Devanco Canada

 
User Name:
Password:
Remember Me:
Forgot your password
Request a Login
Home
GALV-250-258-R

Cut-to-Length Torsion Spring .250 x 2-5/8" Right Hand Wound Galvanized Price per Inch

  • Priced per inch
  • For factory installed cones priced seperately - use part no. C-258-INSTALLED
GALV-250-334-R

Cut-to-Length Torsion Spring .250 x 3-3/4" Right Hand Wound Galvanized Price per Inch

  • Priced per inch
  • For factory installed cones priced seperately - use part no. C-334-INSTALLED
Q061

LiftMaster Cludge Arm Clamp and Handle K75-50121

  • Compatible with various LiftMaster® Swing Gate Perimeter Access Systems
K41-0381-000

LiftMaster Toroidal Transformer 700lb / 120VAC-240VAC

  • For Maxum ops
GX-200-MG

Garex Ready to Install Door Multi-Grooved Special Order

  • 21" panel = 4 grooves 24" panel= 5 grooves
  • COMPLETE JOINT SEAL No air circulation between the panel sections eliminating thermal bridges.
  • Minimize the heat transfer between the inside and outside of your garage.
  • LIGHTWEIGHT AND ROBUST PANEL Polyurethane foam insulation pressure injected between the interior/exterior faces
  • WOOD END BLOCKS Suitable to receive steel end caps
  • HIGH-PERFORMANCE DESIGN Flexible rubber inserted into a PVC reinforced moulding offering a tightly sealed fit to the floor
    • .......more details
OSH-6532-M-N1-LH

Manaras Opera-SH 1/2HP 600V 3Ph Monitored w/ N1 Eyes Left Hand

  • An ultra high-end heavy-duty V-belt drive industrial jackshaft operator
  • For use on Standard High and Vertical Lift sectional doors
  • Can also be used on Rolling doors and Grilles
  • Comes with a chain hoist for manual operation brake and a floor level engaging device
  • Clearence: side room required 16"
22019

Doorlec Push Button Contact Block N/O

PRO-GH-10023U-R

Micanan 1 HP 230V 3P Gearhead Op. N1 Eyes Monitored ECB Right Hand

  • Designed for use on all rolling doors and grilles and for large sectional doors with high or vertical lift.
  • Full function smart 10.0 logic board featuring on-board receiver with antenna and enhanced program selections.
  • External radio control terminal strip
  • Three button O/C/S control station Nema-1
  • Supplied with Nema-1 photocells
  • Emergency chain hoist with electrical cut-out switch for manual operation
    • .......more details
S3HD-2

Coaxial Splitter 2-Way Female to Female Type F

  • A practical and efficient solution for dividing a signal from a coaxial source into two separate channels
  • Its careful design helps minimize signal losses thus ensuring optimal quality on each output
  • Frequency: 5 - 3000 MHz
  • Special order item price may vary depending on availability.
15-50B72QGH

Sprocket 72 Teeth 1-1/4" Bore 1/4" Keyway

  • For use with various LiftMaster® Logic 4.0/5.0 and MAXUM DC Standard-Duty and Industrial-Duty Commercial Door Operators
GALV-250-258-144-R

Torsion Spring .250 x 2-5/8" x 12ft RH Galvanized Green

  • Wire size: .250
  • Inside diameter: 2-5/8"
  • Length: 12 ft
  • Galvanized Stenciled
41151R

Genie Light Kit Wall Mount

  • Bluetooth Light Assembly for the Genie #6070 & 6170 Wall Mount garage door opener.
  • Replacement light kit for 39945R
CGH755L5-LH

LiftMaster Gearhead with Brake and Carwash Mod 3/4HP 575V 3P L5 Left Hand

  • Gearhead style commercial door operators employ lubricated gears for heavy industrial high cycle applications.
  • GH-style operators include a floor level chain hoist to ease manual operation in an emergency or power outage.
  • Hoist wheel is easily moved to Right or Left hand side of unit eliminating the need to order right or left hand mounting.
  • MyQ Technology enables you to securely monitor and control your facility operator with your smartphone tablet or computer. Internet Gateway 828LM required.
  • Security +2.0 radio receiver safeguards your facility - with every click a new code is sent to the commercial door operator so the door opens only for you.
  • Timer-To-Close: Conveniently and confidently closes the commercial door automatically after a predetermined amount of time has elapsed for added security and peace of mind.
    • .......more details
29120

Doorlec Transformer 120V pr 28 V. sec. 50VA

  • 120V primary 28 V secondary 50VA
Q277

LiftMaster Wiring Harness Kit DC2000 K94-50262****no longer available

  • Compatible with LiftMaster® Models SL3000 and CSW200 Perimeter Access Systems
PRO-EHJ-7583U-RH

Micanan 3/4 HP 208V 3PH Cont. Duty Jackshaft N1 Eyes Monitored ECB Right Hand

  • Comm / Ind Continuous Duty Belt Drive with Emergency Chain Hoist
  • 24V class 2 control circuit with 40VA transformer to protect against short circuit
  • On board receiver with antenna
  • External radio control terminal strip
  • Low friction powder metal limit cam nuts with fully adjustable rotary type limit switch assembly •Three button open-close-stop control station Nema-1
  • Continuous duty industrial motor with overload protection
    • .......more details
Installation Manual Specification Sheet
40655R

Genie Garage Door Opener LED Bulb LEDB2-R 1/Pkg

  • LED: Long life low energy
  • Universal - works with all major brand garage door openers.
  • Eliminates or reduces remote interference.
  • Vibration and shatter-resistant up to 5Gs of shaking force.
  • Light appearance: 4000 K (neutral)
  • Brightness: 800 Lumens
    • .......more details
GALV-243-2-144-L

Torsion Spring .243 x 2" x 12ft LH Galvanized White/Yellow

  • Wire size: .243
  • Inside diameter: 2"
  • Length: 12 ft
  • Galvanized Stenciled
GALV-218-2-144-L

Torsion Spring .218 x 2" x 12ft LH Galvanized Yellow/Orange

  • Wire size: .218
  • Inside diameter: 2"
  • Length: 12 ft
  • Galvanized Stenciled
BEA-10FALCON-EX30

BEA Falcon Motion Detector w/Exp Proof Housing 30ft Cable

  • FALCON EX combines a microwave activation sensor with an explosion-proof/flame-proof housing
  • Ideal for use in unique environments such as chemical manufacturing petroleum refining and agriculture.
  • FALCON EX can be mounted from 11.5' to 23' to fit any industrial application.
  • Nema4/IP66
  • Detection Zone: Falcon EX: 13’×16’ at 16’
  • Operating temperature: -22 to 140F
    • .......more details
OPJ-6114-M-N1

Manaras Heavy-Duty Jackshaft Op 1 HP 120V 1PH Monitored ECB w/N1 Photoeyes

  • An industrial operator designed for use on standard high and vertical lift sectional doors
  • Can also be used on rolling doors and grills
  • It incorporates a floor level disconnect mechanism for manual operation
  • 25 cycles per hour 100 cycles per day
  • Continuous-duty single phase capacitor start or 3 phase motor open drip proof
  • Mechanical brake
    • .......more details
TS125

Wayne Dalton Thermospan 125 Steel Panel

  • Wayne Dalton’s Thermospan® Model 125 sectional door features a foamed-in-place polyurethane core
  • Standard joint seal that provides a substantially higher thermal efficiency than industry standard polystyrene insulated doors
  • The Wayne Dalton Thermospan® Series doors are the only sectional doors in the industry with patented roll-formed integral struts on each section making them the most rigid doors available
  • Thermospan® Model 125 is suitable for commercial and industrial applications.
BEARING007

Manaras Flange Bearing ID 1"

  • Flange bearing for 1" shaft
041-0180-000

LiftMaster Wiring Harness Camera/LED Pod Dual Lens

  • This replacement kit is compatible with the follwoing models: 84501 84602 85702 85702 87504 87802 B4603T B4603TC B6713T B6713TCH B6753T B6753TCH
PHOTO-060

Manaras Non-Monitored Photoelectric Cells N4/12 & IP67 Retro-Reflective 39' Range incl 3" Reflector

  • Retro-Reflective photo cell
050ACTWFLKMC

LiftMaster Receiver Logic Board AC WiFi Lock Capable

  • 315MHz Security+ 2.0 Lock Capable Receiver Logic Board Replacement Kit.
  • For use with various LiftMaster® and Chamberlain® WiFi® AC Chain Drive and Belt Drive Garage Door Openers; powered by myQ®.
  • This replacement part is for units featuring a yellow learn button; manufactured after 2017 only
D-2-5

Keyed Disconnect Device 5ft Cable

  • Operated from the outside to disconnect the trolley for manual operation of the door
  • Must specify if keyed alike is required or keyed random will be shipped
  • Mounting plate dimensions: 2 1/2” x 1 3/32”
LJH-383-1/2-RH

Doorlec 1/2 HP 208V 3PH Jackshaft Operator Right Hand

  • Heavy duty industrial type control station open close stop 24V. control circuit
  • Universal mounting right or left
  • Floor level disconnect device electrical and mechanical
  • Emergency chain hoist operation on LJH model only
  • Colour code wiring diagrams
  • Rotary type limit switches readily adjustable in both directions
    • .......more details
Technical information
2000D

Chain Hoist Direct Drive Assembly 2000 D

  • Sectional door Direct drive - 1" shaft
  • Requires keyed shaft
  • Includes: 2 shaft collars Chain Keeper 1/4" Square Key 2x set screws 5/16-18
  • Fits 5-1/4" min. offset
  • Includes 26' of chain
  • Ratio: 1:1
    • .......more details
OSH-6113-M-N1-RH

Manaras Opera-SH 3/4HP 120V 1Ph Monitored Board w/N1 Eyes RH

  • An ultra high-end heavy-duty V-belt drive industrial jackshaft operator
  • For use on Standard High and Vertical Lift sectional doors
  • Can also be used on Rolling doors and Grilles
  • Comes with a chain hoist for manual operation and a floor level engaging device
  • Clearence: side room required 16"
  • 25 cycles per day > 100 cycles per day
    • .......more details
Installation ManualSell Sheet
15-50B12QGH-1

Sprocket 50B12QGH

  • Also known as: 1550B12QGH 15-50B12QGH 15-50B12QGH-1
P-639T

Pulsar 3-btn 9-Door O/C/S Transmitter 318 MHz

  • Allstar compatible
  • Wall mount
  • OPEN-CLOSE-STOP 9 doors
  • 8 dipswitches 318 MHz
Programming instructions
P-733T

Pulsar 3-btn 3-Door O/C/S Transmitter 318 MHz

  • Allstar compatible
  • Wall mount
  • OPEN-CLOSE-STOP 3 doors
  • 8 dipswitches 318 MHz
Programming instructions
16-2101

LiftMaster Vbelt 3L 25" 3L250 *** NLA

  • This is a replacement Belt (3L250).
  • Compatible with LiftMaster® Model SW470GL Swing Operators
  • Also know as: K16-2101 G162101 162101
041-0365-000

LiftMaster Sensor Eyes and Brackets 1997-Current

  • For use with various LiftMaster® and Chamberlain® Belt Drive and Chain Drive Garage Door Openers; manufactured after 1997.
  • Complete kit includes: (1) Sending sensor eye (with LED) (1) receiving sensor eye (with LED) (2) replacement brackets and replacement hardware.
  • Also known as or Replaces: 041A5266-1 041A5266-3 41A5266-3 41A5266-1 12D584-1
7-6087

RW Hanger 021 Hinge Apron Formed Steel 4-3/4" l. x 1-7/8" w

  • Capacity: 125 lbs
  • Material: Formed Steel
  • Finish: Wheels satin coat steel Apron and pendant commercial galvanized
  • Wheels: 2 1/8" Diameter Formed Steel
  • Bearings: Cold Rolled Steel Rollers
CA-107-412

Continuous Angle 1-1/2" x 4-1/2" x 107" L Sold per Piece

02-411

LiftMaster Pull Switch Assembly Nema 4

  • May be used in two different ways: as an OPEN only control (all LiftMaster operators) or as an OPEN/CLOSE control (only LiftMaster operators with types B2 and S2 control wiring).
  • In the latter case pulling the cord will open a fully closed door close a fully opened door and reverse a closing door.
  • Pulling the cord whlie the door is opening will either have no effect (type B2 wiring) or will stop the door (Solid State Logic Control Board).
O02R9211

AirLift Metering Screw

02-515

LiftMaster Panic Release Device

DC500-100

Dyna-Hoist DC Series Direct Drive Opener 1/2 HP 110/240V 1ph ** Price by Quote Only

  • The direct drive operator consists of a DC electric motor directly coupled to a hollow shaft (30:1 reduction) worm gear reducer designed to install over keyed door shaft.
  • Continuous duty 0.5 HP 90 V DC 1750 rpm motor suitable for 110 to 240 V 1 PH and 60 Hz power supply.
  • Comes with integral absolute encoder to control the door travel
  • 24 V 5 amps back-up battery pack and 3/8” ratchet socket to accept and crank for manually operating the door in case of power failure
  • Programmable wall mountable UL325 compliant NEMA 4X control panel with LCD display and OPEN-CLOSE-STOP buttons on cover
  • Nema 4 photocell
    • .......more details
Pulse Series Installation ManualsDC Series Brochure
CAPXM

LiftMaster Smart Video Intercom

  • LiftMaster’s cloud-based video intercom for multi-tenant residential properties.
  • The intercom allows residents to see their visitors through live video and grants access to the building via the MyQ app
  • Display and interface – 7” color display with touchscreen
  • Connectivity – WiFi cellular wired high-speed DSL
  • Audio capabilities – Voice over IP – digital call quality with no long-distance charges
  • Video capabilities – One-way video calling with a 135-degree view
    • .......more details
LRS-C1

EMX Vehicle Detector Control Unit for Single Sensor 2303-2

  • The Loop Replacement System (LRS) features advanced 3-axis magnetoresistive sensing technology that responds to changes in the Earth’s magnetic field caused by ferrous objects.
  • Three sensing elements provide measurements in the X Y and Z axes to improve detection sensitivity when used in either above or below ground installations.
  • The LRS is equipped with our new DETECT-ON-STOP™ or (DOS®) feature which allows detection only when a vehicle has come to a complete stop.
  • Backwards compatible with CS303 sensors
7500-FS-GALV

Fire Shutter Hot-Dipped Galv Interlocking Slats Made-to-Order

  • Shutters can be up to 13'- 6 inches wide and 12 feet tall with UL labels Class A B or C while still being able to function as normal counter rolling shutters.
  • Oversized fire shutters can be manufactured up to 20 feet wide
  • Model 7500 fire shutters can be installed with either a manual lift external motors a hand crank with or without automatic testing tubular models with the option of automatic testing
  • Along with UL labels that will automatically close the fire shutters for either 3 1½ or ¾ hours the fire shutters can also be manufactured with smoke protection
  • Available finishes: Hot-dipped galvanized steel with an optional baked-on gray polyester enamel coating or 304 stainless steel with a number 4 finish flat profile
  • The viscous speed governor can be set to automatically close the fire shutters at speeds of 6 inches per second up to 24 inches per second complying with NFPA 80 specifications.
    • .......more details
K75-37700

LiftMaster Chain Guard and Idler Sprockets SL595U

  • Complete kit includes: (1) Chain Guard (2) Idler Sprockets.
  • This replacement kit is compatible with the following models: SL595U SL595UL
33103

Overload 1.40 to 2.30A

  • Setting range 1.8-2.5A
KCIEN-SBP

DigiCode Illuminated Keypad with Controller Built-in

  • Illuminated stainless steel keypad
  • 100 user codes (4 to 6 digits)
  • 2 form C outputs (6A/250V) timed (1 to 99 sec.) or latched
  • Audible feedback buttons
  • Request-to-exit input
  • Potted electronics
    • .......more details
HAE00070

Linear LDCO Control Board (841/850/852/863B)

041-0041

LiftMaster Camera with Decorative Cover

  • Fits model 87504
SP-LMHNTG

LiftMaster Rearview Parking Access Hang Tag 25/pkg Special Coded **Must provide FC & Start #

  • Rearview mirror hanger gives access to gated facilities complexes for cars trucks and other vehicles
  • Can be used for larger vehicles with higher cabs as vans various trucks
  • 20-25 foot detection zone
  • Device is engineered for use with the LIftMaster LMSC1000 Long Range Vehicle Access-Card Reader
  • Simple transferrable item can be swapped out for rental cars different vans/trucks in a fleet dealer/loaner repair cars and more
  • Tags are sold in batches of 25. Your location may have a facility code. Check with your maintenance department or administrator if needed
    • .......more details
BEA-10-PSMDR2024

BEA Power Supply 100 - 240 VAC 24 VDC Output

ETBH-311-1/2HP

Doorlec 1/2HP 115V Trolley Door Opener with solenoid brake

  • Trolley model heavy-duty door operator designed to provide smooth dependable operation of sectional overhead type doors.
OWL-RC

EMX Infrared Programming Remote for OWL

  • OWL-RC is required for programming the OWL Motion Sensor
Quick Start Guide
MO00006

Micanan Gearhead Disconnect Spring

  • Dimensions: 0.92ID x 0.09G x 2.00"L
MAW123-YEL-RH

Miller Edge Air-Wave Edge Yellow Sold per Foot

  • This pressure sensitive air-wave edge can be adapted to suit a wide variety of applications.
  • When touch activated the MAW123 sends an immediate pulse of air through the extrusion to an air-wave switch which sends a signal to controls to stop and/or reverse operations.
  • It has been designed to fit most doors with double track bottom retainers.
  • With appropriate mounting channel this edge will fit nearly all doors from 11/2" to 2" thick.
  • The MAW123 is resistant to flame water and most common greases and oils.
ME123-2M-BLK-RH

Miller Edge Black RH 2-Wire Monitored 2" wide x 1-1/2" high Sold by the Foot

  • Electromechanical slide in edge for sectional doors and sliding gates.
  • Touch sensitive singaling allows for immediate stopping and reversing of motion
  • Temperature range: -30F to 155F
  • Lead wire: 22 gauge universal
  • Sensitivity: nominal 6-8 PSI
  • 2 wire NO configuration
    • .......more details
WorksheetInstallation manualSell sheet
4580-304-BRONZE

Adseal DWS Weatherseal Silicone Adhesive Sealant 304ML Bronze (Commercial Brown) 458-47 *** To Extent of Inventory

  • 304ml cartridge
  • Ideal for movement and perimeters joints
  • Meets ASTM C920 S NS Class 50 NT M GA O
  • Meets AAMA 802 and 805 standards
  • Can be used on aluminum glass masonry some plastics painted and unpainted metals & does not yellow
  • Excellent resistance to UVs for indoor and outdoor use
    • .......more details
236515

Wayne Dalton Res. Bottom Bracket Roller Holder LH

  • Compatible with Wayne Dalton 9100 9400 9600 9800 Foamcore II garage door models.
  • Pins & Cotters Included
  • Top quality galvanized steel
  • Dimensions: 4" Wide x 1.25" High x 1" side flange with milford pin
  • Sold as a single unit
K16-GT2-7

LiftMaster Timing Belt

  • 3M belt
  • Durable construction
  • Resists damage from friction and pollutants
  • Even stress distribution for heavy-duty operators
  • For use with LiftMaster CSL24UL CSL24V CSL24VDC
  • DIMENSIONS: 7.5 in OD x 7.25 in ID
    • .......more details
ALUM-322

Aluminum 24" x 100' Spool Red # 322

  • 20% thicker than the aluminum sold in retail stores (0.022" )
  • Gentek # 322
  • Reverse side is #431 Bright White
Colour chart
MEL-II-TX10

Miller Edge Monitored Edge Link-II Transmitter

  • Miller Edge Monitored Edge Link II TRANSMITTER ONLY
  • Monitors the presence and function of any 10K (T2) monitored sensing edge
  • Provides a monitored wireless signal transmission from the sensor to the operator controls
  • Improved immunity to RF interference with 916 MHz operating frequency
  • Eliminates visible coil cords and retracting reels
  • Saves installation time
    • .......more details
WB-350

Skylink Multi-Function Wall Console New ATR Model Ops

  • For use with the Skylink ATOMS AT series garage door openers.
  • Oversized Push Button for activating the garage door opener.
  • Activate opener light on/off and the light will remain on until the button is pressed again.
  • Feature with Lock function to ignore all radio signals for added security.
  • Illuminated LED indication.
  • Easy to Install.
    • .......more details
MOD114A

Manaras Synthetic Oil Upgrade Only

  • This Upgrade Mod. is only available when purchaed with a compatible operator
  • Synthetic oil is placed in the operator's reducer for improved performance stability and decreased sensitivity to temperature variances
22253

Doorlec Flush Mount Key Switch O/C Tamperproof

  • Flush mount momentary-contact spring return key switch OPEN/CLOSE in TAMPER PROOF EEMAC 1 enclosure with gasketed aluminium cover.
  • Key removable at centre only.
  • Can open or close door.
  • Recommended applications: laboratories schools hospitals food processing plants or any other area where sanitary and high security condition are important.
SL595103UL

LiftMaster Dual Voltage Slide Gate Op.1 HP 208/230/460V 3 Phase - Heater NOT Incl. UL325

  • UL 325 compliant system.
  • Power: 208/230/460/575 VAC. 3 Phase.
  • Accessory power: 24VAC 500mA max.
  • Monitored safety inputs: 3 Main Board 3 Expansion Board.
  • Temperature specs: Without Heater: -4°F (-20°C) to 140°F (60°C). With optional heater (HTRNB: HTR460 for 460V operators): -40°F (-40°C) to 140°F (60°C)
  • Gate travel speed: 12 in. per second.
    • .......more details
K76-36296-1

LiftMaster Recepticle LA500

  • Only compatible with LiftMaster LA500 with standard control box
02-403N4-XALD

Push Button Control Station 3-Button Surface Mount NEMA 4/12 O/C/S Black Black Red

  • Open/Close/Stop allows complete control of the door.
  • Compatible with all commercial door operators.
  • NEMA 4 4X 12 13
  • Outdoor surface mount station with polycarbonate enclosure Part # XALD03H7
  • Dimensions: 2.0" x 5.27" x 2.68" (H x L x W)
108207

Fasteners Self Drill & Tap Tek Screw 5/16-12 x 1" 100/Bag

  • Indented Hex Washer Head
  • 7/16" Head
  • Max RPM = 2000
OVIEW-IBT4

NICE Handheld Oview Display Programmer with IBT4 Interface Module OVIEW/A

  • Required for programming barrier gates
WD-24X6-112-W

Thermal Window 24" x 6" for 1-1/2" Door White

  • For 1-1/2" thick door
CP-LX-KEYPAD

Lynx Wireless Commercial Op. Keyless Entry 372MHz

  • Illuminated Keypad
  • Weather shutter protects keypad from elements
  • Wireless Installation
  • 4 digit codes for maximum security
  • Allows for access without remote or keys
  • For use with any UL325 commercial operator that has an LX100 or LX900 board
    • .......more details
Programming instructions
12-4164

Flange Mount Bearing Self-Aligning

  • Works with SL575 SL580 SL585 SW470.SW470 gate operator
  • Same as K12-4164 124164
CP-MO-34-123/1

Lynx Electric Motor 3/4 HP 115/230V 1 Ph

  • Electric motor only
PL-A21-RPM-WHEEL

Lynx RPM Reader Wheel

2996

Truck Door 2" Steel Roller 3" Stem Enclosed Bearings for Whiting Roll-Up Doors

  • A Whiting original
41A6689

LiftMaster Trolley Threaded Shaft D-Shape

  • For use with various LiftMaster® Belt Drive Garage Door Openers that utilize a T-rail.
ULTRA-DIN

EMX Industries DIN Rail Mount Vehicle Loop Detector

  • Ignores cross traffic in tight spaces with DETECT-ON-STOP™ feature
  • Easy to install and setup with the ULTRAMETER™ sensitivity display
  • Low current draw – green product
  • Easy identification of interference problems using the crosstalk and RFI interference display
  • Fits into small operator housings saving space size: 80 x 23 x 84 mm
  • 10 sensitivity settings
    • .......more details
RADIO-RE901

Manaras 1-Channel 24V Dip-Switch (313MHz) & Rolling Code (390MHz) Receiver

  • For Commercial/Industrial Garage Door Applications
  • Wall Mount
  • DIP Switch and Rolling Code Technology
  • Sixteen (16) Fixed Codes / Receiver
  • 313 MHz Radio Frequency
  • Controls One (1) Door
    • .......more details
Programming instructionsManualSell sheetManual
E/1929/071

Automatic Systems Round Arm Ass'y 16'-5" (BL229)

  • Used on the BL229 gate op.
3EBX

Explosion Proof 3-Btn Pushbutton Control Station

  • Not rated for division or class
  • Three button O/C/S Nema-7/9
  • Surface mount
  • Dimensions: H=6-1/8" x W=3" x D=4-3/8"
CAMPLATE001

Manaras Cam Plate GH Standard

AW-10

Miller Edge Air Wave Switch Only No Enclosure

  • Air pressure is lead via a hose or pipe to a diaphragm contact. This contact converts the positive or negative pressure into an electrical contact and pulse.
  • Applications: commercial sectional doors rolling doors and mass transit
  • Works on doors up to 60ft
  • Can be used with standard pneumatic hose and Miller Edge extrusion
  • Sensitivity: 2mm to 500mm
  • Ambient temperature range: -49F to 180F
    • .......more details
Instruction manualSell sheet
T-831

FL-Allstar Stationary TransmitterO/C/S 3-Btn 1-Door 311 MHz 107483

  • Open/Close/Stop stationary remote for 1 door.
  • Designed for commercial automatic door and gate operator applications.
  • This transmitter can operate a single receiver connected to one operator
  • Compatible with 3-channel Allstar and MVP receivers
  • Easy access to battery and coding switch
  • Power: 9-volt battery
    • .......more details
MGH-6435-ECB-RH

Manaras 1.5 HP 480V 3P Jackshaft with Elect. Circuit Board Right Hand

  • A very heavy-duty worm gear industrial operator designed for use on Industrial standard high and vertical lift sectional or rolling doors and grilles.
  • It incorporates a chain hoist for manual operation with a floor level engaging device with electrical cut-out
  • Electrically activated drum-band type solenoid brake
  • Full overload protection
.192-2-R

Cut-to-Length Torsion Spring .192 x 2" Right Hand Wound Silver

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-200-INSTALLED
30005

Doorlec Brake Solenoid 208V with wire leads

GATE-SP-ORDER

Special Order Gate

  • Made to customers specific requirements
MH00027

Micanan Collar 1/2" ID

K1A6408

LiftMaster APE Kit 24V

  • For use with various LiftMaster® Swing Gate and Slide Gate Operators
K76-34697

LiftMaster APS Encoder 24V

  • For use with various LiftMaster® Commercial Slide and Overhead Gate Operators
PRO-SD-10011-U-RH

Micanan 1 HP 115V 1P Horizontal Sliding Door Op. Monitored ECB N1 Eyes Right Hand

  • Designed for use on commercial / industrial sliding doors or sliding fire doors
  • External radio control terminal strip
  • 3-btn O/C/S control station Nema 1
  • #41 roller chain & sprockets on all internal drives
  • Heavy duty 5L v-belt
  • Solenoid brake standard
    • .......more details
MP-00072

Micanan Jackshaft with Auxiliary Trolley Assembly 14' High Door #41 Drive Chain

  • Provides an auxiliary trolley assembly where otherwise a jackshaft operator may be preferred
  • Operator must be supplied with reversed limits
  • For models: PRO-J H HHD GH GHC
PPV3M

LiftMaster Passport MAX 3-Button Visor Remote

  • Provides total control with one remote for gated communities and commercial properties.
  • Compatible with the PPWR Receiver for gate access control all 315MHz Security+ LiftMaster and Elite Series Gate Openers and all LiftMaster Garage Door Openers manufactured since January 1995
  • 2x the range of standard remote controls
  • Narrow-band transmission on 3 simultaneous frequencies (310 MHz 315 MHz 390 MHz)
K74-30763

LiftMaster Plug-In Transformer 120VAC ****Discontinued Use APOW3

  • 120VAC 50-60Hz 36VDC 1.1A Output
  • Used on the LA400
  • Discontinued in 2018 use APOW3 instead
SSSS-1-6FT

Solid Shaft 1" Keyed Stainless Steel 6 ft

  • 303 series Stainless Steel
210134

Skylink Pulley Assembly - Belt

  • Fits Skylink & Mastercraft 046-0266-0 belt model openers
GH-6533-0000-CBOX

Manaras Control Box for GH 600V

  • Control box only
.393-334-R-C

Cut-to-Length Torsion Spring .393 x 3-3/4" Right Hand Wound Coated ** Price by Quote Only

  • Priced per inch - cones & filler sold seperately
  • For factory installed cones use part no. C-375-INSTALLED
PRO-HHD-10083U-L

Micanan 1 HP 208V 3P Heavy-Duty Jackshaft N1 Eyes Monitored ECB Left Hand

  • 1 HP208V 3 PH Industrial Continuous Duty Jackshaft Operator Ideal for Sectional Doors Rolling Steel
  • Monitored logic board with integral 372Mhz radio receiver that can hold up to 20 transmitters (MK-00647/ MK-00653/ MK-00659) or 200 of the 1 channel hand held transmitters (MK-00660).
  • N-1 Through-beam (MK-00649) photocells included. Other options available.
  • 3-btn o/s/c (02-103) wall control station included
  • Adjustable Friction Clutch 5L320 drive belt
  • #50 Roller chain 18 tooth door sprocket included
    • .......more details
Installation ManualSpecification Sheet
821LMB

LiftMaster MyQ Garage Universal Smartphone Garage Door Controller Second Generation *** To extent of Inventory. Repl 821LMC-S

  • Enables smartphone control of most major brands of garage door opener with photoeyes.
  • Includes Wi-Fi hub and door sensor
Sell sheetBrochure