Devanco Canada - Get The Right Garage Door Opener‎ and Parts

TUBE_SHAFT_18FT

Hollow Shaft 1" x 18'-10" Galvanized 14 gauge

TUBE_SHAFT_9FT

Hollow Shaft 1" x 9'-10" Galvanized 16 gauge

TUBE_SHAFT_17FT

Hollow Shaft 1" x 17-0" Galvanized 16 gauge

50-101-2

Exterior 3-Wire Air Switch SPDT with Plastic Housing Mosley

Nema 4
3-wire air switch; 1-NO and 1-NC contact
Mosley
NO contact on Yellow and Green

.225-258-L

Cut-to-Length Torsion Spring .225 x 2-5/8" Left Hand Wound Orange/Green

Priced per inch - cones sold seperately
For factory installed cones use part no. C-258-INSTALLED

.250-2-L

Cut-to-Length Torsion Spring .250 x 2" Left Hand Wound Green

Priced per inch - cones sold seperately
For factory installed cones use part no. C-200-INSTALLED

.243-2-R

Cut-to-Length Torsion Spring .243 x 2" Right Hand Wound White/Yellow

Priced per inch - cones sold seperately
For factory installed cones use part no. C-200-INSTALLED

.218-2-R

Cut-to-Length Torsion Spring .218 x 2" Right Hand Wound Yellow/Orange

Priced per inch - cones sold seperately
For factory installed cones use part no. C-200-INSTALLED

309013

Linear 1-Channel Multi-Code Receiver 310 MHz

Three tabs for universal mounting
One N/O relay
Compatible with 310 MHz Stanley and Multi-Code transmitters only.
Operates on 24 VAC power
One channel
Codes: 1024 (set by dip switches)

.......more details

Programming Instructions

02-111

LiftMaster Pull Switch Assembly *** Available to Extent of Inventory

Swivel end
Nema 1
Same as Pull Cord

86LMC

LiftMaster Antenna Extension Kit

For use with 312HMC 412HMC 422LMC and 423LMC
Kit contains 15ft of cable

387LMC

LiftMaster Universal Wireless Keyless Entry

Universal Keyless Entry works with garage doors made by LiftMaster Genie Stanley Overhead Door Wayne-Dalton Craftsman Chamberlain and Linear/Moor-o-Matic.
Single manufacturer/single frequency design – you pick the manufacturer and frequency for the garage door you want to open
Wireless – powered by one 9V battery (included)
Weatherproof slide-up protective cover
Open or close the garage door without using a remote
Backlit keypad

.......more details

Programming Instructions Instructions de programmation Sell Sheet

19-10929

LiftMaster Hoist Chain Sold by the Foot

and Chain for LiftMaster commercial hoist operators

7FT-RAIL-CHAIN

LiftMaster 7' chain drive rail 1707LMC - colour code: Green

#48 chain size
Price reflects cost if purchased with an opener

111010.0001

Overhead Door Serpentine VBelt 27"

Serpentine belt 27" long
Fits Genie GCL-T Trolley operator
Some Overhead drawbar models: JST RSX RMX

41D794

LiftMaster Replacement Motor with Positioning Sensor

Electric motor for model 3850

Installation Manual Manuel d'Installation

ME123-BLK-LH

Miller Edge Black Left Hand Outlet 2-Wire 2" wide x 1-1/2" high Sold by the Foot

Electromechanical slide in edge for sectional doors and sliding gates.
Touch sensitive singaling allows for immediate stopping and reversing of motion
Temperature range: -30F to 155F
Lead wire: 22 gauge universal
Sensitivity: nominal 6-8 PSI
2 wire NO configuration

.......more details

Installation Manual Worksheet Sell Sheet

378LMC

LiftMaster Wireless Control Panel

Wireless control panel for 315 MHz Chamberlain openers
For use as a secondary wall control panel only
Mounting hardware and batteries included (CR2032)
Auxiliary button to open/close 2nd garage door

Programming Instructions Instructions de programmation

881LMW

LiftMaster Motion-Detecting Control Panel with TTC Sec+ 2.0 Wi-Fi

Push button for garage door operation
Motion-detector automatically turns on the light when movement is detected
150 degree sensing angle for motion sensor
Program remote controls Wi-Fi Garage Door Openers and MyQ® enabled accessories directly from the control panel
Timer-to-Close feature automatically closes the garage door after a pre-programmed number of minutes - 1 5 or 10
Light run-time is 4 1/2 minutes with adjustable light timer option

.......more details

.312_6"-LH

Torsion Spring .312 x 6" x 12ft LH Yellow

Wire size: .312
Inside diameter: 6"
Length: 12 ft

.437_3-3/4"-LH

Torsion Spring .437 x 3-3/4" x 12ft LH Red/Green

Wire size: .437
Inside diameter: 3-3/4"
Length: 12 ft

.295_3-3/4"-LH

Torsion Spring .295 x 3-3/4" x 12ft LH Blue

Wire size: .295
Inside diameter: 3-3/4"
Length: 12 ft

.243_3-3/4"-LH

Torsion Spring .243 x 3-3/4" x 12ft LH White/Yellow

Wire size: .243
Inside diameter: 3-3/4"
Length: 12 ft

.262_2-5/8"-LH

Torsion Spring .262 x 2-5/8" x 12ft LH Red/Yellow

Wire size: .262
Inside diameter: 2-5/8"
Length: 12 ft

.250_2"-LH

Torsion Spring .250 x 2" x 12ft LH Green

Wire size: .250
Inside diameter: 2"
Length: 12 ft

.250_1-3/4"-LH

Torsion Spring .250 x 1-3/4" x 12ft LH Green

Wire size: .250
Inside diameter: 1-3/4"
Length: 12 ft

.243_1-3/4"-LH

Torsion Spring .243 x 1-3/4" x 12ft LH White/Yellow

Wire size: .243
Inside diameter: 1-3/4"
Length: 12 ft

9V-1/PKG

Battery 9V 1-Pkg Alkaline Duracell Procell

LSGUN

Loop Sealant Gun for Quart Sized (32oz) Tubes

Caulking gun for LSBLK / LSGRY

71-B240

LiftMaster Interior Mount Brake Assembly 230-460V

Assembly includes: Brake Hub Kit Brake Release Lever Brake Disk Spring Cup Studs Compression Springs Brake Solenoid Solenoid Cover Spacers Mounting Plate Pressure Plate Feather Key Conduit.
Works on LiftMaster trolley garage door openers

Instruction Manual

29-31244

LiftMaster Relay 24VDC 6-Pin DPST (A & B Relay) All Operators

41A5483-1C

LiftMaster Circuit Board Assembly *** Discontinued

Assembly includes: Circuit board and end panel
For chain drive units with one light
Fits models 2245 & 2255
Last letter of the part # indicates revision date the most recent product will be sent out
Also known as 41A5483-1 41A5483-1B

41A5266-1

LiftMaster Brackets for Snappy Sensors (41A5266-3) *** Discontinued

For units from 1993- present equipped with safety sensors
Same as 41A5266-3
For use with with 41A5281
New Gen (2021+) snappy beam sensors 041-0136 are compatible with these brackets and the new 041-0155 brackets
The new brackets (041-0155) are not backwards compatible

41A6102

LiftMaster Power Door Lock

For Jackshaft models

.319_6"-RH

Torsion Spring .319 x 6" x 12ft RH Blue/Green

Wire size: .319
Inside diameter: 6"
Length: 12 ft

.331_5-1/4"-RH

Torsion Spring .331 x 5-1/4" x 12ft RH Red/White

Wire size: .331
Inside diameter: 5-1/4"
Length: 12 ft

.273_3-3/4"-RH

Torsion Spring .273 x 3-3/4" x 12ft RH Orange/Red

Wire size: .273
Inside diameter: 3-3/4"
Length: 12 ft

.225_2"-RH

Torsion Spring .225 x 2" x 12ft RH Orange/Green

Wire size: .225
Inside diameter: 2"
Length: 12 ft

23-10041-1

LiftMaster Double Limit Switch Commercial DP DT

Double limit switch DP DT
For LiftMaster and Micanan operators

17310

Doorlec DC-3000T2 2-btn Transmitter 313 MHz

One block of 10 dip-switches for programming
Will activate 2 Doorlec 17307 receivers (DC-3000R)
Includes visor clip and 9V battery

Programming Instructions

H14GHALF

Half Hinge #1 x 14 gauge

Bright zinc plated 14-gauge steel hinge
For use with 7/16" diameter stem rollers
Full body hinge 1-5/8" wide with slotted holes

877LM

LiftMaster Sec+ 2.0 Keyless Entry

Features Security+2.0™ rolling code technology
One-button-to-close feature
Temporary password option
Program code directly from keypad
Backlit keypad
Includes 9V battery

.......more details

877LM Manual

OPH-6533-ECB

Manaras Opera-H 3/4HP 600V 3Ph with Electronic Circuit Board

A heavy-duty industrial jackshaft operator
For use on Standard High and Vertical Lift sectional doors
Can also be used on Rolling doors and Grilles
Comes with a self-engaging chain hoist for manual operation
Clearence: side room required 15"

Installation Manual Sell Sheet

MOUNTSHAFT001A

Manaras Clutch Shaft Kit for MJH

Input / clutch shaft kit for MJH built after 1999

Drawing

M-VERSION

Manaras Monitored Entrapment Protection Option Upgrade Mont Thru-Beam + N1 Eyes

Upgrades added when purchasing a commercial operator

DRUM006

Manaras Steel Brake Drum Flat Track - replaces DRUM001

Replaces DRUM001
Brake drum for all operators except Gear Head models prior to 1999.
Use with BRAKEPART018

RADIO-47

Manaras MCT-1 3-btn O/C/S transmitter 1 door **Replaced by RADIO-EM932

Open/Close/Stop remote for 1 door
Comes with LED battery life indicator
9V battery included
Can be wall or post mounted
Must be used with MCR series receivers

Programming Instructions

RADIO-28

Manaras MTM-1000 1-btn mini transmitter 313 MHz ** To extent of inv*** Repl. by RADIO-EM901

Open/Close mini remote for 1 door
Comes with LED battery life indicator
Mini 12V battery included
Key chain holder included

2705.162_180

Whiting Curbside Torsion Spring for Cube Truck Roll-Up Doors 18" Long

Most common torsion spring for cube trucks
Specs: .162 x 2-3/16" x 18" Long
For Roadside order part # 2704.162*180

2704.162_180

Whiting Roadside Torsion Spring for Cube Truck Roll-Up Doors 18" Long

Most common torsion spring for cube trucks
Specs: .162 x 2-3/16" x 18" Long
For Curbside order part # 2705.162*180

MGR

Linear 1-Channel MegaCode Gate Receiver 318 MHz

��Single Form ”A” (normally open) relay rated at 30 Volts AC/DC up to 5 Amps
Supplied with whip antenna three feet of coaxial cable and bulkhead connector
Memory: storage for up to 40 MegaCode transmitters
Power: 12 - 30 VAC or 10.5 - 30 VDC
Codes: 1000000+ (MegaCode format)
RF frequency: 318 MHz

.......more details

Installation Manual

8833T-OCS

Allstar 3-btn 1-Door O/C/S Transmitter 109372 318 MHz *** To Extent of Inventory

Open/Close/Stop remote for 1 door
Compatible with 3-channel Allstar and MVP receivers
Portable transmitter
Easy access to battery and coding switch
Power: 9-volt battery
Codes: 6561 (set by eight trinary dip switches)

.......more details

Programming Instructions

639T

Allstar 3-btn 9-Door O/C/S Transmitter 107476 318 MHz ***Replaced by P-639T

Open/Close/Stop remote for 9 doors
Compatible with 3-channel Allstar and MVP receivers
Stationary mounting
Easy access to battery and coding switch
Power: 9-volt battery
Codes: 6561 (set by eight trinary dip switches)

.......more details

Programming Instructions

535T

Allstar 3-btn 27-Door O/C/S Transmitter 107475 318 MHz ***Replaced by P-535T

Open/Close/Stop remote for 27 doors
Compatible with 3-channel Allstar and MVP receivers
Stationary mounting
Easy access to battery and coding switch
Power: 9-volt battery
Codes: 6561 (set by eight trinary dip switches)

.......more details

Programming Instructions

MCT-3

Linear 3-btn MegaCode Transmitter 318 MHz ** Use MTS3

Activates three 318 MHz MegaCode receivers
Test/operate LED
Visor mounting clip supplied
Two CR2032 batteries included
Codes: 1000000+ (MegaCode format)
Dimensions: 3" W x 1.875" H x .625" D

.......more details

Programming Instructions

HAE00018

Linear Inner Slide Assembly - Chain (HCT)

For LSO50 LDO33 & LDO50

HAE00040

Linear Control Logic/Receiver Board

Replaces HAE00039
Control board for LSO LDO LCO models

200BL

2" Light Brush Insert 6ft Long

Polypropylene bristles
Same as model MS1703

4010-12FT

Aluminum Retainer only for Light Brush 12' Long 180 degree

For angle application (180 degree)
For use with Light Brush or Vinyl Insert

4004-8FT

Aluminum Retainer only for Heavy Brush 8' Long 45 degree

For angle application (45 degree)
For use with Heavy Brush

4005-8FT

Aluminum Retainer only for Heavy Brush 8' Long 180 degree

For angle application (180 degree)
For use with Heavy Brush

4008-12FT

Aluminum Retainer only for Light Brush 12' Long 180 degree 5/8" Offset

2" Offset
For use with Light Brush or Vinyl Insert

4006-6FT

Aluminum Retainer only for Light Brush 6' Long 45 degree

For angle application (45 degree)
For use with Light Brush or Vinyl Insert.

4002-6FT

45 Degree Aluminum Retainer for Light Brush 6' Long 45 degree

For angle application (45 degree)
For use with Light Brush or Vinyl Insert.

1006-1-3/8-10'

Rigid Vinyl Bottom Retainer U-Shaped 10' Long

Black with flexible fin to touch door face.
For door thickness 1-3/8"

1006-1-3/4-12'

Rigid Vinyl Bottom Retainer U-Shaped 12' Long

Black with flexible fin to touch door face.
For door thickness 1-3/4"

1005-1-1/2-16'

Aluminum Bottom Retainer U-Shaped 16' Long

For door thickness 1-1/2"

7001-16-BROWN

Commercial Side & Top Weather-Strip 16' Long - Brown (DN)

Brown galvanized steel with brown dual fin vinyl.
Commercial and Residential use.
Steel is notched on both ends for easier installation.

1104-10FT-BLACK

Residential Side & Top PVC Weather-Strip with cap 10' Long - Black (B)

Black rigid vinyl retainer with black flexible vinyl seal.
Dual fin vinyl.
Comes with cap to hide screws.

1104-12FT-DK-BN

Residential Side & Top PVC Weather-Strip with cap 12' Long - Commercial Brown (DN)

Commercial brown rigid vinyl retainer with commercial brown flexible vinyl seal.
Dual fin vinyl.
Comes with cap to hide screws.

1104-16FT-BROWN

Residential Side & Top PVC Weather-Strip with cap 16' Long - Brown (N)

Brown rigid vinyl retainer with brown flexible vinyl seal.
Dual fin vinyl.
Comes with cap to hide screws.

1104-8FT-BROWN

Residential Side & Top PVC Weather-Strip with cap 8' Long - Brown (N)

Brown rigid vinyl retainer with brown flexible vinyl seal.
Dual fin vinyl.
Comes with cap to hide screws.

BLOCK-RED

Spring Repair Blocks .3750-.4305 Pair

For the temporary repair of a broken spring.
Wire size: .3750 - .4305

1104-10FT-SAND

Residential Side & Top PVC Weather-Strip with cap 10' Long - Sandstone (D)

Sandstone rigid vinyl retainer with sandstone flexible vinyl seal.
Dual fin vinyl.
Comes with cap to hide screws.
Also known as Taupe

1104-7FT-SAND

Residential Side & Top PVC Weather-Strip with cap 7' Long - Sandstone (D)

Sandstone rigid vinyl retainer with sandstone flexible vinyl seal.
Dual fin vinyl.
Comes with cap to hide screws.
Also known as Taupe

1106-24-BLACK

Commercial Side & Top Weather-Strip 24' Long - Black

Aluminum retainer with black dual fin vinyl

1001-10-GREY

Commercial Side & Top Weather-Strip 10' Long - Grey

Aluminum retainer with grey dual-fin vinyl
Sold by full case quantity (10)

32-48-150

Extension Spring 8' Door - 150 lbs Red ** Replaced by 27-48-150

Double - Loop
32" long 48" stretch 150 lb load
Springs sold individually

Spec Sheet

91-00506

Truck Door U-Bolt 1-3/4" long

Zinc plated finish
Used to attach cables to Whiting doors
Cross Reference: W #70-5

28-02101

Truck Door 2" Vertical Track and Right Angle Assembly 106.5" Roadside (LH) for Whiting Roll-Up Doors

SPECS: Length: 106.5" Fits door sizes: 91" - 100" high
Assembly includes: Right angle mounting track Vertical track and Torsion bracket
Cross Reference: W #2275-2
Galvanized steel 14 gauge construction
Tongue and groove for proper alignment at joints

27-20400

Truck Door Bracket for Torsion Assembly Roadside (LH) for Todco Roll-Up Doors

Steel construction
Zinc plated finish
Cross Reference: T #51036-2 W #4028 360000

27-20127

Truck Door Spring Spacer 35" long for Whiting Roll-Up Doors

Extruded PVC construction with zinc plated thrust washer.
Cross Reference: 2471

26-94525

Truck Door Intermediate Panel (15" x 98") for Whiting Dryfreight

These panels are cut to an extra wide width to fit wider vehicle applications.
Interlocking tongue and groove design for weather-tight joint and proper panel alignment.
3/4" thick 7 ply exterior grade medium density plywood. Primer finish

26-94523

Truck Door Intermediate Panel (13" x 98") for Whiting Dryfreight

These panels are cut to an extra wide width to fit wider vehicle applications.
Interlocking tongue and groove design for weather-tight joint and proper panel alignment.
3/4" thick 7 ply exterior grade medium density plywood. Primer finish

26-14325

Truck Door Bottom Panel with Seal (15" x 98") for Todco DryFreight Doors

These panels are cut to an extra wide width to fit wider vehicle applications.
Interlocking tongue and groove design for weather-tight joint and proper panel alignment.
3/4" thick 7 ply exterior grade medium density plywood. Primer finish
Comes only with bottom retainer and seal (installed)

DM32

Cable Drum Standard Lift 32' 800-32 Pair

32' Standard Lift aluminum die cast alloy for a 1" solid shaft. Pair includes: (1) LH and (1) RH. Color coded: Red=LH and Black=RH
Max. Door Height: 32'-1".
Rated Lift per Drum: 1000 lbs
Max. Cable Diameter: 1/4".
Mounting: 1" solid shaft with 1/4" keyway
Cross Reference: D800-384 DNS 402-32 OMI 2300

.......more details

25-60052

Truck Door Latch Plate for Whiting Roll-Up Doors

Steel construction Plain finish
Contoured for proper lock engagement
Cross Reference: W #2804

25-10578

Truck Door Handle Keeper Only for Whiting Roll-Up Doors

Steel construction Black E-coat finish.
Keeper accomodates padlocks and trailer seals
Cross Reference: W #7515

HD8460-200

T-Handle Cable Lock System 2"

Complete cable locking system for a 2" door.
System includes: Auto Latch Striker Keeper T-Handle keyed with 4-1/4" shaft Inside release handle 3/32" cable and all required hardware.
Also works for for 1-3/4" doors

Z9404

Coupler 1-1/4" Bore Adjustable

Malleable iron for strength
With 2 jam nuts
1-1/4" Bore with 1/4" keyway

DM28VL

Cable Drum Vertical Lift 28' 1350-28 1" Bore Pair

28' Vertical Lift aluminum die cast alloy. •3/8"-16 x2" hardened cup point set screws installed with red heads.
Color coded: Red=LH and Black=RH. Pair includes (1) LH and (1) RH.
Max. Door Height: 28'-1".
Rated Lift per Drum: 1100 lbs.
Max. Cable Diameter: 1/4".
Mounting: 1" (or 1-1/4" must specify when ordering) solid shaft with 1/4" keyway.

.......more details

DM120

Cable Drum High Lift 120" 5750-120 Pair

120" High Lift aluminum die cast alloy cable drums.
3/8"-16 x 2" hardened cup point set screws installed with red heads.
Pair includes: (1) LH and (1) RH. Color coded: Red=LH and Black=RH.
Maximum high lift: 120".
Maximum door height: 144" + High Lift.
Rated lift per drum: 500 lbs.

.......more details

DM32-125

Cable Drum Standard Lift 32' 800-32 (1-1/4") Pair Torque Force

32 ft Standard lift aluminum die cast alloy cable drums for 1-1/4" shaft.
Pair includes (1) LH & (1) RH. Color coded: Red=LH and Black=RH.
3/8"-16 x 2" hardened cup point set screws installed with red heads.
Maximum Door Height: 32'-1".
Rated Lift per Drum: 1000 lbs.
Max Cable Diameter: 1/4".

.......more details

EP2987

Exhaust Port 6" with latch long barrel ** Discontinued

6" inside diameter 2" sleeve with latch.
Includes fasteners & gaskets.

CBA18B07

Cable Assembly 1/8" 7x19 102" Sold per Pair

Galvanized cable assembly for a 7ft door (102" = 8'6")
Aircraft cable made of 19 wires per strand and 7 strands per cable
Sold as a pair
Same as part number 457

RN1324

Roller 2" Nylon 4" stem 13 ball White Sold per Roller

White Nylon Roller Wheel Diameter: 2"
Working Length: 3.75" Overall Length: 4.71"
Box qty: 100 Box weight: 32.2 lbs (2-4-13 White Nylon)

6X12PO50

Devanco Loop 6' x 12' pave-over 50' lead-in

Ideal for use on with gravel driveways or sufaces that are to be asphalted
Features a twisted lead-in to reduce the chances of interference and false detections.
Direct burial loops should be buried approximately 6" deep

Installation Instructions Instructions d'installation Spec Sheet Brochure Loop Placement Guide Guide de positionnement des boucles

4X6PO50

Devanco Loop 4' x 6' pave-over 50' lead-in

Ideal for use on with gravel driveways or surfaces that are to be asphalted
Features a twisted lead-in to reduce the chances of interference and false detections.
Direct burial loops should be buried approximately 6" deep