Devanco Canada

 
User Name:
Password:
Remember Me:
Forgot your password
Request a Login
Home
12124

Doorlec Coupling 2-3/4" x 1"

  • Used on model SGP
MA003

LiftMaster Electric Motor Only 1/2 Hp 24VDC BM

  • Same as: MA003M MA-003 MS003 20-60000-1
  • Used on Liftmaster Mega Arm gate operators
25-10109

Truck Door 1" Steel Roller 5" Shaft Length for Todco Roll-Up Doors ** NLA

  • Zinc plated Hardened shaft and raceways
  • Seven roller ball design
50195

Doorlec Front Idler Assembly with Shaft 41B9 Oilite Trolley Models

  • Fits all Doorlec commercial trolley operators
  • Same as # 50190
MCB-421-CONT

Lynx Heavy-Duty Chain Drive Trolley 3/4 HP 220V 1P Contactor Model

  • Heavy-Duty spur gear chain drive trolley
.312-334-L

Cut-to-Length Torsion Spring .312 x 3-3/4" Left Hand Wound Yellow

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-375-INSTALLED
.312-334-R

Cut-to-Length Torsion Spring .312 x 3-3/4" Right Hand Wound Yellow

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-375-INSTALLED
MG020-B-2E-06

Miller Edge Sensing Edge Black 2-Wire End Outlet 6ft Long

  • Electromechanical slide in edge with a small profile for motorized gates and doors rolling shutters and pinch point protection applications.
  • Touch sensitive signaling
  • Temperature range: -30F to 155F
  • Lead wire: 18 gauge 2ft length
  • Sensitivity: nominal 4 PSI
  • 2 wire NO configuration
    • .......more details
L-7-50-0-M

Cable Tie Standard 50 LB Black 7" Nylon 1000/pkg

  • Ultraviolet Resistant
AK-11-KEY

Linear Key (1) only for AK-11 (2200-884)

  • Replacement Key ONLY qty: 1 only
ALUM-801

Aluminum 24" x 100' Spool White / Blanc # 801

  • 20% thicker than the aluminum sold in retail stores (0.022" )
  • Aluminum on the reverse side
  • Gentek # 801
Colour chart
XT2563-CUT

Xcluder Rodent Block 3" Black Sold per Foot

  • For commercial and residential applications
  • Creates a tough barrier that is virtually impenetrable to rodents
Sell Sheet
PRO-APT-5011-U

Micanan 1/2HP 115V 1P Apartment Trolley Operator N1 Eyes Monitored ECB (PRO APTE)

  • Low clearance design for APT applications (9.5")
  • Door speed: 12" per second
  • Monitored board
  • On-Board receiver holds up to 20 transmitters
Installation manualSpecification sheet
14-1004

PVC Roll 8" x .080 Standard Clear Smooth 300' for Replacement Strip Curtain

  • Suitable for most average applications.
  • Temperature Range: -20°F to 150°F (-28° C to 66° C).
  • Formulated with ingredients that meet USDA requirements for incidental food contact.
17-10336

LiftMaster Pulley 7.000"OD 3/4" Bore 4L-Belt

41ASWG-438SA

LiftMaster Motor with Limit Switch Harness for LA400

  • Electric motor for LA400
23-10916

LiftMaster Hoist Interlock Switch SPDT

  • Interlock switch for LM commercial door openers with hoist disconnects
  • 15A 125/250VAC
17K

Rolling Steel 2" Flat Continuous Cast Endlock

  • Endlocks are riveted to curtain slats ends of every other slat to prevent slats from shifting laterally and to prevent curtain wear in guides.
  • Continuous endlocks are both ends of every slat.
  • Rivets included with endlocks
2KW

Rolling Steel 2" Curved Continuous Windlock

  • Windlocks are especially used on rolling steel doors and shutters to prevent "blow-ins" from severe storms or winds.
  • A wind lock is a small metal device that is attached to each slat.
  • Its primary function is to reduce the amount of friction that occurs between the actual door & the guiding panel.
  • When the wind is strong the roller door may be dislodged bent or misaligned from the guide.
  • With a windlock your door can operate efficiently despite wind load or pressure.
  • Windlocks are easy to add on to any existing rolling steel or shutter door
    • .......more details
.262-3-3/4-LH-C

Torsion Spring .262 x 3-3/4" x 144" LH Coated ** Price by Quote Only

  • Black Oxide coating
  • Wire size painted on spring
  • Wire size: .262 ID: 3-3/4" Length: 12 ft
.250-1-3/4-RH-C

Torsion Spring .250 x 1-3/4" x 144" RH Coated ** Price by Quote Only

  • Black Oxide coating
  • Wire size painted on spring
  • Wire size: .250 ID: 1-3/4" Length: 12 ft
.234-1-3/4-LH-C

Torsion Spring .234 x 1-3/4" x 144" LH Coated ** Price by Quote Only

  • Black Oxide coating
  • Wire size painted on spring
  • Wire size: .234 ID: 1-3/4" Length: 12 ft
R5997

Shaft Collar 7/16" ID x 7/8" OD x 7/16" W Zinc

  • Axial Load: 950 LBS
  • Screw length: 1/4"
  • Screw type: Socket set screw
  • Solid steel collar with set screw
BK104

Spring Anchor with Bearing 3-3/8" 13-gauge Sold per Piece

  • For residential applications. Use CBS-338 for commercial / industrial applications
  • Zinc plated 11-guage steel
  • 1" bore bearing installed
  • Single clipped end
MOD081

Manaras Damp Environment Oil and Dust Tight Modification Supplied with Monitored N4 Eyes

  • For applications where dust water spray oil leaks or any other type of condensation is present.
  • Includes TEFC motor seal-tight conduit and connectors NEMA 4/12 O/C/S push-button station NEMA 4/12 control box
  • If operator is monitored this modification will upgrade the photoeyes to NEMA4 as well
S2TR2641E2M

Erone 2-Channel Master Transmitter 433MHz

  • One master transmitter is required for each multi-user receiver for doing the programming.
  • Range in open space: 850ft or 250 m
  • One 12V lithium battery included
  • Bronze body with yellow buttons.
Sell SheetBrochureWireless System Chart
315-KEYLESS

Micanan Wireless Keypad for PRO-315 KP303 ***NLA

  • Guardian model
41A6104

LiftMaster Cable Tension Monitor

  • Used on jackshaft model residential garage door openers
SPR41B60X1

Sprocket 41B60 for a 1" Shaft

UCF-1

Self-Aligning Cast Flange Bearing 1" Bore UCF205-16

  • Grey cast iron painted.
  • Comes with 2x set-screws 1/4-28
  • Square 4 bolt
PED72

Pedestal Post 72" Gooseneck Pad Mount

  • Black powder coat finish
  • Faceplate with universal hole pattern to fit almost any access device
  • 2" x 2" square post
  • Neck is bent with a 6 in. center radius giving a tight professional look
BK150/PR

Residential Bottom Bracket BB-100 sold as a pair

  • For use with 2" rollers
  • Works on 1-3/8" 1-1/2" 1-3/4" and 2" doors
  • 13 gauge residential bottom bracket that secures to the bottom of the door allowing the cable to be attached to the door for lifting
  • Same as part number 263
MDKP

Linear MegaCode Exterior Wireless Keypad 318 MHz

  • MDKP can transmit a unique signal for each 1-6 digit PIN code entered.
  • It has a built-in radio transmitter with a 250-foot range in line-of-sight conditions.
  • Access codes are programmed into the access controller or receiver the maximum number of codes possible depends on the receiver model used.
  • Features Include:
  • Internal antenna
  • 1-6 digit PIN for each user
    • .......more details
Installation Manual
7FT-I-BEAM

LiftMaster 7' I-Beam Rail 3707CH Colour Code: Yellow

  • I-Beam Chain Drive Rail for model 3595
21-2LMC

LiftMaster 2-Strand Bell Wire 500ft White/Black

  • 2 strand 22 gauge tin dipped copper hook-up wire
  • Color coded White & White/black wires
378LMC

LiftMaster Wireless Control Panel

  • Wireless control panel for 315 MHz Chamberlain openers
  • For use as a secondary wall control panel only
  • Mounting hardware and batteries included (CR2032)
  • Auxiliary button to open/close 2nd garage door
Programming InstructionsInstructions de programmation
41A6095

LiftMaster Electric Motor and Bracket for 3800 / 8500

  • For models: 3800 3800P & 3800PLD
  • Also known as 002D1622
24-24-6

Small Relay 24VAC 11-Pin 3 PDT

T-833-C

FL-Allstar 3-btn 9-Door Transmitter 109023-311 MHz***NLA

  • This nine channel transmitter controls up to nine doors (open-close) or three doors (open-close-stop).
  • It has a height switches encoder with three positions: + 0 and - .
  • Manufacturer's model number: 8833TC (190-109023)
  • Dimensions: 4 5/8" x 2 1/4" x 7/8"
Programming Instructions
CAM004

Manaras Limit Cam

  • Limit cam for Mountshaft009A 018C 018D
  • 2 cam's required per shaft
BRAKEPART019

Manaras Brake Band Assembly (Standard Brake)

  • Replaces BRAKEPART017 SHOE008
  • To use on brake drums with edges (DRUM004)
  • New part number is BRAKEPART019KIT
Installation Manual
1336.2

Whiting Roadside Top panel Closure Bracket 10" Raduis

HAE00048

Linear Helical Gear with Grease

  • Includes roll pins
  • Can be used on all Linear / Westinghouse residential operators.
  • Helical gear measures 2-7/8" diameter
25E10311

Truck Door Heavy- Duty Lift Handle Black E-coat finish

  • Wide grip design
  • Black E-coat finish
  • Works with both Whiting and Todco Doors
EP2987

Exhaust Port 6" with latch long barrel ** Discontinued

  • 6" inside diameter 2" sleeve with latch.
  • Includes fasteners & gaskets.
23-10041

LiftMaster Limit Switch Commercial

  • Will work on LiftMaster and Micanan operators
25-10200

Truck Door Top Bracket Assembly for Todco Roll-Up Doors

  • Steel construction Zinc plated
  • Heavy-duty design
  • Assembly includes: Base Slide Bolt & Washer
  • Cross Reference: T #69433 W #4039
Z9401

Coupler 1" Bore Non-Ajustable

  • Non-Adjustable Shaft Coupler Steel Zinc plated
  • 1" Bore
  • L= 4.7" 3 screws and nuts
  • Tightening torque on shaft: 20lb-ft max
02-407

LiftMaster Key Switch Assembly On/Off Nema 4/12

  • Two-position keyswitch. Key removable in either position.
  • Surface Mount
  • May be used on all operators
  • Die-cast metal enclosure non-tamperproof
HAE00013

Linear Turnbuckle Assembly - Chain (HCT)

3BXLT-KA

Control Station Exterior Surface Mount O/C/S N4 with Lockout Non-Metallic Keyed Alike

  • Double pole contacts
  • Stations are randomly shipped with key numbers betwwen K001-K005 unless a specific key number is specified
  • Comes with 2 keys keyed alike
  • H=7" W=2-3/4" D=2-3/4"
37350R

Genie Network Adapter GN-BX

  • To be used in conjunction with Closed Confirm remote.
  • For use on IntelliG® and TriloG™ Pro Series models when using any Genie-Net Accessory.
Programming instructions
CPS3-N4

LiftMaster Option Card with CPS-UN4 Eyes for applications requiring 2 sets of photocells

  • For applications requiring two sets of photoeyes in a damp location
  • Range up to 45ft water dust and corrosion proof eyes (Nema 4x rating)
  • Works with Logic 3 4 5 Commercial Operators
  • Includes Durable steel brackets - floor or track mounting
  • Kit Inludes one set of CPS-UN4 and one CPS3 card ( CPSIII )
HAE00012

Linear Motor Cover LDO50

  • Replacement motor cover only
1-1093

RW Track Bracket #333

  • 22 x 333
SB3381-PAIR

Garex End Bearing Plate 3-3/8" - 1" Commercial Sold as a Pair

EXT-HDWR-BOX-7/8

Installation Box for Extension Springs for 7' & 8' Doors

  • Installation Hardware includes 3" sheaves sheave strap cables safety cable fasteners
CHAIN061

Manaras #410 - 1R26P (Incl. 1 C/L) 13" Long

PCBA-PD3.3

Dyna Hoist/Pulse Replacement Drive Board for DC500-100

422CBAC0

FAAC 422-115V Operator Only ** Price by Quote Only

41181R.S

Genie Main Control Board Kit 6070H 6170HB

  • Primary electrical and logic interface for Genie's 6070 and 6170 Garage Door Openers
  • DOES NOT include the Genie Aladdin Connect Control Board #41153R
312964

ODCC Adjusting Wheel 8" OD 1" Bore

39902R

Genie Wireless Wall Console GWWC-P

  • Completely Wireless Installation – No need to have an additional wired wall console -absolutely no wiring required for operation!
  • Works with all Genie Intellicode® openers since 2013. (Not compatible with Models 1022 1024 1042 2022 2024 2027 2042.)
  • Large buttons and attractive blue LED light makes the console easy to see in the dark.
  • The pulsating light has two optional speeds or can be turned off for maximum battery life.
  • Backlighting will turn red to notify the user of low battery.
  • Turn only the garage door opener light itself on at any time for steady light in the garage.
    • .......more details
210-0057

TNR Doors CurtainLok Kit HDXL9 5/Kit (10 pcs) ** Price by Quote Only

  • Natural UHMW-PE 5 Lok's
  • Sold as a kit of (5) complete loks that require 2 curtain loks and 2 screw (10) of each piece for 5 loks
EHJ-321-1/2

Doorlec Industrial Jackshaft Op. 1/2 HP 230V-1Ph

  • Heavy-Duty Industrial Operator for Sectional or Rolling Steel Doors
  • DC-2000 logic with adjustable Timer To Close Delay On Reverse and Traffic Light Control
  • Solenoid Brake prevents coasting and secures the door when closed
  • TEFC (sealed) continuous-duty electric motor with overload protection
  • Automatic Friction Clutch protects the door and operator
  • Self-aligning Heavy Duty sealed Pillow Block bearings on all shafts for high cycle applications
    • .......more details
GH-353-1.5

Doorlec Industrial Gearhead Door Operator 1.5 HP 575V 3-Phase

  • Extra Deavy-Duty Gearhead Industrial Operator or large Sectional or Rolling Steel Doors
  • DC-2000 Logic Board with adjustable Timer To Close Delay On Reverse and Traffic Light Control
  • Worm gear reducer 40:1 ratio for high-torque and long life
  • Solenoid Disk Brake Prevents coasting and secures the door when closed
  • TEFC (sealed) continuous-duty electric motor with overload protection
  • Optional Friction Clutch available
    • .......more details
GH-353-1

Doorlec Industrial Gearhead Door Operator 1 HP 575V 3-Phase

  • Extra Deavy-Duty Gearhead Industrial Operator or large Sectional or Rolling Steel Doors
  • DC-2000 Logic Board with adjustable Timer To Close Delay On Reverse and Traffic Light Control
  • Worm gear reducer 40:1 ratio for high-torque and long life
  • Solenoid Disk Brake Prevents coasting and secures the door when closed
  • TEFC (sealed) continuous-duty electric motor with overload protection
  • Optional Friction Clutch available
    • .......more details
GH-383-1.5

Doorlec Industrial Gearhead Door Operator 1.5 HP 208V 3-Phase

  • Extra Deavy-Duty Gearhead Industrial Operator or large Sectional or Rolling Steel Doors
  • DC-2000 Logic Board with adjustable Timer To Close Delay On Reverse and Traffic Light Control
  • Worm gear reducer 40:1 ratio for high-torque and long life
  • Solenoid Disk Brake Prevents coasting and secures the door when closed
  • TEFC (sealed) continuous-duty electric motor with overload protection
  • Optional Friction Clutch available
    • .......more details
MOD163G

Manaras Heater in Reducer & C-Box 575V-3P 24VAC 15W + 30W

  • This modification is an option when ordering a commercial operator
3228

Whiting 2" Nylon Roller 3" Shaft

  • Zinc plated shaft 10 roller ball design
  • Shaft Length: 3" Overall Length: 3.75"
2050P

LiftMaster HD Roller Cage Bearing Hinge Bolt to Gate/Post Prime Coated Sold Individually

  • Heavy Duty Roller Cage Bearing Hinge - Bolt to Gate Bolt to Post (Prime Coated)
  • Heavy Duty Construction for Maximum Durability
  • Dependable Roller Cage Bearing Design
  • Even Weight Distribution
  • Five Times The Weight-Bearing Surface of the Nearest Large Hinge
  • Convenient Bolt-On Model
    • .......more details
TCBOD-311

Doorlec Double Arm Barrier Gate Operator 1/2HP 120volts w/ heater and DC2000 board

  • raffic Control Barrier Gate Operator with 24' wishbone arm
Installation manual
PTM-120V

EMX 7 Day Programmable Timer 120V

  • The PTM is an easy to program 7 day timer that provides secure access to any facility any time.
  • With up to 16 ON/OFF events per day and 15 different daily options.
  • Its DIN rail mount design and wide power supply options (12 24 or 120 Volt) make installation easy.
  • The battery backup saves stored programs in the case of power loss.
  • Select either a 12 or 24 hour clock format to program access times for overhead doors gates and parking barriers.
  • The PTM can reduce the wear and tear on motor controls and extend the life of your equipment.
    • .......more details
Instruction manualSpec sheetComparison guide
GUK-BK

Genie Universal Wireless Keypad 41249R

  • Works with most major brand garage door openers. Compatible with Genie Intellicode (rolling code) Genie 12 and 9 switch systems going back to 1988.
  • Also compatible with Overhead Door Chamberlain Craftsman LiftMaster Wayne Dalton Linear Megacode Xtreme Garage Ryobi Sommer and Marantec. •With the Genie Universal Keypad you can control a combination of up to 3 different garage door openers. Each of the 3 openers can be programmed individually of the others so having multiple brands of openers controlled by a single keypad is not a problem.
  • Powered by two triple-A batteries (AAA)
OWL

EMX Microwave Motion & Infrared Presence Sensor

  • The OWL is a vehicle motion and presence sensor that uses microwave and infrared technology to activate automatic doors and industrial gates.
  • Featuring two configurable outputs vehicle motion detection as well as presence detection the OWL activation sensor will ensure the safety of people and goods.
  • Mounting Height: 11.5-21.3 ft (3.5-6.5 m)
  • Supply Voltage: 12-24 VDC/AC
  • Dimensions: 9” (229 mm) x 5” (127 mm) x 5” (127 mm)
  • Connections: 32 ft (10 m) 8 conductor cable directly from sensor
    • .......more details
ManualSell SheetQuickstart Guide
RESET005

Manaras Resettable Overload Fuse 8A 1 Phase

MODKIT065D

Manaras Trolley Hoist #41 Brake Release Kit No Shaft Field Install

  • Modification kit for in-field upgrades
  • Hand chain sold separately
1004-134-8'

Aluminum Bottom Retainer 1 3/4" U-Shape with Reinforcement 8 ft**Actual Length 8'2"***

  • For door thickness 1-3/4"
TRANSF005

Manaras Transformer 120V-24V 40VA

  • Transformer 120V Primary 24V Secondary 40VA
230404

Linear Motor Control Board 5 Relay (w/Brake)

  • For commercial door operator
50060

Doorlec Explosion-Proof Pneumatic Edge Kit

  • Kit includes explosion-proof air switch air hose plugs coil cord & fittings
  • Door size needs to be specified when ordering
26124

Doorlec Clutch Shaft 11-3/4" x 5/8" LJH

  • Previous shaft size was 11-3/4" but have now been replaced by 12-5/8" to accomodate larger box size
BCSI-HV-100-53

Industrial Slide Gate Operator Variable Speed 1 HP 600V 3 Ph with Heater ** Price by Quote Only

  • Heavy-duty alminum cabinet Nema 3R
  • Programmable logic controller
  • Adjustable friction clutch
  • Thermostat controlled heater
  • Opening / Closing speed of 24" / sec
  • Nema 4 control panel
    • .......more details
Installation manualSell sheetBrochureInstallation overviewDessin de installationDiagnostics and troubleshootingDiagnostics et dépannage
SL595203UL

LiftMaster Dual Voltage Slide Gate Op.2 HP 208/230/460V 3 Phase - Heater NOT Incl. UL325 ***NLA

  • UL 325 compliant system.
  • Power: 208/230/460/575 VAC. 3 Phase.
  • Accessory power: 24VAC 500mA max.
  • Monitored safety inputs: 3 Main Board 3 Expansion Board.
  • Temperature specs: Without Heater: -4°F (-20°C) to 140°F (60°C). With optional heater (HTRNB: HTR460 for 460V operators): -40°F (-40°C) to 140°F (60°C)
  • Gate travel speed: 12 in. per second.
    • .......more details
Installation manualManuel d'installationFirst step for installationPremière étape pour l'installationSell sheetWiring diagramWiring diagram 575V
K75-39337

LiftMaster Trolley Nut Kit LA500

  • The travel nut on LA500DC and LA500DCS gate operators may break when excessive force is applied to the gate such as being struck from a vehicle.
  • The travel nut can be identified as the white plastic nut that attaches to the internal lead screw of the arm.
  • The symptom of this problem is that the trolley assembly slides back and forth along the guide slots without mechanical restraint.
  • LiftMaster has created Trolley Service Kit K75-39337 with all the necessary parts and provides instructions on how to replace a damaged travel nut within an LA500 arm
Replacement instructionsInstructions de remplacement
BEA-10-BR3X

BEA Programmable 3 Relay Logic Module w/13 Functions

  • For use on automatic pedestrian doors access controls industrial automation and single-occupancy restrooms. •13 Functions Include:
  • Timer
  • Ratchet/Latching
  • 2 Relay Sequence + Inhibitor
  • 2 Relay Sequence + Door Position
  • Deactivation Timer
    • .......more details
Product guide
.295-6-R

Cut-to-Length Torsion Spring .295 x 6" Right Hand Wound Blue

  • Priced per inch
  • For factory installed cones priced seperately - use part no. C-600-INSTALLED
42GRR-AB

Allen Bradley Thru-Beam Photocell RX/TX Long Range 42GRR9001+GRL9040

ALUM-513

Aluminum 24" x 100' Spool Moonlit Moss / Poussiere de Lune # 513

  • 20% thicker than the aluminum sold in retail stores (0.022" )
  • Gentek # 513
  • Reverse side is #431 Bright White
Colour chart
CP-IDLER-ASSY-MR

Lynx Front Idler Assembly Chain TC3

E/BLOP/150

Automatic Systems Safety Edge for BL229 14'-9" (EABLOP/150)

MR-00021

Micanan Trolley Chain Drive # 41 792 Links for 3/4 1 HP 14ft High Door

8065

LiftMaster Contractor Series 1/2 HP AC Chain Drive Garage Door Opener **DISCONTINUED

  • MyQ® Technology enables you to securely monitor and control your garage door opener and houselights with your smartphone tablet or computer.
  • 1/2 HP AC motor with industrial-strength chain drive provides steady performance and lifting power.
  • Security+ 2.0™ safeguards your household – with every click a new code is sent to the garage door opener so that the door opens only for you.
  • The Protector System® has safety sensors that project a light beam across the garage door opening automatically reversing the door if anything interrupts the beam.
  • Comes with: 1-Button Remote Control (891LM) Door Control Button (883LM)
CP-NCAM

Lynx Limit Cam 5/8-24 Travelling

  • Limit cam / limit nut
MK-00646

Micanan 9" Coax Cable for On-Board Receiver

HSLG-221

Linear Commercial Slide Gate Operator 1/2 HP 230V 1 Ph - Heater not Included

  • Max gate size: 35 ft 1000 lbs
  • Max duty cycle: Continuous
  • Integral APeX Controller
  • Double V-belt to chain reduction
  • #40 roller chain
  • Emergency manual disconnect handle
    • .......more details
50440

Push Button Station 3-Btn with Pilot Light and Key Switch Off/On Nema 4 / 12

  • Surface Mount
  • Dust-proof EEMAC 12 and 4
16-8002

LiftMaster Cogged Vbelt 4L330

  • Fits BG790 barrier gate opener
37348R

Genie Closed Confirm Remote 915 MHz GLR-BX ** NLA

  • Beeps and flashes green when garage door closes.
  • Gives warning tone and flashes red when garage door does not close properly
  • Compatible with Models 4064 3064 4024 and 3024 only.
  • Works with Genie TriloG™ IntelliG® as well as Revolution Series models PowerMax® SilentMax® and ChainMax™ garage door openers
  • Requires a Genie Network Adapter
  • Sleek and compact design
    • .......more details
Programming instructionsInstructions de programmation
CHK-991

Chain Hoist Keeper

  • Chain hoist keeper is not the same as the chain keeper