Devanco Canada

 
User Name:
Password:
Remember Me:
Forgot your password
Request a Login
Home
.312-6-L-C

Cut-to-Length Torsion Spring .312 x 6" Left Hand Wound Coated ** Price by Quote Only

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-600-INSTALLED
.306-514-L-C

Cut-to-Length Torsion Spring .306 x 5-1/4" Left Hand Wound Coated ** Price by Quote Only

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-514-INSTALLED
.306-258-L-C

Cut-to-Length Torsion Spring .306 x 2-5/8" Left Hand Wound Coated ** Price by Quote Only

  • Priced per inch
  • For factory installed cones priced seperately - use part no. C-258-INSTALLED
.295-334-R-C

Cut-to-Length Torsion Spring .295 x 3-3/4" Right Hand Wound Coated ** Price by Quote Only

  • Priced per inch
  • For factory installed cones priced seperately - use part no. C-375-INSTALLED
.295-258-L-C

Cut-to-Length Torsion Spring .295 x 2-5/8" Left Hand Wound Coated ** Price by Quote Only

  • Priced per inch
  • For factory installed cones priced seperately - use part no. C-258-INSTALLED
.262-2-L-C

Cut-to-Length Torsion Spring .262 x 2" Left Hand Wound Coated ** Price by Quote Only

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-200-INSTALLED
.250-334-L-C

Cut-to-Length Torsion Spring .250 x 3-3/4" Left Hand Wound Coated ** Price by Quote Only

  • Priced per inch
  • For factory installed cones priced seperately - use part no. C-375-INSTALLED
.234-2-R-C

Cut-to-Length Torsion Spring .234 x 2" Right Hand Wound Coated ** Price by Quote Only

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-200-INSTALLED
.218-2-L-C

Cut-to-Length Torsion Spring .218 x 2" Left Hand Wound Coated ** Price by Quote Only

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-200-INSTALLED
PRO-GH-7521U-R

Micanan 3/4HP 230V 1P Gearhead Operator N1 Eyes Monitored ECB Right Hand

  • Includes 3-btn O/C/S control station Nema 1
  • External radio control terminal strip
  • Heavy duty worm gear reduction in oil bath gearbox
  • Solenoid brake standard
  • #50 roller chain and sprockets on final drive
  • Emergency chain hoist with electrical cut-out switch for manual operation
    • .......more details
Installation manualSpecification sheet
08-9098

LiftMaster Angle Mount Bracket Mounting Clip

PRO-HHD-5023U-R

Micanan 1/2HP 230V 3P Heavy-Duty Jackshaft N1 Eyes Monitored ECB Right Hand

  • 1/2 HP230V 3PH Industrial Continuous Duty Jackshaft Operator Ideal for Sectional Doors Rolling Steel
  • Monitored logic board with integral 372Mhz radio receiver that can hold up to 20 transmitters (MK-00647/ MK-00653/ MK-00659) or 200 of the 1 channel hand held transmitters (MK-00660).
  • N-1 Through-beam (MK-00649) photocells included. Other options available.
  • 3-btn O/S/C (02-103) wall control station included
  • Adjustable Friction Clutch 5L320 drive belt
  • #50 Roller chain 18 tooth door sprocket included
    • .......more details
Installation Manual (EN) Specification Sheet
PRO-HHD-5021U-R

Micanan 1/2HP 230V 1P Heavy-Duty Jackshaft N1 Eyes Monitored ECB Right Hand

  • 1/2 HP230V 1PH Industrial Continuous Duty Jackshaft Operator Ideal for Sectional Doors Rolling Steel
  • Monitored logic board with integral 372Mhz radio receiver that can hold up to 20 transmitters (MK-00647/ MK-00653/ MK-00659) or 200 of the 1 channel hand held transmitters (MK-00660).
  • N-1 Through-beam (MK-00649) photocells included. Other options available.
  • 3-btn O/S/C (02-103) wall control station included
  • Adjustable Friction Clutch 5L320 drive belt
  • #50 Roller chain 18 tooth door sprocket included
    • .......more details
Installation Manual (EN) Specification Sheet
PRO-HHD-5081U-R

Micanan 1/2HP 208V 1P Heavy-Duty Jackshaft N1 Eyes Monitored ECB Right Hand

  • 1/2 HP208V 1 PH Industrial Continuous Duty Jackshaft Operator Ideal for Sectional Doors Rolling Steel
  • Monitored logic board with integral 372Mhz radio receiver that can hold up to 20 transmitters (MK-00647/ MK-00653/ MK-00659) or 200 of the 1 channel hand held transmitters (MK-00660).
  • N-1 Through-beam (MK-00649) photocells included. Other options available.
  • 3-btn O/S/C (02-103) wall control station included
  • Adjustable Friction Clutch 5L320 drive belt
  • #50 Roller chain 18 tooth door sprocket included
    • .......more details
Installation Manual (EN) Specification Sheet
RADIO-RE900A

Manaras 1-Channel 24V Dip-Switch Receiver with Commercial Antenna 313 MHz *Replaced by RADIO-RE901A

  • For Commercial/Industrial Garage Door Applications
  • Wall Mount
  • Fixed Code / DIP Switch Technology
  • Sixteen (16) Fixed Codes / Receiver
  • 313 MHz Radio Frequency
  • Controls One (1) Door
    • .......more details
PRO-HB-7523U-LH

Micanan 3/4HP 230V 3P Hoist Op. with Brake N1 Eyes Monitored ECB Left Hand

  • Continuous duty belt drive jackshaft operator with emergency chain hoist
  • Full function Smart 10.0 Logic control board featuring on-board receiver with antenna
  • Nema 1 photoeyes included
  • Solenoid brake included
PRO-HB-5038U-RH

Micanan 1/2HP 380V 3P Hoist Op. with Brake N1 Eyes Monitored ECB Right Hand

  • Continuous duty belt drive jackshaft operator with emergency chain hoist
  • Full function Smart 10.0 Logic control board featuring on-board receiver with antenna
  • Nema 1 photoeyes included
  • Solenoid brake included
  • On-Board receiver holds up to 20 transmitters
CAM012

Manaras Roller Cam Opera

PRO-H-7581-U-LH

Micanan 3/4HP 208V 1P Hoist Operator N1 Eyes Monitored ECB Left Hand

  • Continuous duty belt drive jackshaft operator with emergency chain hoist
  • Full function Smart 10.0 Logic control board featuring on-board receiver with antenna
  • Nema 1 photoeyes included
  • Solenoid brake OPTIONAL
PRO-H-5043-U-RH

Micanan 1/2HP 460V 3P Hoist Operator N1 Eyes Monitored ECB Right Hand

  • Continuous duty belt drive jackshaft operator with emergency chain hoist
  • Full function Smart 10.0 Logic control board featuring on-board receiver with antenna
  • Nema 1 photoeyes included
  • Solenoid brake OPTIONAL
K71-D575-1

LiftMaster Drum Brake Kit 3 Ph 575V (Late Model Logic 5 Shoe and Drum Models)

  • Internal Solenoid Drum Brake with Cable Replacement Kit.
  • Compatible with LiftMaster® Logic 5.0 Model T SD J H and HJ Industrial-Duty Operators.
  • Complete service kit includes: Solenoid Cover Brake Solenoid Brake Drum Cable Mounting Plate and Installation Hardware.
  • Quiet preferred sound profile
  • Industry benchmark stopping performance with adjustability
  • Significantly reduced modes of failure
    • .......more details
Installation manualManuel d'installation
TRACK-SET-2STD-7

2" Tracks Set 7'-0" Torsion 1-3/4" Door Clips for Wood Frame 12" Radius *** By quote only

SEA868

Erone Tuned Antenna 868MHz

  • Increase reception and/or range
  • 11.5ft (3.5m) coaxial cable (RG 58) included
  • L-Shaped bracket for wall-mounting
Wireless System Chart
SEL2681R868-Z2

Erone 2-Relay Stand Alone Receiver 868MHz

Wireless System Chart
MK-00666

Micanan RF Junction Connector for Antenna

MK-00017

Micanan Ground Lug

MK-00053

Micanan Overload Reset 3-Phase 8.0 - 11.5 Amps

MK-00523

Micanan Reversing Contactor ABB Size 1 24V w/Interlock

  • LC2K1210B7 mini contactor
MK-01155

Micanan Transformer 460V-24V-50VA

MP-00077

Micanan Heavy Duty Front Idler (Trolley End Bracket) #41 w/Pillow Blocks

MK-00235

Micanan Flasher 120V

  • In closing cycle door will stop for 1.5 seconds and reverse to fully open
MV-00006

Micanan 3-btn O/C/S w/Key Lock-Out Nema-1 Pushbutton Control Station

  • Flush mount
HAML-WIRING-HARNESS

GDI Wiring Harness Length Per Foot G3343

  • If over 10' is required
.406-334-L

Cut-to-Length Torsion Spring .406 x 3-3/4" Left Hand Wound Blue/Yellow

  • Priced per inch - cones & filler sold seperately
  • For factory installed cones use part no. C-375-INSTALLED
.343-258-R

Cut-to-Length Torsion Spring .343 x 2-5/8" Right Hand Wound Blue/Red

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-258-INSTALLED
.312-258-L

Cut-to-Length Torsion Spring .312 x 2-5/8" Left Hand Wound Yellow

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-258-INSTALLED
.243-334-L

Cut-to-Length Torsion Spring .243 x 3-3/4" Left Hand Wound White/Yellow

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-375-INSTALLED
PRO-GT-15021-U

Micanan 1-1/2HP 230V 1P Worm Gear Trolley Operator N1 Eyes Monitored ECB

  • On-Board receiver holds up to 20 transmitters
PRO-GT-15083-U

Micanan 1-1/2HP 208V 3P Worm Gear Trolley Operator N1 Eyes Monitored ECB

  • On-Board receiver holds up to 20 transmitters
PRO-GT-5053-U

Micanan 1/2HP 575V 3P Worm Gear Trolley Operator N1 Eyes Monitored ECB

ALUM-568

Aluminum 24" x 100' Spool Nutmeg / Brun Muscade # 568

  • 20% thicker than the aluminum sold in retail stores (0.022" )
  • Gentek # 565
  • Reverse side is #431 Bright White
Colour chart
CP-HU-TC3-34-575/3

Lynx TC3 Medium-Heavy Duty Trolley Op. 3/4 HP 575V 3P Contactor Style

PRO-APTB-5083-U

Micanan 1/2HP 208V 3P Apartment Trolley Operator With Brake N1 Eyes Monitored ECB

  • Low clearance design for APT applications (9.5")
  • Door speed: 12" per second
  • Monitored board
  • On-Board receiver holds up to 20 transmitters
K001A6426-2

LiftMaster Control Board RSL12V/RSW12V

PRO-TB-7543-U

Micanan 3/4HP 460V 3P Trolley Operator with Brake N1 Eyes Monitored ECB

  • Designed for use on commercial / industrial sectional overhead doors with standard lift tracks.
  • #41 roller chain on 3/4 HP models
  • Monitored board
PRO-TB-5053-U

Micanan 1/2HP 575V 3P Trolley Operator with Brake N1 Eyes Monitored ECB

  • Designed for use on commercial / industrial sectional overhead doors with standard lift tracks.
  • #410 roller chain on 1/2 HP models
  • Monitored board
PRO-T-7543-U

Micanan 3/4HP 460V 3P Trolley Operator N1 Eyes Monitored ECB

  • Designed for use on commercial / industrial sectional overhead doors with standard lift tracks.
  • #41 roller chain on 3/4 HP models
  • Monitored board
PRO-T-7581-U

Micanan 3/4HP 208V 1P Trolley Operator N1 Eyes Monitored ECB

  • Designed for use on commercial / industrial sectional overhead doors with standard lift tracks.
  • #41 roller chain on 3/4 HP models
  • Monitored board
60-7244

Econo Caution Sign French 14" x 10"

88-8

Wheel Chock 88-8 Laminated Rubber Galv. Steel Sides

  • Fabric Reinforced Tire Rubber
  • Galvanized Steel Sides
  • Size: 8" wide x 8" long x 8" high
60-7248-WC5810

Wheel Chock Safety Pkg incl'd: chock wall bracket 15' chain 3/16" quick link (2) & English Caution Sign

  • System Includes (1) WC-5810 Chock Bracket Chain Tie Back Chain and English Caution Signs
  • Solid Rubber Construction
  • Hook for chain fastening
  • Long Lasting 80 Durometer rubber
  • Size: 8" wide x 10" long x 5" high
CC-07

Wheel Chock CC-07 Cast Aluminum Alloy

  • Reversible Chock Design
  • One-Piece Cast Construction
  • Cast Aluminum Alloy
  • Size: 10" Base x 9" high x 6-1/4" wide
LR110LTB3815

Telco Thru Beam Receiver M12

  • Remote receiver Series 110
  • M12 x 1 Housing Size
  • Nickel Plated Brass Housing Material
  • 15 m Cable Cable Connection
  • IP 67 Sealing Class
MF00006

Micanan Hex Head Bolt 1/4" - 20UNC 1/2" Full Thread

  • Used on various Micanan operators
  • 2 required per operator
SRB-1

Standard Riser Bracket for 6" Above Dock or Less 1"

  • Standard 1" Riser Bracket for 6" Above Dock Door or Less
  • Also available with 2" 3" & 4" Extensions or with Cutout - Call for More Information
E/1929/070

Automatic Systems Spare Arm 14'-9" (BL229)

  • Used on the BL229 gate op.
LB1212-24

Laminated Bumper Standard Black 12" L x 24" W 12" Projection Horizontal Installation

  • For use in low to medium traffic loading docks in factories and warehouses.
  • Can be used as rub rails at the sides of truck wells
  • Fabric reinforced rubber pads cut from recycled truck tires.
  • Rubber pads laminated between steel angles and secured with 3/4†rods
  • Bumper is fastened to dock surface with 3/8†steel angles and/or flat plates depending on the model chosen.
  • Wall mounting hole size is 7/8†diameter.
    • .......more details
LB1012-18

Laminated Bumper Standard Black 12" x 18" 10" Projection Horizontal Installation

  • For use in low to medium traffic loading docks in factories and warehouses.
  • Can be used as rub rails at the sides of truck wells
  • Fabric reinforced rubber pads cut from recycled truck tires.
  • Rubber pads laminated between steel angles and secured with 3/4†rods
  • Bumper is fastened to dock surface with 3/8†steel angles and/or flat plates depending on the model chosen.
  • Wall mounting hole size is 7/8†diameter.
    • .......more details
LB812-36

Laminated Bumper Standard Black 12" x 36" 8" Projection Horizontal Installation

  • For use in low to medium traffic loading docks in factories and warehouses.
  • Can be used as rub rails at the sides of truck wells
  • Fabric reinforced rubber pads cut from recycled truck tires.
  • Rubber pads laminated between steel angles and secured with 3/4†rods
  • Bumper is fastened to dock surface with 3/8†steel angles and/or flat plates depending on the model chosen.
  • Wall mounting hole size is 7/8†diameter.
    • .......more details
TVB436-11SF

Steel-Faced Laminated Bumper Black 5 1/4" Projection Vertical Installation 36" x 11" Sold Individually

  • Used on docks where excessive friction from up and down trailer movement occurs (yard jockeys air ride trailers etc.).
  • Can be used in material handling application where medium to heavy dock protection is required.
  • 5/8" anchor bolts mounted through pre-drilled holes into dock or can be welded to curb angle.
  • Steel face is 3/8" thick heavy duty high carbon steel that is mounted over a laminated dock bumper.
  • Plate to be welded to 2 or 3 steel support brackets which are to extend back to the 3/4" supporting rods.
  • Brackets to be punched with elongated holes to allow steel face to "float" upon impact.
    • .......more details
TVB420-11SF

Steel-Faced Laminated Bumper Black 5 1/4" Projection Vertical Installation 20" x 11" Sold Individually

  • Used on docks where excessive friction from up and down trailer movement occurs (yard jockeys air ride trailers etc.).
  • Can be used in material handling application where medium to heavy dock protection is required.
  • 5/8" anchor bolts mounted through pre-drilled holes into dock or can be welded to curb angle.
  • Steel face is 3/8" thick heavy duty high carbon steel that is mounted over a laminated dock bumper.
  • Plate to be welded to 2 or 3 steel support brackets which are to extend back to the 3/4" supporting rods.
  • Brackets to be punched with elongated holes to allow steel face to "float" upon impact.
    • .......more details
Drawing
TB410-24SF

Steel Faced Laminated Bumper Black 10" x 24" 5 1/4" Projection Horizontal Installation

  • Used on docks where excessive friction from up and down trailer movement occurs (yard jockeys air ride trailers etc.).
  • Can be used in material handling application where medium to heavy dock protection is required
  • “Gliding†heavy-duty steel face is 3/8†thick and independently anchored with elongated holes to face of bumper allowing bumper to compress AND offer high surface abrasion resistance
  • Rubber pads laminated between steel angles and secured with 3/4†rods
  • Bumper is fastened to dock surface with 3/8†steel angles and/or flat plates depending on the model chosen.
  • Wall mounting hole size is 7/8†diameter.
    • .......more details
K75-36914

LiftMaster Electrical Box Cover APT T GT SD GSD GH - L5

TB612-18SF

Steel Faced Laminated Bumper Black 12" x 18" 6 3/4" Projection Horizontal Installation

  • Used on docks where excessive friction from up and down trailer movement occurs (yard jockeys air ride trailers etc.).
  • Can be used in material handling application where medium to heavy dock protection is required
  • “Gliding†heavy-duty steel face is 3/8†thick and independently anchored with elongated holes to face of bumper allowing bumper to compress AND offer high surface abrasion resistance
  • Rubber pads laminated between steel angles and secured with 3/4†rods
  • Bumper is fastened to dock surface with 3/8†steel angles and/or flat plates depending on the model chosen.
  • Wall mounting hole size is 7/8†diameter.
    • .......more details
TB612-14SF

Steel Faced Laminated Bumper Black 12" x 14" 6 3/4" Projection Horizontal Installation

  • Used on docks where excessive friction from up and down trailer movement occurs (yard jockeys air ride trailers etc.).
  • Can be used in material handling application where medium to heavy dock protection is required
  • “Gliding†heavy-duty steel face is 3/8†thick and independently anchored with elongated holes to face of bumper allowing bumper to compress AND offer high surface abrasion resistance
  • Rubber pads laminated between steel angles and secured with 3/4†rods
  • Bumper is fastened to dock surface with 3/8†steel angles and/or flat plates depending on the model chosen.
  • Wall mounting hole size is 7/8†diameter.
    • .......more details
TB610-18SF

Steel Faced Laminated Bumper Black 10" x 18" 6 3/4" Projection Horizontal Installation

  • Used on docks where excessive friction from up and down trailer movement occurs (yard jockeys air ride trailers etc.).
  • Can be used in material handling application where medium to heavy dock protection is required
  • “Gliding†heavy-duty steel face is 3/8†thick and independently anchored with elongated holes to face of bumper allowing bumper to compress AND offer high surface abrasion resistance
  • Rubber pads laminated between steel angles and secured with 3/4†rods
  • Bumper is fastened to dock surface with 3/8†steel angles and/or flat plates depending on the model chosen.
  • Wall mounting hole size is 7/8†diameter.
    • .......more details
LB612-36SF

Steel Faced Laminated Bumper Black 12" x 36" 6" Projection Horizontal Installation

  • Used on docks where excessive friction from up and down trailer movement occurs (yard jockeys air ride trailers etc.).
  • Can be used in material handling application where medium to heavy dock protection is required
  • “Gliding†heavy-duty steel face is 3/8†thick and independently anchored with elongated holes to face of bumper allowing bumper to compress AND offer high surface abrasion resistance
  • Rubber pads laminated between steel angles and secured with 3/4†rods
  • Bumper is fastened to dock surface with 3/8†steel angles and/or flat plates depending on the model chosen.
  • Wall mounting hole size is 7/8†diameter.
    • .......more details
LB612-14SF

Steel Faced Laminated Bumper Black 12" x 14" 6" Projection Horizontal Installation

  • Used on docks where excessive friction from up and down trailer movement occurs (yard jockeys air ride trailers etc.).
  • Can be used in material handling application where medium to heavy dock protection is required
  • “Gliding†heavy-duty steel face is 3/8†thick and independently anchored with elongated holes to face of bumper allowing bumper to compress AND offer high surface abrasion resistance
  • Rubber pads laminated between steel angles and secured with 3/4†rods
  • Bumper is fastened to dock surface with 3/8†steel angles and/or flat plates depending on the model chosen.
  • Wall mounting hole size is 7/8†diameter.
    • .......more details
LB610-24SF

Steel Faced Laminated Bumper Black 10" x 24" 6" Projection Horizontal Installation

  • Used on docks where excessive friction from up and down trailer movement occurs (yard jockeys air ride trailers etc.).
  • Can be used in material handling application where medium to heavy dock protection is required
  • “Gliding†heavy-duty steel face is 3/8†thick and independently anchored with elongated holes to face of bumper allowing bumper to compress AND offer high surface abrasion resistance
  • Rubber pads laminated between steel angles and secured with 3/4†rods
  • Bumper is fastened to dock surface with 3/8†steel angles and/or flat plates depending on the model chosen.
  • Wall mounting hole size is 7/8†diameter.
    • .......more details
LLB420-22

Laminated Bumper Black 4" Projection L-Shaped 20" x 22" Sold Individually

  • For use in low to medium traffic loading docks in factories and warehouses.
  • Fabric reinforced rubber pads cut from recycled truck tires.
  • Rubber pads laminated between steel angles and secured with 3/4†rods
  • Bumper is fastened to dock surface with 3/8†steel angles and/or flat plates depending on the model chosen.
  • Wall mounting hole size is 7/8†diameter.
  • This model has angles on both sides
    • .......more details
2376.182.29.870

Whiting Torsion assembly .182 wire size 29" spring length 87" shaft

  • This is a full balancer assembly
  • Twin springs one road one curb with a shaft through it
MK-00805

Micanan Heater Probe in Reducer 24V 20W Brass Fitting Field Install

MD-00246

Double Sprocket 41B14 / 41A32 with 1" Bushing

  • Double sprocket for PRO-H/HB
TOP-BK-PCG

Powdercoated Commercial Top Bracket Adjustable 1-Bolt Grey

  • Powdercoated Grey
  • 12 gauge roller carrier and base plate
  • Adjustment of 7/16" minimum to 3-1/2" maximum
  • Good for use with 3" hardware
AIRSWITCH016

Fraba Air Wave Switch Only

  • Fraba air switch only
K32-8002

LiftMaster Gear Reducer

  • Also known as: 32-8000 G328001 32-8001 328002 328001 32-8002 G328002
MK-00030

Micanan Transformer 115V-24V-40VA

MF00007

Micanan Hex Head Bolt 1/4" - 20UNC 3/4" Full Thread

  • Used on PRO-GHC
  • 4 required per operator
MB-03202

Micanan Electric Motor Only 1 HP 575V 3PH Base Mount O.D.P FR56

  • Fits T TB APT APTC J EJ H EHJ HHD SD
9-22-1

Offset Strut Plate

BB-1

Rubber Button Cover Black for 3BLM PBS

  • Rubber button cover only
T-50-H

FL-Heddolf 1-btn Transmitter ID220-1KA-311 MHz ** Discontinued

  • Keystone-Heddolf single button FL T-50 compatible remote
  • 9 dip switch format
  • 9V battery and metal clip included
RCB-TIP

Roller Chain Break Replacement Tip Only *** NLA

  • Replacement tip only for RCB-2560
.331-6-R

Cut-to-Length Torsion Spring .331 x 6" Right Hand Wound Red/White

  • Priced per inch - cones and filler sold seperately
  • For factory installed cones use part no. C-600-INSTALLED
  • For spring filler use part no. SPRING-FILLER
WHITING-SPEC-ORD

Whiting Special Order Parts

  • Special order to customer's specs
BRACKET111

Manaras Hood Mount Angle Bracket

MP-00032

Micanan Center Mount Modification W/ No Chain Hoist PRO-J

  • Provides for center mount installation of a jackshaft operator
  • Operator output shaft is coupled in line with door shaft assembly
  • Couplings NOT supplied
  • NOTE: Reverse limit modification required
MP-00002-230V

Micanan Apartment Feature: Timer-to-Close Function and Light Control Modification only

  • Controlling action of two lights- sockets supplied on cover
BL229-EX1929/G45

Automatic Systems Rising Barrier Gate with 14'9" Round Arm Left Hand

MM00019

Micanan Disconnect Arm PRO-LJ

PRO-GHB50053-PNL

Micanan 5 HP 575V 3 Ph Gearhead with Brake No Controls

  • Special Order only
  • No controls in operator- separate panel is required
MGH-6214-ECB-LH

Manaras 1 HP 240V 1P Jackshaft with Elect. Circuit Board Left Hand

  • A very heavy-duty worm gear industrial operator designed for use on Industrial standard high and vertical lift sectional or rolling doors and grilles.
  • It incorporates a chain hoist for manual operation with a floor level engaging device with electrical cut-out
  • Electrically activated drum-band type solenoid brake
  • Full overload protection
5001-16-WHITE

Residential Side & Top Weather-Strip 16' Long - White

  • Painted aluminum retainer with flexible dual fin vinyl.
  • Residential use.
MGH-6214-CONT-LH

Manaras 1 HP 240V 1P Jackshaft Contactor Left Hand

  • A very heavy-duty worm gear industrial operator designed for use on Industrial standard high and vertical lift sectional or rolling doors and grilles.
  • It incorporates a chain hoist for manual operation with a floor level engaging device with electrical cut-out
  • Electrically activated drum-band type solenoid brake
  • Full overload protection
1003-5"-PER-FT

Bottom U-Rubber 5" Black Sold per Foot

5-30-8A

3" Vertical Track 12-GA 14'-4" (15' door) Sold per Pair

  • Pierced track
GMA-3A-5PKG

Fuse Mini Fast-Acting Glass Fuse 3A 250V 5mm x 20mm

  • 5 per pack
SPRING002

Manaras Brake Spring

MT21-YELLOW-RH

Miller Edge 2-Wire Pressure Sensitive Edge Yellow Right Hand Outlet Sold per Foot

  • €¢Electromechanical medium profile edge for rolling fire door applications. •Touch sensitive signaling allows for immediate reversing or stopping of motion. •The MT21 is completely felixible and will contour to curved surfaces. The MT21 will also act as weatherstrip. •Temperature range: -30F to 155F •Lead wire: 22 gauge universal •Sensitivity: nominal 6-8 PSI •2 wire NO configuration •Horizontal mount •ANSI/UL325 recognized component •One year warranty
WorksheetInstallation manual
OTBH-6212-CONT

Manaras Trolley Operator 1/2 HP 240V 1Ph Contactor Model

  • The OTBH is a heavy-duty low headroom trolley operator
  • Designed for use on industrial standard lift sectional doors
  • It incorporates a drum-band type solenoid brake
  • 25 cycles per hour 80 cycles per day
  • 1/2 HP operators come with # 48 (410) roller chain