Devanco Canada

 
User Name:
Password:
Remember Me:
Forgot your password
Request a Login
Home
STAR450-315

LiftMaster Commercial Access Control Receiver 315MHz *** Discontinued

  • Rapid learn feature programs multiple transmitters in just seconds
  • Ideal for gated communities parking lotsand garages.
  • Works on a tri-band frequency
Programming InstructionsSell sheet
655202

LiftMaster Pneumatic 14' Sensing Edge with 2-Wire Take-Up Reel

41D1739-1

LiftMaster Motor & Travel Module (041-0236-000)

  • For model: 8550
  • Also known as: 41D8006-1 41D1739-1 41D1624-1 041D1624-1 41-0236-000
AC7

Felco C7 Cable Cutter 3/16" Capacity

  • Tool length: 8"
  • Gives a clean cut without crushing thanks to the triangular cutting system.
  • Blades and centre bolt in high-quality hardened steel for exceptional performance.
  • Thumb catch designed for one-handed operation.
  • Pressed steel handles with non-slip grips
  • Maximum cutting diameter: 7mm / 0.28in
    • .......more details
Data sheet
GREASE

Gear and Rail Grease 3/4 oz Tube *** No Longer Available

  • A low temperature lithium based grease
  • To avoid tooth wear premature failure and temperature rise caused by friction by promoting sliding between teeth
12FT-I-BEAM

LiftMaster 12' I-Beam Rail G3712RV / CD1012

NX21

Allen Bradley 24V Reversing Contactor

  • Allen Bradley no. 104-C16KJH22-X6
  • Cat no. 100-C16*10
7FT-I-BEAM

LiftMaster 7' I-Beam Rail 3707CH Colour Code: Yellow

  • I-Beam Chain Drive Rail for model 3595
7FT-RAIL-BELT

LiftMaster 7' belt drive rail 2777BD - colour code: Grey

  • Price reflects cost if purchased with an opener
ME123-BLK-U

Miller Edge Black Universal Outlet 2 -Wire 2" wide x 1-1/2" high Sold by the Foot

  • Electromechanical slide in edge for sectional doors and sliding gates.
  • Touch sensitive singaling allows for immediate stopping and reversing of motion
  • Temperature range: -30F to 155F
  • Lead wire: 22 gauge universal
  • Sensitivity: nominal 6-8 PSI
  • 2 wire NO configuration
    • .......more details
Installation ManualWorksheetSell Sheet
ME113-R

Miller Edge Black Right Hand Outlet 2-Wire 1-1/2" wide x 1-1/2" high Sold by the Foot

  • Slide in edge designed for commercial sectional doors
  • Retrofits easily to 1-1/4" to 1-1/2" sectional doors
  • Touch sensitive signaling allows for immedita stopping or reversing of motion
  • For a sectional door: measure the daylight opening of the door or measure the panel width of the door
  • This gives you the "active length" of the edge - the length to order.
  • Lead wire: 22 gauge universal
    • .......more details
Installation ManualWorksheetSell Sheet
.343_5-1/4"-LH

Torsion Spring .343 x 5-1/4" x 12ft LH Blue/Red

  • Wire size: .343
  • Inside diameter: 5-1/4"
  • Length: 12 ft
.295_2"-LH

Torsion Spring .295 x 2" x 12ft LH Blue

  • Wire size: .295
  • Inside diameter: 2"
  • Length: 12 ft
71-B120

LiftMaster Interior Mount Solenoid Brake 115V

Instruction Manual
30B532

LiftMaster Capacitor 53uF-64uF 220V

  • For 1/2 HP models
  • Dimensions: 1-5/16" diameter x 4-3/16" long (including the terminals)
K001A6837

LiftMaster Replacement Logic 4 Circuit Board L4

  • iftMaster replacement logic board (L4) kit for Commercial operators L4 board is UL325 compliant & requires CSPU photoeyes for momentary contact operation
  • Works with LiftMaster operators of all voltages and HP
  • Maintenance Alert System (MAS)
  • Open Mid Stop feature
  • Timer-to-close mode
  • Car dealer mode
    • .......more details
R-831-P

FL-Allstar 1-Door O/C/S Receiver 107480-311 MHz***NLA

  • This receiver comes in a metal enclosure.
  • It has three isolated contacts to open close or stop the door. If your operator can be controlled by three button station then our R-831-P receiver and commercial remote controls will work with your operator.
  • Manufacturer's model number: 190-107480
  • Dimensions: 9 1/4" x 6 7/8" x 1 1/4".
Programming Instructions - Dip Switch VersionProgramming Instructions - Learn Button Version
41K4629

LiftMaster CPS Interface Black Box (CPICARD)

  • Allows CPS-U photoeyes to provide a 'NO' contact
  • Interface is included with CPS & CPS-N4
  • Also known as 041K4629 1C4489 41K4629 41C4489 CPI
.363_5-1/4"-RH

Torsion Spring .363 x 5-1/4" x 12ft RH Green/White

  • Wire size: .363
  • Inside diameter: 5-1/4"
  • Length: 12 ft
.283_1-3/4"-RH

Torsion Spring .283 x 1-3/4" x 12ft RH White

  • Wire size: .283
  • Inside diameter: 1-3/4"
  • Length: 12 ft
17300

Doorlec DC-3000T3 3-btn Transmitter 313 MHz

  • One block of 10 dip-switches for programming
  • Will activate 3 Doorlec 17307 receivers (DC-3000R)
  • Includes visor clip and 9V battery
Programming Instructions
LYNX-RCVR-OCS

Lynx O/C/S Receiver

  • For use with Lynx o/c/s transmitter # T3B-OCS
Compatibility chart
T3B-DS

Lynx 3-btn Transmitter Dip Switch 303 MHz

  • Ultra secure mid-size transmitter with 8 dip-switches for coding
  • 3-buttons provides control for 3 Lynx operators
  • Compatible with HomeLink in-vehicle remote control
  • Can be mounted on visor with saddle clip or carried on a keychain
  • Visor clip and 12V battery included
  • Will work with Lynx residential operators built from 2000 and up.
    • .......more details
Compatibility chart
CP-CRG-NEW

Lynx Auto Re-Connect Carriage 14-1/2" Arm Sold Separately

  • Will work on most brands of commercial trolley operators using 2" angle tracks.
SEA433

Erone Tuned Antenna 433MHz

  • Increase reception and/or range
  • 11.5ft (3.5m) coaxial cable (RG 58) included
  • L-Shaped bracket for wall-mounting
Wireless System Chart
14FT-TROLLEY-SET

LiftMaster 14ft Double Angle Rail Set for Comm. Trolley Ops 10-5814-P (2 pcs) *Actual length 203"*

  • Double Angle Rails for doors up to 14' high
  • Works with models : MT T GT APT
  • Indicated selling price is calculated with the purchase of a commercial operator. For pricing on a double angle rail only please contact us
  • Actual Length 16' 11"
LIMIT018

Manaras Double Limit Switch without Lever

  • Double limit switch (DPDT) - Cherry
  • The extra contact is used to control auxiliary equipment
  • Applies to all current operators
Limit Switch Chart
BRAKEPART018

Manaras Brake Shoe Assembly Kit

  • Kit includes SHOE001 & SHOE002 for old brake system.
  • Fits all Manaras operators except gear head made prior to 1999.
Drawing
RADIO-14

Manaras MR-1000 1-Channel 24V Receiver 313 MHz ** Replaced by RADIO-RE900

  • Controls one operator with MT series transmitters.
  • Operates on 24VAC.
  • A LED indicates that the unit has been activated.
  • Can be installed directly onto the control box of a Manaras operator.
Installation Instructions
RADIO-15

Manaras MRX-1000 1-Channel 24V Receiver with Commercial Antenna 313 MHz ** To extent of inventory

  • Controls one operator with MT series transmitters.
  • Operates on 24VAC.
  • A LED indicates that the unit has been activated.
  • Can be installed directly onto the control box of a Manaras operator.
  • Includes a commercial receiver antenna for increased range.
  • Will be replaced by RADIO-RE901A
    • .......more details
Installation Instructions
7145.96

Whiting Bottom Seal For Coldsaver 96" long

  • Aluminum retainer sold separately
2234.596

Whiting Coldsaver Bottom Panel 13-1/2" x Max 96" with lock seal and retainer ** Cut to Length

  • Fits Coldsaver Roll-Up Doors
  • 1-1/8" thick 96" wide
  • Includes Lock and keeper
308913

Linear 1-Channel Multi-Code Visor Transmitter 310 MHz

  • Open/Close remote for 1 door
  • Compatible with 310 MHz Stanley and Multi-Code receivers
  • Supplied with visor clip
  • Easy access to battery and coding switches - 10 dip switches
  • Power: 9-volt battery
  • Codes: 1024 (set by dip switches)
    • .......more details
Programming Instructions
9931T

Allstar 1-btn Transmitter 108787 318 MHz ***Replaced by P-9931T

  • Compatible with Allstar and MVP receivers
  • Visor mounting clip supplied
  • Power: 9-volt battery
  • Codes: 19683 (set by nine trinary dip switches)
  • RF frequency: 318 MHz
  • Dimensions: 2.25" W x 4.625" H x 1" D Order number: 190-108787
    • .......more details
Programming Instructions
111645

Allstar MVP 1-Channel 4-Wire Gate Receiver 318 MHz ***Replaced by P-9931R-4F

  • One channel
  • 4-wire operator connection
  • Wire whip antenna with "F" connector
  • Compatible with Allstar Classic Allister and Pulsar dipswitch transmitters and MVP quik-code transmitters
  • Power: 24 VAC/VDC
  • Codes: 19683
    • .......more details
Programming Instructions
MVP-WKE

Allstar Wireless Keypad 110927 318 MHz *** NLA

  • Compatible with all MVP receivers and operators
  • 4-digit access code
  • Backlit keys
  • Operate LED
  • Power: 9-volt battery
  • Codes: 19683
    • .......more details
Programming Instructions
HAE00004

Linear Limit Switch Assembly

  • For LSO LDO LCO
5600.3

Whiting Truck Door Stainless Steel Bottom Roller Bracket Assy Complete

3002-200FT

Gum Hose 1/2" ID 200' Spool

  • 1/2" inside diameter
  • Installed in bottom "U" rubber for use as a safety edge
4010-6FT

Aluminum Retainer only for Light Brush 6' Long 180 degree

  • For angle application (180 degree)
  • For use with Light Brush or Vinyl Insert
4002-12FT

45 Degree Aluminum Retainer for Light Brush 12' Long 45 degree

  • For angle application (45 degree)
  • For use with Light Brush or Vinyl Insert.
1003-4"-YELLOW

Bottom U-Rubber 4" Yellow 200' Long

  • 4" yellow vinyl insert 200ft spool.
371LMC

LiftMaster 1-btn Security+ Transmitter 315MHz

  • Visor clip and 3V lithium button cell (CR2032) battery included.
371LMC Manual
TC1

Tri-Code Transmitter 1-btn Visor - DISCONTINUED

  • 10 dipswitch format 3-position slide switch
  • Compatible with Multi-Code 300 & 310 MHz Delta3 & Stanley 310 MHz
  • Discontinued 7/1/13
375LMC Programming InstructionsInstructions de programmation pour 375LMC
BLOCK-BLUE

Spring Repair Blocks .2187-.3065 Pair

  • For the temporary repair of a broken spring.
  • Wire size: .2187 - .3065
1104-9FT-SAND

Residential Side & Top PVC Weather-Strip with cap 9' Long - Sandstone (D)

  • Sandstone rigid vinyl retainer with sandstone flexible vinyl seal.
  • Dual fin vinyl.
  • Comes with cap to hide screws.
  • Also known as Taupe
7001-14-WHITE

Commercial Side & Top Weather-Strip 14' Long - White (W)

  • White galvanized steel with white dual fin vinyl.
  • Commercial and Residential use.
  • Steel is notched on both ends for easier installation.
7001-12-WHITE

Commercial Side & Top Weather-Strip 12' Long - White (W)

  • White galvanized steel with white dual fin vinyl.
  • Commercial and Residential use.
  • Steel is notched on both ends for easier installation.
7001-7-WHITE

Commercial Side & Top Weather-Strip 7' Long - White 7001-WW (W)

  • White galvanized steel with white dual fin vinyl.
  • Commercial and Residential use.
  • Steel is notched on both ends for easier installation.
7001-8-WHITE

Commercial Side & Top Weather-Strip 8' Long - White (W)

  • White galvanized steel with white dual fin vinyl.
  • Commercial and Residential use.
  • Steel is notched on both ends for easier installation.
25-42-300

Extension Spring 7' Door - 300 lbs Tan w/ clip

  • Double - Loop
  • 25" long 42" stretch 300 lb load
  • Sold individually
  • Rated for 10000 cycles
Spec Sheet
25-42-200

Extension Spring 7' Door - 200 lbs Tan

  • Double - Loop
  • 25" long 42" stretch 200 lb load
  • Sold individually
  • Rated for 10000 cycles
  • Same as part number 120
Spec Sheet
25-42-220

Extension Spring 7' Door - 220 lbs Green w/ clip

  • Double - Loop
  • 25" long 42" stretch 220 lb load
  • Sold individually
  • Rated for 10000 cycles
Spec Sheet
25-42-110

Extension Spring 7' Door - 110 lbs White

  • Double - Loop
  • 25" long 42" stretch 110 lb load
  • Sold individually
  • Rated for 10000 cycles
Spec Sheet
27-20306

Truck Door Balancer Bracket Clamp for Whiting Roll-Up Doors

  • Steel construction
  • Plain finish
  • Clamp includes nuts
  • Cross Reference: W #2526 for both #2376 & #7176 balancers
27-20202

Truck Door Winding Cone for Dual Spring Assembly for Whiting Roll-Up Doors (2-3/16")

  • Zinc die cast construction.
  • Universal design that will work for both Curbside (RH) and Roadside (LH) wound springs.
  • Cross Reference: W #2518
  • 2-3/16" I.D.
R5999

Shaft Collar 1" with 1 Set Screw

  • Set Screw: 5/16 x 18
H11G04

Hinge #4 x 11 gauge

  • 11 gauge # 4 hinge - 0.72 lbs
  • Bright zinc-plated steel construction
  • For use with 7/16" stem rollers
CB5320500

Cable 5/32" 7x19 500' Galvanized

  • Galvanized cable 5/32" 7x19 500ft spool.
  • Cable break strength: 2800 lbs
Comparison charts
RS1039

Roller 3" Steel 9" stem 10 ball - To Extent of Inventory. Replaced by RS1039-C

  • Steel Roller Wheel diameter: 3"
  • Working length: 8.5"
  • Overall length: 9.64"
  • Box qty: 60 Box weight: 49.6 lbs (3-9-10 Steel)
S-HOOK_SMALL

S Hook #8 Small 1/8" x 1-3/8"

41A5034

LiftMaster Snappy Beam Sensors ** DISCONTINUED USE 041-0136

  • Will work on all LiftMaster residential openers equipped with safety beams
  • For newer models 1999-current will fit on existing brackets
  • For older models 1993-1999 new brackets #41A5266-1 are required or use old style safety beams #41A4373A
  • New Gen ( 2021+) operators will have new snappy beam sensors part number 041-0136
  • Not compatible with the New Gen (2021+) 041-0155 snappy beam brackets
25-10113**DISC

Truck Door 2" Steel Roller Long Stem for Whiting Roll-Up Doors Use Part # 94-61180-33-84

  • Unplated shaft 10 roller ball design
  • Shaft Length: 6.5" Overall Length: 7.5"
  • Long stem roller has a staked collar design versus machined collar on others.
4X10PO50

Devanco Loop 4' x 10' pave-over 50' lead-in

  • Ideal for use on with gravel driveways or surfaces that are to be asphalted
  • Features a twisted lead-in to reduce the chances of interference and false detections.
  • Direct burial loops should be buried approximately 6" deep
Installation InstructionsInstructions d'installationSpec SheetBrochureLoop Placement GuideGuide de positionnement des boucles
6X10PO50

Devanco Loop 6' x 10' pave-over 50' lead-in

  • Ideal for use on with gravel driveways or sufaces that are to be asphalted
  • Features a twisted lead-in to reduce the chances of interference and false detections.
  • Direct burial loops should be buried approximately 6" deep
Installation InstructionsInstructions d'installationSpec SheetBrochureLoop Placement GuideGuide de positionnement des boucles
4X8PO50

Devanco Loop 4' x 8' pave-over 50' lead-in

  • Ideal for use on with gravel driveways or surfaces that are to be asphalted
  • Features a twisted lead-in to reduce the chances of interference and false detections.
  • Direct burial loops should be buried approximately 6" deep
Installation InstructionsInstructions d'installationSpec SheetBrochureLoop Placement GuideGuide de positionnement des boucles
CADROLL

3" Stainless Steel Carwash Roller 7" Stem ** To Extent of Inventory

  • Stainless Steel Shaft no bearing design
  • Roller made from NMW plastic which is more wear resistant that steel because it causes less friction
  • Rated for 200 000 cycles
  • Pound Load: 145 lbs
.234_1-3/4"-LH

Torsion Spring .234 x 1-3/4" x 12ft LH Blue/White

  • Wire size: .234
  • Inside diameter: 1-3/4"
  • Length: 12 ft
1104-18FT-BROWN

Residential Side & Top PVC Weather-Strip with cap 18' Long - Brown (N)

  • Brown rigid vinyl retainer with brown flexible vinyl seal.
  • Dual fin vinyl.
  • Comes with cap to hide screws.
  • Full case quantity only (12).
WB-300

Skylink Multi-Function Wall Console ***For Old EQ Models

  • For use with the Skylink garage door openers.
  • Oversized Push Button for activating the garage door opener.
  • Activate opener light on/off and the light will remain on until the button is pressed again.
  • Feature with Lock function to ignore all radio signals for added security.
  • Illuminated LED indication.
  • Easy to Install.
    • .......more details
MOUNTSHAFT001

Manaras Clutch Shaft Kit for MJH (pre-1998)

  • Input / clutch shaft kit for MJH models up to mid-1998
  • Kit includes V-belt 4L360 to fit with newer deeper pulley
  • For MJH built after 1999 use MOUNTSHAFT001A
Drawing
4X3PO50

Devanco Loop 4' x 3' pave-over 50' lead-in

  • Ideal for use on with gravel driveways or surfaces that are to be asphalted
  • Features a twisted lead-in to reduce the chances of interference and false detections.
  • Direct burial loops should be buried approximately 6" deep
Installation InstructionsInstructions d'installationSpec SheetBrochureLoop Placement GuideGuide de positionnement des boucles
8030196

Marantec Belt Connector Kit

  • Works for all Marantec Belt Drive Openers
  • For models: Mac Lift M4500M4700Q7500Q7700 M4500e M4700e
  • Includes two connector pieces and four screws
  • Not for use on the heavy duty rails used by Q7900 & M4900e
OGH-6112-ECB

Manaras 1/2 HP 120V 1Ph Gear Head Operator with Elect. Circuit Board

  • A heavy-duty worm gear industrial operator designed for use on industrial standard high and vertical lift sectional doors or rolling doors and grills.
  • Includes a self-engaging chain hoist for manual operation
  • 25 cycles per hour 80 cycles a day
  • Hoist on right side standard can easily be moved to the left in field
  • Full overload protection
  • BRACKET112 must be used for wall mounting
    • .......more details
Installation ManualSell Sheet
ME123-YELLOW-LH

Miller Edge Yellow Left Hand Outlet 2-Wire 2" wide x 1-1/2" high Sold by the Foot

  • Electromechanical slide in edge for sectional doors and sliding gates.
  • Touch sensitive singaling allows for immediate stopping and reversing of motion
  • Temperature range: -30F to 155F
  • Lead wire: 22 gauge universal
  • Sensitivity: nominal 6-8 PSI
  • 2 wire NO configuration
    • .......more details
Installation ManualWorksheetSell Sheet
1104-ASFT-16FT

Elton Aluminum Stiffener for 1104 16ft

  • Prevents the 1104 from buckling in the hot sun
GALV-406-6-R

Cut-to-Length Torsion Spring .406 x 6" Right Hand Wound Galvanized Blue/Yellow Price per Inch

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-600-INSTALLED
  • Galvanized
ME120-C

Miller Edge Aluminum Mounting Channel Sold per Foot

  • 1-1/16" Wide 9/16" High
H14G03

Hinge #3 x 14 gauge

  • Bright zinc plated 14-gauge steel hinge
  • For use with 7/16" diameter stem rollers
  • Full body hinge 2-3/4" wide
  • #3 position
  • Use between sections 3 and 4
  • Same as part number 243
    • .......more details
5001-14-BLACK

Residential Side & Top Weather-Strip 14' Long - Black

  • PVC wrapped
  • Painted aluminum retainer
  • Dual fin vinyl
41D8859

LiftMaster Cover 8550WL WLED

  • Burgundy Replacement Cover.
  • This one piece cover is compatible with various LiftMaster® Lock Capable Garage Door Openers Powered by myQ®; manufactured after 2017
15-50B12LGH

Sprocket 12 Teeth 1" Bore 1/4" Keyway

  • Same as 50B12x1
25-10402

Truck Door Pull Strap (15.5") with Zinc Retainer for Roll-Up Doors

  • Durable 2" wide black nylon construction for added strength and durability.
  • Custom lengths available
  • Cross Reference: 257000
BOARD075M

Manaras Replacement Board Kit (Monitoring)

  • Includes BOARD70MR and BOARD66R
  • On-board 390MHz radio receiver accepts 50 remote controls
36179R

Genie Traveler Assembly for Screw Drive

  • Fits model 3060 L/M
  • Replaces: 25589R 25589S 25589C 20414R 34107R 20073R & 24357R
1003-1-5/8-10'

Aluminum Bottom Retainer L-Shaped

  • For 1-5/8" thick doors.
MT22-YELLOW-LH

Miller Edge 2-Wire Pressure Sensitive Edge Sold per Foot

  • €¢Electromechanical small profile edge for rolling steel foor applicaton. •Touch sensitive signaling allows for immediate stopping or reversing of motion. •The MT22 is completely flexible and will contour to curved surfaces. The MT22 also acts as weatherstrip. •Lead wire: 22 gauge universal •Sensitivity: nominal 6-8 PSI •2 wire NO configuration •Horizontal mount •ANSI/UL325 recognized component •One year warranty
Installation ManualWorksheetSell Sheet
1222_DUAL_TROLLEY_14'

LiftMaster Dual Trolley kit for 14' high door includes #41 Chain for 14ft High Door Angle tracks (2x) 14' (Actual length 227") and (1x) shaft

  • Provides a second drawbar-type operation on wide standard door
  • Includes 14ft tracks #41 chain hardware & Round Bar 1" x 20'
  • Works with TDC12 & TDC22 Maxum operators
K10-10371

LiftMaster Straight Door Arm

  • Also known as: 105368 10-10371
  • For use with various LiftMaster® Commercial Door Operators; manufactured prior to 2005 only
2376.200.35.930

Whiting Torsion assembly .200 wire size 35" spring length 93" shaft

3257

Whiting General Purpose Bottom Seal #80841

  • Quote required prior to sale to ensure correct fit
Z9408

Coupler 1" Bore Adjustable Black 170634

  • Malleable Iron for strength
  • Set screws and jamb nuts installed
  • 1" bore with 1/4" keyway
  • Thickness: 0.50"
  • Painted black
K41-0082-000

LiftMaster HD Motor Replacement Kit

  • This service kit is compatible with the following models: HDSL24UL & HDSW24UL
801-300-002-01-REFURB

Refurbished 801-300-002-01 Unit

SUPPORT008

Manaras Board Support 1" ** Special Order Only

DC300-75-1-WP

Dyna-Hoist 300 Series Direct Drive BBU 3/4 HP 110/240V 1" Shaft Weather-Resistant ** Quote Only

  • Special-Order. Price by Quote Only
  • Automated battery backup - the unit continues to work on batteries with full functionality (but does move more slowly) until the unit gets to about 75% of battery capacity then transitions to push and hold operation.
  • The 300 series also works with and powers 12V automatic lock systems
  • Option available: 5-conductor cable (5') to reduce the risks of miswiring incidents available in 5' 10' 15' 20' or 25' lengths
  • Integrated software fuse that shuts down the unit to help prevent board component disasters should these be incorrectly installed on grossly imbalanced or improperly sized doors.
  • 30:1 40:1 50:1 gearbox ratio are available. Please specify when ordering
    • .......more details
D800-120-1

Cable Drum High Lift 800-120 1" HL Pair

  • Adjustable cable attachment with screw
  • Made of aluminum
  • High Lift capacity: 120" max
  • Flat capacity: 266" max
  • Rating: 2200 lb per door max
  • Keyway: 1 KW of 1/4" width
    • .......more details
TS-1-111-GALV-KEY

Tube Shaft 1" x 111 (9'.25) Galv w/KW 1/4" x 3/8"

  • When ordering order one foot longer that actual door width
  • Comes with 3 keys 1/4-3/8-3'' long
ETBH-311-3/4HP

Doorlec 3/4 HP 115V Trolley Door Opener with solenoid brake

  • Trolley model heavy-duty door operator designed to provide smooth dependable operation of sectional overhead type doors.
CRBH505L5R

LiftMaster 1/2 HP 575 VAC 3 PH Commercial Hoist Operator Logic 5 with Carwash Modification

  • H-style operators include a floor level chain hoist to ease manual operation in an emergency or power outage.
  • The operators are typically mounted to the wall when used with larger sectional overhead doors with vertical or high lift and mounted to the wall or the front of the hood when used with rolling doors and grilles.
  • H operators are attached to the door jackshaft to indirectly drive the door.
  • With the addition of the 828LM MyQ technology enables the user to monitor and control their operator and light with their smartphone tablet or computer.
  • Alerts can be received as email or pop-up (push) notifications on a mobile device ensuring the status of your commercial door.
  • Security+ 2.0â„¢ safeguards your facility – with every click a new code is sent to the commercial door operator so the door opens only for you.
    • .......more details