Devanco Canada - Get The Right Garage Door Opener‎ and Parts

JHDC12X1BMC

LiftMaster MAXUM Jackshaft 3/4HP 120/240V 1PH DC Operator 60 Cycles/Hour 1200LB

DC high-efficiency motor and gearbox provides the power needed and smooth start and stop to reduce wear-and-tear on your door and operator
Average of 12” per second opening on sectional doors and 8-9” per second on rolling steel doors
Provides seamless operation by supplying standby power when the power is down (battery backup kit sold separately)
Listed to ANSI/CAN/UL325 Standard for USA/Canada
Drive Type 65:1 Gearbox with #50 Chain Output
Radio Receiver DC Logic 1.0 board with Security+ 2.0® rolling code technology remote controls and binary DIP switch remote controls

JHDC_Installation-manual JHDC_Manuel-installation Data sheet Fiche technique Quick connect guide Guide de connexion rapide Ordering guide Sprocket recommendation

SEF2420

Erone Adjustable Infrared Photocell 20M (65ft)

Adjustable lens 180° right to left and 40° Top-Bottom
Range 20M (66ft) in all conditions
Adjustable Sensitivity
Power supply 12/24 Vac/dc
Operating temperature -20/+55 °C
Dimension: 90 x 60 x 60mm (3.5 x 2.4 x 2.4 inches)

.......more details

Wireless System Chart

FAAC-844-115V

FAAC 844 Slide Gate Operator 115V

The FAAC Model 844 automated system for sliding gates is an electro-mechanical operator transmitting motion to the sliding leaf via a rack or chain pinion appropriately coupled to the gate
The non-reversing system ensures the gate is mechanically locked when the motor is not operating and therefore no lock needs to be installed
Control Board: model 780D

K32-11010

LiftMaster Gear Reducer 44:1 1-1/2-2 HP

Replacement Kit. Compatible with 1HP 1/2HP & 2HP LiftMaster® GH Model Commercial Door Operators
Also known as: 32-11010 3211010

CP-LX900

Lynx Control Board with Cover for MDJ models

works only on MDJ (medium -Duty Jackshaft) models
UL325 compliant with B2 C2 modes
includes on-board Timer-To-Close
On-Board 372MHz radio receiver accepts 20 remotes

MDJ Installation manual

CHI-FS-7522

CHI Fire Shutter 7522 ** pricing by quote only

Door meets 45-minute 90-minute and 3-hour UL ratings with full compliance to NFPA-80 standards.
Standard curtain provides a 1 ½” pre-painted hot dipped galvanized steel slats.
Smooth quiet drop testing thanks to a durable viscous governor.
Simple drop-testing and ability to reset the door which makes for quick operational readiness.
Standard bottom bar slide bolt locks with an optional cylinder lock.
Slat Thickness: 22 gauge Flat slats

.......more details

91567

Marantec Sprocket Holder Assbly Standard Belt Rail

Compatible with Belt Standard Rail
For Marantec belt opener models: Synergy 260 Synergy 270 Synergy 280 Synergy 360 Synergy 370 Synergy 380 Synergy Solo M50 M55
Not for use on the heavy duty 1.2mm - 18 gauge rails
Measures 5"x2-3/4"x1-1/4"

RLC-K72

Miller Edge Light Curtain Non- Monitored 6ft

Light curtain made up of a series of thru-beam photo eyes designed to provide a dense barrier of protection for motorized or high speed doors.
Ideal for environments that require expanded protection for protruding parts that may not be detected by standard single-beam photo eyes mounted 6" above the floor.
Ideal for pre-2010 installations not requiring a monitored solution.
Ability to span up to 32' wide
Universal mounting brackets included
IP67 waterproof housing

.......more details

Installation manual sell sheet

10MS41-S

BEA Magic Switch Touchless Stainless Steel Single Gang***NLA Replaced by 10MS31U-B

BEA’s MAGIC SWITCH® Family provides a highly accessible and germ-free door activation without physical contact.
Reduce touchpoints in fast-paced environments that depend on sanitation like healthcare retail industrial and commercial settings.
Using microwave technology BEA’s MS41 produces a detection field with a reliable and consistent transmission in interior and exterior applications.
Capable of detecting a moving hand cart or wheelchair.
Plus an adjustable hold time offers flexibility to meet ANSI standards.
The durable design suits sterile wash-down applications such as surgical wash-down clean room and pharmaceutical environments.

.......more details

RENO-B4

RENO 11-Pin Amphenol Style Connector 12-24V Single Channel Loop Detector *** To Extent of Inventory

The Model B is a full featured single channel dual output vehicle detector that incorporates the reliable vehicle detection technology found in all of Reno A & E s vehicle detectors.
All detector functions and settings are configured by using a set of eight internal DIP switches and a front panel mounted pushbutton switch
Dimensions: 11-Pin Models - 3.00 inches (7.62 cm) high x 1.75 inches (4.45 cm) wide x 4.30 inches (10.92 cm) deep

Installation manual Spec sheet

ERN

Erone 4-Channel Transmitter 433MHz

Innovantive and extreme crashworthiness
Casing: aluminum and black polycarbonate
Range (line of sight): up to 250 m (820 ft).
Dimensions: 70 mm x 40 mm x 10 mm (2.75 in. x 1.57 in. x 0.4 in.)
Comes with: One lithium battery (2032)
Optional 26-bit Wiegand proximity tag built-in: ERN (old #S7TR2641E4T (HID) old # S7TR2641E4M (Mifare)

.......more details

Wireless System Chart

CHAIN059

Manaras #41 chain 48 Pitch (24" long)

Includes 1 chain link

111503.0002.S

Overhead Gear Reducer 40:1 RHX

D-67

Linear 1-Channel Digital Receiver 303 MHz

Designed for use in security systems and remote switching functions.
Typical applications for the receiver include adding a wireless zone a panic button or creating a remote arm/disarm feature for a hardwired alarm panel
Operates on 11-24 VDC or 12-16 VAC power
One channel
Standard digital format: 256 discrete codes
One form “C” relay output

.......more details

950-193

Richards-Wilcox 3" Single Btm Roller Carrier w/ Roller Carrier Tube for Short Stem Roller

Original RW part

830

Fasteners Wood Screw #8 x 3" Flat Head Course Thread Zinc Plated 1000/Box

Drive style: Robertson / Square head
Plain thread

ME123-2M-BLK-LH

Miller Edge Black LH 2-Wire Monitored 2" wide x 1-1/2" high Sold by the Foot

Electromechanical slide in edge for sectional doors and sliding gates.
Touch sensitive singaling allows for immediate stopping and reversing of motion
Temperature range: -30F to 155F
Lead wire: 22 gauge universal
Sensitivity: nominal 6-8 PSI
2 wire NO configuration

.......more details

Worksheet Installation manual Sell sheet

MTR3

Linear 3-Channel Visor Transmitter 318MHz ** To extent of Inventory

Activates three MegaCode receivers
Test/operate LED
Visor mounting clip supplied
Visor clip mounts vertical or horizontal
Power: One 2032 battery
Codes: 1000000+ (MegaCode format)

.......more details

Programming instructions Instructions de programmation

RADIO-RE901A

Manaras 1-Channel 24V Dip-Switch (313MHz) & Rolling Code (390MHz) Receiver with Commercial Antenna

For Commercial/Industrial Garage Door Applications
Wall Mount
DIP Switch and Rolling Code Technology
Sixteen (16) Fixed Codes / Receiver
313 MHz & 390MHz Radio Frequency
Controls One (1) Door

.......more details

Programming instructions

SELECTOR-BTN-8L5

Devanco replacement rotating black button for 8L5-OCS

replacement black button but for rotating 8 position selector for 8L5-OCS

FLO1

NICE 1-btn Dip Switch Remote 433.92 MHz

Nice 1 Button 433.92MHz radio-control with programmable code - 1024 combinations.
Contains 10 DIP switches inside for coding.
Battery included: 12V (GP23A)
Dimensions: 72 x 15 x 40 mm

MW00024

Chain Tensioner for 1"-1" Shafts Inside the Box

Chain spreader for installation with 1" operator shaft & 1" door shaft.
Includes 2 shaft collars and set screws.

229557

Torque Force EZ Low Headroom Conversion Kit

Reduced headroom as low as 8"
Convert a standard lift door to a low headroom door without using an outside hookup configuration.
Easy to install 3 piece kit
Fits on 15" radius and 12" tracks

K71-D1PH

LiftMaster Drum Brake Kit 1 Ph 115/230V (Late Model Logic 5 Shoe and Drum Models)

Internal Solenoid Drum Brake with Cable (120V Single Phase) Replacement Kit.
Compatible with LiftMaster® Logic 5.0 Model T SD J H and HJ Industrial-Duty Operators.
Complete service kit includes: Solenoid Cover Brake Solenoid Brake Drum Cable Mounting Plate and Installation Hardware.
Quiet preferred sound profile
Industry benchmark stopping performance with adjustability
Significantly reduced modes of failure

.......more details

Installation manual Manuel d'installation

MK-00175

Micanan Transformer 200V-110V-100VA

MV-00237

Micanan Key Switch O/C/S Btn Tamper Proof w/Best Core Cylinder Nema 4 Surface Mount

LB1012-12

Laminated Bumper Standard Black 12" x 12" 10" Projection Horizontal Installation

For use in low to medium traffic loading docks in factories and warehouses.
Can be used as rub rails at the sides of truck wells
Fabric reinforced rubber pads cut from recycled truck tires.
Rubber pads laminated between steel angles and secured with 3/4” rods
Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
Wall mounting hole size is 7/8” diameter.

.......more details

LB612-14

Laminated Bumper Standard Black 12" x 14" 6" Projection Horizontal Installation

For use in low to medium traffic loading docks in factories and warehouses.
Can be used as rub rails at the sides of truck wells
Fabric reinforced rubber pads cut from recycled truck tires.
Rubber pads laminated between steel angles and secured with 3/4” rods
Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
Wall mounting hole size is 7/8” diameter.

.......more details

WRW

Erone Wiegand Wireless Receiver 433MHz

433 MHz radio frequency systems offer longer range (up to 250m (820ft) less interference jamming and excellent reliability.
KeeLoq® Rolling Code technology ensure ultra-secure transactions.
Output: Wiegand 26 bit
Power requirements: 12 or 24V (AC or DC)
Dimensions: 105 x 45 x 28mm (4.3 x 1.75 x 1.1in)
Compatible with Centaur and any 26 bit Wiegand-capable systems

.......more details

Wireless System Chart

BOARD060R

Manaras Replacement Circuit Board (No Monitoring)

Control board for BOARD065

MG00001

Micanan Ribbed Hex Nut 1/2" -13UNC

Used on PRO-GHC
4 required per operator

40-3505

LiftMaster Gate Warning Sign Plastic English

SL-310T-2

Skylink 2-Btn Visor Mount Transmitter 310 MHz ** No Longer Available

Easy to carry or clip on sun visor.
Works in conjunction with Skylink Universal Receiver: Model SL-310R.
Operating range of 100 feet and more.
12V alkaline battery included.

MV-00300

Micanan Banner Intrinsically Safe Reflective Photocell ONLY (0-25ft. Range)

Model Q45AD9LV same as part # 37620
Range: 9 m; Input: 5-15V dc
Output: NAMUR
2 m (6.5 ft) cable
Nema rating: NEMA 6P
DOES NOT include the bracket or the reflector. Use MV00482 for the kit

.......more details

T-931-MH

1-btn Mini Transmitter P219-1K-311 MHz (New # T-931-MS)

Keystone-Heddolf miniature 1 button transmitter 311mhz
12 volt battery and keychain included
(9) 3-position dip switch format
Compatible with Keystone T-931-H and Allstar T-931 and T-931-M
Also known as FIR311DEK31K

Programming instructions

K74-18379

LiftMaster Hall Effect Sensor for SL575 SL585

Hall effect assembly for SL540/570/580/575/585 operators with GL Board
Includes: screws flat washers lock washers and replacement instructions
Same as: G74G0487
This part has a short lead-in wire and will not work with SL590 or SL595

BL229-GATE-OP

Automatic Systems Universal Perimeter Raising Barrier Gate 120V

Highly configurable barrier designed for many applications and environments
Numerous accessories offered allowing to meet various installation constraints and various requirements in terms of security
Barrier equipped with control unit allowing operation perfectly adapted to every situation
Change of configuration or operation possible even after initial installation of the product

Bilingual parts catalogue Technical manual

41A5658

LiftMaster Gear & Sprocket Assembly for 2595 3595

Dual sprocket assembly for 3/4 HP chain drive operators.
Kit includes: Spring and thrust washer retaining ring bearing plate (2) roll pins dual drive and worm gear helical gear (with retainer) and grease.
For use Chamberlain Liftmaster chain drive models: 2595/3595/3595S

.218-325-DS75

Mini Storage Spring for DS75 4x7 Door

Spring only with loop ends

734

Fasteners Track Bolt 1/4-20 x 3/4" 250/Box

Knurled shank
Max torque = 6

K75-34824

LiftMaster Chain Guard Kit for SL575GL SL585GL SL585U slide gate operators

Complete with: Chain Guard Chain Guides and Retainers.
Works with SL575GL SL858GL and SL585U

226-9312

Lithium AA 1.5V Battery

Used in IG2 photo eyes

WASHER008

Manaras Type A Plain Washer 5/16" Zinc Plated

Used on old MJH

MEL-T315

Miller Edge MEL Transmitter 315 MHz 2nd Generation

MEL provides a wireless signal transmission from an edge sensor to operator controls eliminating the need to hard wire these devices

FHKS3D-74

Stainless Steel Face Hardware Kit 3" Track Double End Stile 4 Panel 7 Sections

Kit includes: Top & Bottom fixtures Center hinges End hinges and Hinge screws.
304L rust-resistant stainless steel
12 gauge

124844

1" Nylon Bushing

MD-00035

Micanan Offset Link #410

MALED12

LiftMaster LED Barrier Arm 12 ft

The NEW LED Barrier Arm provides exceptional visibility 24 hours a day.
Durable aluminum arm with integrated red LED lights on one side and Red/White DOT tape on both sides.
Ideal for use with the Mega Arm and Mega Arm Tower

MALED17

LiftMaster LED Barrier Arm 17 ft

The NEW LED Barrier Arm provides exceptional visibility 24 hours a day.
Durable aluminum arm with integrated red LED lights on one side and Red/White DOT tape on both sides.
Ideal for use with the Mega Arm and Mega Arm Tower
Counterweight required part # MALEDCW

CB3160500-KOR

Cable 3/16" 7x19 500' Galvanized Supreme

Galvanized cable 3/16" 7x19 500ft spool.
Cable break strength: 4200 lbs
A higher quality cable compared to the Chinese cable
Meets endurance test requirements of over 35000 work cycles
Lubricated for flexability and longer service life

Comparison charts

MK00701

Micanan Smart 10.0 Full Feature Circuit Board Monitored with Heavy Duty Relays

For 1 HP 110/220V Single Phase 230/380/460V 3 Ph
The board has P1 & P2 terminals

Instructions Manual

ME120-C

Miller Edge Aluminum Mounting Channel Sold per Foot

1-1/16" Wide 9/16" High

71-10345

LiftMaster RPM Sensor Board (MT only)

M-VERSION

Manaras Monitored Entrapment Protection Option Upgrade Mont Thru-Beam + N1 Eyes

Upgrades added when purchasing a commercial operator

50680

Doorlec Clutch Assembly for LJH

P219-1

Heddolf 1-Button Mini Transmitter 318MHz ** Available to Extent of Inventory

Open/Close mini remote for 1 door
8 dip switch
Allstar compatible

Programming Instructions

34538R

Genie Up Limit Switch Assembly 66" Wire

For up direction on a ChainGlide System using magnetic limits
For models: 350ML 500ML 700ML 800ML and other ML Series ChainGlide door openers
Also for Overhead Door Python ChainGlide garage door openers
66" inches of wire attatched

29-10338

LiftMaster Capacitor 70uf 230V 60Hz

For models: MJ5011 MH5011 HMJ5011 MT5011 and BMT5011

860LM

LiftMaster Universal Weather Resistant Receiver

Weather-resistant for outdoor mounting requirements
Provides convenient access to gated communities industrial facilities and commercial sites all with a single transmitter solution
Three channels provide expanded remote control capacity: Channel 1 - 50 remotes Channel 2 - 20 remotes Channel 3 - 20 remotes
Multiple remote control options available to provide secure access from the safety and convenience of a vehicle
Compact design fits most gate and commercial door operators
Compatible with 811LM 813LM and all MAX remote controls

.......more details

Programming Instructions Instructions de programmation Sell Sheet

SSZP10-6

Solid Shaft 1" Keyed Zinc Plated 10'-6"

41A6104

LiftMaster Cable Tension Monitor

Used on jackshaft model residential garage door openers

NTE5326

Bridge Rectifier 25A 600V

Bridge Rectifier Converts AC to DC voltage
For powering DC accessories when AC transformer present
Small size with convenient mounting hole in center
Same as MCCM2506-RH

Characteristics

20-1100C-2P

LiftMaster Electric Motor 1HP 115/230V 1P

Replacement motor for SL595

MGR-2

Linear 2-Channel MegaCode Gate Receiver 318 MHz *** To Extent of Inventory

Two Form ”A” (normally open) relays rated at 30 Volts AC/DC up to 5 Amps
Supplied with whip antenna three feet of coaxial cable and bulkhead connector
Memory: storage for up to 40 MegaCode transmitters
Power: 12 - 30 VAC or 10.5 - 30 VDC
Codes: 1000000+ (MegaCode format)
RF frequency: 318 MHz

.......more details

Installation Manual

SEL2641R433-I

Erone 2-Relay Stand Alone Receiver 433MHz

Up to 85 transmitter keys
1 NO relay + 1 NO/NC relay (24VA)
Self-learning memorization
Standard pulse output relay
Power requirements: 12/24Vac/dc
Dimensions: 105 x 45 x 28mm (4.3 x 1.75 x 1.1in)

.......more details

Instruction Manual Sell Sheet Brochure Wireless System Chart

CABLE_316SS-500

Cable 3/16" 7x19 500' Stainless Steel

Comparison charts

71-199010

LiftMaster 12' Sash Chain Pack with Keyring

Common disconnect chain

L0172-092

Low Temperature Grease 10oz Tube

Lubriplate multi-purpose low temperature grease.
Excellent cold operating characteristics

NX21

Allen Bradley 24V Reversing Contactor

Allen Bradley no. 104-C16KJH22-X6
Cat no. 100-C16*10

7FT-RAIL-BELT

LiftMaster 7' belt drive rail 2777BD - colour code: Grey

Price reflects cost if purchased with an opener

MK00641

Micanan Smart 10.0 Full Feature Circuit Board Monitored with 5 Relays

For 1/3 1/2 and 3/4 Hp - 110/220V 1p 230V 3p
Board has P1 & P2 terminals
Up to 20 transmitters can be programmed

Instructions Manual

MK00488

Micanan Electronic Circuit Board Monitored

Replacement board for PRO-LH (50-11)
Board has terminals P1 & P2
Up to 20 transmitters can be programmed

Instructions Manual

831-RJ

Allstar 1-Door O/C/S Receiver in Oil Tight Case (JIC) 107478 318 MHz *** To extent of inventory

Three channels - three relay outputs
Oil-tight JIC ABS case
Terminal strip for wiring
Wire whip antenna with "F" connector
Compatible with Allstar Classic Allister and Pulsar dipswitch transmitters and MVP quik-code transmitters
Power: 24 VAC/VDC

.......more details

Programming Instructions - Dip Switch Version Programming Instructions - Learn Button Version

639T

Allstar 3-btn 9-Door O/C/S Transmitter 107476 318 MHz ***Replaced by P-639T

Open/Close/Stop remote for 9 doors
Compatible with 3-channel Allstar and MVP receivers
Stationary mounting
Easy access to battery and coding switch
Power: 9-volt battery
Codes: 6561 (set by eight trinary dip switches)

.......more details

Programming Instructions

HAE00048

Linear Helical Gear with Grease

Includes roll pins
Can be used on all Linear / Westinghouse residential operators.
Helical gear measures 2-7/8" diameter

HAE00040

Linear Control Logic/Receiver Board

Replaces HAE00039
Control board for LSO LDO LCO models

BLOCK-RED

Spring Repair Blocks .3750-.4305 Pair

For the temporary repair of a broken spring.
Wire size: .3750 - .4305

DBE-30

Molded Rubber Bumper Black 30" L x 4 1/2" W 3" Projection 6-Hole Sold Individually

Manufactured from reinforced prime rubber
Rectangular horizontal mount
Ideal for light traffic loading docks.
Molded bumpers are molded in one piece and will not warp rust rot or harden.
Perfect protection for in-plant wall protection from forklifts and other material handling vehicles.
Bumper comes with 6 pre-drilled countersunk mounting holes drilled to accept 3/4" anchor bolts

.......more details

423LMC

LiftMaster 3-Channel Co-Axial Receiver 390 MHz

8" coaxial antenna included
Used for open/stop/close on commercial motors
N/O and N/C selectable
Compatible remote: 33LM

Installation Manual Manuel d'Installation

25-10113**DISC

Truck Door 2" Steel Roller Long Stem for Whiting Roll-Up Doors Use Part # 94-61180-33-84

Unplated shaft 10 roller ball design
Shaft Length: 6.5" Overall Length: 7.5"
Long stem roller has a staked collar design versus machined collar on others.

25-10001

Truck Door End Hinge for Todco Roll-Up Doors

Zinc plated steel construction
Four-knuckled to ensure smooth door operation
Cross Reference: T #69035 W #4007 220000

P294-K

Heddolf 4-Wire Single Channel Receiver with F-Connector 318 MHz

Controls one gate or garage door.
318MHz
12 or 24VAC or VDC
9 three position dipswitches (+/0/-) •Switchable relay for pulse to continuous
5 wires: 2 for power 3 for relay contacts
Coax antenna not included. Please see MK-00719 86LM.

.......more details

MGT

Linear MegaCode Gate Safety Edge Transmitter 318 MHz (DNT00068)

The MGT is the industry’s only fully supervised gate safety edge transmitter.
It automatically sends an hourly status report to the access controller indicating battery condition and if the transmitter is operational.
Should the edge sensor be disconnected shorted or tampered with the MGT will report a trouble condition.
Features Include:
Signals access controller for stop or reverse when safety edge activates
No cables or coiled wires

.......more details

Programming Instructions

DM11VL-T/FORCE

Cable Drum Vertical Lift 11' D850-132 Pair Torque Force

11' Vertical Lift aluminum die cast alloy.
3/8"-16 x2" hardened cup point set screws installed with red heads.
Color coded: Red=LH and Black=RH. Pair includes (1) LH and (1) RH. Max. Door Height: 11'-1".
Rated Lift per Drum: 425 lbs.
Max. Cable Diameter: 3/16".
Mounting: 1" solid shaft with 1/4" keyway.

.......more details

8030234

Marantec Chain Connector Kit

Works for all Marantec Chain Drive Openers
For models: Mac Lift M4500M4700Q7500Q7700 M4500e M4700e
Includes two connector pieces and four screws
Not for use on the heavy duty rails used by Q7900 & M4900e

RN1124

Roller 2" Nylon 4" stem 11 ball White

White Nylon Roller Wheel Diameter: 2"
Working Length: 3.75" Overall Length: 4.69"
Box qty: 150 Box weight: 49 lbs (2-4-11 White Nylon)

SETR2641AM2KP

Erone 2-Channel Mini Transmitter with Paradox Tag Black 433MHz

With built-in Paradox tag
Heavy-duty construction
Elegant & easy to carry
Unobstructed range: 656 ft (200m)
60 x 36 x 16mm (2.35 x 1.4 x 0.6in)
Two lithium batteries (CR2016) included

.......more details

Wireless System Chart

OTBHW-6112-AM06

Manaras Apt-Style Trolley Op w/Carwash Mod 1/2HP 120V 1Ph Monitored w/N4 Eyes Silencio

The Silencio operators have integrated noise reducing enhancements which make it 4X QUIETER than the Premium Trolley Apartment model (OTBH-A.05).
A low headroom apartment type garage door operator designed for use on industrial standard lift sectional doors with high cycling daily frequency requirements
Mounting (Low Headroom Design): Ceiling-mounted with only 6.25" headroom clearance required below the tracks. For indoor use only.
Dimensions: Back Room: door height + 4'5" (1350 mm)
Head Room For Tracks: 5.625" (143 mm) above the highest point of door travel
Comes with carwash modification and tracks/chain for doors up to 12ft

.......more details

Q123

LiftMaster Electric Motor 12VDC K20-9012B-1

For use with various LiftMaster® Slide and Swing Gate Commercial Door Operators

15-50B22LGH

Sprocket 22 Teeth 1" Bore 1/4" Keyway w/SS

ox Quanity is 18 per box

RTBH-6114-AM06

Manaras Silencio HD Trolley Op. 1HP 120V 1PH Monitored VFD

The Silencio® RTBH-A.06 is a heavy-duty apartment type garage door operator designed for use on properly counter-balanced industrial standard lift sectional doors which possess high-cycling daily frequency requirements
Soft-Starts and Soft-Stops
Electrically activated drum-band type solenoid brake
Ceiling-mounted with 8.69" headroom clearance required below the tracks
Dimensions: Back Room: door height + 4'5" (1350 mm) Head Room For Tracks : 5.625" (143 mm) above the highest point of door travel
Tracks sold separately

.......more details

HSLG-111

Linear Commercial Slide Gate Operator 1 HP 115V 1 Ph - Heater not Included

Integral entrapment sensing system with dual multi-turn precision potentiometers for accurate adjustment and enhanced safety
Continuous-tone entrapment alarm with reset button
Integrated warning beeper during gate movement
15 diagnostic LEDs on board for ease of setup and troubleshooting
Selectable pre-start alarm with provision for ADA compliant visual pre-start and run alarm
On-board APeX Controller three-button control station

.......more details

RLC-K36

Miller Edge Light Curtain Non- Monitored 3ft NO/NC

Light curtain made up of a series of thru-beam photo eyes designed to provide a dense barrier of protection for motorized or high speed doors.
Ideal for environments that require expanded protection for protruding parts that may not be detected by standard single-beam photo eyes mounted 6" above the floor.
Ideal for pre-2010 installations not requiring a monitored solution.
Ability to span up to 32' wide
Universal mounting brackets included
IP67 waterproof housing

.......more details

HA-434TL

SkyLink Wireless Motion Sensor

Supervised Sensor: monitors the sensors and their battery condition automatically
Motion detecting range: 40 feet.
Operating range: Up to 800 feet.
Easy to set up (Battery not included).
FCC/IC approved.
Sensors are weatherproof but not waterproof. Sheltering it from the elements is recommended

.......more details

14-1000

PVC Roll 6" x .060 x 400' Standard Clear Smooth for Replacement Strip Curtain

Suitable for most average applications.
Temperature Range: -20°F to 150°F (-28° C to 66° C).
Formulated with ingredients that meet USDA requirements for incidental food contact.