Devanco Canada

 
User Name:
Password:
Remember Me:
Forgot your password
Request a Login
Home
RB709U-NB

Linear GTO Garage Door Receiver Adapter Mighty Mule

  • The RB709 Garage Door Opener Adapter enables the Mighty Mule transmitters to open and close almost any garage door opener
  • Made to be used with the FM134 (two button) and the RB743 (three button) remote control transmitters or F310 Keypad
  • Easy to install with almost any garage door opener
  • One RB709 is needed for each garage door opener that will be controlled by the Mighty Mule transmitters
MK-00031

Micanan Transformer 230V-24V-40VA

.375-334-L

Cut-to-Length Torsion Spring .375 x3-3/4" Left Hand Wound Yellow/Green

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-375-INSTALLED
ALUM-513

Aluminum 24" x 100' Spool Moonlit Moss / Poussiere de Lune # 513

  • 20% thicker than the aluminum sold in retail stores (0.022" )
  • Gentek # 513
  • Reverse side is #431 Bright White
Colour chart
ALUM-5P6

Aluminum 24" x 100' Spool Iron Ore / Minerai de Fer # 5P6

  • 20% thicker than the aluminum sold in retail stores (0.022" )
  • Gentek # 5P6
  • Reverse side is #431 Bright White
Colour chart
SC-8

Wheel Chock SC-8 Aluminum

  • "Claw" Like Bottom Assures Dependable Grip on Any Surface
  • Chock Fits Snug Under Tire Contour for Maximum Holding Power
  • Often Preferred For Snow and Ice Conditions
  • Light Weight and Reliable
  • Size: 7" wide x 11-1/2" long x 8" high
42GRR-9001

Allen Bradley Series 9000 Photoelectric Sensor Thru-Beam Receiver Unit

  • nput: 20-40VAC 10-55VDC 4VA
LB1012-18

Laminated Bumper Standard Black 12" x 18" 10" Projection Horizontal Installation

  • For use in low to medium traffic loading docks in factories and warehouses.
  • Can be used as rub rails at the sides of truck wells
  • Fabric reinforced rubber pads cut from recycled truck tires.
  • Rubber pads laminated between steel angles and secured with 3/4” rods
  • Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
  • Wall mounting hole size is 7/8” diameter.
    • .......more details
LB912-24

Laminated Bumper Standard Black 12" x 24" 9" Projection Horizontal Installation

  • For use in low to medium traffic loading docks in factories and warehouses.
  • Can be used as rub rails at the sides of truck wells
  • Fabric reinforced rubber pads cut from recycled truck tires.
  • Rubber pads laminated between steel angles and secured with 3/4” rods
  • Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
  • Wall mounting hole size is 7/8” diameter.
    • .......more details
LB812-36

Laminated Bumper Standard Black 12" x 36" 8" Projection Horizontal Installation

  • For use in low to medium traffic loading docks in factories and warehouses.
  • Can be used as rub rails at the sides of truck wells
  • Fabric reinforced rubber pads cut from recycled truck tires.
  • Rubber pads laminated between steel angles and secured with 3/4” rods
  • Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
  • Wall mounting hole size is 7/8” diameter.
    • .......more details
8065

LiftMaster Contractor Series 1/2 HP AC Chain Drive Garage Door Opener **DISCONTINUED

  • MyQ® Technology enables you to securely monitor and control your garage door opener and houselights with your smartphone tablet or computer.
  • 1/2 HP AC motor with industrial-strength chain drive provides steady performance and lifting power.
  • Security+ 2.0™ safeguards your household – with every click a new code is sent to the garage door opener so that the door opens only for you.
  • The Protector System® has safety sensors that project a light beam across the garage door opening automatically reversing the door if anything interrupts the beam.
  • Comes with: 1-Button Remote Control (891LM) Door Control Button (883LM)
LIMIT-SHFT-ASY-XP

Lynx Complete Limit Shaft Assembly for Explosion Proof Op.

  • Special order
  • Includes bearings cams and sprocket
HBS23LU

Stainless Steel Low Headroom Bottom Fixture 2-3" Door 2-3" Track Single End Stile Sold per Pair

  • Manufactured with Heavy Duty 12 ga. Rust-Proof 304 Stainless Steel
  • Laser Cut for a Clean Finish
  • For Low-Headroom Track
  • For 2" or 3" Doors
  • Fits 2" or 3" Track
  • Single End Stile
    • .......more details
CHK-991

Chain Hoist Keeper

  • Chain hoist keeper is not the same as the chain keeper
MR00006

Micanan Hand Chain Sold by the Foot

  • DOOR HEIGHT X 2 LESS 4 FT
CF-101-12

Commercial Side & Top Weather-Strip 12' Long Aluminum / Vinyl

  • Same as Garaga CF101
CRBH751L5-RH

LiftMaster 3/4 HP 115/230 VAC 1 PH Commercial Hoist Operator Logic 5 with Carwash Modification

  • H-style operators include a floor level chain hoist to ease manual operation in an emergency or power outage.
  • The operators are typically mounted to the wall when used with larger sectional overhead doors with vertical or high lift and mounted to the wall or the front of the hood when used with rolling doors and grilles.
  • H operators are attached to the door jackshaft to indirectly drive the door.
  • MyQ® Technology enables you to securely monitor and control your facility operator and lights with your smartphone tablet or computer for greater peace of mind.
  • Alerts can be received as email or pop-up (push) notifications on a mobile device ensuring the status of your commercial door.
  • Security+ 2.0™ safeguards your facility – with every click a new code is sent to the commercial door operator so the door opens only for you.
    • .......more details
CarWash Modification
MOD012

Manaras Non-Resettable Counter Modification Inside Control Box

  • An electromechanical counter is activated to count each complete door cycle.
LVB420-11SF

Steel-Faced Laminated Bumper Black 4" Projection Vertical Installation 20" x 11" Sold Individually

  • Used on docks where excessive friction from up and down trailer movement occurs (yard jockeys air ride trailers etc.).
  • Can be used in material handling application where medium to heavy dock protection is required.
  • 5/8" anchor bolts mounted through pre-drilled holes into dock or can be welded to curb angle.
  • Steel face is 3/8" thick heavy duty high carbon steel that is mounted over a laminated dock bumper.
  • Plate to be welded to 2 or 3 steel support brackets which are to extend back to the 3/4" supporting rods.
  • Brackets to be punched with elongated holes to allow steel face to "float" upon impact.
    • .......more details
BK023/PR

Commercial 3" LHR Bottom Brackets Sold as a Pair (L & R) **** Temp Unavailable - Indefinite ETA

  • Same as BB-6-3 reinforced c/w cotter and clevis pins
  • Use with: 3" straight track
  • Sold as a pair (includes one left and one right).
50195

Doorlec Front Idler Assembly with Shaft 41B9 Oilite Trolley Models

  • Fits all Doorlec commercial trolley operators
  • Same as # 50190
785105

FAAC XP30 Photocells 30m Range Relay

  • Hardwired pair of Photocell relays
  • 30m Range
  • IP54
  • 24v
  • Dimensions: 55 L x 78 H x21 D mm
TRACK-2"-RAW-10

Raw Vertical Track 2" 10'-0" Sold per Piece

  • 111" long 10'-0"
K1D8389-1CC

LiftMaster Main Board DC Pad Mount for UL325

  • This replacement board is compatible with the following models: CSW24U CSL24U RSW12U and RSL12U
  • Also compatible with HCTDCU and HCTDCUL Overhead Gate Operator
  • Same as 001D9039-1CC
K1A6426-2

LiftMaster Control Board for RSL12V / RSW12V ** USE K001A6426-2

K32-10540

LiftMaster Gear Reducer 20:1 SL595

  • Same as 32-10540 32-55011 32-5501-1 G3255011
34101

Doorlec V-belt Pulley 9" x 5/8" bore

  • Fits model ETB-3
38066R

Genie Series II Intellicode Wall Console GBWC2-BX ** Disc. replaced by 39165R

  • Series II Multi-Function Wall Console (White Color)
  • Vacation Lock button disables remote access
  • Light Control Button
  • This item has been discontinued and replaced by #39165R
PP12X34.5

Base Plate 12" x 34 1/2"

  • 12"x34.5" Base Plate Stainless Steel
EP2978

Exhaust Port 3" non latching long barrel

  • For use on insulated door panels up to 2" thick.
  • Inside diameter: 3" Includes fasteners & gaskets.
  • Outside diameter: 3-3/8"
  • Flange: 4-15/16"
  • Sleeve: 2"
  • Polished aluminum finish.
    • .......more details
MA007

LiftMaster Cogged Belt 4L290

  • Used on Mega Arm gate operators
8355W

LiftMaster Premium 1/2HP AC Belt Drive Wi-Fi

  • Free MyQ® Mobile App so users know their home is secure.
  • Built-In Wi-Fi® for the easiest way to connect the garage.
  • Real-Time Alerts indicate the status of the garage door via email or push notifications.
  • Monitors and Controls the opener from anywhere using mobile devices.
  • Belt Drive system for quiet maintenance-free performance.
  • Motor Vibration Isolation System (MVIS®) provides quiet reliable operation.
    • .......more details
Installation manualSell sheetBrochureReceiver Logic Board Conversion List
CP-MO-12R-115/1

Lynx Electric Motor Emerson 1/2 hp 120V Instant Reverse 6 Wire *** No Longer Available

  • Replaces the 4 wire AO Smith electric motor
BL-09

Barlock Kit Complete for 9ft Wide Door Kit includes hardware bag

  • Kit includes hardware bag and bars (55-1/2")
Assembly Manual
BL-10

Barlock Kit Complete for 10ft Wide Door Kit includes hardware bag

  • Kit includes hardware bag and bars (61-1/2")
Assembly Manual
21701

Doorlec Limit Switch Single ATM 15 AMP

60-2439

Allen Bradley Swivel / Tilt Mounting Bracket ***To Extent of Inventory

  • For 9000 series photo switches
783

Fasteners Hex Head Bolt Gr 5 3/8-16 x 1-3/4" 650/Box

  • 3/8" bolt has 9/16" head
  • Max torque = 22
  • Full thread
  • Grade 5
12575

Doorlec Clutch Disc Fiber 4" dia.x 5/8" bore

  • Fits model LJ / LJH
XT2564-00-W

Xcluder Rodent Block 4" Black 75' Reel

  • For commercial and residential applications
  • Creates a tough barrier that is virtually impenetrable to rodents
Sell Sheet
CT501L5

LiftMaster 1/2HP 115/230 Volt 1Ph Com. Trolley Operator with Carwash Mod

  • New Logic 5
  • Suspended from the ceiling the operators are used on sectional overhead doors with standard lift.
  • T operators are directly attached to drive and control the door.
  • MyQ® Technology enables you to securely monitor and control your facility operator and lights with your smartphone tablet or computer for greater peace of mind.
  • Alerts can be received as email or pop-up (push) notifications on a mobile device ensuring the status of your commercial door.
  • MyQ Mobile App is a free download with no annual activation fee.
    • .......more details
Installation manualManuel d'installationSell sheetBrochure
65_52091-14

LiftMaster Manual Hoist Mod. M8 #41 Chain for 14ft High Door

  • For 3/4 Hp & 1 Hp Trolley operators
  • Includes floor level brake release cable 1" x 12' round bar.
Installation Manual
K72-34818

LiftMaster Limit Shaft Kit SL575/585

  • Complete with: Limit Shaft Limit Nuts Limit Bearings Limit Sprocket Shim Washers Compression Ring Roll Pin and E-Ring.
K20-5150LD

LiftMaster Electric Motor 1/2HP 120V MT/MH Motor

NIR-50

Emx Industries Retro Reflective Photoeye Sensor with Reflector (5250-2)

  • Extended range for better performance in rain and snow
  • Compact design mounting hardware and indicators make it easy to install
  • Lower current draw of only 28mA makes it an excellent choice for solar and low voltage applications
  • Watertight package and optional protective hood offers protection for the NIR-50 from the elements and vandalism
  • Flexible voltage 12 – 240 Volts DC 24 – 240 Volts AC
  • Watertight package for reliable outdoor installation
    • .......more details
29202

Doorlec Transformer 550Vpr 120V sec. 35VA

DC2000SL

LiftMaster Power Backup *** Discontinued

  • Keeps traffic moving during a power outage
  • Opens the gate when power goes out to allow vehicles to enter or exit
  • When power is restored the gate will return to normal operation
  • Compatible with operators: SL3000UL
MALED12

LiftMaster LED Barrier Arm 12 ft

  • The NEW LED Barrier Arm provides exceptional visibility 24 hours a day.
  • Durable aluminum arm with integrated red LED lights on one side and Red/White DOT tape on both sides.
  • Ideal for use with the Mega Arm and Mega Arm Tower
79-16088

LiftMaster Circuit Board Assembly for LGO **discontinued**

  • Same as K79-16088
D525-54-HL

Cable Drum High Lift 54" D525-54HL Torque Force Pair

  • Maximum hi-lift: 54"
  • Capacity: 500 lbs per drum
  • Max. cable size: 3/16"
  • Cable length: Floor to shaft center 66" minus amount of Hi-Lift
  • Cross reference: DNS 54 OMI 54HL M134-1375
BG790-50-11

LiftMaster Industrial-Duty Wishbone Barrier Gate Operator 1/2 HP 115V Arm & Weight Included ***Must include Arm G651208R***

  • A reliable gear-driven barrier gate operator that is perfect for industrial applications.
  • This barrier gate is designed for Wishbone-Type Arms with lengths of up to 24 ft.
  • The BG 790's powdercoated weather-resistant steel enclosure and its 1/2 HP commercial motor ensure strong dependable performance.
  • Standard Features: Control inputs and Adjustable limit settings
  • Includes a 24' arm
Installation ManualSell Sheet
K20-1075B-2P

LiftMaster Electric Motor 3/4 HP 115/230V 1Ph Contactor Model

HDC-411-RH-CONT

Lynx Ind. Jackshaft with Hoist 3/4Hp 115V Contactor Right Hand

  • 1/2 3/4 1HP 115-230-460 or 575V single or three phase motor capacitor start overload and under voltage protection.
  • Solid state circuit board Lynx-6000. Built in 1.5 second delay.
  • 5L V-belt primary reduction #50 drive chain and sprockets.
  • Adjustable friction clutch magnetic solenoid brake.
  • Precision pillow block bearings on output shaft.
  • Fully driven adjustable limit switches.
    • .......more details
Sell Sheet
26-40045

Truck Door Offset Bottom Seal 98" Long for Whiting Dryfreight Doors

  • Co-extruded using rigid PVC backing with flexible PVC seal.
  • To be used with the offset U-channel retainer only (26-40037 or 26-40039)
GH4416-02-L

Green Hinge #2 12-ga Left Hand *** No longer available

  • A unique spring-loaded hinge that allows automatic adjustment of the door.
  • Provides a close tight seal of the door to the building
  • Green powder coat finish
  • For doors up to 20ft
12-19504

LiftMaster Flanged Bearing 1" Keyed

Z9965

Bearing Blaster

  • Fast and easy way to remove and re-seat bearings into bearing plates
  • Works for both 1" and 1-1/4" bearings
  • Instructions included
Instructions
41D7924-1

LiftMaster Extra Door Sensor for 821LM First Generation **to extent of inventory

  • Liftmaster Chamberlain 041D7924-1
  • Required to add a second garage door opener to your 821LM MyQ Garage.
  • Works on the Liftmaster 821LM and Chamberlain MYQ-G0201
  • Compatible with:
  • Green Learn Button (Billion Code 390MHZ)
  • Models: 1245 12551270 1280
    • .......more details
AC9

Felco C9 Cable Cutter 1/4" Capacity

  • Tool length: 13"
  • Gives a clean cut without crushing thanks to the triangular cutting system.
  • Blades and centre bolt in high-quality hardened steel for exceptional performance.
  • Thumb catch designed for one-handed operation.
  • Pressed steel handles with non-slip grips
  • Maximum cutting diameter: 9mm / 0.35in
    • .......more details
Data sheet
2528.110

Whiting Dual-Spring Shaft 110" for Whiting Roll-Up Doors

  • Constructed of 1" outside diameter heavy-duty steel tubing
  • No pre-drilled holes
  • Cross Reference: For Whiting # 2376 balancer
7549

Whiting Winding Cone for 2-5/8" ID Spring Wire Curbside (RH)

  • A Whiting original
SEL2641R433-IP5

Erone 2-Relay Stand Alone Receiver Up to 500 Users 433MHz

  • 2 transmitter keys per user
  • 1 NO relay + 1 NO/NC relay (24VA)
  • Self-learning memorization
  • 12/24V AC/DC
Wireless System Chart
37845R

Genie Screw Drive Carriage Assembly

  • Compatible with the following models: GPower 900 TriloG 1200 TriloG 1500 PowerMax 1200 PowerMax 1500
  • Works with Screw Drive Shuttle assembly part # 36664R - sold seperately
AK-21

Linear Interior Digital Keypad ***to extent of inventory

  • The keypad is housed in a rugged plastic enclosure and is designed to be mounted in a standard single-gang electrical box. The die-cast keys have bright easy-to-read yellow graphics.
  • It is supplied with four different plastic snap-on mounting bezels to customize the look of the keypad. The satin-chrome bezel comes factory installed on the keypad. The white ivory & bronze bezels are packaged separately.
  • Up to 480 entry codes from 1 to 6 digits in length can be programmed. They can activate either or both of the relay outputs.
  • Relay #1 has a 5 Amp capacity. Relay #2 has a 1 Amp capacity. The relays can be set for timed or latch-on/latch-off toggle operation per each individual entry code.
  • The on or off toggle state of a relay is maintained even after power interruption. When power is restored to the keypad each relay will assume the state it was in when power was removed.
Installation Manual
MOD021A

Manaras Safepack 24V Control Circuit

  • A safepack module is used as an "Intrinsically Safe Barrier Relay" and in hazardous locations with non-voltage producing sensors allowing the user to use a N.O. non-monitored sensing edge.
LA500HDTKITSTD

LiftMaster Torroid Transformer Kit

  • Powers gate from AC power-120V or 220V single phase.
  • Ideal for applications that prefer AC transformer run operator vs. battery run operator
  • Ideal for areas that experience temperatures below -4 F for extended periods
GH105-L5

LiftMaster Gearhead with Brake 1 HP 575V 3-Phase Logic 5 (GH105L5-MC)

  • GH-style operators include a floor level chain hoist to ease manual operation in an emergency or power outage.
  • The operators are typically mounted to the wall when used with sectional overhead doors with vertical or high lift and mounted to the wall or the front of the hood when used with rolling doors and grilles.
  • GH operators are attached to the door jackshaft to indirectly drive the door.
  • MyQ® Technology enables you to securely monitor and control your facility operator and lights with your smartphone tablet or computer for greater peace of mind.
  • Alerts can be received as email or pop-up (push) notifications on a mobile device ensuring the status of your commercial door.
  • MyQ Mobile App is a free download with no annual activation fee.
    • .......more details
Installation ManualManuel d'InstallationSell sheetBrochure
CP-EB-MCJ-34115

Lynx E-Box for MCJH 3/4HP 115V 1Ph

  • Complete electrical box
VMD202-100

EMX Vehicle Motion Detector Probe with 100ft Lead Wire

  • The VMD202 Vehicle Motion Detector is the most advanced single-piece vehicle motion sensor on the market today.
  • The probe and its electronics are housed in a slim design that is buried next to a driveway.
  • The VMD202-R Sensitivity Remote Control (sold separately) makes installation and fine tuning simple
  • Probe assembly and wire are water tight and direct burial compatible
  • Harness is pre-wired onto lead wire for easy installation
  • Settings are placed in a non-volatile memory in case of power failure
    • .......more details
Installation ManualSell Sheet
MK-00647

Micanan 1 Channel Transmitter 372 MHz

  • Works with Logic 10.0 and medium duty on-board receivers
  • Also works with MK-00648 external receiver
  • Two CR2032 batteries and visor clip included
  • Not Homelink compatible
Programming Instructions
7001-10-BLACK

Commercial Side & Top Weather-Strip 10' Long - Black (B)

  • Black galvanized steel with black dual fin vinyl.
  • Commercial and Residential use.
  • Steel is notched on both ends for easier installation.
165-A

Fusible Link For Loads 1 to 30 lbs

  • Length is 2.625" width is .875"
  • Distance between centers is 1.75"
  • Priced per each
  • Fire rated at 165 degrees Fahrenheit
MOFR-M14-8

Carlo Gavazzi Photoelectric Sensor Thru-Beam Receiver

  • Maximum sensing range is 20 meters
  • 11-Pin
  • 8 inch optical beam angle.
  • Waterproof for harsh environments i.e. water dust steam etc.
  • To be used with amplifier series S142
  • Supplied with 15 m of shielded cable.
    • .......more details
Installation Manual
19-48047M

LiftMaster Roller Chain #48x47

  • #48 x 47 pitch with master link
  • Internal reduction chain
  • Length is 24"
K72-19974

LiftMaster Output Shaft Kit

  • Kit includes: Output shaft sprocket assembly dual sprocket 32/14 sprocket 48B18x1 sprocket 50B12x1 ring washer key set screw roll pin and thin walled receivers
Installation Manual
RELAY021

Manaras Socket Base for Loop Detectors ZPD11

  • 11-Pin base
M3-2312

Marantec 2-Button Transmitter 315 MHz 97243/122436

  • Same as part # 65892 97243 122436
  • Includes battery CR2032
  • Made in Germany
Instructions
22405-KEYLOCK

Doorlec Weatherproof Pushbutton O/C/S Key Lock with On/Off Switch

91-G0149

LiftMaster Idler Bolt w/Zinc Fitting

  • Fits SL595
BOARD075E

Manaras Replacement Board Kit (No Monitoring)

  • Replacement kit that includes BOARD070E (control board) & BOARD066R (power board)
  • BOARD070E is for standard operators without the monitoring function
  • For all Manaras operators built after October 2010
  • On-board 390MHz radio receiver accepts 50 remote controls
  • For older models built before October 2010 use BOARD060 or replacement kit BOARD065
Replacement ChartGuide de remplacement
LOOPDETLM

LiftMaster plug-in loop detector

  • Plug-in Loop detector for CSW24V CSL24V AND LA500
  • Includes diagnostic and test feature
  • 12VDC/3mA power draw
  • For exit interrupt or shadow loop applications
  • Activates only when a vehicle passes over a loop
  • 8 sensitivity levels plus boost to ensure that vehicles are easily identified
    • .......more details
Installation Manual
K74-31243

LiftMaster Kit SVC MOV

SOLID_SHAFT_9FT

Solid Shaft 1" Keyed 9 ft Galvanized

  • Actual length is approx. 9'-1"
BK010

Commercial Top Bracket Adjustable 1-Bolt Sold per Piece

  • Galvanized steel
  • 12 gauge roller carrier and base plate
  • Adjustment of 7/16" minimum to 2-3/16" maximum
  • Good for use with 3" hardware
T-833-C-OCS

Allstar 3-btn 3-Door O/C/S Transmitter 109025-311 MHz****NLA

  • Open/Close/Stop remote for 3 doors
  • Compatible with 3-channel Allstar and MVP receivers
  • Portable transmitter
  • Easy access to battery and coding switch
  • Slide switch selects door to operate
  • Power: 9-volt battery
    • .......more details
Programming Instructions
41A7114-7

LiftMaster Travel Module (41D8071-4)

  • For model: 8550W & 8160
  • Same as 41D8071-4
Installation ManualManuel d'Installation
CABLE_532SS-500

Cable 5/32" 7x19 Stainless Steel 500ft

Comparison charts
MX00147-NEW

Micanan Complete Clutch Kit for PRO-TB New Style Frame (MX00211)

  • After January 2006
  • 8" Diameter pulley
  • Feb 2017 - new part number MX00211
111010.0001

Overhead Door Serpentine VBelt 27" (6EPJ683)

  • Serpentine belt 27" long
  • Fits Genie GCL-T Trolley operator
  • Some Overhead drawbar models: JST RSX RMX
LSBLK

Loop Sealant Cartridge Black 29oz

  • Also available in grey (LSGRY)
  • Can be installed in sub-zero temperatures as long as the surface is clean and dry
  • Loop sealant gun sold separatley # LSGUN
41A4252-6G

LiftMaster Circuit Board Assembly ** Discontinued

  • Assembly includes: circuit board end panel and light socket
  • Also includes: 1 Multi-Function wall control panel - 2 wire
  • For chain drive units with two lights
  • Fits 1250 1260 1270 1280 220WD 320WD 5100 7200 & 8100
41B0139

LiftMaster MVIS Motor Isolators 4/box

4A1344

LiftMaster Light Socket Plastic (41C279)

144C54

LiftMaster Idler Belt Pulley

  • Wide idler belt drive pulley
  • For square rail assemblies
41AB050-2

LiftMaster Electronic Circuit Board Assembly

  • Assembly includes: Logic board end panel and light sockets
  • For belt drive models with 2-lights
  • Also known as 41AB050-2M
MI00006

Micanan VBelt 5L 32.5" 5L325

MK-00653

Micanan 3-btn O/C/S Transmitter 372 MHz

  • Hand held transmitter for on-board receiver with smart 10.0 board only
Programming Instructions
PL-A03-OLD-BRD

Lynx Replacement Logic Board Old Version *** No Longer Available

  • Old version board works on operators with a blue cover
  • Replacement logic board for Napoleon/Lynx Proline garage door opener
  • For openers built before 2008
  • This board has a transformer (the new board does not)
PL-A03-NEW-BRD

Lynx Replacement Logic Board New Version

  • New version board works on operators with a red cover
  • Replacement logic board for Napoleon/Lynx Proline garage door opener
  • For openers built June 2008 or later (date code 0806 or newer)
  • This board does not have a transformer.
H14G01

Hinge #1 x 14 gauge

  • Bright zinc plated 14-gauge steel hinge
  • For use with 7/16" diameter stem rollers
  • Full body hinge 2-3/4" wide
  • #1 position
  • Use between sections 1 and 2 or in the center position
  • Same as part number 241
    • .......more details