Devanco Canada - Get The Right Garage Door Opener‎ and Parts

1091303602

Overhead 2-btn Transmitter 360 MHz model: 111663-3602

OVERHEAD DOOR remote control transmitter 109130-3602 works with 9 dip switch on 360 frequency.
Part number has changed to 111663-3602

Programming Instructions

77810.0001

Overhead Door Box Assembly Cushion (#111389.0001.S) ** Price by quote only

Garage door operator bracket for older Overhead Door residential models (Automate 70 Touch n Go R-80 100 100SS 1000) and commercial garage door openers.

45DCT

LiftMaster Circuit Board

Board: Tri-band Security+ 2.0
DC Chain/ Belt Drive model
Fits: 8360 8550
Also known as; 45DCBR1A 041D7356 1D7356 41DCBC1A 41DCBC3A 41DCCC2A 41DCBC5A 45DCCL5A 45DCCL3A 45DCCL1A 45DCCR5A 41D7356 45DCCR3A 45DCCR1A 001D7356 41DCCC1A 41DCCC3A 45DCJL5A 45DCRL1A 41DCCC5A 45DCRL3A 45DCJL1A 45DCJL3A 45DCBL5A 45DCBL3A 45DCBL1A 45DCBR5A 45DCRL 45DCBR3A 47DCCR1 1D8363 045DCT 45DCBL1 45DCBL2 45DCBL3 45DCBL4 45DCBL5 45DCCL1 45DCCL2 45DCCL3 45DCCL4 45DCCL5 45DCBR1 45DCBR2 45DCBR3 45DCBR4 45DCBR5 45DCCR1 45DCCR2 45DCCR3 45DCCR4 45DCCR5

41A5021-9G-315

LiftMaster Circuit Board Assembly

Board: Security+ 315 MHz
Aeesmbly includes: circuit board and end panel
Also includes 1 Multi-Function wall ctrl panel - 2 wire
For ATS2113X model
For older ATS operators use replacement board 41A5021-1ATS

02-103

Push Button Station 3-btn Surface Mount Metal Housing

PBS-3
Open-Close-Stop
Momentary contact
Nema 1
Dimensions: 5-5/16" H x 2-3/8" W x 1-13/16" D

ME112-E

Miller Edge Black 2W Non Monitored End Outlet 1-5/16" wide x 1-1/2" high Sold by the Foot

Slide in edge designed for commercial sectional doors and gates.
Retrofits easily to 1" to 1-1/4" sectional doors
Touch sensitive signaling allows for immediate stopping/reversing of motion
For sectional doors: measure the daylight opening of the door or measure the panel width of the door
This gives you the "active length" of the edge - the length to order
Lead wire: 22 gauge univversal

.......more details

Installation Manual Worksheet Sell Sheet

.343_5-1/4"-LH

Torsion Spring .343 x 5-1/4" x 12ft LH Blue/Red

Wire size: .343
Inside diameter: 5-1/4"
Length: 12 ft

.306_5-1/4"-LH

Torsion Spring .306 x 5-1/4" x 12ft LH Red

Wire size: .306
Inside diameter: 5-1/4"
Length: 12 ft

829LM

LiftMaster Garage and Gate Monitor Sec+ 2.0 **to extent of inventory

This innovative monitor lets you check and close the garage door or gate from any room in the house.
Green and Red LED lights indicate whether the garage door or gate is open or closed.
Volume controlled audible alert lets you know when the garage door or gate is being opened.
Able to monitor and close up to four garage doors or gates.
Compatible only with new Sec+ 2.0 MyQ compatible garage door and gate operators.

Programming Instructions Instructions de programmation

LSBLK

Loop Sealant Cartridge Black 29oz

Also available in grey (LSGRY)
Can be installed in sub-zero temperatures as long as the surface is clean and dry
Loop sealant gun sold separatley # LSGUN

41D3452

LiftMaster Limit Switch Assembly

Compatible with most operators 1986 - current

41C4470

LiftMaster Gear & Sprocket Assembly for ATS211

Complete Gear and sprocket assembly for ATS211 ATS211R built from 1993 - 2003

Installation Manual Manuel d'Installation

41DB002-2

LiftMaster Circuit Board Assembly *** To Extent of Inventory

Assembly includes: Circuit board end panel and light socket
For belt drive units with two lights such as 3850C
Same as 41A5685

T-639

FL-Allstar 3-btn 9-Door O/C/S Transmitter 107476-311 MHz

This remote can control (open-close-stop) up to nine doors.
It has a eight switches encoder with three positions: + 0 and - .
Manufacturer's model number: 639T (190-107476)
Dimensions: 6 1/4" x 3 3/8" x 1 3/8".

Programming Instructions

19-48ML

Master Link #48

For #48 chain (#410)
Same as #65 chain

.343_2-5/8"-RH

Torsion Spring .343 x 2-5/8" x 12ft RH Blue/Red

Wire size: .343
Inside diameter: 2-5/8"
Length: 12 ft

.273_2-5/8"-RH

Torsion Spring .273 x 2-5/8" x 12ft RH Orange/Red

Wire size: .273
Inside diameter: 2-5/8"
Length: 12 ft

.234_1-3/4"-RH

Torsion Spring .234 x 1-3/4" x 12ft RH Blue/White

Wire size: .234
Inside diameter: 1-3/4"
Length: 12 ft

.207_1-3/4"-RH

Torsion Spring .207 x 1-3/4" x 12ft RH Brown

Wire size: .207
Inside diameter: 1-3/4"
Length: 12 ft

MJ00003

Micanan Brake Drum ** To extent of inventory

Fits all Micanan commercial operators equipped with a solenoid brake
Available only in complete kit # MJ00013

H14G06

Hinge #6 x 14 gauge ** To extent of Inventory

Bright zinc plated 14-gauge steel hinge
For use with 7/16" diameter stem rollers
Full body hinge 2-3/4" wide
#6 position
Use between sections 6 and 7
Same as part number 246

.......more details

CONTACTOR044

Manaras Schneider Reversing Contactor 12A-24VAC

Reversing contactor with 24V coil
Same as part # LC2K12107B7
Demensions: 3.5" long x 2.25" wide x 2.25" high
Use 03-8024K as possible replacement

VBELT_4L360

Manaras VBelt 4L 36" - repl. by A34

Used on MJ / MJH models
New belt type A replaces old 4L360. Part number VBELTA34

RADIO-KIT004

Manaras plug-in receiver for Board 70 operators 390 MHz

Direct ECB plug-in receiver card kit (RADIO-RE101C) for adding or replacing on-site.
Maximum 16 transmitters per receiver.
Compatible with transmitters RADIOEM101 and RADIOEM103 SD/MD

7470.115

Whiting Side Seal for insulated doors 115" Long

Fits Coldsaver and Tempguard

831-RJ

Allstar 1-Door O/C/S Receiver in Oil Tight Case (JIC) 107478 318 MHz *** To extent of inventory

Three channels - three relay outputs
Oil-tight JIC ABS case
Terminal strip for wiring
Wire whip antenna with "F" connector
Compatible with Allstar Classic Allister and Pulsar dipswitch transmitters and MVP quik-code transmitters
Power: 24 VAC/VDC

.......more details

Programming Instructions - Dip Switch Version Programming Instructions - Learn Button Version

111645

Allstar MVP 1-Channel 4-Wire Gate Receiver 318 MHz ***Replaced by P-9931R-4F

One channel
4-wire operator connection
Wire whip antenna with "F" connector
Compatible with Allstar Classic Allister and Pulsar dipswitch transmitters and MVP quik-code transmitters
Power: 24 VAC/VDC
Codes: 19683

.......more details

Programming Instructions

1209.1

Whiting Stainless Steel Truck Door Side Hinge with Roller Cover

1003-1-3/8-24'

Aluminum Bottom Retainer L-Shaped

For 1-3/8" thick doors.
DIE # ES18009

1104-7FT-BLACK

Residential Side & Top PVC Weather-Strip with cap 7' Long - Black (B)

Black rigid vinyl retainer with black flexible vinyl seal.
Dual fin vinyl.
Comes with cap to hide screws.

RCB-2560

Roller Chain Break #25 thru #60

Replacement tip included.

1104-18FT-SAND

Residential Side & Top PVC Weather-Strip with cap 18' Long - Sandstone (D)

Sandstone rigid vinyl retainer with sandstone flexible vinyl seal.
Dual fin vinyl.
Comes with cap to hide screws.
Also known as Taupe

7001-10-WHITE

Commercial Side & Top Weather-Strip 10' Long - White (W)

White galvanized steel with white dual fin vinyl.
Commercial and Residential use.
Steel is notched on both ends for easier installation.

1102-14-BLACK

Commercial Side & Top Weather-Strip 14' Long - Black

Aluminum retainer with black heavy-duty dual fin vinyl.

25-42-300

Extension Spring 7' Door - 300 lbs Tan w/ clip

Double - Loop
25" long 42" stretch 300 lb load
Sold individually
Rated for 10000 cycles

Spec Sheet

25-42-240

Extension Spring 7' Door - 240 lbs Blue w/ clip

Double - Loop end for strength
25" long 42" stretch 240 lb load
Sold individually
Rated for 10000 cycles

Spec Sheet

25-42-100

Extension Spring 7' Door - 100 lbs Tan

Double - Loop
25" long 42" stretch 100 lb load
Sold individually
Same as part number 111
Rated for 10000 cycles

Spec Sheet

27-20305

Truck Door Balancer Bracket Center for Whiting Roll-Up Doors

Steel construction
Plain finish
Cross Reference: W #2525

SF258

Spring Fitting 2-5/8" Pair

Universal thread for use in either LH or RH wound springs.
Pair includes: (1) winding & (1) stationary.
Maximum wire size diameter: .3310".
Set screw installed: 3/8"-16 x 1" (2).
Mounting: 1" tube or solid shaft - min. 1/2 turns on set screws.
Winding bar hole 1/2"

.......more details

RS1027

Roller 2" Steel 7" stem 10 ball

Steel Roller Wheel Diameter: 2"
Working Length: 6.25" Overall Length: 7.25"
Box qty: 180 Box weight: 73.5 lbs (2-7-10 steel)

BK312

Jamb bracket J-12 #12 12 gauge

Sold by the piece
Height 5.0" Length 1.9" Width 2.45"
Bright zinc plated 12 gauge steel
2" long track mounting slot accepts 5/16" track bolts

25-10100

Truck Door 1" Steel Roller 2.5" Shaft Length for Todco Roll-Up Doors

Zinc plated Hardened shaft and raceways
Seven roller ball design
Cross Reference: T #61174 T #69162 W #4026 W #4027 291000
Box quantity: 25

6X10SC50

Devanco Loop 6' x 10' saw-cut 50' lead-in

Manufactured to the highest quality standards to ensure accurate detection our Pre-formed loops come with a 50 foot twisted lead-in ware and available lead-in lengths up to 500 feet.
Ideal for use on existing asphalt or concrete surfaces
Features a non spliced continuous wire throughout loop turns and lead-in.
requires the use of loop sealer when being installed to ensure long lasting trouble-free detection

Installation Instructions Instructions d'installation Loop Placement Guide Guide de positionnement des boucles

4X33PO50

Devanco Loop 4' x 33' pave-over 50' lead-in

Ideal for use on with gravel driveways or surfaces that are to be asphalted
Features a twisted lead-in to reduce the chances of interference and false detections.
Direct burial loops should be buried approximately 6" deep

Installation Instructions Instructions d'installation Spec Sheet Brochure Loop Placement Guide Guide de positionnement des boucles

ULTRA-DIN

EMX Industries DIN Rail Mount Vehicle Loop Detector

Ignores cross traffic in tight spaces with DETECT-ON-STOP™ feature
Easy to install and setup with the ULTRAMETER™ sensitivity display
Low current draw – green product
Easy identification of interference problems using the crosstalk and RFI interference display
Fits into small operator housings saving space size: 80 x 23 x 84 mm
10 sensitivity settings

.......more details

DRQP

Linear 1-Channel Delta3 Gate Receiver 310 MHz ** Available to extent of inventory

1-Channel Gate Receiver
High-sensitivity short-range radio receiver
Operates in conjunction with the 9-inch local antenna (supplied).
Designed for use with automatic gate operators or systems where a remote antenna is needed.
Same as: DNR00013P

Installation Manual

218954-03

Linear Pulley & Bracket Assembly - Belt (HBT)

STRUT-2-1/4-10'

Door Strut 2-1/4" Hemmed 10 ft Long

Reinforcement bar 2-1/4"
Electro-Galvanized
22-GA

2G-RIGHT

Rolling Steel 2" Curved Stamped Endlock Right Hand

Endlocks are riveted to curtain slats ends of every other slat to prevent slats from shifting laterally and to prevent curtain wear in guides.
Continuous endlocks are at both ends of every slat.
Rivets included with endlocks

WLMODULE002

Manaras Univ. Aux Output Module BOARD070

41DJ002

LiftMaster Circuit Board with Plate for 8500

Board: Security+ 2.0 for DC Jackshaft Model 8500
5 year warranty

41A4373A

LiftMaster Safety Sensor Kit 1993-1998 ** Replaced by 041-0136 & 041-0155-000

For LiftMaster Chamberlain & Sears openers built from 1993-1998
Kit includes: Saftey sensors 24" wire and gel connectors
Replacement: 041-0136 with the 041-0155-000 brackets

EBOX-HHD-7511-R

Complete Control Box for PRO-HHD-7511 with Mechanical Contactor and Timer to Close

4X3PO50

Devanco Loop 4' x 3' pave-over 50' lead-in

Ideal for use on with gravel driveways or surfaces that are to be asphalted
Features a twisted lead-in to reduce the chances of interference and false detections.
Direct burial loops should be buried approximately 6" deep

Installation Instructions Instructions d'installation Spec Sheet Brochure Loop Placement Guide Guide de positionnement des boucles

PRO-J-5023-U-RH

Micanan 1/2HP 230V 3P Jackshaft Monitored ECB N1 Eyes Right Hand

On board receiver with antenna
Continuous duty industrial motor with overload protection
Heavy duty 5L V-belt
Adjustable friction clutch
Solenoid brake (optional PRO-JB) recommended for large doors
3/4" permanently lubricated & sealed precision ball bearings on pulley shaft

.......more details

Pro J Manual Specification Sheet

ALUM-536

Aluminum 24" x 100' Spool Dover Gray / Gris Granite # 536

20% thicker than the aluminum sold in retail stores (0.022" )
Gentek # 536
Reverse side is #431 Bright White

Colour chart

179193

Work Light LED Bar Black 1600 Lumens

LED Power: 20W
Beam: Spot
Size: 26" x 12" x 12"

HDSW24UL

Liftmaster Heavy-Duty Variable Speed Swing Gate Op. 24VDC Heater Not Incl.

Includes safety device LMRRUL Monitored Retroreflective Photo Eye enhanced retro-reflect
Features battery backup that provides up to 45 cycles or 120 days of standby power
Smooth Start/Stop Operation and mid-travel reversal extend operator and hardware life.
Heavy-Duty Commercial Gear-Driven Transmission provides unsurpassed reliability.
myQ® Technology enables you to securely control and monitor your gate operator from anywhere
Security+ 2.0® safeguards access with an encrypted tri-band signal to virtually eliminate interference and offer extended range.

.......more details

GALV-406-6-R

Cut-to-Length Torsion Spring .406 x 6" Right Hand Wound Galvanized Blue/Yellow Price per Inch

Priced per inch - cones sold seperately
For factory installed cones use part no. C-600-INSTALLED
Galvanized

MC271-2W-RH-GRAY

Miller Edge MC271 2-Wire Non-Monitored Right Hand Gray Includes End Flaps - Sold per Foot

Ideal for Cornell double angle bottom bar
Flexible and will conform to floor irregularities
Optimum size for 2+ inch thick surfaces
Custom manufactured to user specifications for color length and outlet location
5-inch end flaps create a complete seal and can be trimmed for custom fit
Sealed assembly impervious to dust and debris

.......more details

LAP

Linear External Antenna Kit LA-P AAE00366

Compatible with DVS-1200 DVS-2400 and DUAL-824 systems
Omni-directional external antenna
Antenna connector mounts inside case wire whip extends outside case
Compatible with EXA-1000 external antenna
Designed to enhance the radio range of Linear's DVS-1200 DVS-2400 and DUAL-824 systems.
The LA-P antenna Type F connector can also be used for coax connection with a remote mounted EXA-1000 antenna.

.......more details

03-8024-K

Reversing Contactor 3-Pole

Reversing contactor with 24 VOLT coil
Dimensions: 3.5" long x 2.25" wide x 2.25" high
Telemecanique part # LC 2K09 107B7

K72-12507

LiftMaster Clutch Shaft Kit (3/4 & 1HP)

Clutch Shaft Kit 3/4 & 1 HP Trolley operators
Complete with: Clutch Plate Clutch Shaft Bearing 3/4' I.D. Sprocket 41B10x3/4' 5L Belt Motor Pulley Spring Clutch Disk Shim Washers Castle Nut Flatwashers Cotter Pin Roll Pins and Push on Fastener

Installation manual

99119671

Amarr Bottom U-Seal 3.5" Black Double Dovetail Vinyl 1/4" T 200' Roll

1/4" T width
Used on Amarr Residential Open Back Doors and Classica models

T-931-MH

FL-Heddolf 1-btn Mini Transmitter P219-1K-311 MHz (New # T-931-MS)

Keystone-Heddolf miniature 1 button transmitter 311mhz
12 volt battery and keychain included
(9) 3-position dip switch format
Compatible with Keystone T-931-H and Allstar T-931 and T-931-M
Also known as FIR311DEK31K

Programming instructions

D4-12

Extruded Bumper Black 12" L x 4 1/2" W x 3 3/4" H w/Metal Insert

Reinforced prime rubber of Durometer 75 (±5) (ASTM D2240)
8.3 N/mm2 (±0.5) Tensile Strength (ASTM D792)
98% (±2) impact recovery
All extruded fenders are supplied with a metal washer insert

38000063

Tork Winch Electric Motor 1HP 115V 1Ph

Replacement electric motor for TW 1200

2500-1495

Linear Pushbutton Stop/Reset

63000709

FAAC P Limit Switch Magnetic 746/844 (Rack)

Compatible with the 746 and 844 motors
Replaces discontinued FAAC Part; 7580375

MC271-2MON-RH-GY

Miller Edge MC271 2-Wire Monitored Right Hand Gray Includes End Flaps - Sold per Foot

Ideal for Cornell double angle bottom bar
Flexible and will conform to floor irregularities
Optimum size for 2+ inch thick surfaces
Custom manufactured to user specifications for color length and outlet location
5-inch end flaps create a complete seal and can be trimmed for custom fit
Sealed assembly impervious to dust and debris

.......more details

K41-0082-000

LiftMaster HD Motor Replacement Kit

This service kit is compatible with the following models: HDSL24UL & HDSW24UL

WB-660

Skylink Wireless Wall Console w/ Auto Close for ATR Garage Openers

For use with the Skylink garage door openers.
Oversized Push Button for activating the garage door opener.
Activate opener light on/off and the light will remain on until the button is pressed again.
Feature with Lock function to ignore all radio signals for added security.
Illuminated LED indication.
Easy to Install.

.......more details

31226

Doorlec Sprocket 41B48-1" shaft

RDRG63.3.1-1:1/2

Maximum Output Torque Generated Chain Hoist Rolling Door w/4B60HD-1:1/2K3/8-2S5/16SQ ** Spec Order

112357.0003

Overhead Logic Board for RSX 208 460 3PH

K41-0252-000

LiftMaster Gear Reducer IHSL24UL

Compatible with LiftMaster® IHSL24UL Series Industrial Heavy Duty Gate Operators

10-LHB

BEA LZR Housing Bracket

��Housing bracket for the LZR-H100 sensor

SHAKER-XL-R16

Garex Ready to Install Door Special Order

Door Thickness: 1 ¾" (4445 mm) / RSI 281 (R-16)
Panel Height: 18 21 and 24 inches (45 53 and 60 cm)
Panel Width: Up to 24 feet (732 m)
Texture: Woodgrain
Offered in various choices of colours

GALV-331-258-L

Cut-to-Length Torsion Spring .331 x 2-5/8" Left Hand Wound Galvanized Red/White

Priced per inch - cones sold seperately
For factory installed cones use part no. C-258-INSTALLED
Galvanized

GALV-283-334-R

Cut-to-Length Torsion Spring .283 x 3-3/4" Right Hand Wound Galvanized White Price per Inch

Priced per inch - cones sold seperately
For factory installed cones use part no. C-334-INSTALLED

99000568-PER-FT

Amarr Bottom U-Seal 3.5" Gray Vinyl 1/4" T Sold per Foot

1/4" T width
Used on Strat 3000 Herit 3000 and Commercial (exceot 1350 & 2700)

GALV-243-258-L

Cut-to-Length Torsion Spring .243 x 2-5/8" Left Hand Wound Galvanized Price per Inch

Priced per inch - cones sold seperately
For factory installed cones use part no. C-258-INSTALLED

K41-0410-000

LiftMaster 1200 Extended Duty Motor Gear Box Encoder Hoist

For Maxum Hoist 1200 Op

MOD050N2

Manaras Friction Clutch Mod. #50 Chain 1-1/4 RGH

Installed directly on the output shaft of the operator.
Provides added protection by causing the clutch to slip when the door systems requires adnormal torque to be operated.
Includes sprocket for #50 chain
Operator mounting side must be specified
A spreader bar cannot be used in conjunction with this modification
This modification applies to RGH ops

.......more details

BEA-10BODYGUARD-T

BEA Automatic Overhead Pedestrian Swing Door Sensor

Designed to provide threshold protection during the open state
Prevents a closed door from opening and an open door from closing when a person is in the detection zone.
Adjustments can be made with the BEA remote.
Installation height: 9' max (6'6" to 8' recommended)
Operating temperature: -22 F to 140F
Immune to electrical and radio frequency interference

.......more details

Installation Manual Manuel d-Installation

OGH-6536-M-N1-RH

Manaras 2 HP 600V 3Ph Gear Head Operator Monitored ECB w/N1 Eyes Right Hand

A heavy-duty worm gear industrial operator designed for use on industrial standard high and vertical lift sectional doors or rolling doors and grills.
Includes a self-engaging chain hoist for manual operation
25 cycles per hour 80 cycles a day
Hoist on right side standard can easily be moved to the left in field
Full overload protection
BRACKET112 must be used for wall mounting

.......more details

15-50B72QGH

Sprocket 72 Teeth 1-1/4" Bore 1/4" Keyway

For use with various LiftMaster® Logic 4.0/5.0 and MAXUM DC Standard-Duty and Industrial-Duty Commercial Door Operators

2110-643-UPS

Linear Snap Lock Assembly with Keys (2)

Fits HSLG GSLG-A Ups

XF600VAC7

LiftMaster 600V Transformer Kit 700

For use with various LiftMaster® MAXUM Series DC 700 lbs. Standard-Duty and Industrial-Duty Commercial Door Operators

Q521

LiftMaster Wiring Harness Kit CSW-DM K94-50287

Compatible with LiftMaster® Model CSW200UL Swing Gate Operators
Also known as: 94-50287 K94-50287

PRO-EJ-5011-U

Micanan 1/2HP 115V 1P internal lock sensor Jackshaft Monitored ECB N1 Eyes Left Hand

On board receiver with antenna
Continuous duty industrial motor with overload protection
Heavy duty 5L V-belt
Adjustable friction clutch
Solenoid brake (optional PRO-JB) recommended for large doors
3/4" permanently lubricated & sealed precision ball bearings on pulley shaft

.......more details

GALV-250-334-144-L

Torsion Spring .250 x 3-3/4" x 12ft LH Galvanized Green

Wire size: .250
Inside diameter: 3-3/4"
Length: 12 ft
Galvanized Stenciled

GALV-243-258-144-R

Torsion Spring .243 x 2-5/8" x 12ft RH Galvanized White/Yellow

Wire size: .243
Inside diameter: 2-5/8"
Length: 12 ft
Galvanized Stenciled

11.6135

Whiting Horizontal Track 2" x 135" L 6" Radius Curbside 1 Piece

1 curbside horizontal track

Q123

LiftMaster Electric Motor 12VDC K20-9012B-1

For use with various LiftMaster® Slide and Swing Gate Commercial Door Operators

PHOTO-065

Manaras Monitored Photoelectric Cells N4X Retro-Reflective 5-50' Range

Monitored NEMA 4X enclosure retro-reflective type photocell
2-Wire
Suited for harsh environments
Range: 5-50 ft

Manual

BEA-10LIGHT-TR

BEA Modular LED Signal Light Segment Red

Signal lights for industrial and vehicle flow management applications.
LED signal modular lights offer customizable configurations with “build-your-own” lighting elements that share a common base and bracket.
These LED signal units are available in red green yellow and an audible alarm cap and can be stacked in a tower configuration with up to six modules.
Operating temperature: -40 to 122F
Nema 4/IP65
Base sold separately

.......more details