Devanco Canada - Get The Right Garage Door Opener‎ and Parts

SHAFT023

Manaras Intermediate Shaft for MJ operator

26-40018

Truck Door Bottom L-Retainer 84" Long for Todco Roll-Up Doors

Galvanized steel construction for extra strength and corrosion resistance.
Fits both standard and heavy-duty bottom seals.
Pre-punched holes for added convenience
Cross Reference: T #61191 W #4034 260000

.225-2-L

Cut-to-Length Torsion Spring .225 x 2" Left Hand Wound Orange/Green

Priced per inch - cones sold seperately
For factory installed cones use part no. C-200-INSTALLED

.234-134-R

Cut-to-Length Torsion Spring .234 x 1-3/4" Right Hand Wound Blue/White

Priced per inch - cones sold seperately
For factory installed cones use part no. C-134-INSTALLED

.225-134-R

Cut-to-Length Torsion Spring .225 x 1-3/4" Right Hand Wound Orange/Green

Priced per inch - cones sold seperately
For factory installed cones use part no. C-134-INSTALLED

2806.139*140

Whiting Spring Assby .139 x 2-3/16 x 14" L Roadside

Replacement torsion spring with cones for Whiting Door Serial # 138631
Specs: .139 x 2-3/16" x 14" Long
Roadside
For Curbside order part # 2807.139.140

7001-14-W/B

Commercial Side & Top Weather-Strip 14' Long - White and Black (WB)

White galvanized steel with black dual fin vinyl.
Commercial and Residential use.
Steel is notched on both ends for easier installation.
Full case quantity only (10)

ME113-E

Miller Edge Black End Outlet 2-Wire 1-1/2" wide x 1-1/2" high Sold by the Foot

Slide in edge designed for commercial sectional doors
Retrofits easily to 1-1/4" to 1-1/2" sectional doors
Touch sensitive signaling allows for immedita stopping or reversing of motion
For a sectional door: measure the daylight opening of the door or measure the panel width of the door
This gives you the "active length" of the edge - the length to order.
Lead wire: 22 gauge universal

.......more details

Installation Manual Worksheet Sell Sheet

ME112-E

Miller Edge Black 2W Non Monitored End Outlet 1-5/16" wide x 1-1/2" high Sold by the Foot

Slide in edge designed for commercial sectional doors and gates.
Retrofits easily to 1" to 1-1/4" sectional doors
Touch sensitive signaling allows for immediate stopping/reversing of motion
For sectional doors: measure the daylight opening of the door or measure the panel width of the door
This gives you the "active length" of the edge - the length to order
Lead wire: 22 gauge univversal

.......more details

Installation Manual Worksheet Sell Sheet

ME113-C3

Miller Edge PVC Mounting Channel "L" Shape Sold by the Foot

TUBE_SHAFT_17-STL

Hollow Shaft 1" x 17'-0" Steel 13 gauge

When ordering order one foot longer than actual door width.

.437_6"-LH

Torsion Spring .437 x 6" x 12ft LH Red/Green

Wire size: .437
Inside diameter: 6"
Length: 12 ft

.393_6"-LH

Torsion Spring .393 x 6" x 12ft LH Orange

Wire size: .393
Inside diameter: 6"
Length: 12 ft

.319_6"-LH

Torsion Spring .319 x 6" x 12ft LH Blue/Green

Wire size: .319
Inside diameter: 6"
Length: 12 ft

.295_5-1/4"-LH

Torsion Spring .295 x 5-1/4" x 12ft LH Blue

Wire size: .295
Inside diameter: 5-1/4"
Length: 12 ft

.343_3-3/4"-LH

Torsion Spring .343 x 3-3/4" x 12ft LH Blue/Red

Wire size: .343
Inside diameter: 3-3/4"
Length: 12 ft

.225_2"-LH

Torsion Spring .225 x 2" x 12ft LH Orange/Green

Wire size: .225
Inside diameter: 2"
Length: 12 ft

71-B240H

LiftMaster Interior Brake Kit with Cable 230-460V (Logic 3 4 and early 5 Disc and Pad Models)

Interior mount brake kit for operation with chain hoist

Instruction Manual

19-40ML

Master Link #40

For #40 chain
ANSI Standard Carbon Steel

.375_6"-RH

Torsion Spring .375 x 6" x 12ft RH Yellow/Green

Wire size: .375
Inside diameter: 6"
Length: 12 ft

.393_6"-RH

Torsion Spring .393 x 6" x 12ft RH Orange

Wire size: .393
Inside diameter: 6"
Length: 12 ft

.468_5-1/4"-RH

Torsion Spring .468 x 5-1/4" x 12ft RH Blue/Orange. **NLA

Wire size: .468
Inside diameter: 5-1/4"
Length: 12 ft

.283_5-1/4"-RH

Torsion Spring .283 x 5-1/4" x 12ft RH White

Wire size: .283
Inside diameter: 5-1/4"
Length: 12 ft

.273_3-3/4"-RH

Torsion Spring .273 x 3-3/4" x 12ft RH Orange/Red

Wire size: .273
Inside diameter: 3-3/4"
Length: 12 ft

.306_2-5/8"-RH

Torsion Spring .306 x 2-5/8" x 12ft RH Red

Wire size: .306
Inside diameter: 2-5/8"
Length: 12 ft

.295_2-5/8"-RH

Torsion Spring .295 x 2-5/8" x 12ft RH Blue

Wire size: .295
Inside diameter: 2-5/8"
Length: 12 ft

.207_2"-RH

Torsion Spring .207 x 2" x 12ft RH Brown

Wire size: .207
Inside diameter: 2"
Length: 12 ft

MJ00002

Micanan Brake Shoe - Right **No Longer Available**

Only available in complete kit # MJ00013 or MJ00014 for PRO-GH

CP-SW-HOIST

Lynx Interlock Switch

CP-CRG-OLD

Lynx Auto Re-Connect Carriage 20-1/2" Arm Sold Separately *** Discontinued

Will work on most brands of commercial trolley operators using 2" angle tracks.

2376.192_31.930

Whiting Torsion assembly .192 wire size 31" spring length 93" shaft

This is a full balancer assembly
Twin springs one road one curb with a shaft through it

2235.296

Whiting Coldsaver Bottom Panel 14-1/2" x xxx" with lock seal and retainer (Max 96")

Fits Coldsaver Roll-Up Doors
1-1/8" thick max 96" wide
Includes Lock and keeper

1336.3

Whiting Curbside Top Panel Closure Bracket for 8" radius track

MCT-3

Linear 3-btn MegaCode Transmitter 318 MHz ** Use MTS3

Activates three 318 MHz MegaCode receivers
Test/operate LED
Visor mounting clip supplied
Two CR2032 batteries included
Codes: 1000000+ (MegaCode format)
Dimensions: 3" W x 1.875" H x .625" D

.......more details

Programming Instructions

41A2816

Jobber Drive Gear for Chamberlain Sears LiftMaster residential operators

Drive gear for Chamberlain / LiftMaster / Sears residential garage door openers built 1984 +
This is an excellent quality aftermarket product

218014-02

Lamp Socket Assembly

For models LSO LCO LDO

1336.7

Whiting Stainless Steel Curbside Top Closure Bracket for 8" radius

RV-100

1" Vinyl Insert for Brush Retainer per foot

Color: Black
Fits in light brush retainers

1003-2-24'

Aluminum Bottom Retainer L-Shaped 24' Long

For 2" thick doors.

1003-1-5/8-16'

Aluminum Bottom Retainer L-Shaped

For 1-5/8" thick doors.

1003-1-5/8-24'

Aluminum Bottom Retainer L-Shaped

For 1-5/8" thick doors.
DIE # ES18010

1003-1-3/8-14'

Aluminum Bottom Retainer L-Shaped

For 1-3/8" thick doors.

7001-8-BROWN

Commercial Side & Top Weather-Strip 8' Long - Brown (DN)

Brown galvanized steel with brown dual fin vinyl.
Commercial and Residential use.
Steel is notched on both ends for easier installation.

7001-16-WHITE

Commercial Side & Top Weather-Strip 16' Long - White (W)

White galvanized steel with white dual fin vinyl.
Commercial and Residential use.
Steel is notched on both ends for easier installation.

1106-24-BLACK

Commercial Side & Top Weather-Strip 24' Long - Black

Aluminum retainer with black dual fin vinyl

1106-12-BLACK

Commercial Side & Top Weather-Strip 12' Long - Black

Aluminum retainer with black dual fin vinyl

1106-8-BLACK

Commercial Side & Top Weather-Strip 8' Long - Black

Aluminum retainer with black dual fin vinyl

95-00116

Truck Door Rivet 1-1/4" Stainless Steel ** To Extent of Inventoy

Stainless steel construction
Round head design
Cross Reference: T #89217-0040

CBB125

Stop & Sleeve 1/4" 100 pair

Includes 100 stops and 100 oval sleeves

CUSTOM4X8PO

Devanco Loop 4'x8' rigid-pvc pave-over

Ideal for use on with gravel driveways or sufaces that are to be asphalted
Features a twisted lead-in to reduce the chances of interference and false detections.
Direct burial loops should be buried approximately 6" deep

Installation Instructions Instructions d'installation Spec Sheet Brochure Loop Placement Guide Guide de positionnement des boucles

6X20PO50

Devanco Loop 6' x 20' pave-over 50' lead-in

Ideal for use on with gravel driveways or surfaces that are to be asphalted
Features a twisted lead-in to reduce the chances of interference and false detections.
Direct burial loops should be buried approximately 6" deep

Installation Instructions Instructions d'installation Spec Sheet Brochure Loop Placement Guide Guide de positionnement des boucles

6X24PO50

Devanco Loop 6' x 24' pave-over 50' lead-in

Ideal for use on with gravel driveways or surfaces that are to be asphalted
Features a twisted lead-in to reduce the chances of interference and false detections.
Direct burial loops should be buried approximately 6" deep

Installation Instructions Instructions d'installation Spec Sheet Brochure Loop Placement Guide Guide de positionnement des boucles

K75-19985

LiftMaster Clutch Pulley Assembly

Fits model H operator with Logic 5

EAST/STL-E3

Rolling Steel 3" Cast Eastern Steel Endlock

Endlocks are riveted to curtain slats ends of every other slat to prevent slats from shifting laterally and to prevent curtain wear in guides.
Continuous endlocks are both ends of every slat.
Rivets included with endlocks

126474-7K

Spring Failure Device For 1" Shaft RH & LH Assembly

Designed to reduce the risk of the door falling in the event of spring breakage
3-3/8" offset between wall and shaft (separate extension bracket available for offset of 4-3/8" up to 6")
For 1" shaft (1-1/4" shaft available for special order)
Fits 1-3/4"-6" Torsion Springs
One device per spring is required
Not for use with duplex springs

.......more details

BB-1

Rubber Button Cover Black for 3BLM PBS

Rubber button cover only

2704.135.140

Whiting Roadside Torsion Spring 2-3/16" ID 14" Long

Torsion spring wire only
.135 wire size

MD-00201

Sprocket 50B40 x 1-1/2" 3/8" KW 2SS 5/16"

23-34815

LiftMaster Stop / Reset Switch

Rocker switch 1A 12VDC

MU33-2WIRE-LH-Y

Miller Edge MU33 2-Wire NM Left Hand Yellow - Sold per Foot

MU style bumpers are designed for use with aircraft hanger doors and large specialty doors.
Must specify the exact length in feet and inches when ordering.
Mounts vertically or horizontally
Sensitivity: nominal 8-13 ibf

Worksheet

7207

Whiting Balancer Bracket Center for Whiting Roll-Up Doors For #7176 Balancer

Steel construction
Plain finish
Whiting original

OTBH-6233-1-M-N1

Manaras Trolley Operator 3/4 HP 208V 3 Ph Monitored w/N1 Photoeyes

Heavy-duty low headroom trolley operator designed for use on industrial standard lift sectional door
25 cycles per hour 80 cycles per day
It incorporates a drum-band type solenoid brake.
Tracks are an extra 36 lbs per track
3/4 HP & 1 HP operators come with #41 full roller chain

DHJ501L5-RH

LiftMaster Ind. Duty Hoist/Jackshaft Op. 1/2 HP 115/230 VAC Logic 5 Right Hand***Discontinued

Industrial-Duty Hoist/Jackshaft Operator with Internal Door Lock Sensor
Optimal for shopping mall applications with heavier rolling doors and grilles.
Provides a floor level chain hoist to ease manual operation in an emergency or power outage.
Includes a door lock sensor to prevent damage to the door and operator caused by attempts to automatically open a locked door.
Industrial Ball Bearings on 1" Output Shaft
Second Floor-Level Disconnect for Manual Lifting in an Emergency

.......more details

41A6102-NOBOX

LiftMaster Power Door Lock Connector with 2 pins No Box

For Jackshaft models

MT21-BLACK-RH

Miller Edge 2-Wire Pressure Sensitive Edge Black Right Hand Outlet Sold per Foot

��Electromechanical medium profile edge for rolling fire door applications. •Touch sensitive signaling allows for immediate reversing or stopping of motion. •The MT21 is completely felixible and will contour to curved surfaces. The MT21 will also act as weatherstrip. •Temperature range: -30F to 155F •Lead wire: 22 gauge universal •Sensitivity: nominal 6-8 PSI •2 wire NO configuration •Horizontal mount •ANSI/UL325 recognized component •One year warranty

Worksheet Installation manual Sell sheet

MK-00546

Micanan Heater Probe in Reducer Mod. (24V 20W 3/8" NPT)

CPE

Erone Proximity Card Standard *** To Extent of Inventory

Hexadecimal number printed on each badge
8mm thick

MK-00049

Micanan Overload Reset 3-Phase 1.8 - 2.6 Amps

1019-1-3/8-16'

Rigid Vinyl Bottom Retainer Flat 16' Long

Black - for door thickness of 1-3/8"

1104-12FT-CREAM

Residential Side & Top PVC Weather-Strip with cap 12' Long - Cream (C)

Cream rigid vinyl retainer with cream flexible vinyl seal.
Dual fin vinyl.
Comes with cap to hide screws.
Also known as Almond

.207-3-7.5-RHW

Mini Storage Spring .207 x 3" x 7.5" long Right Hand

PRO-H-5081-U-RH

Micanan 1/2HP 208V 1P Hoist Operator N1 Eyes Monitored ECB Right Hand

Continuous duty belt drive jackshaft operator with emergency chain hoist
Full function Smart 10.0 Logic control board featuring on-board receiver with antenna
Nema 1 photoeyes included
Solenoid brake OPTIONAL
On-Board receiver holds up to 20 transmitters

SPR50B36X1

Sprocket 50B36 1" shaft 1/4" KW

36 tooth sprocket for #50 chain

2376.156.145.550

Whiting Torsion assembly .156 wire size 14-1/2" spring length 55" shaft

SL18COP

Copper Sleeve 1/8" 100 Sleeves per Pkg *price on request

Oval sleeves ONLY
Stops sold separately part # ST18COP

PRO-HB-7553U-LH

Micanan 3/4HP 575V 3P Hoist Op. with Brake N1 Eyes Monitored ECB Left Hand

Continuous duty belt drive jackshaft operator with emergency chain hoist
Full function Smart 10.0 Logic control board featuring on-board receiver with antenna
Nema 1 photoeyes included
Solenoid brake included

5001-8-CREAM

Residential Side & Top Weather-Strip 8' Long - Cream

Painted aluminum retainer with flexible dual fin vinyl.
Residential use.

340.115

Whiting Top Panel Tongue & Groove 11-1/2" x 96"

Primer only
Standard size panel

6X20SC50

Devanco Loop 6' x 20' Saw-cut 50' lead-in

Manufactured to the highest quality standards to ensure accurate detection our Pre-formed loops come with a 50 foot twisted lead-in ware and available lead-in lengths up to 500 feet.
Ideal for use on existing asphalt or concrete surfaces
Features a non spliced continuous wire throughout loop turns and lead-in.
Requires the use of loop sealer when being installed to ensure long lasting trouble-free detection

Installation Instructions Instructions d'installation Loop Placement Guide Guide de positionnement des boucles

K001A6424-2

LiftMaster Circuit Board Assembly Kit 2008 315 MHz *** No longer available

Replacement circuit board for Medium-Duty Logic Commercial Operators
Used on models MJ MH MHS MT BMT and MGJ (non- UL325 compliant operators)
315 MHz intergral radio receiver accepts 20 Sec+ remotes or unlimited dip switch

Installation Manual

27-24402

Truck Door Dual Torsion Spring Assembly 87/35 for Whiting Roll-Up Doors

Assembly includes: shaft LH & RH springs winding cones cable drums with bearings and spring spacers.
Springs are treated with rust preventative
Roadside cable drum is color coded RED
Specs: Shaft Length: 87" Spring Length: 35" Wire diameter: .187 -
Winding cone color: White

XP4040CUSH689

Heavy Duty Door Closer

Heavy Duty Door Closer with Spring Cush-N-Stop Arm

510.3920.06

Whiting Stainless Steel Rivets Option for Dry Freight Door 4-Rows of Hinges 6 Panels

Upgrade option

7001-8-BLACK

Commercial Side & Top Weather-Strip 8' Long - Black (Code B)

Black galvanized steel with black dual fin vinyl.
Commercial and Residential use.
Steel is notched on both ends for easier installation.

CGH103L5-RH

LiftMaster Gearhead w/ Brake and Carwash Mod. 1 HP 208/230/460V 3-Phase Logic 5 Right Hand

Requires 828LM MyQ Internet Gateway to connect to MyQ Smartphone App.
Security+ 2.0®
Includes CPS-UN4

CB5160500-KOR

Cable 5/16" 7x19 500' Galvanized

Galvanized Cable 5/16" 7x19 500ft spool.
Meets endurance test requirements of over 35000 work cycles
Lubricated for flexability and longer service life

1004-134-12'

Aluminum Bottom Retainer 1 3/4" U-Shape with Reinforcement 12 ft**Actual Length 12'2"***

For door thickness 1-3/4"

MGH-6436-M-N1-LH

Manaras 2 HP 480V 3P Jackshaft Monitored w/N1 Eyes Left Hand

A very heavy-duty worm gear industrial operator designed for use on Industrial standard high and vertical lift sectional or rolling doors and grilles.
It incorporates a chain hoist for manual operation with a floor level engaging device with electrical cut-out
Electrically activated drum-band type solenoid brake
Full overload protection

K77-39426

LiftMaster Operator Cover with labels keys and lock assembly Gray CSL24UL

This is a made to order replacement part. Please allow extended lead time due to manufacturing and shipping for all made to order LiftMaster® parts
Compatible with LiftMaster® CSL24UL Series Commercial Slide Gate Operators and Perimeter Access Solutions.

K41-0354-000

LiftMaster Replacement Door for IHSL and INSL

Compatible with the IHSL and INSL

EHJX-353-3/4

Doorlec Industrial Jackshaft Op. Explosion Proof 3/4 HP 575V-3Ph ** Price on Request

Explosion proof NEMA 7/9 Heavy-Duty Industrial Operator
DC-2000 logic with adjustable Timer To Close Delay On Reverse.
Solenoid Brake prevents coasting and secures the door when closed
Explosion-proof (sealed) continuous-duty electric motor with overload protection
Automatic Friction Clutch protects the door and operator
Self-aligning Heavy Duty sealed Pillow Block bearings on all shafts for high cycle applications

.......more details