Up Doors

  • Assembly includes: shaft LH & RH springs winding cones cable drums with bearings and spring spacers.
  • Springs are treated with rust preventative
  • Roadside cable drum is color coded RED
  • Specs: Shaft Length: 87" Spring Length: 33" Wire diameter: .182 - Winding cone color: Green
26-94323

Truck Door Bottom Panel with Seal (13" x 98") for Whiting Dryfreight

  • These panels are cut to an extra wide width to fit wider vehicle applications.
  • Interlocking tongue and groove design for weather-tight joint and proper panel alignment.
  • These panels have no routs and shipped without holes.
  • 3/4" thick 7 ply exterior grade medium density plywood. Primer Finish
  • Comes only with bottom retainer and seal (installed)
26-94321

Truck Door Bottom Panel with Seal (11" x 98") for Whiting Dryfreight

  • These panels are cut to an extra wide width to fit wider vehicle applications.
  • Interlocking tongue and groove design for weather-tight joint and proper panel alignment.
  • These panels have no routs and shipped without holes.
  • 3/4" thick 7 ply exterior grade medium density plywood. Primer Finish
  • Comes only with bottom retainer and seal (installed)
26-40202

Truck Door Head Seal Retainer Only 96" Long for Roll-Up Doors

  • Retainer extrusion is constructed of high quality aluminum.
  • Panel mounted retainer
  • Cross Reference: T #69790 500000
26-40026

Truck Door U-Channel Seal Retainer 96" Long for Whiting DryFreight Doors *** DISCONTINUED

  • Aluminum extrusion construction
  • Cross Reference: W #1801
26-14522

Truck Door Intermediate Panel (12" x 98") for Todco DryFreight Doors

  • These panels are cut to an extra wide width to fit wider vehicle applications.
  • Interlocking tongue and groove design for weather-tight joint and proper alignment.
  • 3/4" thick 7 ply exterior grade medium density plywood. Primer finish
25-60050

Truck Door Latch Plate for Todco Roll-Up Doors

  • Steel construction Zinc plated finish
  • Contoured for proper lock engagement
  • Cross Reference: T #70093 W #4021 270700
HD8460-138

T-Handle Cable Lock System 1-3/8" ***Use HD8460-200 instead***

  • Complete cable locking system for 1-3/8" door.
  • System Includes: Auto Latch Striker Keeper T-Handle keyed with 4" shaft Inside Release Handle 3/32" cable and all required hardware.
DM28VL-125

Cable Drum Vertical Lift 28' 1350-28 (1-1/4") Pair

  • 28' Vertical Lift aluminum die cast alloy for 1-1/4" shaft.
  • 3/8"-16 x2" hardened cup point set screws installed with red heads. -
  • Color coded: Red=LH and Black=RH. Pair includes (1) LH and (1) RH.
  • Max. Door Height: 28'-1".
  • Rated Lift per Drum: 1100 lbs.
  • Max. Cable Diameter: 1/4".
    • .......more details
DM28VL

Cable Drum Vertical Lift 28' 1350-28 1" Bore Pair

  • 28' Vertical Lift aluminum die cast alloy. •3/8"-16 x2" hardened cup point set screws installed with red heads.
  • Color coded: Red=LH and Black=RH. Pair includes (1) LH and (1) RH.
  • Max. Door Height: 28'-1".
  • Rated Lift per Drum: 1100 lbs.
  • Max. Cable Diameter: 1/4".
  • Mounting: 1" (or 1-1/4" must specify when ordering) solid shaft with 1/4" keyway.
    • .......more details
DM32-125

Cable Drum Standard Lift 32' 800-32 (1-1/4") Pair Torque Force

  • 32 ft Standard lift aluminum die cast alloy cable drums for 1-1/4" shaft.
  • Pair includes (1) LH & (1) RH. Color coded: Red=LH and Black=RH.
  • 3/8"-16 x 2" hardened cup point set screws installed with red heads.
  • Maximum Door Height: 32'-1".
  • Rated Lift per Drum: 1000 lbs.
  • Max Cable Diameter: 1/4".
    • .......more details
CBB18

Stop & Sleeve 1/8" 100 pair

  • Includes 100 stops and 100 oval sleeves
H11G11

Hinge #11 x 11 gauge

  • 11 gauge # 11 hinge - 0.93 lbs
  • Bright zinc-plated steel construction
  • For use with 7/16" stem rollers
EP2987

Exhaust Port 6" with latch long barrel ** Discontinued

  • 6" inside diameter 2" sleeve with latch.
  • Includes fasteners & gaskets.
CBC18

Thimble 1/8" - 100 per pkg

CB5320500

Cable 5/32" 7x19 500' Galvanized

  • Galvanized cable 5/32" 7x19 500ft spool.
  • Cable break strength: 2800 lbs
Comparison charts
RS1039

Roller 3" Steel 9" stem 10 ball - To Extent of Inventory. Replaced by RS1039-C

  • Steel Roller Wheel diameter: 3"
  • Working length: 8.5"
  • Overall length: 9.64"
  • Box qty: 60 Box weight: 49.6 lbs (3-9-10 Steel)
25-10276

Truck Door Universal Center Hinge Flush Mount **To extent of inventory

  • Steel construction Zinc plated finish
  • Eliminates routing of panels for easier installation
  • Cross Reference: H-325709
25-10113**DISC

Truck Door 2" Steel Roller Long Stem for Whiting Roll-Up Doors Use Part # 94-61180-33-84

  • Unplated shaft 10 roller ball design
  • Shaft Length: 6.5" Overall Length: 7.5"
  • Long stem roller has a staked collar design versus machined collar on others.
IRB-4X

EMX Industries Nema 4 Through-Beam Photocells with Hoods *** No longer available

  • Outdoor and carwash through beam Commercial Photocells.
  • Up to 115' sensing distance
  • Electronic sunlight filter
  • Automatic compensation for temperature changes
  • 12 to 24VAC/DC input voltage
  • one form C relay (NO and NC output)
    • .......more details
Installation ManualSell Sheet
6X10SC50

Devanco Loop 6' x 10' saw-cut 50' lead-in

  • Manufactured to the highest quality standards to ensure accurate detection our Pre-formed loops come with a 50 foot twisted lead-in ware and available lead-in lengths up to 500 feet.
  • Ideal for use on existing asphalt or concrete surfaces
  • Features a non spliced continuous wire throughout loop turns and lead-in.
  • requires the use of loop sealer when being installed to ensure long lasting trouble-free detection
Installation InstructionsInstructions d'installationLoop Placement GuideGuide de positionnement des boucles
4X6SC50

Devanco Loop 4' x 6' saw-cut 50' lead-in

  • Manufactured to the highest quality standards to ensure accurate detection our Pre-formed loops come with a 50 foot twisted lead-in ware and available lead-in lengths up to 500 feet.
  • Ideal for use on existing asphalt or concrete surfaces
  • Features a non spliced continuous wire throughout loop turns and lead-in.
  • requires the use of loop sealer when being installed to ensure long lasting trouble-free detection
Installation InstructionsInstructions d'installationLoop Placement GuideGuide de positionnement des boucles
6X10PO50

Devanco Loop 6' x 10' pave-over 50' lead-in

  • Ideal for use on with gravel driveways or sufaces that are to be asphalted
  • Features a twisted lead-in to reduce the chances of interference and false detections.
  • Direct burial loops should be buried approximately 6" deep
Installation InstructionsInstructions d'installationSpec SheetBrochureLoop Placement GuideGuide de positionnement des boucles
1104-12FT-WHITE

Residential Side & Top PVC Weather-Strip with cap 12' Long - White (W)

  • White rigid retainer with white flexible vinyl.
  • Dual fin vinyl.
  • Comes with cap to hide screws.
.295_6"-RH

Torsion Spring .295 x 6" x 12ft RH Blue

  • Wire size: .295
  • Inside diameter: 6"
  • Length: 12 ft
LB612-36

Laminated Bumper Standard Black 12" x 36" 6" Projection Horizontal Installation

  • For use in low to medium traffic loading docks in factories and warehouses.
  • Can be used as rub rails at the sides of truck wells
  • Fabric reinforced rubber pads cut from recycled truck tires.
  • Rubber pads laminated between steel angles and secured with 3/4” rods
  • Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
  • Wall mounting hole size is 7/8” diameter.
    • .......more details
27-20305

Truck Door Balancer Bracket Center for Whiting Roll-Up Doors

  • Steel construction
  • Plain finish
  • Cross Reference: W #2525
DF090.2

Whiting Dry Freight Door 3/4" without Track or Balancer

  • Original Whiting dry freight replacement door for serial # 99164
16094

Whiting Premium Plate Bottom Channel 96"

  • With end hole removed - replacement for serial # 165462
OSH-6812-ECB-LH

Manaras Opera-SH 1/2 HP 208V 1Ph with Electronic Circuit Board Left hand

  • An ultra high-end heavy-duty V-belt drive industrial jackshaft operator
  • For use on Standard High and Vertical Lift sectional doors
  • Can also be used on Rolling doors and Grilles
  • Comes with a chain hoist for manual operation and a floor level engaging device
  • Clearence: side room required 16"
  • 25 cycles per day > 100 cycles per day
    • .......more details
12513

Doorlec Pocket Wheel with 1" Oilite EHJ

PRO-APTB-7553-U

Micanan 3/4HP 575V 3P Apartment Trolley Operator N1 Eyes Monitored ECB with Brake

  • Designed for use on Commercial / Industrial high cycle sectional overhead doors with standard lift tracks.
  • Low clearance design for apartment applications (9.5")
  • External radio control terminal strip
  • 3-btn O/C/S control station Nema-1
  • Solenoid brake installed
  • Door speed 12" per second
    • .......more details
.421-6-R-C

Cut-to-Length Torsion Spring .421 x 6" Right Hand Wound Coated ** Price by Quote Only

  • Priced per inch - cones & filler sold seperately
  • For factory installed cones use part no. C-600-INSTALLED
510.4302.05

Whiting Stainless Steel Interior Hdwr Pkg 4 Rows Hinges 5 Panel

  • This is an Add-On option when buying a truck door
GHX-311-3/4-LH

Doorlec Explosion Proof Gear Head 3/4 HP 120V 1PH ECB Left Hand

  • Nema 7/9 control box
  • Electrical connections from motor to control box consists of hazardous location certified fittings
  • NEMA 7/9 O/C/S push-button station included
41A3473

LiftMaster Chain and Cable Kit 7'

  • Also known as: 65410 41A3473
  • One piece 7 ft. chain and cable replacement kit installed on 7ft garage door
99552NYHNG

Nylon Hinge Black #2 *** To extent of inventory

  • Equivalent to 14-ga in strength
41A2817

LiftMaster Drive Gear and Worm Kit (No Sprocket)

  • Also known as: 081B0045 062216 081C0179 81B45 2612159
Installation ManualManuel d'Installation
PRO-APT-5011-U

Micanan 1/2HP 115V 1P Apartment Trolley Operator N1 Eyes Monitored ECB (PRO APTE)

  • Low clearance design for APT applications (9.5")
  • Door speed: 12" per second
  • Monitored board
  • On-Board receiver holds up to 20 transmitters
Installation manualSpecification sheet
OSH-6114-CONT-R

Manaras Opera-SH 1HP 120V 1Ph Contactor Right Hand

  • An ultra high-end heavy-duty V-belt drive industrial jackshaft operator
  • For use on Standard High and Vertical Lift sectional doors
  • Can also be used on Rolling doors and Grilles
  • Comes with a chain hoist for manual operation and a floor level engaging device
  • Clearence: side room required 16"
  • 25 cycles per day > 100 cycles per day
    • .......more details
Installation ManualSell Sheet
SHAFT002

Manaras Hand Crank Shaft 5/8" Sold per Foot Max. Length 12ft

  • Must specify exact length required when ordering
SN1600341-K

LiftMaster Sentex Bypass PCB for TAC1 EL25

  • BY PASS Board for 1150051
  • Same as KSN1600341B
E/BLOP/150

Automatic Systems Safety Edge for BL229 14'-9" (EABLOP/150)

E/1929/031

Automatic Systems Installation Plate Ass'y BL229

  • Used on the BL229 gate op.
830

Fasteners Wood Screw #8 x 3" Flat Head Course Thread Zinc Plated 1000/Box

  • Drive style: Robertson / Square head
  • Plain thread
PRO-GT-7523-U

Micanan 3/4HP 230V 3P Worm Gear Trolley Operator N1 Eyes Monitored ECB

1104-10FT-WHITE

Residential Side & Top PVC Weather-Strip with cap 10' Long - White (W)

  • White rigid retainer with white flexible vinyl.
  • Dual fin vinyl.
  • Comes with cap to hide screws.
MH00099

Micanan Bearing

  • Fits PRO-APT and PRO-HHD
  • Requires 2 per shaft
  • 3/4" Bore
OGH-6433-ECB

Manaras 3/4 HP 480V 3Ph Gear Head Operator with Elect. Circuit Board

  • A heavy-duty worm gear industrial operator designed for use on industrial standard high and vertical lift sectional doors or rolling doors and grills.
  • Includes a self-engaging chain hoist for manual operation
  • 25 cycles per hour 80 cycles a day
  • Hoist on right side standard can easily be moved to the left in field
  • Full overload protection
  • BRACKET112 must be used for wall mounting
    • .......more details
Installation ManualSell Sheet
36190T.S

Genie Control Board 3-Terminal

  • Fits the Legacy overhead model and the PMX500 model and is compatible with:
  • 696CD/B
  • Genie PMX/B Model PMX500-IC/B
  • Model 496CD/B
  • GCG & GCG-L Series e.g. GCG350 GCG350L
  • PCG & PCG-L Series e.g. PCG400 PCG450L
    • .......more details
Q029

LiftMaster Limit Switch for Elite Gate Operators (K23-50099)

  • Sold individually
  • For Elite Miracle-One arm SL3000 CSW200 and robo slide and robo swing gate operators.
  • Same as part no. K23-50099
MGS20-Y-2U-04

Miller Edge Sensing Edge Square Yellow 2-Wire Universal Outlet 4ft Long

  • Electromechanical edge for standard 2" round or square frame sliding sing and bi-part gates. •3-sided activation allows for immediate stopping or reversing of motion •Contours to round or square posts. •Temperature range: -30F to 155F •Lead wire: 18 gauge 2ft length •Sensitivity: nominal 6-8 PSI •2 wrie NO configuration •ANSI/UL325 recognized component •Cannot be bent •One year warranty
24-115-1

Relay 8 terminal 115VAC DPDT

  • For most operators with contactor
  • Will work on Liftmaster MH Lynx MCJH and more
RA-HOIST

GDI RA Chain Hoist/Brake 'BCR' N4/Flr Levl Dscnct N4 Field Install

  • Can be added in the field
GH155-L5

LiftMaster Gearhead with Brake 1-1/2 HP 575V 3P L5

  • Gearhead style commercial door operators employ lubricated gears for heavy industrial high cycle applications.
  • GH-style operators include a floor level chain hoist to ease manual operation in an emergency or power outage.
  • Hoist wheel is easily moved to Right or Left hand side of unit eliminating the need to order right or left hand mounting.
  • MyQ Technology enables you to securely monitor and control your facility operator with your smartphone tablet or computer. Internet Gateway 828LM required.
  • Security +2.0 radio receiver safeguards your facility - with every click a new code is sent to the commercial door operator so the door opens only for you.
  • Timer-To-Close: Conveniently and confidently closes the commercial door automatically after a predetermined amount of time has elapsed for added security and peace of mind.
    • .......more details
Installation ManualManuel d'InstallationSell sheetBrochure
4X33PO50

Devanco Loop 4' x 33' pave-over 50' lead-in

  • Ideal for use on with gravel driveways or surfaces that are to be asphalted
  • Features a twisted lead-in to reduce the chances of interference and false detections.
  • Direct burial loops should be buried approximately 6" deep
Installation InstructionsInstructions d'installationSpec SheetBrochureLoop Placement GuideGuide de positionnement des boucles
2200-926

Linear Gear Reducer 60:1 Models SWR SWD

MK-00060

Micanan Timer Plug-In Type 0-10min 24V 8-Pin (MK00481)

Programming InstructionsAdding a timer
271723

Rolling Steel Slide Bolts for Bottom Bar D679

1005-1-1/2-8'

Aluminum Bottom Retainer U-Shaped 8' Long

  • For door thickness 1-1/2"
TRACK-2"-RAW-8

Raw Vertical Track 2" 8'-0" Sold per Piece

756

Fasteners Slotted Track Bolt 1/4-20 x 5/8" 1000/Box *** Temp Unavailable *** Offer 734

  • Knurled shank
  • Max torque = 6
50440

Push Button Station 3-Btn with Pilot Light and Key Switch Off/On Nema 4 / 12

  • Surface Mount
  • Dust-proof EEMAC 12 and 4
DM120

Cable Drum High Lift 120" 5750-120 Pair

  • 120" High Lift aluminum die cast alloy cable drums.
  • 3/8"-16 x 2" hardened cup point set screws installed with red heads.
  • Pair includes: (1) LH and (1) RH. Color coded: Red=LH and Black=RH.
  • Maximum high lift: 120".
  • Maximum door height: 144" + High Lift.
  • Rated lift per drum: 500 lbs.
    • .......more details
.262_2"-LH

Torsion Spring .262 x 2" x 12ft LH Red/Yellow

  • Wire size: .262
  • Inside diameter: 2"
  • Length: 12 ft
38079001

Agri Safety Chain GR 70 3/8" x 69"

  • Min. strength: 20200 lbs
  • Includes hook joiner link & tag
1104-ASFT-10FT

Elton Aluminum Stiffener for 1104 10ft

  • Prevents the 1104 from buckling in the hot sun
111854.0002

Overhead Logic Board for RSX 3/4 & 1 HP 1PH

  • Description: KITPCB1PH3/4-1HPSX/HXUL10
  • For RSX ad RHX models 3/4 & 1 Hp Single phase operators
SOLID_SHAFT_24'

Solid Shaft 1" Keyed 24 ft Galvanized

  • Maximum length for a solid shaft is 24ft
  • Actual length is approx. 24'-1"
.218_2-5/8"-LH

Torsion Spring .218 x 2-5/8" x 12ft LH Yellow/Orange

  • Wire size: .218
  • Inside diameter: 2-5/8"
  • Length: 12 ft
SLT17-22P

Rolling Steel 2" Flat Slat 22-ga Primed

.312_5-1/4"-RH

Torsion Spring .312 x 5-1/4" x 12ft RH Yellow

  • Wire size: .312
  • Inside diameter: 5-1/4"
  • Length: 12 ft
375LMC

LiftMaster Universal 2-btn Transmitter ** USE 380UT

  • Dual frequency universal transmitter
  • Will activate 2 different types of openers (1 on each button)
  • Compatible with major brands except Marantec & Hormann
  • Visor clip and battery CR2032 included
Programming InstructionsInstructions de programmation
T2B-DS

Lynx 2-btn Transmitter Dip Switch 303 MHz

  • Ultra secure mid-size transmitter with 8 dip-switches for coding
  • 2-buttons provides control for 2 Lynx operators
  • Compatible with HomeLink in-vehicle remote control
  • Can be mounted on visor with saddle clip or carried on a keychain
  • Visor clip and 12V battery included
  • Will work with Lynx residential operators built from 2000 and up.
    • .......more details
Compatibility chart
348.000

Whiting Tongue & Groove Bottom Panel Assembly with #77 Lock Made to Order. **Quote Only

  • 15-1/2" x 96" standard size panel.
  • Extra wide panels will carry an additional charge
  • Primer only
PIVIN-BCSI

Special Order BCSI Gate Operator ** Price by Quote Only

27-20301

Truck Door Cable Drum Curbside (RH) for Todco Roll-Up Doors

  • Cast aluminum construction
  • Large die cast cable drums are grooved to prevent cables from binding or wearing prematurely.
  • Angle of cable slot determines left or right drum.
  • Holds up to 130" door cable
  • Cross Reference: T #59033-1 T #59129-1 W #4013 330100
TL-36ML-BLUE

LOCTITE Threadlocker Blue 36ML *** Price by Quote

  • Medium strength
  • This product cures fully in 24 hours and can be dissembled with hand tools.
  • This product is an anaerobic adhesive applied by drops to the threads of fasteners. It then cures to a hard thermoset plastic that locks the threads together.
  • For metal to metal applications only
510.2543.00

Whiting Narrow Mounting Angle for Posts Under 2-1/2" IN

  • This is an upcharge when ordering certain doors