Devanco Canada - Get The Right Garage Door Opener‎ and Parts

072017.0001.S

Overhead Travel Nut for RCH

Teflon travel nut

DF104.2

Whiting Dry Freight Door 3/4" with Track Balancer and Standard Hardware

Standard features include: 2-cable balancer with independent springs
Balancer springs treated with rust preventative
All door hardware is E-coated
Spring loaded lock catch
Heavy-duty 2" 13-gauge track
Stainless steel aircraft cables

.......more details

MHN-SET-100

Magnetic House Number Set 5" Black Embossed 100 pcs

Flexible magnetic material with an embossed finish
100 piece contains ten each of numbers 0-9
Priced per box

MODKIT013A

Manaras Timer to Close Kit 0s-100h Med-Duty

Timer To Close Kit for Manaras Commercial Door Operators with reversing contactor style control box.
Includes Timer base and all required wiring
Detailed installation instructions are included

Installation Manual

EXA-2000

Linear Directional Antenna (AAE00331)

Compatible with all Linear receivers with Type F antenna connector
Receives signals in 288 to 320 MHz range
Directional remote antenna designed to enhance the radio range of Linear receivers
Includes 10 feet of coax
Clamp for mounting
Dimensions: 21” W x 5” H x 1.5” D

.......more details

R5202

Pulley 3" Zinc Plated Steel with Sheave Strap

Bored for 3/8" diameter bolt
Maximum cable diameter: 3/16"
Hardened inner race.

MG00021

Micanan Flat Washer 7/8" ID x 1-1/8" OD

OTH-6112-ECB

Manaras Trolley Operator 1/2HP 120V 1Ph with Electronic Circuit Board

The OTH is a heavy-duty low headroom trolley operator
Designed for use on industrial standard lift sectional doors
25 cycles per hour 80 cycles per day
1/2 HP operators come with # 48 (410) roller chain

Installation Manual Sell Sheet

OSH-6233-CONT-R

Manaras Opera-SH 3/4 HP 208V 3 Ph Contactor Right Hand

An ultra high-end heavy-duty V-belt drive industrial jackshaft operator
For use on Standard High and Vertical Lift sectional doors
Can also be used on Rolling doors and Grilles
Comes with a chain hoist for manual operation and a floor level engaging device
Clearence: side room required 16"
25 cycles per day > 100 cycles per day

.......more details

Installation Manual Sell Sheet

.363-6-R

Cut-to-Length Torsion Spring .362 x 6" Right Hand Wound Green/White

Priced per inch - cones & filler sold seperately
For factory installed cones use part no. C-600-INSTALLED

MOUNTSHAFT010

Manaras Hoist Shaft Kit for MJH (pre-1998)

Drawing

32-34792

LiftMaster Gear Reducer Nema 56C 30:1

Compatible with LiftMaster® Model SL585 Slide Gate Operators
Same as K32-34792

EQ2722

SkyLink 3/4 HP Garage Door Opener with 2 2-Btn Keychain Remotes ** Discontinued

The DC motor offers additional benefits with very quiet operation and much less vibration.
It is ideal for garage doors that are below a living room or bedroom.
The DC motor also offers the soft start soft stop features which reduces the vibration and wear and tear of all the mechanical parts
Features: Rolling Code Technology Soft Start Soft Stop Optimal Force Learnings and Safety Beam Sensors.
Available in either Belt or Chain drive
Includes two 2-btn keychain remotes # MK318-2

.......more details

Installation Manual Sell Sheet

.262-258-R

Cut-to-Length Torsion Spring .262 x 2-5/8" Right Hand Wound Red/Yellow

Priced per inch - cones sold seperately
For factory installed cones use part no. C-258-INSTALLED

9150000621

1/8" Sleeve ONLY 100/pkg

Sleeves only 100 per pack

RDGRNCARD

LiftMaster Warning Device Option Board with Red/Green Light Box

The Red/Green warning light card flashes a warning light for 10 seconds prior to the Timer to Close activating the door to close.
Advanced warning of the door closing helps prevent traffic collisions with the door
Controls both 24V & 110V traffic lights

Installation Manual

MM00011

Micanan Brake Solenoid Cover

RESET012

Manaras Resettable Overload Fuse 15A 1 Phase

CPT-210-K5

Miller Edge Non-Monitored End Plug Kit *** Discontinued

For use with CPT-210-50 bulk extrusion
Kit includes: 5 wired 5 non-wired end-plugs 1oz tube of adhesive

PEDALU4272

Aluminum Pedestal Post Dual Height 42" & 72"

Pedestal post with hood
High quality aluminum
42" & 72"
Dual face-plate allows for easy wire connections

Shop drawing

DL91201

LiftMaster HID PROX 1346 ProxKey III *Discontinued Replaced by LMPK3-ST*

Pocket size key fob
Low cost entry level compatible with HID Prox Readers.

3BXT

Control Station Exterior Surface Mount O/C/S N4 Non-Metallic

Double pole contacts
H=5-3/4" W=2-3/4" D=2-1/2"
UL Listed CSA Approved

1007-1-5/8-12

Aluminum Bottom Retainer Flat Fits Doors 1-5/8 to 1-3/4" Thick

For door thickness of 1-5/8" to 1-3/4"

1007-1-5/8-10

Aluminum Bottom Retainer Flat Fits Doors 1-5/8 to 1-3/4" Thick**Actual Length 10'1"

For door thickness of 1-5/8" to 1-3/4"

7001-WG-8-MO

Residential Wood Grain Side & Top W/S Medium Oak 8' Long - Painted Screws to Match

Medium Oak retainer with Medium Oak vinyl
PVC Wrapped
Steel is Notched on Both Ends for Easier Installation
Economical
Dual Fin Vinyl
Painted Screws to Match

.......more details

7001-WG-16-CO

Residential Wood Grain Side & Top W/S Cherry Oak 16' Long - Painted Screws to Match

Cherry Oak retainer with Cherry Oak vinyl
PVC Wrapped
Steel is Notched on Both Ends for Easier Installation
Economical
Dual Fin Vinyl
Painted Screws to Match

.......more details

7001-WG-10-CO

Residential Wood Grain Side & Top W/S Cherry Oak 10' Long - Painted Screws to Match

Cherry Oak retainer with Cherry Oak vinyl
PVC Wrapped
Steel is Notched on Both Ends for Easier Installation
Economical
Dual Fin Vinyl
Painted Screws to Match

.......more details

39-16759

LiftMaster Clutch Pad for EGJ ***NLA NO SUB

MK-00061

Micanan Time Delay on Reverse 1.5 sec. 24/110V

In closing cycle door will stop for 1.5 seconds and reverse to fully open

BP-BE102BP

Contact Block Base Mount NC Contact

For use with RC P enclosures. IP65

TC134-8

Top Cap 1-3/4" 8 ft Black Box Qty Only ** To extent of Inventory

Sold in box quantities only
12 pieces per box

MK-00005

Micanan Cut-Out Limit Switch

CB18B0500-KOR

Cable 1/8" 7x19 500' Galvanized Supreme

Galvanized Cable 1/8" 7x19 500ft spool.
Cable break strength: 2000 lbs
A higher quality cable compared to the Chinese cable.
Meets endurance test requirements of over 35000 work cycles
Lubricated for flexability and longer service life

Comparison charts

UNI-100-142

Uni-Size Bottom Weather Seal 14'2" Long *To extent of inventory*

Fits most standard doors 1-3/8" thru 2" thick
Pliable in all temperatures
Accepts pneumatic or electrical edge
15 pieces per box

.295-258-L

Cut-to-Length Torsion Spring .295 x 2-5/8" Left Hand Wound Blue

Priced per inch
For factory installed cones priced seperately - use part no. C-258-INSTALLED

G651208R

LiftMaster Replacement Wooden Wishbone Arm 24ft White / Black Stripes. Counterweight NOT incl

Counterweight sold separately part # G658056
Replacement wishbone arm up to 24ft for BG790

K20-1050B-2LP

LiftMaster Electric Motor 1/2 HP 115/230V 1Ph L3 L4

Standard 1/2 hp motor

18-MAG-STRAP

Magnetic Hinge Strap 18" Black Set of 4

Decorative hinge strap only.
Black flexible magnetic material with deep embossed design

LD7LP

LiftMaster 10-30VAC/DC Low Power Loop Detector (50-DSP7LP)

10-30 VAC/DC low power fail-safe loop detector
<2mA stand-by current draw
Compact design - ideal for linear actuator control boxes
Automatic sensitivity and frequency adjustments
Ideal for solar or battery powered gate applications

MV-00024

Micanan 4-Door O/C/S Transmitter CT-4 313 MHz ** Discontinued

Programming Instructions

OVERLOAD002

Manaras Telemecanique Overload 3-ph 1.2 - 1.8A

Telemecanique # LR2K0307

OVERLOAD019

Manaras Telemecanique Overload Base

MD-00030

Roller Chain #40 10' per Pack

Includes (1x) master link

39-10541

LiftMaster Clutch Disc for SL595 (K39-10541)

MA024

LiftMaster Round Aluminum Arm Yellow/Black Stripes 12ft ***NLA Repl. by MA024RDOT

For use on Mega-Arm gate operator
Replacement part MA024RDOT

MAW123-BLK-U

Miller Edge Air-Wave Edge Black Sold per Foot

This pressure sensitive air-wave edge can be adapted to suit a wide variety of applications.
When touch activated the MAW123 sends an immediate pulse of air through the extrusion to an air-wave switch which sends a signal to controls to stop and/or reverse operations.
It has been designed to fit most doors with double track bottom retainers.
With appropriate mounting channel this edge will fit nearly all doors from 11/2" to 2" thick.
The MAW123 is resistant to flame water and most common greases and oils.

HSCFV112

Hinge Full Vision Hinge Clopay Style "B" 12-ga Stainless Steel

Manufactured with Heavy Duty 12ga. Rust-Resistant 304 Stainless Steel
Laser Cut for a Clean Finish
For Use on Clopay Brand Full Vision Products

K001A6426-1

LiftMaster Control Board with Mounting Bracket for LA412

LA400DC-S

LiftMaster Residential 24VDC Linear Actuator Secondary Arm Only New Model

Secondary Arm Only for LA400
All new arms are backwards compatible with the previous model but the LiftMaster branding is different

Installation Manual Manuel d'Installation Sell Sheet

50800P

LiftMaster Treadle Protection Plate **discontinued

4011-12FT

Aluminum Retainer only for Light Brush or Vinyl Insert 12' Long 90 degree

For angle application
For use with Light Brush or Vinyl Insert.
For applications that require dual brush or brush and vinyl

M3A

Safety Inertia Brake 1" Bore 2283 Torque PCM3AP

Provides a bearing to support the shaft and prevent the fall of a door if sudden acceleration occurs.
Ideal for commercial and industrial use; specifically with rolling shutters and balanced and well maintained rolling doors.
Fully resettable and reusable after lockout ocurrs.
Commonly paired with commercial safety bottom brackets in sectional door applications.
Fits 1" shaft
Note: Sectional torsion door systems must be well maintained to ensure desired inertia brake activation.

.......more details

GH4416-04-L

Green Hinge #4 12-ga Left Hand *** to extent of inventory

A unique spring-loaded hinge that allows automatic adjustment of the door.
Provides a close tight seal of the door to the building
Green powder coat finish
For doors up to 20ft

GH4416-02-L

Green Hinge #2 12-ga Left Hand *** No longer available

A unique spring-loaded hinge that allows automatic adjustment of the door.
Provides a close tight seal of the door to the building
Green powder coat finish
For doors up to 20ft

LA400DC

LiftMaster Primary Actuator Arm for Single Gate Applications 12VDC New Version

New version has red stripe but will still work on the old LA400

Installation Manual Manuel d'Installation Sell Sheet

ME123-C3

Miller Edge L-Shaped PVC Mounting Channel Sold by the Foot

2" Wide 1-1/4" High

IG2-P1

Miller Edge Pair of Pedestal Mounts for IG2 Eyes

Flexible spring loaded pedestal stand
30 degree of flex
27" high from bottom base to photoeye

MX00034-460V

Micanan Brake Assembly for PRO-HHD with 460V Solenoid

Complete brake assembly including 460V solenoid
Solenoid cover is sold separately # MM00011

MB-02102

Micanan Electric Motor Only 3/4HP 230/460V 3PH

Base mount motor fits: T TB APT J EJ H EHJ HHD SD

41ASWG-438SA

LiftMaster Motor with Limit Switch Harness for LA400

Electric motor for LA400

9382054125

Square Torsion Spring .343 x 5-1/4 x 41.25" with Cones RHW

41.25" long = 160 coils

27-48-400

Extension Spring 8' Door - 400 lbs Tan

Single - Loop
27" long 48" stretch 400 lb load
Sold individually
Rated for 10000 cycles

Spec Sheet

27-48-320

Extension Spring 8' Door - 320 lbs Green

Single - Loop
27" long 48" stretch 320 lb load
Sold individually
Rated for 10000 cycles

Spec Sheet

27-48-340

Extension Spring 8' Door - 340 lbs Blue

Single - Loop
27" long 48" stretch 340 lb load
Sold individually
Rated for 10000 cycles

Spec Sheet

27-48-300

Extension Spring 8' Door - 300 lbs Tan

Single - Loop
27" long 48" stretch 300 lb load
Sold individually
Rated for 10000 cycles

Spec Sheet

27-48-220

Extension Spring 8' Door - 220 lbs Green with clip

Single - Loop
27" long 48" stretch 220 lb load
Sold individually
Rated for 10000 cycles

Spec Sheet

27-48-260

Extension Spring 8' Door - 260 lbs Brown

Single - Loop
27" long 48" stretch 260 lb load
Sold individually
Rated for 10000 cycles

Spec Sheet

27-48-180

Extension Spring 8' Door - 180 lbs Gold

Loop ends
27" long 48" stretch 180 lb load
Sold individually
Rated for 10000 cycles

Spec Sheet

27-48-150

Extension Spring 8' Door - 150 lbs Red

Single - Loop
27" long 48" stretch 150 lb load
Sold individually
Rated for 10000 cycles

Spec Sheet

502-0022

Reversing Edge BEP 100C Air Tube 4" from End Edge Length 93.5"

H12G06-SS

Hinge #6 x 12 gauge Stainless Steel

Manufactured with 12ga. Rust-Resistant Stainless Steel
Universal Design
Fits Most Overhead Sectional Doors
Priced Per Each

MOTOR255-WIRED

Manaras Electric Motor 3/4HP 120/240V 1PH Wired

Electric motor comes pre-wired for a brake
Must specify if operator has electronic circuit board or if it is hard-wired •This item is compatible with BRAKE011

MOTOR258-WIRED

Manaras Electric Motor TEFC 3/4HP 120/240V 1PH Wired

Electric motor comes pre-wired for a brake
Must specify if operator is equipped with electronic circuit board or if it is hard-wired

MP00019

Micanan Up-Charge Track and #410 (#48) chain for 20' h Door *Actual length 270"*

For 1/3 HP and 1/2 HP operators only

MP00013

Micanan Up-Charge Track and #410 (#48) chain for 14' h Door *Actual length 198"*

For 1/3 HP and 1/2 HP operators only

MP-00024

Micanan Auxiliary Chain Disconnect for Pro-T TB

Allows for operation of a door by an auxiliary chain hoist.
Hoist mechanism is coupled to front end of drawbar
MUST specify door width and position of hoist (left or right)

9003-13FT-BLACK

Commercial Side & Top PVC Weather-Strip Reverse Angle Bolt On 13' Long - Black

Black rigid vinyl retainer with black flexible vinyl insert.
Reverse angle bolt-on vinyl retainer.
Bolts onto reverse angle steel jamb.

Drawing

SL18-ZP-COPPER

Zinc Plated Copper Sleeve 1/8" 100 Sleeves per Pkg *price on request

Oval sleeves ONLY
Stops sold separately part # ST18COP. Stops are not zinc plated

23-10916

LiftMaster Interlock Switch SPDT

Interlock switch for LM commercial door openers with hoist disconnects
15A 125/250VAC

75-10359

LiftMaster Brake Pad

same as K75-10359
For MJ / HMJ and MT / BMT operators

Z9998

Hand Chain 26' for Torque Force Chain Hoists SAE 1008 Zinc Plated

Works with all Torque Force Chain Hoists

K-LA500

LiftMaster Primary Replacement Arm Service Kit for LA500 Original Arm ** DISCONTINUED

Replacement arm only - no stripes old style

MD00009

Micanan Roller Chain #41 45 Pitch Drive with Link

Length: 4 ft

H753L5-LH

LiftMaster Ind. Duty Hoist Op. 3/4 HP 208/230/460V 3P Logic 5 Left Hand

Includes CPS-U
H-style operators include a floor level chain hoist to ease manual operation in an emergency or power outage.
The operators are typically mounted to the wall when used with larger sectional overhead doors with vertical or high lift and mounted to the wall or the front of the hood when used with rolling doors and grilles.
H operators are attached to the door jackshaft to indirectly drive the door. Connectivity
MyQ® Technology enables you to securely monitor and control your facility operator and lights with your smartphone tablet or computer for greater peace of mind.
Alerts can be received as email or pop-up (push) notifications on a mobile device ensuring the status of your commercial door.

.......more details

Installation Manual Manuel d'Installation Sell sheet Brochure

MSWIRE12GA6C

LiftMaster Dual Gate Connecting Kit 40 ft Wire **DISCONTINUED

271723

Rolling Steel Slide Bolts for Bottom Bar D679

E041

Rolling Steel Bottom Bar Astragal 679 Sold per Foot

14JW

Rolling Steel 3" Flat Cast Endlock

Endlocks are riveted to curtain slats ends of every other slat to prevent slats from shifting laterally and to prevent curtain wear in guides.
Continuous endlocks are both ends of every slat.
Rivets included with endlocks

17JW

Rolling Steel 2" Flat Cast Windlock

Windlocks are especially used on rolling steel doors and shutters to prevent "blow-ins" from severe storms or winds.
A wind lock is a small metal device that is attached to each slat.
Its primary function is to reduce the amount of friction that occurs between the actual door & the guiding panel.
When the wind is strong the roller door may be dislodged bent or misaligned from the guide.
With a windlock your door can operate efficiently despite wind load or pressure.
Windlocks are easy to add on to any existing rolling steel or shutter door

.......more details

2JW-D064

Rolling Steel 2" Curved Cast Windlock

Windlocks are especially used on rolling steel doors and shutters to prevent "blow-ins" from severe storms or winds.
A wind lock is a small metal device that is attached to each slat.
Its primary function is to reduce the amount of friction that occurs between the actual door & the guiding panel.
When the wind is strong the roller door may be dislodged bent or misaligned from the guide.
With a windlock your door can operate efficiently despite wind load or pressure.
Windlocks are easy to add on to any existing rolling steel or shutter door

.......more details