Devanco Canada - Get The Right Garage Door Opener‎ and Parts

5001-9-BLACK

Residential Side & Top Weather-Strip 9' Long - Black

Painted aluminum retainer with flexible dual fin vinyl.
Residential use.

K12-8034

LiftMaster Female Rod End LH

Upper rod end for BG770 BG790
Same as part # 12-8034

K20-3050B-4P

LiftMaster Electric Motor 1/2 HP 208/230/460V 3Ph L3 L4 Contactor

Standard 1/2 hp motor
Same as 20-3033-1

60-7254

Wheel Chock Wall Bracket Anchors 4/pkg 3/8" x 1-7/8"

Anchors only. Set of 4

SA-TORSION-ASSY

Complete Torsion Assembly Special Order

Special order

SA1906/031

AS1320 Logic with Top Cover Assembly BL3X SAV

1104-12FT-BRONZ

Residential Side & Top PVC Weather-Strip with cap 12' Long - Bronze (F)

Bronze rigid vinyl retainer with bronze flexible vinyl seal.
Dual fin vinyl.
Comes with cap to hide screws.

201-300-411-00

Equinoxe Long Range Transmitter O/C/S for 16-Doors 433 MHz Pre-2016

Open/Close/Stop remote for 16 doors
Range of approx. 1000ft
A heavy-duty remote for Industrial applications
Old generation - prior to 2016

Programming Instructions Instructions de programmation

15-50B12LGH

Sprocket 12 Teeth 1" Bore 1/4" Keyway

Same as 50B12x1

PRO-HBH-10023U-L

Micanan 1 HP 230V 3P Heavy-Duty Jackshaft N1 Eyes Monitored ECB Left Hand (Pro-HHD)

1 HP230V 3 PH Industrial Continuous Duty Jackshaft Operator Ideal for Sectional Doors Rolling Steel
Monitored logic board with integral 372Mhz radio receiver that can hold up to 20 transmitters (MK-00647/ MK-00653/ MK-00659) or 200 of the 1 channel hand held transmitters (MK-00660).
N-1 Through-beam (MK-00649) photocells included. Other options available.
3-btn o/s/c (02-103) wall control station included
Adjustable Friction Clutch 5L320 drive belt
#50 Roller chain 18 tooth door sprocket included

.......more details

LVB620-11

Laminated Bumper Black 6" Projection Vertical Installation 20" x 11" Sold Individually

For use in low to medium traffic loading docks in factories and warehouses.
Can be used as rub rails at the sides of truck wells
Fabric reinforced rubber pads cut from recycled truck tires.
Rubber pads laminated between steel angles and secured with 3/4” rods
Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
Wall mounting hole size is 7/8” diameter.

.......more details

27-20003

Truck Door Dual-Spring Shaft 87" for Whiting Roll-Up Doors

Constructed of 1" outside diameter heavy-duty steel tubing
Holes drilled in one end only for cotter pins the other end is not drilled for flexibility
Cross Reference: W #2528

5735.96

Whiting Bottom Seal Grey 96"

For Dry Freight and Truss Doors

CS303-FP-100

EMX Car Sense Direct Burial Sensor Flat Pack 100ft *** Replaced by LRS-FP-100

Lead probe ONLY. Requires the CS303-C-1 detector.
Easy installation above or below ground
Ignores cross traffic in tight spaces with DETECT-ON-STOP™ feature
Sensitivity display
Single cut installation with flat pack model

C16-32FHD

Bearing 1" x 2" Press Fit Heavy-Duty

Flanged ball solid steel bearing
Rating: 1 000 000 revolutions
Axial load: 150lb max
Radial load: 900lb max

TAOS141W

Stainless Hinge Tek Screw 1/4" x 1" Self-Driller with Washer

Priced per each

MCJH-453-CONT-R

Lynx Heavy-Duty Jackshaft 3/4 Hp 575V 3 Ph Contactor Right Hand ** Replaced by CDJH

Sell Sheet

PVD-ARM-ALUM-16

Aluminum Gate Arm 16' 1" x 3.5" with Reflective Band

MU22-2WIRE-E-B

Miller Edge MU22 2-Wire End Black - Sold per Foot

��Electromechanical edge for sectional doors and aircraft hangars. •The MU22 is a custom edge manufactured to exact specifications. •The MU22 is completely flexible and will contour to curved surfaces. It's profile can also be square rectangular or angled. •Touch sensitive signaling allows immediate reversal or stopping of motion. •Temperature range: -30F to 155F •Lead wire: 22 gauge universal •Sensitivity: nominal 6-8 PSI •Vertical or horizontal mount •ANSI/UL325 recognized component •One year warranty

Worksheet Installation manual Sell sheet

4170015

FAAC 400 End Cap for Cover

19-5112-NP

LiftMaster Trolley Roller Chain Pack #41 for 12ft Door Nickel Plated

For 3/4 & 1 HP trolley operators

OSH-6533-ECB-LH

Manaras Opera-SH 3/4 HP 600V 3 Ph with Electronic Circuit Board Left Hand

An ultra high-end heavy-duty V-belt drive industrial jackshaft operator
For use on Standard High and Vertical Lift sectional doors
Can also be used on Rolling doors and Grilles
Comes with a chain hoist for manual operation and a floor level engaging device
Clearence: side room required 16"

Installation manual Sell sheet

OSH-6113-CONT-L

Manaras Opera-SH 3/4HP 120V 1Ph with Contactor Left Hand

An ultra high-end heavy-duty V-belt drive industrial jackshaft operator
For use on Standard High and Vertical Lift sectional doors
Can also be used on Rolling doors and Grilles
Comes with a chain hoist for manual operation and a floor level engaging device
Clearence: side room required 16"
25 cycles per day > 100 cycles per day

.......more details

Installation manual Sell sheet

17-2701

LiftMaster Pulley 7" x 5/8" (G172701)

Same as G172701

MGS20-Y-2U-04

Miller Edge Sensing Edge Square Yellow 2-Wire Universal Outlet 4ft Long

��Electromechanical edge for standard 2" round or square frame sliding sing and bi-part gates. •3-sided activation allows for immediate stopping or reversing of motion •Contours to round or square posts. •Temperature range: -30F to 155F •Lead wire: 18 gauge 2ft length •Sensitivity: nominal 6-8 PSI •2 wrie NO configuration •ANSI/UL325 recognized component •Cannot be bent •One year warranty

CABLE_316SS5000

Cable 3/16" 7x19 5000' Stainless Steel ** Price on request

Comparison charts

PRO-HBH-7523U-R

Micanan 3/4HP 230V 3P Heavy-Duty Jackshaft N1 Eyes Monitored ECB Right Hand (Pro-HHD)

3/4 HP230V 3PH Industrial Continuous Duty Jackshaft Operator Ideal for Sectional Doors Rolling Steel
Monitored logic board with integral 372Mhz radio receiver that can hold up to 20 transmitters (MK-00647/ MK-00653/ MK-00659) or 200 of the 1 channel hand held transmitters (MK-00660).
N-1 Through-beam (MK-00649) photocells included. Other options available.
3-btn O/S/C (02-103) wall control station included
Adjustable Friction Clutch 5L320 drive belt
#50 Roller chain 18 tooth door sprocket included

.......more details

053156

Magnetic Mount Micro Dome Beacon Amber ** To Extent of Inventory

60 LEDs 360 degree revolving flash / intermittent flash
-30 degree celsius to + 50 degree celsius extreme temperature reliability

TC3-411

Lynx Commercial Trolley Op. 3/4HP 120V for 14' High Door with Brake Contactor

Sell Sheet

K20-5150LD

LiftMaster Electric Motor 1/2HP 120V MT/MH Motor

MOTOR403

Manaras Electric Motor 1/2HP 120V 1PH

Instant reverse
Medium-duty 1500 rpm
For OMJ/OMH

SF375-114

Spring Fitting 3-3/4" Pair (Long Ear) 1-1/4" Bore

Universal thread for use in either LH or RH wound springs.
Pair includes: (1) winding & (1) stationary.
Maximum wire size diameter: .4062".
Set screw installed: 3/8"-16 x 1-1/2" (2).
Mounting: 1-1/4" solid shaft
3-3/4" fittings can be combined with 6" spring fittings for duplex assembly.

.......more details

1104-9'-DK-SAND

Residential Side & Top PVC Weather-Strip with cap 9' Long - Dark Sandstone (DDG)

Garaga dark sandstone rigid vinyl retainer with Garaga dark sandstone flexible vinyl seal.
Dual fin vinyl.
Comes with cap to hide screws.

.250-334-R

Cut-to-Length Torsion Spring .250 x 3-3/4" Right Hand Wound Green

Priced per inch
For factory installed cones priced seperately - use part no. C-375-INSTALLED

MK-00011

Micanan Radio Control Terminal Strip

MO00003

Micanan Compression Spring for PRO-H/HB

0.80 ID x 0.092G x 1.80 Long

10-10875

LiftMaster Disconnect Lever H MH J **to extent of inventory

OSH-6233-CONT-R

Manaras Opera-SH 3/4 HP 208V 3 Ph Contactor Right Hand

An ultra high-end heavy-duty V-belt drive industrial jackshaft operator
For use on Standard High and Vertical Lift sectional doors
Can also be used on Rolling doors and Grilles
Comes with a chain hoist for manual operation and a floor level engaging device
Clearence: side room required 16"
25 cycles per day > 100 cycles per day

.......more details

Installation Manual Sell Sheet

K72-19975

LiftMaster Clutch Shaft and Sprocket Assembly

Assembly includes: Clutch shaft 1" keyed flange bearings Dual sprcket 32/14 Splined core sprocket E-ring Compression spring Pulley assembly Washers Thrust bearing Retaining ring Slined hub and roll pin
Compatible with DJ J operators

CONTACTOR008

Reversing Contactor Struthers Dunn 115VAC

CPT-210-K5

Miller Edge Non-Monitored End Plug Kit *** Discontinued

For use with CPT-210-50 bulk extrusion
Kit includes: 5 wired 5 non-wired end-plugs 1oz tube of adhesive

7001-WG-10-CO

Residential Wood Grain Side & Top W/S Cherry Oak 10' Long - Painted Screws to Match

Cherry Oak retainer with Cherry Oak vinyl
PVC Wrapped
Steel is Notched on Both Ends for Easier Installation
Economical
Dual Fin Vinyl
Painted Screws to Match

.......more details

BP-BE102BP

Contact Block Base Mount NC Contact

For use with RC P enclosures. IP65

26CW94522

Truck Door Intermediate Panel (12" x 98") Painted White for Whiting Dryfreight

These panels are cut to an extra wide width to fit wider vehicle applications.
Interlocking tongue and groove design for weather-tight joint and proper panel alignment.
3/4" thick 7 ply exterior grade medium density plywood.
Painted white

.295-334-R

Cut-to-Length Torsion Spring .295 x 3-3/4" Right Hand Wound Blue

Priced per inch
For factory installed cones priced seperately - use part no. C-375-INSTALLED

K23-19380-2

LiftMaster Reset Switch Kit for Miracle-One

Reset switch and Harness

MHH-002

Magnetic Handle Set Black Set of 2

Decorative handles only
Black flexible magnetic material with deep embossed design
Mounts flush on door
Sold as a set of 2 handles

18-MAG-STRAP

Magnetic Hinge Strap 18" Black Set of 4

Decorative hinge strap only.
Black flexible magnetic material with deep embossed design

25-2015

LiftMaster 15 Amp Overload Fuse

For models: SL585-100-11 SL595-100-11 SL575-100-11

MAW123-BLK-LH

Miller Edge Air-Wave Edge Black Sold per Foot

This pressure sensitive air-wave edge can be adapted to suit a wide variety of applications.
When touch activated the MAW123 sends an immediate pulse of air through the extrusion to an air-wave switch which sends a signal to controls to stop and/or reverse operations.
It has been designed to fit most doors with double track bottom retainers.
With appropriate mounting channel this edge will fit nearly all doors from 11/2" to 2" thick.
The MAW123 is resistant to flame water and most common greases and oils.

4-11-7R

Roller 3" 10-Ball 7" Stem Nylon

Sealed bearing for long life in dusty conditions
7" stem (working length = 6 1/8")

HSCC112

Hinge Combination Hinge Clopay Style 12-ga Stainless Steel

Manufactured with Heavy Duty 12ga. Rust-Resistant 304 Stainless Steel
Laser Cut for a Clean Finish

MO00001

Micanan Cam Plate Compression Spring (.178 ID)

2 required per operator
.178 ID x 032G x 55L)

MJ00004

Micanan Clutch Plate Aluminum 3/4" ID

MK00737

Micanan Feature Circuit Board with Contactor Interface Non-Monitored 575V **use MK00642-NM

For all HP - 575V all voltages 1.5 2 3 & 5HP
Non-Monitored

Instructions Manual

2235.296-CUT

Whiting Coldsaver Bottom Panel 14-1/2" x 94-3/4" with lock Topcoat Long Pull Strap & SS package

Fits Coldsaver Roll-Up Doors
1-1/8" thick 96" wide
Includes Lock and keeper

27-48-260

Extension Spring 8' Door - 260 lbs Brown

Single - Loop
27" long 48" stretch 260 lb load
Sold individually
Rated for 10000 cycles

Spec Sheet

27-48-140

Extension Spring 8' Door - 140 lbs Blue

Single - Loop
27" long 48" stretch 140 lb load
Sold individually
Rated for 10000 cycles

Spec Sheet

H12G07-SS

Hinge #7 x 12 gauge Stainless Steel

Manufactured with 12ga. Rust-Resistant Stainless Steel
Universal Design
Fits Most Overhead Sectional Doors
Priced Per Each

H12G02-SS

Hinge #2 x 12 gauge Stainless Steel

Manufactured with 12ga. Rust-Resistant Stainless Steel
Universal Design
Fits Most Overhead Sectional Doors
Priced Per Each

H12G01-SS

Hinge #1 x 12 gauge Stainless Steel ***NLA

Manufactured with 12ga. Rust-Resistant Stainless Steel
Universal Design
Fits Most Overhead Sectional Doors
Priced Per Each

KSWG-0623

LiftMaster Rear Connector with Pin for LA500DC

ME120-BLK-E-5FT

Miller Edge 2-Wire Black End Outlet 5 ft Long

Electromechanical slide in edge with a small profile for motorized gates and doors rolling shutters and pinch point protection applications.
Touch sensitive signaling
Temperature range: -30F to 155F
Lead wire: 18 gauge 2ft length
Sensitivity: nominal 4 PSI
2 wire NO configuration

.......more details

Installation Manual Sell Sheet

MOTOR258-WIRED

Manaras Electric Motor TEFC 3/4HP 120/240V 1PH Wired

Electric motor comes pre-wired for a brake
Must specify if operator is equipped with electronic circuit board or if it is hard-wired

MP00015

Micanan Up-Charge Track and #410 (#48) chain for 16' h Door *Actual length 222"*

For 1/3 HP and 1/2 HP operators only

9003-11FT-BLACK

Commercial Side & Top PVC Weather-Strip Reverse Angle 3" Track Bolt On 11' Long - Black

Black rigid vinyl retainer with black flexible vinyl insert.
Reverse angle bolt-on vinyl retainer.
Bolts onto reverse angle steel jamb.

Drawing

H031

Rolling Steel Slide Bolts and Holder Fire Door

SLT14-18

Rolling Steel 3" Flat Slat 18-ga Galvanized

SLT17-22P

Rolling Steel 2" Flat Slat 22-ga Primed

.375-6-RH-C

Torsion Spring .375 x 6" x 144" RH Coated ** Price by Quote Only

Black Oxide coating
Wire size painted on spring
Wire size: .375 ID: 6" Length: 12 ft

.363-6-LH-C

Torsion Spring .363 x 6" x 144" LH Coated ** Price by Quote Only

Black Oxide coating
Wire size painted on spring
Wire size: .363 ID: 6" Length: 12 ft

.363-6-RH-C

Torsion Spring .363 x 6" x 144" RH Coated ** Price by Quote Only

Black Oxide coating
Wire size painted on spring
Wire size: .363 ID: 6" Length: 12 ft

.331-6-RH-C

Torsion Spring .331 x 6" x 144" RH Coated ** Price by Quote Only

Black Oxide coating
Wire size painted on spring
Wire size: .331 ID: 6" Length: 12 ft

.331-2-5/8-RH-C

Torsion Spring .331 x 2-5/8" x 144" RH Coated ** Price by Quote Only

Black Oxide coating
Wire size painted on spring
Wire size: .331 ID: 2-5/8" Length: 12 ft

.319-6-RH-C

Torsion Spring .319 x 6" x 144" RH Coated ** Price by Quote Only

Black Oxide coating
Wire size painted on spring
Wire size: .319 ID: 6" Length: 12 ft

.295-5-1/4-LH-C

Torsion Spring .295 x 5-1/4" x 144" LH Coated ** Price by Quote Only

Black Oxide coating
Wire size painted on spring
Wire size: .295 ID: 5-1/4" Length: 12 ft

.283-2-LH-C

Torsion Spring .283 x 2" x 144" LH Coated ** Price by Quote Only

Black Oxide coating
Wire size painted on spring
Wire size: .283 ID: 2" Length: 12 ft

.262-3-3/4-RH-C

Torsion Spring .262 x 3-3/4" x 144" RH Coated ** Price by Quote Only

Black Oxide coating
Wire size painted on spring
Wire size: .262 ID: 3-3/4" Length: 12 ft

.262-2-LH-C

Torsion Spring .262 x 2" x 144" LH Coated ** Price by Quote Only

Black Oxide coating
Wire size painted on spring
Wire size: .262 ID: 2" Length: 12 ft

.250-2-RH-C

Torsion Spring .250 x 2" x 144" RH Coated ** Price by Quote Only

Black Oxide coating
Wire size painted on spring
Wire size: .250 ID: 2" Length: 12 ft

.243-2-RH-C

Torsion Spring .243 x 2" x 144" RH Coated ** Price by Quote Only

Black Oxide coating
Wire size painted on spring
Wire size: .243 ID: 2" Length: 12 ft

.234-2-LH-C

Torsion Spring .234 x 2" x 144" LH Coated ** Price by Quote Only

Black Oxide coating
Wire size painted on spring
Wire size: .234 ID: 2" Length: 12 ft

.218-2-RH-C

Torsion Spring .218 x 2" x 144" RH Coated ** Price by Quote Only

Black Oxide coating
Wire size painted on spring
Wire size: .218 ID: 2" Length: 12 ft

7515.1

Whiting Stainless Steel #77 Lock Handle Keeper

.306-334-R

Cut-to-Length Torsion Spring .306 x 3-3/4" Right Hand Wound Red

Priced per inch - cones sold seperately
For factory installed cones use part no. C-375-INSTALLED

K1D6597-1CC

LiftMaster Control Board with Heat Sink CSL24V & CSL24VH

Control board for CSL24V and CSL24VH gate operators
014D1058M

BK309

Jamb bracket J-09 #9 12 gauge

Sold by the piece
Height 4.25" Length 1.9" Width 2.45"
Bright zinc plated 12 gauge steel
2" long track mounting slot
manufactured to accept ¼” fasteners when attaching to the track and 5/16” to lag to the wall.

SOLID_SHAFT_20'

Solid Shaft 1" Keyed 20 ft Galvanized

Actual length is approx. 20'-1"

SPR41B12X1

Sprocket 41B12 1" Shaft 1/4" keyway 2SS 5/16"

SEL2641R433K8PM

Erone 800 User Receiver 433MHz

Multi-user receiver
800 two-channel transmitters + 7 master transmitters
Includes 1 master transmitter S2TR2641E2M for programming
12/24V AC/DC
Option: PC software kit # SEL2641KITP8 sold separately
1 NO relay + 1 NO/NC relay

.......more details

Installation manual Wireless System Chart

OGH-6236-ECB

Manaras 2 HP 208V 3Ph Gear Head Operator with Elect. Circuit Board

A heavy-duty worm gear industrial operator designed for use on industrial standard high and vertical lift sectional doors or rolling doors and grills.
Includes a self-engaging chain hoist for manual operation
25 cycles per hour 80 cycles a day
Hoist on right side standard can easily be moved to the left in field
Full overload protection
BRACKET112 must be used for wall mounting

.......more details

Installation Manual Sell Sheet

OGH-6433-ECB

Manaras 3/4 HP 480V 3Ph Gear Head Operator with Elect. Circuit Board

A heavy-duty worm gear industrial operator designed for use on industrial standard high and vertical lift sectional doors or rolling doors and grills.
Includes a self-engaging chain hoist for manual operation
25 cycles per hour 80 cycles a day
Hoist on right side standard can easily be moved to the left in field
Full overload protection
BRACKET112 must be used for wall mounting

.......more details

Installation Manual Sell Sheet

OTBH-6214-1-ECB

Manaras Trolley Operator 1 HP 240V 1 Ph with Electronic Circuit Board

Heavy-duty low headroom trolley operator designed for use on industrial standard lift sectional door
25 cycles per hour 80 cycles per day
It incorporates a drum-band type solenoid brake.
Tracks are an extra 36 lbs per track
3/4 HP & 1 HP operators come with #41 full roller chain

Installation Manual Sell Sheet

OSH-6214-ECB

Manaras Opera-SH 1 HP 240V 1 Ph with Electronic Circuit Board

An ultra high-end heavy-duty V-belt drive industrial jackshaft operator
For use on Standard High and Vertical Lift sectional doors
Can also be used on Rolling doors and Grilles
Comes with a chain hoist for manual operation and a floor level engaging device
Clearence: side room required 16"
25 cycles per day > 100 cycles per day

.......more details

Installation Manual Sell Sheet

OSH-6212-ECB

Manaras Opera-SH 1/2 HP 240V 1Ph with Electronic Circuit Board

An ultra high-end heavy-duty V-belt drive industrial jackshaft operator
For use on Standard High and Vertical Lift sectional doors
Can also be used on Rolling doors and Grilles
Comes with a chain hoist for manual operation and a floor level engaging device
Clearence: side room required 16"

Installation Manual Sell Sheet

OHJ-6234-ECB

Manaras Heavy-Duty Jackshaft Operator 1 HP 208V 3 Ph with Elect. Circuit Board

25 cycles per hour 100 cycles per day
An Industrial duty operator featuring both the patented Hoist-a-Matic a self-engaging chain hoist for manual operation as well as a floor level disconnect
Specifically designed to motorize grills when a manual egress is required
Mechanical brake
Hoist on right standard
Full overload protection

.......more details

Installation Manual Sell Sheet

OHJ-6233-ECB

Manaras Heavy-Duty Jackshaft Operator 3/4 HP 208V 3 Ph with Elect. Circuit Board

25 cycles per hour 100 cycles per day
An Industrial duty operator featuring both the patented Hoist-a-Matic a self-engaging chain hoist for manual operation as well as a floor level disconnect
Specifically designed to motorize grills when a manual egress is required
Mechanical brake
Hoist on right standard
Full overload protection

.......more details

Installation Manual Sell Sheet

OHJ-6112-ECB

Manaras Heavy-Duty Jackshaft Operator 1/2 HP 120V 1Ph with Elect. Circuit Board

25 cycles per hour 100 cycles per day
An Industrial duty operator featuring both the patented Hoist-a-Matic a self-engaging chain hoist for manual operation as well as a floor level disconnect
Specifically designed to motorize grills when a manual egress is required
Mechanical brake
Hoist on right standard
Full overload protection

.......more details