Devanco Canada - Get The Right Garage Door Opener‎ and Parts

87-P-062

LiftMaster Push Ring Fastener 5/8" Int

Same as: 87P062 K87-P-62 87-P-062
Used on LiftMaster brake assembly

HARNESS099

Manaras Opera ECB070 12 Pin Conn Wiring Harness

HYBRID-BLK-12

Residential Side & Top PVC/Aluminum W/S with cap 12' Long (145") - Black

Black rigid vinyl retainer with aluminum cap and black flexible vinyl seal.
Dual fin vinyl.
Comes with aluminum slide-on cap to hide screws.

GAREX-PVC-W-10

Residential Side & Top PVC Weather-Strip with cap 10' Long (121") - White

White rigid retainer with white flexible vinyl.
Dual fin vinyl.
Comes with snap-on cap to hide screws.

GAREX-PVC-W-8

Residential Side & Top PVC Weather-Strip with cap 8' Long (97") - White

White rigid retainer with white flexible vinyl.
Dual fin vinyl.
Comes with snap-on cap to hide screws.

041D8227

LiftMaster Wiring Harness

For use with various LiftMaster® Chain Drive Garage Door Openers.

21-35057

LiftMaster Transformer 460V 24VAC 40VA

575V PRIMARY 24V SECONDARY
Same as K21-35057

MO00006

Micanan Gearhead Disconnect Spring

Dimensions: 0.92ID x 0.09G x 2.00"L

821LMB-2SENSOR

LiftMaster MyQ Smart Garage Door Add-On Sensor Backwards Compatible

This add-on door sensor works with the myQ Smart Garage Hub to monitor and control a second garage door opener.
This version of the myQ door sensor is only compatible with the new myQ Smart Garage Hub by LiftMaster Model 821LMB
Replaces both 821LM-SENSOR and 821LMB-SENSOR and can be used as a replacement for either one
Also known as: 821LM-SENSOR 041D7924-1

SPR410B9X5/8

Sprocket 410B9 x 5/8 K3/16 2S 1/4-20 CR

540.1000.00

Whiting Cold Saver Premium Topcoat Paint Option White

Option for Cold Saver Doors

CABLE_516SS-500

Cable 5/16" 7x19 500' Stainless Steel

426-0913

Richards-Wilcox Galvanized End Cap T175-24" LH

K23-20523

LiftMaster Interlock Switch 125/250VAC 3A N4

For use with various LiftMaster® Commercial Door Operators

19-40HL-NP

Half (Offset) Link #40 Nickel Plated

For #40 chain

ALUM-322

Aluminum 24" x 100' Spool Red # 322

20% thicker than the aluminum sold in retail stores (0.022" )
Gentek # 322
Reverse side is #431 Bright White

Colour chart

BOARD003

Manaras Repl. Circuit Board MA-50 110V Lite Duty

Used on model MDTB

XAC-A

Schneider Pistol Grip Pendant Station Yellow

2 push buttons 1 emergency stop
Coil cord not included

BEARING047

Manaras Flange Bearing 2-Bolt Black for 1' bore

2 set-screw holes 1/4-28 at 90 degrees. Set-Screws NOT included
Replaces BEARING012

SPR50B36X114

Sprocket 50B36 1-1/4" shaft 1/4" KW

36 tooth sprocket for #50 chain
Does not have any set screws

MEL-II-TX10

Miller Edge Monitored Edge Link-II Transmitter

Miller Edge Monitored Edge Link II TRANSMITTER ONLY
Monitors the presence and function of any 10K (T2) monitored sensing edge
Provides a monitored wireless signal transmission from the sensor to the operator controls
Improved immunity to RF interference with 916 MHz operating frequency
Eliminates visible coil cords and retracting reels
Saves installation time

.......more details

XBA18

NICE Indicator Lights for L-BAR Arm 26.2ft

The Nice Apollo XBA18 is a 26.2 ft long line of indicator lights for the click fixture on the upper or lower side of the barrier arm of the L-Bar barrier gate openers.

Q410

LiftMaster Surge Protector K70-51060

Most commonly used with LiftMaster® SL3000 & CSW200 Models.

MF00045

Micanan H.H Slotted Self Rounding Washer Head Screw 8-32UNF x 3/8"

MCJH-34-115-CON-R

Lynx MCJH Heavy-Duty Jackshaft 3/4 HP 115V Contactor Right Hand ** Replaced by CDJH

Built-in 3-channel 372 Mhz radio receiver accepts up to 20 remotes
4L V-belt primary reduction #41 drive chain and sprockets.
Adjustable friction clutch magnetic solenoid brake.
Fully driven adjustable limit switches.
Heavy duty 3 button wall station (Open Close Stop).
Adjustable spreader bar assembly included.

.......more details

41A6348-3

LiftMaster Cover RJO

Same as 41A6348-1

BCH505L5-LH

LiftMaster Hoist Op. with Carwash Mod. 1/2 HP 575 VAC 3 Ph L5 Left Hand

Industrial Duty Hoist Operator with Damp Environment modification
Comes with CPS-UN4 photoeyes
External brake included

.177_2"-LH

Torsion Spring .177 x 2" x 12ft LH Gold

Wire size: .177
Inside diameter: 2"
Length: 12 ft

MA020

LiftMaster Mega Arm Replacement Cover

MA-020 is a Mega Arm Replacement Cover.
Compatible with LiftMaster® Mega Series (MA/MAS) Commercial Gate Operators ONLY

K20-3075B-4P-H24

LiftMaster Electric Motor 3/4 HP 230/460V 3P L5

This is a replacement Motor Kit (3/4 HP 230/460V 3PH L5).
Compatible with various LiftMaster® Logic 5.0 Standard-Duty Belt Commercial Door Operators

14-1002

PVC Roll 8" x .120" Standard Smooth 200' for Replacement Strip Curtain

Suitable for most average applications.
Temperature Range: -20°F to 150°F (-28° C to 66° C).
Formulated with ingredients that meet USDA requirements for incidental food contact.

41D9204

LiftMaster Wire Harness LED

Same as 041D9204

MITIS-R16

Garex Ready to Install Door Special Order

R16 Insulation - Overlay moldings positioned to create the Mitis design - Moldings are factory white or can be factory painted to match door colour - Optional decorative hardware is available - Available in steel (std colours) or aluminum (white and grey) - A variety of decorative windows can be added - Custom colours can be factory painted - Multiple hardware configurations are available to accomodate site requirements - Composite end blocks eliminates corrosion and wood deterioration

MONTARVILLE-R16

Garex Ready to Install Door Special Order

R16 Insulation - Overlay moldings positioned to create the Montarville design - Moldings are factory white or can be factory painted to match door colour - Optional decorative hardware is available - Available in steel (std colours) or aluminum (white and grey) - A variety of decorative windows can be added - Custom colours can be factory painted - Multiple hardware configurations are available to accomodate site requirements - Composite end blocks eliminates corrosion and wood deterioration

VERMONT-R12

Garex Ready to Install Door Special Order

R12 Insulation - Short Panel with vertical lines carriage style - Panels are spaced to not allow for decorative handles - Decorative hinges can be used - Available in steel white or black - A variety of decorative windows can be added - Custom colours can be factory painted - Multiple hardware configurations are available to accomodate site requirements

GX-175-A-R16

Garex Ready to Install Door Special Order

R16 Insulation - 2 wide shadow lines at the top and bottom of each panel - Available in Aluminum (white and grey) - A variety of decorative windows can be added - Custom colours can be factory painted - Multiple hardware configurations are available to accomodate site requirements - Composite end blocks eliminates corrosion and wood deterioration

QUANTUM-R16

Garex Ready to Install Door Special Order

R16 Smooth Finish - Available in 20 GA steel white only - Multiple hardware configurations are available to accomodate site requirements - Composite end blocks eliminates corrosion and wood deterioration

PREM-SEL-MX-R16

Garex Ready to Install Door Special Order Premium Select MX R16

R16 Insulation - Mix of short and long panels - Available in steel (std colours) or aluminum (white and grey) - A variety of decorative windows can be added - Custom colours can be factory painted - Multiple hardware configurations are available to accomodate site requirements - 7' to 9' wide doors will have 1 short and 1 long embossment - 10' to 11' wide doors will have 2 short and 1 long embossment - 12' to 18' wide doors will have 2 short and 2 long embossments - Composite end blocks eliminates corrosion and wood deterioation

2806.187*300

Whiting .187 x 2-3/16 x 30" Roadside with Cones

2807.187*300

Whiting .187 x 2-3/16 x 30" Curbside with Cones

CP-PW-NM-MCJH

Lynx Pocket Wheel for MCJH 6"x1" Bore Long Hub

26-40019

Truck Door Bottom L-Retainer 90" Long for Todco Roll-Up Doors

Galvanized steel construction for extra strength and corrosion resistance.
Fits both standard and heavy-duty bottom seals.
Pre-punched holes for added convenience
Cross Reference: T #61191 W #4034 260000

20449R

Genie Chain Glide Rear Housing Cover

Compatible with models: PCG400 PCG450 PCG500ML PCG600 PCG700ML PCG700FN GCG350L GCG350ML H2000C 1020L 2020L
Contains gear housing cover only

MIRF-T2

Miller Edge Patriot 2 Photo Eye Non-Monitored 30ft Non-Contact

Attaches directly to a Sectional door.
The photo eyes travel below the door during the closing cycle.
Unlike traditional static mount photo eyes; Patriot travels with the door sensing obstructions prior to contact.
The Patriot2 non-contact system consists of thru beam photo optics.
Emitting and receiving eyes mount into a rigid steel spring loaded retracting housing.
The housings attach to the bottom section of the door and extend below the leading edge of the door providing an invisible infrared light beam of protection.

.......more details

IRB-SH-SET

EMX Industries Steel Protective Hoods Only Grey Powder Coat Pair

Includes 2 hoods
Powder-coated steel construction
Compatible with EMX IRB-MON EMX IRB-4X safety photo beam sensors
Each hood fits easily over gate/garage door opener sensor

BEARING051

Manaras Flange 2-Bolt Flange Bearing ID 5/8" Black

2 set screw holes 1/4-28 at 90 degree NO Set Screws provided
The original set screws are to be re-used

41D9044

LiftMaster Battery/ Logic Board Cover RJO

Compatible with 8500 and 8500W

HA-3001

Hose Anchor for Treadle Hose

Made of cast iron

K107A0031

LiftMaster Replacement Keys (2) for KPW5 KPW250

Replacement keys only

1013-1-1/4-18'

Rigid Vinyl Bottom Retainer L-Shaped 18' Long

For door thickness: 1-1/4"

LA500SLRHARN

LiftMaster Solar Harness Kit LA500

M-0133

Autogate Proximity Magnets

.192_2-3/16_60R

Spring Wire .192 x 2.188 x 60" CTD RAW RH

.192 x 2-3/16" x 12'

MOTOR255

Manaras Electric Motor 3/4HP 120/240V 1PH

41D0216-2

LiftMaster End Panel with Light Socket

Compatible with LiftMaster® 8550WL & 8360WL Models; and various garage door openers manufactured after 2017 only
Circuit board not included

C-24X10-134-W

Thermal Window 24" x 10" for 1-3/4" Door White

For 1-3/4" thick door

85503-267

LiftMaster Belt Drive DC Battery Backup Wi-Fi W/Camera w/extra remote (893MAX) and keypad (877MAX)

Integrated Camera. Camera manually adjust 360 degrees to see everything that happens in the garage
HD-Quality Video. Glare-resistant night vision lens auto-adjusts to light levels in the garage to capture everything and anything that passes through the garage
Live Streaming and Video Storage. View a live-stream of your garage for free. 7-day and 30-day video storage options are available via a monthly subscription.
2-Way Audio. Communicate in real time between your garage and your smartphone
MyQ Technology now with Wi-Fi® enables secure monitoring and control of your garage door opener with a smartphone tablet or laptop.
DC Motor Belt System delivers powerful ultra-quiet performance.

.......more details

Installation manual Manuel d'installation Sell sheet Receiver Logic Board Conversion List

MOTOR359

Manaras Electric Motor 1 HP 208/480V 3Ph

Continuous duty C-flange ODP 60Hz

26117

Doorlec Limit Cam Retainer Plate

Fits Most Doorlec Commercial operators except Explosion-Proof Operators
Will not fit on waterproof operators with small electrical enclosure built before 1999

CP-MO-34-123/1

Lynx Electric Motor 3/4 HP 115/230V 1 Ph

Electric motor only

MG020-B-4E-P/FT

Miller Edge Sensing Edge Black 4-Wire Monitored End Outlet Sold per Foot

Electromechanical slide in edge with a small profile for motorized gates and doors rolling shutters and pinch point protection applications.
Touch sensitive signaling
Temperature range: -30F to 155F
Lead wire: 18 gauge 2ft length
Sensitivity: nominal 4 PSI
2 wire NO configuration

.......more details

3BX

Control Station Exterior Surface Mount O/C/S N4 Metal Enclosure

Metal Enclosure
Buttons aligned in a triangular pattern
H=4-3/8" W=4-1/8" D=2-5/8"
2 NO contacts and 1 NC (stop)
Nema 3R 4 12

3BX

902-T-7X9-VL

Hardware Set 3" Industrial 902-T for 7' x 9' VL

A variety of options and sizes are available call for quote
Set includes tracks HD rollers hinges solid shaft drums cables springs and struts if applicable.

60-6560-A-YELLOW

Speed Bump Yellow 36" Econo Light Weight for Asphalt **** NLA

A standard speed bump system section includes (2) main pieces (2) endcaps x 5” long and (1) connector clip.
Main pieces may be added and connected to form larger units.
36” long x 10.5” wide x 2” high (main piece)
EndCap: 5” Safety Snap On End Cap - sloped modular profile prevents tripping by pedestrians.
Yellow Plates: Each speed bump section is embedded with (6) yellow safety plates of weather resistant composite material for protection from salt freeze and thaw.
Can be used as a cable cover - bottom sides include 1” x 1½” channels for protecting temporary or permanent cables or hoses.

.......more details

60-6550-A-BLK

Speed Bump Black 36" Econo Light Weight for Asphalt *** NLA

A standard speed bump system section includes (2) main pieces (2) endcaps x 5” long and (1) connector clip.
Main pieces may be added and connected to form larger units.
36” long x 10.5” wide x 2” high (main piece)
EndCap: 5” Safety Snap On End Cap - sloped modular profile prevents tripping by pedestrians.
Yellow Plates: Each speed bump section is embedded with (6) yellow safety plates of weather resistant composite material for protection from salt freeze and thaw.
Can be used as a cable cover - bottom sides include 1” x 1½” channels for protecting temporary or permanent cables or hoses.

.......more details

CP-IDLER-ASY-MCBH

Lynx Front Idler Assembly Commercial MCBH

112357.0001

Overhead Logic Board for RSX 3/4 & 1HP 1PH

Fits OPRSXH75015BR GCL-H

RELAY008

Manaras Relay AB 700-HA33A24 11 Pin TP

Allen Bradley

109904

Amarr Snap Latch Supply Bag for 2" Thick Doors

Is needed when 105380: T-Handle Lock Kit for 2" thick doors is order or the lock won't work.

P-0129/RH

Autogate Retro Bracket Right Handed System

This is needed to change over to their current motor

MV00210

Micanan Banner Reflector 3"

Compatible with Banner #MV-00300 reflective photocell

MQ00008

Micanan Set Screw 5/16"-18 x 5/16" Long

7001-12-ANODIZED

Commercial Side & Top Weather-Strip 12' Long - Anodized 7001-AB

Anodized galvanized steel with black dual fin vinyl.
Commercial and Residential use.
Steel is notched on both ends for easier installation.

7001-9-ANODIZED

Commercial Side & Top Weather-Strip 9' Long - Anodized 7001-AB

Anodized galvanized steel with black dual fin vinyl.
Commercial and Residential use.
Steel is notched on both ends for easier installation.

PRO-GH-15011U-RH

Micanan 1.5 HP 115V 1P Gearhead Operator N1 Eyes Monitored ECB Right Hand

Includes 3-btn O/C/S control station Nema 1
External radio control terminal strip
Heavy duty worm gear reduction in oil bath gearbox
Solenoid brake standard
#50 roller chain and sprockets on final drive
Emergency chain hoist with electrical cut-out switch for manual operation

.......more details

C-24-12-2-BLK-TINT

Thermal Window 24"w x 12"h for 2" Door Black Tinted Grey Glass

For 2" thick door

41A5635A

LiftMaster Receiver Logic Board 390 MHz ** To extent of inventory

Compatible with a number of dual capacitor chain drive models including 2575 2585 2595 PD752 and PD758S manufactured between 2001 and 2005
Also known as: 41A5483-15 41A5635 01A5635A

31118

Doorlec Sprocket 41B12-5/8" Plain Bore

Plain bore no keyway

LJH-353-3/4

Doorlec 3/4HP 575V 3PH Jackshaft Operator

Technical information

515.06000R01

NICE Octagonal adaptor 60x(0.6/1) Wheel + Crown

SPR41B36X11/4

Sprocket 41B36 x 1-1/4" Bore 1/4" Keyway

Same as MD-00322

ME112-C3

Miller Edge L-Shaped PVC Mounting Channel Sold by the Foot

SHAFT120

Manaras Input Shaft for OSHW

27120

Doorlec Electric Motor 1/2HP 208/480/575V 3PH DC221

16-4L280

LiftMaster Vbelt 4L 28" **to extent of inventory

Compatible with LiftMaster® Model SW490GL Swing Gate Operators

K20-1100-1T

LiftMaster Electric Motor 1/2 HP 115V 1Ph TEFC **DISCONTINUED

Compatible with LiftMaster® Model SW490GL Swing Gate Operators
Also known as: 20-1100-1T 2011001T G2011001T

H8NA12

Richards-Wilcox Hinge 8NA x 12 Gauge Roller Bracket

Galvanized 12 gauge hinge

CGH203L5-LH

LiftMaster Gearhead with Brake & Carwash Mod. 2 HP 208/230/460V 3P L5 Left Hand

Gearhead style commercial door operators employ lubricated gears for heavy industrial high cycle applications.
GH-style operators include a floor level chain hoist to ease manual operation in an emergency or power outage.
Hoist wheel is easily moved to Right or Left hand side of unit eliminating the need to order right or left hand mounting.
MyQ Technology enables you to securely monitor and control your facility operator with your smartphone tablet or computer. Internet Gateway 828LM required.
Security +2.0 radio receiver safeguards your facility - with every click a new code is sent to the commercial door operator so the door opens only for you.
Timer-To-Close: Conveniently and confidently closes the commercial door automatically after a predetermined amount of time has elapsed for added security and peace of mind.

.......more details

EPC-1

Accessory Hardware Kit for Gate Track for 3-1/2" Pipe *** Price by Quote Only

Includes guides rollers & hardware

J505L5

LiftMaster Industrial-Duty Jackshaft 1/2 HP 575V 3Ph L5

Doors used with this operator should be balanced with the ability to be manually lifted by hand in an emergency or power outage.
The operators are typically mounted to the wall when used with smaller sectional overhead doors with a vertical or high lift and mounted to the wall or the front of the hood when used with rolling doors and grilles.
J operators are attached to the door jackshaft to indirectly drive the door
MyQ® Technology enables you to securely monitor and control your facility operator and lights with your smartphone tablet or computer for greater peace of mind.
Security+ 2.0® safeguards your facility – with every click a new code is sent to the commercial door operator so the door opens only for you

0/7530/248

Automatic Systems 5/8 Right Hand Rod End with Zerk

Used on the BL229 gate op.

ME123-2M-BLK-LH

Miller Edge Black LH 2-Wire Monitored 2" wide x 1-1/2" high Sold by the Foot

Electromechanical slide in edge for sectional doors and sliding gates.
Touch sensitive singaling allows for immediate stopping and reversing of motion
Temperature range: -30F to 155F
Lead wire: 22 gauge universal
Sensitivity: nominal 6-8 PSI
2 wire NO configuration

.......more details

Worksheet Installation manual Sell sheet

ULTRA-DIN

EMX Industries DIN Rail Mount Vehicle Loop Detector

Ignores cross traffic in tight spaces with DETECT-ON-STOP™ feature
Easy to install and setup with the ULTRAMETER™ sensitivity display
Low current draw – green product
Easy identification of interference problems using the crosstalk and RFI interference display
Fits into small operator housings saving space size: 80 x 23 x 84 mm
10 sensitivity settings

.......more details

RS2910B

Roller 2" Steel 9" stem 10 ball

Steel Roller Wheel Diameter: 2"
Working Length: 8.41" Overall Length: 9.46"
Head and Stem Finish: Bare
Shoulder: Bulged stem
Rating: 15000 cycles of a 12' door
Load: 75LB

.......more details

MIRCU-02

Miller Edge Universal Non-Monitored Interface

Converts a monitored pulsed signal to a non-monitored normally open signal
Creates a Fail Safe signal; reports a fault when power is lost
Ideal for use with pre-2010 commercial door operators

Installation instructions Sell sheet

MTR1

Linear 1-Channel Visor Transmitter 318MHz *** To Extent of Inventory

Activates one MegaCode receiver
Test/operate LED
Visor mounting clip supplied
Visor clip mounts vertical or horizontal
Power: One 2032 battery
Codes: 1000000+ (MegaCode format)

.......more details

Programming instructions Instructions de programmation

4JW-LEFT

Rolling Steel 3" Curved Cast Windlock 273002 LH

Windlocks are especially used on rolling steel doors and shutters to prevent "blow-ins" from severe storms or winds.
A wind lock is a small metal device that is attached to each slat.
Its primary function is to reduce the amount of friction that occurs between the actual door & the guiding panel.
When the wind is strong the roller door may be dislodged bent or misaligned from the guide.
With a windlock your door can operate efficiently despite wind load or pressure.
Windlocks are easy to add on to any existing rolling steel or shutter door

.......more details