Devanco Canada

 
User Name:
Password:
Remember Me:
Forgot your password
Request a Login
Home
PED72

Pedestal Post 72" Gooseneck Pad Mount

  • Black powder coat finish
  • Faceplate with universal hole pattern to fit almost any access device
  • 2" x 2" square post
  • Neck is bent with a 6 in. center radius giving a tight professional look
69625

Marantec Programming Connector

  • Programming connector for use with M3 remotes and Wireless Keyless Entry. Also used with M13 Wireless Keyless Entry
GITR-3

Genie Intellicode 3-Button Remote 37517S 390 MHz *** To extent of Inventory

  • Replaces Series II GIT-1 GIT-2 & GIT-3
  • Battery Instructions Visor Clip Included
  • Note: Only the far right of the three buttons (1 dot button) will operate those older Genie Intellicode units built from 1995 through 1997.
  • If you have a Genie unit built in 1995 1996 or 1997 this is the only remote that Genie presently makes to operate the Genie garage door openers built during these years.
  • In this special case the remotes can only be used as 1 button remotes and no other multi-button Genie remote is compatible.
Programming InstructionsInstructions de programmation
41AC050-2

LiftMaster Electronic Circuit Board Assembly 315MHz

  • Fits 3265 PD612C
  • Replaces 41AC150-2 (board only - need to install on exisiting panel)
  • Also known as 41AC050 41AC050-2M
CPS-OPEN4

LiftMaster Monitored Dual-Sided Photo Eyes

  • For use with sectional or rolling doors.
  • May be installed in areas exposed to rain or moisture
  • Rubberized for more durability
  • Will work on LiftMaster residential operators
Installation ManualManuel d'InstallationSell Sheet
MT5011U

LiftMaster 1/2 HP 120 Volt Medium Duty Trolley Operator

  • 1/2 HP 120 volt 1 phase medium-duty logic trolley operator
  • Medium-duty logic board with integral 315 MHz radio receiver
  • CPSU commercial photoeyes included
  • 4L V-Belt #48 drive chain adjustable friction clutch
  • Use on standard lift sectional doors up to 14' high and up to 12 cycles per hour
  • 2 year warranty
    • .......more details
Installation manualManuel d'installationProduct guideGuide de produit
08-11013

LiftMaster Bevel Gear 3/4" ID

  • Fits the LiftMaster GH operator
08-11012

LiftMaster Bevel Gear 5/8" ID

  • Fits LiftMaster GH operator
STATION081

Manaras Push Button Control Station 1-Button Nema 4/12

  • 1-button 1 N/O contact
  • Plastic
25605R

Genie Inner Slide Kit for Chain Drive Models

  • The innerslide attaches to the chain and connects the carriage to the chain
  • Works on the following Genie and Overhead Door models:
  • IC250 PMX80 PMX500-IC/B IC250/B PMX85 ALC Series PMX60 PMX300-IC/A RCD Series PMX65 PMX500IC/A PMX75 PMX-IC/B
  • SP99 – SP SERIES LD100-500-100A-550A LAD125-555
  • CM6000-6000A-60-70-80-60S
  • OHD-696 696CD + Others
    • .......more details
736

Fasteners Round Head Carriage Bolt 5/16-18 x 3/4" Gr 2 1000/Box

  • Full length thread
  • Max torque = 12
71-90503000

LiftMaster Non-Resettable Counter Field Kit

  • A 6-digit non-resettable 24VAC electro-mechanical counter is mounted in the operator control enclosure.
  • This devise counts the number of times the CLOSE coil is energized or whenever the operator reaches an auxiliary open limit switch.
  • This corresponds to the number of complete door cycles of use.
Installation Manual
Z9405

Coupler 1-1/4" Bore Non-Adjustable

  • Malleable iron for strength
  • Set screws and jamb nuts installed
  • 1-1/4" Bore with 1/4" keyway
  • Length: 3.9"
MWRTA12B

Miller Edge Wireless Transmitter with Audible Alarm and 1 Channel Receiver

  • For 2-wire edges
  • Was previously MWRTA02A now has a new board making installation easier
  • Includes single channel receiver (MWR12A) and transmitter (MWTA12) with audible low battery alarm.
  • This feature that activates when the battery has only 25% of its life remaining indicating the battery should be replaced. The alarm sounds for 5 to 10 seconds at 1 to 2 minute intervals.
  • The receiver operates on either 12 or 24 volt AC/DC and provides N.O. or N.C. output.
Q400-D

LiftMaster Circuit Board Assembly with Reset (Q400E)

104078

Allstar Wireless Keypad 9931-WKE 318 MHz ** To Extent of Inventory

  • Compatible with Allstar and MVP receivers
  • 4-digit access code
  • Backlit keys
  • Operate LED
  • Power: 9-volt battery
  • Codes: 19683
    • .......more details
Programming Instructions
41C3196

LiftMaster Antenna for Co-Axial Receiver

  • Wire antenna kit same as what is supplied in a 312 / 412 HMC
MK-00493

Reversing Contactor Telemecanique 24V Coil (MK-01179)

  • Same as MK-01179
1013-1-1/4-16'

Rigid Vinyl Bottom Retainer L-Shaped 16' Long

  • For door thickness: 1-1/4"
BK110/PR

Light Duty End Bearing Plate 3-3/8" with Bearing - EBF 338 Residential Sold as a Pair - LH/RH

  • With C16-32F bearing
  • Galvanized steel
  • 3-3/8" shaft offset
  • Flange allows plate to be bolted to the wall for additional support
  • Same as part number 209
GRD-2

Linear 2-Channel Delta3 Gate Receiver 310 MHz (DNR00102)

  • Auto voltage sensing - no jumpers to set
  • Two Form ”A” (normally open) relays rated at 30 Volts AC/DC up to 5 Amps
  • Supplied with whip antenna three feet of coaxial cable and bulkhead connector
  • Power: 12 - 30 VAC or 10.5 - 30 VDC
  • Codes: 128 (set by dip switches)
  • RF frequency: 310 MHz
    • .......more details
Programming Instructions
MGR-2

Linear 2-Channel MegaCode Gate Receiver 318 MHz *** To Extent of Inventory

  • Two Form ”A” (normally open) relays rated at 30 Volts AC/DC up to 5 Amps
  • Supplied with whip antenna three feet of coaxial cable and bulkhead connector
  • Memory: storage for up to 40 MegaCode transmitters
  • Power: 12 - 30 VAC or 10.5 - 30 VDC
  • Codes: 1000000+ (MegaCode format)
  • RF frequency: 318 MHz
    • .......more details
Installation Manual
STAR450-315

LiftMaster Commercial Access Control Receiver 315MHz *** Discontinued

  • Rapid learn feature programs multiple transmitters in just seconds
  • Ideal for gated communities parking lotsand garages.
  • Works on a tri-band frequency
Programming InstructionsSell sheet
34299R

Genie Deluxe Wall Console Series II ** Discontinued Replaced by 39165R

  • Deluxe Wall Console for Genie Intellicode Series II only
  • 3 function console: operates door opener controls lights and security lock out switch
  • Compatible with Code Dodger
  • Same as previous part number: GPWC-2WLB
.262-2-L

Cut-to-Length Torsion Spring .262 x 2" Left Hand Wound Red/Yellow

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-200-INSTALLED
.218-2-L

Cut-to-Length Torsion Spring .218 x 2" Left Hand Wound Yellow/Orange

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-200-INSTALLED
MX00034-110V

Micanan Brake Assembly for PRO-HHD with 120V Solenoid (MX00206-110)

  • Complete brake assembly including 120V solenoid - solenoid cover sold separately part #MM00011
86LMC

LiftMaster Antenna Extension Kit

  • For use with 312HMC 412HMC 422LMC and 423LMC
  • Kit contains 15ft of cable
7FT-RAIL-CHAIN

LiftMaster 7' chain drive rail 1707LMC - colour code: Green

  • #48 chain size
  • Price reflects cost if purchased with an opener
45DCT

LiftMaster Circuit Board

  • Board: Tri-band Security+ 2.0
  • DC Chain/ Belt Drive model
  • Fits: 8360 8550
  • Also known as; 45DCBR1A 041D7356 1D7356 41DCBC1A 41DCBC3A 41DCCC2A 41DCBC5A 45DCCL5A 45DCCL3A 45DCCL1A 45DCCR5A 41D7356 45DCCR3A 45DCCR1A 001D7356 41DCCC1A 41DCCC3A 45DCJL5A 45DCRL1A 41DCCC5A 45DCRL3A 45DCJL1A 45DCJL3A 45DCBL5A 45DCBL3A 45DCBL1A 45DCBR5A 45DCRL 45DCBR3A 47DCCR1 1D8363 045DCT 45DCBL1 45DCBL2 45DCBL3 45DCBL4 45DCBL5 45DCCL1 45DCCL2 45DCCL3 45DCCL4 45DCCL5 45DCBR1 45DCBR2 45DCBR3 45DCBR4 45DCBR5 45DCCR1 45DCCR2 45DCCR3 45DCCR4 45DCCR5
7001-12-W/B

Commercial Side & Top Weather-Strip 12' Long - White and Black (WB)

  • White galvanized steel with black dual fin vinyl.
  • Commercial and Residential use.
  • Steel is notched on both ends for easier installation.
  • Full case quantity only (10)
CR2032

Maxcell 3V Lithium Button Cell

881LMW

LiftMaster Motion-Detecting Control Panel with TTC Sec+ 2.0 Wi-Fi

  • Push button for garage door operation
  • Motion-detector automatically turns on the light when movement is detected
  • 150 degree sensing angle for motion sensor
  • Program remote controls Wi-Fi Garage Door Openers and MyQ® enabled accessories directly from the control panel
  • Timer-to-Close feature automatically closes the garage door after a pre-programmed number of minutes - 1 5 or 10
  • Light run-time is 4 1/2 minutes with adjustable light timer option
    • .......more details
.406_6"-LH

Torsion Spring .406 x 6" x 12ft LH Blue/Yellow

  • Wire size: .406
  • Inside diameter: 6"
  • Length: 12 ft
.468_5-1/4"-LH

Torsion Spring .468 x 5-1/4" x 12ft LH Blue/Orange **NLA

  • Wire size: .468
  • Inside diameter: 5-1/4"
  • Length: 12 ft
.312_3-3/4"-LH

Torsion Spring .312 x 3-3/4" x 12ft LH Yellow

  • Wire size: .312
  • Inside diameter: 3-3/4"
  • Length: 12 ft
71-B120

LiftMaster Interior Mount Solenoid Brake 115V

Instruction Manual
71-B120H

LiftMaster Interior Brake Kit with Cable 115V (Logic 3 4 and Models)

  • Interior mount brake kit for operation with chain hoist
  • Works on mechanical operators as well as logic 2 3 4 and early logic 5 motors.
Instruction Manual
29-31245

LiftMaster Relay 12VDC 250VAC 4-Pin SPDT C & D relay 3-phase only

  • C & D relay 3-phase only
41B5669

LiftMaster Belt Clip and Link Kit

  • Used for splicing "New-Syle" belt
29-31244

LiftMaster Relay 24VDC 6-Pin DPST (A & B Relay) All Operators

STRIP_CURTAIN

Complete PVC Strip Curtains Made to Order

  • Please call us for price and delivery we can supply complete doors and replacement PVC strips for existing installations. Many different sizes and colors are available
41AC075-2S

LiftMaster Circuit Board Assembly for Single and Double Capacitor Models 315Mhz

  • Assembly includes: End panel Logic board and Light socket
  • For chain drive units with two lights ie..3575 3585 3595 PD752D and PD758D
30B363

Capacitor Motor Start 53 uF - 64 uF 220V *** No Longer Available

19-40HL

Half Link #40

  • Half link for #40 chain
  • ANSI Standard Carbon Steel
19-50HL

Half (Offset) Link #50

  • Half link for #50 chain
  • ANSI Standard Carbon Steel
CAM011

Manaras Limit Cam

  • Limit cam for Mountshaft018A 018B
  • 2 cam's required per shaft
19-48HL

Half Link #48

  • Half link for #48 chain (#410)
41C4398A

LiftMaster RPM Sensor Kit

  • RPM sensor assembly 1986 - present
Installation Manual_bilingual
144C56

LiftMaster Idler - Cable Pulley for chain drive

  • For square rail assemblies
  • Same as 144C0056
.306_5-1/4"-RH

Torsion Spring .306 x 5-1/4" x 12ft RH Red

  • Wire size: .306
  • Inside diameter: 5-1/4"
  • Length: 12 ft
.421_3-3/4"-RH

Torsion Spring .421 x 3-3/4" x 12ft RH Gold

  • Wire size: .421
  • Inside diameter: 3-3/4"
  • Length: 12 ft
.363_3-3/4"-RH

Torsion Spring .363 x 3-3/4" x 12ft RH Green/White

  • Wire size: .363
  • Inside diameter: 3-3/4"
  • Length: 12 ft
.343_2-5/8"-RH

Torsion Spring .343 x 2-5/8" x 12ft RH Blue/Red

  • Wire size: .343
  • Inside diameter: 2-5/8"
  • Length: 12 ft
.225_2"-RH

Torsion Spring .225 x 2" x 12ft RH Orange/Green

  • Wire size: .225
  • Inside diameter: 2"
  • Length: 12 ft
25-60652

Truck Door Reefer Bottom Roller Bracket Assembly for Whiting Style Doors ** To Extent of Inventory

  • Steel construction Black E-coat finish
  • Consist of roller clamp wear plate stud plate and 5/16" lock nuts
  • Stainless steel studs and nuts
  • Cross ref: 5600
17300

Doorlec DC-3000T3 3-btn Transmitter 313 MHz

  • One block of 10 dip-switches for programming
  • Will activate 3 Doorlec 17307 receivers (DC-3000R)
  • Includes visor clip and 9V battery
Programming Instructions
17311

Doorlec AT1035D 1-btn Mini Transmitter 313 MHz ** To extent of inventory

  • One block of 10 dip-switches for programming
  • Compatible with Doorlec 17307 receiver (DC-3000R)
  • Includes 12V battery (GP23A)
MK00641

Micanan Smart 10.0 Full Feature Circuit Board Monitored with 5 Relays

  • For 1/3 1/2 and 3/4 Hp - 110/220V 1p 230V 3p
  • Board has P1 & P2 terminals
  • Up to 20 transmitters can be programmed
Instructions Manual
PRO-LH-5011U-RH

Micanan 1/2HP 115V 1P Medium-Duty Jackshaft N1 Eyes Monitored ECB Right Hand

  • Designed for use on commercial sectional doors with high or vertical lift
  • May also be used on small rolling grilles with max. 15 cycles per hour
  • Includes chain hoist
  • Includes solenoid brake
  • On board receiver with antenna
  • On-Board receiver holds up to 20 transmitters
    • .......more details
Installation manualSpecification sheet
MJ00002

Micanan Brake Shoe - Right **No Longer Available**

  • Only available in complete kit # MJ00013 or MJ00014 for PRO-GH
PL-A03-OLD-BRD

Lynx Replacement Logic Board Old Version ** This item is no longer available (NLA) **

  • Old version board works on operators with a blue cover
  • Replacement logic board for Napoleon/Lynx Proline garage door opener
  • For openers built before 2008
  • This board has a transformer (the new board does not)
H14GHALF

Half Hinge #1 x 14 gauge

  • Bright zinc plated 14-gauge steel hinge
  • For use with 7/16" diameter stem rollers
  • Full body hinge 1-5/8" wide with slotted holes
SEL2641R433-IP

Erone 2-Relay Stand Alone Receiver Pulse/Latch or Delayed Relay Output 433MHz

  • Up to 85 transmitter keys
  • 1 NO relay + 1 NO/NC relay (24VA)
  • Self-learning memorization
  • Standard pulse latched or timed relay output
  • Power requirements: 12/24Vac/dc
  • Dimensions: 105 x 45 x 28mm (4.3 x 1.75 x 1.1in)
    • .......more details
Instruction ManualSell SheetWireless System Chart
MOUNTSHAFT014

Manaras Clutch Shaft Kit for Opera-H (OPH)

  • Input / clutch shaft kit for Manaras Opera-H
Drawing
VBELT_5L350

Manaras VBelt 5L 35" - repl. by B32

  • Used on MTH MTBH MSL models
  • Type B
  • Inside length 32 inches
DRUM005

Manaras Steel Brake Drum 5/8" - replaces DRUM004

  • Replaces DRUM004
  • Brake drum with edges for current braking systems (2000 - current)
  • Used on all Manaras operators except Gear Head models.
  • Use with BRAKEPART019 (old part BRAKEPART017)
BRAKE011

Manaras Band Brake Assembly Kit

  • Does not include solenoid
  • Replacement brake kit for operators that are belt driven and have a brake. Works with OSH OTBH
  • Will not work with Gear-Head operators
Installation Manual
DISCONNECT001

Manaras Floor Level Disconnect Lever

RADIO-15

Manaras MRX-1000 1-Channel 24V Receiver with Commercial Antenna 313 MHz ** To extent of inventory

  • Controls one operator with MT series transmitters.
  • Operates on 24VAC.
  • A LED indicates that the unit has been activated.
  • Can be installed directly onto the control box of a Manaras operator.
  • Includes a commercial receiver antenna for increased range.
  • Will be replaced by RADIO-RE901A
    • .......more details
Installation Instructions
STATION078

Manaras 3-btn Push-Button Control Station Nema 4/12

  • 2 N/O contacts and 1 N/C contact for stop.
  • Surface mount.
Sell sheet
MDR

Linear 1-Channel MegaCode Receiver 318 MHz *** Discontinued

  • Activates one device
  • Wire lead antenna
  • Mounting bracket supplied
  • Memory: storage for up to 10 MegaCode transmitters
  • Power: 24 VAC/VDC
  • Codes: 1000000+ (MegaCode format)
    • .......more details
Programming Instructions
733T

Allstar 3-btn 3-Door O/C/S Transmitter 107477 318 MHz *** Replaced by P-733T

  • Open/Close/Stop remote for 3 doors
  • Compatible with 3-channel Allstar and MVP receivers
  • Stationary mounting
  • Easy access to battery and coding switch
  • Power: 9-volt battery
  • Codes: 6561 (set by eight trinary dip switches)
    • .......more details
Programming Instructions
MCT-3

Linear 3-btn MegaCode Transmitter 318 MHz ** Use MTS3

  • Activates three 318 MHz MegaCode receivers
  • Test/operate LED
  • Visor mounting clip supplied
  • Two CR2032 batteries included
  • Codes: 1000000+ (MegaCode format)
  • Dimensions: 3" W x 1.875" H x .625" D
    • .......more details
Programming Instructions
217436

Linear Drive Sprocket - Chain (HCT)

HAE00001

Linear Wall Station

  • Wired wall station with light and lock features.
  • For LSO LDO LCO
RV-300

3" Vinyl Insert for Brush Retainer per foot

  • Color: Black
138BL

1-3/8" Light Brush Insert 6ft Long

  • Polypropylene bristles
  • Same as model MS1702
4003-12FT

Aluminum Retainer only for Light Brush 12' Long 90 and 180 degree

  • For angle application (90 degree & 180 degree).
  • For use with Light Brush or Vinyl Insert.
4003-6FT

Aluminum Retainer only for Light Brush 6' Long 90 and 180 degree

  • For angle application (90 degree & 180 degree).
  • For use with Light Brush or Vinyl Insert.
1003-4"-200FT

Bottom U-Rubber 4" Black 200' Long

  • 200ft spool of vinyl insert.
1019-1-3/8-10'

Rigid Vinyl Bottom Retainer Flat 10' Long

  • Black - for door thickness of 1-3/8"
1006-2-24'

Rigid Vinyl Bottom Retainer U-Shaped 24' Long

  • Black with flexible fin to touch door face.
  • For door thickness 2"
1006-1-3/8-12'

Rigid Vinyl Bottom Retainer U-Shaped 12' Long

  • Black with flexible fin to touch door face.
  • For door thickness 1-3/8"
1006-1-3/4-16'

Rigid Vinyl Bottom Retainer U-Shaped 16' Long

  • Black with flexible fin to touch door face.
  • For door thickness 1-3/4"
1006-1-3/4-14'

Rigid Vinyl Bottom Retainer U-Shaped 14' Long

  • Black with flexible fin to touch door face.
  • For door thickness 1-3/4"
1006-1-1/2-16'

Rigid Vinyl Bottom Retainer U-Shaped 16' Long

  • Black with flexible fin to touch door face.
  • For door thickness 1-1/2"
1005-1-1/2-16'

Aluminum Bottom Retainer U-Shaped 16' Long

  • For door thickness 1-1/2"
1005-1-1/2-24'

Aluminum Bottom Retainer U-Shaped 24' Long

  • For door thickness 1-1/2"
1003-1-3/8-10'

Aluminum Bottom Retainer L-Shaped

  • For 1-3/8" thick doors.
1104-10FT-DK-BR

Residential Side & Top PVC Weather-Strip with cap 10' Long - Commercial Brown (DN)

  • Commercial brown rigid vinyl retainer with commercial brown flexible vinyl seal.
  • Dual fin vinyl.
  • Comes with cap to hide screws.
HSC-600

Hand Swager 1/16" - 3/16"

  • Swages 1/16" 3/32" 1/8" 5/32" or 3/16"
  • Tool length is 25-1/2"
  • Wire rope cutting capacity 3/16”
  • Made in Japan
1104-16FT-CREAM

Residential Side & Top PVC Weather-Strip with cap 16' Long - Cream (C)

  • Cream rigid vinyl retainer with cream flexible vinyl seal.
  • Dual fin vinyl.
  • Comes with cap to hide screws.
  • Also known as Almond
1104-12FT-CREAM

Residential Side & Top PVC Weather-Strip with cap 12' Long - Cream (C)

  • Cream rigid vinyl retainer with cream flexible vinyl seal.
  • Dual fin vinyl.
  • Comes with cap to hide screws.
  • Also known as Almond
1104-9FT-CREAM

Residential Side & Top PVC Weather-Strip with cap 9' Long - Cream (C)

  • Cream rigid vinyl retainer with cream flexible vinyl seal.
  • Dual fin vinyl.
  • Comes with cap to hide screws.
  • Also known as Almond
1106-14-BLACK

Commercial Side & Top Weather-Strip 14' Long - Black

  • Aluminum retainer with black dual fin vinyl
1102-10-BLACK

Commercial Side & Top Weather-Strip 10' Long - Black

  • Aluminum retainer with black heavy-duty dual fin vinyl.
1102-14-BLACK

Commercial Side & Top Weather-Strip 14' Long - Black

  • Aluminum retainer with black heavy-duty dual fin vinyl.
28-32072

Truck Door 2" Horizontal Track with 8" Radius 107" Curbside (RH) for Whiting Roll-Up Doors

  • SPECS: Length: 107" Fits door sizes: Up to 96" high
  • Cross Reference: W #11-2
  • Galvanized steel 14 gauge construction
  • Tongue and groove for proper alignment at joints
  • 8" radius
  • For use with 2" diameter steel or nylon rollers
    • .......more details
27-20202

Truck Door Winding Cone for Dual Spring Assembly for Whiting Roll-Up Doors (2-3/16")

  • Zinc die cast construction.
  • Universal design that will work for both Curbside (RH) and Roadside (LH) wound springs.
  • Cross Reference: W #2518
  • 2-3/16" I.D.