Devanco Canada

 
User Name:
Password:
Remember Me:
Forgot your password
Request a Login
Home
20-1100C-2P

LiftMaster Electric Motor 1HP 115/230V 1P

  • Replacement motor for SL595
41AC050-2

LiftMaster Electronic Circuit Board Assembly 315MHz

  • Fits 3265 PD612C
  • Replaces 41AC150-2 (board only - need to install on exisiting panel)
  • Also known as 41AC050 41AC050-2M
28-32085

Truck Door 2" Vertical Track with Holes 95.00" Long for Whiting Roll-Up Doors *** To extent of inventory

  • Galvanized steel 14-gauge construction
  • Tabbed at both ends for proper alignment at track joints and to allow universal fit for both left hand and right hand frame sides.
  • Holes drilled to allow for faster plug weld installation to frame
  • For use with 2" diameter steel or nylon rollers
STRUT-2-1/4-18'

Door Strut 2-1/4" Hemmed 18ft Long

  • Reinforcement bar 2-1/4"
25605R

Genie Inner Slide Kit for Chain Drive Models

  • The innerslide attaches to the chain and connects the carriage to the chain
  • Works on the following Genie and Overhead Door models:
  • IC250 PMX80 PMX500-IC/B IC250/B PMX85 ALC Series PMX60 PMX300-IC/A RCD Series PMX65 PMX500IC/A PMX75 PMX-IC/B
  • SP99 – SP SERIES LD100-500-100A-550A LAD125-555
  • CM6000-6000A-60-70-80-60S
  • OHD-696 696CD + Others
    • .......more details
MX00149

Micanan Complete Clutch Shaft Assembly for PRO-H

1005-1-3/4-12

Aluminum Bottom Retainer U-Shaped

  • For door thickness 1-3/4"
19-50ML-NP

Master Link #50 Nickel Plated

MK-00493

Reversing Contactor Telemecanique 24V Coil (MK-01179)

  • Same as MK-01179
41C3196

LiftMaster Antenna for Co-Axial Receiver

  • Wire antenna kit same as what is supplied in a 312 / 412 HMC
MDKP

Linear MegaCode Exterior Wireless Keypad 318 MHz

  • MDKP can transmit a unique signal for each 1-6 digit PIN code entered.
  • It has a built-in radio transmitter with a 250-foot range in line-of-sight conditions.
  • Access codes are programmed into the access controller or receiver the maximum number of codes possible depends on the receiver model used.
  • Features Include:
  • Internal antenna
  • 1-6 digit PIN for each user
    • .......more details
Installation Manual
12FT-TROLLEY-SET

LiftMaster 12' Track Set for Trolley Operator 10-5812-P (2pcs) *Actual length 179"*

  • Actual length: 179" (14' 11")
821LM

LiftMaster MyQ Garage Universal Smartphone Garage Door Controller

  • Enables smartphone control of most major brands of garage door opener with photoeyes.
  • Includes Wi-Fi hub and door sensor
Installation ManualManuel d'InstallationSell SheetBrochure
41A7635

LiftMaster Transformer 100V

  • For model: 8550
MH00013

Micanan Flange Bearing 3/4" ID x 1-3/8" OD

  • Pro-H requires 3 of these bearings
MS00003

Micanan Carriage for PRO-APT / T

  • For model PRO-APT / T
TUBE_SHAFT_18FT

Hollow Shaft 1" x 18'-10" Galvanized 14 gauge

.243-2-R

Cut-to-Length Torsion Spring .243 x 2" Right Hand Wound White/Yellow

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-200-INSTALLED
109020

Linear 1-Channel Multi-Code Receiver 300 MHz

  • Three tabs for universal mounting
  • One "NO" relay
  • Compatible with 10 dip- swith 300 MHz Multi-code transmitters
  • Operates on 24 VAC power
  • One channel
  • Codes: 1024 (set by dip switches)
    • .......more details
Programming Instructions
309013

Linear 1-Channel Multi-Code Receiver 310 MHz

  • Three tabs for universal mounting
  • One N/O relay
  • Compatible with 310 MHz Stanley and Multi-Code transmitters only.
  • Operates on 24 VAC power
  • One channel
  • Codes: 1024 (set by dip switches)
    • .......more details
Programming Instructions
.273-134-R

Cut-to-Length Torsion Spring .273 x 1-3/4" Right Hand Wound Orange/Red

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-134-INSTALLED
.234-134-R

Cut-to-Length Torsion Spring .234 x 1-3/4" Right Hand Wound Blue/White

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-134-INSTALLED
C-258-INSTALLED

Cones 2-5/8" Factory Installed (Pair)

  • For do-it-yourself installation use part no. SF258
21-3260-1

LiftMaster Transformer 50/60Hz 60va 120/208/240/480V

  • 120/208/240/480V PRIMARY 24V SECONDARY
41D794

LiftMaster Replacement Motor with Positioning Sensor

  • Electric motor for model 3850
Installation ManualManuel d'Installation
CPS-UN4

LiftMaster Commercial Protector System Thru-Beam Eyes NEMA4

  • Waterproof photoeyes.
  • for direct connect to operators with Logic boards. L3 L4 L5
  • Receiving Eye - A: 50-50997 Sending Eye - A: 50-50998
  • These eyes will also work on the Micanan UL325 monitored operators
Installation ManualManuel d'InstallationSell Sheet
CR2450

Maxcell/Renata 3V Lithium Button Cell

ME113-L

Miller Edge Black Left Hand Outlet 2-Wire 1-1/2" wide x 1-1/2" high Sold by the Foot

  • Slide in edge designed for commercial sectional doors
  • Retrofits easily to 1-1/4" to 1-1/2" sectional doors
  • Touch sensitive signaling allows for immedita stopping or reversing of motion
  • For a sectional door: measure the daylight opening of the door or measure the panel width of the door
  • This gives you the "active length" of the edge - the length to order.
  • Lead wire: 22 gauge universal
    • .......more details
Installation ManualWorksheetSell Sheet
377LMC

LiftMaster Wireless Keyless Entry 315 MHz ***Replaced by 878MAX

  • Compatible with Liftmaster Sec+ garage door openers commercial door operators gate operators and radio control receivers
  • Mounts easily to the door jamb with two screws
  • Compatible with openers built 2005+
  • Replaces 376LMC and same as Chamberlain 956D same as 377LM
  • Includes 9V battery
Programming InstructionsInstructions de programmation
.331_3-3/4"-LH

Torsion Spring .331 x 3-3/4" x 12ft LH Red/White

  • Wire size: .331
  • Inside diameter: 3-3/4"
  • Length: 12 ft
AA

Battery AA Alkaline Duracell Procell Sold Individually

  • Sold Individually
LSGUN

Loop Sealant Gun for Quart Sized (32oz) Tubes

  • Caulking gun for LSBLK / LSGRY
71-B120H

LiftMaster Interior Brake Kit with Cable 115V (Logic 3 4 and Models)

  • Interior mount brake kit for operation with chain hoist
  • Works on mechanical operators as well as logic 2 3 4 and early logic 5 motors.
Instruction Manual
R-831-J

FL-Allstar 1-Door O/C/S Receiver in Oil Tight Case (JIC) 107478-311 MHz **NLA

  • This receiver is included in a JIC box.
  • Like the model R-831-P it has three isolated contacts to open close and stop the doors and a possibility of 6 561 operational codes to enhance the security level. If your operator can be controlled by three button station then our R-831-J receiver and commercial remote controls will work with your operator.
  • Manufacturer's model number: 190-107478
  • Dimensions: 9 1/4" x 6 7/8" x 1 1/4".
Programming Instructions - Dip Switch VersionProgramming Instructions - Learn Button Version
CAM004

Manaras Limit Cam

  • Limit cam for Mountshaft009A 018C 018D
  • 2 cam's required per shaft
41K4629

LiftMaster CPS Interface Black Box (CPICARD)

  • Allows CPS-U photoeyes to provide a 'NO' contact
  • Interface is included with CPS & CPS-N4
  • Also known as 041K4629 1C4489 41K4629 41C4489 CPI
144C56

LiftMaster Idler - Cable Pulley for chain drive

  • For square rail assemblies
  • Same as 144C0056
.363_6"-RH

Torsion Spring .363 x 6" x 12ft RH Green/White

  • Wire size: .363
  • Inside diameter: 6"
  • Length: 12 ft
.406_5-1/4"-RH

Torsion Spring .406 x 5-1/4" x 12ft RH Blue/Yellow

  • Wire size: .406
  • Inside diameter: 5-1/4"
  • Length: 12 ft
.331_5-1/4"-RH

Torsion Spring .331 x 5-1/4" x 12ft RH Red/White

  • Wire size: .331
  • Inside diameter: 5-1/4"
  • Length: 12 ft
.262_2-5/8"-RH

Torsion Spring .262 x 2-5/8" x 12ft RH Red/Yellow

  • Wire size: .262
  • Inside diameter: 2-5/8"
  • Length: 12 ft
.207_2"-RH

Torsion Spring .207 x 2" x 12ft RH Brown

  • Wire size: .207
  • Inside diameter: 2"
  • Length: 12 ft
25-60652

Truck Door Reefer Bottom Roller Bracket Assembly for Whiting Style Doors ** To Extent of Inventory

  • Steel construction Black E-coat finish
  • Consist of roller clamp wear plate stud plate and 5/16" lock nuts
  • Stainless steel studs and nuts
  • Cross ref: 5600
41A4373A

LiftMaster Safety Sensor Kit 1993-1998 ** Replaced by 041-0136 & 041-0155-000

  • For LiftMaster Chamberlain & Sears openers built from 1993-1998
  • Kit includes: Saftey sensors 24" wire and gel connectors
  • Replacement: 041-0136 with the 041-0155-000 brackets
PRO-HHD-7511U-R

Micanan 3/4HP 115V 1P Heavy-Duty Jackshaft N1 Eyes Monitored ECB Right Hand

  • 3/4 HP115V 1PH Industrial Continuous Duty Jackshaft Operator Ideal for Sectional Doors Rolling Steel
  • Monitored logic board with integral 372Mhz radio receiver that can hold up to 20 transmitters (MK-00647/ MK-00653/ MK-00659) or 200 of the 1 channel hand held transmitters (MK-00660).
  • N-1 Through-beam (MK-00649) photocells included. Other options available.
  • 3-btn O/S/C (02-103) wall control station included
  • Adjustable Friction Clutch 5L320 drive belt
  • #50 Roller chain 18 tooth door sprocket included
    • .......more details
Installation manualSpecification sheet
S2TR2641E4

Erone 4-Channel Mini Transmitter 433MHz

  • Open/Close remote for 4 doors
  • Palm-size transmitters 83 x 48 x 16mm (3.25 x 1.9 x 0.6in)
  • Ergonomic stylish design rugged & durable
  • Light grey base with yellow buttons
  • Unobstructed range: 820 ft (250m)
  • One 12V lithium battery included
    • .......more details
Sell SheetBrochureWireless System Chart
OPH-6112-ECB

Manaras Opera-H 1/2HP 120V 1Ph with Electronic Circuit Board

  • A heavy-duty industrial jackshaft operator.
  • For use on Standard High and Vertical Lift sectional doors.
  • Can also be used on Rolling doors or Grilles.
  • Comes with a self-engaging chain hoist for manual operation.
  • Clearence: side room required 15"
  • 25 cycles per hour 100 cycles per day
    • .......more details
Installation ManualSell Sheet
BOARD065

Manaras Replacement Circuit Board (No Monitoring)

  • Replacement kit that includes BOARD060 (control board) & BOARD066R (power board)
  • For all Manaras operators built before October 2010
  • For newer models built after October 2010 use BOARD070 or replacement kit BOARD075
Installation ManualManuel d'installationReplacement ChartGuide de remplacement
TRANSF142

Manaras Transformer 575-24V 40VA

  • Transformer 575V Primary 24V Secondary 40VA
LIMIT024

Manaras Double Snap-Action Limit Switch with Flat Lever

  • Replacement for LIMIT003
  • 2x SPDT - Unimax
  • Same as Doorlec # 21702
Limit Switch Chart
DRUM005

Manaras Steel Brake Drum 5/8" - replaces DRUM004

  • Replaces DRUM004
  • Brake drum with edges for current braking systems (2000 - current)
  • Used on all Manaras operators except Gear Head models.
  • Use with BRAKEPART019 (old part BRAKEPART017)
RADIO-RE101C

Manaras Factory Installed Mod plug-in receiver for Board 70 operators 390 MHz

  • Direct ECB plug-in receiver card (factory installed)
  • 16 transmitters maximun per receiver.
  • Use part # RADIO-KIT004 when adding or replacing on-site.
  • This is now standard equipment on all Circuit board operators
RADIO-28

Manaras MTM-1000 1-btn mini transmitter 313 MHz ** To extent of inv*** Repl. by RADIO-EM901

  • Open/Close mini remote for 1 door
  • Comes with LED battery life indicator
  • Mini 12V battery included
  • Key chain holder included
5377.115

Whiting Side Seals 1/2" Track Spacing 115" Long

  • Most common side seal for Whiting Dry Freight doors.
  • 115 inches will fit almost every size door.
108210

Linear 1-Channel Multi-Code Key Ring Transmitter 310 MHz

  • Open/Close mini remote for 1 door
  • Compatible with 310 MHz Stanley and Multi-Code receivers
  • Easy access to battery and coding switches - 10 dip switches
  • Power: 12-volt battery
  • Codes: 1024 (set by dip switches)
  • RF frequency: 310 MHz
    • .......more details
Programming Instructions
308302

Linear 2-Channel Multi-Code Key Ring Transmitter 310 MHz

  • Open/Close remote for 2 doors
  • Compatible with 310 MHz Stanley and Multi-Code receivers
  • Easy access to battery and coding switches - 10 dip switches
  • Power: 12-volt battery
  • Codes: 1024 codes for each channel (set by dip switches)
  • RF frequency: 310 MHz
    • .......more details
Programming Instructions
1336.4

Whiting Roadside Top Panel Closure Bracket for 8" radius track

831-R

Allstar 1-Door O/C/S Receiver 107480 318 MHz ** To Extent of Inventory

  • Three channels - three relay outputs
  • Textured aluminum case
  • Terminal strip for wiring
  • Wire whip antenna with "F" connector
  • Compatible with Allstar Classic Allister and Pulsar dipswitch transmitters and MVP quik-code transmitters
  • Power: 24 VAC
    • .......more details
Programming Instructions - Dip Switch VersionProgramming Instructions - Learn Button Version
831-RJ

Allstar 1-Door O/C/S Receiver in Oil Tight Case (JIC) 107478 318 MHz *** To extent of inventory

  • Three channels - three relay outputs
  • Oil-tight JIC ABS case
  • Terminal strip for wiring
  • Wire whip antenna with "F" connector
  • Compatible with Allstar Classic Allister and Pulsar dipswitch transmitters and MVP quik-code transmitters
  • Power: 24 VAC/VDC
    • .......more details
Programming Instructions - Dip Switch VersionProgramming Instructions - Learn Button Version
MCT-2

Linear 2-btn MegaCode Visor Transmitter 318 MHz

  • Activates two 318MHz MegaCode receivers independently
  • Test/operate LED
  • Visor mounting clip supplied
  • Power: 9-volt battery incl.
  • Codes: 1000000+ (MegaCode format)
  • Dimensions: 2.16" W x 3.75" H x .95" D
    • .......more details
Programming Instructions
DT2A

Linear 2-btn Delta3 Transmitter 310 MHz (DNT00017A)

  • Activates two Delta-3 receivers independently
  • Test/operate LED
  • Visor mounting clip supplied
  • Power: 9-volt battery
  • Codes: 256 (set by dip switches)
  • RF frequency: 310 MHz
    • .......more details
Programming Instructions
218189-01

Linear Trolley Assembly

4005-8FT

Aluminum Retainer only for Heavy Brush 8' Long 180 degree

  • For angle application (180 degree)
  • For use with Heavy Brush
4010-12FT

Aluminum Retainer only for Light Brush 12' Long 180 degree

  • For angle application (180 degree)
  • For use with Light Brush or Vinyl Insert
4007-16FT

Aluminum Retainer only for Light Brush***Actual Length 16'2" 90 degree

  • For angle application
  • For use with Light Brush or Vinyl Insert.
  • die # A-25060
4003-6FT

Aluminum Retainer only for Light Brush 6' Long 90 and 180 degree

  • For angle application (90 degree & 180 degree).
  • For use with Light Brush or Vinyl Insert.
1003-1-5/8-8'

Aluminum Bottom Retainer L-Shaped

  • For 1-5/8" thick doors.
1104-14FT-BLACK

Residential Side & Top PVC Weather-Strip with cap 14' Long - Black (B)

  • Black rigid vinyl retainer with black flexible vinyl seal.
  • Dual fin vinyl.
  • Comes with cap to hide screws.
1104-8FT-DK-BRN

Residential Side & Top PVC Weather-Strip with cap 8' Long - Commercial Brown (DN)

  • Commercial brown rigid vinyl retainer with commercial brown flexible vinyl seal.
  • Dual fin vinyl.
  • Comes with cap to hide screws.
BLOCK-YELLOW

Spring Repair Blocks .3175-.3625 Pair

  • For the temporary repair of a broken spring.
  • Wire size: .3175 - .3625
BLOCK-BLUE

Spring Repair Blocks .2187-.3065 Pair

  • For the temporary repair of a broken spring.
  • Wire size: .2187 - .3065
1001-24-BLACK

Commercial Side & Top Weather-Strip 24' Long - Black

  • Aluminum retainer with black dual-fin vinyl
1001-10-BLACK

Commercial Side & Top Weather-Strip 10' Long - Black

  • Aluminum retainer with black dual-fin vinyl
32-48-170

Extension Spring 8' Door - 170 lbs Orange ** Replaced by 27-48-170

  • Double - Loop
  • 32" long 48" stretch 170 lb load
  • Springs sold individually
  • Rated for 10000 cycles
Spec Sheet
32-48-160

Extension Spring 8' Door - 160 lbs Brown ** Replaced by 27-48-160

  • Double - Loop
  • 32" long 48" stretch 160 lb load
  • Springs sold individually
Spec Sheet
25-42-200

Extension Spring 7' Door - 200 lbs Tan

  • Double - Loop
  • 25" long 42" stretch 200 lb load
  • Sold individually
  • Rated for 10000 cycles
  • Same as part number 120
Spec Sheet
25-42-80

Extension Spring 7' Door - 80 lbs Gold

  • Double - Loop
  • 25" long 42" stretch 80 lb load
  • Sold individually
  • Rated for 10000 cycles
Spec Sheet
93-00240

Truck Door Spacer Washer for Rollers

  • Used with Rollers to help adjust Roll up doors
  • Cross Reference: T #80020 W #6 #66 140100
28-02114

Truck Door 2" Vertical Track and Right Angle Assembly 120" Roadside (LH) for Whiting Roll-Up doors

  • SPECS: Length: 120" Fits door sizes: 101" - 114" high
  • Assembly includes: Right angle mounting track Vertical track and Torsion bracket
  • Cross Reference: W #2275-2
  • Galvanized steel 14 gauge construction
  • Tongue and groove for proper alignment at joints
DM54

Cable Drum High Lift 54" 5250-54 Pair

  • 54" High Lift aluminum die cast alloy.
  • 3/8"-16x2" hardened cup point set screws installed with red heads.
  • Color coded: Red-LH and Black=RH.
  • Maximum High Lift: 54" Maximum Door Height: 180" + High Lift
  • Rated lift per drum: 500 lbs 1000 lbs per door max
  • Maximum cable diameter: 3/16"
    • .......more details
27-20500

Truck Door Bearing and Bracket Plate Assembly for Roll-Up Doors

  • Zinc plated finish
  • Bearing with 1" bore pressed in a football style flanged retainer
  • Factory installation assures proper bearing alignment
  • Cross reference: T #51038 W #4033 320000
26-40037

Truck Door Offset U-Channel Seal Retainer 96" Long for Whiting DryFreight Doors *** To extent of inventory

  • Aluminum extrusion construction.
  • Retainer is offset to allow header clearence with seal when door is in open position.
  • For use with offset bottom seal #26-40040
  • Cross Reference: W #8280
26-40018

Truck Door Bottom L-Retainer 84" Long for Todco Roll-Up Doors

  • Galvanized steel construction for extra strength and corrosion resistance.
  • Fits both standard and heavy-duty bottom seals.
  • Pre-punched holes for added convenience
  • Cross Reference: T #61191 W #4034 260000
26-14325

Truck Door Bottom Panel with Seal (15" x 98") for Todco DryFreight Doors

  • These panels are cut to an extra wide width to fit wider vehicle applications.
  • Interlocking tongue and groove design for weather-tight joint and proper panel alignment.
  • 3/4" thick 7 ply exterior grade medium density plywood. Primer finish
  • Comes only with bottom retainer and seal (installed)
25E10271

Truck Door Stud Plate for Bottom Roller Black E-coat finish for Whiting Roll-Up Doors

  • Steel construction Black E-coat finish
  • Stud plate for 1 stud
  • Cross Reference: W #1370
25E10003

Truck Door Roller Cover for End Hinge Black E-coat finish for Whiting Roll-Up Doors

  • Steel construction Black E-coat finish
  • Cross Reference: W #1208 T #70161
DM4X8

Cable Drum Standard Lift 8' 400-8 Pair

  • 8' Standard Lift aluminum die cast alloy.
  • Pair includes: (1) LH and (1) RH Color coded: Red=LH and Black=RH
  • Max. Door Height: 8'-1".
  • Rated Lift per Drum: 265 lbs
  • Max. Cable Diameter: 1/8"
  • Mounting: 1" tube or solid shaft with 1/4" keyway
    • .......more details
DM28VL-125

Cable Drum Vertical Lift 28' 1350-28 (1-1/4") Pair

  • 28' Vertical Lift aluminum die cast alloy for 1-1/4" shaft.
  • 3/8"-16 x2" hardened cup point set screws installed with red heads. -
  • Color coded: Red=LH and Black=RH. Pair includes (1) LH and (1) RH.
  • Max. Door Height: 28'-1".
  • Rated Lift per Drum: 1100 lbs.
  • Max. Cable Diameter: 1/4".
    • .......more details
SF375

Spring Fitting 3-3/4" Pair (Long Ear)

  • Universal thread for use in either LH or RH wound springs.
  • Pair includes: (1) winding & (1) stationary.
  • Maximum wire size diameter: .4062".
  • Set screw installed: 3/8"-16 x 1-1/2" (2).
  • Mounting: 1" tube or solid shaft - min. 1/2 turns on the set screws.
  • Winding bar hole 5/8"
    • .......more details
H11G11

Hinge #11 x 11 gauge

  • 11 gauge # 11 hinge - 0.93 lbs
  • Bright zinc-plated steel construction
  • For use with 7/16" stem rollers
CB18B0500

Cable 1/8" 7x19 500' Galvanized

  • Galvanized Cable 1/8" 7x19 500ft spool.
  • Cable break strength: 2000 lbs
Comparison charts
25-10501

Truck Door Max Strength Steel Lock (only) for Todco Roll-Up Doors

  • Superior strength heavy-duty cast grade 30 steel Zinc plated finish
  • Pins are mechanically fastened in place for optimum strength
  • Extra thick padlock provision designed for greater security
  • Trapped handle cannot pull out to bypass keeper resulting in tamper-proof lock
  • Spring assisted lock eliminates door bounce
  • Cross Reference: T #69571 280000
    • .......more details
8500C

LiftMaster Residential Jackshaft Garage Door Opener ***No Longer Available

  • MyQ technology enables you to securely monitor and control your garage door opener and houselights with your smartphone tablet or computer
  • Alerts can be received as email or pop-up (push) notifications on your mobile device so that you always know the status of your garage door and houselights
  • MyQ mobile app is a free download requiring no annual activation fee requires 828lm
  • Wall mount design with an ultra-quiet 3/4 HP soft start-soft stop DC electric motor
  • Frees the garage ceiling of hanging operators and rails and opens up the space for additional storage – ideal for cathedral or obstructed ceilings
  • Remote light (380LM) delivers 200 watts of light with adjustable light time delay
    • .......more details
R5209

Cast Iron Pulley 4"

  • Bored for 3/8" diameter bolt
  • Maximum cable diameter: 1/4"
  • Cast iron pulley mounted on two pressed sealed bearings
  • 300lb load rating
25-10311

Truck Door Heavy-Duty Lift Handle Zinc

  • Heavy-duty wide grip design
  • Zinc plated finish
  • Cross Reference: T #61401 W #1715 250000
41A5034

LiftMaster Snappy Beam Sensors ** DISCONTINUED USE 041-0136

  • Will work on all LiftMaster residential openers equipped with safety beams
  • For newer models 1999-current will fit on existing brackets
  • For older models 1993-1999 new brackets #41A5266-1 are required or use old style safety beams #41A4373A
  • New Gen ( 2021+) operators will have new snappy beam sensors part number 041-0136
  • Not compatible with the New Gen (2021+) 041-0155 snappy beam brackets
6X12SC50

Devanco Loop 6' x 12' saw-cut 50' lead-in

  • Manufactured to the highest quality standards to ensure accurate detection our Pre-formed loops come with a 50 foot twisted lead-in ware and available lead-in lengths up to 500 feet.
  • Ideal for use on existing asphalt or concrete surfaces
  • Features a non spliced continuous wire throughout loop turns and lead-in.
  • requires the use of loop sealer when being installed to ensure long lasting trouble-free detection
Installation InstructionsInstructions d'installationLoop Placement GuideGuide de positionnement des boucles
6X10PO50

Devanco Loop 6' x 10' pave-over 50' lead-in

  • Ideal for use on with gravel driveways or sufaces that are to be asphalted
  • Features a twisted lead-in to reduce the chances of interference and false detections.
  • Direct burial loops should be buried approximately 6" deep
Installation InstructionsInstructions d'installationSpec SheetBrochureLoop Placement GuideGuide de positionnement des boucles
971LMC

LiftMaster 1-btn Security+ Transmitter 390MHz

  • 390 MHz Security+ single button visor remote
  • Compatible with Security+ systems with Amber learn button including Chamberlain Sears Craftsman and Raynor code rolling residential openers (Safety Signal) manufactured 1997-2005
  • Visor clip and Lithium battery included (part #CR2032)
  • Same as 971LM 91LM 950CB 950CD
Programming Instructions
MOUNTSHAFT014

Manaras Clutch Shaft Kit for Opera-H (OPH)

  • Input / clutch shaft kit for Manaras Opera-H
Drawing