Devanco Canada

 
User Name:
Password:
Remember Me:
Forgot your password
Request a Login

10-30701M

LiftMaster Chain Guide Tray for SL595

  • The tray located between the 2 chain guides.
  • Chain guides are not included.
27150A

Genie Chain Bullet

  • Compatible with: Genie – PMX60 PMX65 PMX80 PMX85 PMX300-IC/A & B IC250 IC250B PMX500-IC/A & IC/B ALC SERIES RCD SERIES
  • Overhead Door – 496 496CD (/A&B ) 696 (/A&B) 777 777CD
  • PASSPORT 286-386 286CD-386CD
  • Connects the two chain ends and also is the piece that the carriage engages
MI00002

Micanan Pulley 8" OD c/w Bushing 3/4" ID

75W-RS-BULB

Rough Service Bulb 75W ** Disc. to extent of inventory

82-NH25-03

LiftMaster Set Screw only

  • For 1/4-20-03
375UT

LiftMaster Universal 2-btn Transmitter Next Generation

  • Dual frequency universal transmitter
  • Will activate 2 different types of openers (1 on each button)
  • Compatible with major brands except Marantec & Hormann
  • Visor clip and battery CR2032 included
34538S.S

Genie Magnetic Close Down Limit Switch Assembly 138"

  • For Chain Glide models
OSH-6114-ECB

Manaras Opera-SH 1HP 120V 1Ph with Electronic Circuit Board

  • An ultra high-end heavy-duty V-belt drive industrial jackshaft operator
  • For use on Standard High and Vertical Lift sectional doors
  • Can also be used on Rolling doors and Grilles
  • Comes with a chain hoist for manual operation and a floor level engaging device
  • Clearence: side room required 16"
  • 25 cycles per day > 100 cycles per day
  • .......more details
MX00140-110-OLD

Micanan Brake Assembly for PRO-TB/APTB with 110V Solenoid Inside - Old Model

PRO-HB-7511R-LH

Micanan 3/4HP 115V 1P Hoist Operator with Brake and Mechanical Contactor Left Hand

  • Continuous duty belt drive jackshaft operator with emergency chain hoist
  • Includes solenoid brake
  • On-Board receiver holds up to 20 transmitters
CPE

Erone Proximity Card Standard *** To Extent of Inventory

  • Hexadecimal number printed on each badge
  • 8mm thick
.343-6-R

Cut-to-Length Torsion Spring .343 x 6" Right Hand Wound Blue/Red

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-600-INSTALLED
771

Fasteners Lag Screw Hex Washer High Profile 5/16" x 1-3/4" 1000/Box *** Discontinued

  • 7/16" head
763

Fasteners Flat Head Carriage Bolt 1/4-20 x 2-1/4" 1000/Box

  • Full length thread
  • Max torque = 6
790

Fasteners Hex Nut 3/8-16 1000/Box

23-2016

LiftMaster Limit Switch

  • Limit Switch for the VSL595
MV00292

Micanan Banner Photocell with Reflector

SSZP12-6

Solid Shaft 1" Keyed Zinc Plated 12'-6"

SSZP6-6

Solid Shaft 1" Keyed Zinc Plated 6'-6" ** to extent of inventory

K21-36793

LiftMaster Transformer 208-230/460 Volts 20Va

  • 230/460V PRIMARY 24V SECONDARY 20VA
71B240G

LiftMaster Brake Kit 230/240V with Solenoid Field Install SL585 and SL595

41D216

LiftMaster End Panel with all Labels and Light Socket

  • End panel that goes on model 8355
  • For the circuit board order 45ACT
41AC175-2

LiftMaster Electronic Circuit Board Assembly

  • For Sears / Craftsman garage door opener
3X6PO50

Devanco Loop 3' x 6' pave-over 50' lead-in

  • Ideal for use on with gravel driveways or surfaces that are to be asphalted
  • Features a twisted lead-in to reduce the chances of interference and false detections.
  • Direct burial loops should be buried approximately 6" deep
94-61180-33-84

Truck Door 2" Steel Roller 6" Stem for Whiting Roll-Up Doors

  • open-bearing roller
EL25S

LiftMaster Telephone Entry System Silver

  • Capable of accepting up to 2000 codes
  • 4 assignable and programmable built-in relays
  • Mounting versatility and available in 3 colors: Gray Nickel or Silver
M3-2314

Marantec 4-Button Transmitter 315 MHz 97244/122468

  • Same as part # 65893 and 97244
  • Visor mount
  • Includes battery CR2032
  • Made in Germany
10-30702

LiftMaster Chain Guard Top Cover Mfg Painted (K10-30702-2)

41A1037

LiftMaster Chassis Bracket

  • To correct higher level of noise than normal due to vibration from the powerhead.
  • Fits models 1355 3255 3270 3265-267 made between Jan-March 2014.
BK000-B

Residential Top Roller Bracket Adjustable 2-Bolt Sold per Piece

  • Sold per piece - not sold as a pair
  • Meant for 2" hardware
029-98290

W-Style Replacement Door White Stainless Steel Package 029-98290

  • Replacement door size between 96-1/4" - 98" wide x 72-90" high
  • Painted white
  • Stainless steel package
MK-00060

Micanan Timer Plug-In Type 0-10min 24V 8-Pin (MK00481)

TUBE_SHAFT_18FT

Hollow Shaft 1" x 18'-10" Galvanized 14 gauge

.262-2-L

Cut-to-Length Torsion Spring .262 x 2" Left Hand Wound Red/Yellow

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-200-INSTALLED
.207-2-L

Cut-to-Length Torsion Spring .207 x 2" Left Hand Wound Brown

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-200-INSTALLED
.250-134-R

Cut-to-Length Torsion Spring .250 x 1-3/4" Right Hand Wound Green

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-134-INSTALLED
MX00034-110V

Micanan Brake Assembly for PRO-HHD with 120V Solenoid (MX00206-110)

  • Complete brake assembly including 120V solenoid - solenoid cover sold separately part #MM00011
77810.0001

Overhead Door Box Assembly Cushion (#111389.0001.S) ** Price by quote only

  • Garage door operator bracket for older Overhead Door residential models (Automate 70 Touch n Go R-80 100 100SS 1000) and commercial garage door openers.
ME113-L

Miller Edge Black Left Hand Outlet 2-Wire 1-1/2" wide x 1-1/2" high Sold by the Foot

  • Slide in edge designed for commercial sectional doors
  • Retrofits easily to 1-1/4" to 1-1/2" sectional doors
  • Touch sensitive signaling allows for immedita stopping or reversing of motion
  • For a sectional door: measure the daylight opening of the door or measure the panel width of the door
  • This gives you the "active length" of the edge - the length to order.
  • Lead wire: 22 gauge universal
  • .......more details
.406_3-3/4"-LH

Torsion Spring .406 x 3-3/4" x 12ft LH Blue/Yellow

  • Wire size: .406
  • Inside diameter: 3-3/4"
  • Length: 12 ft
.375_3-3/4"-LH

Torsion Spring .375 x 3-3/4" x 12ft LH Yellow/Green

  • Wire size: .375
  • Inside diameter: 3-3/4"
  • Length: 12 ft
374LMC*

LiftMaster 4-btn Sec+ Transmitter 315 MHz - DISC

  • Compatible with wireless keypad model number 377LMC
  • Compatible with Liftmaster garage door opener model numbers 3595 3585 3575 3500 3280 3265 3220 3255 3245 3110 1356 1355 1346 1345 ATS2113X ATS2113X-CX HCT501130 LGO50113O LGO50113L LGO50113R LGO50113XR
  • This transmitter is replaced by 894LT
71-B120

LiftMaster Interior Mount Solenoid Brake 115V

24-24-1

LiftMaster Relay 24VAC 8-Pin DPDT Flange

4A1344

LiftMaster Light Socket Plastic (41C279)

CP-SW-TD6A

Lynx Switch Light Delay

  • For the old Lynx 455 operators
CAM011

Manaras Limit Cam

  • Limit cam for Mountshaft018A 018B
  • 2 cam's required per shaft
144C54

LiftMaster Idler Belt Pulley

  • Wide idler belt drive pulley
  • For square rail assemblies
.306_6"-RH

Torsion Spring .306 x 6" x 12ft RH Red

  • Wire size: .306
  • Inside diameter: 6"
  • Length: 12 ft
.393_3-3/4"-RH

Torsion Spring .393 x 3-3/4" x 12ft RH Orange

  • Wire size: .393
  • Inside diameter: 3-3/4"
  • Length: 12 ft
41A5281

LiftMaster Extension Brackets for Snappy Sensors

  • Brackets used with Snappy Sensors 41A5034
  • For use with with 41A5266-1
H14G05

Hinge #5 x 14 gauge

  • Bright zinc plated 14-gauge steel hinge
  • For use with 7/16" diameter stem rollers
  • Full body hinge 2-3/4" wide
  • #5 position
  • Use between sections 5 and 6
  • Same as part number 245
  • .......more details
SESMT03

Erone Wall Support for Transmitter

  • Wall support for one S2TR2641 transmitter
  • Color: Grey
  • Velcro and mounting hardware included
OPH-6532-ECB

Manaras Opera-H 1/2HP 600V 3Ph with Electronic Circuit Board

  • A heavy-duty industrial jackshaft operator.
  • For use on Standard High and Vertical Lift sectional doors.
  • Can also be used on Rolling doors or Grilles.
  • Comes with a self-engaging chain hoist for manual operation.
  • Clearence: side room required 15"
RADIO-16

Manaras MT2-1000 2-btn transmitter 313 MHz****Replaced by RADIO-EM903

  • Open/Close remote for 2 doors
  • Comes with LED battery life indicator
  • 9V battery included
  • Sunvisor clip included
7470.115

Whiting Side Seal for insulated doors 115" Long

  • Fits Coldsaver and Tempguard
2234.596

Whiting Coldsaver Bottom Panel 13-1/2" x Max 96" with lock seal and retainer ** Cut to Length

  • Fits Coldsaver Roll-Up Doors
  • 1-1/8" thick 96" wide
  • Includes Lock and keeper
109710

Linear 4-Channel Multi-Code Visor Transmitter 310 MHz

  • Open/Close remote for 4 doors
  • Compatible with 310 MHz Stanley and Multi-Code receivers
  • Supplied with visor clip
  • Easy access to battery and coding switches - 10 dip switches
  • Power: 9-volt battery
  • Codes: 512 per channel (set by dip switches)
  • .......more details
HAE00014

Linear Pulley and Bracket - Chain (HCT)

HAE00023

Linear 7ft Belt & Inner Slide Assembly (HBT7)

4009-6FT

Aluminum Retainer only for Light Brush 6' Long Reverse Angle

  • For reverse angle rolling steel doors.
  • For use with Light Brush or Vinyl Insert.
4001-12FT

Aluminum Retainer only for Light Brush 12' Long 45 degree

  • For angle application (45 degree)
  • For use with Light Brush or Vinyl Insert.
1003-1-3/8-12'

Aluminum Bottom Retainer L-Shaped

  • For 1-3/8" thick doors.
1104-18FT-DK-BN

Residential Side & Top PVC Weather-Strip with cap 18' Long - Commercial Brown (DN)

  • Commercial brown rigid vinyl retainer with commercial brown flexible vinyl seal.
  • Dual fin vinyl.
  • Comes with cap to hide screws.
  • Full case quantity only (12).
9001-24FT

Commercial Side & Top PVC Weather-Strip Clip-On 24' Long

  • Grey rigid vinyl retianer with black flexible vinyl.
  • Reverse angle clip-on vinyl retainer.
  • Clips onto side of rolling steel door.
  • Clips overtop of 1/4" angle.
32-48-200

Extension Spring 8' Door - 200 lbs Tan ** Replaced by 27-48-200

  • Double - Loop
  • 32" long 48" stretch 200 lb load
  • Springs sold individually
25-42-240

Extension Spring 7' Door - 240 lbs Blue w/ clip

  • Double - Loop end for strength
  • 25" long 42" stretch 240 lb load
  • Sold individually
  • Rated for 10000 cycles
26-94323

Truck Door Bottom Panel with Seal (13" x 98") for Whiting Dryfreight

  • These panels are cut to an extra wide width to fit wider vehicle applications.
  • Interlocking tongue and groove design for weather-tight joint and proper panel alignment.
  • These panels have no routs and shipped without holes.
  • 3/4" thick 7 ply exterior grade medium density plywood. Primer Finish
  • Comes only with bottom retainer and seal (installed)
26-94321

Truck Door Bottom Panel with Seal (11" x 98") for Whiting Dryfreight

  • These panels are cut to an extra wide width to fit wider vehicle applications.
  • Interlocking tongue and groove design for weather-tight joint and proper panel alignment.
  • These panels have no routs and shipped without holes.
  • 3/4" thick 7 ply exterior grade medium density plywood. Primer Finish
  • Comes only with bottom retainer and seal (installed)
903024ORBG

Operator Reinforced Bracket 24" Galvanized

  • Comes with clevis & clip pins. 12 per carton.
HD3080

Step Lift Plate Curled

  • Step Plate/Lift Handle
4X10PO50

Devanco Loop 4' x 10' pave-over 50' lead-in

  • Ideal for use on with gravel driveways or surfaces that are to be asphalted
  • Features a twisted lead-in to reduce the chances of interference and false detections.
  • Direct burial loops should be buried approximately 6" deep
STRUT-2-1/4-9'

Door Strut 2-1/4" Hemmed 9 ft Long

  • Reinforcement bar 2-1/4"
  • Electro-Galvanized
  • 22-GA
BK002

Residential Top Bracket Low Headroom Sold Individually

  • Bright zinc plated 10-gauge steel
  • 3/8" roller offset
MP00054

Micanan Track and #410 (#48) Chain for 8' h Door *Actual length 126"*

  • For 1/3 & 1/2 HP Micanan trolley operators
TAC1

LiftMaster Single Line Telephone Access Control with Radio

  • The TAC1 can be connected to two devices such as a door or gate using the two independently controlled relays or wirelessly using Security+ technology standard or any combination of the two.
  • Provides wired communication and secure access control at the gate or door.
  • Measurements: 6" h x 8.75" w
MT22-YELLOW-RH

Miller Edge 2-Wire Pressure Sensitive Edge Sold per Foot

  • €¢Electromechanical small profile edge for rolling steel foor applicaton. •Touch sensitive signaling allows for immediate stopping or reversing of motion. •The MT22 is completely flexible and will contour to curved surfaces. The MT22 also acts as weatherstrip. •Lead wire: 22 gauge universal •Sensitivity: nominal 6-8 PSI •2 wire NO configuration •Horizontal mount •ANSI/UL325 recognized component •One year warranty
.225-258-R-C

Cut-to-Length Torsion Spring .225 x 2-5/8" Right Hand Wound Coated ** Price by Quote Only

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-258-INSTALLED
7001-8-BLACK

Commercial Side & Top Weather-Strip 8' Long - Black (Code B)

  • Black galvanized steel with black dual fin vinyl.
  • Commercial and Residential use.
  • Steel is notched on both ends for easier installation.
5001-8-DK-BROWN

Residential Side & Top Weather-Strip 8' Long Commercial Brown

  • Painted aluminum retainer with flexible dual fin vinyl.
  • Residential use.
17-2001

LiftMaster Pulley 8" x 5/8" 4L Belt (K17-2001)

  • Same as K172001
MK-00157

Micanan Intrinsically Safe Modification (Safepack)

  • Modification available for add-on to certain models only
41A6298

LiftMaster Hardware Installation Bag for 3800

AELD

LiftMaster Elite Plug-In Loop Detector

  • For use with Omni Control board available on the Chamberlain commercial line.
41B4103

LiftMaster Service Belt Tensioner

27-20306

Truck Door Balancer Bracket Clamp for Whiting Roll-Up Doors

  • Steel construction
  • Plain finish
  • Clamp includes nuts
  • Cross Reference: W #2526 for both #2376 & #7176 balancers
SLT-TT

Rolling Steel Thermotite Slat Foam Injected

029C98200-PRIMR

W-Style Complete Repl. Door Primer only

  • Primer only no stainless steel package.
  • For doors upto 98" wide x 100" h
  • Fully assembled door manufactured to exact size with all tracking and spring operator assembly
  • Price varies according to size
MSJ-6534-M-N1-RH

Manaras MSJ 1 HP 600V 3Ph Monitored Board w/N1 Eyes RH

  • An ultra high-end heavy-duty V-belt drive industrial jackshaft operator
  • For use on Standard High and Vertical Lift sectional doors
  • Can also be used on Rolling doors and Grilles
  • Comes with a chain hoist for manual operation and a floor level engaging device
  • Clearence: side room required 16"
  • 35 cycles per day > 150 cycles per day
  • .......more details
TUBE_SHAFT_9FT

Hollow Shaft 1" x 9'-10" Galvanized 16 gauge

32-48-130

Extension Spring 8' Door - 130 lbs Yellow ** Replaced by 27-48-130

  • Double - Loop
  • 32" long 48" stretch 130 lb load
  • Springs sold individually
TXTA-200

Pulse 3-BTN Transmitter 315MHZ

  • Three-Button Transmitter: Can be programmed to operate with up to three different receivers to operate up to three doors or for Open Close and/or Stop functions
  • 315mHz: Works with RXTA-100 and RXTA-200 or as replacement unit for other LM receivers with 315MHz frequency.
  • Provided with visor clip for forklifts and trucks.
  • FCC Approved
SA1929/A18

Automatic Systems Feig Double Channel Loop Detector BL229

  • For AS1620 BL229
BCSI-PM206

Pivin Drapeau Traction Chain #50 BCSI Gate Operator Sold per Foot ** Price by Quote Only

2300L

LiftMaster Builder Series Chain Drive DC Motor Wi-Fi Battery Backup

EIM-101

Miller Edge Electronic Interface Module w/Junction Box (JB-02P-W)

  • Designed for use with pre-UL325-2010 commercial door operators and Miller Edge CPT sensing edges.
  • It's a durable weather-resistant solution housed in a NEMA 4-rated junction box.
  • This module is particularly suited for overhead doors using retracting reels or coil cords
31120-112-3/8

Doorlec Sprocket 50B36 1-1/2" Bore 3/8" KW

  • 36 tooth sprocket
MG123-BLACK-NM-U

Miller Edge Black Non-Monitored Universal Outlet 2 -Wire 2" wide x 1-1/2" high Sold by the Foot

  • The MG123 sensing edge is identical to the ME123 in shape and dimensions
  • The only difference is the rubber compound softer which makes it a bit more sensitive than ME123 (4-7 lbf vs 6-11 lbf).
  • Easy to install
  • Optimum size for 2 inch gate surfaces
  • Double-T design for added stability
  • Mounts vertically or horizontally
  • .......more details
.192-2-3/16-72-RH

Spring Wire .192 x 2-3/16" x 72" RHW Galvanized

  • .192 x 2.188" x 6'
WHITING-RV

Whiting Stainless Steel Rivet Option for Dry Freight Door

  • Upgrade option