Devanco Canada - Get The Right Garage Door Opener‎ and Parts

GRD-2

Linear 2-Channel Delta3 Gate Receiver 310 MHz (DNR00102)

Auto voltage sensing - no jumpers to set
Two Form ”A” (normally open) relays rated at 30 Volts AC/DC up to 5 Amps
Supplied with whip antenna three feet of coaxial cable and bulkhead connector
Power: 12 - 30 VAC or 10.5 - 30 VDC
Codes: 128 (set by dip switches)
RF frequency: 310 MHz

.......more details

Programming Instructions

MDR-2

Linear 2-Channel MegaCode Receiver 318 MHz *** Discontinued

Activates two devices
Wire lead antenna
Mounting bracket supplied
Memory: storage for up to 10 MegaCode transmitters
Power: 24 VAC/VDC
Codes: 1000000+ (MegaCode format)

.......more details

Programming Instructions

309013

Linear 1-Channel Multi-Code Receiver 310 MHz

Three tabs for universal mounting
One N/O relay
Compatible with 310 MHz Stanley and Multi-Code transmitters only.
Operates on 24 VAC power
One channel
Codes: 1024 (set by dip switches)

.......more details

Programming Instructions

G3T-BX

Genie 3-btn Dual Frequency Transmitter 37218R

This transmitter replaces all Intellicode and Overhead Door Code Dodger transmitters made after 1997.
For Intellicode operators pre-1997 use GITR3 for best results
Operates with 315 & 390 MHz Intellicode 2 technology
Able to control up to 3 garage doors
Visor clip and battery CR2032 included
Replaces: GIT GIC90 GMIC90 G2T OCDT ACSCTG TBSTG GIT-1 GIT-2 GIT-3 ACSCTG Type 1 ACSCTG Type 2 ACSCTG Type 3 TBSTG GIC90-1 GMIC90-3 GIC90-2 GMIC-3BL GIC90-3 OCDT-1 OCDT-2 OCDT-3 G2T-1 G2T-2 G2T-3 GICTD-1 GICT390-1 GIFT390-1 GIT390-4

.......more details

Programming Instructions Instructions de programmation

ME123-YELLOW-LH

Miller Edge Yellow Left Hand Outlet 2-Wire 2" wide x 1-1/2" high Sold by the Foot

Electromechanical slide in edge for sectional doors and sliding gates.
Touch sensitive singaling allows for immediate stopping and reversing of motion
Temperature range: -30F to 155F
Lead wire: 22 gauge universal
Sensitivity: nominal 6-8 PSI
2 wire NO configuration

.......more details

Installation Manual Worksheet Sell Sheet

13-10024

LiftMaster Limit Nut

Limit nut / cam for commercial door and gate operators

CABLE-15

Manaras 15ft coax cable extension with BNC connectors

Used on Radio-15 to extend antenna

RADIO-29

Manaras Commercial Receiver Antenna

Commercial receiver coaxil antenna

831-RJ

Allstar 1-Door O/C/S Receiver in Oil Tight Case (JIC) 107478 318 MHz *** To extent of inventory

Three channels - three relay outputs
Oil-tight JIC ABS case
Terminal strip for wiring
Wire whip antenna with "F" connector
Compatible with Allstar Classic Allister and Pulsar dipswitch transmitters and MVP quik-code transmitters
Power: 24 VAC/VDC

.......more details

Programming Instructions - Dip Switch Version Programming Instructions - Learn Button Version

DT2A

Linear 2-btn Delta3 Transmitter 310 MHz (DNT00017A)

Activates two Delta-3 receivers independently
Test/operate LED
Visor mounting clip supplied
Power: 9-volt battery
Codes: 256 (set by dip switches)
RF frequency: 310 MHz

.......more details

Programming Instructions

4006-6FT

Aluminum Retainer only for Light Brush 6' Long 45 degree

For angle application (45 degree)
For use with Light Brush or Vinyl Insert.

1003-1-5/8-16'

Aluminum Bottom Retainer L-Shaped

For 1-5/8" thick doors.

27-20301

Truck Door Cable Drum Curbside (RH) for Todco Roll-Up Doors

Cast aluminum construction
Large die cast cable drums are grooved to prevent cables from binding or wearing prematurely.
Angle of cable slot determines left or right drum.
Holds up to 130" door cable
Cross Reference: T #59033-1 T #59129-1 W #4013 330100

EP2979

Exhaust Port 3" with latch long barrel

For use on insulated door panels up to 2" thick.
Inside diameter: 3" Includes fasteners & gaskets.
Polished aluminum finish.

RS1034

Roller 3" Steel 4" stem 10 ball

Steel Roller Wheel diameter: 3"
Working length: 3.38"
Overall length: 4.75"
Box qty: 50 Box weight: 35.8 lbs (3-4-10 Steel)

25-10103

Truck Door 2" Sealed Roller Steel for Whiting Roll-Up Doors

Zinc plated finish 10 roller ball design
Shaft Length: 2.62" Overall Length: 3.41"

MP-00001

Micanan Timer to Close 24V Modification

3-button o/c/s function timer will start counting from fully open reverse and reset from any device
24V modifictation available on control circuit ( R) and ( M) and is included with the new full function smart board (E)

.243-2-R

Cut-to-Length Torsion Spring .243 x 2" Right Hand Wound White/Yellow

Priced per inch - cones sold seperately
For factory installed cones use part no. C-200-INSTALLED

25E10220

Truck Door Top Closure Plate & Slide Black E-coat finish for Whiting Roll-Up Doors

Steel construction Black E-coat finish
Included: Base plate slide bolt & flanged nut
Improved heavy-duty reinforced slide
Adjusts top panel for firm seal
Cross Reference: W #6944

LDM-1

Long Distance Module

Compatible with all door and gate operators that use 24V AC
20 mile range

UCFL-1-1/4

Self-Aligning Cast Flange Bearing Football Style 1-1/4" Bore UCFL207-20

Grey cast iron painted.
Comes with 2x set-screws
Football style 2 bolt
5-1/8" hole center to hole center distance
3500 lbs load rating

MA200

LiftMaster K1 Relay option for MA MAT and MAST Barrier Gate Operators

used with Mega Arm Barrier gate operators to control traffic lights etc

MB-01204

Micanan Electric Motor Only 1/2HP 575V 3PH

C-Flange motor fits: GT GH GHC GSD

1222_DUAL_TROLLEY_14'

LiftMaster Dual Trolley kit for 14' high door includes #41 Chain for 14ft High Door Angle tracks (2x) 14' (Actual length 227") and (1x) shaft

Provides a second drawbar-type operation on wide standard door
Includes 14ft tracks #41 chain hardware & Round Bar 1" x 20'
Works with TDC12 & TDC22 Maxum operators

D-TEK-LP

EMX Industries Low Voltage 11-Pin Single Channel - Dual Relay Loop Detector (2500-1)

Power Supply: 12-24 Volts AC/DC
Current Consumption: < 9 mA
Operating Temp: -40°F to 180°F
Surge Protection: Zener Diode /MOV
Output Relays (2): 1Amp 30 VDC
Loop Input: Transformer isolation lightning and transient protection (1)

.......more details

Manual - LP-D-TEK Spec Sheet - LP-D-TEK

29201

Doorlec Transformer 460V pr 120V sec 35VA

460V prImary 120V secondary 35VA

SETR2641AM2KP

Erone 2-Channel Mini Transmitter with Paradox Tag Black 433MHz

With built-in Paradox tag
Heavy-duty construction
Elegant & easy to carry
Unobstructed range: 656 ft (200m)
60 x 36 x 16mm (2.35 x 1.4 x 0.6in)
Two lithium batteries (CR2016) included

.......more details

Wireless System Chart

TDC7-8

Liftmaster Comm. 8FT Trolley Angle set (10-5808-P x 2) and #48 chain pack (TDC48-08) ***Actual length 131*

Double Angle Rails for doors up to 8'6" high
Includes #48 chain pack

XF208VAC12

LiftMaster 208V Transformer Kit 1200

P-8833T-OCS

Pulsar 3-btn 1-Door O/C/S Transmitter 109372-Compatible 318 MHz

Open/Close/Stop remote for 1 door
Compatible with 3-channel Allstar and MVP receivers
Portable transmitter
Easy access to battery and coding switch
Power: 9-volt battery
Codes: 6561 (set by eight trinary dip switches)

.......more details

19-50106MN

Chain # 50x106 (5-1/2') with Master Link Nickel Plated

Also known as: K19-50106MN 199023NP
Complete kit includes: #50x106 Chain master link and clip.

CCTD-04

Fuse 600VAC/300VDC Class CC Time Delay 4AMP Sold per Fuse

Sold per fuse

689-LCN

LCN Door Closer 4040-XP Aluminum Finish

Cast iron cylinder with full-complement bearing
3/4" diameter piston
Double-heat treated steel pinion journal
All-weather Liquid X fluid
LCN Patented Green Dial spring force indicator
Universal non-handed

.......more details

041-0365-000

LiftMaster Sensor Eyes and Brackets 1997-Current

For use with various LiftMaster® and Chamberlain® Belt Drive and Chain Drive Garage Door Openers; manufactured after 1997.
Complete kit includes: (1) Sending sensor eye (with LED) (1) receiving sensor eye (with LED) (2) replacement brackets and replacement hardware.
Also known as or Replaces: 041A5266-1 041A5266-3 41A5266-3 41A5266-1 12D584-1

LA412DC

LiftMaster replacement 12VDC Solar Actuator Arm

he LA412 Arm runs on 12V and connot be subbed for LA400 Arm

CP-LX900

Lynx Control Board with Cover for MDJ models

works only on MDJ (medium -Duty Jackshaft) models
UL325 compliant with B2 C2 modes
includes on-board Timer-To-Close
On-Board 372MHz radio receiver accepts 20 remotes

MDJ Installation manual

MV-00025-NEW

Micanan 32-Door O/C/S Transmitter CT-32 313 MHz New Style with Flat Buttons

Commercial / Industrial transmitter

LRS-LC

EMX Logic Controller

For use with the Loop Replacement System (LRS-C1) Magnetoresistive Vehicle Detector Control Unit
Connects two stand-alone sensors to expand the detection area
Works with LRS-DB (LRS-DB-50 or LRS-DB-100) Direct Burial or LRS-FP Flat Pack (LRS-FP-50 or LRS-FP-100)
Logic Interface allows one (1) or two (2) sensors to be connected to one (1) output
Provides six (6) selectable logic functions and two (2) separate relay outputs
A/B directional logic can be selected with an output for each direction of travel as a vehicle passes over two sensors

.......more details

751-CDN

Fasteners Self Drill & Tap Tek Screw 1/4-20 x 1" (#2PT) Canadian Steel - 1000/Bag

7/16" Head
Indented hex washer head
Max RPM = 2000
Made in Canada with Canadian Steel

OE-LHR-SET

Low Headroom Quick Close Device 2" track Sold as a Pair

Includes 1 RH & 1 LH bracket
Steel with zinc plated finish
Set includes: 1 x fastener bag 1 x stop lip bracket (L&R) 1 x LHR roller holder (L&R) and instructions
Used on torsion or extension spring doors up to 8'H
Operate extension spring doors in a minimum of 7" of headroom
Door won't go higher than top of spring shaft when door is opened.

.......more details

Installation diagram page 1 Installation diagram page 2

MOD007

Manaras Reverse Limits

Necessary feature when the opening and closing of the door corresponds to a different rotational direction than the operator

BEA-10-PSMDR2024

BEA Power Supply 100 - 240 VAC 24 VDC Output

02-101

LiftMaster Single Button Nema-1 Pushbutton Control Station

Surface mount

5009-559-PAINT

Aluminum Touch Up Paint Nail Polish Style Pebble / Kaki # 559

Glass bottle and brush applicator

PIN007

Manaras Slotted Spring Pin 3/16" x 1-1/2"

19-40240D

LiftMaster Drive Chain #40 10' Box Black Oxide

Complete kit includes: Drive Chain 10' (#40) and (2) Master Link Kits
Black Oxide coating provides corrosion resistance
Suitable for use exterior applications

.177_2"-RH

Torsion Spring .177 x 2" x 12ft RH Gold

Wire size: .177
Inside diameter: 2"
Length: 12 ft

RADIO-EM102

Manaras Mini 3-btn Rolling Code transmitter 390 MHz

Field Configurable
Hand Held or Keychain three button
Rolling Code Technology
1 Door (SD) Open/Close/Stop or Multiple Doors (MD) 1-3 single-button field selectable
Config. Trad. Comm. Sesquence or Alternating Sequence (SBC) Open/Close/Stop (with ECB)
Nema 1

.......more details

Manual

ETBHW-311-3/4HP

Doorlec 3/4 HP 115V-1Ph Waterproof Trolley OP

Trolley Industrial type operator with DC2000 Logic controller
Watertight/Dust tight

EHJW-311-1/2

Doorlec Ind Jackshaft Op. Watertight ECB 1/2 HP 115V-1Ph

Heavy-Duty Industrial Operator with Waterproof Mod. for Sectional or Rolling Steel Doors
DC-2000 logic with adjustable Timer-To-Close Delay On Reverse and Traffic Light Control (monitored board optional)
Solenoid Brake prevents coasting and secures the door when closed
TEFC (sealed) continuous duty electric motor with overload protection
Automatic Friction Clutch protects the door and operator
Self-aligning Heavy Duty sealed Pillow Block bearings on all shafts for high cycle applications

.......more details

2000Z

LiftMaster HD Roller Cage Bearing Hinge Flat Mount Both Sides Prime Coated Sold in Pairs

Heavy Duty Construction for Maximum Durability
Dependable Roller Cage Bearing Design
Even Weight Distribution
Five Times The Weight-Bearing Surface of the Nearest Large Hinge
Largest Weld Surface in the Industry
Easy to Fully Lubricate

.......more details

24856

Stanley Front Idler Kit for Chain/Cable Openers *** NLA

For Stanley Chain/Cable Openers Only
Not for Stanley Full Chain Openers
Replaces Part #920-0147

SL595103UL

LiftMaster Dual Voltage Slide Gate Op.1 HP 208/230/460V 3 Phase - Heater NOT Incl. UL325 ***NLA

UL 325 compliant system.
Power: 208/230/460/575 VAC. 3 Phase.
Accessory power: 24VAC 500mA max.
Monitored safety inputs: 3 Main Board 3 Expansion Board.
Temperature specs: Without Heater: -4°F (-20°C) to 140°F (60°C). With optional heater (HTRNB: HTR460 for 460V operators): -40°F (-40°C) to 140°F (60°C)
Gate travel speed: 12 in. per second.

.......more details

31110

Doorlec Sprocket 50B23 1" Bore KW/SS

74183

Marantec External Gate Receiver 315 MHz

Upgrade your existing gate operator to be compatible with Marantec controls such as transmitters and keyless entry systems.
315 MHz operating frequency
HomeLink compatible
Very easy installation (follow wiring diagram of gate operator)
Compatible with other operator brands
Made in Germany

.......more details

65-5209

LiftMaster Manual Hoist Mod. Kit #48 Chain Drive

This is an available factory installed modification only

RN1124-10

Roller 2" Nylon 4" stem 11 ball White 10/PKG Sold per Pack

White Nylon Roller Wheel Diameter: 2"
Working Length: 3.75" Overall Length: 4.69"
Box qty: 15 packs of 10 Box weight: 49 lbs (2-4-11 White Nylon)

MOTOR255

Manaras Electric Motor 3/4HP 120/240V 1PH

27-83190

Truck Door W-Style Track and Operator 90 x 90 Door

Includes: 1 dual spring operator 2 horizontal tracks 2 vertical tracks

TRANSF112

Manaras Transformer 575V-24V-50VA

1004-2-12'

Aluminum Bottom Retainer 2" U-Shape with Reinforcement 12 ft***Actual Length 12'2"***

For door thickness 2"

SM101

Miller Edge Signature Module for T3 Monitored Plugs w/ JB-03

Commercial signature module for use in commercial door and gate operators built after August 29 2010.
Engineered to emulate monitored pulse signal required by some commercial door operators.
LED light indicates device power or fault conditions.
Nema 4
Temperature range: -31F to 158F
5 to 40V DC

.......more details

PPV3M

LiftMaster Passport MAX 3-Button Visor Remote

Provides total control with one remote for gated communities and commercial properties.
Compatible with the PPWR Receiver for gate access control all 315MHz Security+ LiftMaster and Elite Series Gate Openers and all LiftMaster Garage Door Openers manufactured since January 1995
2x the range of standard remote controls
Narrow-band transmission on 3 simultaneous frequencies (310 MHz 315 MHz 390 MHz)

MK-01179

Micanan Telemecanique Contactor Kit 24V **use code MK-00493

LC2K1210B7 mini contactor

RBH103L5-LH

LiftMaster 1 HP 208/230/460 VAC 3 PH Comm. Hoist Op. Logic 5 Left Hand

H-style operators include a floor level chain hoist to ease manual operation in an emergency or power outage.
The operators are typically mounted to the wall when used with larger sectional overhead doors with vertical or high lift and mounted to the wall or the front of the hood when used with rolling doors and grilles.
H operators are attached to the door jackshaft to indirectly drive the door.
With the addition of the 828LM MyQ technology enables the user to monitor and control their operator and light with their smartphone tablet or computer.
Alerts can be received as email or pop-up (push) notifications on a mobile device ensuring the status of your commercial door.
Security+ 2.0™ safeguards your facility – with every click a new code is sent to the commercial door operator so the door opens only for you.

.......more details

MS-00002

Micanan Trolley Track Set 12 Ga. 9'6" (for 7' h. door) Includes 2 Angles Only

Set includes 2 tracks only
Chain NOT included

MK-00646

Micanan 9" Coax Cable for On-Board Receiver

BD3240

Piezo Warning Buzzer Alarm with Volume Control 24VAC/DC

2-1/2" long 90 DBA

10-1036-4

Whiting 2" Nylon Roller 5" Stainless Steel Shaft for Truck Doors

A Whiting original part
Stainless steel bearings stainless steel shaft

MA003

LiftMaster Electric Motor Only 1/2 Hp 24VDC BM

Same as: MA003M MA-003 MS003 20-60000-1
Used on Liftmaster Mega Arm gate operators

25-10109

Truck Door 1" Steel Roller 5" Shaft Length for Todco Roll-Up Doors ** NLA

Zinc plated Hardened shaft and raceways
Seven roller ball design

PRO-HHD-7511E-L

Micanan 3/4HP 115V 1P Heavy-Duty Jackshaft NM ECB No Eyes Left Hand

3/4 HP115V 1PH Industrial Continuous Duty Jackshaft Operator Ideal for Sectional Doors Rolling Steel
Non-Monitored logic board with integral 372Mhz radio receiver that can hold up to 20 transmitters (MK-00647/ MK-00653/ MK-00659) or 200 of the 1 channel hand held transmitters (MK-00660).
3-btn O/S/C (02-103) wall control station included
Adjustable Friction Clutch 5L320 drive belt
#50 Roller chain 18 tooth door sprocket included
Emergency chain hoist with electrical cut-off for manual operation

.......more details

Installation manual Specification sheet

HAE00061

Linear LDCO Control Board BBU Compatible *** USE HAE00077 instead

DC motors

8X118-WHITE

Fasteners Wood Screws painted White 1000/Box

Ideal for residential weatherstrip

CP-MO-12R-115/1

Lynx Electric Motor Emerson 1/2 hp 120V Instant Reverse 6 Wire *** NLA

Replaces the 4 wire AO Smith electric motor

ALUM-508

Aluminum 24" x 100' Spool Sandalwood / Sable # 508

20% thicker than the aluminum sold in retail stores (0.022" )
Gentek # 508
Reverse side is #431 Bright White

Colour chart

.319-6-RH

Cut-to-Length Torsion Spring .319 x 6" Right Hand Blue/Green

Spring wire only. Cones and Filler extra

PMR10RIT

Carlo Gavazzi Retro-Reflective Sensor with Imperial Connector

PMR series sensors have a sensing range up to 32.81 feet and a fixed sensitivity.
Immune to ambient light Selectable output function.
The plastic housing is IP 67 rated and allows cable or screw terminal connections.
Optional timing features include: Delay on operate delay on release or one shot (triggered on leading or trailing edge).
24-240 VAC or 12~240 VDC
Relay Output

.......more details

T-832-M-H

FL-Heddolf 2-btn Mini Transmitter P219-2K-311 MHz (T-832-M-S)

Open/Close mini remote for 2 doors
Keychain and 12V battery included
Compatible with Keystone T-832-H and old Allstar T-832
8 dip switch
Same as P219-2K

Manual

PPLX

LiftMaster Stand Alone Proximity Reader ** NLA

6" read range
50000 user capacity
Multiple Wiegand protocol (Sentex® 26-bit industry standard PassportTM)
Programmable as stand-alone or Wiegand pass-through
Simple-to-use handheld radio programmer (model PPRP; sold separately)
Programmable output relay (NO/NC)

.......more details

Programming instructions Sell sheet

BMBOX-HARDWARE

Complete Hardware Box for Big-Metro BMBOX

Foundation box for Big-Metro gate operator
Kit includes: (1) #60 – PMD1025.4610 – MECHANICAL STOP BOLT NUT (1) #62 – V12X30.5102 – BOLT MECHANICAL STOP (1) #63 – D12B/5110 – NUT MECHANICAL STOP (1) #61 – D18.5110 – NUT M18 (1) #52 - 5PMCS1.4630 – BALL BEARING (1) #58 – PPD2288.4540 – NYLON HINGE COVER (2) #65 – 16X1.5124 – SCREW FOR LID COVER (4) #64 – D.12.5110 – NUT M12 LOCK NYLON

RA-AD-WWS-MULTI

Lynx Wireless Wall Station AD455 372 MHz

Wireless for easy installation anywhere
Controls door open-close light on-off
Programmable pet opening (Opens to a pre-selected height of 6"-30")
Vacation Slide-Lock: Disables remote transmitters keyless entries and wall stations.
10-second closing safety delay
Transmitter program button

.......more details

Programming Instructions Compatibility chart

CP-LX720

Lynx 3-btn O/C/S Transmitter 372 MHz for Commercial Op. with UL325 Board

UL325
Works on the new Lynx commercial operators
Open Close Stop transmitter
Not compatible with the 372MHz residential operators.

Programming instructions Compatibility chart

22306

Programmable 7-Day / 24 Hr Timer

VBELT_4L400

Lynx VBelt 4L 40"

Fits Lynx MCJH operator

MA116

LiftMaster 17 ft Aluminum Arm Round Yellow/Black Stripes ***NLA Repl. by MA116RDOT

Used on Mega Arm gate operators
Requires counterweight model MA117 - sold separately.
Size: 17 feet long x 3" round
Arm opening area: 14ft (end of cabinet to arm tip)
Replaced by MA116RDOT

K72-12487

LiftMaster Limit Shaft Kit MT BMT MJ mechanical operators

For models MT BMT MJ mechanical operators
Includes limit shaft bearings limit nut sprocket. RPM sensor roll pin & e-ring

BK313

Jamb bracket J-13 #13 12 gauge

Sold by the piece
Height 5.25" Length 1.9" Width 2.45"
Bright zinc plated 12 gauge steel
2" long track mounting slot
manufactured to accept ¼” fasteners when attaching to the track and 5/16” to lag to the wall.

SPREADER003

Chain Tensioner for 1-1/4" / 1-1/4"

Chain spreader for installation with 1-1/4" operator shaft and 1-1/4" door shaft
Designed to keep tension on the chain when used with a wall mount commercial operator. It helps avoid premature wear on the door shaft bearing and commercial operator output shaft bearing

Installation instructions

Z9200

Cable Snubbers Sold as a Pair

Prevents slack from forming in cables
Sold in pairs

Installation Instructions

MWR12

Miller Edge 1-Channel Receiver RF 318 MHz *** To Extent of Inventory

��The MWR12 receiver is designed to receive information from the transmitter and relay it to the motor to stop or reverse motion if the edge comes into contact with an obstruction.
Power requirements: 10 to 40 VDC 10-30 VAC
Output: dry relay contact N/O and N/C 1A @60VAC
Operating temperature: -40C to 60C
Maximum operating distance: 100ft
Electrical configuration: optional N/O or N/C

.......more details

Installation Manual Sell Sheet

029-98200

W-Style Replacement Door White Stainless Steel Package 029-98200

Replacement door size between 96-1/4" - 98" wide x 90-100" high
Painted white
Stainless steel package
Includes Hinges Rollers and Cable

02-410B

LiftMaster Commercial Key Control Station Open-Close and Off with Stop Button and BEST Cylinder

Outdoor Surface Mount Nema 4/12 station
Standard key cylinder is replaced with BEST cylinder
Open/Close spring return to center (off)
Key removable in center position only
With Stop button

59LMC

LiftMaster Outside Keyswitch ** To Extent of Inventory

12 tumblers provide double locking action
Self cleaning barrel weather-resistant aluminum plate
Cannot be shorted out from exterior with key
One "NO" contact used to activate the door operator
Includes two keys

Installation Manual

F539.90000

Bircher Infrared Programming Remote RC Duo 2 Red

Conveniently program all parameters from ground level
Backlighting of specific buttons provide instant confirmation of programmed parameter & value
Configure any Hercules 2 Hercules 2s Reflex 2 or UniScan sensor with the same remote
Multiple address feature allows programming of a single sensor even in close proximity to other sensors
Large highly visible buttons
Automatic off feature conserves battery life

.......more details