Devanco Canada - Get The Right Garage Door Opener‎ and Parts

PRO-TB-5011-R

Micanan 1/2HP 115V 1P Trolley Operator with Brake - Contactor

Designed for use on commercial / industrial sectional overhead doors with standard lift tracks.
#410 roller chain on 1/2 HP models

95LMC

LiftMaster Keyless Entry Transformer

2-wire hook up
110VAC Input 22 VDC 2-Wire Connection

ME00057-COMPLET

Micanan Clutch Shaft Complete for PRO-APT (SCLUTCHSHAFT) MX00213

For model PRO-APT

MI00007

Micanan Front Idler Assembly for PRO-APT/T

For model PRO-APT / T
3/4" x 5.79" LG

27-20004

Truck Door Dual-Spring Shaft 93" for Whiting Roll-Up Doors

Constructed of 1" outside diameter heavy-duty steel tubing
Holes drilled in one end only for cotter pins the other end is not drilled for flexibility
Cross Reference: W #2528

34299R

Genie Deluxe Wall Console Series II ** Discontinued Replaced by 39165R

Deluxe Wall Console for Genie Intellicode Series II only
3 function console: operates door opener controls lights and security lock out switch
Compatible with Code Dodger
Same as previous part number: GPWC-2WLB

26-14325

Truck Door Bottom Panel with Seal (15" x 98") for Todco DryFreight Doors

These panels are cut to an extra wide width to fit wider vehicle applications.
Interlocking tongue and groove design for weather-tight joint and proper panel alignment.
3/4" thick 7 ply exterior grade medium density plywood. Primer finish
Comes only with bottom retainer and seal (installed)

26-94321

Truck Door Bottom Panel with Seal (11" x 98") for Whiting Dryfreight

These panels are cut to an extra wide width to fit wider vehicle applications.
Interlocking tongue and groove design for weather-tight joint and proper panel alignment.
These panels have no routs and shipped without holes.
3/4" thick 7 ply exterior grade medium density plywood. Primer Finish
Comes only with bottom retainer and seal (installed)

.218-2-L

Cut-to-Length Torsion Spring .218 x 2" Left Hand Wound Yellow/Orange

Priced per inch - cones sold seperately
For factory installed cones use part no. C-200-INSTALLED

.273-134-L

Cut-to-Length Torsion Spring .273 x 1-3/4" Left Hand Wound Orange/Red

Priced per inch - cones sold seperately
For factory installed cones use part no. C-134-INSTALLED

.234-134-R

Cut-to-Length Torsion Spring .234 x 1-3/4" Right Hand Wound Blue/White

Priced per inch - cones sold seperately
For factory installed cones use part no. C-134-INSTALLED

.218-134-L

Cut-to-Length Torsion Spring .218 x 1-3/4" Left Hand Wound Yellow/Orange

Priced per inch - cones sold seperately
For factory installed cones use part no. C-134-INSTALLED

.283-258-R

Cut-to-Length Torsion Spring .283 x 2-5/8" Right Hand Wound White

Priced per inch
For factory installed cones priced seperately - use part no. C-258-INSTALLED

2806.139*140

Whiting Spring Assby .139 x 2-3/16 x 14" L Roadside

Replacement torsion spring with cones for Whiting Door Serial # 138631
Specs: .139 x 2-3/16" x 14" Long
Roadside
For Curbside order part # 2807.139.140

14FT-I-BEAM

LiftMaster 14' I-Beam Rail 3714RV / CD1014

I-Beam Chain Drive Rail for model 3595

355LMC

LiftMaster Universal Radio Control Receiver 315 MHz **NLA

Over 100 billion possible codes makes it impossible to duplicate the frequency
Jumper option for momentary or constant relay contact
Specifically for use with most 3-wire systems without a transformer
Accepts up to 8 Security+ remote control codes and one keyless entry
Will work with LiftMaster Sears Craftsman or Chamberlain remotes with the purple learn button (ERT format)
Will work on 2 or 3 wire systems. If your system is 2-wire a 24-volt 85LM transformer is required

.......more details

Programming Instructions Instructions de programmation

ME113-C3

Miller Edge PVC Mounting Channel "L" Shape Sold by the Foot

.319_6"-LH

Torsion Spring .319 x 6" x 12ft LH Blue/Green

Wire size: .319
Inside diameter: 6"
Length: 12 ft

.319_3-3/4"-LH

Torsion Spring .319 x 3-3/4" x 12ft LH Blue/Green

Wire size: .319
Inside diameter: 3-3/4"
Length: 12 ft

.243_3-3/4"-LH

Torsion Spring .243 x 3-3/4" x 12ft LH White/Yellow

Wire size: .243
Inside diameter: 3-3/4"
Length: 12 ft

.331_2-5/8"-LH

Torsion Spring .331 x 2-5/8" x 12ft LH Red/White

Wire size: .331
Inside diameter: 2-5/8"
Length: 12 ft

.273_2-5/8"-LH

Torsion Spring .273 x 2-5/8" x 12ft LH Orange/Red

Wire size: .273
Inside diameter: 2-5/8"
Length: 12 ft

.250_2-5/8"-LH

Torsion Spring .250 x 2-5/8" x 12ft LH Green

Wire size: .250
Inside diameter: 2-5/8"
Length: 12 ft

.234_2-5/8"-LH

Torsion Spring .234 x 2-5/8" x 12ft LH Blue/White

Wire size: .234
Inside diameter: 2-5/8"
Length: 12 ft

.225_2"-LH

Torsion Spring .225 x 2" x 12ft LH Orange/Green

Wire size: .225
Inside diameter: 2"
Length: 12 ft

.295_1-3/4"-LH

Torsion Spring .295 x 1-3/4" x 12ft LH Blue

Wire size: .295
Inside diameter: 1-3/4"
Length: 12 ft

.262_1-3/4"-LH

Torsion Spring .262 x 1-3/4" x 12ft LH Red/Yellow

Wire size: .262
Inside diameter: 1-3/4"
Length: 12 ft

.225_1-3/4"-LH

Torsion Spring .225 x 1-3/4" x 12ft LH Orange/Green

Wire size: .225
Inside diameter: 1-3/4"
Length: 12 ft

LSGUN

Loop Sealant Gun for Quart Sized (32oz) Tubes

Caulking gun for LSBLK / LSGRY

71-B575H

LiftMaster Interior Brake Kit with Cable 575V (Logic 3 4 and early 5 Disc and Pad Models)

Interior mount brake kit for operation with chain hoist
Includes solenoid

Instruction Manual

24-24-1

LiftMaster Relay 24VAC 8-Pin DPDT Flange

T-53-S

FL-Allstar 3-btn 27-Door O/C/S Transmitter 107475-311 MHz ***NLA

This remote can control (open-close-stop) up to 27 doors.
It has a eight switches encoder with three positions: + 0 and - .
Manufacturer's model number: 535T (190-107475)
Dimensions: 6 1/4" x 3 3/8" x 1 3/8"

Programming Instructions

CAM005

Manaras Limit Cam 5/8-18 UNF

Limit cam for Mountshaft009
2 cam's required per shaft

.468_6"-RH

Torsion Spring .468 x 6" x 12ft RH Blue/Orange **NLA

Wire size: .468
Inside diameter: 6"
Length: 12 ft

.295_6"-RH

Torsion Spring .295 x 6" x 12ft RH Blue

Wire size: .295
Inside diameter: 6"
Length: 12 ft

.468_5-1/4"-RH

Torsion Spring .468 x 5-1/4" x 12ft RH Blue/Orange. **NLA

Wire size: .468
Inside diameter: 5-1/4"
Length: 12 ft

.375_5-1/4"-RH

Torsion Spring .375 x 5-1/4" x 12ft RH Yellow/Green

Wire size: .375
Inside diameter: 5-1/4"
Length: 12 ft

.312_5-1/4"-RH

Torsion Spring .312 x 5-1/4" x 12ft RH Yellow

Wire size: .312
Inside diameter: 5-1/4"
Length: 12 ft

.306_5-1/4"-RH

Torsion Spring .306 x 5-1/4" x 12ft RH Red

Wire size: .306
Inside diameter: 5-1/4"
Length: 12 ft

.319_2-5/8"-RH

Torsion Spring .319 x 2-5/8" x 12ft RH Blue/Green

Wire size: .319
Inside diameter: 2-5/8"
Length: 12 ft

.331_2-5/8"-RH

Torsion Spring .331 x 2-5/8" x 12ft RH Red/White

Wire size: .331
Inside diameter: 2-5/8"
Length: 12 ft

.295_2-5/8"-RH

Torsion Spring .295 x 2-5/8" x 12ft RH Blue

Wire size: .295
Inside diameter: 2-5/8"
Length: 12 ft

.306_2"-RH

Torsion Spring .306 x 2" x 12ft RH Red

Wire size: .306
Inside diameter: 2"
Length: 12 ft

.295_2"-RH

Torsion Spring .295 x 2" x 12ft RH Blue

Wire size: .295
Inside diameter: 2"
Length: 12 ft

.250_2"-RH

Torsion Spring .250 x 2" x 12ft RH Green

Wire size: .250
Inside diameter: 2"
Length: 12 ft

T3B-DS

Lynx 3-btn Transmitter Dip Switch 303 MHz

Ultra secure mid-size transmitter with 8 dip-switches for coding
3-buttons provides control for 3 Lynx operators
Compatible with HomeLink in-vehicle remote control
Can be mounted on visor with saddle clip or carried on a keychain
Visor clip and 12V battery included
Will work with Lynx residential operators built from 2000 and up.

.......more details

Compatibility chart

H14G05

Hinge #5 x 14 gauge

Bright zinc plated 14-gauge steel hinge
For use with 7/16" diameter stem rollers
Full body hinge 2-3/4" wide
#5 position
Use between sections 5 and 6
Same as part number 245

.......more details

H14G03

Hinge #3 x 14 gauge

Bright zinc plated 14-gauge steel hinge
For use with 7/16" diameter stem rollers
Full body hinge 2-3/4" wide
#3 position
Use between sections 3 and 4
Same as part number 243

.......more details

MOUNTSHAFT001

Manaras Clutch Shaft Kit for MJH (pre-1998)

Input / clutch shaft kit for MJH models up to mid-1998
Kit includes V-belt 4L360 to fit with newer deeper pulley
For MJH built after 1999 use MOUNTSHAFT001A

Drawing

MOUNTSHAFT001A

Manaras Clutch Shaft Kit for MJH

Input / clutch shaft kit for MJH built after 1999

Drawing

LIMIT006

Manaras Single Micro Limit Switch with Flat Lever

Fits old medium-duty Manaras operators such as MDJ
SPDT - Cherry

Limit Switch Chart

DRUM006

Manaras Steel Brake Drum Flat Track - replaces DRUM001

Replaces DRUM001
Brake drum for all operators except Gear Head models prior to 1999.
Use with BRAKEPART018

RADIO-16

Manaras MT2-1000 2-btn transmitter 313 MHz****Replaced by RADIO-EM903

Open/Close remote for 2 doors
Comes with LED battery life indicator
9V battery included
Sunvisor clip included

Programming Instructions

2376.192_31.930

Whiting Torsion assembly .192 wire size 31" spring length 93" shaft

This is a full balancer assembly
Twin springs one road one curb with a shaft through it

2235.096

Whiting Coldsaver Bottom Panel 14-1/2" x 96" with seal and retainer

Fits Coldsaver Roll-Up Doors
1-1/8" thick 96" wide

DRQP

Linear 1-Channel Delta3 Gate Receiver 310 MHz *** No Longer Available

1-Channel Gate Receiver
High-sensitivity short-range radio receiver
Operates in conjunction with the 9-inch local antenna (supplied).
Designed for use with automatic gate operators or systems where a remote antenna is needed.
Same as: DNR00013P

Installation Manual

MDR

Linear 1-Channel MegaCode Receiver 318 MHz *** Discontinued

Activates one device
Wire lead antenna
Mounting bracket supplied
Memory: storage for up to 10 MegaCode transmitters
Power: 24 VAC/VDC
Codes: 1000000+ (MegaCode format)

.......more details

Programming Instructions

41A2816

Jobber Drive Gear for Chamberlain Sears LiftMaster residential operators

Drive gear for Chamberlain / LiftMaster / Sears residential garage door openers built 1984 +
This is an excellent quality aftermarket product

220499

Linear Drive Sprocket - Belt (HBT)

218014-02

Lamp Socket Assembly

For models LSO LCO LDO

1920.1

Whiting Stainless Steel Top Closure Mounting Plate for Insulated Doors

RV-200

2" Vinyl Insert for Brush Retainer per foot

Color: Black

4008-12FT

Aluminum Retainer only for Light Brush 12' Long 180 degree 5/8" Offset *** To Extent of Inventory

2" Offset
For use with Light Brush or Vinyl Insert

4007-16FT

Aluminum Retainer only for Light Brush***Actual Length 16'2" 90 degree

For angle application
For use with Light Brush or Vinyl Insert.
die # A-25060

1003-5"-YELLOW

Bottom U-Rubber 5" Yellow 150' Long

5" yellow vinyl insert 150ft spool.

1019-1-3/8-24'

Rigid Vinyl Bottom Retainer Flat 24' Long

Black - for door thickness of 1-3/8"

1006-2-24'

Rigid Vinyl Bottom Retainer U-Shaped 24' Long

Black with flexible fin to touch door face.
For door thickness 2"

1006-2-14'

Rigid Vinyl Bottom Retainer U-Shaped 14' Long

Black with flexible fin to touch door face.
For door thickness 2"

1006-2-12'

Rigid Vinyl Bottom Retainer U-Shaped 12' Long

Black with flexible fin to touch door face.
For door thickness 2"

1006-1-3/8-24'

Rigid Vinyl Bottom Retainer U-Shaped 24' Long

Black with flexible fin to touch door face.
For door thickness 1-3/8"

1006-1-3/4-12'

Rigid Vinyl Bottom Retainer U-Shaped 12' Long

Black with flexible fin to touch door face.
For door thickness 1-3/4"

1005-2-24'

Aluminum Bottom Retainer U-Shaped 24' Long***Actual Length 24'4"***

For door thickness 2"

1005-1-3/8-24'

Aluminum Bottom Retainer U-Shaped 24' Long *** 24' is DISC

For door thickness 1-3/8"

1003-1-3/8-16'

Aluminum Bottom Retainer L-Shaped

For 1-3/8" thick doors.

7001-9-BROWN

Commercial Side & Top Weather-Strip 9' Long - Brown (DN)

Brown galvanized steel with brown dual fin vinyl.
Commercial and Residential use.
Steel is notched on both ends for easier installation.

1104-14FT-DK-BN

Residential Side & Top PVC Weather-Strip with cap 14' Long - Commercial Brown (DN)

Commercial brown rigid vinyl retainer with commercial brown flexible vinyl seal.
Dual fin vinyl.
Comes with cap to hide screws.

1104-10FT-BROWN

Residential Side & Top PVC Weather-Strip with cap 10' Long - Brown (N)

Brown rigid vinyl retainer with brown flexible vinyl seal.
Dual fin vinyl.
Comes with cap to hide screws.

1104-8FT-CREAM

Residential Side & Top PVC Weather-Strip with cap 8' Long - Cream (C)

Cream rigid vinyl retainer with cream flexible vinyl seal.
Dual fin vinyl.
Comes with cap to hide screws.
Also known as Almond

7001-16-WHITE

Commercial Side & Top Weather-Strip 16' Long - White (W)

White galvanized steel with white dual fin vinyl.
Commercial and Residential use.
Steel is notched on both ends for easier installation.

1106-24-BLACK

Commercial Side & Top Weather-Strip 24' Long - Black

Aluminum retainer with black dual fin vinyl

1106-16-BLACK

Commercial Side & Top Weather-Strip 16' Long - Black

Aluminum retainer with black dual fin vinyl

1001-10-BLACK

Commercial Side & Top Weather-Strip 10' Long - Black

Aluminum retainer with black dual-fin vinyl

32-48-240

Extension Spring 8' Door - 240 lbs Blue ** Replaced by 27-48-240

Double - Loop
32" long 48" stretch 240 lb load
Springs sold individually

Spec Sheet

32-48-220

Extension Spring 8' Door - 220 lbs Green ** Replaced by 27-48-220

Double - Loop
32" long 48" stretch 220 lb load
Springs sold individually

Spec Sheet

32-48-100

Extension Spring 8' Door - 100 lbs Tan ** Replaced by 27-48-100

Double - Loop
32" long 48" stretch 100 lb load
Springs sold individually

Spec Sheet

32-48-80

Extension Spring 8' Door - 80 lbs Gold ** check for availability

Double - Loop
32" long 48" stretch 80 lb load
Springs sold individually

32-48-50

Extension Spring 8' Door - 50 lbs Red ** check for availability

Double - Loop
32" long 48" stretch 50 lb load
Springs sold individually

95-00114

Truck Door Rivet 1" Stainless Steel

Stainless steel construction
Round head design
Cross Reference: T #89217-0032

91-00506

Truck Door U-Bolt 1-3/4" long

Zinc plated finish
Used to attach cables to Whiting doors
Cross Reference: W #70-5

27-20200

Truck Door Winding Plug for Todco Roll-Up Doors

Cast aluminum construction.
Provides easy method to adjusting spring tension.
Cross Reference: T #59158 T #51041 W #4050 340100

CBB125

Stop & Sleeve 1/4" 100 pair

Includes 100 stops and 100 oval sleeves

CBB316

Stop & Sleeve 3/16" 100 pair

Includes 100 stops and 100 oval sleeves

RN1327

Roller 2" Nylon 7" stem 13 ball White Sold per Roller

White Nylon Roller Wheel Diameter: 2"
Working Length: 6.62" Overall Length: 7.59"
Box qty: 100 Box weight: 44.8 lbs (2-7-13 White Nylon)

R5200

Pulley 3" HD Yellow Zinc Plated Steel 200lb Max

Bored for 3/8" diameter bolt
Maximum cable diameter: 1/8"
Riveted with Ball Bearing

25-10276

Truck Door Universal Center Hinge Flush Mount **To extent of inventory

Steel construction Zinc plated finish
Eliminates routing of panels for easier installation
Cross Reference: H-325709

4X8SC50

Devanco Loop 4' x 8' saw-cut 50' lead-in

Manufactured to the highest quality standards to ensure accurate detection our Pre-formed loops come with a 50 foot twisted lead-in ware and available lead-in lengths up to 500 feet.
Ideal for use on existing asphalt or concrete surfaces
Features a non spliced continuous wire throughout loop turns and lead-in.
requires the use of loop sealer when being installed to ensure long lasting trouble-free detection

Installation Instructions Instructions d'installation Loop Placement Guide Guide de positionnement des boucles

6X20PO50

Devanco Loop 6' x 20' pave-over 50' lead-in

Ideal for use on with gravel driveways or surfaces that are to be asphalted
Features a twisted lead-in to reduce the chances of interference and false detections.
Direct burial loops should be buried approximately 6" deep

Installation Instructions Instructions d'installation Spec Sheet Brochure Loop Placement Guide Guide de positionnement des boucles

6X24PO50

Devanco Loop 6' x 24' pave-over 50' lead-in

Ideal for use on with gravel driveways or surfaces that are to be asphalted
Features a twisted lead-in to reduce the chances of interference and false detections.
Direct burial loops should be buried approximately 6" deep