Devanco Canada

 
User Name:
Password:
Remember Me:
Forgot your password
Request a Login

HAML-WIRING-HARNESS

GDI Wiring Harness Length Per Foot G3343

  • If over 10' is required
PRO-J-10011-U-LH

Micanan 1HP 115V 1P Jackshaft Monitored ECB N1 Eyes Left Hand

  • On board receiver with antenna
  • Continuous duty industrial motor with overload protection
  • Heavy duty 5L V-belt
  • Adjustable friction clutch
  • Solenoid brake (optional PRO-JB) recommended for large doors
  • 3/4" permanently lubricated & sealed precision ball bearings on pulley shaft
  • .......more details
.306-2-R

Cut-to-Length Torsion Spring .306 x 2" Right Hand Wound Red

  • Priced per inch
  • For factory installed cones priced seperately - use part no. C-200-INSTALLED
ME117-C7

Miller Edge PVC Mounting Channel Sold by the Foot

PRO-J-5083-U-LH

Micanan 1/2HP 208V 3P Jackshaft Monitored ECB N1 Eyes Left Hand

  • On board receiver with antenna
  • Continuous duty industrial motor with overload protection
  • Heavy duty 5L V-belt
  • Adjustable friction clutch
  • Solenoid brake (optional PRO-JB) recommended for large doors
  • 3/4" permanently lubricated & sealed precision ball bearings on pulley shaft
  • .......more details
PRO-GT-10043-U

Micanan 1HP 460V 3P Worm Gear Trolley Operator N1 Eyes Monitored ECB

SPRAY-468

Aluminum Touch Up Spray Paint 350g Nutmeg / Brun Muscade #468

  • 350g can
25-60407

Truck Door Rear Frame Conversion Bulk Kit with 7" Header 2" Wide

  • Converts swing doors to roll-up doors by removing the old swing doors and weld conversion corner post and header in its place
  • Vehicle is now ready for roll-up door installation
  • Corner post has added lip length to allow easier weld during installation
  • Steel construction .125 thick
  • Each bulk kit includes two (2) corner posts and one (1) header
  • Plain finish
  • .......more details
PRO-APTB-5053-U

Micanan 1/2HP 575V 3P Apartment Trolley Operator With Brake N1 Eyes Monitored ECB

  • Low clearance design for APT applications (9.5")
  • Door speed: 12" per second
  • Monitored board
PRO-T-7583-U

Micanan 3/4HP 208V 3P Trolley Operator N1 Eyes Monitored ECB

  • Designed for use on commercial / industrial sectional overhead doors with standard lift tracks.
  • #41 roller chain on 3/4 HP models
  • Monitored board
PRO-LT-5021-U

Micanan 1/2HP 230V 1P Commercial Trolley Operator N1 Eyes Monitored ECB

  • Designed for use on commercial doors with standard lift tracks that require no more than 15 cycles per hour
  • Trolley track for door up to 12ft standard upcharge for 14' & 16'
  • Door speed 9 inches per second
  • UL325
  • On-Board receiver holds up to 20 transmitters
1004-134-16'

Aluminum Bottom Retainer 1 3/4" U-Shape with Reinforcement 16 ft***Actual Length 16'2"****

  • For door thickness 1-3/4"
2200-926

Linear Gear Reducer 60:1 Models SWR SWD

DM120-125-T/FORCE

Cable Drum High Lift 120" D575-120-1-1/4" Pair Torque Force

  • 120" High Lift aluminum die cast alloy cable drums.
  • 3/8"-16 x 2" hardened cup point set screws installed with red heads.
  • Pair includes: (1) LH and (1) RH. Color coded: Red=LH and Black=RH.
  • Maximum high lift: 120".
  • Maximum door height: 144" + High Lift.
  • Rated lift per drum: 500 lbs.
  • .......more details
SRB-1

Standard Riser Bracket for 6" Above Dock or Less 1"

  • Standard 1" Riser Bracket for 6" Above Dock Door or Less
  • Also available with 2" 3" & 4" Extensions or with Cutout - Call for More Information
M2818

Molded Rubber Bumper Black 18" L x 8" W 2" Projection 2-Hole Sold Individually

  • Manufactured from reinforced prime rubber
  • Rectangular horizontal mount
  • Ideal for light traffic loading docks.
  • Molded bumpers are molded in one piece and will not warp rust rot or harden.
  • Perfect protection for in-plant wall protection from forklifts and other material handling vehicles
  • Bumper comes with 2 pre-drilled countersunk mounting holes drilled to accept 3/4" anchor bolts
  • .......more details
STRUT-2-1/4-9'-NH

Door Strut 2-1/4" Non Hemmed 9 ft Long *** To Extent of Inventory

  • Reinforcement bar 2-1/4"
  • 20-GA
TB612-24SF

Steel Faced Laminated Bumper Black 12" x 24" 6 3/4" Projection Horizontal Installation

  • Used on docks where excessive friction from up and down trailer movement occurs (yard jockeys air ride trailers etc.).
  • Can be used in material handling application where medium to heavy dock protection is required
  • “Gliding” heavy-duty steel face is 3/8” thick and independently anchored with elongated holes to face of bumper allowing bumper to compress AND offer high surface abrasion resistance
  • Rubber pads laminated between steel angles and secured with 3/4” rods
  • Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
  • Wall mounting hole size is 7/8” diameter.
  • .......more details
HINGE-611-PCG

Powdercoated Hinge #6 x 11 gauge Grey ** To Extent of Inventory

  • Heavy Duty 11 gauge offset hinge #6 - 0.81 lbs
  • Powdercoated Grey
  • For use with 7/16" stem rollers
K20-1050C-2TLP

LiftMaster Electric Motor 1/2 HP 115/230V 1Ph TEFC Logic

MM-00035

Micanan Chain Keeper

3BLM

Exterior Control Station 3 Button N4 with Mortise Lockout in Metal Enclose

  • Open-Close-Stop
  • Dimensions: 7" h x 2-3/4" w x 3-1/2" d
  • Exterior surface mount
2950-0003

3/64" Sleeve ONLY 100/pkg

  • Aluminum sleeves only 100 per pack
  • Stops are not available in this size
MK-00646

Micanan 9" Coax Cable for On-Board Receiver

FMB01DW24

Timer Multifunction 11-Pin

  • Carlo Gavazzi multi-function timer
  • Time range 0.05 s to 300 h
  • Knob selection of time range
  • Knob adjustable time setting
  • Knob selection of operating mode (6 functions): A - delay on operate B - symmetrical recycler OFF first B2 - symmetrical recycler ON first C - signal ON/OFF delay D - delay on release E - interval
  • Manual start
  • .......more details
DM120-T/FORCE

Cable Drum High Lift 120" D575-120-1 Pair Torque Force

  • 120" High Lift aluminum die cast alloy cable drums.
  • 3/8"-16 x 2" hardened cup point set screws installed with red heads.
  • Pair includes: (1) LH and (1) RH. Color coded: Red=LH and Black=RH.
  • Maximum high lift: 120".
  • Maximum door height: 144" + High Lift.
  • Rated lift per drum: 500 lbs.
  • .......more details
22-01184

Truck Door Three Whole Hinge Utility Style

  • Aluminum Extrusion
  • Cross Reference: Utility #3-4100-0022
E/BLOP/122

Automatic Systems Red Arm Light - 2 Sets

  • Increases visibility of the arm on BL229 gate operator
DS350

Heavy-Duty Commercial Non-Insulated Rollup Sheet Door with Interior Slide Locks

  • Heavy-duty Model DS-350 has statewide Florida product approval for wind load protection up to 190 mph.
  • This door is ideal for commercial applications with openings up to 16’ wide by 16’ high.
  • Heavy-duty 13-gauge guides attach to 8-gauge wall angles to give maximum wind load protection.
  • Installation to masonry or steel is quick and simple with no special preparation or overhead tracks needed.
  • A wide selection of colors to choose from
  • Made to Order
  • .......more details
9004-10

Excalibur Threshold Kit 10'2" x 4" W Solid Aluminum *** Price by Quote Only

  • Stands 1/2" tall
  • Built with 6061-T6 solid aluminum to withstand extreme weight and excessive traffic conditions.
  • Two-way fastening/seal system won’t shift buckle or leak
  • Top V-groove design provides for skid proof protection and improved tire traction on loading docks and incline ramps.
  • The 1/2" diameter wire access port makes it easy for sensor and security installations.
  • The kit comes complete with pre-drilled counter sink holes 3/8" anchors and sealant.
  • .......more details
5001-8-WHITE

Residential Side & Top Weather-Strip 8' Long - White

  • Painted aluminum retainer with flexible dual fin vinyl.
  • Residential use.
MX-00033

Micanan Trolley Arm Assembly

  • Kit includes: MM-00031 wall L-bracket (1) MM-00032 trolley arm 105 degrees (1) MM-00033 trolley extension arm (1) MM-00034 trolley arm sliding bracket (1) MO-00004 trolley arm compression spring (1) and MR-00009 red rope c/w handle and warning label (2)
3002-CUT-LENGTH

Gum Hose 1/2" ID Sold per Foot

  • 1/2" inside diameter
  • Installed in bottom "U" rubber for use as a safety edge
K94-33961

LiftMaster Wire Harness Kit MT MJ MH

50-ALMARM-DOT

LiftMaster 15 ft Aluminum Barrier Arm Square White Aluminum with Red/White Retro-Reflective DOT Tape

  • Used on BG770
  • Arm adaptor included
  • 15' x 2.5" square arm
  • Replaces 50ALUMARM
V1102-BLACK

Replacement Vinyl Only for 1102-Black 200ft Roll

  • Sold in 200 ft rolls only
MK-00660

Micanan 1 Channel Hand Held Transmitter (for APT applications) Sold Individually

  • Sold in packs of 10. Priced per transmitter
25-10109

Truck Door 1" Steel Roller 5" Shaft Length for Todco Roll-Up Doors ** NLA

  • Zinc plated Hardened shaft and raceways
  • Seven roller ball design
K10-37955

LiftMaster Chain Guard with Mounting Hardware HCT

PRO-LT-5011-U

Micanan 1/2HP 115V 1P Commercial Trolley Operator N1 Eyes Monitored ECB

  • Designed for use on commercial doors with standard lift tracks that require no more than 15 cycles per hour
  • Trolley track for door up to 12ft standard upcharge for 14' & 16'
  • Door speed 9 inches per second
  • UL325
  • On-Board receiver holds up to 20 transmitters
K74-18379

LiftMaster Hall Effect Sensor for SL575 SL585

  • Hall effect assembly for SL540/570/580/575/585 operators with GL Board
  • Includes: screws flat washers lock washers and replacement instructions
  • Same as: G74G0487
  • This part has a short lead-in wire and will not work with SL590 or SL595
BL-BAG-1A

Barlock Hardware Bag Only for Doors 12ft and Under

  • Does NOT include the locking bars
  • Up to and including 12ft
  • Kit includes lock spacers and fastereners
WE684

Omni Electric Motor TEFC 1HP 208V – 460V 3PH D56C

  • C-Flange
BL229-GATE-OP

Automatic Systems Universal Perimeter Raising Barrier Gate 120V

  • Highly configurable barrier designed for many applications and environments
  • Numerous accessories offered allowing to meet various installation constraints and various requirements in terms of security
  • Barrier equipped with control unit allowing operation perfectly adapted to every situation
  • Change of configuration or operation possible even after initial installation of the product
200BL-10

2" Light Brush Insert 10ft Long

  • Polypropylene bristles
  • Same as MS1703-120
BCH753L5-RH

LiftMaster Hoist Op. with Carwash Mod. 3/4 HP 208/230/460 VAC 3 Ph L5 Right Hand ***Replaced by CRBH753L5-RH

  • Industrial Duty Hoist Operator with Damp Environment modification
  • External brake included
  • Comes with CPS-UN4 photoeyes
12-1028

Strip Curtain Clear Smooth Low Temp. PVC 8" wide Cut to Length

  • 8" wide .080 thick
  • Cut-to-length and pre-punched
SPRING-FILLER

Spring Filler for 5-1/4" and 6" Torsion Springs Sold with Pre-Cut Springs only Sold per Inch

  • Required when ordering pre-cut torsion assemblies with cones
801-300-001-00

Equinoxe Long Range Receiver 1-Door 433 MHz Pre-2016 *** To Extent of Inventory

  • 1000 ft range
  • Old generation - prior to 2016
CPS3-N4

LiftMaster Option Card with CPS-UN4 Eyes for applications requiring 2 sets of photocells

  • For applications requiring two sets of photoeyes in a damp location
  • Range up to 45ft water dust and corrosion proof eyes (Nema 4x rating)
  • Works with Logic 3 4 5 Commercial Operators
  • Includes Durable steel brackets - floor or track mounting
  • Kit Inludes one set of CPS-UN4 and one CPS3 card ( CPSIII )
28002

Doorlec Flange Bearing F-360-13 5/8" Hole

  • Fits model LJ
37516S

Genie Belt only for 8ft Door

  • Replacement belt only for 8ft door
  • Fits Genie model Destiny 1200
CS303-FP-50

EMX Car Sense Direct Burial Sensor Flat Pack 50ft ** Replaced by LRS-FP-50

  • Lead probe ONLY. Requires the CS303-C-1 detector.
  • Easy installation above or below ground
  • Ignores cross traffic in tight spaces with DETECT-ON-STOP™ feature
  • Sensitivity display
  • Single cut installation with flat pack model
104083

Marantec Reference Switch for Belt and Chain Rails

  • This part works with the positioning tab and motor to determine the open & close limits of the actual garage door.
CPS3CARD

LiftMaster Option Card Only (41K0811)

  • Works with all commercial Logic versions L2 L3 L4 L5
  • Use with CPS-U to add a second set of eyes to the operator
  • Allows activation of Timer-To-Close without CPS-U
  • Simply plugs into Logic board
  • Cut resistors on JU1 & R16 to activate timer feature
  • Same as 041K0811
  • .......more details
ME123-M-BLK-RH

Miller Edge Black RH 4-Wire Monitored 2" wide x 1-1/2" high Sold by the Foot

  • Electromechanical slide in edge for sectional doors and sliding gates.
  • Touch sensitive singaling allows for immediate stopping and reversing of motion
  • Temperature range: -30F to 155F
  • Lead wire: 22 gauge universal
  • Sensitivity: nominal 6-8 PSI
  • 2 wire NO configuration
  • .......more details
19-5116

LiftMaster Trolley Roller Chain Pack #41 for 16ft Door

  • For 3/4 & 1 HP trolley operators
19-5118

LiftMaster Trolley Roller Chain Pack #41 for 18ft Door

  • For 3/4 & 1 HP trolley operators
41A8094

LiftMaster Residential Door Arm Kit Straight and Curved Arms

  • Kit contains: Straight arm Curved arm and hardware bag
K20-1050C-2T

LiftMaster Electric Motor 1/2 HP 230V 1 ph CF

  • For gate op. SL580-5011
CABLE_316SS5000

Cable 3/16" 7x19 5000' Stainless Steel ** Price on request

K74-18382

LiftMaster Hall Effect Sensor Assembly **to extent of inventory

  • Formerly 76-G0541 G76G0541
  • For SW470 with GL or S3 Board SW490 with GL Board
124844

1" Nylon Bushing

MD-00034

Micanan Connecting Link #410

OMJ-6112-ECB-L

Manaras Medium-Duty Jackshaft Operator 1/2 HP 120V with Electronic Circuit Board Left Hand

  • Designed for use on standard high and vertical lift sectional doors
  • Can also be used on small rolling doors and grills
  • Single phase intermittent-duty motor has instant reverse and internal automatic reset thermal overload protection
  • Mechanical brake
  • Floor level disconnect mechanism which must be engaged for manual push-up operation
  • 14 cycles per hour 50 cycles per day
  • .......more details
MC00012

Micanan Gear Reducer PRO-GOHD BHC 63 40:1 56C

MAREDLED17

LiftMaster Red LED Light Stip 13ft Long

  • Provides LED visibility on both sides to 17 ft. arm.
420001

Linear Wireless Keypad Multi-Code 300 MHz

  • Compatible with 300 MHz Multi-Code receivers
  • 4-digit access code
  • Backlit keys
  • Weather-resistant keyless entry station transmitter
  • Easy access to battery
  • Power: 9-volt battery
  • .......more details
DXR-702

Linear 2-Channel Digital Receiver 315 MHz *** Discontinued

  • A digital receiver with an isolated relay output designed for use with Linear's DX Format transmitters.
  • When the receiver detects a signal from a transmitter programmed into its memory the relay output activates.
  • The relay has four optional output configurations.
  • 32 transmitter capacity
  • RF activity indicator
  • Quick-learn programming
  • .......more details
MHH-002

Magnetic Handle Set Black Set of 2

  • Decorative handles only
  • Black flexible magnetic material with deep embossed design
  • Mounts flush on door
  • Sold as a set of 2 handles
SGP-353-2-575/3

Doorlec Gate Master 2 HP 575V/3P with TEFC Motor

  • Post mount heavy-duty industrial slide gate operator
  • Max. gate weight: 2500 lbs
  • Gate travelling speed: 45 ft / minute
  • 175 watt heater included
MJ00004

Micanan Clutch Plate Aluminum 3/4" ID

1003-3"-PER-FT

Bottom U-Rubber 3" Black Sold per Foot

MT-UHF-0-0

AWID Long Range Metal Mount Tag

  • For use with LR-2000 and LR-3000 readers
  • Operating temperatures from -58°F to 185°F (-50°C to +85°C)
  • Reading Distance up to 25 feet
  • Battery not needed passive tag
  • Passive RFID technology with excellent-price-to-performance ratio
  • Proprietary encryption for protection of card data
  • .......more details
GH4416-05-R

Green Hinge #5 12-ga Right Hand *** to extent of inventory

  • A unique spring-loaded hinge that allows automatic adjustment of the door.
  • Provides a close tight seal of the door to the building
  • Green powder coat finish
  • For doors up to 20ft
S142ARNN924

Carlo Gavazzi Amplifier 24V

  • Processor controlled amplifier for one set of photoelectric sensors type MOFTR.
  • 11-pin circular plug for easy connection.
  • 8A SPDT relay output NPN/ PNP transistor output or alarm output.
  • Diagnostics for sensor test during operation.
  • Alignment help via LED or alternation of alarm output.
  • Level indication for dirt accumulation.
  • .......more details
LA400DC

LiftMaster Primary Actuator Arm for Single Gate Applications 12VDC New Version

  • New version has red stripe but will still work on the old LA400
HD3115

Commercial Slide Lock for 3" track Long Throw 4" travel

  • Offset from inside face of door to lockbar: 1/2"
  • Bright zinc plated steel with spring actuated lock bar.
  • 4" of travel.
MA013

LiftMaster Shear Pin #6 (Standard)

  • For barrier gate operator models: MADCBB MATDCBB MASDCBB & MASTDCBB
  • Use Shear Pin #7 ( MA0137 ) if hole shows sign of wear
1104-8'-DK-SAND

Residential Side & Top PVC Weather-Strip with cap 8' Long - Dark Sandstone (DDG)

  • Garaga dark sandstone rigid vinyl retainer with Garaga dark sandstone flexible vinyl seal.
  • Dual fin vinyl.
  • Comes with cap to hide screws.
156871

Decorative Hinge Yorktown Style 16" Stamped Steel sold per piece

  • 16" hinge strap only
  • Black stamped steel
  • Mounting hardware sold separately
  • Sold per piece
41A5507-B

LiftMaster Receiver Logic Board for 2500 (390 Mhz) ** Discontinued

  • With end-panel
  • Also known as 41A5507 41A5507B
EP2986

Exhaust Port 5" non latching long barrel

  • 5" inside diameter 2" sleeve - non latching.
  • Includes fasteners & gaskets.
  • Polished aluminum finish.
14-J

Rolling Steel 3" Flat Endlock

  • Endlocks are riveted to curtain slats ends of every other slat to prevent slats from shifting laterally and to prevent curtain wear in guides.
  • Continuous endlocks are both ends of every slat.
  • Rivets included with endlocks
GH753-L5

LiftMaster Gearhead with Brake 3/4HP 208/230/460V 3P L5

  • Gearhead style commercial door operators employ lubricated gears for heavy industrial high cycle applications.
  • GH-style operators include a floor level chain hoist to ease manual operation in an emergency or power outage.
  • Hoist wheel is easily moved to Right or Left hand side of unit eliminating the need to order right or left hand mounting.
  • MyQ Technology enables you to securely monitor and control your facility operator with your smartphone tablet or computer. Internet Gateway 828LM required.
  • Security +2.0 radio receiver safeguards your facility - with every click a new code is sent to the commercial door operator so the door opens only for you.
  • Timer-To-Close: Conveniently and confidently closes the commercial door automatically after a predetermined amount of time has elapsed for added security and peace of mind.
  • .......more details
GH751-L5

LiftMaster Gearhead with Brake 3/4HP 115/230V 1P L5 ***No Longer Available

  • Gearhead style commercial door operators employ lubricated gears for heavy industrial high cycle applications.
  • GH-style operators include a floor level chain hoist to ease manual operation in an emergency or power outage.
  • Hoist wheel is easily moved to Right or Left hand side of unit eliminating the need to order right or left hand mounting.
  • MyQ Technology enables you to securely monitor and control your facility operator with your smartphone tablet or computer. Internet Gateway 828LM required.
  • Security +2.0 radio receiver safeguards your facility - with every click a new code is sent to the commercial door operator so the door opens only for you.
  • Timer-To-Close: Conveniently and confidently closes the commercial door automatically after a predetermined amount of time has elapsed for added security and peace of mind.
  • .......more details
.283-2-5/8-RH-C

Torsion Spring .283 x 2-5/8" x 144" RH Coated ** Price by Quote Only

  • Black Oxide coating
  • Wire size painted on spring
  • Wire size: .283 ID: 2-5/8" Length: 12 ft
.225-2-5/8-RH-C

Torsion Spring .225 x 2-5/8" x 144" RH Coated ** Price by Quote Only

  • Black Oxide coating
  • Wire size painted on spring
  • Wire size: .225 ID: 2-5/8" Length: 12 ft
BK101/PR

Spring Anchor Bracket USA 8-Gauge sold as a pair

  • Universal spring anchor brackets - Residential/Commercial
  • Centerline adjustment: 3-5/16" to 6-3/4"
  • Bright zinc plated 8 gauge steel
  • No bearing
  • Bearing R5110 sold separately
44-60-240

Extension Spring 10' Door - 240 lbs Silver ** By Quote Only

  • Clipped ends
  • 44" long 60" stretch 240 lb load
BOARD066R

Manaras Replacement Power Board ***No Longer Available

  • Used on all Manaras circuit board type operators
CH753L5-RH

LiftMaster Hoist Op. with Carwash Mod. 3/4 HP 208/230/460 VAC 3 Ph L5 Right Hand

  • Industrial Duty Hoist Operator with Damp Environment modification
  • Brake not included
  • Comes with CPS-UN4 photoeyes
Q222

LiftMaster Control Board for MIR-1 (K001A5868) ** NLA

  • For Miracle-One single operator - one arm
  • Same as K001A5868
G5MC-B

Skylink 1-Button Universal Keychain Remote with Bracket Black ***Discontinued

  • Operates most national brand garage door openers up to 2010 (see compatibility chart).
  • Small enough for carrying in a pocket or purse.
  • Fits in any new car remote housing compartment.
  • Ideal for convertibles motorcycles and bicycles.
  • Operating range of 100 feet and more.
  • 12-volt alkaline battery included.
  • .......more details
.187-2-R

Cut-to-Length Torsion Spring .187 x 2" Right Hand Wound

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-200-INSTALLED
MR00007

Micanan Brake Disconnect Cable 1/16" x 12"L c/w Cable Stop

  • 2 Required per operator
2200-030

Linear Limit Nut

  • Used on various Linear Gate operators
MGR20-Y-2U-04

Miller Edge Sensing Edge Round Yellow 2-Wire Universal Outlet 4ft Long

  • Electromechanical edge for standard 2" round or square frame sliding sing and bi-part gates.
  • 3-sided activation allows for immediate stopping or reversing of motion
  • Contours to round or square posts.
  • Temperature range: -30F to 155F
  • Lead wire: 18 gauge 2ft length
  • Sensitivity: nominal 6-8 PSI
  • .......more details
CLUTCHPAD007

Manaras Clutch Pad 1-3/4" ID 5" OD

124772

Roller 3" UHMW Plastic 7-1/4" Stem Sealed Bearing