Devanco Canada

 
User Name:
Password:
Remember Me:
Forgot your password
Request a Login

50195

Doorlec Front Idler Assembly with Shaft Trolley Models

  • Fits all Doorlec commercial trolley operators
  • Same as # 50190
27191A

Genie Opener Sprocket 10 Tooth

  • 10 Tooth Sprocket.
  • For Chain Drive Models: IC250 IC250B PMX60 PMX65 PMX75 PMX80 PMX85 PMX300-IC/A PMX500IC/A PMX300IC/B PMX700 PMX1200 GPS700 GPS1200-IC.
MOTOR254

Manaras Electric Motor 1/2HP 120/240V 1PH

  • Continuous-duty base mount 60Hz
  • This item is compatible with BRAKE011
K74-18379

LiftMaster Hall Effect Sensor for SL575 SL585

  • Hall effect assembly for SL540/570/580/575/585 operators with GL Board
  • Includes: screws flat washers lock washers and replacement instructions
  • Same as: G74G0487
  • This part has a short lead-in wire and will not work with SL590 or SL595
255744-BEAD

Wayne Dalton Bead Style Bottom Seal Yellow Sold per Foot

  • Yellow
  • Width: 5-7/8"
CP-SP-DISCONNEC

Lynx Hoist Spring MCJH CP-SP-DISCONNECT

CHS401-114

Chain Hoist Shaft Mount 1-1/4" Shaft 4:1 JR Torque Force (126685)

  • Shaft Mounted Junior Hoist
  • 4:1 Reduced Drive
  • Sprocket: 41B36. Bore size: 1-1/4" diameter
  • Cross Reference: OMI 4020
  • Requires minimum 3/8" center line offset.
  • Set includes: 26' of hand chain 22" of #41 roller chain Chain keeper (2) shaft collars 1/4" square key and a wall stabilizer bracket.
  • .......more details
ALUM-559

Aluminum 24" x 100' Spool Pebble / Kaki # 559

  • 20% thicker than the aluminum sold in retail stores (0.022" )
  • Gentek # 559
  • Reverse side is #431 Bright White
39438R

Genie Garage Door Opener LED Bulb LEDB1-R 1/Pkg

  • Unlike other LED and CFL bulbs this bulb will reduce or eliminate radio frequency interference
  • Uses 10 watts but equivalent to a 60-watt bulb
  • Works with almost all garage door openers
  • Lasts up to 25000 hours
  • Shatter-resistant vibration-resistant
  • Cold weather rated up to -30C
  • .......more details
FCC316-500

Cable 3/16" 6x19 Galvanized Fiber Core 500ft

  • For high-speed doors
  • 3/16” 6x19 galvanized
  • Polypropylene core to help prevent wear and increase flexibility
  • High life cycle wire rope for rapid doors
  • Lubricated during production for extended life
  • 500 feet per roll
  • .......more details
MK008050

Push Button Standard Residential Non-Illuminated 2 Wire Bell Button

  • SPST
  • 2 mounting holes
  • Dimensions: 2.375 x 0.875 x 0.75 inches
  • Color: Light Gray
  • Intended for indoor use
41AC150-1M

LiftMaster Electronic Circuit Board Assembly 315 MHz *** NLA Repl by 41AC050-1M

  • For Sears / Craftsman garage door opener
110550

Allstar MVP 3 Channel 24V 3 Terminal 4 Wire Receiver 318 MHz *** NLA

  • 3 channels 4-wire 3-terminal operator connection
  • Wire antenna included
  • Compatible with Allstar Classic Allistar and Pulsar dipswitch transmitters and MVP quik-code transmitters
  • Power: 24 VAC/VDC
  • Codes: 19683
  • RF frequency: 318 MHz
  • .......more details
AKR-1

Linear Exterior Digital Keypad with Radio (ACP00747) *** NLA

  • Self-contained keyless entry system ideal for airports hospitals warehouses office buildings parking lots and many other commercial facilities
  • Built-in radio receiver
  • Rugged cast aluminum enclosure for indoor or outdoor mounting on a wall or pedestal
  • Four independent outputs and timers: two form C relays and two solid-state open collector outputs with unique programming per entry code
  • Accepts 480 entry codes 480 block code transmitters plus one fully supervised Model MGT safety edge transmitter
  • Two LED indicators show system status
  • .......more details
WHITING-DOOR

Whiting Special Order Plywood Core Dry Freight Door Price by Quote Only

  • Special order to customer's specs
  • Premium grade 7 ply 3/4” panels manufactured with a medium density overlay (MDO) laminated to smooth hardwood outer veneers of Transportation Core plywood all designed for optimum strength and appearance.
  • 2" track and rollers for durability.
  • Tongue and groove joint.
  • 2 cable balancer with independent spring for each cable. Springs treated with rust preventative.
  • 4 rows of hinges.
  • .......more details
LYNX-6000-BOARD

Lynx 6000 Commercial Logic Board

  • Replacement logic board for Lynx commercial operators built from 2002 through 2005
  • Will not work for the ALDJ Model (Light Duty)
CS303-DB50

EMX Car Sense Direct Burial Sensor with 50 ft Lead Wire ** Replaced by the LRS-DB-50

  • Can be used for above ground applications ie.. strapped to a post or wall
  • Easy low cost installation
  • Small size of the detector allow for easy installation in pavement
  • Rugged sensor is also suitable for above grade installations
  • Includes direct burial sensor and 50 ft of lead wire
  • Advanced 3-axis technology for better detection
  • .......more details
DM518-125

Cable Drum Standard Lift 18' D525-216-125 Pair Torque Force

  • 18' standard Lift aluminum die cast alloy.
  • Pair includes: (1) LH and (1) RH.
  • Color coded: Red=LH and Black=RH
  • Max. Door Height: 18'-1" Rated Lift per Drum: 750 lbs.
  • Max. Cable Diameter: 3/16".
  • Mounting: 1-1/4" solid shaft with 1/4" keyway
  • .......more details
NIR-HD

EMX Industries NIR Hood Cover Steel

  • The hood keeps rain and other debris from distorting or blocking the photo beam.
  • It also helps to keep the sun from glaring off the reflector and disturbing the beam's reflection.
  • Replaces the mounting bracket that comes with the sensor.
  • Comes with Hood two sets of nuts and bolts and a plug
TAOS141W

Stainless Hinge Tek Screw 1/4" x 1" Self-Driller with Washer

  • Priced per each
2B747

LiftMaster Direct Connect Cable (41B0747)

  • EL25 conecting cable
745266

Strobe Low Profile Amber LED Warning Light 12-24VDC

  • Fully encapsulated electronic circuitry ensures a lifetime of trouble-free operation.
  • Installer can select the flash pattern of each high intensity strobe by wiring the unit according to the flash rate preferred.
  • 4 7/8" X 5 7/8" Rubber base Surface mount 12-24VDC
K20-5150LD

LiftMaster Electric Motor 1/2HP 120V MT/MH Motor

PHOTO-038

Manaras Non-Monitored Photoelectric Cells Nema 4/4X/6P/12/13 Retro-Reflective

  • Retro-Reflective
  • 24Vac 30' range
  • Includes 3" reflector
DC2000SL

LiftMaster Power Backup *** Discontinued

  • Keeps traffic moving during a power outage
  • Opens the gate when power goes out to allow vehicles to enter or exit
  • When power is restored the gate will return to normal operation
  • Compatible with operators: SL3000UL
MV00021

Swivel Type Pull Cord - SPST Nema 4

.363-6-L

Cut-to-Length Torsion Spring .362 x 6" Left Hand Wound Green/White

  • Priced per inch - cones & filler sold seperately
  • For factory installed cones use part no. C-600-INSTALLED
RS10295

Roller 2" Steel 9-1/2" stem 10 ball Hurricane Roller

  • High strength steel roller designed for hurricane applications
  • Wheel Diameter: 2"
  • Steel tire Stem made from alloy steel
  • Rated: 15000 cycles for a 12'h door
  • Load rating: 75 lb
  • Box qty: 100 Box weight: 62 lbs (2-9-1/2-10 steel)
  • .......more details
105104

Linear Gate Safety Edge Transmitter

  • 105104 is for adding obstacle sensing for motorized gates or barrier arms.
  • Using a safety edge transmitter is more economical and discrete than the traditional coiled cord connection method.
  • The transmitter mounts directly on the gate or barrier arm and wires to a standard exterior safety edge sensor.
  • Compatible with 310 MHz Stanley receivers and Model 109950 302850 and 309013 receivers.
  • Activates receiver for stop or reverse entrapment
  • No cables or coiled wires
  • .......more details
1104-ASFT-24FT

Elton Aluminum Stiffener for 1104 24ft

  • Prevents the 1104 from buckling in the hot sun
SERVICE-6220

Industrial Duty Rolling Steel Non-Insulated Service Door

  • 22 gauge
  • Max size: 18'4" max std. width 20'4" max std. height
  • Slate type: Curved
  • Finishes: Gray White Tan Brown or Galvanized
  • RAL Powder coat option in 188 colors
HDC-411-LH-CONT

Lynx Ind. Jackshaft with Hoist 3/4Hp 115V Contactor Left Hand

  • 1/2 3/4 1HP 115-230-460 or 575V single or three phase motor capacitor start overload and under voltage protection.
  • Solid state circuit board Lynx-6000. Built in 1.5 second delay.
  • 5L V-belt primary reduction #50 drive chain and sprockets.
  • Adjustable friction clutch magnetic solenoid brake.
  • Precision pillow block bearings on output shaft.
  • Fully driven adjustable limit switches.
  • .......more details
LD-11

EMX Base Socket 11-Pin DIN Rail Mountable Black (Was formally Grey)

  • For use with D-TEK detectors (most commonly used)
  • Hourglass shaped
MA116

LiftMaster 17 ft Aluminum Arm Round Yellow/Black Stripes ***NLA Repl. by MA116RDOT

  • Used on Mega Arm gate operators
  • Requires counterweight model MA117 - sold separately.
  • Size: 17 feet long x 3" round
  • Arm opening area: 14ft (end of cabinet to arm tip)
  • Replaced by MA116RDOT
K001A6426-1

LiftMaster Control Board with Mounting Bracket for LA412

414001

Linear 4-Channel Multi-Code Visor Transmitter 300 MHz

  • Compatible with 300 MHz Multi-Code receivers
  • Supplied with visor clip
  • Easy access to battery and coding switches
  • Power: 9-volt battery
  • Codes: 512 codes for each channel (set by dip switches)
  • RF frequency: 300 MHz
  • .......more details
97-75000

DOT-C2 Reflective Tape 24" x 2" W 6" Red x 6" White Pattern

  • DOT-C2 certified exceeds NHTSA requirements
  • Highly reflective even up to a 90 degree angle
  • Quick and easy to apply
IS40P

BEA Presence Sensor

  • Infrared presence sensor for use in industrial applications. The sendor utilizes 40 active infrared spots for reliable detection.
  • Ideal for use on automatic industrial doors vehicle gates/barriers and loading docks.
  • Equipped with 9 pre-programmed pattern configurations for various industrial applications.
  • Various learn time settings allow presence detection to either remain constant or ignore a motionless object after a pre-determined period of time.
  • Mounting height: 8-16'
  • Detection field: 10'x10' at max. mounting height of 16'
  • .......more details
1104-8'-DK-SAND

Residential Side & Top PVC Weather-Strip with cap 8' Long - Dark Sandstone (DDG)

  • Garaga dark sandstone rigid vinyl retainer with Garaga dark sandstone flexible vinyl seal.
  • Dual fin vinyl.
  • Comes with cap to hide screws.
H12G01-SS

Hinge #1 x 12 gauge Stainless Steel

  • Manufactured with 12ga. Rust-Resistant Stainless Steel
  • Universal Design
  • Fits Most Overhead Sectional Doors
  • Priced Per Each
BRAKE013

Manaras Band Brake Assembly Kit OSH

14JW

Rolling Steel 3" Flat Cast Endlock

  • Endlocks are riveted to curtain slats ends of every other slat to prevent slats from shifting laterally and to prevent curtain wear in guides.
  • Continuous endlocks are both ends of every slat.
  • Rivets included with endlocks
SLT17-20

Rolling Steel 2" Flat Slat 20-ga Galvanized

.273-1-3/4-LH-C

Torsion Spring .273 x 1-3/4" x 144" LH Coated ** Price by Quote Only

  • Black Oxide coating
  • Wire size painted on spring
  • Wire size: .273 ID: 1-3/4" Length: 12 ft
RN0039-SS

Roller 3" White Nylon 9" Stainless Steel Stem Double Sealed Bearing

  • A supreme double sealed bearing roller that never requires lubrication
  • Ideal for high usage and high moisture areas ie..carwash
  • 7/16" stainless steel shaft.
  • 200 lb load 100000 cycles of a 12' door
  • Stem Length - 8.312" Overall Length - 9.25"
OPH-6113-CONT-R

Manaras Opera-H 3/4HP 120V 1Ph with Mechanical Contactor Right Hand

  • A heavy-duty industrial jackshaft operator
  • For use on Standard High and Vertical Lift sectional doors
  • Can also be used on Rolling doors and Grilles
  • Comes with a self-engaging chain hoist for manual operation
  • Clearence: side room required 15"
Q029

LiftMaster Limit Switch for Elite Gate Operators (K23-50099)

  • Sold individually
  • For Elite Miracle-One arm SL3000 CSW200 and robo slide and robo swing gate operators.
  • Same as part no. K23-50099
MB-02001

Micanan Electric Motor Only 3/4HP 110/220V 1PH

  • Base Mount motor O.D.P. FR56
  • Used on Micanan's T TB APT J EJ H EHJ HHD & SD
1110197

LiftMaster Take Up Bolt 3/8"-16

  • Measures 3-15/16" Long
  • Also known as: G115015 1110197 115015 11-10197
YSG12-24LED

Devanco Stop and Go Light Yellow Housing 12-24V LED

  • LED Traffic Light Red/Green Dock Light
  • Weather-proof 2 piece housing with highest available UV rating
  • Wide input voltage range of 10-32V AC/DC eliminates the need to stock 12V and 24V models.
  • Ultra bright LED's for easy viewing in direct sunlight
  • Lenses measure nearly 4" in diameter
  • Requires 4 wall mounting screws 1/4" or 5/16" thread - not supplied
  • .......more details
9150000627

1/8" Stops ONLY 100/pkg

  • Stops only 100 per pack
2200-030

Linear Limit Nut

  • Used on various Linear Gate operators
8002-7FT

Side Weatherstrip with Black Rubber Bulb for Pedestrian Door 7ft Long

  • Aluminum and Black Rubber
  • Comes in 7ft lengths
R5997

Shaft Collar 7/16" ID x 7/8" OD x 7/16" W Zinc

  • Axial Load: 950 LBS
  • Screw length: 1/4"
  • Screw type: Socket set screw
  • Solid steel collar with set screw
Z9200

Cable Snubbers Sold as a Pair

  • Prevents slack from forming in cables
  • Sold in pairs
BRACKET112

Manaras Wall Mount Stud Bracket

  • This Wall Mount Bracket can be used with all Manaras Wall Mount commercial operators except the MRGH and MGH models
  • Will not work will Trolley Operators
02-711

LiftMaster Nema 7/9 Ceiling Switch Pull Control

  • Single Pull Switch Control
  • Hazardous Area Overhead Mt. (NEMA 7/9)
  • Die cast hazardous area enclosure
  • May be used in two different ways; as an OPEN only control (all LiftMaster operators) or as an OPEN/CLOSE control (only LiftMaster operators with types B2 and S2 control wiring). In the latter case pulling the cord will open a fully closed door close a fully opened door and reverse a closing door.
  • Pulling the cord whlie the door is opening will either have no effect (type B2 wiring) or will stop the door (Solid State Logic Control Board).
  • WARNING: When used on most industrial operators this control will not stop the door. Use another control that has a STOP button in conjunction with this control.
  • .......more details
MA031

LiftMaster Adapter Collars 2/Pkg

  • For use with Mega-Arm padded arm
MK-00648

Micanan 1-Channel 24V Receiver with Antenna

  • Comes with antenna MK00719
  • Total of 20 regular remotes can be programmed or 200 of the block coded remotes MK-00660
K001D8072-1

LiftMaster Single Phase Relay/Power Board (K001D8396-1)

  • For Logic 5 commercial operators
  • Same as K001D8396-1
  • 014D1276E
348.000

Whiting Tongue & Groove Bottom Panel Assembly with #77 Lock Made to Order. **Quote Only

  • 15-1/2" x 96" standard size panel.
  • Extra wide panels will carry an additional charge
  • Primer only
IS-3

Interlock Switch for Rolling Steel Doors / Grills

  • Prevents the control of the operator when the door is locked.
  • The switch is a normally closed contact which is connected to the operator interlock terminal.
110995

Allstar Classic 3-Btn Transmitter 318 MHz

  • Open/Close remote for 1 door
  • Quick code platform
  • Compatible with both MVP and traditional Allstar receivers
  • Replacement for 9921T 9931T 8822T 8832T 8833T 9921MT 9931MT 9921TK 9931TK 8832TK and 9931TK6
LA500-SLR-PKG

LiftMaster Solar Package for LA500 Gate Operator

  • Solar package includes: 2 - 33AH batteries 2 - solar panels (SOLPNL20W12V) battery harness (LA500SLRHARN) and the battery tray (K10-36183).
  • Must be used with the LA500-1PKG-XLM
  • Solar option NOT compatible with LiftMaster Internet Gateway
  • Solar option not recommended in certain areas - please call before ordering
27-20100

Truck Door T-Style Spring Assembly 60" Long

  • Wire thickness: .24"
  • Inside diameter: 1.75"
  • Includes bolt plug and winding plug wound onto spring for stronger design
  • Cross reference: T#51042 W#2701
25E10232

Truck Door Mounting Plate for Reefer Top Closure Bracket Black E-coat finish**To Extent of Inventory

  • Used with reefer top closure brackets 25-10230 25-10231
  • Black E-coat finish
ARK

LiftMaster Auto Reconnect Trolley Kit

41D7742-7

LiftMaster Travel Module

  • Fits models 8165 8355 & 8155W
36179R

Genie Traveler Assembly for Screw Drive

  • Fits model 3060 L/M
  • Replaces: 25589R 25589S 25589C 20414R 34107R 20073R & 24357R
MT5011U

LiftMaster 1/2 HP 120 Volt Medium Duty Trolley Operator

  • 1/2 HP 120 volt 1 phase medium-duty logic trolley operator
  • Medium-duty logic board with integral 315 MHz radio receiver
  • CPSU commercial photoeyes included
  • 4L V-Belt #48 drive chain adjustable friction clutch
  • Use on standard lift sectional doors up to 14' high and up to 12 cycles per hour
  • 2 year warranty
  • .......more details
12FT-TROLLEY-SET

LiftMaster 12' Track Set for Trolley Operator 10-5812-P (2pcs) *Actual length 179"*

  • Actual length: 179" (14' 11")
CPS-RPEN4

LiftMaster Monitored Retro-Reflective Photo Eye with Nema 4 Enclosure for Commercial Door Applications

PHOTO-061

Manaras Monitored Photoelectric Cells N4X (Fraba)

  • Monitored NEMA 4X enclosure through-beam type photocell
  • 4-Wire
  • Suited for industrial environments
  • Range: 45 ft
  • Supplied with 3ft of wire
HD-15

Reflector Hood for 3" Round Reflector

  • Black/Charcoal
8FT-RAIL-CHAIN

LiftMaster 8' chain drive rail 1708LMC - colour code: Blue

  • #48 chain size
  • Price reflects cost if purchased with an opener
41A4252-6G

LiftMaster Circuit Board Assembly ** Discontinued

  • Assembly includes: circuit board end panel and light socket
  • Also includes: 1 Multi-Function wall control panel - 2 wire
  • For chain drive units with two lights
  • Fits 1250 1260 1270 1280 220WD 320WD 5100 7200 & 8100
03-8024-K

Reversing Contactor 3-Pole

  • Reversing contactor with 24 VOLT coil
  • Dimensions: 3.5" long x 2.25" wide x 2.25" high
  • Telemecanique part # LC 2K09 107B7
S2TR2641E4

Erone 4-Channel Mini Transmitter 433MHz

  • Open/Close remote for 4 doors
  • Palm-size transmitters 83 x 48 x 16mm (3.25 x 1.9 x 0.6in)
  • Ergonomic stylish design rugged & durable
  • Light grey base with yellow buttons
  • Unobstructed range: 820 ft (250m)
  • One 12V lithium battery included
  • .......more details
OPH-6112-ECB

Manaras Opera-H 1/2HP 120V 1Ph with Electronic Circuit Board

  • A heavy-duty industrial jackshaft operator.
  • For use on Standard High and Vertical Lift sectional doors.
  • Can also be used on Rolling doors or Grilles.
  • Comes with a self-engaging chain hoist for manual operation.
  • Clearence: side room required 15"
  • 25 cycles per hour 100 cycles per day
  • .......more details
TRANSF143

Manaras Transformer 120/240-24V 40VA

  • Transformer 120-240V Primary 24V Secondary 40VA
RADIO-RE101C

Manaras Factory Installed Mod plug-in receiver for Board 70 operators 390 MHz

  • Direct ECB plug-in receiver card (factory installed)
  • 16 transmitters maximun per receiver.
  • Use part # RADIO-KIT004 when adding or replacing on-site.
  • This is now standard equipment on all Circuit board operators
5377.115

Whiting Side Seals 1/2" Track Spacing 115" Long

  • Most common side seal for Whiting Dry Freight doors.
  • 115 inches will fit almost every size door.
MCT-3

Linear 3-btn MegaCode Transmitter 318 MHz ** Use MTS3

  • Activates three 318 MHz MegaCode receivers
  • Test/operate LED
  • Visor mounting clip supplied
  • Two CR2032 batteries included
  • Codes: 1000000+ (MegaCode format)
  • Dimensions: 3" W x 1.875" H x .625" D
  • .......more details
HAE00047

Linear Complete Gear Set with Grease

  • Set includes: Helical gear worm gears and grease
  • Helical gear measures 2-7/8" diameter
RV-300

3" Vinyl Insert for Brush Retainer per foot

  • Color: Black
3002-200FT

Gum Hose 1/2" ID 200' Spool

  • 1/2" inside diameter
  • Installed in bottom "U" rubber for use as a safety edge
138BL

1-3/8" Light Brush Insert 6ft Long

  • Polypropylene bristles
  • Same as model MS1702
1003-4"-200FT

Bottom U-Rubber 4" Black 200' Long

  • 200ft spool of vinyl insert.
1006-1-1/2-16'

Rigid Vinyl Bottom Retainer U-Shaped 16' Long

  • Black with flexible fin to touch door face.
  • For door thickness 1-1/2"
BLOCK-BLUE

Spring Repair Blocks .2187-.3065 Pair

  • For the temporary repair of a broken spring.
  • Wire size: .2187 - .3065
25-42-130

Extension Spring 7' Door - 130 lbs Yellow

  • Double - Loop
  • 25" long 42" stretch 130 lb load
  • Sold individually
  • Rated for 10000 cycles
25-42-90

Extension Spring 7' Door - 90 lbs Light Blue

  • Double - Loop
  • 25" long 42" stretch 90 lb load
  • Sold individually
  • Same as part number 109
  • Rated for 10000 cycles
28-02101

Truck Door 2" Vertical Track and Right Angle Assembly 106.5" Roadside (LH) for Whiting Roll-Up Doors

  • SPECS: Length: 106.5" Fits door sizes: 91" - 100" high
  • Assembly includes: Right angle mounting track Vertical track and Torsion bracket
  • Cross Reference: W #2275-2
  • Galvanized steel 14 gauge construction
  • Tongue and groove for proper alignment at joints
27-20300

Truck Door Cable Drum Roadside (LH) for Todco Roll-Up Doors

  • Cast aluminum construction
  • Large die cast cable drums are grooved to prevent cables from binding or wearing prematurely.
  • Angle of cable slot determines left or right drum.
  • Holds up to 130" door cable
  • Cross Reference: T #59033-2 T #59129-2 W #4014 330000
1104-10FT-WHITE

Residential Side & Top PVC Weather-Strip with cap 10' Long - White (W)

  • White rigid retainer with white flexible vinyl.
  • Dual fin vinyl.
  • Comes with cap to hide screws.
365LMC

LiftMaster Universal Plug-in Receiver 315 MHz

  • Compatible with any garage door opener with a simple 2-wire dry contact
  • Includes 2-conductor bell wire
  • Able to accept 8 Security+ transmitters & 1 digital keypad
  • Compatible remotes; 893MAX 890MAX 892LT 373LM 371LM 374UT 375UT
371LMC

LiftMaster 1-btn Security+ Transmitter 315MHz

  • Visor clip and 3V lithium button cell (CR2032) battery included.
CP-SW-MIC

Lynx Limit Switch for Commercial Operator with Logic Board

  • Single limit with curved actuator lever
  • Switch attaches directly to the Logic 6000 board
26-40202

Truck Door Head Seal Retainer Only 96" Long for Roll-Up Doors

  • Retainer extrusion is constructed of high quality aluminum.
  • Panel mounted retainer
  • Cross Reference: T #69790 500000
38123A

Genie Powerhead Mounting Flange

  • Mounting bracket connects the powerhead to the rail assembly.
  • A tongue on the flange fits into the bearing block assembly on the rail to keep it in place.
  • Fits TriloG PowerLift GPower and PowerMax Operators