Devanco Canada - Get The Right Garage Door Opener‎ and Parts

PMR10RIT

Carlo Gavazzi Retro-Reflective Sensor with Imperial Connector

PMR series sensors have a sensing range up to 32.81 feet and a fixed sensitivity.
Immune to ambient light Selectable output function.
The plastic housing is IP 67 rated and allows cable or screw terminal connections.
Optional timing features include: Delay on operate delay on release or one shot (triggered on leading or trailing edge).
24-240 VAC or 12~240 VDC
Relay Output

.......more details

CL-74-RH

Wayne Dalton Complete Replacement Barrel Assembly 4.5" Diameter 74" Long

Replacement for serial # 10093517-1 PIPESM

3228.1

Whiting 2" Nylon Roller 3" Shaft Stainless Steel *** To Extent of Inventory

This is a Whiting original roller

MG00030

Micanan Limit Cam 1/2-20 UNF

Sold seperately. 2 required per operator

RSH-6114-MON-RH

Manaras Rapido Jackshaft Operator 1 HP 120V With Elect. Board N4X Thru Beam Eyes Right Hand

High speed heavy-duty v-belt drive industrial operator.
Designed for use on properly counter-balanced standard high and vertical lift sectional doors weighing a maximum of 750 lbs.
Two times the speed of the standard jackshaft operator
Manages soft-starts and soft-stops
Can be wall or shelf mounted on either side of the door
Cast iron pillow block bearings

.......more details

Installation manual Sell sheet

AK-11-KEY

Linear Key (1) only for AK-11 (2200-884)

Replacement Key ONLY qty: 1 only

3950-41DS

LiftMaster Dead-Shaft Sprocket Kit for 3950

Used on doors without live shafts
Same as 41A7280
Includes #41 chain sprocket

Sell sheet

4X20PO50

Devanco Loop 4' x 20' pave-over 50' lead-in

Ideal for use on with gravel driveways or surfaces that are to be asphalted
Features a twisted lead-in to reduce the chances of interference and false detections.
Direct burial loops should be buried approximately 6" deep

Installation instructions Instructions d'installation Spec Sheet Brochure Loop Placement Guide Guide de positionnement des boucles

ALUM-801

Aluminum 24" x 100' Spool White / Blanc # 801

20% thicker than the aluminum sold in retail stores (0.022" )
Aluminum on the reverse side
Gentek # 801

Colour chart

XT2564-00-W

Xcluder Rodent Block 4" Black 75' Reel

For commercial and residential applications
Creates a tough barrier that is virtually impenetrable to rodents

Sell Sheet

XT2563-00-W

Xcluder Rodent Block 3" Black 75' Reel

For commercial and residential applications
Creates a tough barrier that is virtually impenetrable to rodents

Sell Sheet

124773

Roller 3" UHMW 7-1/4" Stem Rubber

3" UHMW tire covered with rubber
6202 sealed precision bearing
7-1/4" zinc plated stem
Rating: 200lb load; 10000 cycles of a 12' door
Helps quiet the operation of jackshaft operators

KPW250

LiftMaster New Wireless Commercial Keypad 250-Code Sec.+2.0

Comes with a durable blue LED backlight metal keypad and a 5- year lithium battery.
KPW250 is perfect for larger commercial applications such as a maintenance door entrance or gated entrance for a small business.
Compatible with Security+ 2.0 Security+ as well as Linear Multi-Code 300 MHz
250 permanent PINs and 10 unique temporary PINs mean flexibility to set up multiple users for commercial settings; unique temporary PINs can be set for 1 to 9 uses
Allows for removal of a single PIN while maintaining full access for other users
Zinc-alloy metal front cover for tough environments

.......more details

Programming instructions Instructions de programmation Sell sheet Brochure Compatibility chart

374UT

LiftMaster Universal 2-btn Mini Transmitter

Dual frequency universal transmitter
Will activate 2 different types of openers (1 on each button)
Compatible with major brands except Marantec & Hormann
This mini remote is NOT compatible with DIP switch remotes or receivers

Programming instructions Sell sheet

PVD-ARM-ALUM-16

Aluminum Gate Arm 16' 1" x 3.5" with Reflective Band

1003-3-DF-200FT

Bottom U-Rubber 3" Dual Fin Black 200' Long

200ft spool of vinyl insert.
Dual fin

MUSHROOM-PB

Lockable Mushroom Push Button with 1 NC Contact

N/C Contact "Stop"
Push to Stop Turn to Unlock
NEMA 4 Enclosure

HTUS

Stainless Steel Garage Door Top Roller Bracket 12-Gauge Single Slot

Manufactured with 12ga. Rust-Resistant 304 Stainless Steel
Universal Design
Adjustable from 2"-3-1/2"
Fits Most Overhead Sectional Doors
Priced Per Each

PS241F

Adjustable Regulated Power Supply with Optional BBU 6-24VDC 1AMP

3 preset voltages: 6 12 and 24 VDC
Full adjustment from 2 to 24 VDC if required
Requires AC transformer for input power (minimum 14 VAC for 12 VDC output 26 VAC for 24 VDC output cannot be connected directly to 120 VAC)
Maximum 1 amp. Output at 70 deg. F and free air
Ripple: Minimum load: 0.007vrms Half load: 0.028vrms Maximum load: 0.057vrms
Regulation: 97.5%

.......more details

Wiring Diagram Diagramme de raccordement Spec Sheet Spécifications

RA-AD-WKP-10

Lynx 10-btn Wireless Keypad AD455 372 MHz

Compatibility chart

MT-1B

Linear 1-btn MegaCode Block Coded Transmitter 318 MHz

Compatible with all Linear access receivers and controllers
Superior transmission range
Operate LED
Visor clip included
Sold in lots of 10
Power: 9-volt battery

.......more details

15-50B35QGH

Sprocket 50B35 1-1/4" Bore 1/4" Keyway

12-10882

LiftMaster Copper Bushing

3/4" x 1" x 5/8"

RDGRNCARD

LiftMaster Warning Device Option Board with Red/Green Light Box

The Red/Green warning light card flashes a warning light for 10 seconds prior to the Timer to Close activating the door to close.
Advanced warning of the door closing helps prevent traffic collisions with the door
Controls both 24V & 110V traffic lights

Installation Manual

MK-00157

Micanan Intrinsically Safe Modification (Safepack)

Modification available for add-on to certain models only

D6375-164

Cable Drum High Lift 164" 1" Bore Torque Force Pair

Maximum hi-lift: 164"
Capacity: 800 lbs per drum
Cable length: Floor to shaft center 181" minus amount of Hi-Lift
Cross reference: DNS 410-164 OMI 164HL M162-4165

8086.225.325

Whiting .225 x 2-5/8 IN x 32-1/2" Roadside with Cones

An original Whiting assembly

7001-WG-10-MO

Residential Wood Grain Side & Top W/S Medium Oak 10' Long - Painted Screws to Match

Medium Oak retainer with Medium Oak vinyl
PVC Wrapped
Steel is Notched on Both Ends for Easier Installation
Economical
Dual Fin Vinyl
Painted Screws to Match

.......more details

2'6X6SC50

Devanco Loop 2'6" x 6' saw-cut 50' lead-in

Manufactured to the highest quality standards to ensure accurate detection our Pre-formed loops come with a 50 foot twisted lead-in ware and available lead-in lengths up to 500 feet.
Ideal for use on existing asphalt or concrete surfaces
Features a non spliced continuous wire throughout loop turns and lead-in.
requires the use of loop sealer when being installed to ensure long lasting trouble-free detection

Installation Instructions Instructions d'installation Loop Placement Guide Guide de positionnement des boucles

1001-18-BLACK

Commercial Side & Top Weather-Strip 18' Long - Black

Aluminum retainer with black dual-fin vinyl

MA028

LiftMaster Padded Barrier Arm Yellow 14ft

For use on Mega-Arm gate operator
Requires adapter collars model MA031 - sold separately

Additional arm accessories

ZT35081029

Firestar Fire Door No. 2 Slat 22-GA White

S2TR2641E1

Erone 1-Channel Mini Transmitter 433MHz

Open/Close remote for 1 door
Palm-size transmitters 83 x 48 x 16m (3.25 x 1.9 x 0.6in)
Learn button programming
Ergonomic stylish design Rugged & durable
Light grey base with yellow buttons
unobstructed range: 820 ft (250m)

.......more details

Sell Sheet Brochure Wireless System Chart

MD-00003

Sprocket 41B36 x 1" Bore 1/4" Keyway

2 set screw 5/16

LIMIT025A

Manaras Single Snap-Action Limit Switch with 'S' Lever

For all Manaras commercial operators prior to 2000 - except light duty models
Can be used on Doorlec Lynx and others
Unimax (SPDT)

Limit Switch Chart

MA001

LiftMaster MA & MAT Control Board (K79-60166)

Electronic board for barrier gate operator
Same as K79-60166
Can be used in various Autogate Operators

41D605-1

LiftMaster Electric Motor 80kg/100kg

For retail models: WD952KD HD800D and WD952LD

Replacement Instructions Instructions de remplacement

PEDALU42-HOOD

Aluminum Hood Only No Post for PEDALU42

Hood only No post
High quality aluminum
Boitier pied estau seulement en aluminum

Shop drawing

IS40P

BEA Presence Sensor

Infrared presence sensor for use in industrial applications. The sendor utilizes 40 active infrared spots for reliable detection.
Ideal for use on automatic industrial doors vehicle gates/barriers and loading docks.
Equipped with 9 pre-programmed pattern configurations for various industrial applications.
Various learn time settings allow presence detection to either remain constant or ignore a motionless object after a pre-determined period of time.
Mounting height: 8-16'
Detection field: 10'x10' at max. mounting height of 16'

.......more details

Installation manual Sell sheet Cut sheet

K001A6039

LiftMaster Control Board for LA400

Replaces P/N 127A0071C PN 127A0071F

Installation Manual

LC-36A

LiftMaster Light Curtain **discontinued

Must be used with a primary entrapment device and be installed along the vertical plane of the door.
Color-coded transmitter and receiver for easy identification.
Provides 36 in. of effective height coverage to increase the area of protection.
Multiple sets of LC-36A curtains can be mounted on a door providing coverage flexibility.
Maximum door width of 33 ft. ensures coverage for most commercial doors.
Eight (8) LEDs per side and 22 cross-beams produce an invisible curtain of infrared light for maximum detection capability.

.......more details

Installation Manual Manuel d'Installation Sell Sheet Connecting the lc-36A to a Non-LiftMaster Opener

K75-51048

LiftMaster Cover with Crank Housing for SL3000 **DISCONTINUED

HD polyethylene cover

27-48-100

Extension Spring 8' Door - 100 lbs Tan

Single - Loop
27" long 48" stretch 100 lb load
Sold individually
Rated for 10000 cycles

Spec Sheet

27-48-110

Extension Spring 8' Door - 110 lbs White

Single - Loop
27" long 48" stretch 110 lb load
Sold individually
Rated for 10000 cycles

Spec Sheet

MP-00044

Micanan Drive Chain #40 Modification for Trolley Operators 18' High Door In Lieu of #41

Chain modification when purchased with any of the following operators; PRO-T TB APT and GT

21-10340

Transformer 115-24V AC 20VA

120V Primary 24V Secondary 20VA

Z9998

Hand Chain 26' for Torque Force Chain Hoists SAE 1008 Zinc Plated

Works with all Torque Force Chain Hoists

MWTA12

Miller Edge Transmitter with Audible Alarm Small *** No Longer Available

The MWTA12 safety edge transmitter is designed to provide wireless signal transmission form the safety edge to the motor controls.
It is easily mounted and wired to the gate or door edge sensor. When the sensing edge comes into contact with an obstruction a closed circuit signal is created and is sent to the transmitter.
The transmitter relays the information to the receiver and the receiver passes the signal along to the operator motor.
The gate or door stops movement and will then reverse the direction of travel.
Comes with an Audible Alarm feature that activates when the battery is running low and needs to be replaced.
Comes standard with a NEMA 4 weather-proof enclosure. The enclosure can be easily mounted with the four mounting holes and screws provided.

.......more details

Installation Manual Sell Sheet

14JW

Rolling Steel 3" Flat Cast Endlock

Endlocks are riveted to curtain slats ends of every other slat to prevent slats from shifting laterally and to prevent curtain wear in guides.
Continuous endlocks are both ends of every slat.
Rivets included with endlocks

EAST/STL-E3

Rolling Steel 3" Cast Eastern Steel Endlock

Endlocks are riveted to curtain slats ends of every other slat to prevent slats from shifting laterally and to prevent curtain wear in guides.
Continuous endlocks are both ends of every slat.
Rivets included with endlocks

2KW

Rolling Steel 2" Curved Continuous Windlock

Windlocks are especially used on rolling steel doors and shutters to prevent "blow-ins" from severe storms or winds.
A wind lock is a small metal device that is attached to each slat.
Its primary function is to reduce the amount of friction that occurs between the actual door & the guiding panel.
When the wind is strong the roller door may be dislodged bent or misaligned from the guide.
With a windlock your door can operate efficiently despite wind load or pressure.
Windlocks are easy to add on to any existing rolling steel or shutter door

.......more details

2JW-D064

Rolling Steel 2" Curved Cast Windlock

Windlocks are especially used on rolling steel doors and shutters to prevent "blow-ins" from severe storms or winds.
A wind lock is a small metal device that is attached to each slat.
Its primary function is to reduce the amount of friction that occurs between the actual door & the guiding panel.
When the wind is strong the roller door may be dislodged bent or misaligned from the guide.
With a windlock your door can operate efficiently despite wind load or pressure.
Windlocks are easy to add on to any existing rolling steel or shutter door

.......more details

ST532COP

Copper Stop 5/32" 100 Stops per Pkg *price on request

Stops ONLY
Sleeves sold separately part # SL532COP

.283-3-3/4-RH-C

Torsion Spring .283 x 3-3/4" x 144" RH Coated ** Price by Quote Only

Black Oxide coating
Wire size painted on spring
Wire size: .283 ID: 3-3/4" Length: 12 ft

.250-2-RH-C

Torsion Spring .250 x 2" x 144" RH Coated ** Price by Quote Only

Black Oxide coating
Wire size painted on spring
Wire size: .250 ID: 2" Length: 12 ft

.207-2-5/8-RH-C

Torsion Spring .207 x 2-5/8" x 144" RH Coated ** Price by Quote Only

Black Oxide coating
Wire size painted on spring
Wire size: .207 ID: 2-5/8" Length: 12 ft

CF-101-8

Commercial Side & Top Weather-Strip 8' Long Aluminum / Vinyl

Same as Garaga CF101

OPH-6113-CONT-R

Manaras Opera-H 3/4HP 120V 1Ph with Mechanical Contactor Right Hand *** To Extent of Inventory

A heavy-duty industrial jackshaft operator
For use on Standard High and Vertical Lift sectional doors
Can also be used on Rolling doors and Grilles
Comes with a self-engaging chain hoist for manual operation
Clearence: side room required 15"

Installation Manual Sell Sheet

K94-36591

LiftMaster Junction Box with Cable for LA500

Compatible with LiftMaster LA400 LA500 swing gate operators
Waterproof junction housing
Includes 40 ft. of insulated cable
Includes mounting hardware wing-nut/flange wall anchors

ULT-MVP

EMX Industries Multi-Voltage Loop Detector (ULT-MVP-U)

Combines small size with 9VDC to 240VAC input range.
Size: 73 x 38 x 78mm
ULTRAMETER™ display indicates the appropriate sensitivity setting the vehicle positioned on the loop
Ten (10) sensitivity adjustments
Four (4) frequency settings
Automatic sensitivity boost (ASB) delay fail-safe/fail-secure and infinite or normal (5 min.) presence

.......more details

Operating Instructions Sell Sheet

36605A

Genie Pulley Assembly Belt Drive *** NLA

Genie 36605A PULLEY
For Belt Drive Models
For Chain lift Belt Lift ReliaG 600 & 800 1022 1024 1042 2022 2024 2042
Also for Overhead Door Models Legacy 800 & Standard Drive Belt

SOLID_SHAFT_24'

Solid Shaft 1" Keyed 24 ft Galvanized

Maximum length for a solid shaft is 24ft
Actual length is approx. 24'-1"

SOLID_SHAFT_15'

Solid Shaft 1" Keyed 15 ft Galvanized

Actual length is approx. 15'-1"

SOLID_SHAFT_12'

Solid Shaft 1" Keyed 12 ft Galvanized

Actual length is approx. 12'-1"

8002-7FT

Side Weatherstrip with Black Rubber Bulb for Pedestrian Door 7ft Long

Aluminum and Black Rubber
Comes in 7ft lengths

MGR20-Y-2U-06

Miller Edge Sensing Edge Round Yellow 2-Wire Universal Outlet 6ft Long

��Electromechanical edge for standard 2" round or square frame sliding sing and bi-part gates. •3-sided activation allows for immediate stopping or reversing of motion •Contours to round or square posts. •Temperature range: -30F to 155F •Lead wire: 18 gauge 2ft length •Sensitivity: nominal 6-8 PSI •2 wrie NO configuration •ANSI/UL325 recognized component •Cannot be bent •One year warranty

Installation Manual Sell Sheet

201-300-301-01

Equinoxe Long Range Transmitter O/C/S for 1-Door 433 MHz New Generation

Open/Close/Stop remote for 1 door
Range of approx. 1000ft
A heavy-duty remote for Industrial applications
Year 2016 + (red sticker under batteries)

Programming Instructions Instructions de programmation

SETR2641-TM

Erone 4-Channel Wireless Wall Switch Transmitter 433MHz

For sun-blinds and awnings.
Frequency: 433.92 MHz.
Range: Up to 200m (Open-field).
Dimensions (L x W X D): 80 x 80 x 25mm.
Input voltage: 3V Battery (CR2032).

User Manual Wireless System Chart

27024

Doorlec Electric Motor TEFC 3/4HP 115/230V DC403

ase mount

Wiring diagram for 120V Wiring diagram for 230V

OPH-6213-ECB

Manaras Opera-H 3/4HP 240V 1Ph with Electronic Circuit Board

A heavy-duty industrial jackshaft operator
For use on Standard High and Vertical Lift sectional doors
Can also be used on Rolling doors and Grilles
Comes with a self-engaging chain hoist for manual operation
Clearence: side room required 15"

Installation Manual Sell Sheet

CLUTCHPAD005

Manaras Clutch Pad 5/8" ID 4" OD

Made from commercial grey vulcanized fiber

24701R

Genie Chain Drive Dog Limits 3-PKG

Replacement limits for older model Genie Chain Drive openers with steel T-Rail assembly
Replaces the clip-on limit switch
Limit dogs external rail-mounted limit switches

798

Fasteners Cotter Pin 3/32" x 1" 100/Bag

LA500HDTKITSTD

LiftMaster Torroid Transformer Kit

Powers gate from AC power-120V or 220V single phase.
Ideal for applications that prefer AC transformer run operator vs. battery run operator
Ideal for areas that experience temperatures below -4 F for extended periods

733

Fasteners Flat Washer 5/16" Zinc 1000/Box

MV-00297

Micanan Commercial Wireless Keyless Entry 372 MHz

Will work on Micanan commercial operators that have an on-board receiver
If there is no receiver then MK-00648 is required
Same as MV-00086

Programming instructions Instructions de programmation

.343-6-R

Cut-to-Length Torsion Spring .343 x 6" Right Hand Wound Blue/Red

Priced per inch - cones sold seperately
For factory installed cones use part no. C-600-INSTALLED

99553NYHNG

Nylon Hinge Black #3 *** To extent of inventory

Equivalent to 14-ga in strenght

99552NYHNG

Nylon Hinge Black #2 *** To extent of inventory

Equivalent to 14-ga in strength

MK-00002

Micanan Timer Module (2 wire)

19-5814

LiftMaster Trolley Chain Pack #48 for 14ft Door

Chain pack only

H755L5-LH

LiftMaster Ind. Duty Hoist Op. 3/4 HP 575 VAC 3 Ph Logic 5 Left Hand

Includes CPS-U
H-style operators include a floor level chain hoist to ease manual operation in an emergency or power outage.
The operators are typically mounted to the wall when used with larger sectional overhead doors with vertical or high lift and mounted to the wall or the front of the hood when used with rolling doors and grilles.
H operators are attached to the door jackshaft to indirectly drive the door. Connectivity
MyQ® Technology enables you to securely monitor and control your facility operator and lights with your smartphone tablet or computer for greater peace of mind.
Alerts can be received as email or pop-up (push) notifications on a mobile device ensuring the status of your commercial door.

.......more details

Installation Manual Manuel d'Installation Sell sheet Brochure

75-10170

LiftMaster Trolley-Slider Assembly (08-10169)

For LiftMaster trolley models MT T GT
Also known as: 307085008 75-10170 08-10169 085008 7510170

111854.0002

Overhead Logic Board for RSX 3/4 & 1 HP 1PH

Description: KITPCB1PH3/4-1HPSX/HXUL10
For RSX ad RHX models 3/4 & 1 Hp Single phase operators

K75-10177

LiftMaster Brake Hub Assembly

Assembly includes: Brake hub set screw push-on fastener and feather key

CLUTCH-SHAFT-AS

Lynx Complete Clutch Shaft Assembly for HDC Operators 3/4" x 17-1/2"

Fits all HDC operators - waterproof or not.

M8-705

Marantec Photoeyes 69190 / 97246

Works on all Marantec units
Includes brackets hardware and wiring
Same as item #86850 97246 used to be M4-705
Made in Germany

Installation instructions

STRUT-2-1/4-18'

Door Strut 2-1/4" Hemmed 18ft Long

Reinforcement bar 2-1/4"

02-401

Push Button Control Station 1-Button Surface Mount NEMA 1

Die-cast metal enclosure
START may be used as OPEN with all LiftMaster operators.
May be used as OPEN and CLOSE on all operators with type B2 control wiring

27096A

Genie Drive Gear *** To Extent of Inventory

Gear for Genie Chain Glide PMX Series and PCG Series
3-1/2 inch diameter nylon gear with square center hole
Square center hole is 7/16"

K75-12858

LiftMaster Clutch Kit for SL595

Kit includes: Clutch Pressure plate Torque Limiter Sprocket Assembly Bell Washer Nut Hex Jam Clutch Disc and Keyway

Replacement Instructions

BK150/PR

Residential Bottom Bracket BB-100 sold as a pair

For use with 2" rollers
Works on 1-3/8" 1-1/2" 1-3/4" and 2" doors
13 gauge residential bottom bracket that secures to the bottom of the door allowing the cable to be attached to the door for lifting
Same as part number 263

PRO-W_MOD

Micanan Nema 4/12 Modification

This modification provides a TEFC motor N4/12 watertight/oiltight control enclosure waterproof drive and limit chain NEMA4 thru-beam eyes and a watertight/oiltight three-button station.

821LM

LiftMaster MyQ Garage Universal Smartphone Garage Door Controller

Enables smartphone control of most major brands of garage door opener with photoeyes.
Includes Wi-Fi hub and door sensor

Installation Manual Manuel d'Installation Sell Sheet Brochure

F539.90000

Bircher Infrared Programming Remote RC Duo 2 Red

Conveniently program all parameters from ground level
Backlighting of specific buttons provide instant confirmation of programmed parameter & value
Configure any Hercules 2 Hercules 2s Reflex 2 or UniScan sensor with the same remote
Multiple address feature allows programming of a single sensor even in close proximity to other sensors
Large highly visible buttons
Automatic off feature conserves battery life

.......more details

Programming Instructions F539.90000 Sell Sheet

50-450

LiftMaster Interlock Switch for Sectional Door Nema 4 (Same as 50-13529)

Interlock switch is engaged by the door side lock and disables operator control.

888LM

LiftMaster MyQ Control Panel with TTC Sec+ 2.0 *No Longer Available*

Works with ANY Liftmaster Sears Chamberlain Access Master Master Mechanic Formula I True Value True Guard and Raynor Garage Door Opener Manufactured after 1998 using a amber / orange yellow or purple learn button.
Replaces existing control panel
Simple programming of new MyQ accessories and Security+ 2.0 remote controls and keyless entry products
Motion-activated opener light control
Adjustable light timer option
Lock feature

.......more details

Installation Manual Manuel d'Installation Sell Sheet

G3T-BX

Genie 3-btn Dual Frequency Transmitter 37218R

This transmitter replaces all Intellicode and Overhead Door Code Dodger transmitters made after 1997.
For Intellicode operators pre-1997 use GITR3 for best results
Operates with 315 & 390 MHz Intellicode 2 technology
Able to control up to 3 garage doors
Visor clip and battery CR2032 included
Replaces: GIT GIC90 GMIC90 G2T OCDT ACSCTG TBSTG GIT-1 GIT-2 GIT-3 ACSCTG Type 1 ACSCTG Type 2 ACSCTG Type 3 TBSTG GIC90-1 GMIC90-3 GIC90-2 GMIC-3BL GIC90-3 OCDT-1 OCDT-2 OCDT-3 G2T-1 G2T-2 G2T-3 GICTD-1 GICT390-1 GIFT390-1 GIT390-4

.......more details