Devanco Canada

 
User Name:
Password:
Remember Me:
Forgot your password
Request a Login
Home
SELECTOR-8L5

Devanco replacement rotating 8 position switch selector for 8L5-OCS

  • replacement rotating encoded 8 position selector for 8L5-OCS
SELECTOR-BTN-8L5

Devanco replacement rotating black button for 8L5-OCS

  • replacement black button but for rotating 8 position selector for 8L5-OCS
SPGAP06400A

NICE Replacement Nylon Insert Kit

1004-2-14'

Aluminum Bottom Retainer 2" U-Shape with Reinforcement 14 ft***Actual Length 14'2"***

  • For door thickness 2"
2376.192.29.910

Whiting Torsion assembly .192 wire size 29" spring length 91" shaft

  • This is a full balancer assembly
12576

Doorlec Clutch Disc Fiber 4" dia.x 1" bore

  • Fits model ETBHW/ETHW
DHJ501L5-LH

LiftMaster Ind. Duty Hoist/Jackshaft Op. 1/2 HP 115/230 VAC Logic 5 Left Hand***Discontinued

  • Industrial-Duty Hoist/Jackshaft Operator with Internal Door Lock Sensor
  • Optimal for shopping mall applications with heavier rolling doors and grilles.
  • Provides a floor level chain hoist to ease manual operation in an emergency or power outage.
  • Includes a door lock sensor to prevent damage to the door and operator caused by attempts to automatically open a locked door.
  • Industrial Ball Bearings on 1" Output Shaft
  • Second Floor-Level Disconnect for Manual Lifting in an Emergency
    • .......more details
31355

Doorlec Sprocket 80B14

BCSI-PM12

Pivin Drapeau Clutch Disk for BCSI Gate Operator ** Price by Quote Only

  • Phenolic Friction Disc
DW-3S-300

Fraba Air Wave Switch Larger Housing with Copper End NOC

  • Fraba DW3S-300 air switch 10008797-2
  • Normally Open Contact (NOC)
  • Screw Type Connector
  • Dimensions: 158x60x39 mm (6.22" x 2.36" x 1.54 '')
  • Housing: ABS Switch: PA6V0 Nema4
  • Normally Closed Contact achieved by adjusting the sensitivity screw
    • .......more details
Operating Instructions
MP00069

Micanan Jackshaft w/Aux Trolley Assembly Mod. 7ft High Door #41 Trolley Drive Chain

  • Provides an auxiliary trolley assembly where otherwise a jackshaft operator may be preferred
  • NOTE: Operator must be supplied with reverse limits
  • If purchasing for field install the limits on the operator would need to be reversed
MT22-GRAY-LH

Miller Edge 2-Wire Pressure Sensitive Edge Sold per Foot Gray

  • Electromechanical small profile edge for rolling steel foor applicaton. •Touch sensitive signaling allows for immediate stopping or reversing of motion. •The MT22 is completely flexible and will contour to curved surfaces. The MT22 also acts as weatherstrip. •Lead wire: 22 gauge universal •Sensitivity: nominal 6-8 PSI •2 wire NO configuration •Horizontal mount •ANSI/UL325 recognized component •One year warranty
WorksheetInstallation manualSell sheet
50690

Doorlec Clutch Assembly for ETBH

CAM017

Manaras Synthetic Disconnect Cam Opera

50200

Doorlec Front Idler for ETB-3 with 410B9 -5/8" Sprocket

1004-2-12'

Aluminum Bottom Retainer 2" U-Shape with Reinforcement 12 ft***Actual Length 12'2"***

  • For door thickness 2"
CP-CLH-58

Lynx Clutch Hub 5/8"

729014

FAAC Manual Release Dial

K75-32463

LiftMaster Clutch Kit for SL595U

  • Compatible with model SL595U Slide Gate Operators
PRO-HHD-10053E-R

Micanan 1 HP 575V 3P Heavy-Duty Jackshaft NM ECB No Eyes Right Hand

  • 1 HP575V 3 PH Industrial Continuous Duty Jackshaft Operator Ideal for Sectional Doors Rolling Steel
  • Non-Monitored logic board with integral 372Mhz radio receiver that can hold up to 20 transmitters (MK-00647/ MK-00653/ MK-00659) or 200 of the 1 channel hand held transmitters (MK-00660).
  • 3-btn O/S/C (02-103) wall control station included
  • Adjustable Friction Clutch 5L320 drive belt
  • #50 Roller chain 18 tooth door sprocket included
  • Emergency chain hoist with electrical cut-off for manual operation
    • .......more details
Installation ManualSpecification Sheet
K76-37667-2

LiftMaster Limit Box Kit

  • Compatible with model SL585 Slide Gate Operators.
SL595203UL

LiftMaster Dual Voltage Slide Gate Op.2 HP 208/230/460V 3 Phase - Heater NOT Incl. UL325

  • UL 325 compliant system.
  • Power: 208/230/460/575 VAC. 3 Phase.
  • Accessory power: 24VAC 500mA max.
  • Monitored safety inputs: 3 Main Board 3 Expansion Board.
  • Temperature specs: Without Heater: -4°F (-20°C) to 140°F (60°C). With optional heater (HTRNB: HTR460 for 460V operators): -40°F (-40°C) to 140°F (60°C)
  • Gate travel speed: 12 in. per second.
    • .......more details
Installation manualManuel d'installationFirst step for installationPremière étape pour l'installationSell sheetWiring diagramWiring diagram 575V
1004-134-14'

Aluminum Bottom Retainer 1 3/4" U-Shape with Reinforcement 14 ft**Actual Length 14'2"***

  • For door thickness 1-3/4"
H-0166

Autogate VBelt Banded B-59

  • New Style Double Reduction
MZ-00005

Micanan Synthetic Oil in Reducer Cold Temp. Mod.

  • For models PRO-GH GHC GT and GSD
41D8859

LiftMaster Cover 8550WL WLED

  • Burgundy Replacement Cover.
  • This one piece cover is compatible with various LiftMaster® Lock Capable Garage Door Openers Powered by myQ®; manufactured after 2017
31105

Doorlec Sprocket 41B23 1" Bore

PRO-GJ-5011R-RH

Micanan 1/2HP 115V 1P Gearhead Operator with Mechanical Contactor

  • Includes 3-btn O/C/S control station Nema 1
  • External radio control terminal strip
  • Heavy duty worm gear reduction in oil bath gearbox
  • 1/2 HP high starting torque instant reverssssible motor
  • #41 roller chain drive & 41B19 operator drive sprocket
  • Emergency floor level disconnect for manual operation
    • .......more details
K1D8389-1CCU

LiftMaster Upgrade Kit with Eyes DC Pad Mount for UL325

  • Upgrade Kit for models CSW24V CSW24VH CSW24VDC CSL24V CSL24VH and CSL24VDC UL325 Approved Gate Operators; manufactured 2012 to 2015.
  • Complete kit includes: Main Control Board Expansion Board LiftMaster® Monitored Retro-Reflective Photoelectric Sensor Kit UL Upgrade label and Adapter Harness (used with CSW24V CSL24V and CSL24VH only)
31104

Doorlec Sprocket 41B23-5/8"

Q028

LiftMaster Manual Crank for SL3000 (K07-50303) **DISCONTINUED

  • Hand crank for SL3000
PRO-GH-10021U-R

Micanan 1 HP 220V 1P Gearhead Operator N1 Eyes Monitored ECB Right Hand

  • Includes 3-btn O/C/S control station Nema 1
  • External radio control terminal strip
  • Heavy duty worm gear reduction in oil bath gearbox
  • Solenoid brake standard
  • #50 roller chain and sprockets on final drive
  • Emergency chain hoist with electrical cut-out switch for manual operation
    • .......more details
PRO-GH-10021U-L

Micanan 1 HP 230V 1P Gearhead Operator N1 Eyes Monitored ECB Left Hand

  • Includes 3-btn O/C/S control station Nema 1
  • External radio control terminal strip
  • Heavy duty worm gear reduction in oil bath gearbox
  • Solenoid brake standard
  • #50 roller chain and sprockets on final drive
  • Emergency chain hoist with electrical cut-out switch for manual operation
    • .......more details
BBSI-BCSI

Insulated Cabinet Option for BCSI Gate Op ** Price by Quote Only

MP-00072

Micanan Jackshaft with Auxiliary Trolley Assembly 14' High Door #41 Drive Chain

  • Provides an auxiliary trolley assembly where otherwise a jackshaft operator may be preferred
  • Operator must be supplied with reversed limits
  • For models: PRO-J H HHD GH GHC
WASHER014

Manaras Type A Plain Washer 5/8

MO00027

Micanan Clutch Spring 0.218 x 0.812 x 1" 4 Coil Zinc

C-6X48-2-BLK

Thermal Window 6" x 48" for 2" Door Black

  • For 2" thick door
CM30E

Push-to-Exit Button Green

C-26-1/2X14-134-W

Thermal Window 26-1/2" x 14" for 1-3/4" Cedo Door White

  • For 1-3/4" thick door
K74-30763

LiftMaster Plug-In Transformer 120VAC ****Discontinued Use APOW3

  • 120VAC 50-60Hz 36VDC 1.1A Output
  • Used on the LA400
  • Discontinued in 2018 use APOW3 instead
C184-24B

Coil Cord 4 Wire 18-Gauge Black Extends 24ft

2500-2393

Linear Apex I Module

  • Older model prior to Jan 2016
10PBJL

Jamb Push Plate SS with Handicap Logo Only

  • 1⁄16 inch thick stainless steel for maximum durability
  • Concealed fasteners to minimize vandalism
  • Compatible with both surface and flush mount boxes
  • Faceplate Material 16 gauge 304 2B Stainless Steel
  • Backplate Material 1⁄8 inch thick Aluminum
  • Mounting Screws Stainless Steel 6-32 × 1 in & 8-32 × 1 in Allen Head Size: 5⁄64
    • .......more details
2500-1980

Linear 3-Phase Motor Board

  • Motor board for "green board" generation OSCO gate operators.
  • For HSLG BGU GSLG VS-GSLG SLC and their variants
PRO-APTC-5043-U

Micanan 1/2HP 460V 3P Apartment Trolley Op. Photo Eyes Monitored ECB

  • Low clearance design for APT applications (8.5")
  • Door speed: 7" per second
  • N-4 Micanan compatible monitored photocells included
  • Monitored board
  • Side access hinged cover for easy access to controls
  • Three button open-close-stop control station Nema-1
    • .......more details
Installation manual
PRO-APTC-5021-U

Micanan 1/2HP 230V 1P Apartment Trolley Op. Photo Eyes Monitored ECB

  • Low clearance design for APT applications (8.5")
  • Door speed: 7" per second
  • N-4 Micanan compatible monitored photocells included
  • Monitored board
  • Side access hinged cover for easy access to controls
  • Three button open-close-stop control station Nema-1
    • .......more details
Installation manual
TRMC38E

Telco Light Curtain Bracket 4/pkg

2807.171.200

Whiting Spring Assby .171 x 2-3/16 x 20" L Curbside

  • Replacement torsion spring with cones
  • Specs: .171 x 2-3/16" x 20" Long
  • For Roadside order part # 2806.171.200
MOUNTSHAFT017

Manaras Clutch Shaft Kit for MTH MTBH (no pulley) Old Pre-1998

  • Input / clutch shaft kit for MTH MTBH
  • For old MTH MTBH with 1" diameter input shaft no pulley included
20104

Doorlec Coupling Spring 5/8" LJH

1005-1-3/8-8'

Aluminum Bottom Retainer U-Shaped 8' Long

  • For door thickness 1-3/8"
25-01426

Truck Door 1/8" Stainless 97" 1/4 eye 7x19 Pair for Roll-Up Doors

  • Works with both Whiting and Todco doors
  • Nylon ends are used on 1/4" eye cables
IRB-TX

EMX Industries Transmitter Board Only for IRB-4X *** NLA

GOFF-G2-LITE-3000

Goff High Performance Door Made to Order

  • Custom made to spec
93D341

LiftMaster Cover Only Silver for EL25

  • Also known as 041D0341 41D341
  • Replacement cover for EL25
SPRING009

Manaras Clutch Spring 5/8"

MH00075

Micanan Shaft Collar 5/8"

2500-562

Linear Tokens for Token Acceptor 1000/pkg

  • Token only
MK-00034

Micanan Overload Reset 1-Phase 5 Amps

MOTOR272

Manaras Electric Motor 1/2HP 600V 3PH

  • Continuous-duty base mount ODP 60Hz •This item is compatible with BRAKE011
PRO-4X_MOD_3HP

Micanan Nema 4X Modification 3HP

  • This modification provides a washdown motor N-4X corrosion proof stainless steel control box enclosure waterproof drive and limit chain and a corrosion proof three-button station.
  • For options M & U Micanan N-4X photocells are supplied
  • For 3HP motors
36-54-200

Extension Spring 9' Door - 200 lbs

  • Clipped ends
  • 36" long 54" stretch 200 lb load
C-334-114-INSTAL

Cones 3-3/4" Factory Installed (Pair) 1-1/4" bore

  • For do-it-yourself installation use part no. SF375-114
1004-134-10'

Aluminum Bottom Retainer 1 3/4" U-Shape with Reinforcement 10 ft**Actual Length 10'2"***

  • For door thickness 1-3/4"
.437-6-L-C

Cut-to-Length Torsion Spring .437 x 6" Left Hand Wound Coated ** Price by Quote Only

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-600-INSTALLED
.437-6-R-C

Cut-to-Length Torsion Spring .437 x 6" Right Hand Wound Coated ** Price by Quote Only

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-600-INSTALLED
.393-6-R-C

Cut-to-Length Torsion Spring .393 x 6" Right Hand Wound Coated ** Price by Quote Only

  • Priced per inch - cones & filler sold seperately
  • For factory installed cones use part no. C-600-INSTALLED
.393-514-L-C

Cut-to-Length Torsion Spring .393 x 5-1/4" Left Hand Wound Coated ** Price by Quote Only

  • Priced per inch - cones & filler sold seperately
  • For factory installed cones use part no. C-514-INSTALLED
.375-334-R-C

Cut-to-Length Torsion Spring .375 x 3-3/4" Right Hand Wound Coated ** Price by Quote Only

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-375-INSTALLED
.343-6-R-C

Cut-to-Length Torsion Spring .343 x 6" Right Hand Wound Coated ** Price by Quote Only

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-600-INSTALLED
.331-6-R-C

Cut-to-Length Torsion Spring .331 x 6" Right Hand Wound Coated ** Price by Quote Only

  • Priced per inch - cones and filler sold seperately
  • For factory installed cones use part no. C-600-INSTALLED
  • For spring filler use part no. SPRING-FILLER
.331-334-R-C

Cut-to-Length Torsion Spring .331 x 3-3/4" Right Hand Wound Coated ** Price by Quote Only

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-375-INSTALLED
.331-514-R-C

Cut-to-Length Torsion Spring .331 x 5-1/4" Right Hand Wound Coated ** Price by Quote Only

  • Priced per inch - cones and filler sold seperately
  • For factory installed cones use part no. C-514-INSTALLED
  • For spring filler use part no. SPRING-FILLER
.331-258-L-C

Cut-to-Length Torsion Spring .331 x 2-5/8" Left Hand Wound Coated ** Price by Quote Only

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-258-INSTALLED
.319-6-R-C

Cut-to-Length Torsion Spring .319 x 6" Right Hand Wound Coated ** Price by Quote Only

  • Priced per inch. Cones sold separatly.
  • For factory installed cones order part # C-600-Installed
.312-6-R-C

Cut-to-Length Torsion Spring .312 x 6" Right Hand Wound Coated ** Price by Quote Only

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-600-INSTALLED
.312-514-L-C

Cut-to-Length Torsion Spring .312 x 5-1/4" Left Hand Wound Coated ** Price by Quote Only

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-514-INSTALLED
.312-258-R-C

Cut-to-Length Torsion Spring .312 x 2-5/8" Right Hand Wound Coated ** Price by Quote Only

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-258-INSTALLED
.306-6-L-C

Cut-to-Length Torsion Spring .306 x 6" Left Hand Wound Coated ** Price by Quote Only

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-600-INSTALLED
.306-514-L-C

Cut-to-Length Torsion Spring .306 x 5-1/4" Left Hand Wound Coated ** Price by Quote Only

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-514-INSTALLED
.306-258-R-C

Cut-to-Length Torsion Spring .306 x 2-5/8" Right Hand Wound Coated ** Price by Quote Only

  • Priced per inch
  • For factory installed cones priced seperately - use part no. C-258-INSTALLED
.306-258-L-C

Cut-to-Length Torsion Spring .306 x 2-5/8" Left Hand Wound Coated ** Price by Quote Only

  • Priced per inch
  • For factory installed cones priced seperately - use part no. C-258-INSTALLED
.283-334-R-C

Cut-to-Length Torsion Spring .283 x 3-3/4" Right Hand Wound Coated ** Price by Quote Only

  • Priced per inch
  • For factory installed cones priced seperately - use part no. C-375-INSTALLED
.283-334-L-C

Cut-to-Length Torsion Spring .283 x 3-3/4" Left Hand Wound Coated ** Price by Quote Only

  • Priced per inch
  • For factory installed cones priced seperately - use part no. C-375-INSTALLED
.283-134-L-C

Cut-to-Length Torsion Spring .283 x 1-3/4" Left Hand Wound Coated ** Price by Quote Only

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-134-INSTALLED
.273-334-L-C

Cut-to-Length Torsion Spring .273 x 3-3/4" Left Hand Wound Coated ** Price by Quote Only

  • Priced per inch
  • For factory installed cones priced seperately - use part no. C-375-INSTALLED
.273-134-L-C

Cut-to-Length Torsion Spring .273 x 1-3/4" Left Hand Wound Coated ** Price by Quote Only

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-134-INSTALLED
.262-334-R-C

Cut-to-Length Torsion Spring .262 x 3-3/4" Right Hand Wound Coated ** Price by Quote Only

  • Priced per inch
  • For factory installed cones priced seperately - use part no. C-375-INSTALLED
.250-334-R-C

Cut-to-Length Torsion Spring .250 x 3-3/4" Right Hand Wound Coated ** Price by Quote Only

  • Priced per inch
  • For factory installed cones priced seperately - use part no. C-375-INSTALLED
.234-258-R-C

Cut-to-Length Torsion Spring .234 x 2-5/8" Right Hand Wound Coated ** Price by Quote Only

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-258-INSTALLED
.234-258-L-C

Cut-to-Length Torsion Spring .234 x 2-5/8" Left Hand Wound Coated ** Price by Quote Only

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-258-INSTALLED
.234-2-L-C

Cut-to-Length Torsion Spring .234 x 2" Left Hand Wound Coated ** Price by Quote Only

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-200-INSTALLED
.218-258-L-C

Cut-to-Length Torsion Spring .218 x 2-5/8" Left Hand Wound Coated ** Price by Quote Only

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-258-INSTALLED
MAG-3

Magnetic Accessories Kit 3-Piece Combo

  • The MagTool clipboard tape gun and box all come with an integral 100lb. magnet which allows them to be easily stuck and removed from a metal surface.
PRO-GH-7583U-R

Micanan 3/4HP 208V 3P Gearhead Operator N1 Eyes Monitored ECB Right Hand

  • Includes 3-btn O/C/S control station Nema 1
  • External radio control terminal strip
  • Heavy duty worm gear reduction in oil bath gearbox
  • Solenoid brake standard
  • #50 roller chain and sprockets on final drive
  • Emergency chain hoist with electrical cut-out switch for manual operation
    • .......more details
Installation manualSpecification sheet
PRO-GH-7583U-L

Micanan 3/4HP 208V 3P Gearhead Operator N1 Eyes Monitored ECB Left Hand

  • Includes 3-btn O/C/S control station Nema 1
  • External radio control terminal strip
  • Heavy duty worm gear reduction in oil bath gearbox
  • Solenoid brake standard
  • #50 roller chain and sprockets on final drive
  • Emergency chain hoist with electrical cut-out switch for manual operation
    • .......more details
Installation manualSpecification sheet
218756

Torque Force Spring Failure Device 1" Shaft Right Hand Side DT0054

  • For springs 2" up to 6"
  • This device can be applied on Industrial OH doors that are manual or motor operated
  • Must be installed on a keyed shaft
PRO-GH-5023U-L

Micanan 1/2HP 230V 3P Gearhead Operator N1 Eyes Monitored ECB Left Hand

  • Includes 3-btn O/C/S control station Nema 1
  • External radio control terminal strip
  • Heavy duty worm gear reduction in oil bath gearbox
  • Solenoid brake standard
  • #50 roller chain and sprockets on final drive
  • Emergency chain hoist with electrical cut-out switch for manual operation
    • .......more details
Installation manualSpecification sheet
PRO-GH-5081U-R

Micanan 1/2HP 208V 1P Gearhead Operator N1 Eyes Monitored ECB Right Hand

  • Includes 3-btn O/C/S control station Nema 1
  • External radio control terminal strip
  • Heavy duty worm gear reduction in oil bath gearbox
  • Solenoid brake standard
  • #50 roller chain and sprockets on final drive
  • Emergency chain hoist with electrical cut-out switch for manual operation
    • .......more details
Installation manualSpecification sheet