Devanco Canada

 
User Name:
Password:
Remember Me:
Forgot your password
Request a Login
Home
TRACK-3"-RAW-16

Raw Vertical Track 3" 184" 13g Sold as a PAIR

PPLK1PH-10

LiftMaster Passport Lite 1-Button Mini Proximity Remote with Sec+ 2.0 Technology 10/PKG

  • Passport Lite Remote Controls provide cost-effective single button access solutions for gate access only or high-capacity commercial properties applications such as employee parking lots and tenant garages.
  • These remote controls are specifically designed for gate access control and are not compatible with LiftMaster Garage Door Openers.
  • 2x the range of standard remote controls
  • Narrow-band transmission on 3 simultaneous frequencies (310 MHz 315 MHz 390 MHz)
  • Compatible with LiftMaster® commercial receivers (850LM 860LM PPWR STAR1000) and Security+ 2.0™ Gate Operators
  • Keychain remote control sold in a 10 pack
    • .......more details
Programming instructionsInstructions de programmationSell sheetBrochure
MH00109

Micanan Flanged Snap Ring 3/4" ID Precision Bearing

TRACK-3"-RAW-14

Raw Vertical Track 3" 14'-0" Sold per Piece

50-HERK-RC2

Hercules Infrared Programming Remote Red (50-HERK-RC2)

  • Conveniently choose from 8 different preset comfort functions to adjust detection fields mounting heights relay hold interval cross traffic optimization direction recognition people/vehicle separation slow motion detection turn on/off filter functions open the door manually and much more
  • Bidirectional
  • Fine-tune the motion detector from the ground without guessing if all the settings have been received by the sensor
MOUNTSHAFT012

Manaras Clutch Shaft Kit for MSJ

PRO-GH-10083U-L

Micanan 1 HP 208V 3P Gearhead Op. N1 Eyes Monitored ECB Left Hand

  • Designed for use on all rolling doors and grilles and for large sectional doors with high or vertical lift.
  • Full function smart 10.0 logic board featuring on-board receiver with antenna and enhanced program selections.
  • External radio control terminal strip
  • Three button O/C/S control station Nema-1
  • Supplied with Nema-1 photocells
  • Emergency chain hoist with electrical cut-out switch for manual operation
    • .......more details
Installation manualSpecification sheet
MP-00037

Micanan Hand Crank for Gearhead Jackshafts PRO-GH PRO-GHC

  • Provides for hand crank operation in lieu of hand chain and pocket wheel
41D96-1

LiftMaster Light Lens for 8500

  • Also known as: 108D96-1 41D96-1 108D0096-1
MT22-MON-Y-RH

Miller Edge 4-Wire Monitored Pressure Sensitive Edge Yellow Sold per Foot

  • Electromechanical small profile edge for rolling steel foor applicaton. •Touch sensitive signaling allows for immediate stopping or reversing of motion. •The MT22 is completely flexible and will contour to curved surfaces. The MT22 also acts as weatherstrip. •Lead wire: 22 gauge universal •Sensitivity: nominal 6-8 PSI •2 wire NO configuration •Horizontal mount •ANSI/UL325 recognized component •One year warranty
WorksheetInstallation manualSell sheet
PRO-HHD-7553U-R

Micanan 3/4HP 575V 3P Heavy-Duty Jackshaft N1 Eyes Monitored ECB Right Hand

  • 3/4 HP575V 3PH Industrial Continuous Duty Jackshaft Operator Ideal for Sectional Doors Rolling Steel
  • Monitored logic board with integral 372Mhz radio receiver that can hold up to 20 transmitters (MK-00647/ MK-00653/ MK-00659) or 200 of the 1 channel hand held transmitters (MK-00660).
  • N-1 Through-beam (MK-00649) photocells included. Other options available.
  • 3-btn O/S/C (02-103) wall control station included
  • Adjustable Friction Clutch 5L320 drive belt
  • #50 Roller chain 18 tooth door sprocket included
    • .......more details
Installation manualSpecification sheet
34201

Doorlec V-belt Pulley MA20 2" x 5/8" bore

MOTOR274

Manaras Electric Motor 3/4HP 575V 3PH

  • This item is compatible with BRAKE011
28-30080

Truck Door 1" Horizontal Track 6" Radius for T-Style Std Doors 120" Curbside (RH)

  • Galvanized steel 14 gauge construction
  • For use with 1" diameter rollers
  • 6" radius for smooth door operation
  • Track coupler used for proper alignment at track joints
28-00114

Truck Door 1" Std Vert. Track and Angle Assbly J Style Roadside (LH) 120" Todco Style

  • For Todco style doors
  • Galvanized steel 14-gauge construction
  • Includes J-style channel mounting angle with track and operator bracket
  • Fits door sizes 101 - 114" high
  • Cross ref: T #49014-2 T #41034-2 & W #4045
41A3589-1

LiftMaster 8ft Belt Assembly for Models '93-2000

  • For use with LiftMaster belt drive models 1270 1280 1280R.
  • Full belt assembly
  • For use with Chamberlain belt drive models 8100 8200 and 9200.
  • For standard 8 foot high garage doors
  • T rail assemblies ONLY.
MGH-6115-ECB-RH

Manaras 1.5 HP 120V 1P Jackshaft with Elect. Circuit Board Right Hand

  • A very heavy-duty worm gear industrial operator designed for use on Industrial standard high and vertical lift sectional or rolling doors and grilles.
  • It incorporates a chain hoist for manual operation with a floor level engaging device with electrical cut-out
  • Electrically activated drum-band type solenoid brake
  • Full overload protection
Installation manualSell sheet
FRONTIDLER010

Manaras Front Idler Assembly #41

FRONTIDLER007

Manaras Front Idler Assembly #48 (#410)

10-1000-CUSTOM

Strip Curtain PVC Door Custom Made ** Price by Quote Only

SF600U-114

Spring Fitting 6" Pair for 1-1/4" Shaft

  • Universal thread and is available for 1" or 1.25" Bore - must specify when ordering.
  • Pair includes: (1) winding & (1) stationary.
  • Not single thread.
  • Winding bar hole 5/8"
CABLE_532SS5000

Cable 5/32" 7x19 5000' Stainless Steel ** Price on request

TRACK-SET-2LHR-R

2" Tracks Set 7'-0" Low Headroom 1-3/4" Door Clips for Wood Frame R12 Torsion Rear

  • Complete set - torsion rear
200BL-10

2" Light Brush Insert 10ft Long

  • Polypropylene bristles
  • Same as MS1703-120
K94-37236

LiftMaster Universal Solar Harness Kit

  • For 7 Ah and 33 Ah batteries
1058050002

Overhead Limit Cam Snap On for OHD Chain Model

  • For Overhead models #456 #551 #556 and the #65 series
  • Also called Limit Actuator
  • 105805-0002
R5221

Sheave Strap 4"

  • Sheave strap also known as fork only
BCH753L5-RH

LiftMaster Hoist Op. with Carwash Mod. 3/4 HP 208/230/460 VAC 3 Ph L5 Right Hand ***Replaced by CRBH753L5-RH

  • Industrial Duty Hoist Operator with Damp Environment modification
  • External brake included
  • Comes with CPS-UN4 photoeyes
Installation manualManuel d'installationSell sheetBrochure
LVB1020-11

Laminated Bumper Black 10" Projection Vertical Installation 20" x 11" Sold Individually

  • For use in low to medium traffic loading docks in factories and warehouses.
  • Can be used as rub rails at the sides of truck wells
  • Fabric reinforced rubber pads cut from recycled truck tires.
  • Rubber pads laminated between steel angles and secured with 3/4” rods
  • Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
  • Wall mounting hole size is 1” diameter.
    • .......more details
MK00552

Micanan Capacitor for 233-284 MFD with Resistor ** Replaced by MK00542

5001-10-BLACK

Residential Side & Top Weather-Strip 10' Long - Black

  • Painted aluminum retainer with flexible dual fin vinyl.
  • Residential use.
41D8181

LiftMaster Cover

GL-12-LED

Guide Lights for Loading Docks Amber LED 12-24VAC/DC 13.5" long Sold as a Pair *Discontinued*

  • LED lights offer long-lasting reliable high-visibility in all weather conditions including direct sunlight with low power consumption.
  • Robust housing resists impact and corrosion.
  • Slim discrete design ensures little risk of damage due to accidental impact.
  • Wide input voltage range of 12-24Vac/dc (control box available for alternate voltages).
  • Boards coated in water-resistant polymer for optimal protection from water and humidity.
  • 12 LEDs per guide light
    • .......more details
SF514U

Spring Fitting 5-1/4" Pair for 1" shaft

  • Universal thread for use in either LH or RH wound springs.
  • Pair includes: (1) winding & (1) stationary.
201-300-401-00

Equinoxe Long Range Transmitter O/C/S for 8-Doors 433 MHz Pre-2016

  • Open/Close/Stop remote for 8 doors
  • Range of approx. 1000ft
  • A heavy-duty remote for Industrial applications
  • Old generation- prior to 2016
Programming InstructionsInstructions de programmation
TS-15

Tarp Strap Bungee with Galv. S-Hooks 15"

  • Made of 100% natural rubber from Sri Lanka
  • Galvanived S-hooks
  • 15" safely stretches to 23"
K72-18615

LiftMaster Drive Shaft Kit

  • Kit includes: Disconnect Bushing Drive Shaft Pillow Block Bearing Sprocket Disconnect Spring Chain Disconnect Key E-Ring.
  • Works with SL595 SL590.
SETR2641AM2C

Erone 2-Channel Mini Transmitter Dark Red 433MHz

  • Heavy-duty construction
  • Elegant & easy to carry
  • Light grey and dark red base with dark red buttons
  • Unobstructed range: 656 ft (200m)
  • 60 x 36 x 16mm (2.35 x 1.4 x 0.6in)
  • Two lithium batteries (CR2016) included
    • .......more details
Wireless System Chart
VFD-MOD

Micanan Variable Speed Modification Up-Charge for VFD Operators

  • Variable Frequency Drive modification for commercial operators
  • Whenever the primary power is 575V must add MX00164 panel
5735.96

Whiting Bottom Seal Grey 96"

  • For Dry Freight and Truss Doors
2B737

LiftMaster Output Board EL25

  • Output board for models EL25 and EL2000 (041B0737)
NIR-HD

EMX Industries NIR Hood Cover Steel

  • The hood keeps rain and other debris from distorting or blocking the photo beam.
  • It also helps to keep the sun from glaring off the reflector and disturbing the beam's reflection.
  • Replaces the mounting bracket that comes with the sensor.
  • Comes with Hood two sets of nuts and bolts and a plug
029-98290-PRIMR

W-Style Replacement Door Primer Only Stainless Steel Package 029-98290

  • Replacement door size between 96-1/4" - 98" wide x 72-90" high
  • Primer only
  • Stainless steel package
124773

Roller 3" UHMW 7-1/4" Stem Rubber

  • 3" UHMW tire covered with rubber
  • 6202 sealed precision bearing
  • 7-1/4" zinc plated stem
  • Rating: 200lb load; 10000 cycles of a 12' door
  • Helps quiet the operation of jackshaft operators
15-50B24QGH

Sprocket 24 Teeth 1-1/4" Bore 1/4" Keyway

ME123-M-YEL-U

Miller Edge Yellow Universal 4-Wire Monitored 2" wide x 1-1/2" high Sold by the Foot

  • Electromechanical slide in edge for sectional doors and sliding gates.
  • Touch sensitive singaling allows for immediate stopping and reversing of motion
  • Temperature range: -30F to 155F
  • Lead wire: 22 gauge universal
  • Sensitivity: nominal 6-8 PSI
  • 2 wire NO configuration
    • .......more details
WorksheetInstallation manualSell sheet
BK020/PR

Commercial 2" Safety Bottom Bracket Sold as a Pair (L & R) *** No Longer Available

  • Maximum cable diameter: 3/16"
  • Maximum door weight: 1300 lbs Zinc
  • Plated Steel
  • Sold as a pair
1003-4-DF-200FT

Bottom U-Rubber 4" Dual Fin Black 200' Long

  • 200ft spool of vinyl insert.
  • Dual fin
22210

Push Button Station 3 Oval Buttons O/C/S Flush Mount ** discontinued. To Extent of Inventory

  • Three button wall station Open/Close/Stop
  • NO contacts on the Open and Close buttons
  • NC contact on the Stop button
  • Stainless steel surface plate
  • Flush mount
MGS20-B-2U-05

Miller Edge Sensing Edge Square Black 2-Wire Universal Outlet 5ft Long

  • Electromechanical edge for standard 2" round or square frame sliding sing and bi-part gates. •3-sided activation allows for immediate stopping or reversing of motion •Contours to round or square posts. •Temperature range: -30F to 155F •Lead wire: 18 gauge 2ft length •Sensitivity: nominal 6-8 PSI •2 wrie NO configuration •ANSI/UL325 recognized component •Cannot be bent •One year warranty
MGS20-B-2U-04

Miller Edge Sensing Edge Square Black 2-Wire Universal Outlet 4ft Long

  • Electromechanical edge for standard 2" round or square frame sliding sing and bi-part gates. •3-sided activation allows for immediate stopping or reversing of motion •Contours to round or square posts. •Temperature range: -30F to 155F •Lead wire: 18 gauge 2ft length •Sensitivity: nominal 6-8 PSI •2 wrie NO configuration •ANSI/UL325 recognized component •Cannot be bent •One year warranty
CABLE_1/4SS-500

Cable 1/4" 7x19 500' Stainless Steel

H105L5-RH

LiftMaster Ind. Duty Hoist Op. 1 HP 575 VAC 3 Ph Logic 5 Right Hand W/Brake

  • Includes CPS-U
  • H-style operators include a floor level chain hoist to ease manual operation in an emergency or power outage.
  • The operators are typically mounted to the wall when used with larger sectional overhead doors with vertical or high lift and mounted to the wall or the front of the hood when used with rolling doors and grilles.
  • H operators are attached to the door jackshaft to indirectly drive the door. Connectivity
  • MyQ® Technology enables you to securely monitor and control your facility operator and lights with your smartphone tablet or computer for greater peace of mind.
  • Alerts can be received as email or pop-up (push) notifications on a mobile device ensuring the status of your commercial door.
    • .......more details
Installation ManualManuel d'installationSell sheetBrochure
H101L5-RH

LiftMaster Ind. Duty Hoist Op. 1 HP 115/230 VAC Logic 5 Right Hand W/Brake ***No Longer Available

  • Includes CPS-U
  • H-style operators include a floor level chain hoist to ease manual operation in an emergency or power outage.
  • The operators are typically mounted to the wall when used with larger sectional overhead doors with vertical or high lift and mounted to the wall or the front of the hood when used with rolling doors and grilles.
  • H operators are attached to the door jackshaft to indirectly drive the door.
  • MyQ® Technology enables you to securely monitor and control your facility operator and lights with your smartphone tablet or computer for greater peace of mind.
  • Alerts can be received as email or pop-up (push) notifications on a mobile device ensuring the status of your commercial door.
    • .......more details
Installation ManualManuel d'installationSell sheetBrochure
EQ2722

SkyLink 3/4 HP Garage Door Opener with 2 2-Btn Keychain Remotes ** Discontinued

  • The DC motor offers additional benefits with very quiet operation and much less vibration.
  • It is ideal for garage doors that are below a living room or bedroom.
  • The DC motor also offers the soft start soft stop features which reduces the vibration and wear and tear of all the mechanical parts
  • Features: Rolling Code Technology Soft Start Soft Stop Optimal Force Learnings and Safety Beam Sensors.
  • Available in either Belt or Chain drive
  • Includes two 2-btn keychain remotes # MK318-2
    • .......more details
Installation ManualSell Sheet
DL91201

LiftMaster HID PROX 1346 ProxKey III *Discontinued Replaced by LMPK3-ST*

  • Pocket size key fob
  • Low cost entry level compatible with HID Prox Readers.
OPH-6112-ECB-LH

Manaras Opera-H 1/2HP 120V 1Ph with Electronic Circuit Board Left Hand

  • A heavy-duty industrial jackshaft operator.
  • For use on Standard High and Vertical Lift sectional doors.
  • Can also be used on Rolling doors or Grilles.
  • Comes with a self-engaging chain hoist for manual operation.
  • Clearence: side room required 15"
  • 25 cycles per hour 100 cycles per day
    • .......more details
Installation ManualSell Sheet
MA028

LiftMaster Padded Barrier Arm Yellow 14ft

  • For use on Mega-Arm gate operator
  • Requires adapter collars model MA031 - sold separately
Additional arm accessories
26CW94522

Truck Door Intermediate Panel (12" x 98") Painted White for Whiting Dryfreight

  • These panels are cut to an extra wide width to fit wider vehicle applications.
  • Interlocking tongue and groove design for weather-tight joint and proper panel alignment.
  • 3/4" thick 7 ply exterior grade medium density plywood.
  • Painted white
K23-19380-2

LiftMaster Reset Switch Kit for Miracle-One

  • Reset switch and Harness
18-MAG-STRAP

Magnetic Hinge Strap 18" Black Set of 4

  • Decorative hinge strap only.
  • Black flexible magnetic material with deep embossed design
5001-7-CHARCOAL

Residential Side & Top Weather-Strip 7' Long - Charcoal

  • Painted aluminum retainer with flexible dual fin vinyl.
  • Residential use.
  • Sold by full case quantity (20)
25-2006

LiftMaster 6 Amp Overload Fuse

  • For models: SL585-50-21 SL858-50-81 SL595-50-21 SL595-50-81 SL575-50-21 SL575-50-81
27-20114

Truck Door W-Style Spring Assembly Curbside RHW 35" Long

  • Wire thickness: .187
  • Assembled Spring length: 35 inches long
  • Inside diameter: 2 3/16"
  • Includes cable drum and bearing assembly winding cone wound onto spring for stronger design and internal spring spacer.
1003-3"-PER-FT

Bottom U-Rubber 3" Black Sold per Foot

10-1000-BAR

Strip Curtain Universal Mounting Bar Pre-Studded Angle Sold per foot

  • Includes: 1 cinch plate and 2 wing nuts which covers 6 of the pre-studded bolts at one time making installation and maintenance easy.
156871

Decorative Hinge Yorktown Style 16" Stamped Steel sold per piece

  • 16" hinge strap only
  • Black stamped steel
  • Mounting hardware sold separately
  • Sold per piece
27-48-300

Extension Spring 8' Door - 300 lbs Tan

  • Single - Loop
  • 27" long 48" stretch 300 lb load
  • Sold individually
  • Rated for 10000 cycles
Spec Sheet
OSH-6112-ECB-LH

Manaras Opera-SH 1/2HP 120V 1Ph with Electronic Circuit Board Left Hand

  • An ultra high-end heavy-duty V-belt drive industrial jackshaft operator
  • For use on Standard High and Vertical Lift sectional doors
  • Can also be used on Rolling doors and Grilles
  • Comes with a chain hoist for manual operation and a floor level engaging device
  • Clearence: side room required 16"
Installation ManualSell Sheet
Z9967

Roller Chain Puller *** To Extent of Inventory

  • Allows chain to be pulled together for attachment of the master link
  • For 35 thru 60 chain
MOTOR258-WIRED

Manaras Electric Motor TEFC 3/4HP 120/240V 1PH Wired

  • Electric motor comes pre-wired for a brake
  • Must specify if operator is equipped with electronic circuit board or if it is hard-wired
K-LA500

LiftMaster Primary Replacement Arm Service Kit for LA500 Original Arm ** DISCONTINUED

  • Replacement arm only - no stripes old style
MD00009

Micanan Roller Chain #41 45 Pitch Drive with Link

  • Length: 4 ft
SLT17-20P

Rolling Steel 2" Flat Slat 20-ga Primed

6X10PO50-RIGID

Devanco Loop 6' x 10' Rigid PVC pave-over 50' lead-in

  • Ideal for use on with gravel driveways or sufaces that are to be asphalted
  • Features a twisted lead-in to reduce the chances of interference and false detections.
  • Direct burial loops should be buried approximately 6" deep
Installation InstructionsInstructions d'installationSpec SheetBrochureLoop Placement GuideGuide de positionnement des boucles
PL-B12-ARM-CURV

Lynx Curved Arm for Proline Operator

  • Used on Proline residential garage door openers
MOD034

Manaras Monitored Photocell Upgrade N1 to N4

  • Ideal for industrial environments submersible and impact resistant.
  • Flexible design withstands and realigns after mechanical impact.
  • Max. range 45ft.
  • Incl. photoeyes 3ft of conductor wire and mounting hardware.
  • Applies to all operator models with electronic control "M" types.
.343-3-3/4-RH-C

Torsion Spring .343 x 3-3/4" x 144" RH Coated ** Price by Quote Only

  • Black Oxide coating
  • Wire size painted on spring
  • Wire size: .343 ID: 3-3/4" Length: 12 ft
.319-6-RH-C

Torsion Spring .319 x 6" x 144" RH Coated ** Price by Quote Only

  • Black Oxide coating
  • Wire size painted on spring
  • Wire size: .319 ID: 6" Length: 12 ft
.295-2-LH-C

Torsion Spring .295 x 2" x 144" LH Coated ** Price by Quote Only

  • Black Oxide coating
  • Wire size painted on spring
  • Wire size: .295 ID: 2" Length: 12 ft
029C98200

W-Style Complete Replacement Door White Stainless Steel Package 029C98200

  • Manufactured to exact size fully assembled tracking and spring assembly included.
  • 98" w x 100" h
  • Price varies according to size
PROBE-100

EMX CARSENSE-101 Direct Burial Probe with 100' Lead Wire

  • Wand only
  • Requires CS101 (Carsense-101)
K94-36591

LiftMaster Junction Box with Cable for LA500

  • Compatible with LiftMaster LA400 LA500 swing gate operators
  • Waterproof junction housing
  • Includes 40 ft. of insulated cable
  • Includes mounting hardware wing-nut/flange wall anchors
CH753L5-RH

LiftMaster Hoist Op. with Carwash Mod. 3/4 HP 208/230/460 VAC 3 Ph L5 Right Hand

  • Industrial Duty Hoist Operator with Damp Environment modification
  • Brake not included
  • Comes with CPS-UN4 photoeyes
Installation ManualManuel d'InstallationSell sheetBrochure
K33-51206-315

LiftMaster Radio Receiver Board Elite **DISCONTINUED

  • Fits the Miracle-One gate operator
Q300

LiftMaster Traveler Carriage for Miracle-One**Discontinued

  • Replacement traveler carriage for Liftmaster Elite Miracle-1 model
  • Same as part no. K75-50341
Q310

LiftMaster Surge Protection for MIR-1 ( K74-50271) ** DISCONTINUED

  • For the Miracle-One single arm gate operator
  • Same as part no. K74-50271
IRB-SP

EMX Industries Liquid Tight Strain Relief Connectors Sold as a Pair

BK301

Jamb bracket J-01 #1 12 gauge

  • Sold by the piece
  • Height 2.40" Length 1.9" Width 2.45"
  • Bright zinc plated 12 gauge steel
  • 2" long track mounting slot
  • manufactured to accept ¼” fasteners when attaching to the track and 5/16” to lag to the wall.
MGR20-Y-2U-06

Miller Edge Sensing Edge Round Yellow 2-Wire Universal Outlet 6ft Long

  • Electromechanical edge for standard 2" round or square frame sliding sing and bi-part gates. •3-sided activation allows for immediate stopping or reversing of motion •Contours to round or square posts. •Temperature range: -30F to 155F •Lead wire: 18 gauge 2ft length •Sensitivity: nominal 6-8 PSI •2 wrie NO configuration •ANSI/UL325 recognized component •Cannot be bent •One year warranty
Installation ManualSell Sheet
OGH-6534-ECB

Manaras 1 HP 600V 3Ph Gear Head Operator with Elect. Circuit Board

  • A heavy-duty worm gear industrial operator designed for use on industrial standard high and vertical lift sectional doors or rolling doors and grills.
  • Includes a self-engaging chain hoist for manual operation
  • 25 cycles per hour 80 cycles a day
  • Hoist on right side standard can easily be moved to the left in field
  • Full overload protection
  • BRACKET112 must be used for wall mounting
    • .......more details
Installation ManualSell Sheet
OGH-6234-ECB

Manaras 1 HP 208V 3Ph Gear Head Operator with Elect. Circuit Board

  • A heavy-duty worm gear industrial operator designed for use on industrial standard high and vertical lift sectional doors or rolling doors and grills.
  • Includes a self-engaging chain hoist for manual operation
  • 25 cycles per hour 80 cycles a day
  • Hoist on right side standard can easily be moved to the left in field
  • Full overload protection
  • BRACKET112 must be used for wall mounting
    • .......more details
Installation ManualSell Sheet
OGH-6114-ECB

Manaras 1 HP 120V 1Ph Gear Head Operator with Elect. Circuit Board

  • A heavy-duty worm gear industrial operator designed for use on industrial standard high and vertical lift sectional doors or rolling doors and grills.
  • Includes a self-engaging chain hoist for manual operation
  • 25 cycles per hour 80 cycles a day
  • Hoist on right side standard can easily be moved to the left in field
  • Full overload protection
  • BRACKET112 must be used for wall mounting
    • .......more details
Installation ManualSell Sheet
OGH-6112-ECB

Manaras 1/2 HP 120V 1Ph Gear Head Operator with Elect. Circuit Board

  • A heavy-duty worm gear industrial operator designed for use on industrial standard high and vertical lift sectional doors or rolling doors and grills.
  • Includes a self-engaging chain hoist for manual operation
  • 25 cycles per hour 80 cycles a day
  • Hoist on right side standard can easily be moved to the left in field
  • Full overload protection
  • BRACKET112 must be used for wall mounting
    • .......more details
Installation ManualSell Sheet
IRB-EXP

EMX Industries Explosion Proof Through-Beam Photocells 1162-1

  • Designed to operate in areas with explosive environments.
  • NEMA 4 and 7 housing
  • NEC Class I Groups B C & D Class II Groups E F & G CSA certified CENELEC certified EExd IIC.
  • Copper free Aluminum with Epoxy finish.
  • Potentiometer range adjustment to allow more precise tuning to site.
  • Through beam design is not affected by shiny surfaces.
    • .......more details
Installation ManualSell Sheet
AK-21W

Linear Exterior Digital Keypad *** No Longer Available

  • A digital keyless entry system designed for outdoor access control applications.
  • The keypad is housed in a rugged die-cast metal enclosure and is designed to be mounted in a standard single-gang electrical box.
  • The die-cast keys have bright easy-to-read yellow graphics.
  • Up to 480 entry codes from 1 to 6 digits in length can be programmed. They can activate either or both of the relay outputs.
  • Relay #1 has a 5 Amp capacity. Relay #2 has a 1 Amp capacity. The relays can be set for timed or latch-on/latch-off toggle operation per each individual entry code
Installation Manual
OTBH-6233-1-ECB

Manaras Trolley Operator 3/4 HP 208V 3 Ph with Electronic Circuit Board

  • Heavy-duty low headroom trolley operator designed for use on industrial standard lift sectional door
  • 25 cycles per hour 80 cycles per day
  • It incorporates a drum-band type solenoid brake.
  • Tracks are an extra 36 lbs per track
  • 3/4 HP & 1 HP operators come with #41 full roller chain
Installation ManualSell Sheet
OHJ-6213-ECB

Manaras Heavy-Duty Jackshaft Operator 3/4 HP 240V 1 Ph with Elect. Circuit Board

  • 25 cycles per hour 100 cycles per day
  • An Industrial duty operator featuring both the patented Hoist-a-Matic a self-engaging chain hoist for manual operation as well as a floor level disconnect
  • Specifically designed to motorize grills when a manual egress is required
  • Mechanical brake
  • Hoist on right standard
  • Full overload protection
    • .......more details
Installation ManualSell Sheet
OPH-6213-ECB

Manaras Opera-H 3/4HP 240V 1Ph with Electronic Circuit Board

  • A heavy-duty industrial jackshaft operator
  • For use on Standard High and Vertical Lift sectional doors
  • Can also be used on Rolling doors and Grilles
  • Comes with a self-engaging chain hoist for manual operation
  • Clearence: side room required 15"
Installation ManualSell Sheet
OPJ-6234-ECB

Manaras Heavy-Duty Jackshaft Operator 1 HP 208V 3 Ph with Elect Circuit Board

  • An industrial operator designed for use on standard high and vertical lift sectional doors
  • Can also be used on rolling doors and grills
  • It incorporates a floor level disconnect mechanism for manual operation
  • 25 cycles per hour 100 cycles per day
  • Continuous-duty single phase capacitor start or 3 phase motor open drip proof
  • Mechanical brake
    • .......more details
Installation ManualSell Sheet