Devanco Canada - Get The Right Garage Door Opener‎ and Parts

CPS-3

LiftMaster Option Card with CPS-L Eyes

For applications requiring two sets of photoeyes ( CPS-III)

Installation Manual

AW-12A

Miller Edge Air Wave Switch in NEMA 4 Enclosure

Air pressure is lead via a hose or pipe to a diaphragm contact. This contact converts the positive or negative pressure into an electrical contact and pulse.
Applications: commercial sectional doors rolling doors and mass transit
Works on doors up to 60ft
Can be used with standard pneumatic hose and Miller Edge extrusion
Sensitivity: 2mm to 500mm
Ambient temperature range: -49F to 180F

.......more details

Instructions Manual Sell Sheet

15-50B18QGH

Sprocket 18 Teeth 1-1/4" Bore 1/4" Keyway

SEL2641R433-I

Erone 2-Relay Stand Alone Receiver 433MHz

Up to 85 transmitter keys
1 NO relay + 1 NO/NC relay (24VA)
Self-learning memorization
Standard pulse output relay
Power requirements: 12/24Vac/dc
Dimensions: 105 x 45 x 28mm (4.3 x 1.75 x 1.1in)

.......more details

Instruction Manual Sell Sheet Brochure Wireless System Chart

02-407

LiftMaster Key Switch Assembly On/Off Nema 4/12

Two-position keyswitch. Key removable in either position.
Surface Mount
May be used on all operators
Die-cast metal enclosure non-tamperproof

86LMC

LiftMaster Antenna Extension Kit

For use with 312HMC 412HMC 422LMC and 423LMC
Kit contains 15ft of cable

19-10929

LiftMaster Hoist Chain Sold by the Foot

and Chain for LiftMaster commercial hoist operators

41A5021-9G-315

LiftMaster Circuit Board Assembly

Board: Security+ 315 MHz
Aeesmbly includes: circuit board and end panel
Also includes 1 Multi-Function wall ctrl panel - 2 wire
For ATS2113X model
For older ATS operators use replacement board 41A5021-1ATS

ME112-E

Miller Edge Black 2W Non Monitored End Outlet 1-5/16" wide x 1-1/2" high Sold by the Foot

Slide in edge designed for commercial sectional doors and gates.
Retrofits easily to 1" to 1-1/4" sectional doors
Touch sensitive signaling allows for immediate stopping/reversing of motion
For sectional doors: measure the daylight opening of the door or measure the panel width of the door
This gives you the "active length" of the edge - the length to order
Lead wire: 22 gauge univversal

.......more details

Installation Manual Worksheet Sell Sheet

312HMC

LiftMaster Universal Coaxial Receiver Sec+ 315 MHz

External 8" coaxial antenna included
Security+ rolling code technology and/or Dip switch compatibility
12 VDC or 18-35 VAC/DC jumper selectable
Momentary or constant contact selectable
For replacement antenna use 41C3196
Accepts up to 31 remote control codes on Normal Security setting

.......more details

Programming Instructions Instructions de programmation

880LM

LiftMaster Smart Control Panel Sec+ 2.0 ***Discontinued replaced by 880LMW***

Menu-driven panel gives you complete control of the garage door opener; easily view inside garage temperature time and system diagnostics
Equipped with the Maintenance Alert System
On-board programming capability makes it easy to program remote controls and MyQ enabled accessories and adjust settings
Timer-to-Close automatically closes the garage door in 1 5 or 10 minutes; custom setting from 1-99 minutes
Displays Fahrenheit or Celsuis
Motion detector automatically turns on garage door lights when movement is sensed

.......more details

Installation Manual Manuel d'Installation

41A5483-4C

LiftMaster Circuit Board Assembly *** To Extent of Inventory

Assembly includes: circuit board end panel and light socket
For belt drive units
Fits 2280 2580 WD822K(s) WD922K WD912K(S)
Also known as 41A5483-4 41A5483-4B

41A6095

LiftMaster Electric Motor and Bracket for 3800 / 8500

For models: 3800 3800P & 3800PLD
Also known as 002D1622

23-2017

LiftMaster Limit Switch SPDT

24-24-6

Small Relay 24VAC 11-Pin 3 PDT

R-831-E

FL-Allstar 1-Door O/C/S Receiver 110554-311 MHz

Commercial Open/Stop/Close receiver for one door.
If your operator can be controlled by three button station then the R-831-E receiver and commercial remote controls will work with your operator.
It is easy to set with its learn feature (no coding switch).
This receiver can accept up to 8 different operational codes.
Manufacturer's model number: 190-110554
Dimensions: 6 1/4" x 3 5/8" x 1 3/4"

.......more details

Programming Instructions

19-48ML

Master Link #48

For #48 chain (#410)
Same as #65 chain

23-10041-1

LiftMaster Double Limit Switch Commercial DP DT

Double limit switch DP DT
For LiftMaster and Micanan operators

19-41ML

Master Link #41

For #41 chain
ANSI Standard Carbon Steel

17311

Doorlec AT1035D 1-btn Mini Transmitter 313 MHz ** To extent of inventory

One block of 10 dip-switches for programming
Compatible with Doorlec 17307 receiver (DC-3000R)
Includes 12V battery (GP23A)

PL-A03-OLD-BRD

Lynx Replacement Logic Board Old Version ** This item is no longer available (NLA) **

Old version board works on operators with a blue cover
Replacement logic board for Napoleon/Lynx Proline garage door opener
For openers built before 2008
This board has a transformer (the new board does not)

VBELT_4L340

Manaras VBelt 4L 34" - repl. by A32

Used on MTH/MTBH APE APT models
Same as Doorlec 19030

LIMIT025

Manaras Single Snap-Action Limit Switch with Flat Lever

Replacement for LIMIT001
For all Manaras commercial operators prior to 2000 - except light duty models
Can be used on Doorlec Lynx and others
Unimax (SPDT)

Limit Switch Chart

1003-1-5/8-8'

Aluminum Bottom Retainer L-Shaped

For 1-5/8" thick doors.

18-HWB-PAIR

Winding Bars Hex 18" Set of 2

Cold rolled hardened steel.
Hex shape keeps the bar from rolling away.
Machined to 7/16" at one end with a 1/2" outside dia. on the other end
Sold as a pair.

25-42-300

Extension Spring 7' Door - 300 lbs Tan w/ clip

Double - Loop
25" long 42" stretch 300 lb load
Sold individually
Rated for 10000 cycles

Spec Sheet

25-42-130

Extension Spring 7' Door - 130 lbs Yellow

Double - Loop
25" long 42" stretch 130 lb load
Sold individually
Rated for 10000 cycles

Spec Sheet

DM32-125

Cable Drum Standard Lift 32' 800-32 (1-1/4") Pair Torque Force

32 ft Standard lift aluminum die cast alloy cable drums for 1-1/4" shaft.
Pair includes (1) LH & (1) RH. Color coded: Red=LH and Black=RH.
3/8"-16 x 2" hardened cup point set screws installed with red heads.
Maximum Door Height: 32'-1".
Rated Lift per Drum: 1000 lbs.
Max Cable Diameter: 1/4".

.......more details

25-10100

Truck Door 1" Steel Roller 2.5" Shaft Length for Todco Roll-Up Doors

Zinc plated Hardened shaft and raceways
Seven roller ball design
Cross Reference: T #61174 T #69162 W #4026 W #4027 291000
Box quantity: 25

RP-3002

Rubber Plug 1/2"

To plug end of 3002 gum hose

HD3120

Commercial Inside Slide Lock for 2" or 3" track

Track use: 2" or 3"
Throw: 2-11/16"
Offset from inside face of door to lockbar: 1/2"
Bright zinc plated steel with spring actuated lock bar.
Same as part number 270

H12G01-SS

Hinge #1 x 12 gauge Stainless Steel

Manufactured with 12ga. Rust-Resistant Stainless Steel
Universal Design
Fits Most Overhead Sectional Doors
Priced Per Each

720118

FAAC Latching Plastic Enclosure

Dimensions: 4.65" x 8.38" x 0.6"

7549

Whiting Winding Cone for 2-5/8" ID Spring Wire Curbside (RH)

A Whiting original

111396.0002

Overhead Brake Kit Model RSX 3/4-1HP 3PH

RL44-40

Direct Burial Loop 6' x 16' Loop with 40' Lead-In

Used for installations under concrete asphalt pavers or in gravel roads.
The loop can be tied directly to the rebar before concrete is poured.
Wire is designed for a direct burial application.

3950-41DS

LiftMaster Dead-Shaft Sprocket Kit for 3950

Used on doors without live shafts
Same as 41A7280
Includes #41 chain sprocket

Sell sheet

31128

Doorlec Sprocket 41B12 Plain Bore 1"

Plain bore (no keyway)

EP2987

Exhaust Port 6" with latch long barrel ** Discontinued

6" inside diameter 2" sleeve with latch.
Includes fasteners & gaskets.

19045

Doorlec VBelt 4L360

41011

Doorlec Brake Release Cable

Used on GH

D4-18

Extruded Bumper Black 18" L x 4 1/2" W x 3 3/4" H w/Metal Insert

Reinforced prime rubber of Durometer 75 (±5) (ASTM D2240)
8.3 N/mm2 (±0.5) Tensile Strength (ASTM D792)
98% (±2) impact recovery
All extruded fenders are supplied with a metal washer insert

D4-12

Extruded Bumper Black 12" L x 4 1/2" W x 3 3/4" H w/Metal Insert

Reinforced prime rubber of Durometer 75 (±5) (ASTM D2240)
8.3 N/mm2 (±0.5) Tensile Strength (ASTM D792)
98% (±2) impact recovery
All extruded fenders are supplied with a metal washer insert

CAPACITOR037R

Manaras Capacitor 340-408uf 165VAC incl. Bleeder Resistor

Replacement for capacitor037 on MOTOR256

DC300-50-1

Dyna-Hoist 300 Series Direct Drive BBU 1/2 HP 110/240V 1" Shaft 40:1 Ratio ** Quote Only

Special-Order. Price by Quote Only
Automated battery backup - the unit continues to work on batteries with full functionality (but does move more slowly) until the unit gets to about 75% of battery capacity then transitions to push and hold operation.
The 300 series also works with and powers 12V automatic lock systems
Option available: 5-conductor cable (5') to reduce the risks of miswiring incidents available in 5' 10' 15' 20' or 25' lengths
Integrated software fuse that shuts down the unit to help prevent board component disasters should these be incorrectly installed on grossly imbalanced or improperly sized doors.
30:1 40:1 50:1 gearbox ratio are available. Please specify when ordering otherwise 40:1 will be supplied

.......more details

201-300-401-01-REFRUB

Refurbished 201-300-401-01 Unit

C12

Felco C9 Cable Cutter 3/8" Capacity

The FELCO C12 a two-hand wire and cable cutter designed for precision.
Made with unbreakable forged aluminum handles and high-quality hardened steel blades
The triangular cutting system allows for clean cuts without crushing the cable while the ergonomic design provides comfort and efficiency.
Length: 19.69 in
Weight: 3.75 lb
Cutting diameter: 0.47 in

.......more details

OSHW-6112-M-N4-R

Manaras Opera-SH w/Carwash Mod 1/2HP 120V 1Ph Mon ECB w/N4 Photoeyes Right Hand

An ultra high-end heavy-duty V-belt drive industrial jackshaft operator
For use on Standard High and Vertical Lift sectional doors
Can also be used on Rolling doors and Grilles
Comes with a chain hoist for manual operation and a floor level engaging device
Clearence: side room required 16"
Solenoid activated Brake

.......more details

461-0003-10

Richard-Wilcox #31 Square Track 10ft Length Sold per Piece

Used with #7-6095 rollers
Replacement for #75x14g

BEA-35-1566

BEA Power Cable RS-20US IS40

Replacement power cable only 35.1566
Replaces 35-1195
RS-20 US-Colored. Cable gland M16

2241GRB

LiftMaster Adjustable Guide Roller Bracket Sold Each

LiftMaster Guide Roller Adjustable Guide Roll Bracket (req. for dual system) (Corrosion Protected-Zinc)
Adjustable bracket provides ability to mount 2 Guide Rollers

K76-34697-3

LiftMaster APS Encoder with Harness 12V

For use with various LiftMaster® Commercial Gate Operator Models such as RSL12UL

BMT5011U

LiftMaster 1/2 HP 120 Volt Medium Duty Trolley Operator with Solenoid Brake

1/2 HP 120 volt 1 phase medium-duty logic trolley operator with brake
Medium-duty logic board with integral 315 MHz radio receiver
CPSU commercial photoeyes included
4L V-Belt #48 drive chain adjustable friction clutch
Use on standard lift sectional doors up to 14' high and up to 12 cycles per hour
2 year warranty

.......more details

112357.0003

Overhead Logic Board for RSX 208 460 3PH

IP-MDS

CDVI Point of Entry Exterior Multi-Tenant Surface Mount Video Intercom System

Intercom system designed for multi-tenant residential and commercial properties providing video entry via IP with a free to download smartphone app.
Ideal for outdoor use on apartment buildings (up to 500 tenants) or commercial properties.
Features a 170 degree fisheye camera 5" touchscreen menu and integral dual technology card reader.
IP54 (recommended to be put under a canopy or covering)
Operating temperature: -10C to 50C
Stainless steel panel

.......more details

MCB-DR-SH-ASSY

Lynx Clutch/Drive Shaft Assembly MCB 3/4" x 11-3/4"

For trolley operator

HAE00087

Linear Safety Beam Sender & Receiver with Wire

Set includes: Sender and Receiver photocells wire and connectors
Safety beams will work with all Linear operators that currently have safety beams installed.
Replaced HAE00002

GALV-331-258-L

Cut-to-Length Torsion Spring .331 x 2-5/8" Left Hand Wound Galvanized Red/White

Priced per inch - cones sold seperately
For factory installed cones use part no. C-258-INSTALLED
Galvanized

GALV-262-334-L

Cut-to-Length Torsion Spring .262 x 3-3/4" Left Hand Wound Galvanized Price per Inch

Priced per inch
For factory installed cones priced seperately - use part no. C-375-INSTALLED

LZR-MICROSCAN1T

BEA LZR Microscan Kit 1 Door with 2 Microscans Hub & Cables

Laser-based sensor system for automatic swing doors.
Time-of-flight technology used to eliminate the limitations of infrared-based devices.
Background independence eliminates nuisance detections caused by changing conditions while gyroscopes sense the movement of the door for accurate positioning.
Provides asjustable pattern depth.
Min/max door width: 20"-48" from leading edge of sensor LED
Mounting height: 75"-98" from finished floor to sensor LED

.......more details

GALV-406-6-R

Cut-to-Length Torsion Spring .406 x 6" Right Hand Wound Galvanized Blue/Yellow Price per Inch

Priced per inch - cones sold seperately
For factory installed cones use part no. C-600-INSTALLED
Galvanized

E14500D

Cable Tie KSPEC STD 50 LB Black 14" Nylon 500/pkg

Length: 15" Width: 5.0MM (0.187")
Low insertion and pull through force
Advanced pawl and teeth design
Angled tail provides quicker initial insertion alignment
Tail finger grips allow easier handling and tightening
Rounded edges provide added safety and eliminate insulation damage

.......more details

GHW-383-1HP-RH

Doorlec Industrial Gear Head Door Operator 1 HP 208V 3P with ECB and Nema4 modification

Extra heavy-duty industrial-type electric door operator for damp environments.
Worm gear reducer 40:1 ratio
#50 roller chain and sprockets from operator shaft to door shaft. (#60 chain optional)
Door speed: 7 inches per second (approx.)
Adjustable torque limiter (also called friction clutch)
Rotary type limit switches

.......more details

K177A0112

LiftMaster Trolley Spring

Also known as: 177A112 62274 177A0112 062274 132C2180 177A78

K41-0157-000

LiftMaster Cable Tension Monitor Right Side

For use with various LiftMaster® MAXUM Series DC 700 lbs. to 2200 lbs. Standard-Duty and Extended-Duty Jackshaft Jackshaft Hoist and Trolley Commercial Door Operators
This service kit is compatible with the following MAXUM models: JDC JHDC and TDC.
NOTE: Refer to K41-0156-000 for Left-Side Cable Tension Monitor

Q123

LiftMaster Electric Motor 12VDC K20-9012B-1

For use with various LiftMaster® Slide and Swing Gate Commercial Door Operators

BEA-35-1555

BEA 50' of Cable Only for LZR Widescan

Optional 50 ft cable for use with the LZR-WIDESCAN

2200-333

Linear Key 3/16 x 3/16 x 1-1/2

CAPXS

LiftMaster Smart Video Intercom - S

Designed with small multi-tenant buildings and single family gated homes in mind.
With the myQ Community app residents can see who is at the door before granting/denying access.
Integrated wide-angle camera: Lets you view entrance through a live feed or recorded event.
Integrated BLE radio enabling myQ Mobile Credentials: Ultra-secure encrypted access with the resident’s smartphone.
Cloud-based security: Keeps data protected and safeguards residents’ information. *All LiftMaster Smart Access Solutions (including CAPXLV CAPXLV2 CAPXM CAPXS CAP2D and CAPAC) require monthly subscriptions to a myQ Community plan.

BEA-10FALCN-EX100

BEA Falcon Motion Detector w/Exp Proof Housing 100ft Cable

FALCON EX combines a microwave activation sensor with an explosion-proof / flame-proof housing
Ideal for use in unique environments such as chemical manufacturing petroleum refining and agriculture.
FALCON EX can be mounted from 11.5' to 23' to fit any industrial application.
Nema4/IP66
Detection Zone: Falcon EX: 13’×16’ at 16’
Oerating termperature: -22-140F

.......more details

41832R.S

Genie Service Head 6070H/B 6170H/B

FOR REPLACEMENT OF JACKSHAFT OPERATOR SHAFT RELEASE OR MOTOR ASSEMBLIES
Head Service Kit for 6070H/6070HB and 6170H/6170HB
Special Order Price by Quote Only
This kit includes the complete motor but does not include the circuit boards transformer or cover for the 6070/6170 unit.

VME1-230-1

Pivin Drapeau Electric Motor 1HP 230V 1PH FR56C

OSH-6533-M-N1-LH

Manaras Opera-SH 3/4HP 600V 3Ph Monitored w/ N1 Eyes Left Hand

An ultra high-end heavy-duty V-belt drive industrial jackshaft operator
For use on Standard High and Vertical Lift sectional doors
Can also be used on Rolling doors and Grilles
Comes with a chain hoist for manual operation brake and a floor level engaging device
Clearence: side room required 16"

OSH-6113-M-N1-LH

Manaras Opera-SH 3/4HP 120V 1Ph Monitored Board w/N1 Eyes LH

An ultra high-end heavy-duty V-belt drive industrial jackshaft operator
For use on Standard High and Vertical Lift sectional doors
Can also be used on Rolling doors and Grilles
Comes with a chain hoist for manual operation and a floor level engaging device
Clearence: side room required 16"
25 cycles per day > 100 cycles per day

.......more details

Installation Manual Sell Sheet

K41-0246-000

LiftMaster Limit System Encoder IHSL24UL/INSL24UL

Compatible with the following models: IHSL24UL INSL24UL

P-535T

Pulsar 3-btn 27-Door O/C/S Transmitter 318 MHz

Allstar compatible
Wall mount
OPEN-CLOSE-STOP 27 doors
8 dipswitches 318 MHz

Programming instructions

EHJW-321-3/4

Doorlec Ind Jackshaft Op. Watertight ECB 3/4 HP 230V-1Ph

Heavy-Duty Industrial Operator with Waterproof Mod. for Sectional or Rolling Steel Doors
DC-2000 logic with adjustable Timer-To-Close Delay On Reverse and Traffic Light Control (monitored board optional)
Solenoid Brake prevents coasting and secures the door when closed
TEFC (sealed) continuous duty electric motor with overload protection
Automatic Friction Clutch protects the door and operator
Self-aligning Heavy Duty sealed Pillow Block bearings on all shafts for high cycle applications

.......more details

K94-34778

LiftMaster Board to Board Wire Harness 24V

For use with various LiftMaster® Swing and Slide Gate Operators and Perimeter Access Solutions

K41-0258-000

LiftMaster Idler Bracket Repl. Kit IHSL/ INSL24UL

Idler Bracket Replacement Kit. Compatible with LiftMaster® IHSL24UL & INSL24UL Series Industrial-Duty and Lite-Duty Commercial Slide Gate Operators

C-20X14-134-W-OLD

Thermal Window 20" x 14" for 1-3/4" Cedo Original White Old Style

For 1-3/4" thick door
Old style with round screw heads
Glass Dimensions: 17-3/4" x 12-11/32"
Hole Size: 18-3/4" x 13-3/8"
Exterior Frame: 19-3/4" x 14-3/8"

HCT16

LiftMaster HCT Rail Only 16'

Yellow zinc dichromate premium rail finish offers maximum rust protection in open-air environments.
Heavy-duty 12-gauge C channel corrosion resistant steel track.
This DOES NOT include the head unit
Will open a standard sectional door 15'6" high

OSH-6534-ECB-LH

Manaras Opera-SH 1 HP 600V 3 Ph with Electronic Circuit Board Left Hand

An ultra high-end heavy-duty V-belt drive industrial jackshaft operator
For use on Standard High and Vertical Lift sectional doors
Can also be used on Rolling doors and Grilles
Comes with a chain hoist for manual operation and a floor level engaging device
Clearence: side room required 16"
25 cycles per day > 100 cycles per day

.......more details

CT753L5

LiftMaster 3/4 HP 208/230/460V 3P Commercial Trolley Operator Logic 5 with Carwash Mod

Trolley low profile with brake
Suspended from the ceiling the operators are used on sectional overhead doors with standard lift.
T operators are directly attached to drive and control the door.
MyQ® Technology enables you to securely monitor and control your facility operator and lights with your smartphone tablet or computer for greater peace of mind.
Security+ 2.0™ safeguards your facility – with every click a new code is sent to the commercial door operator so the door opens only for you.
This operator comes with the carwash modification already installed

.......more details

MD-00146

Sprocket 410B18 3/8" Bore NO KW 2SS

NIR-50-325-KIT

EMX Retro Reflective Photoeye Kit UL325 NC/10K Across NO Contact EMX-5255-K

Kit includes photoeye with hood reflector with hood and mounting bracket
Retroreflective configuration
NC and 10K monitoring
50 ft. operating range
Sensitivity adjustment
Wide range operating voltage

.......more details

5415-2

EMX RAVEN Dual Relay Microwave Motion Sensor

Distinguish between vehicles and pedestrians
Two configurable relay outputs
Adjustable sensitivity and cross traffic suppression
8-23 ft (2.5-7 m) mounting height
Optional remote control for easy programming

HCT12

LiftMaster HCT Rail Only 12'

Yellow zinc dichromate premium rail finish offers maximum rust protection in open-air environments.
Heavy-duty 12-gauge C channel corrosion resistant steel track.
This DOES NOT include the head unit
Will open a standard sectional door 11'6" high

461-0004-12

Richard-Wilcox #31 Square Track 12ft Length Sold per Piece

Used with #7-6095 rollers
Replacement for #75x14g

CDJH-423-ECB-RH

Lynx CDJH Heavy-Duty Jackshaft 3/4 HP 208/220V 3 PH with ECB Right Hand UL325

3 Button station (NEMA 1)
1650 RPM high starting torque motor with overload protection
Inherent Mechanical Brake (I.M.B)
B2 Mode C2 Mode D1 Mode E2 Mode T Mode TS Mode
On board Open Close & Stop for ease of setting limits
Pre-wired to accept sensing devices

.......more details

8280.99

Whiting Aluminum U-Channel 99 IN Dry Freight

An original Whiting product
Use with Whiting seal # 5735

EHJ-321-1/2

Doorlec Industrial Jackshaft Op. 1/2 HP 230V-1Ph

Heavy-Duty Industrial Operator for Sectional or Rolling Steel Doors
DC-2000 logic with adjustable Timer To Close Delay On Reverse and Traffic Light Control
Solenoid Brake prevents coasting and secures the door when closed
TEFC (sealed) continuous-duty electric motor with overload protection
Automatic Friction Clutch protects the door and operator
Self-aligning Heavy Duty sealed Pillow Block bearings on all shafts for high cycle applications

.......more details

RADIO-EM104

Manaras 4-btn 4-door Rolling Code transmitter SBC or O/C Function 390 MHz

2 operating sequences available: open/close or single button control (SBC).
Single button control (SBC) allows the user the possibility to open stop or close the door by using the one button.
Comes with LED indicator CR2032 battery and visor clip.
Compatible with Manaras operators manufactured after August 2013 with control board070E & board070M.

Manual

EHJW-311-3/4

Doorlec Ind Jackshaft Op. Watertight ECB 3/4 HP 120V-1Ph

Heavy-Duty Industrial Operator with Waterproof Mod. for Sectional or Rolling Steel Doors
DC-2000 logic with adjustable Timer-To-Close Delay On Reverse and Traffic Light Control (monitored board optional)
Solenoid Brake prevents coasting and secures the door when closed
TEFC (sealed) continuous duty electric motor with overload protection
Automatic Friction Clutch protects the door and operator
Self-aligning Heavy Duty sealed Pillow Block bearings on all shafts for high cycle applications

.......more details

SSZP16-6

Solid Shaft 1" Keyed Zinc Plated 16'-6" (198")

BCH501L5R-BZ

LiftMaster 1/2 HP 115/230 VAC 1 PH Commercial Hoist Op L5 Carwash and Roller Bearing Mod. RH ***No Longer Available

H-style operators include a floor level chain hoist to ease manual operation in an emergency or power outage.
The operators are typically mounted to the wall when used with larger sectional overhead doors with vertical or high lift and mounted to the wall or the front of the hood when used with rolling doors and grilles.
H operators are attached to the door jackshaft to indirectly drive the door.
MyQ® Technology enables you to securely monitor and control your facility operator and lights with your smartphone tablet or computer for greater peace of mind.
Alerts can be received as email or pop-up (push) notifications on a mobile device ensuring the status of your commercial door.
Security+ 2.0™ safeguards your facility – with every click a new code is sent to the commercial door operator so the door opens only for you.

.......more details

813LMX

LiftMaster 3-btn Dip-Style Transmitter Sec+ 2.0

Encrypted DIP style three-button remote control with Security+2.0 technology
Ideal for applications such as gated communities or commercial applications requiring a large number of remotes for a common entrance
Easy to code 12-position DIP switch offers up to 4096 codes
May also be programmed for Open/Close/Stop functionality
Narrow band transmission on 3 simultaneous frequencies (310 315 390 MHz)
Compatible only with Security+ 2.0™ commercial receivers and operators

.......more details

Programming instructions Instructions de programmation Product Guide

65-52081-16

LiftMaster Dual Trolley Mod. #41 Chain for 16ft High Door Includes (2) 16' (Actual length 227") tracks and (1) Round Bar 240"

Provides drawbar-type operation on very wide (over 22 ft) standard lift sectional doors where a side-mount op. is preferred over a drawbar op.
Includes 16ft tracks Round Bar 1" x 20'
For H/J/GH