Devanco Canada

 
User Name:
Password:
Remember Me:
Forgot your password
Request a Login
Home
XR-1

Linear Single Channel Mid-Range Receiver ** Discontinued

  • 1-channel mid-range receiver
  • Up to 10 miles line-of-sight range (with XT-1 & XT-4)
  • Up to 2 miles of line-of-sight with handheld devices
  • Over 64 000 codes
  • Weather-resistant case
  • RF frequency; 27.255 MHz
    • .......more details
MV-00245

Allen Bradley Thru-Beam Photocell 42GRL Rec/Trans 110V 0-30ft Range

  • 42GRL 9000 and 42GRR 9002 transmitter 110V/receiver (24/115V) set
50195

Doorlec Front Idler Assembly with Shaft 41B9 Oilite Trolley Models

  • Fits all Doorlec commercial trolley operators
  • Same as # 50190
PRO-HB-5011U-RH

Micanan 1/2HP 115V 1P Hoist Op. with Brake N1 Eyes Monitored ECB Right Hand

  • Continuous duty belt drive jackshaft operator with emergency chain hoist
  • Full function Smart 10.0 Logic control board featuring on-board receiver with antenna
  • Nema 1 photoeyes included
  • Solenoid brake included
  • On-Board receiver holds up to 20 transmitters
Installation manualSpecification sheet
DM54LC-COATED

Cable Drum High Lift 54" 400-54HL Specialty Coated Pair

  • Use for Commercial Highlift Doors
  • Maximum Door Height 120" + Highlift
  • Maximum Highlift 54"
  • Lifting Weight Per Drum 275 lbs.
  • Resists Chemical/Moisture Corrosion
  • Abrasion Resistant
    • .......more details
MP00064

Micanan Track and #41 Chain for 12' h Door *Actual length 174"*

  • For 3/4 & 1 HP Micanan trolley operators
MOTOR254

Manaras Electric Motor 1/2HP 120/240V 1PH

  • Continuous-duty base mount 60Hz
  • This item is compatible with BRAKE011
.262-334-R

Cut-to-Length Torsion Spring .262 x 3-3/4" Right Hand Wound Red/Yellow

  • Priced per inch
  • For factory installed cones priced seperately - use part no. C-375-INSTALLED
SNRKPMKR

LiftMaster MiniKey Keypad White DISCONTINUED

  • Also known as: SNRKPVP SNRKPOLP SN1610016-B
PRO-HBH-7553U-L

Micanan 3/4HP 575V 3P Heavy-Duty Jackshaft N1 Eyes Monitored ECB Left Hand

  • 3/4 HP575V 3PH Industrial Continuous Duty Jackshaft Operator Ideal for Sectional Doors Rolling Steel
  • Monitored logic board with integral 372Mhz radio receiver that can hold up to 20 transmitters (MK-00647/ MK-00653/ MK-00659) or 200 of the 1 channel hand held transmitters (MK-00660).
  • N-1 Through-beam (MK-00649) photocells included. Other options available.
  • 3-btn O/S/C (02-103) wall control station included
  • Adjustable Friction Clutch 5L320 drive belt
  • #50 Roller chain 18 tooth door sprocket included
    • .......more details
PRO-H-7511E-LH

Micanan 3/4HP 115V 1P Hoist Operator NM ECB No Eyes Left Hand

  • Continuous duty belt drive jackshaft operator with emergency chain hoist
  • Full function Smart 10.0 Logic control board featuring on-board receiver with antenna
  • Solenoid brake OPTIONAL
  • Non-monitored board NO photoeyes
Installation manualSpecification sheet
LMTBU

LiftMaster Monitored Through Beam Photo Eye Nema 4X ** To exent of inventory

  • Meets 2016 UL 325 requirements
  • Long Range powerful beam provides reliable performance.
  • Sensing distance up to 90 ft.
  • Anti-Fogging Lens
  • NEMA 4X rated
  • Wireless network mode eliminates the need to wire between operators in dual-gate applications.
    • .......more details
CP-SP-DISCONNEC

Lynx Hoist Spring MCJH CP-SP-DISCONNECT

SD751L5-RH

LiftMaster Heavy-Duty Slide Door Operator 3/4HP 115V Right Hand (Must include hardware box)

  • Perfect for split and sliding doors involved with industrial applications.
  • It is installed above the door and corresponds with the direction the door will be traveling.
  • Comes equipped with an emergency disconnect and for manual lifting in an emergency and automatic reconnect.
  • The new logic 5 commercial operators come with MyQ Technology built in. * 828LM required
  • Built In Security+ 2.0 radio receiver
  • Solenoid brake included
    • .......more details
Installation manualManuel d'installationSell sheetBrochure
37302R

Genie C-Channel Belt Extension Kit for Silent Max and Quiet Lift models ** Price by Quote Only

  • The extension kit for C-channel belt drive garage door opener rails is to be used in addition to a 7' (3-piece) chain rail to accommodate an 8' high door
  • For Genie silent max 1000 and quiet lift 1200 belt-drive garage door openers only
41A5658

LiftMaster Gear & Sprocket Assembly for 2595 3595

  • Dual sprocket assembly for 3/4 HP chain drive operators.
  • Kit includes: Spring and thrust washer retaining ring bearing plate (2) roll pins dual drive and worm gear helical gear (with retainer) and grease.
  • For use Chamberlain Liftmaster chain drive models: 2595/3595/3595S
SL332-ZP-COPPER

Zinc Plated Copper Sleeve 3/32" 100 Sleeves per Pkg *price on request

  • Oval sleeves ONLY
  • Stops sold separately part # ST332COP. Stops are not zinc plated
CP-CONT-SCHNEIR

Contactor Schneider 24V

  • Works on Lynx MCJH
  • Same as LC2 K12107B7 & MK00108
  • replace Riken Contactor
PBT-3

Exterior 3-Btn O/C/S Control Station Nema 4 Metal Enclosure

  • Surface mount
  • Metal enclosure
  • Not CSA approved
  • Dimensions: 6" H x 2-3/4" W x 3-1/2" D
LEVER051

Manaras Brake Lever MGH C-1 Galvanized

MA007

LiftMaster Cogged Belt 4L290

  • Used on Mega Arm gate operators
.243-258-R

Cut-to-Length Torsion Spring .243 x 2-5/8" Right Hand Wound White/Yellow

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-258-INSTALLED
ALUM-559

Aluminum 24" x 100' Spool Pebble / Kaki # 559

  • 20% thicker than the aluminum sold in retail stores (0.022" )
  • Gentek # 559
  • Reverse side is #431 Bright White
Colour chart
BCH751L5-RH

LiftMaster Hoist Op. with Carwash Mod. and Brake 3/4 HP 115/230 VAC Logic 5 Right Hand ***Replaced by CRBH751L5-RH

  • Industrial Duty Hoist Operator with Damp Environment modification.
  • Comes with either CPS-UN4
  • Brake installed on operator
Installation manualManuel d'installationSell sheetBrochure
25050

Doorlec Explosion Proof 3-Btn Pushbutton Control Station

  • CSA and UL labeled station
  • Three button O/C/S Nema-7/9
  • Surface mount
  • Rated: Class 1 Division 1 Groups C.D.E.F.G.
200BL-10

2" Light Brush Insert 10ft Long

  • Polypropylene bristles
  • Same as MS1703-120
R5220

Sheave Strap 3"

  • Sheave strap also known as fork only
  • Same as part number 302
SNACPH39

LiftMaster HID 30-bit Proximity Card Facility Code 9 *Discontinued*

  • Same as SN000099-30-9
  • Compatible with KPR2000 reader
  • Replaced by LMPC2-SN (need to know facility code)
BL-09

Barlock Kit Complete for 9ft Wide Door Kit includes hardware bag

  • Kit includes hardware bag and bars (55-1/2")
Assembly Manual
ODCC-SPEC.ORDER

Wayne Dalton Special Order *** Price by Quote Only

  • Misc. code for all special order items
PRO-LH-5011R-LH

Micanan 1/2HP 115V 1P Medium-Duty Jackshaft with Contactor Left Hand (PRO LHR)

  • Designed for use on commercial sectional doors with high or vertical lift
  • May also be used on small rolling grilles with max. 15 cycles per hour
  • Includes chain hoist
  • Includes solenoid brake
  • No longer available in contactor model (2017)
Installation manualSpecification sheet
734

Fasteners Track Bolt 1/4-20 x 3/4" 250/Box

  • Knurled shank
  • Max torque = 6
RBH101L5-LH

LiftMaster 1 HP 115/230 VAC 1 PH Commercial Hoist Operator Logic 5

  • H-style operators include a floor level chain hoist to ease manual operation in an emergency or power outage.
  • The operators are typically mounted to the wall when used with larger sectional overhead doors with vertical or high lift and mounted to the wall or the front of the hood when used with rolling doors and grilles.
  • H operators are attached to the door jackshaft to indirectly drive the door.
  • With the addition of the 828LM MyQ technology enables the user to monitor and control their operator and light with their smartphone tablet or computer.
  • Alerts can be received as email or pop-up (push) notifications on a mobile device ensuring the status of your commercial door.
  • Security+ 2.0™ safeguards your facility – with every click a new code is sent to the commercial door operator so the door opens only for you.
    • .......more details
Installation manualManuel d'installationSell sheet
SLR-221

Linear Residential Slide Gate Op. 1/2HP 230V 1 Ph - Cold Weather Package NOT Included

  • Integral entrapment sensing system with digital set point for quick accurate adjustment and enhanced safety
  • Continuous-tone entrapment alarm with reset button
  • LED diagnostic display for ease of setup and troubleshooting
  • Selectable pre-start and run alarm with provision for ADA compliant visual pre-start and run alarm
  • Regulated 24 Volt DC power available for access control accessories
  • Integrated maximum run and auto close timer (0-9 minutes)
    • .......more details
GAREX-REPL-PANL

Garex Replacement Panel Special Order

  • Ordered to customer's exact requirements for size and color
  • Pls call for pricing
5001-18-CHARCOA

Residential Side & Top Weather-Strip 18' Long - Charcoal

  • Painted aluminum retainer with flexible dual fin vinyl.
  • Residential use.
  • Sold by full case quantity (20)
19863R

Genie Clip and Collar Rail Connectors

  • For Genie screw drive units having split rails use a collar and spring clip to join the 3-piece screw.
  • Complete collar and clip set for one 3-piece rail.
  • Compatible with all screw drive Genie garage door openers
  • Set of 2 clips and 2 collars
  • Same as 19806A04 and 19807A04
WD-327310

Wayne Dalton 3-Btn Mini Transmitter 372 MHz 3973

  • Keychain Model but also comes with a Visor Clip
  • Homelink Compatible
  • Size: 2-1/2"" x 1-1/2"
  • Works with Wayne-Dalton Models: Classic Drive: 3014 3018 3514
  • Quantum: 3214 3314 3316 3414
  • ALL I-Drive Models
    • .......more details
1104-9FT-BRONZE

Residential Side & Top PVC Weather-Strip with cap 9' Long - Bronze (F)

  • Bronze rigid vinyl retainer with bronze flexible vinyl seal.
  • Dual fin vinyl.
  • Comes with cap to hide screws.
TBKL-14X4

Turnbuckle Loop Ends 1/4 x 4" WLL 500 lbs

  • Hot dipped galvanized drop forged with lock ends
  • Eye & Eye ends
  • Work Load Limit : 500 LBS
  • Open Length: 12.18"
  • Closed Length: 8.83 "
15-50B12LGH

Sprocket 12 Teeth 1" Bore 1/4" Keyway

  • Same as 50B12x1
12-2125

LiftMaster Flanged Ball Bearing 1-1/4" Bore **to extent of inventory

  • Fits SW490GL swing gate
41D0843

LiftMaster Replacement Motor and Sensor 12VDC

  • For Craftsman garage door opener
K72-18615

LiftMaster Drive Shaft Kit

  • Kit includes: Disconnect Bushing Drive Shaft Pillow Block Bearing Sprocket Disconnect Spring Chain Disconnect Key E-Ring.
  • Works with SL595 SL590.
WINDOW-21X13

Garaga Clear Thermo 21 x 13 White Frame 1-3/4" **** USE CODE G-21x13-134-W

BK020/PR-BOLT

Commercial 2" Safety Bottom Bracket with Bolt Sold as a Pair

  • Maximum cable diameter: 3/16"
  • Maximum door weight: 1300 lbs Zinc
  • Plated Steel
  • Sold as a pair
Installation manual
12575

Doorlec Clutch Disc Fiber 4" dia.x 5/8" bore

  • Fits model LJ / LJH
20113R

Genie Limit Switch Screw Drive

  • For use on Genie screw-drive openers.
  • Compatible with ALL Genie Screw and Trac Drive garage door openers with standard rail assemblies
  • Replaces either the UP or the DOWN limit switch
  • Replaces Genie Genius Trac Drive limit switch models 19795S and 22785R
  • Not compatible with excelerator models
5735.96

Whiting Bottom Seal Grey 96"

  • For Dry Freight and Truss Doors
T-832-M-H

FL-Heddolf 2-btn Mini Transmitter P219-2K-311 MHz (T-832-M-S)

  • Open/Close mini remote for 2 doors
  • Keychain and 12V battery included
  • Compatible with Keystone T-832-H and old Allstar T-832
  • 8 dip switch
  • Same as P219-2K
Manual
3-26-1

Half Hinge Type S Service Type Door ** Available to Extent of Inventory

  • Half hinge type "S"
  • 16-gauge
RSH-6114-MON-RH

Manaras Rapido Jackshaft Operator 1 HP 120V With Elect. Board N4X Thru Beam Eyes Right Hand

  • High speed heavy-duty v-belt drive industrial operator.
  • Designed for use on properly counter-balanced standard high and vertical lift sectional doors weighing a maximum of 750 lbs.
  • Two times the speed of the standard jackshaft operator
  • Manages soft-starts and soft-stops
  • Can be wall or shelf mounted on either side of the door
  • Cast iron pillow block bearings
    • .......more details
Installation manualSell sheet
C20-32F

Bearing 1-1/4" x 2" Press Fit C20-32F+GR 400 LBS

  • Stamped bearing for lighter loads
  • For a heavier duty machined bearing use R5114
C16-32FHD

Bearing 1" x 2" Press Fit Heavy-Duty

  • Flanged ball solid steel bearing
  • Rating: 1 000 000 revolutions
  • Axial load: 150lb max
  • Radial load: 900lb max
MHS5011U-RH

LiftMaster 1/2 HP 120 Volt Medium Duty Slow-Speed Jackshaft Operator

  • Designed for use on rolling sheet doors.
  • It features an adjustable friction clutch high-starting torque motor with overload protection emergency chain hoist with electric interlock and emergency disconnect chain.
  • Easy emergency manual operation using a floor level disconnect and an electrically interlocked chain hoist mechanism
  • Floor level disconnect
  • 24V NEC Class 2
  • Wiring is factory present to C2 mode
    • .......more details
Installation manualSell sheet
65_52091-14

LiftMaster Manual Hoist Mod. M8 #41 Chain for 14ft High Door

  • For 3/4 Hp & 1 Hp Trolley operators
  • Includes floor level brake release cable 1" x 12' round bar.
Installation Manual
K74-18382

LiftMaster Hall Effect Sensor Assembly **to extent of inventory

  • Formerly 76-G0541 G76G0541
  • For SW470 with GL or S3 Board SW490 with GL Board
41A4813

LiftMaster Chain Pulley Bracket Kit

  • Fits chain drive models
37561R

Genie Belt and Bullet Assembly 7ft

  • For 7' Tall Doors Only
  • Fits the following models: IntelliG 1000 (3024) IntelliG 1200 (4024)
  • SilentMax 1000 (3042) SilentMax 1200 (4042)
CONTACTOR003

Manaras Repl. Kit Reversing Contactor Allen Bradley 16A-24VAC

Drawing
50DCTWF

LiftMaster Receiver Logic Board DC. WiFi *** replaced by 050DCTBF

  • Board: Tri-band Security+ 2.0l
  • Fits: 8550W
  • 001D8363
  • Same as 50DCBL5 001D8363 041D8169 1D8169‑2 001D8214 1D8169‑1 1D8169 1D8363
601332.0001

Overhead Sprocket 14T 1/4P x 3/8D

  • Fits Overhead JST drawbar model
  • Sprocket attaches to the limit shaft
VBELT_5L340

VBelt 5L 34"

  • Fits Lynx HDC operator
  • 5/8" x 34"
RA-AD-WWS-MULTI

Lynx Wireless Wall Station AD455 372 MHz

  • Wireless for easy installation anywhere
  • Controls door open-close light on-off
  • Programmable pet opening (Opens to a pre-selected height of 6"-30")
  • Vacation Slide-Lock: Disables remote transmitters keyless entries and wall stations.
  • 10-second closing safety delay
  • Transmitter program button
    • .......more details
Programming InstructionsCompatibility chart
CLUTCH-ASY-MCJH

Lynx Complete Clutch Shaft Assembly for MCJH Operators 5/8" x 12-1/2"

PHOTO-038

Manaras Non-Monitored Photoelectric Cells Nema 4/4X/6P/12/13 Retro-Reflective

  • Retro-Reflective
  • 24Vac 30' range
  • Includes 3" reflector
MALED17

LiftMaster LED Barrier Arm 17 ft

  • The NEW LED Barrier Arm provides exceptional visibility 24 hours a day.
  • Durable aluminum arm with integrated red LED lights on one side and Red/White DOT tape on both sides.
  • Ideal for use with the Mega Arm and Mega Arm Tower
  • Counterweight required part # MALEDCW
79-16088

LiftMaster Circuit Board Assembly for LGO **discontinued**

  • Same as K79-16088
MI00003

Micanan Pocket Wheel for PRO-H/HB/LH

  • Comes with 3/4" bushing and 2 1/4" spring pins
MOD064C

Manaras Trolley Hoist Kit #410 Chain for OTH

  • Modification when purchased with an operator
  • #410 CHAIN WITH FRONTIDLER ASSY
  • CHAIN HOIST ASSY
  • HOIST KIT FOR TROLLEY HOIST CHAIN
Drawing
DL91201

LiftMaster HID PROX 1346 ProxKey III *Discontinued Replaced by LMPK3-ST*

  • Pocket size key fob
  • Low cost entry level compatible with HID Prox Readers.
MA028

LiftMaster Padded Barrier Arm Yellow 14ft

  • For use on Mega-Arm gate operator
  • Requires adapter collars model MA031 - sold separately
Additional arm accessories
TC134-12

Top Cap 1-3/4" 12 ft Black Box Qty Only ** To extent of Inventory

  • Sold in box quantities only
  • 12 pieces per box
UNI-100-82

Uni-Size Bottom Weather Seal 8'2" Long *To extent of inventory*

  • Fits most standard doors 1-3/8" thru 2" thick
  • Pliable in all temperatures
  • Accepts pneumatic or electrical edge
  • 15 pieces per box
29-ABC-15

LiftMaster Fuse 15A

  • For VSL595 gate operator
1104-ASFT-8FT

Elton Aluminum Stiffener for 1104 8ft

  • Prevents the 1104 from buckling in the hot sun
1104-ASFT-16FT

Elton Aluminum Stiffener for 1104 16ft

  • Prevents the 1104 from buckling in the hot sun
HDC-411-LH-CONT

Lynx Ind. Jackshaft with Hoist 3/4Hp 115V Contactor Left Hand

  • 1/2 3/4 1HP 115-230-460 or 575V single or three phase motor capacitor start overload and under voltage protection.
  • Solid state circuit board Lynx-6000. Built in 1.5 second delay.
  • 5L V-belt primary reduction #50 drive chain and sprockets.
  • Adjustable friction clutch magnetic solenoid brake.
  • Precision pillow block bearings on output shaft.
  • Fully driven adjustable limit switches.
    • .......more details
Sell Sheet
ME123-CA3

Miller Edge L-Shaped Aluminum Mounting Channel Sold by the Foot

27-48-180

Extension Spring 8' Door - 180 lbs Gold

  • Loop ends
  • 27" long 48" stretch 180 lb load
  • Sold individually
  • Rated for 10000 cycles
Spec Sheet
16FT-TROLLEY-SET

LiftMaster 16ft Double Angle Rail Set for Comm. Trolley Ops 10-5816-P (2 pcs) *Actual length 227"*

  • Double Angle Rails for doors up to 16' high
  • Works with models : MT T GT APT
  • Indicated selling price is calculated with the purchase of a commercial operator. For pricing on a double angle rail only please contact us
  • Actual Length 18' 11"
PD180CBT30Q

Carlo Gavazzi Photoelectric Through-Beam Receiver 30M

  • Receiver only. If emitter is required order PD180CBT30MU
  • For Industrial doors and Gates
  • Range: 30M
  • Relay output
  • Supply voltage receiver: 12-24VAC/DC
  • Dimensions: 180m x 51 x 49m
    • .......more details
Installation Manual
23-10916

LiftMaster Hoist Interlock Switch SPDT

  • Interlock switch for LM commercial door openers with hoist disconnects
  • 15A 125/250VAC
K75-12492

LiftMaster Brake Kit 115V Units MH

Z9998

Hand Chain 26' for Torque Force Chain Hoists SAE 1008 Zinc Plated

  • Works with all Torque Force Chain Hoists
WKP5LM3

LiftMaster Wireless Keypad 5-Code ** Replaced by KPW5

  • Wireless access control keypad
  • Same features as WKP250LM3
  • 5 code capacity - 4-digit codes
  • 2-way design with confirmation beep
  • 900MHz
Programming Instructions
B119

Rolling Steel Fire Door Bottom Bar Slotted Angles Sold per Foot

4J

Rolling Steel 3" Curved Cast Endlock

  • Endlocks are riveted to curtain slats ends of every other slat to prevent slats from shifting laterally and to prevent curtain wear in guides.
  • Continuous endlocks are both ends of every slat.
  • Rivets included with endlocks
17JW

Rolling Steel 2" Flat Cast Windlock

  • Windlocks are especially used on rolling steel doors and shutters to prevent "blow-ins" from severe storms or winds.
  • A wind lock is a small metal device that is attached to each slat.
  • Its primary function is to reduce the amount of friction that occurs between the actual door & the guiding panel.
  • When the wind is strong the roller door may be dislodged bent or misaligned from the guide.
  • With a windlock your door can operate efficiently despite wind load or pressure.
  • Windlocks are easy to add on to any existing rolling steel or shutter door
    • .......more details
5X15SC50

Devanco Loop 5' x 15' saw-cut 50' lead-in

  • Manufactured to the highest quality standards to ensure accurate detection our Pre-formed loops come with a 50 foot twisted lead-in ware and available lead-in lengths up to 500 feet.
  • Ideal for use on existing asphalt or concrete surfaces
  • Features a non spliced continuous wire throughout loop turns and lead-in.
  • requires the use of loop sealer when being installed to ensure long lasting trouble-free detection
Installation InstructionsInstructions d'installationLoop Placement GuideGuide de positionnement des boucles
MOD034

Manaras Monitored Photocell Upgrade N1 to N4

  • Ideal for industrial environments submersible and impact resistant.
  • Flexible design withstands and realigns after mechanical impact.
  • Max. range 45ft.
  • Incl. photoeyes 3ft of conductor wire and mounting hardware.
  • Applies to all operator models with electronic control "M" types.
BK101/PR

Spring Anchor Bracket USA 8-Gauge sold as a pair

  • Universal spring anchor brackets - Residential/Commercial
  • Centerline adjustment: 3-5/16" to 6-3/4"
  • Bright zinc plated 8 gauge steel
  • No bearing
  • Bearing R5110 sold separately
CPS-MEI

LiftMaster Electric Edge Card **to extent of inventory

  • The CPS-MEI is an interface for a monitored 2-wire edge that can be used in place of photo eyes and meets the monitored requirement of UL325-2010
  • Same as Miller Edge SM-102
CH753L5-RH

LiftMaster Hoist Op. with Carwash Mod. 3/4 HP 208/230/460 VAC 3 Ph L5 Right Hand

  • Industrial Duty Hoist Operator with Damp Environment modification
  • Brake not included
  • Comes with CPS-UN4 photoeyes
Installation ManualManuel d'InstallationSell sheetBrochure
Q223

LiftMaster Control Board Master / Second (K001A5869) *** Discontinued

  • Replacement control board for the Miracle-One gate operator with two arms - Master / Slave.
  • Same as part no. K001A5869
BK309

Jamb bracket J-09 #9 12 gauge

  • Sold by the piece
  • Height 4.25" Length 1.9" Width 2.45"
  • Bright zinc plated 12 gauge steel
  • 2" long track mounting slot
  • manufactured to accept ¼” fasteners when attaching to the track and 5/16” to lag to the wall.
BK306

Jamb bracket J-06 #6 12 gauge

  • Sold by the piece
  • Height 3.50" Length 1.9" Width 2.45"
  • Bright zinc plated 12 gauge steel
  • 2" long track mounting slot
  • manufactured to accept ¼” fasteners when attaching to the track and 5/16” to lag to the wall.
SHAFT002

Manaras Hand Crank Shaft 5/8" Sold per Foot Max. Length 12ft

  • Must specify exact length required when ordering
SPREADER003

Chain Tensioner for 1-1/4" / 1-1/4"

  • Chain spreader for installation with 1-1/4" operator shaft and 1-1/4" door shaft
  • Designed to keep tension on the chain when used with a wall mount commercial operator. It helps avoid premature wear on the door shaft bearing and commercial operator output shaft bearing
Installation instructions
MOD050

Manaras Friction Clutch Mod. #50 Chain Gear Head Operators

  • Installed directly on the output shaft of the operator.
  • Provides added protection by causing the clutch to slip when the door systems requires adnormal torque to be operated.
  • Includes sprocket for #50 chain
  • Operator mounting side must be specified
  • A spreader bar cannot be used in conjunction with this modification
  • This modification applies to OGH and MGH operators
    • .......more details