Devanco Canada - Get The Right Garage Door Opener‎ and Parts

CABLE_3/8SS-500

Cable 3/8" 7x19 500' Stainless Steel

CP-SH-34-16-1212

Lynx Complete Clutch Shaft Assembly for CDJH

3/4" -16 x 12.50"

CB14-KOR-PER-FT

Cable 1/4" 7x19 Galvanized Supreme Sold per Foot

Galvanized Cable 1/4" 7x19.
Cable break strength: 2000 lbs
A higher quality cable compared to the Chinese cable.
Meets endurance test requirements of over 35000 work cycles
Lubricated for flexability and longer service life
Sold per foot anything over 2" is rounded up to the next foot.

.......more details

MQ00011

Micanan 3/32" Aluminum Oval Sleeve Sold per Unit

DC750-100

Dyna-Hoist DC Series Direct Drive Opener 3/4 HP 110/240V 1ph ** Price by Quote Only

Direct drive operator with a DC electric motor directly coupled to a hollow shaft (30:1 reduction) worm gear reducer designed to install over keyed door shaft.
Continuous duty 0.75 HP 90 V DC 1750 rpm motor 110 to 240 V 1 PH and 60 Hz power supply.
Integral absolute encoder to control the door travel
24 V 7 amps back-up battery pack and 3/8” ratchet socket to accept and crank for manually operating the door in case of power failure
Programmable wall mountable UL325 compliant NEMA 4X control panel with LCD display and OPEN-CLOSE-STOP buttons on cover
Pulse with modulation programming to provide soft-start soft-stop dynamic brake and speed control

.......more details

Pulse Series Installation Manuals DC Series Brochure

LAP

Linear External Antenna Kit LA-P AAE00366

Compatible with DVS-1200 DVS-2400 and DUAL-824 systems
Omni-directional external antenna
Antenna connector mounts inside case wire whip extends outside case
Compatible with EXA-1000 external antenna
Designed to enhance the radio range of Linear's DVS-1200 DVS-2400 and DUAL-824 systems.
The LA-P antenna Type F connector can also be used for coax connection with a remote mounted EXA-1000 antenna.

.......more details

422CBAC0

FAAC 422-115V Operator Only ** Price by Quote Only

OPH-6113-M-N1-LH

Manaras Opera-H 3/4HP 120V 1Ph Monitored Board w/N1 Eyes LH

A heavy-duty industrial jackshaft operator
For use on Standard High and Vertical Lift sectional doors
Can also be used on Rolling doors and Grilles
Comes with a self-engaging chain hoist for manual operation
Clearence: side room required 15"

OSH-6113-M-N1-RH

Manaras Opera-SH 3/4HP 120V 1Ph Monitored Board w/N1 Eyes RH

An ultra high-end heavy-duty V-belt drive industrial jackshaft operator
For use on Standard High and Vertical Lift sectional doors
Can also be used on Rolling doors and Grilles
Comes with a chain hoist for manual operation and a floor level engaging device
Clearence: side room required 16"
25 cycles per day > 100 cycles per day

.......more details

Installation Manual Sell Sheet

K07-8064

LiftMaster Lower Crank BG790

Also known as: G078064 07-8064

BTM-VB-3.25

Devanco Bottom Vinyl U-Rubber 3.25" Black 250' spool

250ft spool of vinyl insert for sectional doors
low temp vinyl
perforations in the bottom to ensure that condensation escapes
Fits most standard bottom retainers

GHX-383-1HP-LH

Doorlec Explosion Proof Gear Head 1 HP 208V 3PH ECB Left Hand

Nema 7/9 control box
Electrical connections from motor to control box consists of hazardous location certified fittings and NEMA 7/9 O/C/S push-button station

P-9931T

Pulsar 1-btn Transmitter 318 MHz

Allstar compatible
Single channel transmitter
8 dipswitches 318 MHz

Programming instructions

4580-304-KYNAR/GY

Adseal DWS Weatherseal Silicone Adhesive Sealant 304ML Kynar Grey 458-97 *** To Extent of Inventory

304ml cartridge
Ideal for movement and perimeters joints
Meets ASTM C920 S NS Class 50 NT M GA O
Meets AAMA 802 and 805 standards
Can be used on aluminum glass masonry some plastics painted and unpainted metals & does not yellow
Excellent resistance to UVs for indoor and outdoor use

.......more details

R1P

Erone Radium + Paradox 1-Channel Key Chain Transmitter 433MHz

Designed for the control of automatic closing systems and anti-burglar systems thanks to its very high security coding system (KeeLoq® Hopping code).
The code sent by the transmitter changes at each activation avoiding any scanning and copying risk.
A special algorithm allows to keep synchronized transmitter and receiver.
Range up to 250 m (820 ft)
Ergonomic rugged & durable
Battery: Two 3V lithium battery (CR2016)

.......more details

Wireless System Chart

CRG11136P

Pentagon Crank Gear 11:1 36kg PVC *** Price by Quote Only

041-0365-000

LiftMaster Sensor Eyes and Brackets 1997-Current

For use with various LiftMaster® and Chamberlain® Belt Drive and Chain Drive Garage Door Openers; manufactured after 1997.
Complete kit includes: (1) Sending sensor eye (with LED) (1) receiving sensor eye (with LED) (2) replacement brackets and replacement hardware.
Also known as or Replaces: 041A5266-1 041A5266-3 41A5266-3 41A5266-1 12D584-1

OSH-6534-ECB-LH

Manaras Opera-SH 1 HP 600V 3 Ph with Electronic Circuit Board Left Hand

An ultra high-end heavy-duty V-belt drive industrial jackshaft operator
For use on Standard High and Vertical Lift sectional doors
Can also be used on Rolling doors and Grilles
Comes with a chain hoist for manual operation and a floor level engaging device
Clearence: side room required 16"
25 cycles per day > 100 cycles per day

.......more details

312964

ODCC Adjusting Wheel 8" OD 1" Bore

K001D8116-1

LiftMaster Power Board 3ph 230/460/575V L5 N4/4X

Complete kit includes: 3PH power board and standoffs required for installation

RN0037-SS

Roller 3" Black Nylon 7" Stainless Steel Stem Precision Sealed Bearing 6203

A supreme precision sealed bearing roller that never requires lubrication
Ideal for high usage and high moisture areas ie..carwash
7/16" stainless steel shaft.
100 lb load 100000 cycles of a 12' door
Stem Length - 6.69" which does not include the shoulder Overall Length - 7.97"

202-0022

TNR Composite Bottom Bar Arm for HDXL *** Price by Quote Only

5416-2

EMX RAVEN Programming Remote

Makes it easy to set up and make adjustments to all key parameters of the RAVEN motion detector while at ground level
Remote sold separately

Quick Start Guide

K-SL5851011G3

LiftMaster Electrical Box Replacement Kit SL585 115V 1HP 1PH *** Price by Quote Only

Compatible with LiftMaster® SL585 Series 1-Phase 1HP Slide Gate Operators.

K76-34728

LiftMaster EMI Board with Power Switch

Compatible with various LiftMaster® Perimeter Access Systems

10RD433

BEA Digital Receiver 433 MHz

Receiver with integral sequencing "learn" buttons (for vestibule sequencing) pulse/toggle functionality and additional hold time.
Operating temperature: -10 to 55C
12-24V AC/DC
Max No. of Programmed Units Per Receiver: 100 Transmitters

CAPXM

LiftMaster Smart Video Intercom

LiftMaster’s cloud-based video intercom for multi-tenant residential properties.
The intercom allows residents to see their visitors through live video and grants access to the building via the MyQ app
Display and interface – 7” color display with touchscreen
Connectivity – WiFi cellular wired high-speed DSL
Audio capabilities – Voice over IP – digital call quality with no long-distance charges
Video capabilities – One-way video calling with a 135-degree view

.......more details

K71-416-7NH

LiftMaster Loop Detector Board 24V ***No Longer Available

Also known as: 714167NH G714167NH 71-416-7NH
For use with various LiftMaster® Commercial Swing and Slide Gate Operators

7-6137

Richard-Wilcox 1x#31 Lock Joint Clip

Used with #461-0004 track

LRS-C1

EMX Vehicle Detector Control Unit for Single Sensor 2303-2

The Loop Replacement System (LRS) features advanced 3-axis magnetoresistive sensing technology that responds to changes in the Earth’s magnetic field caused by ferrous objects.
Three sensing elements provide measurements in the X Y and Z axes to improve detection sensitivity when used in either above or below ground installations.
The LRS is equipped with our new DETECT-ON-STOP™ or (DOS®) feature which allows detection only when a vehicle has come to a complete stop.
Backwards compatible with CS303 sensors

751-CDN

Fasteners Self Drill & Tap Tek Screw 1/4-20 x 1" (#2PT) Canadian Steel - 1000/Bag

7/16" Head
Indented hex washer head
Max RPM = 2000
Made in Canada with Canadian Steel

167212

Decorative Dummy Solid L-Handle Black Sold per piece

Zinc painted black powder coated with crinkle finish
No rotation
Blind mount

EHJ-321-3/4

Doorlec Industrial Jackshaft Op. 3/4 HP 230V-1Ph

Heavy-Duty Industrial Operator for Sectional or Rolling Steel Doors
DC-2000 logic with adjustable Timer To Close Delay On Reverse and Traffic Light Control
Solenoid Brake prevents coasting and secures the door when closed
TEFC (sealed) continuous-duty electric motor with overload protection
Automatic Friction Clutch protects the door and operator
Self-aligning Heavy Duty sealed Pillow Block bearings on all shafts for high cycle applications

.......more details

EHJ-321-1/2

Doorlec Industrial Jackshaft Op. 1/2 HP 230V-1Ph

Heavy-Duty Industrial Operator for Sectional or Rolling Steel Doors
DC-2000 logic with adjustable Timer To Close Delay On Reverse and Traffic Light Control
Solenoid Brake prevents coasting and secures the door when closed
TEFC (sealed) continuous-duty electric motor with overload protection
Automatic Friction Clutch protects the door and operator
Self-aligning Heavy Duty sealed Pillow Block bearings on all shafts for high cycle applications

.......more details

MOTOR383

Manaras Electric Motor 2 HP 208/480V 3Ph

Continuous duty C-flange ODP 60Hz

O19R3000

AirLift Timer Macromatic with Socket

RADIO-EM104

Manaras 4-btn 4-door Rolling Code transmitter SBC or O/C Function 390 MHz

2 operating sequences available: open/close or single button control (SBC).
Single button control (SBC) allows the user the possibility to open stop or close the door by using the one button.
Comes with LED indicator CR2032 battery and visor clip.
Compatible with Manaras operators manufactured after August 2013 with control board070E & board070M.

Manual

RR-3-11-6202

Roller 3" UHMW + Rubber 11" Stem Black

3" UHMW tire covered with rubber
6202 sealed precision bearing
11" zinc plated stem
Rating: 200lb load; 100000 cycles of a 12' door
Helps quiet the operation of the sectional door

LJH-311-3/4

Doorlec 3/4HP 115V 1PH Jackshaft Operator

Nema 4/12 now included (11/2025)

Technical information

MOD007

Manaras Reverse Limits

Necessary feature when the opening and closing of the door corresponds to a different rotational direction than the operator

3228

Whiting 2" Nylon Roller 3" Shaft

Zinc plated shaft 10 roller ball design
Shaft Length: 3" Overall Length: 3.75"

19-5810-NP

LiftMaster Trolley Chain Pack #48 for 10ft Door Nickel Plated

Chain pack only

VBELTBX32

Manaras VBelt BX Cogged For RTBH RTBHW/C

Fits models RTBH RTBHW/C

BEA-10-LBA

BEA LZR Metal Bracket Accessory

Mounting bracket only for the LZR industrial sensors including: LZR-I30 LZR-S600 LZR-H100 LZR-U920/U921

Installation Guide

TRACK-SET-2-138-7

2" Tracks Set 7'-0" Torsion 1-3/8" Door Clips for Wood Frame 12" Radius *** By quote only

111087.0001.S

Overhead Transformer 120/208/240V - 1 Phase

works on various Genie ops ie GCL-GH

P40-10PFO

Hand Crank Reducer 107174

5009-5P6-PAINT

Aluminum Touch Up Paint Nail Polish Style Iron Ore / Minerai de Fer #5P6

Glass bottle and brush applicator

12-12004

LiftMaster 1" Ball Bearing

For use with various LiftMaster® Heavy Industrial-Duty Commercial Door Operators
Drive shaft bearing used on RBH
Same as K12-12004

ALUM-554

Aluminum 24" x 100' Spool Chestnut Brown / Brun Marron # 554

20% thicker than the aluminum sold in retail stores (0.022" )
Gentek # 554
Reverse side is #431 Bright White

Colour chart

K75-30737

LiftMaster Disconnect Kit for GH

Disconnect Kit Complete with: Disconnect Lever Bevel Gear Yoke Brake Release Actuator Bracket Switch Actuator Disconnect Shaft Tension Spring Sash Chain with Keyring Screws Nuts Flat Washers Lock Washers Cotter Pins and Roll Pin.
Compatible with LiftMaster® Model GH Commercial Door Operators.

K10-3515

LiftMaster Retainer Guide

Also known as: 10-3515 G103515 103515
For use with LiftMaster® Models SL580 & SL590 Commercial Slide Gate Operators and Perimeter Access Solutions

K77-10897

LiftMaster Mounting Bracket Disconnect (Chainkeeper) H MH GH SD

Also known as: 10-10893 107011 10-40463 1010893 109027 K77-10704

OWL-RC

EMX Infrared Programming Remote for OWL

OWL-RC is required for programming the OWL Motion Sensor

Quick Start Guide

OWL

EMX Microwave Motion & Infrared Presence Sensor

The OWL is a vehicle motion and presence sensor that uses microwave and infrared technology to activate automatic doors and industrial gates.
Featuring two configurable outputs vehicle motion detection as well as presence detection the OWL activation sensor will ensure the safety of people and goods.
Mounting Height: 11.5-21.3 ft (3.5-6.5 m)
Supply Voltage: 12-24 VDC/AC
Dimensions: 9” (229 mm) x 5” (127 mm) x 5” (127 mm)
Connections: 32 ft (10 m) 8 conductor cable directly from sensor

.......more details

Manual Sell Sheet Quickstart Guide

AHB-716

Adjustable Hinge Bracket for 7/16" Roller Shaft

Mounts on the #1 hinge to make the hinge adjustable from #2 through #13
Eliminates the need to stock odd size hinges
Works for 7/16" shaft diameter rollers

821LMB-2SENSOR

LiftMaster MyQ Smart Garage Door Add-On Sensor Backwards Compatible

This add-on door sensor works with the myQ Smart Garage Hub to monitor and control a second garage door opener.
This version of the myQ door sensor is only compatible with the new myQ Smart Garage Hub by LiftMaster Model 821LMB
Replaces both 821LM-SENSOR and 821LMB-SENSOR and can be used as a replacement for either one
Also known as: 821LM-SENSOR 041D7924-1

4580-304-WHITE

Adseal DWS Weatherseal Silicone Adhesive Sealant 304ML White *** To Extent of Inventory

304ml cartridge
Ideal for movement and perimeters joints
Meets ASTM C920 S NS Class 50 NT M GA O
Meets AAMA 802 and 805 standards
Can be used on aluminum glass masonry some plastics painted and unpainted metals & does not yellow
Excellent resistance to UVs for indoor and outdoor use

.......more details

1940-COMM-BRN

Adseal Weatherseal Hybrid Adhesive Sealant Commercial Brown

Excellent adhesion to several types of sidings
Paintable sealant
Solvent free isocyanate free and phthalate free
Meets ASTM C920 S NS Class 50 NT M G A O
Very good elongation and easy application in cold weather
Low VOC

.......more details

236515

Wayne Dalton Res. Bottom Bracket Roller Holder LH

Compatible with Wayne Dalton 9100 9400 9600 9800 Foamcore II garage door models.
Pins & Cotters Included
Top quality galvanized steel
Dimensions: 4" Wide x 1.25" High x 1" side flange with milford pin
Sold as a single unit

K79-13493B-600

LiftMaster Logic Board Replacement Kit FDO5011BUR UL325 with batteryback-up board

Replacement board for fire door model FDO5011BUR

426-0913

Richards-Wilcox Galvanized End Cap T175-24" LH

210135

Skylink Chain for 7ft Door

Replacement chain for chain rail

CDJH-34-115-ECB

Lynx CDJH Heavy-Duty Jackshaft 3/4 HP 115V with ECB Right Hand UL325

3 Button station (NEMA 1)
1650 RPM high starting torque motor with overload protection
Inherent Mechanical Brake (I.M.B)
B2 Mode C2 Mode D1 Mode E2 Mode T Mode TS Mode
On board Open Close & Stop for ease of setting limits
Pre-wired to accept sensing devices

.......more details

RADIO-EM102

Manaras Mini 3-btn Rolling Code transmitter 390 MHz

Field Configurable
Hand Held or Keychain three button
Rolling Code Technology
1 Door (SD) Open/Close/Stop or Multiple Doors (MD) 1-3 single-button field selectable
Config. Trad. Comm. Sesquence or Alternating Sequence (SBC) Open/Close/Stop (with ECB)
Nema 1

.......more details

Manual

19-40ML-NP

Master Link #40 Nickel Plated

For #40 chain

19-60ML-NP

Master Link #60 Nickel Plated

For #60 chain

LPWKP-BLACK

Linear MegaCode Wireless Keypad 318 MHz Black ** To Extent of Inventory

Activates multiple MegaCode receivers
User selects 1 to 6 digit PIN number or 1 to 6 letter PIN name
Programming is easy via the keypad; MegaCode receiver auto-learns PIN
Backlit keys for easy viewing
Wall mounting hardware (2 screws and anchors) supplied
Power: Three AAA batteries

.......more details

MA020T

LiftMaster Mega Arm Tower Replacement Cover

Mega Arm Tower Cover.
Compatible with LiftMaster® Barrier Gate Perimeter Access Systems Operators.

MA005

LiftMaster Gear Reducer 60:1

Replacement Gear Box (60:1).
Compatible with LiftMaster MADCBB MATDCBB MASTDCBB

25-42-320

Extension Spring 7' Door - 320 lbs Green w/ clip

Double - Loop
25" long 42" stretch 320 lb load
Sold individually
Rated for 10000 cycles

WA11

NICE Adjustable Stand for L & M BAR Gate Op

Adjustable stand for the barrier arms of the M-Bar & L-Bar barrier gate operators
Attaches to ground and provides support when arm is down

DS50

Light Commercial Non-Insulated Rollup Sheet Counter Door

Max Width: 12’
Max Height: 6’
26-gauge galvanized steel
Manual lift operation
Slide bolt or curtain lock

3250

Deadbolt Diecast Case Lock Set w/2 Keys

Includes mounting hardware
Includes 2 regular keys (not Master keyed) Schlage keyway
For use on doors up to 2" thick

E402-00-FM

Doorlec Ersce Utility Switch 6A/230V Roller Arm ** Indef. Delivery

Utility switch with a 'NO' and a 'NC' contact
Adjustable arm with roller
Made in Italy

MM00082

Micanan Solenoid Support Bracket (MSI0085)

VFOH5011

LiftMaster Variable Speed Front of Hood Op. 1/2 HP 120V with CPS-U

Front of Hood Mount for Rolling Steel Doors and Grilles.
Variable speed up to 12”/sec with smooth start/stop feature.
Floor level controls with intuitive menu driven interface.
Accepts: (30) 3-Button Remote Controls or (90) 1-Button Remote Controls
Accepts an additional 30 Wireless keypads and Unlimited Dip Switch remotes
Includes: 1 x Powerhead (with 16.5 ft. Integrated Hoist Chain) 1 x Controller 1 x Powerhead Mounting Bracket with Hardware 1 x VFD Cable (22 ft. Standard) 1 x Encoder Cable (22 ft. Standard) 1 x #50 Drive Chain 1 x 40-Tooth Sprocket 1 x LiftMaster Monitored Entrapment Protection (CPS-U Standard

.......more details

Q104

LiftMaster Standard Arm Assembly CSW24U/RSW12U (75-50293)

Also known as: Q038 75-50293 K09-50104 Q040

GAREX-W/STRIP

Garex Weatherstrip Special Order

specify size color details when ordering
Please call for pricing

24856

Stanley Front Idler Kit for Chain/Cable Openers *** NLA

For Stanley Chain/Cable Openers Only
Not for Stanley Full Chain Openers
Replaces Part #920-0147

BK438/PR-USA

End Bearing Plate Flanged 11-GA 4-3/8" with Bearing. Commercial Sold as a pair

For commercial applications Used on wood jambs
Includes (1) RH and (1) LH plate with bearing
EBF438- USA Style

Q027

LiftMaster Motor Capacitor 240VAC 65 MFD K29C-65AU2415

Replacement Motor Capacitor (65uF 240VAC 50/60Hz).
Compatible with LiftMaster® CSW200U & SL3000U Models (post 2016) and various Commercial Swing and Slide Gate Operators; manufactured before 2016
Dimensions: 2" diameter x 4-1/4" long.

77

Whiting Steel Outside Cam Lock Black Standard

SGP-311-1-115/1

Doorlec Gate Master 1 HP 115V 1 Phase with Heater

Post mount heavy-duty industrial slide gate operator
Max. gate weight: 2500 lbs
Gate travelling speed: 45 ft / minute
175 watt heater with thermostat included
Includes Omron reflective photocell

MOTOR350-WIRED

Manaras Electric Motor 1 HP 120/240V 1Ph Wired

Continuous duty C-flange ODP 60Hz

K41-39254

LiftMaster Reflector and Bracket Kit

Commonly used to replace a lost or damaged reflector for LiftMaster® Monitored Photoelectric Sensors (LMRRUL).
Complete kit includes: (1) Bracket (1) Reflector (1) Reflector Cover and Assembly Hardware
Compatible with LiftMaster® LMRRUL Monitored Retro-Reflective Photoelectric Sensors
Reflector Dimensions with Hood: 2.6" x 4.72" x 2.0" (W x H x D)
Reflector MUST be mounted vertically; no horizontal mounting

URBAN-MR-R12

Garex Ready to Install Door Special Order

R12 Insulation - Narrow multi rib pattern - Available in steel white and black - A variety of decorative windows can be added - Custom colours can be factory painted - Multiple hardware configurations are available to accomodate site requirements

C-24X12-134-LEXBLK

Thermal Window 24" x 12" for 1-3/4" Door Lexan Black *** Special Order by Quote Only

For 1-3/4" thick door
Glass type: Polycarbonate (Lexan)

N4GH503L5-RH

LiftMaster Gearhead wi/Watertight/Oiltight Mod. and Brake 1/2 HP 230/460V 3-Phase Logic 5

N4 (M103) modification installed on operator Watertight Oiltight Dust-tight with Nickel-plated chain and Dynamic brake.
Comes with CPS-UN4 photo eyes

210337

Skylink Turnbuckle Kit

Fits Skylink & select Mastercraft openers

K75-13074

LiftMaster Straight and Curved Door Arm Kit APT

Compatible with LiftMaster® Model APT trolley Operator

C-24X12-134-BLK

Thermal Window 24" x 12" for 1-3/4" Door Black

For 1-3/4" thick door

422LMC

LiftMaster 2-Channel Co-Axial Receiver 390 MHz ***DISCONTINUED

Smart Garage Door Opener® electronics on each channel for fast programming
Bell wire attached for easy second channel hook-up
18 - 35VAC/DC
FCC certified 390MHz

MA034RDOT

LiftMaster Articulating Square PVC Arm Kit Red/White with Retro-Reflective DOT Tape 9 ft

For use on Mega-Arm gate operator
Red White reflective DOT stripe
9 ft. x 2.5 in. square includes hardware kit (MA033)

Additional arm accessories

105381

Amarr T-Handle Lock Kit for 1 3/8" Thick Doors Black *** Price by quote only

includes exterior & interior locking device with keys
this item is requires for use with lock bar or cable snap latch components
Need to order 109290 which is the hardware needed for installation or the lock won't work.

D-67

Linear 1-Channel Digital Receiver 303 MHz

Designed for use in security systems and remote switching functions.
Typical applications for the receiver include adding a wireless zone a panic button or creating a remote arm/disarm feature for a hardwired alarm panel
Operates on 11-24 VDC or 12-16 VAC power
One channel
Standard digital format: 256 discrete codes
One form “C” relay output

.......more details