Devanco Canada - Get The Right Garage Door Opener‎ and Parts

25-42-300

Extension Spring 7' Door - 300 lbs Tan w/ clip

Double - Loop
25" long 42" stretch 300 lb load
Sold individually
Rated for 10000 cycles

Spec Sheet

25-42-100

Extension Spring 7' Door - 100 lbs Tan

Double - Loop
25" long 42" stretch 100 lb load
Sold individually
Same as part number 111
Rated for 10000 cycles

Spec Sheet

25-42-60

Extension Spring 7' Door - 60 lbs Brown

Double - Loop
25" long 42" stretch 60 lb load
Sold individually
Rated for 10000 cycles

Spec Sheet

94-00105

Truck Door Cotter Pin 3/32" x 1-1/4"

Zinc plated
Cross Reference: T #80401-316 W #10-1009-5 120000

94-00002

Truck Door Clevis Pin 1/4" x 7/8"

Zinc Plated finish
1/4" x 7/8"

28-32081

Truck Door 2" Horizontal Track with 8" Radius 120" Roadside (LH) for Whiting Roll-Up Doors

SPECS: Length: 120" Fits door sizes: Greater than 96" high
Cross Reference: W #11-3
Galvanized steel 14 gauge construction
Tongue and groove for proper alignment at joints
8" radius
For use with 2" diameter steel or nylon rollers

.......more details

26-94522

Truck Door Intermediate Panel (12" x 98") for Whiting Dryfreight

These panels are cut to an extra wide width to fit wider vehicle applications.
Interlocking tongue and groove design for weather-tight joint and proper panel alignment.
3/4" thick 7 ply exterior grade medium density plywood. Primer finish

26-94523

Truck Door Intermediate Panel (13" x 98") for Whiting Dryfreight

These panels are cut to an extra wide width to fit wider vehicle applications.
Interlocking tongue and groove design for weather-tight joint and proper panel alignment.
3/4" thick 7 ply exterior grade medium density plywood. Primer finish

26-40037

Truck Door Offset U-Channel Seal Retainer 96" Long for Whiting DryFreight Doors *** To extent of inventory

Aluminum extrusion construction.
Retainer is offset to allow header clearence with seal when door is in open position.
For use with offset bottom seal #26-40040
Cross Reference: W #8280

HD3076

Lift Handle Roll Grip Round Zinc Plated 5-1/2"-5-3/4"

Measures 7" from end to end
Measures 5.5" from eyelet to eyelet

26-14325

Truck Door Bottom Panel with Seal (15" x 98") for Todco DryFreight Doors

These panels are cut to an extra wide width to fit wider vehicle applications.
Interlocking tongue and groove design for weather-tight joint and proper panel alignment.
3/4" thick 7 ply exterior grade medium density plywood. Primer finish
Comes only with bottom retainer and seal (installed)

HD8460-138

T-Handle Cable Lock System 1-3/8" ***Use HD8460-200 instead***

Complete cable locking system for 1-3/8" door.
System Includes: Auto Latch Striker Keeper T-Handle keyed with 4" shaft Inside Release Handle 3/32" cable and all required hardware.

H11G12

Hinge #12 x 11 gauge

11 gauge # 12 hinge - 1.00 lbs
Bright zinc-plated steel construction
For use with 7/16" stem rollers

CBA18B08

Cable Assembly 1/8" 7x19 114" Sold per Pair

Galvanized cable assembly for 8ft door (114" = 9'-6")
Aircraft cable made of 19 wires per strand and 7 strands per cable
Sold as a pair
Same as part number 458

CBA18A08

Cable Assembly 1/8" 7x7 114" Sold per Pair

Galvanized cable assembly for a 8ft door (114" = 9'-6")
Sold as a pair

25-10250

Truck Door Bottom Fixture for Todco Roll-Up Doors

Steel construction Zinc plated finish
Cross Reference: T #69249 T #61352 W #4003 230000

99553NYHNG

Nylon Hinge Black #3 *** To extent of inventory

Equivalent to 14-ga in strenght

7001-8-BLACK

Commercial Side & Top Weather-Strip 8' Long - Black (Code B)

Black galvanized steel with black dual fin vinyl.
Commercial and Residential use.
Steel is notched on both ends for easier installation.

PRO-APT-7523-U

Micanan 3/4HP 230V 3P Apartment Trolley Operator N1 Eyes Monitored ECB (PRO APTE)

Low clearance design for APT applications (9.5")
Door speed: 12" per second
Monitored board

PRO-H-7511U-LH

Micanan 3/4HP 115V 1P Hoist Operator N1 Eyes Monitored ECB Left Hand

Continuous duty belt drive jackshaft operator with emergency chain hoist
Full function Smart 10.0 Logic control board featuring on-board receiver with antenna
Nema 1 photoeyes included
Solenoid brake OPTIONAL

Installation manual Specification sheet

RW-PANEL

Richards Wilcox Replacement Door Panel Special Order

As per customer's requirements

.295-334-L-C

Cut-to-Length Torsion Spring .295 x 3-3/4" Left Hand Wound Coated ** Price by Quote Only

Priced per inch
For factory installed cones priced seperately - use part no. C-375-INSTALLED

LB810-24

Laminated Bumper Standard Black 10" x 24" 8" Projection Horizontal Installation

For use in low to medium traffic loading docks in factories and warehouses.
Can be used as rub rails at the sides of truck wells
Fabric reinforced rubber pads cut from recycled truck tires.
Rubber pads laminated between steel angles and secured with 3/4” rods
Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
Wall mounting hole size is 7/8” diameter.

.......more details

28-00114

Truck Door 1" Std Vert. Track and Angle Assbly J Style Roadside (LH) 120" Todco Style

For Todco style doors
Galvanized steel 14-gauge construction
Includes J-style channel mounting angle with track and operator bracket
Fits door sizes 101 - 114" high
Cross ref: T #49014-2 T #41034-2 & W #4045

.283-134-R-C

Cut-to-Length Torsion Spring .283 x 1-3/4" Right Hand Wound Coated ** Price by Quote Only

Priced per inch - cones sold seperately
For factory installed cones use part no. C-134-INSTALLED

PRO-T-5081-U

Micanan 1/2HP 208V 1P Trolley Operator N1 Eyes Monitored ECB

Designed for use on commercial / industrial sectional overhead doors with standard lift tracks.
#410 roller chain on 1/2 HP models
Monitored board
On-Board receiver holds up to 20 transmitters

041-0189-000

LiftMaster Dual Light Pod Kit No Camera Model

Dual Light Pod Replacement Kit
For use with various LiftMaster® Belt Drive and Chain Drive Garage Door Openers featuring myQ® technology dual light lenses and are not equipped with a video camera; manufactured after 2021 only
This replacement kit is compatible with the following models: 84501 84501-267 84602

111-0061

RW Box Track #33 Black 10ft

Finish: Black enamel

PRO-GT-15043-U

Micanan 1-1/2HP 460V 3P Worm Gear Trolley Operator N1 Eyes Monitored ECB

On-Board receiver holds up to 20 transmitters

GD-STEND-18D

End Cap Steel 18G 18" Double 1-3/4"

K23-30716

LiftMaster Stop Switch 120VAC 6A

Same as 20-30716

PRO-GH-7511U-R

Micanan 3/4HP 115V 1P Gearhead Operator N1 Eyes Monitored ECB Right Hand

Includes 3-btn O/C/S control station Nema 1
External radio control terminal strip
Heavy duty worm gear reduction in oil bath gearbox
Solenoid brake standard
#50 roller chain and sprockets on final drive
Emergency chain hoist with electrical cut-out switch for manual operation

.......more details

Installation manual Specification sheet

41D0216-2

LiftMaster End Panel with Light Socket

Compatible with LiftMaster® 8550WL & 8360WL Models; and various garage door openers manufactured after 2017 only
Circuit board not included

H11G08-SS

Hinge #8 x 11 gauge Stainless Steel

Manufactured with 11ga. Rust-Resistant 304 Stainless Steel
Universal Design
Fits Most Overhead Sectional Doors
Priced Per Each

2376.156.19.780

Whiting Torsion assembly .156 wire size 19" spring length 78" shaft

K71-D575-1

LiftMaster Drum Brake Kit 3 Ph 575V (Late Model Logic 5 Shoe and Drum Models)

Internal Solenoid Drum Brake with Cable Replacement Kit.
Compatible with LiftMaster® Logic 5.0 Model T SD J H and HJ Industrial-Duty Operators.
Complete service kit includes: Solenoid Cover Brake Solenoid Brake Drum Cable Mounting Plate and Installation Hardware.
Quiet preferred sound profile
Industry benchmark stopping performance with adjustability
Significantly reduced modes of failure

.......more details

Installation manual Manuel d'installation

1014-1-5/8-14'

Rigid Vinyl Bottom Retainer Notched 14' Long

Black - for door thickness of 1-5/8"

9372054125

Square Torsion Spring .343 x 5-1/4 x 41.25" with Cones LHW

41.25" long = 160 coils

.343_5-1/4"-RH

Torsion Spring .343 x 5-1/4" x 12ft RH Blue/Red

Wire size: .343
Inside diameter: 5-1/4"
Length: 12 ft

CH755L5-RH

LiftMaster Hoist Op. with Carwash Mod. 3/4 HP 575 VAC 3 Ph Logic 5 Right Hand ***Replaced by CRBH755L5-RH

Industrial Duty Hoist Operator with Damp Environment modification.
Comes with CPS-UN4 photoeyes

Installation Manual Manuel d'Installation Sell sheet Brochure

CB18A0500

Cable 1/8" 7x7 500' Galvanized

Galvanized cable 1/8" 7x7 500ft spool.

Comparison charts

1005-1-3/8-24'

Aluminum Bottom Retainer U-Shaped 24' Long *** 24' is DISC

For door thickness 1-3/8"

1019-1-3/8-24'

Rigid Vinyl Bottom Retainer Flat 24' Long

Black - for door thickness of 1-3/8"

MOUNTSHAFT007

Manaras Clutch Shaft Kit for MTBH with 5/8" Shaft

For operators made with a 5/8" shaft
For very old model MTBH built with 1" shaft - use part number MOUNTSHAFT017

Drawing

.393-6-L

Cut-to-Length Torsion Spring .393 x 6" Left Hand Wound Orange

Priced per inch - cones & filler sold seperately
For factory installed cones use part no. C-600-INSTALLED

.312-5-1/4-LH-C

Torsion Spring .312 x 5-1/4" x 144" LH Coated ** Price by Quote Only

Black Oxide coating
Wire size painted on spring
Wire size: .312 ID: 5-1/4" Length: 12 ft

1006-1-3/4-14'

Rigid Vinyl Bottom Retainer U-Shaped 14' Long

Black with flexible fin to touch door face.
For door thickness 1-3/4"

MF00045

Micanan H.H Slotted Self Rounding Washer Head Screw 8-32UNF x 3/8"

6X15SC50

Devanco Loop 6' x 15' saw-cut 50' lead-in

Manufactured to the highest quality standards to ensure accurate detection our Pre-formed loops come with a 50 foot twisted lead-in ware and available lead-in lengths up to 500 feet.
Ideal for use on existing asphalt or concrete surfaces
Features a non spliced continuous wire throughout loop turns and lead-in.
requires the use of loop sealer when being installed to ensure long lasting trouble-free detection

Installation Instructions Instructions d'installation Loop Placement Guide Guide de positionnement des boucles

LB812-18

Laminated Bumper Standard Black 12" x 18" 8" Projection Horizontal Installation

For use in low to medium traffic loading docks in factories and warehouses.
Can be used as rub rails at the sides of truck wells
Fabric reinforced rubber pads cut from recycled truck tires.
Rubber pads laminated between steel angles and secured with 3/4” rods
Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
Wall mounting hole size is 7/8” diameter.

.......more details

B

Molded Rubber Bumper Black 24" L x 12" W 3" Projection 4-Hole 2 Reflectors Sold Individually

Manufactured from reinforced prime rubber
Rectangular horizontal mount
Ideal for light traffic loading docks.
Molded bumpers are molded in one piece and will not warp rust rot or harden.
Perfect protection for in-plant wall protection from forklifts and other material handling vehicles.
Bumper comes with 6 pre-drilled countersunk mounting holes drilled to accept 3/4" anchor bolts

.......more details

K001A3200-2

LiftMaster Gate Receiver Isolation Kit

Isolates the 850LM receiver from the ground loop and prevent the fuse from blowing.

.225-2-5/8-LH-C

Torsion Spring .225 x 2-5/8" x 144" LH Coated ** Price by Quote Only

Black Oxide coating
Wire size painted on spring
Wire size: .225 ID: 2-5/8" Length: 12 ft

6X20SC50

Devanco Loop 6' x 20' Saw-cut 50' lead-in

Manufactured to the highest quality standards to ensure accurate detection our Pre-formed loops come with a 50 foot twisted lead-in ware and available lead-in lengths up to 500 feet.
Ideal for use on existing asphalt or concrete surfaces
Features a non spliced continuous wire throughout loop turns and lead-in.
Requires the use of loop sealer when being installed to ensure long lasting trouble-free detection

Installation Instructions Instructions d'installation Loop Placement Guide Guide de positionnement des boucles

180210

Decorative Pull Handle Aspen-V3 Style 10-1/4" Stamped Steel Sold per piece

As seem on carriage house doors

HSC-600-JAWS

Replacement Jaws for Hand Swager

Can be used as replacement jaws for both the HSC-600 hand model and the HSC-600-B bench model

218014-02

Lamp Socket Assembly

For models LSO LCO LDO

32-48-100

Extension Spring 8' Door - 100 lbs Tan ** Replaced by 27-48-100

Double - Loop
32" long 48" stretch 100 lb load
Springs sold individually

Spec Sheet

.393-334-L-C

Cut-to-Length Torsion Spring .393 x 3-3/4" Left Hand Wound Coated ** Price by Quote Only

Priced per inch - cones & filler sold seperately
For factory installed cones use part no. C-375-INSTALLED

.343-334-L

Cut-to-Length Torsion Spring .343 x 3-3/4" Left Hand Wound Blue/Red

Priced per inch - cones sold seperately
For factory installed cones use part no. C-375-INSTALLED

9003-17FT-BLACK

Commercial Side & Top PVC Weather-Strip Reverse Angle 3" Track Bolt On 17' Long - Black

Black rigid vinyl retainer with black flexible vinyl insert.
Reverse angle bolt-on vinyl retainer.
Bolts onto reverse angle steel jamb.

Drawing

706111011

Rolling Steel 800 Series Guide Channel Sold per Foot

Assemblies of strucural steel angles bolted to the wall supporting the entire weight of the door.

OPJ-6233-M-N1

Manaras Heavy-Duty Jackshaft Operator 3/4 HP 208V 3 Ph Monitored ECB w/N1 Photoeyes

An industrial operator designed for use on standard high and vertical lift sectional doors
Can also be used on rolling doors and grills
It incorporates a floor level disconnect mechanism for manual operation
25 cycles per hour 100 cycles per day
Continuous-duty single phase capacitor start or 3 phase motor open drip proof
Mechanical brake

.......more details

PRO-GT-15021-U

Micanan 1-1/2HP 230V 1P Worm Gear Trolley Operator N1 Eyes Monitored ECB

On-Board receiver holds up to 20 transmitters

.421_6"-RH

Torsion Spring .421 x 6" x 12ft RH Gold

Wire size: .421
Inside diameter: 6"
Length: 12 ft

OSHW-6533-0M00

Manaras Opera-SH w/Carwash Mod 3/4HP 575V 3Ph Mon ECB w/N4 Photoeyes Right Hand

A heavy-duty V-belt drive industrial jackshaft operator with Damp Area Modification
For use on Standard High and Vertical Lift sectional doors
Can also be used on Rolling doors and Grilles
Comes with a chain hoist for manual operation and a floor level engaging device
Clearence: side room required 16"
Solenoid activated Brake

.......more details

CPT215-END-KIT-U

Miller Edge Universal End Kit for CPT215/223

Kit contains: 2) Caps (2) cages (1) wired plug (1) 10K plug (1) 8.2K plug (1) diode capacitor plug (1) non-mon. plug end plug (2) screws
This end cap will also work on the CPT223 extrusion

1222_DUAL_TROLLEY_20'

LiftMaster Additional Trolley kit for TDC operators for 20' high door includes #41 Chain for 20ft High Door Angle tracks (2x) 20' (Actual length 275") and (1x) shaft

Provides a second drawbar-type operation on wide standard door
Includes 20ft tracks #41 chain hardware & Round Bar 1" x 12'
Works with TDC12 & TDC22 Maxum operators

ME120-Y-2WIRE-R

Miller Edge Yellow 2-Wire NM Right Hand Outlet Sold per Foot

Electromechanical slide in edge with a small profile for motorized gates and doors rolling shutters and pinch point protection applications.
Touch sensitive signaling
Temperature range: -30F to 155F
Lead wire: 18 gauge 2ft length
Sensitivity: nominal 4 PSI
2 wire NO configuration

.......more details

ME120-Y-2WIRE-L

Miller Edge Yellow 2-Wire NM Left Hand Outlet Sold per Foot

Electromechanical slide in edge with a small profile for motorized gates and doors rolling shutters and pinch point protection applications.
Touch sensitive signaling
Temperature range: -30F to 155F
Lead wire: 18 gauge 2ft length
Sensitivity: nominal 4 PSI
2 wire NO configuration

.......more details

MYQ-C43ACXW

LiftMaster MYQ Outdoor Wired Camera Weather resistant Motion detection & 2-way talk

4-hour Proactive Security: Automatically locks & closes compatible doors and garages when it detects a person during pre-scheduled times ensuring your home is always secure. Video plan monitoring required. Complete Visibility: Capture every detail with 1080p full HD video featuring a 130º wide-angle lens and a 360º adjustable swivel lens for comprehensive coverage plus two-way communication for remote interaction. Vivid Night Vision: Enjoy color night vision for crystal-clear 24/7 image quality regardless of time of day. All Weather Reliability: Built to withstand the elements with reliable long-lasting performance rated to operate in temperatures from -4ºF to 122ºF. Quick and Easy Setup: Get set up in no time with integrated Bluetooth a fully adjustable mount and 25-foot power cord. Premium Smart Features: With smart detection features receive intelligent alerts that quickly show what triggered the camera and when. Record and save events for up to 30 days.

RXTA-100

Pulse 2-Channel Receiver

Two-Channel Receiver: Can be programmed to operate one or two doors or for Open/Close or Open/Stop functions.
Universally Adaptable: Works with most available brands/models of transmitters (300-390MHz) including those with rolling code.
9-30Vac/dc input.
FCC approved.

1104-16FT-DK-SAND

Residential Side & Top PVC Weather-Strip with cap 16' Long - Dark Sandstone (DDG)

Sandstone rigid vinyl retainer with dark sandstone flexible vinyl seal.
Dual fin vinyl.
Comes with cap to hide screws.
Also known as Taupe

OTBH-6533-AM05

Manaras Trolley Operator 3/4 HP 600V 3Ph Monitored Board w/N4 Eyes Apt. Model

The Silencio model is a low headroom apartment type operator designed for use on industrial standard lift sectional doors with high daily use requirements
100 cycles per day
It incorporates a drum-shoe type solenoid brake.
Tracks are an extra 36 lbs per track
#41 full roller chain
Includes monitored N4X eyes (PHOTO 061)

.......more details

K07-8003

LiftMaster lower Crank Link BG770/790 Barrier Gate

For use with BG770/790 barrier gate operator

2807.182*290

Whiting Spring Assby .182 x 2-3/16 x 29" Curbside

Replacement torsion spring with cones
Specs: .182 x 2-3/16" x 29" Long
Roadside
For Roadside order part # 2807.182*290

CYL-3BXLT

Replacement Cylinder Only for 3BXLT Comes with 2 Keys

PRO-HBH-10083U-R

Micanan 1 HP 208V 3P Heavy-Duty Jackshaft N1 Eyes Monitored ECB Right Hand

1 HP208V 3 PH Industrial Continuous Duty Jackshaft Operator Ideal for Sectional Doors Rolling Steel
Monitored logic board with integral 372Mhz radio receiver that can hold up to 20 transmitters (MK-00647/ MK-00653/ MK-00659) or 200 of the 1 channel hand held transmitters (MK-00660).
N-1 Through-beam (MK-00649) photocells included. Other options available.
3-btn o/s/c (02-103) wall control station included
Adjustable Friction Clutch 5L320 drive belt
#50 Roller chain 18 tooth door sprocket included

.......more details

40629A.S

Genie Wire Harness for Door Lock

Includes 1 wiring harness only
Connects to the door lock for Genie Wall Mount garage door openers Overall length 10'
Compatible with models 6070H 6070H-B 6072H-BO 6072H-O 6170H 6170H-B 6172H-BO 6172H-BSV 6172H-BV 6172H-O

MX000641

HySecurity Left Counterweight Mount for StrongArm

Compatible with StrongArm systems
Designed for left-hand configurations
Supports balanced gate movement
Reduces strain on gate operators

R4AES

Erone Radium 4-Button AES128 Encrypted Remote

Compatible with any high-security AES128 wireless receivers they were designed to prevent the cloning of remotes
The code sent by the remote changes at each activation removing any scanning and copying risk.
A special algorithm ensures a continuous synchronization between the receiver and transmitter
Includes AES128 encryption
Compatible with RADIUM AES128 receivers
Range up to 820 ft (250 m)

.......more details

K20-1050C-2LP-H26

LiftMaster Electric Motor 1/2 HP 115V 1Ph Logic 5

Also known as: K20-1050C-2LP-H24
1/2HP Motor Replacement Kit (115/230V 1PH L5).
For use with various LiftMaster® 1-Phase Logic 5.0 Commercial Door Operators and Commercial Access Systems

111-0060

RW Box Track #33 Black 8ft Up to 700lbs

Finish: Black enamel

2807.192.290

Whiting .192 x 2-3/16 x 29" Curbside with Cones

C715477300K-1.25

Governor 1.25" Bore 1/4" KW

2200-367

Linear Chain Tension (Light) Spring

Used on various Linear Gate operators

050DCRJB3MC

LiftMaster Receiver Logic Board DC. WiFi HD RJO

Security+ 2.0 Receiver Logic Board Replacement Kit
For use with the LiftMaster® 98032 Heavy Duty Residential Jackshaft DC Wi-Fi® Garage Door Operator; powered by myQ® and manufactured 2024 to present
The unit will feature a yellow circle learn button

GALV-319-6-144-L

Torsion Spring .319 x 6" x 12ft LH Galvanized Blue/Green

Wire size: .319
Inside diameter: 6"
Length: 12 ft

2806.200.280

Whiting .200 x 2-3/16 x 28" Roadside with Cones

2376.206.35.940

Whiting Torsion assembly .206 wire size 35" spring length 94" shaft

MGH-6215-M-N1-RH

Manaras 1.5 HP 240V 1P Jackshaft Monitored w/N1 Eyes Right Hand

A very heavy-duty worm gear industrial operator designed for use on Industrial standard high and vertical lift sectional or rolling doors and grilles.
It incorporates a chain hoist for manual operation with a floor level engaging device with electrical cut-out
Electrically activated drum-band type solenoid brake
Full overload protection

5423.105

Whiting Side Seal 105" 5/16" Track Spacing

Quote required prior to sale to ensure correct fit

CP-SP-ARM-REL

Lynx Barlock Spring

K41-0240-000

LiftMaster Idler Sprocket Qty 2 IHSL24UL

41-0240-000 is a Idler Sprocket Service Kit. Compatible with LiftMaster® IHSL24UL Series Industrial Heavy Duty Slide Gate Operators. Complete kit includes: (2) Idler Sprockets. Check the installation manual or replacement parts diagram for specific part information before ordering to ensure compatibility.