Devanco Canada - Get The Right Garage Door Opener‎ and Parts

218189-01

Linear Trolley Assembly

1003-6.5"-100FT

Bottom U-Rubber 6.5" Black 100' Long

100ft spool of vinyl insert.

27-20301

Truck Door Cable Drum Curbside (RH) for Todco Roll-Up Doors

Cast aluminum construction
Large die cast cable drums are grooved to prevent cables from binding or wearing prematurely.
Angle of cable slot determines left or right drum.
Holds up to 130" door cable
Cross Reference: T #59033-1 T #59129-1 W #4013 330100

HD8460-200

T-Handle Cable Lock System 2"

Complete cable locking system for a 2" door.
System includes: Auto Latch Striker Keeper T-Handle keyed with 4-1/4" shaft Inside release handle 3/32" cable and all required hardware.
Also works for for 1-3/4" doors

D-TEK-LM

EMX Industries Plug-in Loop Detector for Liftmaster operators ** To extent of inventory

Plug-in Loop detector for SL575 SL585 SL595 BG770 BG 79024VAC
Works with most LiftMaster gate operators
Won't work with Elite Series Mega Arm Slide & Swing
Simply plug it into the harness already in the operator
Loop lead-in wires connect to operator terminal strip
Gold plated control contacts

.......more details

Installation Manual Sell Sheet

BOARD065

Manaras Replacement Circuit Board (No Monitoring)

Replacement kit that includes BOARD060 (control board) & BOARD066R (power board)
For all Manaras operators built before October 2010
For newer models built after October 2010 use BOARD070 or replacement kit BOARD075

Installation Manual Manuel d'installation Replacement Chart Guide de remplacement

BRAKEPART019

Manaras Brake Band Assembly (Standard Brake)

Replaces BRAKEPART017 SHOE008
To use on brake drums with edges (DRUM004)
New part number is BRAKEPART019KIT

Installation Manual

39438R

Genie Garage Door Opener LED Bulb LEDB1-R 1/Pkg

Unlike other LED and CFL bulbs this bulb will reduce or eliminate radio frequency interference
Uses 10 watts but equivalent to a 60-watt bulb
Works with almost all garage door openers
Lasts up to 25000 hours
Shatter-resistant vibration-resistant
Cold weather rated up to -30C

.......more details

15-50B60LGH

Sprocket 60 Teeth 1" Bore 1/4" Keyway w/SS

60 Tooth Sprocket Kit 1" Bore x 1/4" Keyway (50B60). For use with various LiftMaster® Logic 4.0/5.0 and MAXUM DC Standard-Duty and Industrial-Duty Commercial Door Operators. Refer to the installation manual or replacement parts diagram for specific part information before ordering to ensure compatibility.

L955W

LiftMaster Multi-Function Control Panel Secuirty+ 3.0

Includes a large push bar for garage door opener operation and a light control button.
Built-in learn button enables fast & easy programming of remotes keypads myQ® accessories and Wi-Fi garage door openers.
Compatible only with LiftMaster Security+ 3.0™ garage door openers.
Warranty: 1 Year

Installation Manual Manuel d'Installation Compatibility Chart 2025 Comparison Chart 2025

SPR40B48X1

Sprocket 40B48 1" Bore 1/4" KW 2SS

48 tooth sprocket for #40 chain

LZR-MICROSCAN1T

BEA LZR Microscan Kit 1 Door with 2 Microscans Hub & Cables

Laser-based sensor system for automatic swing doors.
Time-of-flight technology used to eliminate the limitations of infrared-based devices.
Background independence eliminates nuisance detections caused by changing conditions while gyroscopes sense the movement of the door for accurate positioning.
Provides asjustable pattern depth.
Min/max door width: 20"-48" from leading edge of sensor LED
Mounting height: 75"-98" from finished floor to sensor LED

.......more details

LPEXP

LiftMaster CAPXL Loop Detector Input Board

Automatically trigger a phone call to a guard or office when a guest arrives
Mounts inside of CAPXL
Works with CAPXL and LOOPDETLM Plug In Loop Detector (Each sold separately.)
Operating Temperature -20°F to 130°F (-29°C to 54°C)
Dimensions: 2.8” x 2.3”

SB3381-PAIR

Garex End Bearing Plate 3-3/8" - 1" Commercial Sold as a Pair

BPFL205

Bearing Flangette Retainer Only PFL-205 2 pieces 2-Hole

Does not include bearing
Steel Zinc plated finish

VME1-230-1

Pivin Drapeau Electric Motor 1HP 230V 1PH FR56C

AFB120

LiftMaster Fire Access Box w/Micro Switch & Knox Key Switch Option

ll-in-one fire access box
Includes: access door with a hole for a standard or fire department padlock interior micro switch knock out for Knox key switch and standard cylinder lock
Two options for automatic gate access: 1) micro switch is activated when the padlock is removed and the front panel is opened or 2) via Knox key switch
NOTE: fire department padlock and Knox switch NOT provided

OPH-6112-M-N1-RH

Manaras Opera-H 1/2HP 120V 1Ph Monitored ECB and Nema1 Eyes

A heavy-duty industrial jackshaft operator.
For use on Standard High and Vertical Lift sectional doors.
Can also be used on Rolling doors or Grilles.
Comes with a self-engaging chain hoist for manual operation.
Clearence: side room required 15"
25 cycles per hour 100 cycles per day

.......more details

210-0053

TNR Doors CurtainLok Ass'y Kit UHMW-PE 5/pr per Kit (10pcs) ** Price by Quote Only

5 complete curtainlok's with fasteners
Curtain Lok™ for 1/4” thick Rubber Doors

TODCO-DOOR-USA

Todco Special Order Plywood Core Dry Freight Door Price by Quote Only

TODCO patented the Transportation Core™ a 3/4" 7-ply premium-grade plywood that forms the foundation of the door.
It has a hardwood outer veneer that virtually eliminates wood grain "telegraphing" giving a smoother more uniform look that lasts.
The TOUGHSHELL® system is a multi-layered formulation of liquid polymers that are specifically designed to work together on wood substrates and provide a state-of-the-art defense against moisture abrasion temperature extremes harsh chemicals even UV damage
Standard on all TODCO Dryfreight and TODCOLD® doors only EverWare™ rivets give you the protection of stainless steel – without the cost.

WASHER035

Manaras Belleville Washer 31.5 x 16.3 x.08mm Zinc Plated

Used on serveral models

02-411

LiftMaster Pull Switch Assembly Nema 4

May be used in two different ways: as an OPEN only control (all LiftMaster operators) or as an OPEN/CLOSE control (only LiftMaster operators with types B2 and S2 control wiring).
In the latter case pulling the cord will open a fully closed door close a fully opened door and reverse a closing door.
Pulling the cord whlie the door is opening will either have no effect (type B2 wiring) or will stop the door (Solid State Logic Control Board).

LRS-C1

EMX Vehicle Detector Control Unit for Single Sensor 2303-2

The Loop Replacement System (LRS) features advanced 3-axis magnetoresistive sensing technology that responds to changes in the Earth’s magnetic field caused by ferrous objects.
Three sensing elements provide measurements in the X Y and Z axes to improve detection sensitivity when used in either above or below ground installations.
The LRS is equipped with our new DETECT-ON-STOP™ or (DOS®) feature which allows detection only when a vehicle has come to a complete stop.
Backwards compatible with CS303 sensors

751-CDN

Fasteners Self Drill & Tap Tek Screw 1/4-20 x 1" (#2PT) Canadian Steel - 1000/Bag

7/16" Head
Indented hex washer head
Max RPM = 2000
Made in Canada with Canadian Steel

K94-37694-3

LiftMaster Electric Motor SL585U 1.5 HP

Replacement motor for SL585151U

LMLED1

LiftMaster LED Bulb 60W Equivalent 1/pkg

Designed to minimize radio frequency interference
Daylight white light output (5000K) ideal for garage use
800 lumen / 60w equivalent
22-year life
Durable: shatter-resistant and cold weather tested to -30° F /-34° C

WD-334642

Wayne Dalton Wireless Keyless Entry KEP4 372MHz

Opens your garage door from the outside by PIN-code
Allows garage access without keys
Wireless for fast and easy installation
Can operate multiple garage door openers at once
Rolling code technology
Weatherproof

.......more details

MYQ-SGC1WLM

LiftMaster Smart Garage Camera ***No Longer Available

The LiftMaster Smart Garage Camera™ is compatible with all myQ connected garage door openers.
It works directly with all LiftMaster openers with the Wi-Fi logo and can work with most garage door opener brands manufactured after 1993 when paired with the myQ Smart Garage™ Hub(821LMB).
myQ Connected: monitor the garage through a live feed or recorded event using the myQ app.
Video camera begins recording when motion is detected.
Easy setup with Bluetooth and magnetic mounting base.
Enables secure in-garage delivery for Amazon Prime packages

.......more details

D800-120-125

Cable Drum High Lift 800-120 1-1/4" HL Pair

Adjustable cable attachment with screw
Made of aluminum
High Lift capacity: 120" max
Flat capacity: 266" max
Rating: 2200 lb per door max
Keyway: 1 KW of 1/4" width

.......more details

105380

Amarr T-Handle Lock Kit for 2" Thick Doors Black

includes exterior & interior locking device with keys
this item is requires for use with lock bar or cable snap latch components
Need to order 109904 also this is the hardware required for installation or the lock will not work.

71-909210MD

LiftMaster Field Mod. Dual Aux. Limit Switch

K75-39337

LiftMaster Trolley Nut Kit LA500

The travel nut on LA500DC and LA500DCS gate operators may break when excessive force is applied to the gate such as being struck from a vehicle.
The travel nut can be identified as the white plastic nut that attaches to the internal lead screw of the arm.
The symptom of this problem is that the trolley assembly slides back and forth along the guide slots without mechanical restraint.
LiftMaster has created Trolley Service Kit K75-39337 with all the necessary parts and provides instructions on how to replace a damaged travel nut within an LA500 arm

Replacement instructions Instructions de remplacement

ALUM-509

Aluminum 24" x 100' Spool Midnight Surf / Vagues de Minuit # 509

20% thicker than the aluminum sold in retail stores (0.022" )
Gentek # 509
Reverse side is #431 Bright White

Colour chart

NUT-14-SS

Nut Stainless Steel 1/4"-20 Flanged Serrated Hex

STRUT-2-1/4-10'

Door Strut 2-1/4" Hemmed 10 ft Long

Reinforcement bar 2-1/4"
Electro-Galvanized
22-GA

210106

SkyLink Trolley for T-Rails

VWS-34-CHRY-OAK

Screw Colored for Vinyl Weatherstrip #8 x 3/4" 1000/Box Cherry Oak

Pan head

MD-00280

Sprocket 41B32 x 1" 1/4" Keyway 2SS 5/16 Small Hub

2 set screw 5/16

DS350

Heavy-Duty Commercial Non-Insulated Rollup Sheet Door with Interior Slide Locks

Heavy-duty Model DS-350 has statewide Florida product approval for wind load protection up to 190 mph.
This door is ideal for commercial applications with openings up to 16’ wide by 16’ high.
Heavy-duty 13-gauge guides attach to 8-gauge wall angles to give maximum wind load protection.
Installation to masonry or steel is quick and simple with no special preparation or overhead tracks needed.
A wide selection of colors to choose from
Made to Order

.......more details

25-60100

Truck Door Fork Lift Plate

Steel Construction
Black E-coat finish
Allows use of fork lift to open door from truck bay or when loads shift against door
Cross Reference: T # 69131 W #1092
Dimensions: 18" long x 5.5" tall with 1.5" lip

OCDFX1

Overhead Door 1-Btn Transmitter 315/390 Mhz *** No Longer Available

Dual Frequency transmitter that will work on all OHD/Genie brand 315 or 390 rolling code commercial openers including the the RX OHD commercial opener.
Part Number: OCDFX1.S GIDFX1.S

Programming Instructions

886LMW

LiftMaster Motion-Detecting Control Panel Sec+ 2.0 Wi-Fi

Push button for garage door operation
Motion-detector automatically turns on the light when movement is detected
150 degree sensing angle for motion sensor
Program remote controls and set up Wi-Fi directly from the control panel
Light run-time is 4 1/2 minutes with adjustable light timer option
On/Off switch for deactivation of motion-detecting function

.......more details

LVB420-11SF

Steel-Faced Laminated Bumper Black 4" Projection Vertical Installation 20" x 11" Sold Individually

Used on docks where excessive friction from up and down trailer movement occurs (yard jockeys air ride trailers etc.).
Can be used in material handling application where medium to heavy dock protection is required.
5/8" anchor bolts mounted through pre-drilled holes into dock or can be welded to curb angle.
Steel face is 3/8" thick heavy duty high carbon steel that is mounted over a laminated dock bumper.
Plate to be welded to 2 or 3 steel support brackets which are to extend back to the 3/4" supporting rods.
Brackets to be punched with elongated holes to allow steel face to "float" upon impact.

.......more details

28103

Pillow Block Bearing Cast Iron 1" Bore

MV-00295

Micanan Fraba Nema 4/4X RAY-RT-HD with Reflector

Monitored Retroreflective photocell
Sensing distance: 50 ft
Includes bracket and long range reflector

.218-325-DS75

Mini Storage Spring for DS75 4x7 Door

Spring only with loop ends

7-28-1A

Lynx Standard Barlock Kit Bars sold Separately

Bars are sold separately.
Hardware bag for doors 12' and under

Assembly Manual

BOLT027

Manaras Hex Bolt 3/8-16 x 1-1/2"

Used on old MJH

DL-4000-8

Dock Leveler Retainer Galv. Steel Weldable 8' Long *** To Extent of Inventory

Weldable to sides of dock leveler
Use with 4007 aluminum retainer & light brush (not included).
Vinyl insert slides into this outer retainer.

K74-33015

LiftMaster Electrical Box Replacement Kit L3 **to extent of inventory

For models T GT and GH L3

K72-33192

LiftMaster Limit Shaft Kit NEMA 4 & 4X for H J HJ GH GT T & APT Operators

For: NEMA 4 & 4X for H J HJ GH GT T & APT Operators
Shaft measures 12" in length
Compatible with Logic 4 and Logic 5 operators

RA-AD-WWS-MULTI

Lynx Wireless Wall Station AD455 372 MHz

Wireless for easy installation anywhere
Controls door open-close light on-off
Programmable pet opening (Opens to a pre-selected height of 6"-30")
Vacation Slide-Lock: Disables remote transmitters keyless entries and wall stations.
10-second closing safety delay
Transmitter program button

.......more details

Programming Instructions Compatibility chart

16FT-TROLLEY-SET

LiftMaster 16ft Double Angle Rail Set for Comm. Trolley Ops 10-5816-P (2 pcs) *Actual length 227"*

Double Angle Rails for doors up to 16' high
Works with models : MT T GT APT
Indicated selling price is calculated with the purchase of a commercial operator. For pricing on a double angle rail only please contact us
Actual Length 18' 11"

MP-00044

Micanan Drive Chain #40 Modification for Trolley Operators 18' High Door In Lieu of #41

Chain modification when purchased with any of the following operators; PRO-T TB APT and GT

B025

Rolling Steel Assembled Angles 2" x 2"x 3/16" Sold per Foot

Includes angles astragal and 1/2 slat

CF-101-8

Commercial Side & Top Weather-Strip 8' Long Aluminum / Vinyl

Same as Garaga CF101

510.3021.00

Whiting Stainless Steel Exterior Hardware Package with #77 Lock for Dry Freight Door

Optional package when a door is ordered. Includes SS rivets and installation.

69C

Skylink 1-Button Universal Keychain Remote *** NLA

It's small enough to carry in your pocket or purse
The 69C is a great universal remote and it is compatible with almost any garage door up to 2007 (see compatibility chart for exact brand names).
It has just one simple button and a unique keychain attachment which makes it ideal for use with convertibles motorcycles bicycles or any other vehicle without the usual sun visor.
It connects to your garage door using a series of DIP switches making it simple to program it even if your garage door dates as far back as the 1980s.
Model 69c is not compatible with Stanley "Securecode"
Compatible frequency: 390/318/315/310 Mhz

.......more details

Compatibility Chart

19-5816-NP

LiftMaster Trolley Chain Pack #48 for 16ft Door Nickel Plated

Chain pack only

2200-030

Linear Limit Nut

Used on various Linear Gate operators

27024

Doorlec Electric Motor TEFC 3/4HP 115/230V DC403

ase mount

Wiring diagram for 120V Wiring diagram for 230V

T101L5

LiftMaster 1 HP 115/230V 1P Commercial Trolley Operator Logic 5

Trolley low profile with brake
Suspended from the ceiling the operators are used on sectional overhead doors with standard lift.
T operators are directly attached to drive and control the door.
MyQ® Technology enables you to securely monitor and control your facility operator and lights with your smartphone tablet or computer for greater peace of mind.
Security+ 2.0™ safeguards your facility – with every click a new code is sent to the commercial door operator so the door opens only for you.

Installation Manual Manuel d'Installation Sell sheet Brochure

TCR-1

Tri-Code Receiver Single Channel ** DISCONTINUED

Single channel receiver compatible with Linear Delta Multi-Code and Stanley radios
Three position direct connect tabs for commercial and residential garage door openers

Programming Instructions

831T

Allstar Stationary TransmitterO/C/S 3-Btn 1-Door 318 MHz 107483 *** To extent of inventory

Open/Close/Stop stationary remote for 1 door.
Designed for commercial automatic door and gate operator applications.
This transmitter can operate a single receiver connected to one operator
Compatible with 3-channel Allstar and MVP receivers
Easy access to battery and coding switch
Power: 9-volt battery

.......more details

Programming Instructions

K72-12506

LiftMaster Clutch Shaft Kit (1/3 & 1/2HP)

For 1/3 and 1/2 HP models - L5

753

Fasteners Self Drill & Tap Tek Screw 1/4-20 x 1" (#3PT) 1000/Box

Indented Hex Washer Head
7/16" Head
Max RPM = 2000
#3 point = long cutting edge (less thread)

41D7742-7

LiftMaster Travel Module

Fits models 8165 8355 & 8155W

104078

Allstar Wireless Keypad 9931-WKE 318 MHz ** To Extent of Inventory

Compatible with Allstar and MVP receivers
4-digit access code
Backlit keys
Operate LED
Power: 9-volt battery
Codes: 19683

.......more details

Programming Instructions

BK110/PR

Light Duty End Bearing Plate 3-3/8" with Bearing - EBF 338 Residential Sold as a Pair - LH/RH

With C16-32F bearing
Galvanized steel
3-3/8" shaft offset
Flange allows plate to be bolted to the wall for additional support
Same as part number 209

41D1739-1

LiftMaster Motor & Travel Module (041-0236-000)

For model: 8550
Also known as: 41D8006-1 41D1739-1 41D1624-1 041D1624-1 41-0236-000

.250-2-L

Cut-to-Length Torsion Spring .250 x 2" Left Hand Wound Green

Priced per inch - cones sold seperately
For factory installed cones use part no. C-200-INSTALLED

8FT-RAIL-CHAIN

LiftMaster 8' chain drive rail 1708LMC - colour code: Blue

#48 chain size
Price reflects cost if purchased with an opener

111010.0001

Overhead Door Serpentine VBelt 27" (6EPJ683)

Serpentine belt 27" long
Fits Genie GCL-T Trolley operator
Some Overhead drawbar models: JST RSX RMX

41A5021-1ATS

LiftMaster Circuit Board Assembly (41A5021-1HATS)

Board: Security+ 390 MHz
Assembly includes: circuit board and end panel
Also includes: 1 Multi-Function wall ctrl panel - 2 wire
For: ATS211 & ATS211R
For newer model ATS use replacement board 41A5021-9G-315
Same as 041A5021-1HATS

.......more details

.306_5-1/4"-LH

Torsion Spring .306 x 5-1/4" x 12ft LH Red

Wire size: .306
Inside diameter: 5-1/4"
Length: 12 ft

T-639

FL-Allstar 3-btn 9-Door O/C/S Transmitter 107476-311 MHz

This remote can control (open-close-stop) up to nine doors.
It has a eight switches encoder with three positions: + 0 and - .
Manufacturer's model number: 639T (190-107476)
Dimensions: 6 1/4" x 3 3/8" x 1 3/8".

Programming Instructions

41K4629

LiftMaster CPS Interface Black Box (CPICARD)

Allows CPS-U photoeyes to provide a 'NO' contact
Interface is included with CPS & CPS-N4
Also known as 041K4629 1C4489 41K4629 41C4489 CPI

23-10041-1

LiftMaster Double Limit Switch Commercial DP DT

Double limit switch DP DT
For LiftMaster and Micanan operators

41A4373A

LiftMaster Safety Sensor Kit 1993-1998 ** Replaced by 041-0136 & 041-0155-000

For LiftMaster Chamberlain & Sears openers built from 1993-1998
Kit includes: Saftey sensors 24" wire and gel connectors
Replacement: 041-0136 with the 041-0155-000 brackets

8FT-TROLLEY-SET

LiftMaster 8ft Double Angle Rail Set for Comm. Trolley Ops 19-5808-P (2pcs) *Actual length 131"*

Double Angle Rails for doors up to 8' 6" high
Works with models : MT T GT APT
Indicated selling price is calculated with the purchase of a commercial operator. For pricing on a double angle rail only please contact us

VBELT_5L350

Manaras VBelt 5L 35" - repl. by B32

Used on MTH MTBH MSL models
Type B
Inside length 32 inches

HAE00001

Linear Wall Station

Wired wall station with light and lock features.
For LSO LDO LCO

219110

Capacitor 1/2 HP 53-64 MFD 250V

For LDO50 only

4005-16FT

Aluminum Retainer only for Heavy Brush 16' Long 180 degree

For angle application (180 degree)
For use with Heavy Brush

25-10001

Truck Door End Hinge for Todco Roll-Up Doors

Zinc plated steel construction
Four-knuckled to ensure smooth door operation
Cross Reference: T #69035 W #4007 220000

41D7675

LiftMaster Receiver Logic Board 2.0

Also known as: 45ACT

K72-13058

LiftMaster Intermediate Shaft Kit APT

Kit contains: Shaft Bearings Roll Pins Washers and Sprockets (41B10 x 3/4" & 41B16 x 3/4")

PRO-GJ-5011R-RH

Micanan 1/2HP 115V 1P Gearhead Operator with Mechanical Contactor

Includes 3-btn O/C/S control station Nema 1
External radio control terminal strip
Heavy duty worm gear reduction in oil bath gearbox
1/2 HP high starting torque instant reverssssible motor
#41 roller chain drive & 41B19 operator drive sprocket
Emergency floor level disconnect for manual operation

.......more details

041A4202-6B

LiftMaster WALL CONTROL PANEL

Wall Control Panel Replacement Kit. For use with various LiftMaster® Security+® Garage Door Openers. Check the manual or replacement parts diagram for specific part information before ordering to ensure compatibility.
Also known as: 41A4202-4 41A4202-6B

L958W

LiftMaster Smart Control Panel Security+ 3.0

LCD screen displays temperature time and maintenance alerts.
Motion detector activates the garage door opener lights as soon as movement is detected.
Timer-to-Close allows you to automatically close your door after a pre-programmed number of minutes.
Lock function blocks the garage door from being opened by remote controls.
Includes a push bar for garage door opener operation and a light control button.
Built-in learn button enables fast & easy programming of remotes keypads myQ® accessories and Wi-Fi garage door openers.

.......more details

K41-0381-000

LiftMaster Toroidal Transformer 700lb / 120VAC-240VAC

For Maxum ops

10PBR45LL

Push Plate S/S 4.5" Round Large Logo

Compatible with 900 433 and 300mhz.
May be hardwired to the operator or connected to BEA transmitters.

233817

Operator Reinforced Bracket 18-24" Adjustable with Hinge Kit Galvanized

Also known as ARB or ORB brackets
Kit includes: 5/16" Clevis Pin Hitch Pin 1/4-20x5/8" Carriage Bolt 1/4-20 Serrated Flange Nut
Hinge : Male Hinge 13 GA WIDE SD (MATERIAL STEEL 13 GA)

TDC1222-12

Liftmaster Comm. 12FT Trolley Angle set (10-5812-P x 2) and #41 chain pack (TDC41-12) ***Actual length 179"***

Double Angle Rails for doors up to 12'6" high
Includes #41 chain pack

GH4416-40

Green Hinge 4-Panel Residential System Set

The Green Hinge System provides a close tight seal of your door to your building eliminating gaps and saving energy and money!
Patented spring-loaded garage door hinge system that allows automatic adjustment of the overhead garage door closing up to 1/4in side gap
Reduces dirt dust bugs rain & moisture
Quick and Simple installation
Fits Residential & Commercial Doors
100% Made & Assembled in the USA

.......more details

WD-8300

Wayne Dalton Classic Steel Garage Door ** By Quote Only

Heavy-gauge steel and a thick layer of insulation provides a smooth dependable operation that excels in appearance and strength.
R-VALUE: 12.12 / 16.12
WD's best-insulated residential garage doors feature two layers of steel surrounding a thick layer of foamed-in-place polyurethane insulation.

T-931-S

FL-Heddolf 1-btn Transmitter 311 MHz

Also known as 311DEK31V2

Installation manual

BEA-10-IXIO-ST

BEA Presence Sensor for Automatic Sliding Doors

IXIO-ST is an effective versatile and easy-to-use presence sensor for automatic sliding doors.
It can be used for both clear door openings and side-lite protection
Precise infrared curtains coupled with visible alignment beams make the IXIO-ST extremely safe and easy to adjust.
This state-of-the-art sensor features an on-board LCD screen that streamlines the installation and setup processes.
Intelligent Solution :On board microprocessor optimizes data analysis monitors sensor performance and enables system integration
Mounting height: 6’6” – 11’6”

.......more details